Re: [RFC 5/9] drm: rcar-du: Add CMM support for M3-W

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Jacopo,

Thank you for the patch.

On Wed, May 08, 2019 at 07:34:24PM +0200, Jacopo Mondi wrote:
> R-Car M3-W provides a CMM for each of it's DU output channel. Add CMM as
> a supported feature for the SoC.
> 
> Temporary commit to be later expanded to all Gen3 SoCs V3H/M apart.

Could you please do so in a single commit ? It should be pretty
straightforward. Apart from that this looks good to me,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> index 75ab17af13a9..984553342b1f 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -280,7 +280,8 @@ static const struct rcar_du_device_info rcar_du_r8a7796_info = {
>  	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
>  		  | RCAR_DU_FEATURE_VSP1_SOURCE
>  		  | RCAR_DU_FEATURE_INTERLACED
> -		  | RCAR_DU_FEATURE_TVM_SYNC,
> +		  | RCAR_DU_FEATURE_TVM_SYNC
> +		  | RCAR_DU_FEATURE_CMM,
>  	.channels_mask = BIT(2) | BIT(1) | BIT(0),
>  	.routes = {
>  		/*

-- 
Regards,

Laurent Pinchart