All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: linux-i2c@vger.kernel.org
Cc: Wolfram Sang <wsa@the-dreams.de>,
	linux-kernel@vger.kernel.org,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH v2 1/2] eeprom: at24: use devm_i2c_new_dummy_device()
Date: Mon, 20 May 2019 09:10:41 +0200	[thread overview]
Message-ID: <20190520071042.21072-2-brgl@bgdev.pl> (raw)
In-Reply-To: <20190520071042.21072-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Now that it's upstream, use the resource managed version
of i2c_new_dummy_device().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/misc/eeprom/at24.c | 38 +++++++++-----------------------------
 1 file changed, 9 insertions(+), 29 deletions(-)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 63aa541c9608..bdeec0777029 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -507,14 +507,6 @@ static const struct at24_chip_data *at24_get_chip_data(struct device *dev)
 	return cdata;
 }
 
-static void at24_remove_dummy_clients(struct at24_data *at24)
-{
-	int i;
-
-	for (i = 1; i < at24->num_addresses; i++)
-		i2c_unregister_device(at24->client[i].client);
-}
-
 static int at24_make_dummy_client(struct at24_data *at24, unsigned int index,
 				  struct regmap_config *regmap_config)
 {
@@ -527,18 +519,14 @@ static int at24_make_dummy_client(struct at24_data *at24, unsigned int index,
 	dev = &base_client->dev;
 	addr = base_client->addr + index;
 
-	dummy_client = i2c_new_dummy(base_client->adapter,
-				     base_client->addr + index);
-	if (!dummy_client) {
-		dev_err(dev, "address 0x%02x unavailable\n", addr);
-		return -EADDRINUSE;
-	}
+	dummy_client = devm_i2c_new_dummy_device(dev, base_client->adapter,
+						 base_client->addr + index);
+	if (IS_ERR(dummy_client))
+		return PTR_ERR(dummy_client);
 
 	regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
-	if (IS_ERR(regmap)) {
-		i2c_unregister_device(dummy_client);
+	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
-	}
 
 	at24->client[index].client = dummy_client;
 	at24->client[index].regmap = regmap;
@@ -693,10 +681,8 @@ static int at24_probe(struct i2c_client *client)
 	/* use dummy devices for multiple-address chips */
 	for (i = 1; i < num_addresses; i++) {
 		err = at24_make_dummy_client(at24, i, &regmap_config);
-		if (err) {
-			at24_remove_dummy_clients(at24);
+		if (err)
 			return err;
-		}
 	}
 
 	i2c_set_clientdata(client, at24);
@@ -713,7 +699,7 @@ static int at24_probe(struct i2c_client *client)
 	pm_runtime_idle(dev);
 	if (err) {
 		err = -ENODEV;
-		goto err_clients;
+		goto err_runtime_pm;
 	}
 
 	nvmem_config.name = dev_name(dev);
@@ -733,7 +719,7 @@ static int at24_probe(struct i2c_client *client)
 	at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
 	if (IS_ERR(at24->nvmem)) {
 		err = PTR_ERR(at24->nvmem);
-		goto err_clients;
+		goto err_runtime_pm;
 	}
 
 	dev_info(dev, "%u byte %s EEPROM, %s, %u bytes/write\n",
@@ -742,8 +728,7 @@ static int at24_probe(struct i2c_client *client)
 
 	return 0;
 
-err_clients:
-	at24_remove_dummy_clients(at24);
+err_runtime_pm:
 	pm_runtime_disable(dev);
 
 	return err;
@@ -751,11 +736,6 @@ static int at24_probe(struct i2c_client *client)
 
 static int at24_remove(struct i2c_client *client)
 {
-	struct at24_data *at24;
-
-	at24 = i2c_get_clientdata(client);
-
-	at24_remove_dummy_clients(at24);
 	pm_runtime_disable(&client->dev);
 	pm_runtime_set_suspended(&client->dev);
 
-- 
2.21.0


  reply	other threads:[~2019-05-20  7:10 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-20  7:10 [PATCH v2 0/2] at24: use devm_i2c_new_dummy_device() Bartosz Golaszewski
2019-05-20  7:10 ` Bartosz Golaszewski [this message]
2019-05-20 13:08   ` [PATCH v2 1/2] eeprom: " Wolfram Sang
2019-05-28 15:57     ` Bartosz Golaszewski
2019-05-20  7:10 ` [PATCH v2 2/2] eeprom: at24: drop unnecessary label Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190520071042.21072-2-brgl@bgdev.pl \
    --to=brgl@bgdev.pl \
    --cc=bgolaszewski@baylibre.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.