[PATCH v2 3/5] powerpc/powernv: Get rid of old scom_controller abstraction

[Andrew Donnellan <ajd@linux.ibm.com>]

Once upon a time, the SCOM access code was used by the WSP platform as well
as powernv. Thus it made sense to have a generic SCOM access interface to
abstract between different platforms.

Now that it's just powernv, with no other platforms currently on the
horizon, let's rip out scom_controller and make everything much simpler and
more direct.

While we're here, fix up the comment block at the top and add a SPDX
header.

Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
---
v1->v2:
- new patch
---
 arch/powerpc/platforms/powernv/Makefile     |   2 +-
 arch/powerpc/platforms/powernv/opal-xscom.c | 215 +++++++++++++-------
 arch/powerpc/platforms/powernv/scom.c       | 170 ----------------
 arch/powerpc/platforms/powernv/scom.h       | 133 ------------
 4 files changed, 143 insertions(+), 377 deletions(-)
 delete mode 100644 arch/powerpc/platforms/powernv/scom.c
 delete mode 100644 arch/powerpc/platforms/powernv/scom.h

diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 4b1644150135..69a3aefa905b 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -4,7 +4,6 @@ obj-y			+= idle.o opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
 obj-y			+= rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
 obj-y			+= opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o
 obj-y			+= opal-kmsg.o opal-powercap.o opal-psr.o opal-sensor-groups.o
-obj-y			+= opal-xscom.o scom.o
 
 obj-$(CONFIG_SMP)	+= smp.o subcore.o subcore-asm.o
 obj-$(CONFIG_PCI)	+= pci.o pci-ioda.o npu-dma.o pci-ioda-tce.o
@@ -16,3 +15,4 @@ obj-$(CONFIG_PERF_EVENTS) += opal-imc.o
 obj-$(CONFIG_PPC_MEMTRACE)	+= memtrace.o
 obj-$(CONFIG_PPC_VAS)	+= vas.o vas-window.o vas-debug.o
 obj-$(CONFIG_OCXL_BASE)	+= ocxl.o
+obj-$(CONFIG_SCOM_DEBUGFS) += opal-xscom.o
diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c
index 66337d92cb63..e16b0e346d7e 100644
--- a/arch/powerpc/platforms/powernv/opal-xscom.c
+++ b/arch/powerpc/platforms/powernv/opal-xscom.c
@@ -1,6 +1,10 @@
+// SPDX-License-Identifier:  GPL-2.0+
 /*
- * PowerNV LPC bus handling.
+ * PowerNV SCOM bus debugfs interface
  *
+ * Copyright 2010 Benjamin Herrenschmidt, IBM Corp
+ *                <benh@kernel.crashing.org>
+ *     and        David Gibson, IBM Corporation.
  * Copyright 2013 IBM Corp.
  *
  * This program is free software; you can redistribute it and/or
@@ -14,63 +18,13 @@
 #include <linux/bug.h>
 #include <linux/gfp.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
 
 #include <asm/machdep.h>
 #include <asm/firmware.h>
 #include <asm/opal.h>
-
-#include "scom.h"
-
-/*
- * We could probably fit that inside the scom_map_t
- * which is a void* after all but it's really too ugly
- * so let's kmalloc it for now
- */
-struct opal_scom_map {
-	uint32_t chip;
-	uint64_t addr;
-};
-
-static scom_map_t opal_scom_map(struct device_node *dev, u64 reg, u64 count)
-{
-	struct opal_scom_map *m;
-	const __be32 *gcid;
-
-	if (!of_get_property(dev, "scom-controller", NULL)) {
-		pr_err("%s: device %pOF is not a SCOM controller\n",
-			__func__, dev);
-		return SCOM_MAP_INVALID;
-	}
-	gcid = of_get_property(dev, "ibm,chip-id", NULL);
-	if (!gcid) {
-		pr_err("%s: device %pOF has no ibm,chip-id\n",
-			__func__, dev);
-		return SCOM_MAP_INVALID;
-	}
-	m = kmalloc(sizeof(*m), GFP_KERNEL);
-	if (!m)
-		return NULL;
-	m->chip = be32_to_cpup(gcid);
-	m->addr = reg;
-
-	return (scom_map_t)m;
-}
-
-static void opal_scom_unmap(scom_map_t map)
-{
-	kfree(map);
-}
-
-static int opal_xscom_err_xlate(int64_t rc)
-{
-	switch(rc) {
-	case 0:
-		return 0;
-	/* Add more translations if necessary */
-	default:
-		return -EIO;
-	}
-}
+#include <asm/debugfs.h>
+#include <asm/prom.h>
 
 static u64 opal_scom_unmangle(u64 addr)
 {
@@ -103,39 +57,154 @@ static u64 opal_scom_unmangle(u64 addr)
 	return addr;
 }
 
-static int opal_scom_read(scom_map_t map, u64 reg, u64 *value)
+static int opal_scom_read(uint32_t chip, uint64_t addr, u64 reg, u64 *value)
 {
-	struct opal_scom_map *m = map;
 	int64_t rc;
 	__be64 v;
 
-	reg = opal_scom_unmangle(m->addr + reg);
-	rc = opal_xscom_read(m->chip, reg, (__be64 *)__pa(&v));
+	reg = opal_scom_unmangle(addr + reg);
+	rc = opal_xscom_read(chip, reg, (__be64 *)__pa(&v));
+	if (rc) {
+		*value = 0xfffffffffffffffful;
+		return -EIO;
+	}
 	*value = be64_to_cpu(v);
-	return opal_xscom_err_xlate(rc);
+	return 0;
 }
 
-static int opal_scom_write(scom_map_t map, u64 reg, u64 value)
+static int opal_scom_write(uint32_t chip, uint64_t addr, u64 reg, u64 value)
 {
-	struct opal_scom_map *m = map;
 	int64_t rc;
 
-	reg = opal_scom_unmangle(m->addr + reg);
-	rc = opal_xscom_write(m->chip, reg, value);
-	return opal_xscom_err_xlate(rc);
+	reg = opal_scom_unmangle(addr + reg);
+	rc = opal_xscom_write(chip, reg, value);
+	if (rc)
+		return -EIO;
+	return 0;
+}
+
+struct scom_debug_entry {
+	u32 chip;
+	struct debugfs_blob_wrapper path;
+	char name[16];
+};
+
+static ssize_t scom_debug_read(struct file *filp, char __user *ubuf,
+			       size_t count, loff_t *ppos)
+{
+	struct scom_debug_entry *ent = filp->private_data;
+	u64 __user *ubuf64 = (u64 __user *)ubuf;
+	loff_t off = *ppos;
+	ssize_t done = 0; 
+	u64 reg, reg_base, reg_cnt, val;
+	int rc;
+
+	if (off < 0 || (off & 7) || (count & 7))
+		return -EINVAL;
+	reg_base = off >> 3;
+	reg_cnt = count >> 3;
+
+	for (reg = 0; reg < reg_cnt; reg++) {
+		rc = opal_scom_read(ent->chip, reg_base, reg, &val);
+		if (!rc)
+			rc = put_user(val, ubuf64);
+		if (rc) {
+			if (!done)
+				done = rc;
+			break;
+		}
+		ubuf64++;
+		*ppos += 8;
+		done += 8;
+	}
+	return done;
+}
+
+static ssize_t scom_debug_write(struct file* filp, const char __user *ubuf,
+				size_t count, loff_t *ppos)
+{
+	struct scom_debug_entry *ent = filp->private_data;
+	u64 __user *ubuf64 = (u64 __user *)ubuf;
+	loff_t off = *ppos;
+	ssize_t done = 0; 
+	u64 reg, reg_base, reg_cnt, val;
+	int rc;
+
+	if (off < 0 || (off & 7) || (count & 7))
+		return -EINVAL;
+	reg_base = off >> 3;
+	reg_cnt = count >> 3;
+
+	for (reg = 0; reg < reg_cnt; reg++) {
+		rc = get_user(val, ubuf64);
+		if (!rc)
+			rc = opal_scom_write(ent->chip, reg_base, reg,  val);
+		if (rc) {
+			if (!done)
+				done = rc;
+			break;
+		}
+		ubuf64++;
+		done += 8;
+	}
+	return done;
 }
 
-static const struct scom_controller opal_scom_controller = {
-	.map	= opal_scom_map,
-	.unmap	= opal_scom_unmap,
-	.read	= opal_scom_read,
-	.write	= opal_scom_write
+static const struct file_operations scom_debug_fops = {
+	.read =		scom_debug_read,
+	.write =	scom_debug_write,
+	.open =		simple_open,
+	.llseek =	default_llseek,
 };
 
-static int opal_xscom_init(void)
+static int scom_debug_init_one(struct dentry *root, struct device_node *dn,
+			       int chip)
 {
-	if (firmware_has_feature(FW_FEATURE_OPAL))
-		scom_init(&opal_scom_controller);
+	struct scom_debug_entry *ent;
+	struct dentry *dir;
+
+	ent = kzalloc(sizeof(*ent), GFP_KERNEL);
+	if (!ent)
+		return -ENOMEM;
+
+	ent->chip = chip;
+	snprintf(ent->name, 16, "%08x", chip);
+	ent->path.data = (void*)kasprintf(GFP_KERNEL, "%pOF", dn);
+	ent->path.size = strlen((char *)ent->path.data);
+
+	dir = debugfs_create_dir(ent->name, root);
+	if (!dir) {
+		kfree(ent->path.data);
+		kfree(ent);
+		return -1;
+	}
+
+	debugfs_create_blob("devspec", 0400, dir, &ent->path);
+	debugfs_create_file("access", 0600, dir, ent, &scom_debug_fops);
+
 	return 0;
 }
-machine_arch_initcall(powernv, opal_xscom_init);
+
+static int scom_debug_init(void)
+{
+	struct device_node *dn;
+	struct dentry *root;
+	int chip, rc;
+
+	if (!firmware_has_feature(FW_FEATURE_OPAL))
+		return 0;
+
+	root = debugfs_create_dir("scom", powerpc_debugfs_root);
+	if (!root)
+		return -1;
+
+	rc = 0;
+	for_each_node_with_property(dn, "scom-controller") {
+		chip = of_get_ibm_chip_id(dn);
+		WARN_ON(chip == -1);
+		rc |= scom_debug_init_one(root, dn, chip);
+	}
+
+	return rc;
+}
+device_initcall(scom_debug_init);
diff --git a/arch/powerpc/platforms/powernv/scom.c b/arch/powerpc/platforms/powernv/scom.c
deleted file mode 100644
index 288580e5fdfe..000000000000
--- a/arch/powerpc/platforms/powernv/scom.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright 2010 Benjamin Herrenschmidt, IBM Corp
- *                <benh@kernel.crashing.org>
- *     and        David Gibson, IBM Corporation.
- *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <asm/debugfs.h>
-#include <asm/prom.h>
-#include <linux/uaccess.h>
-
-#include "scom.h"
-
-const struct scom_controller *scom_controller;
-
-#ifdef CONFIG_SCOM_DEBUGFS
-struct scom_debug_entry {
-	struct device_node *dn;
-	struct debugfs_blob_wrapper path;
-	char name[16];
-};
-
-static ssize_t scom_debug_read(struct file *filp, char __user *ubuf,
-			       size_t count, loff_t *ppos)
-{
-	struct scom_debug_entry *ent = filp->private_data;
-	u64 __user *ubuf64 = (u64 __user *)ubuf;
-	loff_t off = *ppos;
-	ssize_t done = 0; 
-	u64 reg, reg_cnt, val;
-	scom_map_t map;
-	int rc;
-
-	if (off < 0 || (off & 7) || (count & 7))
-		return -EINVAL;
-	reg = off >> 3;
-	reg_cnt = count >> 3;
-
-	map = scom_map(ent->dn, reg, reg_cnt);
-	if (!scom_map_ok(map))
-		return -ENXIO;
-
-	for (reg = 0; reg < reg_cnt; reg++) {
-		rc = scom_read(map, reg, &val);
-		if (!rc)
-			rc = put_user(val, ubuf64);
-		if (rc) {
-			if (!done)
-				done = rc;
-			break;
-		}
-		ubuf64++;
-		*ppos += 8;
-		done += 8;
-	}
-	scom_unmap(map);
-	return done;
-}
-
-static ssize_t scom_debug_write(struct file* filp, const char __user *ubuf,
-				size_t count, loff_t *ppos)
-{
-	struct scom_debug_entry *ent = filp->private_data;
-	u64 __user *ubuf64 = (u64 __user *)ubuf;
-	loff_t off = *ppos;
-	ssize_t done = 0; 
-	u64 reg, reg_cnt, val;
-	scom_map_t map;
-	int rc;
-
-	if (off < 0 || (off & 7) || (count & 7))
-		return -EINVAL;
-	reg = off >> 3;
-	reg_cnt = count >> 3;
-
-	map = scom_map(ent->dn, reg, reg_cnt);
-	if (!scom_map_ok(map))
-		return -ENXIO;
-
-	for (reg = 0; reg < reg_cnt; reg++) {
-		rc = get_user(val, ubuf64);
-		if (!rc)
-			rc = scom_write(map, reg,  val);
-		if (rc) {
-			if (!done)
-				done = rc;
-			break;
-		}
-		ubuf64++;
-		done += 8;
-	}
-	scom_unmap(map);
-	return done;
-}
-
-static const struct file_operations scom_debug_fops = {
-	.read =		scom_debug_read,
-	.write =	scom_debug_write,
-	.open =		simple_open,
-	.llseek =	default_llseek,
-};
-
-static int scom_debug_init_one(struct dentry *root, struct device_node *dn,
-			       int i)
-{
-	struct scom_debug_entry *ent;
-	struct dentry *dir;
-
-	ent = kzalloc(sizeof(*ent), GFP_KERNEL);
-	if (!ent)
-		return -ENOMEM;
-
-	ent->dn = of_node_get(dn);
-	snprintf(ent->name, 16, "%08x", i);
-	ent->path.data = (void*)kasprintf(GFP_KERNEL, "%pOF", dn);
-	ent->path.size = strlen((char *)ent->path.data);
-
-	dir = debugfs_create_dir(ent->name, root);
-	if (!dir) {
-		of_node_put(dn);
-		kfree(ent->path.data);
-		kfree(ent);
-		return -1;
-	}
-
-	debugfs_create_blob("devspec", 0400, dir, &ent->path);
-	debugfs_create_file("access", 0600, dir, ent, &scom_debug_fops);
-
-	return 0;
-}
-
-static int scom_debug_init(void)
-{
-	struct device_node *dn;
-	struct dentry *root;
-	int i, rc;
-
-	root = debugfs_create_dir("scom", powerpc_debugfs_root);
-	if (!root)
-		return -1;
-
-	i = rc = 0;
-	for_each_node_with_property(dn, "scom-controller") {
-		int id = of_get_ibm_chip_id(dn);
-		if (id == -1)
-			id = i;
-		rc |= scom_debug_init_one(root, dn, id);
-		i++;
-	}
-
-	return rc;
-}
-device_initcall(scom_debug_init);
-#endif /* CONFIG_SCOM_DEBUGFS */
diff --git a/arch/powerpc/platforms/powernv/scom.h b/arch/powerpc/platforms/powernv/scom.h
deleted file mode 100644
index 2c72f7fc8726..000000000000
--- a/arch/powerpc/platforms/powernv/scom.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Copyright 2010 Benjamin Herrenschmidt, IBM Corp
- *                <benh@kernel.crashing.org>
- *     and        David Gibson, IBM Corporation.
- *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _SCOM_H
-#define _SCOM_H
-
-/*
- * The SCOM bus is a sideband bus used for accessing various internal
- * registers of the processor or the chipset. The implementation details
- * differ between processors and platforms, and the access method as
- * well.
- *
- * This API allows to "map" ranges of SCOM register numbers associated
- * with a given SCOM controller. The later must be represented by a
- * device node, though some implementations might support NULL if there
- * is no possible ambiguity
- *
- * Then, scom_read/scom_write can be used to accesses registers inside
- * that range. The argument passed is a register number relative to
- * the beginning of the range mapped.
- */
-
-typedef void *scom_map_t;
-
-/* Value for an invalid SCOM map */
-#define SCOM_MAP_INVALID	(NULL)
-
-/* The scom_controller data structure is what the platform passes
- * to the core code in scom_init, it provides the actual implementation
- * of all the SCOM functions
- */
-struct scom_controller {
-	scom_map_t (*map)(struct device_node *ctrl_dev, u64 reg, u64 count);
-	void (*unmap)(scom_map_t map);
-
-	int (*read)(scom_map_t map, u64 reg, u64 *value);
-	int (*write)(scom_map_t map, u64 reg, u64 value);
-};
-
-extern const struct scom_controller *scom_controller;
-
-/**
- * scom_init - Initialize the SCOM backend, called by the platform
- * @controller: The platform SCOM controller
- */
-static inline void scom_init(const struct scom_controller *controller)
-{
-	scom_controller = controller;
-}
-
-/**
- * scom_map_ok - Test is a SCOM mapping is successful
- * @map: The result of scom_map to test
- */
-static inline int scom_map_ok(scom_map_t map)
-{
-	return map != SCOM_MAP_INVALID;
-}
-
-/**
- * scom_map - Map a block of SCOM registers
- * @ctrl_dev: Device node of the SCOM controller
- *            some implementations allow NULL here
- * @reg: first SCOM register to map
- * @count: Number of SCOM registers to map
- */
-
-static inline scom_map_t scom_map(struct device_node *ctrl_dev,
-				  u64 reg, u64 count)
-{
-	return scom_controller->map(ctrl_dev, reg, count);
-}
-
-/**
- * scom_unmap - Unmap a block of SCOM registers
- * @map: Result of scom_map is to be unmapped
- */
-static inline void scom_unmap(scom_map_t map)
-{
-	if (scom_map_ok(map))
-		scom_controller->unmap(map);
-}
-
-/**
- * scom_read - Read a SCOM register
- * @map: Result of scom_map
- * @reg: Register index within that map
- * @value: Updated with the value read
- *
- * Returns 0 (success) or a negative error code
- */
-static inline int scom_read(scom_map_t map, u64 reg, u64 *value)
-{
-	int rc;
-
-	rc = scom_controller->read(map, reg, value);
-	if (rc)
-		*value = 0xfffffffffffffffful;
-	return rc;
-}
-
-/**
- * scom_write - Write to a SCOM register
- * @map: Result of scom_map
- * @reg: Register index within that map
- * @value: Value to write
- *
- * Returns 0 (success) or a negative error code
- */
-static inline int scom_write(scom_map_t map, u64 reg, u64 value)
-{
-	return scom_controller->write(map, reg, value);
-}
-
-
-#endif /* _SCOM_H */
-- 
2.20.1