All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Marek Vasut <marex@denx.de>, Fabio Estevam <festevam@gmail.com>,
	Shawn Guo <shawnguo@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>
Subject: [PATCH V2 2/8] ARM: dts: imx53: Update USB configuration on M53Menlo
Date: Thu, 16 May 2019 00:45:55 +0200	[thread overview]
Message-ID: <20190515224601.4527-2-marex@denx.de> (raw)
In-Reply-To: <20190515224601.4527-1-marex@denx.de>

Turn USBH1 into Host and update the GPIO polarity of the
regulator to match new hardware.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
---
V2: Add enable-active-high property to the regulator node
---
 arch/arm/boot/dts/imx53-m53menlo.dts | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index 62bc6a95a477..7dddd7028bec 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -50,7 +50,8 @@
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 };
 
@@ -268,8 +269,10 @@
 
 		pinctrl_usb: usbgrp {
 			fsl,pins = <
-				MX53_PAD_GPIO_2__GPIO1_2		0x1d5
-				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1d5
+				MX53_PAD_GPIO_2__GPIO1_2		0x1c4
+				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1c4
+				MX53_PAD_GPIO_4__GPIO1_4		0x1c4
+				MX53_PAD_GPIO_18__GPIO7_13		0x1c4
 			>;
 		};
 	};
@@ -322,7 +325,7 @@
 	pinctrl-0 = <&pinctrl_usb>;
 	vbus-supply = <&reg_usbh1_vbus>;
 	phy_type = "utmi";
-	dr_mode = "peripheral";
+	dr_mode = "host";
 	status = "okay";
 };
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-05-15 22:46 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-15 22:45 [PATCH V2 1/8] ARM: dts: imx53: Update UART configuration on M53Menlo Marek Vasut
2019-05-15 22:45 ` Marek Vasut [this message]
2019-05-15 22:45 ` [PATCH V2 3/8] ARM: dts: imx53: Add ethernet PHY reset " Marek Vasut
2019-05-15 22:45 ` [PATCH V2 4/8] ARM: dts: imx53: Select netdev trigger for Yellow LED " Marek Vasut
2019-05-15 22:45 ` [PATCH V2 5/8] ARM: dts: imx53: Add power GPIOs " Marek Vasut
2019-05-15 22:45 ` [PATCH V2 6/8] ARM: dts: imx53: Add GPIO beeper " Marek Vasut
2019-05-15 22:46 ` [PATCH V2 7/8] ARM: dts: imx53: Add GPIO line names " Marek Vasut
2019-05-15 22:46 ` [PATCH V2 8/8] ARM: dts: imx53: Update pinmux settings " Marek Vasut
2019-05-16 11:36 ` [PATCH V2 1/8] ARM: dts: imx53: Update UART configuration " Fabio Estevam
2019-05-17  2:18 ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190515224601.4527-2-marex@denx.de \
    --to=marex@denx.de \
    --cc=festevam@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.