All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Cc: linux-pm@vger.kernel.org, Zhang Rui <rui.zhang@intel.com>,
	Eduardo Valentin <edubezval@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Simon Horman <horms@verge.net.au>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH/RFT v2 1/3] thermal: rcar_gen3_thermal: Update value of Tj_1
Date: Thu, 18 Apr 2019 10:40:41 +0200	[thread overview]
Message-ID: <20190418084041.GW28515@bigcity.dyn.berto.se> (raw)
In-Reply-To: <1555436655-5262-2-git-send-email-ykaneko0929@gmail.com>

Hi Kaneko-san,

Thanks for your work.

On 2019-04-17 02:44:13 +0900, Yoshihiro Kaneko wrote:
> As evaluation of hardware team, temperature calculation formula
> of M3-W is difference from all other SoCs as below:
> - M3-W: Tj_1: 116 (so Tj_1 - Tj_3 = 157)
> - Others: Tj_1: 126 (so Tj_1 - Tj_3 = 167)
> 
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> ---
>  drivers/thermal/rcar_gen3_thermal.c | 41 +++++++++++++++++++++++++++----------
>  1 file changed, 30 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
> index 88fa41c..a2fd0fd 100644
> --- a/drivers/thermal/rcar_gen3_thermal.c
> +++ b/drivers/thermal/rcar_gen3_thermal.c
> @@ -124,11 +124,11 @@ static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc,
>  #define RCAR3_THERMAL_GRAN 500 /* mili Celsius */
>  
>  /* no idea where these constants come from */
> -#define TJ_1 116
>  #define TJ_3 -41
>  
>  static void rcar_gen3_thermal_calc_coefs(struct equation_coefs *coef,
> -					 int *ptat, int *thcode)
> +					 int *ptat, int *thcode,
> +					 unsigned int ths_tj_1)

I would move tj_1 inside struce rcar_gen3_thermal_tsc as you in 2/3 move 
tj_2 there. You could still keep the value in .data but init the tj_1 in 
the struct at probe instead of passing it as an argument.

>  {
>  	int tj_2;
>  
> @@ -139,15 +139,15 @@ static void rcar_gen3_thermal_calc_coefs(struct equation_coefs *coef,
>  	 * the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled
>  	 */
>  	tj_2 = (FIXPT_INT((ptat[1] - ptat[2]) * 157)
> -		/ (ptat[0] - ptat[2])) - FIXPT_INT(41);
> +		/ (ptat[0] - ptat[2])) + FIXPT_INT(TJ_3);
>  
>  	coef->a1 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[2]),
>  			     tj_2 - FIXPT_INT(TJ_3));
>  	coef->b1 = FIXPT_INT(thcode[2]) - coef->a1 * TJ_3;
>  
>  	coef->a2 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[0]),
> -			     tj_2 - FIXPT_INT(TJ_1));
> -	coef->b2 = FIXPT_INT(thcode[0]) - coef->a2 * TJ_1;
> +			     tj_2 - FIXPT_INT(ths_tj_1));
> +	coef->b2 = FIXPT_INT(thcode[0]) - coef->a2 * ths_tj_1;
>  }
>  
>  static int rcar_gen3_thermal_round(int temp)
> @@ -318,12 +318,29 @@ static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
>  	usleep_range(1000, 2000);
>  }
>  
> +static const unsigned int rcar_gen3_ths_tj_1 = 126;
> +static const unsigned int rcar_gen3_ths_tj_1_m3_w = 116;
>  static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
> -	{ .compatible = "renesas,r8a774a1-thermal", },
> -	{ .compatible = "renesas,r8a7795-thermal", },
> -	{ .compatible = "renesas,r8a7796-thermal", },
> -	{ .compatible = "renesas,r8a77965-thermal", },
> -	{ .compatible = "renesas,r8a77980-thermal", },
> +	{
> +		.compatible = "renesas,r8a774a1-thermal",
> +		.data = &rcar_gen3_ths_tj_1_m3_w,
> +	},
> +	{
> +		.compatible = "renesas,r8a7795-thermal",
> +		.data = &rcar_gen3_ths_tj_1,
> +	},
> +	{
> +		.compatible = "renesas,r8a7796-thermal",
> +		.data = &rcar_gen3_ths_tj_1_m3_w,
> +	},
> +	{
> +		.compatible = "renesas,r8a77965-thermal",
> +		.data = &rcar_gen3_ths_tj_1,
> +	},
> +	{
> +		.compatible = "renesas,r8a77980-thermal",
> +		.data = &rcar_gen3_ths_tj_1,
> +	},
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
> @@ -349,6 +366,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
>  {
>  	struct rcar_gen3_thermal_priv *priv;
>  	struct device *dev = &pdev->dev;
> +	const unsigned int *rcar_gen3_ths_tj_1 = of_device_get_match_data(dev);
>  	struct resource *res;
>  	struct thermal_zone_device *zone;
>  	int ret, irq, i;
> @@ -422,7 +440,8 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
>  		priv->tscs[i] = tsc;
>  
>  		priv->thermal_init(tsc);
> -		rcar_gen3_thermal_calc_coefs(&tsc->coef, ptat, thcode[i]);
> +		rcar_gen3_thermal_calc_coefs(&tsc->coef, ptat, thcode[i],
> +					     *rcar_gen3_ths_tj_1);
>  
>  		zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,
>  							    &rcar_gen3_tz_of_ops);
> -- 
> 1.9.1
> 

-- 
Regards,
Niklas Söderlund

  reply	other threads:[~2019-04-18  8:40 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-16 17:44 [PATCH/RFT v2 0/3] thermal: rcar_gen3_thermal: Update calculation formula due to HW evaluation Yoshihiro Kaneko
2019-04-16 17:44 ` [PATCH/RFT v2 1/3] thermal: rcar_gen3_thermal: Update value of Tj_1 Yoshihiro Kaneko
2019-04-18  8:40   ` Niklas Söderlund [this message]
2019-05-08  6:23     ` Yoshihiro Kaneko
2019-04-24 14:54   ` Simon Horman
2019-05-08  6:36     ` Yoshihiro Kaneko
2019-05-08 10:14       ` Simon Horman
2019-04-16 17:44 ` [PATCH/RFT v2 2/3] thermal: rcar_gen3_thermal: Update calculation formula of IRQTEMP Yoshihiro Kaneko
2019-04-18  8:53   ` Niklas Söderlund
2019-04-16 17:44 ` [PATCH/RFT v2 3/3] thermal: rcar_gen3_thermal: Update temperature conversion method Yoshihiro Kaneko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190418084041.GW28515@bigcity.dyn.berto.se \
    --to=niklas.soderlund@ragnatech.se \
    --cc=edubezval@gmail.com \
    --cc=horms@verge.net.au \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=ykaneko0929@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.