From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: p.zabel@pengutronix.de, robh+dt@kernel.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
haitao.suo@bitmain.com, darren.tsao@bitmain.com,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH 3/3] reset: Add reset controller support for BM1880 SoC
Date: Thu, 25 Apr 2019 18:25:08 +0530 [thread overview]
Message-ID: <20190425125508.5965-4-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20190425125508.5965-1-manivannan.sadhasivam@linaro.org>
Add reset controller support for Bitmain BM1880 SoC reusing the
reset-simple driver. While we are at it, this driver has also been
modified to make use of the SPDX license identifier.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
drivers/reset/Kconfig | 3 ++-
drivers/reset/Makefile | 1 +
drivers/reset/reset-simple.c | 16 +++++++++++-----
3 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 2c8c23db92fb..b25e8d139f0d 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -117,7 +117,7 @@ config RESET_QCOM_PDC
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST
- default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
+ default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN
help
This enables a simple reset controller driver for reset lines that
that can be asserted and deasserted by toggling bits in a contiguous,
@@ -129,6 +129,7 @@ config RESET_SIMPLE
- RCC reset controller in STM32 MCUs
- Allwinner SoCs
- ZTE's zx2967 family
+ - Bitmain BM1880 SoC
config RESET_STM32MP157
bool "STM32MP157 Reset Driver" if COMPILE_TEST
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 61456b8f659c..b87968771166 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
obj-$(CONFIG_RESET_AXS10X) += reset-axs10x.o
obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
+#obj-$(CONFIG_RESET_BM1880) += reset-bm1880.o
obj-$(CONFIG_RESET_BRCMSTB) += reset-brcmstb.o
obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o
obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
index 77fbba3100c8..fd1fa4984d76 100644
--- a/drivers/reset/reset-simple.c
+++ b/drivers/reset/reset-simple.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Simple Reset Controller Driver
*
@@ -8,11 +9,6 @@
* Copyright 2013 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#include <linux/device.h>
@@ -119,6 +115,14 @@ static const struct reset_simple_devdata reset_simple_active_low = {
.status_active_low = true,
};
+#define BM1880_NR_BANKS 2
+
+static const struct reset_simple_devdata reset_simple_bm1880 = {
+ .nr_resets = BM1880_NR_BANKS * 32,
+ .active_low = true,
+ .status_active_low = true,
+};
+
static const struct of_device_id reset_simple_dt_ids[] = {
{ .compatible = "altr,stratix10-rst-mgr",
.data = &reset_simple_socfpga },
@@ -129,6 +133,8 @@ static const struct of_device_id reset_simple_dt_ids[] = {
.data = &reset_simple_active_low },
{ .compatible = "aspeed,ast2400-lpc-reset" },
{ .compatible = "aspeed,ast2500-lpc-reset" },
+ { .compatible = "bitmain,bm1880-reset",
+ .data = &reset_simple_bm1880 },
{ /* sentinel */ },
};
--
2.17.1
next prev parent reply other threads:[~2019-04-25 12:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-25 12:55 [PATCH 0/3] Add reset controller support for BM1880 SoC Manivannan Sadhasivam
2019-04-25 12:55 ` [PATCH 1/3] dt-bindings: reset: Add devicetree binding for BM1880 reset controller Manivannan Sadhasivam
2019-05-02 0:43 ` Rob Herring
2019-05-02 0:43 ` Rob Herring
2019-04-25 12:55 ` [PATCH 2/3] arm64: dts: bitmain: Add reset controller support for BM1880 SoC Manivannan Sadhasivam
2019-04-25 12:55 ` Manivannan Sadhasivam [this message]
2019-05-03 14:55 ` [PATCH 3/3] reset: " Philipp Zabel
2019-05-08 15:53 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190425125508.5965-4-manivannan.sadhasivam@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=darren.tsao@bitmain.com \
--cc=devicetree@vger.kernel.org \
--cc=haitao.suo@bitmain.com \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.