From: Peng Fan <peng.fan@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 6/6] imx8qxp_mek: switch to use container image
Date: Tue, 7 May 2019 12:52:49 +0000 [thread overview]
Message-ID: <20190507130554.4598-7-peng.fan@nxp.com> (raw)
In-Reply-To: <20190507130554.4598-1-peng.fan@nxp.com>
Because FIT could not be used for AHAB secure boot on i.MX8,
so switch to use container image that could let SPL verify
ATF and U-Boot with AHAB.
Note: The AHAB related code has not been added.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
board/freescale/imx8qxp_mek/README | 4 +---
board/freescale/imx8qxp_mek/uboot-container.cfg | 13 +++++++++++++
configs/imx8qxp_mek_defconfig | 5 ++---
3 files changed, 16 insertions(+), 6 deletions(-)
create mode 100644 board/freescale/imx8qxp_mek/uboot-container.cfg
diff --git a/board/freescale/imx8qxp_mek/README b/board/freescale/imx8qxp_mek/README
index f32290e3a2..6dc151b166 100644
--- a/board/freescale/imx8qxp_mek/README
+++ b/board/freescale/imx8qxp_mek/README
@@ -39,11 +39,9 @@ $ cp imx-sc-firmware-0.7/mx8qx-mek-scfw-tcm.bin .
Build U-Boot
============
-$ export ATF_LOAD_ADDR=0x80000000
-$ export BL33_LOAD_ADDR=0x80020000
$ make imx8qxp_mek_defconfig
$ make flash.bin
-$ dd if=u-boot.itb of=flash.bin bs=512 seek=528
+$ dd if=u-boot.cnt of=flash.bin bs=512 seek=528
Flash the binary into the SD card
=================================
diff --git a/board/freescale/imx8qxp_mek/uboot-container.cfg b/board/freescale/imx8qxp_mek/uboot-container.cfg
new file mode 100644
index 0000000000..8165811818
--- /dev/null
+++ b/board/freescale/imx8qxp_mek/uboot-container.cfg
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#define __ASSEMBLY__
+
+/* This file is to create a container image could be loaded by SPL */
+BOOT_FROM SD 0x400
+SOC_TYPE IMX8QX
+CONTAINER
+IMAGE A35 bl31.bin 0x80000000
+IMAGE A35 u-boot.bin CONFIG_SYS_TEXT_BASE
diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig
index 6101f62087..8fafb3cf1a 100644
--- a/configs/imx8qxp_mek_defconfig
+++ b/configs/imx8qxp_mek_defconfig
@@ -5,15 +5,14 @@ CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qxp_mek/uboot-container.cfg"
CONFIG_TARGET_IMX8QXP_MEK=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=3
CONFIG_SPL=y
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx8qxp_mek/imximage.cfg"
CONFIG_BOOTDELAY=3
CONFIG_LOG=y
--
2.16.4
prev parent reply other threads:[~2019-05-07 12:52 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-07 12:52 [U-Boot] [PATCH 0/6] imx8: support container Peng Fan
2019-05-07 12:52 ` [U-Boot] [PATCH 1/6] imx: mach-imx: clean up Makefile Peng Fan
2019-05-07 12:52 ` [U-Boot] [PATCH 2/6] spl: Add function to get u-boot raw sector Peng Fan
2019-05-07 12:52 ` [U-Boot] [PATCH 3/6] imx8: support parsing i.MX8 Container file Peng Fan
2019-05-07 12:52 ` [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file Peng Fan
2019-05-18 16:09 ` Simon Glass
2019-05-20 1:30 ` Peng Fan
2019-05-20 1:45 ` Marek Vasut
2019-05-20 1:54 ` Peng Fan
2019-05-20 10:36 ` Marek Vasut
2019-05-21 2:31 ` Peng Fan
2019-05-21 2:49 ` Marek Vasut
2019-05-21 2:55 ` Peng Fan
2019-05-21 3:03 ` Marek Vasut
2019-05-21 3:19 ` Peng Fan
2019-05-21 8:32 ` Lukasz Majewski
2019-05-21 12:41 ` Marek Vasut
2019-05-21 13:13 ` Lukasz Majewski
2019-05-22 4:18 ` Peng Fan
2019-05-22 6:02 ` Lukasz Majewski
2019-05-22 6:15 ` Peng Fan
2019-05-22 6:46 ` Lukasz Majewski
2019-05-22 7:22 ` Peng Fan
2019-05-22 7:34 ` Lukasz Majewski
2019-05-22 11:41 ` Marek Vasut
2019-05-24 1:59 ` [U-Boot] [EXT] " Ye Li
2019-05-27 9:49 ` Peng Fan
2019-05-27 11:31 ` Marek Vasut
2019-05-30 7:06 ` Ye Li
2019-05-30 8:19 ` Marek Vasut
2019-06-04 3:27 ` Peng Fan
2019-06-04 11:24 ` Marek Vasut
2019-06-05 1:18 ` Peng Fan
2019-06-05 1:30 ` Marek Vasut
2019-06-05 1:59 ` Peng Fan
2019-06-05 2:38 ` Marek Vasut
2019-06-05 3:03 ` Peng Fan
2019-06-05 13:24 ` Marek Vasut
2019-06-05 13:52 ` Tom Rini
2019-06-05 13:55 ` Marek Vasut
2019-06-06 2:33 ` Peng Fan
2019-06-06 7:02 ` Lukasz Majewski
2019-06-06 7:23 ` Peng Fan
2019-06-06 7:12 ` Marek Vasut
2019-06-06 7:54 ` Peng Fan
2019-06-06 8:05 ` Marek Vasut
2019-05-22 2:56 ` [U-Boot] " Peng Fan
2019-05-07 12:52 ` [U-Boot] [PATCH 5/6] imx: add container target Peng Fan
2019-05-07 12:52 ` Peng Fan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190507130554.4598-7-peng.fan@nxp.com \
--to=peng.fan@nxp.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.