All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH 0/3] add new wdt driver for sp805
@ 2019-04-29  8:24 Qiang Zhao
  2019-04-29  8:24 ` [U-Boot] [patch v2 1/3] watchdog: add sp805 watchdog support Qiang Zhao
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Qiang Zhao @ 2019-04-29  8:24 UTC (permalink / raw)
  To: u-boot

changes for v2:
	- modify the driver to DM

Zhao Qiang (3):
  watchdog: add sp805 watchdog support
  dts: fsl-ls1028a: add sp805 node which is a watchdog
  defconfig: ls1028ardb: enable wdt

 MAINTAINERS                   |   1 +
 arch/arm/dts/fsl-ls1028a.dtsi |   4 ++
 configs/ls1028ardb_defconfig  |   3 +
 drivers/watchdog/Kconfig      |   7 ++
 drivers/watchdog/Makefile     |   1 +
 drivers/watchdog/sp805_wdt.c  | 126 ++++++++++++++++++++++++++++++++++
 6 files changed, 142 insertions(+)
 create mode 100644 drivers/watchdog/sp805_wdt.c

-- 
2.17.1

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [U-Boot] [patch v2 1/3] watchdog: add sp805 watchdog support
  2019-04-29  8:24 [U-Boot] [PATCH 0/3] add new wdt driver for sp805 Qiang Zhao
@ 2019-04-29  8:24 ` Qiang Zhao
  2019-04-29  8:38   ` Stefan Roese
  2019-04-29  8:24 ` [U-Boot] [patch v2 2/3] dts: fsl-ls1028a: add sp805 node which is a watchdog Qiang Zhao
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 7+ messages in thread
From: Qiang Zhao @ 2019-04-29  8:24 UTC (permalink / raw)
  To: u-boot

sp805 is watchdog on some NXP layerscape SoCs, Now add its driver in uboot.
To add
	CONFIG_WDT_SP805=y
	CONFIG_WDT=y
	CONFIG_CMD_WDT=y
in defconfig to use it.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
 MAINTAINERS                  |   1 +
 drivers/watchdog/Kconfig     |   7 ++
 drivers/watchdog/Makefile    |   1 +
 drivers/watchdog/sp805_wdt.c | 126 +++++++++++++++++++++++++++++++++++
 4 files changed, 135 insertions(+)
 create mode 100644 drivers/watchdog/sp805_wdt.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 8f237128b2..e8e7a92802 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -410,6 +410,7 @@ FREESCALE QORIQ
 M:	York Sun <york.sun@nxp.com>
 S:	Maintained
 T:	git git://git.denx.de/u-boot-fsl-qoriq.git
+F:	drivers/watchdog/sp805_wdt.c
 
 I2C
 M:	Heiko Schocher <hs@denx.de>
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b06c5447f6..29e04630d2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -95,6 +95,13 @@ config WDT_ORION
 	   Select this to enable Orion watchdog timer, which can be found on some
 	   Marvell Armada chips.
 
+config WDT_SP805
+	bool "SP805 watchdog timer support"
+	depends on WDT
+	help
+	   Select this to enable SP805 watchdog timer, which can be found on some
+	   nxp layerscape chips.
+
 config WDT_CDNS
 	bool "Cadence watchdog timer support"
 	depends on WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 19c631bb58..eb285bde24 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_BCM2835_WDT)       += bcm2835_wdt.o
 obj-$(CONFIG_WDT_ORION) += orion_wdt.o
 obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o
 obj-$(CONFIG_MPC8xx_WATCHDOG) += mpc8xx_wdt.o
+obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
new file mode 100644
index 0000000000..e4d81c995d
--- /dev/null
+++ b/drivers/watchdog/sp805_wdt.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog driver for SP805 on some Layerscape SoC
+ *
+ * Copyright 2019 NXP
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <dm/device.h>
+#include <dm/fdtaddr.h>
+#include <dm/read.h>
+#include <linux/bitops.h>
+#include <watchdog.h>
+#include <wdt.h>
+
+#define WDTLOAD			0x000
+#define WDTCONTROL		0x008
+#define WDTINTCLR		0x00C
+#define WDTLOCK			0xC00
+
+#define TIME_OUT_DEFAULT_MSECS	15000
+#define TIME_OUT_MIN_MSECS	1
+#define TIME_OUT_MAX_MSECS	120000
+#define SYS_FSL_WDT_CLK_DIV	16
+#define INT_ENABLE		BIT(0)
+#define RESET_ENABLE		BIT(1)
+#define DISABLE			0
+#define UNLOCK			0x1ACCE551
+#define LOCK			0x00000001
+#define INT_MASK		BIT(0)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct sp805_wdt_priv {
+	void __iomem *reg;
+	u32 timeout;
+};
+
+static int sp805_wdt_reset(struct udevice *dev)
+{
+	struct sp805_wdt_priv *priv = dev_get_priv(dev);
+
+	writel(UNLOCK, priv->reg + WDTLOCK);
+	writel(INT_MASK, priv->reg + WDTINTCLR);
+	writel(LOCK, priv->reg + WDTLOCK);
+	readl(priv->reg + WDTLOCK);
+
+	return 0;
+}
+
+static int sp805_wdt_start(struct udevice *dev, u64 timeout, ulong flags)
+{
+	u32 load_value;
+	struct sp805_wdt_priv *priv = dev_get_priv(dev);
+
+	priv->timeout = (u32)timeout;
+	if (timeout < TIME_OUT_MIN_MSECS || timeout > TIME_OUT_MAX_MSECS)
+		priv->timeout = TIME_OUT_DEFAULT_MSECS;
+	/* sp805 runs counter with given value twice, so when the timeout is
+	 * set 15s, the gd->bus_clk is less than 9162MHz, the load_value will
+	 * not overflow.
+	 */
+	load_value = (gd->bus_clk) /
+		(2 * 1000 * SYS_FSL_WDT_CLK_DIV) * priv->timeout;
+
+	writel(UNLOCK, priv->reg + WDTLOCK);
+	writel(load_value, priv->reg + WDTLOAD);
+	writel(INT_MASK, priv->reg + WDTINTCLR);
+	writel(INT_ENABLE | RESET_ENABLE, priv->reg + WDTCONTROL);
+	writel(LOCK, priv->reg + WDTLOCK);
+	readl(priv->reg + WDTLOCK);
+
+	return 0;
+}
+
+static int sp805_wdt_stop(struct udevice *dev)
+{
+	struct sp805_wdt_priv *priv = dev_get_priv(dev);
+
+	writel(UNLOCK, priv->reg + WDTLOCK);
+	writel(DISABLE, priv->reg + WDTCONTROL);
+	writel(LOCK, priv->reg + WDTLOCK);
+	readl(priv->reg + WDTLOCK);
+
+	return 0;
+}
+
+static int sp805_wdt_probe(struct udevice *dev)
+{
+	debug("%s: Probing wdt%u\n", __func__, dev->seq);
+
+	return 0;
+}
+
+static int sp805_wdt_ofdata_to_platdata(struct udevice *dev)
+{
+	struct sp805_wdt_priv *priv = dev_get_priv(dev);
+
+	priv->reg = (void __iomem *)dev_read_addr(dev);
+	if (IS_ERR(priv->reg))
+		return PTR_ERR(priv->reg);
+
+	return 0;
+}
+
+static const struct wdt_ops sp805_wdt_ops = {
+	.start = sp805_wdt_start,
+	.reset = sp805_wdt_reset,
+	.stop = sp805_wdt_stop,
+};
+
+static const struct udevice_id sp805_wdt_ids[] = {
+	{ .compatible = "arm,sp805-wdt" },
+	{}
+};
+
+U_BOOT_DRIVER(sp805_wdt) = {
+	.name = "sp805_wdt",
+	.id = UCLASS_WDT,
+	.of_match = sp805_wdt_ids,
+	.probe = sp805_wdt_probe,
+	.priv_auto_alloc_size = sizeof(struct sp805_wdt_priv),
+	.ofdata_to_platdata = sp805_wdt_ofdata_to_platdata,
+	.ops = &sp805_wdt_ops,
+};
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [U-Boot] [patch v2 2/3] dts: fsl-ls1028a: add sp805 node which is a watchdog
  2019-04-29  8:24 [U-Boot] [PATCH 0/3] add new wdt driver for sp805 Qiang Zhao
  2019-04-29  8:24 ` [U-Boot] [patch v2 1/3] watchdog: add sp805 watchdog support Qiang Zhao
@ 2019-04-29  8:24 ` Qiang Zhao
  2019-04-29  8:24 ` [U-Boot] [patch v2 3/3] defconfig: ls1028ardb: enable wdt Qiang Zhao
  2019-05-22 12:33 ` [U-Boot] [PATCH 0/3] add new wdt driver for sp805 Prabhakar Kushwaha
  3 siblings, 0 replies; 7+ messages in thread
From: Qiang Zhao @ 2019-04-29  8:24 UTC (permalink / raw)
  To: u-boot

add sp805 nodes in fsl-ls1028a.dtsi
---
 arch/arm/dts/fsl-ls1028a.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index 35382eb3b4..30fb20cd3e 100644
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -338,4 +338,8 @@
 		status = "disabled";
 	      };
 
+	cluster1_core0_watchdog: wdt at c000000 {
+		compatible = "arm,sp805-wdt";
+		reg = <0x0 0xc000000 0x0 0x1000>;
+	};
 };
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [U-Boot] [patch v2 3/3] defconfig: ls1028ardb: enable wdt
  2019-04-29  8:24 [U-Boot] [PATCH 0/3] add new wdt driver for sp805 Qiang Zhao
  2019-04-29  8:24 ` [U-Boot] [patch v2 1/3] watchdog: add sp805 watchdog support Qiang Zhao
  2019-04-29  8:24 ` [U-Boot] [patch v2 2/3] dts: fsl-ls1028a: add sp805 node which is a watchdog Qiang Zhao
@ 2019-04-29  8:24 ` Qiang Zhao
  2019-05-22 12:33 ` [U-Boot] [PATCH 0/3] add new wdt driver for sp805 Prabhakar Kushwaha
  3 siblings, 0 replies; 7+ messages in thread
From: Qiang Zhao @ 2019-04-29  8:24 UTC (permalink / raw)
  To: u-boot

Enable watchdog which is sp805, can be found on some NXP
Layerscape SoC.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
 configs/ls1028ardb_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/configs/ls1028ardb_defconfig b/configs/ls1028ardb_defconfig
index e3ff21f10c..5edcaae24b 100644
--- a/configs/ls1028ardb_defconfig
+++ b/configs/ls1028ardb_defconfig
@@ -70,3 +70,6 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCI_PNP=y
 CONFIG_DM_MMC=y
+CONFIG_WDT_SP805=y
+CONFIG_WDT=y
+CONFIG_CMD_WDT=y
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [U-Boot] [patch v2 1/3] watchdog: add sp805 watchdog support
  2019-04-29  8:24 ` [U-Boot] [patch v2 1/3] watchdog: add sp805 watchdog support Qiang Zhao
@ 2019-04-29  8:38   ` Stefan Roese
  0 siblings, 0 replies; 7+ messages in thread
From: Stefan Roese @ 2019-04-29  8:38 UTC (permalink / raw)
  To: u-boot

On 29.04.19 10:24, Qiang Zhao wrote:
> sp805 is watchdog on some NXP layerscape SoCs, Now add its driver in uboot.
> To add
> 	CONFIG_WDT_SP805=y
> 	CONFIG_WDT=y
> 	CONFIG_CMD_WDT=y
> in defconfig to use it.
> 
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
> ---
>   MAINTAINERS                  |   1 +
>   drivers/watchdog/Kconfig     |   7 ++
>   drivers/watchdog/Makefile    |   1 +
>   drivers/watchdog/sp805_wdt.c | 126 +++++++++++++++++++++++++++++++++++
>   4 files changed, 135 insertions(+)
>   create mode 100644 drivers/watchdog/sp805_wdt.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8f237128b2..e8e7a92802 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -410,6 +410,7 @@ FREESCALE QORIQ
>   M:	York Sun <york.sun@nxp.com>
>   S:	Maintained
>   T:	git git://git.denx.de/u-boot-fsl-qoriq.git
> +F:	drivers/watchdog/sp805_wdt.c
>   
>   I2C
>   M:	Heiko Schocher <hs@denx.de>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index b06c5447f6..29e04630d2 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -95,6 +95,13 @@ config WDT_ORION
>   	   Select this to enable Orion watchdog timer, which can be found on some
>   	   Marvell Armada chips.
>   
> +config WDT_SP805
> +	bool "SP805 watchdog timer support"
> +	depends on WDT
> +	help
> +	   Select this to enable SP805 watchdog timer, which can be found on some
> +	   nxp layerscape chips.
> +
>   config WDT_CDNS
>   	bool "Cadence watchdog timer support"
>   	depends on WDT
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 19c631bb58..eb285bde24 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -25,3 +25,4 @@ obj-$(CONFIG_BCM2835_WDT)       += bcm2835_wdt.o
>   obj-$(CONFIG_WDT_ORION) += orion_wdt.o
>   obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o
>   obj-$(CONFIG_MPC8xx_WATCHDOG) += mpc8xx_wdt.o
> +obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
> diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
> new file mode 100644
> index 0000000000..e4d81c995d
> --- /dev/null
> +++ b/drivers/watchdog/sp805_wdt.c
> @@ -0,0 +1,126 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Watchdog driver for SP805 on some Layerscape SoC
> + *
> + * Copyright 2019 NXP
> + */
> +
> +#include <asm/io.h>
> +#include <common.h>
> +#include <dm/device.h>
> +#include <dm/fdtaddr.h>
> +#include <dm/read.h>
> +#include <linux/bitops.h>
> +#include <watchdog.h>
> +#include <wdt.h>
> +
> +#define WDTLOAD			0x000
> +#define WDTCONTROL		0x008
> +#define WDTINTCLR		0x00C
> +#define WDTLOCK			0xC00
> +
> +#define TIME_OUT_DEFAULT_MSECS	15000
> +#define TIME_OUT_MIN_MSECS	1
> +#define TIME_OUT_MAX_MSECS	120000
> +#define SYS_FSL_WDT_CLK_DIV	16
> +#define INT_ENABLE		BIT(0)
> +#define RESET_ENABLE		BIT(1)
> +#define DISABLE			0
> +#define UNLOCK			0x1ACCE551
> +#define LOCK			0x00000001
> +#define INT_MASK		BIT(0)
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +struct sp805_wdt_priv {
> +	void __iomem *reg;
> +	u32 timeout;

You can drop this "timeout" variable here.

> +};
> +
> +static int sp805_wdt_reset(struct udevice *dev)
> +{
> +	struct sp805_wdt_priv *priv = dev_get_priv(dev);
> +
> +	writel(UNLOCK, priv->reg + WDTLOCK);
> +	writel(INT_MASK, priv->reg + WDTINTCLR);
> +	writel(LOCK, priv->reg + WDTLOCK);
> +	readl(priv->reg + WDTLOCK);
> +
> +	return 0;
> +}
> +
> +static int sp805_wdt_start(struct udevice *dev, u64 timeout, ulong flags)
> +{
> +	u32 load_value;
> +	struct sp805_wdt_priv *priv = dev_get_priv(dev);
> +
> +	priv->timeout = (u32)timeout;

Again, the copy of timeout in "priv" is not needed. Or am I missing
something?

> +	if (timeout < TIME_OUT_MIN_MSECS || timeout > TIME_OUT_MAX_MSECS)
> +		priv->timeout = TIME_OUT_DEFAULT_MSECS;

Why not better clip the value to the min or max value instead of
using a default value here?

Please note that you can specify a timeout value via the "timeout-sec"
DT property now with the new generic approach.

Thanks,
Stefan

> +	/* sp805 runs counter with given value twice, so when the timeout is
> +	 * set 15s, the gd->bus_clk is less than 9162MHz, the load_value will
> +	 * not overflow.
> +	 */
> +	load_value = (gd->bus_clk) /
> +		(2 * 1000 * SYS_FSL_WDT_CLK_DIV) * priv->timeout;
> +
> +	writel(UNLOCK, priv->reg + WDTLOCK);
> +	writel(load_value, priv->reg + WDTLOAD);
> +	writel(INT_MASK, priv->reg + WDTINTCLR);
> +	writel(INT_ENABLE | RESET_ENABLE, priv->reg + WDTCONTROL);
> +	writel(LOCK, priv->reg + WDTLOCK);
> +	readl(priv->reg + WDTLOCK);
> +
> +	return 0;
> +}
> +
> +static int sp805_wdt_stop(struct udevice *dev)
> +{
> +	struct sp805_wdt_priv *priv = dev_get_priv(dev);
> +
> +	writel(UNLOCK, priv->reg + WDTLOCK);
> +	writel(DISABLE, priv->reg + WDTCONTROL);
> +	writel(LOCK, priv->reg + WDTLOCK);
> +	readl(priv->reg + WDTLOCK);
> +
> +	return 0;
> +}
> +
> +static int sp805_wdt_probe(struct udevice *dev)
> +{
> +	debug("%s: Probing wdt%u\n", __func__, dev->seq);
> +
> +	return 0;
> +}
> +
> +static int sp805_wdt_ofdata_to_platdata(struct udevice *dev)
> +{
> +	struct sp805_wdt_priv *priv = dev_get_priv(dev);
> +
> +	priv->reg = (void __iomem *)dev_read_addr(dev);
> +	if (IS_ERR(priv->reg))
> +		return PTR_ERR(priv->reg);
> +
> +	return 0;
> +}
> +
> +static const struct wdt_ops sp805_wdt_ops = {
> +	.start = sp805_wdt_start,
> +	.reset = sp805_wdt_reset,
> +	.stop = sp805_wdt_stop,
> +};
> +
> +static const struct udevice_id sp805_wdt_ids[] = {
> +	{ .compatible = "arm,sp805-wdt" },
> +	{}
> +};
> +
> +U_BOOT_DRIVER(sp805_wdt) = {
> +	.name = "sp805_wdt",
> +	.id = UCLASS_WDT,
> +	.of_match = sp805_wdt_ids,
> +	.probe = sp805_wdt_probe,
> +	.priv_auto_alloc_size = sizeof(struct sp805_wdt_priv),
> +	.ofdata_to_platdata = sp805_wdt_ofdata_to_platdata,
> +	.ops = &sp805_wdt_ops,
> +};
> 

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [U-Boot] [PATCH 0/3] add new wdt driver for sp805
  2019-04-29  8:24 [U-Boot] [PATCH 0/3] add new wdt driver for sp805 Qiang Zhao
                   ` (2 preceding siblings ...)
  2019-04-29  8:24 ` [U-Boot] [patch v2 3/3] defconfig: ls1028ardb: enable wdt Qiang Zhao
@ 2019-05-22 12:33 ` Prabhakar Kushwaha
  3 siblings, 0 replies; 7+ messages in thread
From: Prabhakar Kushwaha @ 2019-05-22 12:33 UTC (permalink / raw)
  To: u-boot


> -----Original Message-----
> From: U-Boot <u-boot-bounces@lists.denx.de> On Behalf Of Qiang Zhao
> Sent: Monday, April 29, 2019 1:55 PM
> To: York Sun <york.sun@nxp.com>
> Cc: u-boot at lists.denx.de
> Subject: [U-Boot] [PATCH 0/3] add new wdt driver for sp805
> 
> changes for v2:
> 	- modify the driver to DM
> 
> Zhao Qiang (3):
>   watchdog: add sp805 watchdog support
>   dts: fsl-ls1028a: add sp805 node which is a watchdog
>   defconfig: ls1028ardb: enable wdt
> 

Patch series applied with updated subject and applied to fsl-qoriq master, awaiting upstream

--pk

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [U-Boot] [PATCH 0/3] add new wdt driver for sp805
@ 2019-05-07  3:16 Qiang Zhao
  0 siblings, 0 replies; 7+ messages in thread
From: Qiang Zhao @ 2019-05-07  3:16 UTC (permalink / raw)
  To: u-boot

changes for v2:
	- modify the driver to DM
changes for v3:
	- drop member "timeout" of struct "sp805_wat_priv", it is not
	  needed

Zhao Qiang (3):
  watchdog: add sp805 watchdog support
  dts: fsl-ls1028a: add sp805 node which is a watchdog
  defconfig: ls1028ardb: enable wdt

 MAINTAINERS                   |   1 +
 arch/arm/dts/fsl-ls1028a.dtsi |   4 ++
 configs/ls1028ardb_defconfig  |   3 +
 drivers/watchdog/Kconfig      |   7 ++
 drivers/watchdog/Makefile     |   1 +
 drivers/watchdog/sp805_wdt.c  | 126 ++++++++++++++++++++++++++++++++++
 6 files changed, 142 insertions(+)
 create mode 100644 drivers/watchdog/sp805_wdt.c

-- 
2.17.1

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2019-05-22 12:33 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-29  8:24 [U-Boot] [PATCH 0/3] add new wdt driver for sp805 Qiang Zhao
2019-04-29  8:24 ` [U-Boot] [patch v2 1/3] watchdog: add sp805 watchdog support Qiang Zhao
2019-04-29  8:38   ` Stefan Roese
2019-04-29  8:24 ` [U-Boot] [patch v2 2/3] dts: fsl-ls1028a: add sp805 node which is a watchdog Qiang Zhao
2019-04-29  8:24 ` [U-Boot] [patch v2 3/3] defconfig: ls1028ardb: enable wdt Qiang Zhao
2019-05-22 12:33 ` [U-Boot] [PATCH 0/3] add new wdt driver for sp805 Prabhakar Kushwaha
2019-05-07  3:16 Qiang Zhao

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.