From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus Klotzbuecher Date: Wed, 15 May 2019 15:15:57 +0200 Subject: [U-Boot] [PATCH v2 6/9] ubispl: migrate configuration to Kconfig In-Reply-To: <20190515131600.28798-1-mk@mkio.de> References: <20190515131600.28798-1-mk@mkio.de> Message-ID: <20190515131600.28798-7-mk@mkio.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: u-boot@lists.denx.de From: Markus Klotzbuecher Move the ubispl configuration to KConfig and drop them from the whitelist. Signed-off-by: Markus Klotzbuecher Cc: Heiko Schocher Cc: Kyungmin Park Cc: Javier Mart=C3=ADnez Canillas Cc: Enric Balletbo i Serra --- Changes for v2: None common/spl/Kconfig | 79 ++++++++++++++++++++++++++++++++++++ scripts/config_whitelist.txt | 12 ------ 2 files changed, 79 insertions(+), 12 deletions(-) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index c7cd34449a..fa63746909 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -556,6 +556,85 @@ config SPL_NAND_SUPPORT This enables the drivers in drivers/mtd/nand/raw as part of an SPL build. =20 +config SPL_UBI + bool "Support UBI" + help + Enable support for loading payloads from UBI. See + README.ubispl for more info. + +if SPL_UBI +config SPL_UBI_MAX_VOL_LEBS + int "Maximum number of LEBs per volume" + depends on SPL_UBI + help + The maximum number of logical eraseblocks which a static volume + to load can contain. Used for sizing the scan data structure. + +config SPL_UBI_MAX_PEB_SIZE + int "Maximum PEB size" + depends on SPL_UBI + help + The maximum physical erase block size. + +config SPL_UBI_MAX_PEBS + int "Maximum number of PEBs" + depends on SPL_UBI + help + The maximum physical erase block size. If not overridden by + board code, this value will be used as the actual number of PEBs. + +config SPL_UBI_PEB_OFFSET + int "Offset to first UBI PEB" + depends on SPL_UBI + help + The offset in number of PEBs from the start of flash to the first + PEB part of the UBI image. + +config SPL_UBI_VID_OFFSET + int "Offset to VID header" + depends on SPL_UBI + +config SPL_UBI_LEB_START + int "Offset to LEB in PEB" + depends on SPL_UBI + help + The offset in bytes to the LEB within a PEB. + +config SPL_UBI_INFO_ADDR + hex "Address to place UBI scan info" + depends on SPL_UBI + help + Address for ubispl to place the scan info. Read README.ubispl to + determine the required size + +config SPL_UBI_VOL_IDS + int "Maximum volume id" + depends on SPL_UBI + help + The maximum volume id which can be loaded. Used for sizing the + scan data structure. + +config SPL_UBI_LOAD_MONITOR_ID + int "id of U-Boot volume" + depends on SPL_UBI + help + The UBI volume id from which to load U-Boot + +config SPL_UBI_LOAD_KERNEL_ID + int "id of kernel volume" + depends on SPL_OS_BOOT && SPL_UBI + help + The UBI volume id from which to load the kernel + +config SPL_UBI_LOAD_ARGS_ID + int "id of kernel args volume" + depends on SPL_OS_BOOT && SPL_UBI + help + The UBI volume id from which to load the device tree + + +endif # if SPL_UBI + config SPL_NET_SUPPORT bool "Support networking" help diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index af7eb73e4a..eeddc6a974 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1871,18 +1871,6 @@ CONFIG_SPL_STACK_ADDR CONFIG_SPL_STACK_SIZE CONFIG_SPL_START_S_PATH CONFIG_SPL_TARGET -CONFIG_SPL_UBI -CONFIG_SPL_UBI_INFO_ADDR -CONFIG_SPL_UBI_LEB_START -CONFIG_SPL_UBI_LOAD_ARGS_ID -CONFIG_SPL_UBI_LOAD_KERNEL_ID -CONFIG_SPL_UBI_LOAD_MONITOR_ID -CONFIG_SPL_UBI_MAX_PEBS -CONFIG_SPL_UBI_MAX_PEB_SIZE -CONFIG_SPL_UBI_MAX_VOL_LEBS -CONFIG_SPL_UBI_PEB_OFFSET -CONFIG_SPL_UBI_VID_OFFSET -CONFIG_SPL_UBI_VOL_IDS CONFIG_SPL_UBOOT_KEY_HASH CONFIG_SRAM_BASE CONFIG_SRAM_SIZE --=20 2.20.1