From: Markus Klotzbuecher <mk@mkio.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 7/9] configs: migrate ubispl boards to KConfig
Date: Wed, 15 May 2019 15:15:58 +0200 [thread overview]
Message-ID: <20190515131600.28798-8-mk@mkio.de> (raw)
In-Reply-To: <20190515131600.28798-1-mk@mkio.de>
From: Markus Klotzbuecher <markus.klotzbuecher@kistler.com>
Migrate the ubispl configuration for the omap3_igep00x0 and
am335x_igep003x boards to KConfig. Both boards were built with
SOURCE_DATE_EPOCH=0 and found to be equal before and after.
Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Javier MartÃnez Canillas <javier@dowhile0.org>
Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
---
Changes for v2: new patch
configs/am335x_igep003x_defconfig | 12 ++++++++++++
configs/igep00x0_defconfig | 12 ++++++++++++
include/configs/am335x_igep003x.h | 16 ----------------
include/configs/omap3_igep00x0.h | 14 --------------
4 files changed, 24 insertions(+), 30 deletions(-)
diff --git a/configs/am335x_igep003x_defconfig b/configs/am335x_igep003x_defconfig
index f44fb09b31..5874831ba1 100644
--- a/configs/am335x_igep003x_defconfig
+++ b/configs/am335x_igep003x_defconfig
@@ -21,6 +21,18 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_UBI=y
+CONFIG_SPL_UBI_MAX_VOL_LEBS=256
+CONFIG_SPL_UBI_MAX_PEB_SIZE=262144
+CONFIG_SPL_UBI_MAX_PEBS=4096
+CONFIG_SPL_UBI_PEB_OFFSET=4
+CONFIG_SPL_UBI_VID_OFFSET=512
+CONFIG_SPL_UBI_LEB_START=2048
+CONFIG_SPL_UBI_INFO_ADDR=0x88080000
+CONFIG_SPL_UBI_VOL_IDS=8
+CONFIG_SPL_UBI_LOAD_MONITOR_ID=0
+CONFIG_SPL_UBI_LOAD_KERNEL_ID=3
+CONFIG_SPL_UBI_LOAD_ARGS_ID=4
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
index 927d7f0ecd..ab11935f48 100644
--- a/configs/igep00x0_defconfig
+++ b/configs/igep00x0_defconfig
@@ -17,6 +17,18 @@ CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_UBI=y
+CONFIG_SPL_UBI_MAX_VOL_LEBS=256
+CONFIG_SPL_UBI_MAX_PEB_SIZE=262144
+CONFIG_SPL_UBI_MAX_PEBS=4096
+CONFIG_SPL_UBI_PEB_OFFSET=4
+CONFIG_SPL_UBI_VID_OFFSET=512
+CONFIG_SPL_UBI_LEB_START=2048
+CONFIG_SPL_UBI_INFO_ADDR=0x88080000
+CONFIG_SPL_UBI_VOL_IDS=8
+CONFIG_SPL_UBI_LOAD_MONITOR_ID=0
+CONFIG_SPL_UBI_LOAD_KERNEL_ID=3
+CONFIG_SPL_UBI_LOAD_ARGS_ID=4
CONFIG_SPL_ONENAND_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_CMD_SPL=y
diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h
index 5131cd38e4..5b5e16026e 100644
--- a/include/configs/am335x_igep003x.h
+++ b/include/configs/am335x_igep003x.h
@@ -106,22 +106,6 @@
/* NAND support */
#define CONFIG_SYS_NAND_ONFI_DETECTION 1
-/* SPL */
-
-/* UBI configuration */
-#define CONFIG_SPL_UBI 1
-#define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
-#define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
-#define CONFIG_SPL_UBI_MAX_PEBS 4096
-#define CONFIG_SPL_UBI_VOL_IDS 8
-#define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
-#define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3
-#define CONFIG_SPL_UBI_LOAD_ARGS_ID 4
-#define CONFIG_SPL_UBI_PEB_OFFSET 4
-#define CONFIG_SPL_UBI_VID_OFFSET 512
-#define CONFIG_SPL_UBI_LEB_START 2048
-#define CONFIG_SPL_UBI_INFO_ADDR 0x88080000
-
/* NAND config */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index a95a9cc664..4ad7dc18b1 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -96,18 +96,4 @@
#define CONFIG_SYS_NAND_ECCBYTES 14
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-/* UBI configuration */
-#define CONFIG_SPL_UBI 1
-#define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
-#define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
-#define CONFIG_SPL_UBI_MAX_PEBS 4096
-#define CONFIG_SPL_UBI_VOL_IDS 8
-#define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
-#define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3
-#define CONFIG_SPL_UBI_LOAD_ARGS_ID 4
-#define CONFIG_SPL_UBI_PEB_OFFSET 4
-#define CONFIG_SPL_UBI_VID_OFFSET 512
-#define CONFIG_SPL_UBI_LEB_START 2048
-#define CONFIG_SPL_UBI_INFO_ADDR 0x88080000
-
#endif /* __IGEP00X0_H */
--
2.20.1
next prev parent reply other threads:[~2019-05-15 13:15 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-15 13:15 [U-Boot] [PATCH v2 0/9] miscellaneous ubispl and ubi improvements Markus Klotzbuecher
2019-05-15 13:15 ` [U-Boot] [PATCH v2 1/9] moveconfig: expand simple expressions Markus Klotzbuecher
2019-06-13 3:30 ` Heiko Schocher
2020-01-25 21:46 ` Heinrich Schuchardt
2020-01-29 8:44 ` Markus Klotzbuecher
2020-01-29 11:54 ` Heinrich Schuchardt
2019-05-15 13:15 ` [U-Boot] [PATCH v2 2/9] env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND Markus Klotzbuecher
2019-06-13 3:31 ` Heiko Schocher
2019-05-15 13:15 ` [U-Boot] [PATCH v2 3/9] at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs Markus Klotzbuecher
2019-06-13 3:31 ` Heiko Schocher
2019-05-15 13:15 ` [U-Boot] [PATCH v2 4/9] env: ubi: support configurable VID offset Markus Klotzbuecher
2019-06-13 3:31 ` Heiko Schocher
2019-05-15 13:15 ` [U-Boot] [PATCH v2 5/9] ubi: fix UBI_SILENCE_MSG Markus Klotzbuecher
2019-06-13 3:32 ` Heiko Schocher
2019-05-15 13:15 ` [U-Boot] [PATCH v2 6/9] ubispl: migrate configuration to Kconfig Markus Klotzbuecher
2019-06-13 3:32 ` Heiko Schocher
2019-05-15 13:15 ` Markus Klotzbuecher [this message]
2019-05-20 20:50 ` [U-Boot] [PATCH v2 7/9] configs: migrate ubispl boards to KConfig Enric Balletbo Serra
2019-06-13 3:32 ` Heiko Schocher
2019-05-15 13:15 ` [U-Boot] [PATCH v2 8/9] ubispl: add support for loading volumes by name Markus Klotzbuecher
2019-06-13 3:33 ` Heiko Schocher
2019-05-15 13:16 ` [U-Boot] [PATCH v2 9/9] ubispl: introduce separate CONFIG_UBI_SPL_SILENCE_MSG Markus Klotzbuecher
2019-06-13 3:33 ` Heiko Schocher
2019-06-05 10:39 ` [U-Boot] [PATCH v2 0/9] miscellaneous ubispl and ubi improvements Markus Klotzbuecher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190515131600.28798-8-mk@mkio.de \
--to=mk@mkio.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.