From mboxrd@z Thu Jan  1 00:00:00 1970
From: sbabic at denx.de <sbabic@denx.de>
Date: Fri, 26 Apr 2019 09:38:42 +0000 (UTC)
Subject: [U-Boot] [U-Boot, v2,
	06/14] board: imx6ull: Add disable PMIC_STBY_REQ
In-Reply-To: <20190409152420.11394-7-marcel@ziswiler.com> Philippe Schenker
 <philippe.schenker@toradex.com>, Igor Opaniuk <igor.opaniuk@toradex.com>,
 Toradex ARM Support <support.arm@toradex.com>, Stefan Agner
 <stefan.agner@toradex.com>
Message-ID: <20190426094011.C8534C21F3C@lists.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> From: Philippe Schenker <philippe.schenker@toradex.com>
> Disable output driver of PAD CCM_PMIC_STBY_REQ. This prevents the
> SOC to request for a lower voltage during sleep. This is necessary
> because the voltage is changing too slow for the SOC to wake up
> properly.
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================