On Fri, May 17, 2019 at 06:08:43PM +0530, Vidya Sagar wrote:
> Enable PCIe controller nodes to enable respective PCIe slots on
> P2972-0000 board. Following is the ownership of slots by different
> PCIe controllers.
> Controller-0 : M.2 Key-M slot
> Controller-1 : On-board Marvell eSATA controller
> Controller-3 : M.2 Key-E slot
> 
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> ---
> Changes since [v6]:
> * None
> 
> Changes since [v5]:
> * Arranged PCIe nodes in the order of their addresses
> 
> Changes since [v4]:
> * None
> 
> Changes since [v3]:
> * None
> 
> Changes since [v2]:
> * Changed P2U label names to reflect new format that includes 'hsio'/'nvhs'
>   strings to reflect UPHY brick they belong to
> 
> Changes since [v1]:
> * Dropped 'pcie-' from phy-names property strings
> 
>  .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi |  2 +-
>  .../boot/dts/nvidia/tegra194-p2972-0000.dts   | 41 +++++++++++++++++++
>  2 files changed, 42 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
> index 0fd5bd29fbf9..30a83d4c5b69 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
> @@ -191,7 +191,7 @@
>  						regulator-boot-on;
>  					};
>  
> -					sd3 {
> +					vdd_1v8ao: sd3 {
>  						regulator-name = "VDD_1V8AO";
>  						regulator-min-microvolt = <1800000>;
>  						regulator-max-microvolt = <1800000>;
> diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> index 73801b48d1d8..a22704e76a84 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> @@ -167,4 +167,45 @@
>  			};
>  		};
>  	};
> +
> +	pcie@14100000 {
> +		status = "okay";
> +
> +		vddio-pex-ctl-supply = <&vdd_1v8ao>;
> +
> +		phys = <&p2u_hsio_0>;
> +		phy-names = "p2u-0";
> +	};
> +
> +	pcie@14140000 {
> +		status = "okay";
> +
> +		vddio-pex-ctl-supply = <&vdd_1v8ao>;
> +
> +		phys = <&p2u_hsio_7>;
> +		phy-names = "p2u-0";
> +	};
> +
> +	pcie@14180000 {
> +		status = "okay";
> +
> +		vddio-pex-ctl-supply = <&vdd_1v8ao>;
> +
> +		phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
> +		       <&p2u_hsio_5>;
> +		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
> +	};
> +
> +	pcie@141a0000 {
> +		status = "disabled";
> +
> +		vddio-pex-ctl-supply = <&vdd_1v8ao>;
> +
> +		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
> +		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
> +		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
> +
> +		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
> +			    "p2u-5", "p2u-6", "p2u-7";
> +	};

This last controller is disabled by default. Why do we need to include
all of this if it's not going to be used anyway?

Thierry