From: Xiaowei Bao <xiaowei.bao@nxp.com> To: bhelgaas@google.com, robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, leoyang.li@nxp.com, kishon@ti.com, lorenzo.pieralisi@arm.com, arnd@arndb.de, gregkh@linuxfoundation.org, minghuan.Lian@nxp.com, mingkai.hu@nxp.com, roy.zang@nxp.com, kstewart@linuxfoundation.org, pombredanne@nexb.com, shawn.lin@rock-chips.com, linux-pci@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linuxppc-dev@lists.ozlabs.org Cc: Xiaowei Bao <xiaowei.bao@nxp.com> Subject: [PATCH 3/3] PCI: layerscape: Add LS1028a support Date: Wed, 15 May 2019 15:27:47 +0800 [thread overview] Message-ID: <20190515072747.39941-3-xiaowei.bao@nxp.com> (raw) In-Reply-To: <20190515072747.39941-1-xiaowei.bao@nxp.com> Add support for the LS1028a PCIe controller. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> --- drivers/pci/controller/dwc/pci-layerscape.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c index 3a5fa26..8c556e1 100644 --- a/drivers/pci/controller/dwc/pci-layerscape.c +++ b/drivers/pci/controller/dwc/pci-layerscape.c @@ -236,6 +236,14 @@ static int ls_pcie_msi_host_init(struct pcie_port *pp) .dw_pcie_ops = &dw_ls_pcie_ops, }; +static const struct ls_pcie_drvdata ls1028a_drvdata = { + .lut_offset = 0x80000, + .ltssm_shift = 0, + .lut_dbg = 0x407fc, + .ops = &ls_pcie_host_ops, + .dw_pcie_ops = &dw_ls_pcie_ops, +}; + static const struct ls_pcie_drvdata ls1046_drvdata = { .lut_offset = 0x80000, .ltssm_shift = 24, @@ -263,6 +271,7 @@ static int ls_pcie_msi_host_init(struct pcie_port *pp) static const struct of_device_id ls_pcie_of_match[] = { { .compatible = "fsl,ls1012a-pcie", .data = &ls1046_drvdata }, { .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata }, + { .compatible = "fsl,ls1028a-pcie", .data = &ls1028a_drvdata }, { .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata }, { .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata }, { .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata }, -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: Xiaowei Bao <xiaowei.bao@nxp.com> To: bhelgaas@google.com, robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, leoyang.li@nxp.com, kishon@ti.com, lorenzo.pieralisi@arm.com, arnd@arndb.de, gregkh@linuxfoundation.org, minghuan.Lian@nxp.com, mingkai.hu@nxp.com, roy.zang@nxp.com, kstewart@linuxfoundation.org, pombredanne@nexb.com, shawn.lin@rock-chips.com, linux-pci@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linuxppc-dev@lists.ozlabs.org Cc: Xiaowei Bao <xiaowei.bao@nxp.com> Subject: [PATCH 3/3] PCI: layerscape: Add LS1028a support Date: Wed, 15 May 2019 15:27:47 +0800 [thread overview] Message-ID: <20190515072747.39941-3-xiaowei.bao@nxp.com> (raw) In-Reply-To: <20190515072747.39941-1-xiaowei.bao@nxp.com> Add support for the LS1028a PCIe controller. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> --- drivers/pci/controller/dwc/pci-layerscape.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c index 3a5fa26..8c556e1 100644 --- a/drivers/pci/controller/dwc/pci-layerscape.c +++ b/drivers/pci/controller/dwc/pci-layerscape.c @@ -236,6 +236,14 @@ static int ls_pcie_msi_host_init(struct pcie_port *pp) .dw_pcie_ops = &dw_ls_pcie_ops, }; +static const struct ls_pcie_drvdata ls1028a_drvdata = { + .lut_offset = 0x80000, + .ltssm_shift = 0, + .lut_dbg = 0x407fc, + .ops = &ls_pcie_host_ops, + .dw_pcie_ops = &dw_ls_pcie_ops, +}; + static const struct ls_pcie_drvdata ls1046_drvdata = { .lut_offset = 0x80000, .ltssm_shift = 24, @@ -263,6 +271,7 @@ static int ls_pcie_msi_host_init(struct pcie_port *pp) static const struct of_device_id ls_pcie_of_match[] = { { .compatible = "fsl,ls1012a-pcie", .data = &ls1046_drvdata }, { .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata }, + { .compatible = "fsl,ls1028a-pcie", .data = &ls1028a_drvdata }, { .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata }, { .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata }, { .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata }, -- 1.7.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-05-15 7:36 UTC|newest] Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-15 7:27 [PATCH 1/3] dt-bindings: pci: layerscape-pci: add compatible strings "fsl,ls1028a-pcie" Xiaowei Bao 2019-05-15 7:27 ` [PATCH 1/3] dt-bindings: pci: layerscape-pci: add compatible strings "fsl, ls1028a-pcie" Xiaowei Bao 2019-05-15 7:27 ` Xiaowei Bao 2019-05-15 7:27 ` [PATCH 2/3] arm64: dts: ls1028a: Add PCIe controller DT nodes Xiaowei Bao 2019-05-15 7:27 ` Xiaowei Bao 2019-05-15 8:05 ` Arnd Bergmann 2019-05-15 8:05 ` Arnd Bergmann 2019-05-15 8:05 ` Arnd Bergmann 2019-05-17 3:21 ` [EXT] " Xiaowei Bao 2019-05-17 3:21 ` Xiaowei Bao 2019-05-17 3:21 ` Xiaowei Bao 2019-05-17 8:58 ` Arnd Bergmann 2019-05-17 8:58 ` Arnd Bergmann 2019-05-17 8:58 ` Arnd Bergmann 2019-05-17 10:44 ` Ard Biesheuvel 2019-05-17 10:44 ` Ard Biesheuvel 2019-05-17 10:44 ` Ard Biesheuvel 2019-05-17 10:44 ` Ard Biesheuvel 2019-05-20 8:12 ` Xiaowei Bao 2019-05-20 8:12 ` Xiaowei Bao 2019-05-20 8:12 ` Xiaowei Bao 2019-05-15 7:27 ` Xiaowei Bao [this message] 2019-05-15 7:27 ` [PATCH 3/3] PCI: layerscape: Add LS1028a support Xiaowei Bao 2019-06-13 20:59 ` [PATCH 1/3] dt-bindings: pci: layerscape-pci: add compatible strings "fsl,ls1028a-pcie" Rob Herring 2019-06-13 20:59 ` Rob Herring 2019-06-13 20:59 ` Rob Herring 2019-06-13 20:59 ` Rob Herring 2019-06-14 1:21 ` [EXT] " Xiaowei Bao 2019-06-14 1:21 ` Xiaowei Bao 2019-06-14 1:21 ` Xiaowei Bao 2019-06-14 1:21 ` Xiaowei Bao
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190515072747.39941-3-xiaowei.bao@nxp.com \ --to=xiaowei.bao@nxp.com \ --cc=arnd@arndb.de \ --cc=bhelgaas@google.com \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=kishon@ti.com \ --cc=kstewart@linuxfoundation.org \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=lorenzo.pieralisi@arm.com \ --cc=mark.rutland@arm.com \ --cc=minghuan.Lian@nxp.com \ --cc=mingkai.hu@nxp.com \ --cc=pombredanne@nexb.com \ --cc=robh+dt@kernel.org \ --cc=roy.zang@nxp.com \ --cc=shawn.lin@rock-chips.com \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.