All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eduardo Valentin <edubezval@gmail.com>
To: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
	Rui Zhang <rui.zhang@intel.com>,
	ACPI Devel Maling List <linux-acpi@vger.kernel.org>,
	Linux PM <linux-pm@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [GIT PULL] Thermal-SoC management changes for v5.2-rc1
Date: Thu, 23 May 2019 19:40:47 -0700	[thread overview]
Message-ID: <20190524024047.GE1936@localhost.localdomain> (raw)
In-Reply-To: <CAAObsKD0_+cJQW0YtF9AkWn8XYP9wSYHTi_UhRiba7tH5EWTdw@mail.gmail.com>

On Thu, May 23, 2019 at 11:46:47AM +0200, Tomeu Vizoso wrote:
> Hi Eduardo,
> 
> I saw that for 5.1 [0] you included a kernelci boot report for your
> tree, but not for 5.2. Have you found anything that should be improved
> in KernelCI for it to be more useful to maintainers like you?

Honestly, I take a couple of automated testing as input before sending
my pulls to Linux: (a) my local test, (b) kernel-ci, and (c) 0-day.

There was really no reason specifically for me to not add the report
from kernelci, except..
> 
> [0] https://lore.kernel.org/lkml/20190306161207.GA7365@localhost.localdomain/
> 
> I found about this when trying to understand why the boot on the
> veyron-jaq board has been broken in 5.2-rc1.
> 

I remember a report saying this failed, but from what I could tell from
the boot log, the board booted and hit terminal. But apparently, after
all reports from developers, the veyron-jaq boards were in a hang state.

That was hard for me to tell from your logs, as they looked like
a regular boot that hits terminal.

Maybe I should have looked for a specific output of a command you guys
run, saying "successful boot" somewhere?

> Thanks,
> 
> Tomeu
> 
> On Thu, 16 May 2019 at 06:43, Eduardo Valentin <edubezval@gmail.com> wrote:
> >
> > Hello Linus,
> >
> > Please consider the following thermal soc changes for v5.2-rc1.
> >
> > The following changes since commit 37624b58542fb9f2d9a70e6ea006ef8a5f66c30b:
> >
> >   Linux 5.1-rc7 (2019-04-28 17:04:13 -0700)
> >
> > are available in the git repository at:
> >
> >   git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal linus
> >
> > for you to fetch changes up to 37bcec5d9f71bd13142a97d2196b293c9ac23823:
> >
> >   hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register (2019-05-14 07:00:47 -0700)
> >
> > Specifics:
> > - thermal core has a new devm_* API for registering cooling devices, thanks to Guenter R.
> >   I took the entire series, that is why you see changes on drivers/hwmon in this pull.
> > - rockchip thermal driver gains support to PX30 SoC, thanks to Elaine Z.
> > - the generic-adc thermal driver now considers the lookup table DT property as optional,
> >   thanks to Jean-Francois D.
> > - Refactoring of tsens thermal driver, thanks to Amit K.
> > - Cleanups on cpu cooling driver, thanks to Daniel L.
> > - broadcom thermal driver dropped support to ACPI, thanks to Srinath M.
> > - tegra thermal driver gains support to OC hw throttle and GPU throtle, thanks to Wei Ni.
> > - Fixes in several thermal drivers.
> >
> > BR,
> >
> > Eduardo Valentin
> >
> > ----------------------------------------------------------------
> > Amit Kucheria (21):
> >       drivers: thermal: tsens: Document the data structures
> >       drivers: thermal: tsens: Rename tsens_data
> >       drivers: thermal: tsens: Rename tsens_device
> >       drivers: thermal: tsens: Rename variable tmdev
> >       drivers: thermal: tsens: Use consistent names for variables
> >       drivers: thermal: tsens: Function prototypes should have argument names
> >       drivers: thermal: tsens: Rename tsens-8916 to prepare to merge with tsens-8974
> >       drivers: thermal: tsens: Rename constants to prepare to merge with tsens-8974
> >       drivers: thermal: tsens: Merge tsens-8974 into tsens-v0_1
> >       drivers: thermal: tsens: Introduce reg_fields to deal with register description
> >       drivers: thermal: tsens: Save reference to the device pointer and use it
> >       drivers: thermal: tsens: Don't print error message on -EPROBE_DEFER
> >       drivers: thermal: tsens: Add new operation to check if a sensor is enabled
> >       drivers: thermal: tsens: change data type for sensor IDs
> >       drivers: thermal: tsens: Introduce IP-specific max_sensor count
> >       drivers: thermal: tsens: simplify get_temp_tsens_v2 routine
> >       drivers: thermal: tsens: Move get_temp_tsens_v2 to allow sharing
> >       drivers: thermal: tsens: Common get_temp() learns to do ADC conversion
> >       dt: thermal: tsens: Add bindings for qcs404
> >       drivers: thermal: tsens: Add generic support for TSENS v1 IP
> >       drivers: thermal: tsens: Move calibration constants to header file
> >
> > Andrey Smirnov (1):
> >       thermal: qoriq: Remove unnecessary DT node is NULL check
> >
> > Daniel Lezcano (4):
> >       thermal/drivers/cpu_cooling: Remove pointless test in power2state()
> >       thermal/drivers/cpu_cooling: Fixup the header and copyright
> >       thermal/drivers/cpu_cooling: Add Software Package Data Exchange (SPDX)
> >       thermal/drivers/cpu_cooling: Remove pointless field
> >
> > Elaine Zhang (3):
> >       thermal: rockchip: fix up the tsadc pinctrl setting error
> >       dt-bindings: rockchip-thermal: Support the PX30 SoC compatible
> >       thermal: rockchip: Support the PX30 SoC in thermal driver
> >
> > Enrico Weigelt, metux IT consult (1):
> >       drivers: thermal: Kconfig: pedantic cleanups
> >
> > Guenter Roeck (6):
> >       thermal: Introduce devm_thermal_of_cooling_device_register
> >       hwmon: (aspeed-pwm-tacho) Use devm_thermal_of_cooling_device_register
> >       hwmon: (gpio-fan) Use devm_thermal_of_cooling_device_register
> >       hwmon: (mlxreg-fan) Use devm_thermal_of_cooling_device_register
> >       hwmon: (npcm750-pwm-fan) Use devm_thermal_of_cooling_device_register
> >       hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register
> >
> > Hoan Nguyen An (1):
> >       thermal: rcar_gen3_thermal: Fix init value of IRQCTL register
> >
> > Jean-Francois Dagenais (2):
> >       thermal: generic-adc: make lookup table optional
> >       dt-bindings: thermal: generic-adc: make lookup-table optional
> >
> > Jiada Wang (3):
> >       thermal: rcar_gen3_thermal: fix interrupt type
> >       thermal: rcar_gen3_thermal: disable interrupt in .remove
> >       thermal: rcar_gen3_thermal: Fix to show correct trip points number
> >
> > Matthias Kaehlcke (1):
> >       thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power
> >
> > Srinath Mannam (1):
> >       thermal: broadcom: Remove ACPI support
> >
> > Talel Shenhar (3):
> >       dt-bindings: thermal: al-thermal: Add binding documentation
> >       thermal: Introduce Amazon's Annapurna Labs Thermal Driver
> >       thermal: Fix build error of missing devm_ioremap_resource on UM
> >
> > Wei Ni (9):
> >       of: Add bindings of thermtrip for Tegra soctherm
> >       thermal: tegra: support hw and sw shutdown
> >       of: Add bindings of gpu hw throttle for Tegra soctherm
> >       thermal: tegra: add support for gpu hw-throttle
> >       thermal: tegra: add support for thermal IRQ
> >       thermal: tegra: add set_trips functionality
> >       thermal: tegra: add support for EDP IRQ
> >       of: Add bindings of OC hw throttle for Tegra soctherm
> >       thermal: tegra: enable OC hw throttle
> >
> > Wolfram Sang (1):
> >       thermal: stm32: simplify getting .driver_data
> >
> > Yangtao Li (1):
> >       of: thermal: Improve print information
> >
> > Yoshihiro Kaneko (1):
> >       thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs
> >
> >  .../bindings/thermal/amazon,al-thermal.txt         |  33 +
> >  .../bindings/thermal/nvidia,tegra124-soctherm.txt  |  62 +-
> >  .../devicetree/bindings/thermal/qcom-tsens.txt     |  14 +
> >  .../bindings/thermal/rockchip-thermal.txt          |   1 +
> >  .../bindings/thermal/thermal-generic-adc.txt       |  10 +-
> >  MAINTAINERS                                        |   6 +
> >  drivers/hwmon/aspeed-pwm-tacho.c                   |   6 +-
> >  drivers/hwmon/gpio-fan.c                           |  25 +-
> >  drivers/hwmon/mlxreg-fan.c                         |  31 +-
> >  drivers/hwmon/npcm750-pwm-fan.c                    |   6 +-
> >  drivers/hwmon/pwm-fan.c                            |  73 +-
> >  drivers/thermal/Kconfig                            |  11 +
> >  drivers/thermal/Makefile                           |   1 +
> >  drivers/thermal/broadcom/sr-thermal.c              |   8 -
> >  drivers/thermal/cpu_cooling.c                      |  30 +-
> >  drivers/thermal/of-thermal.c                       |   3 +
> >  drivers/thermal/qcom/Makefile                      |   4 +-
> >  drivers/thermal/qcom/tsens-8916.c                  | 105 ---
> >  drivers/thermal/qcom/tsens-8960.c                  |  84 +-
> >  drivers/thermal/qcom/tsens-common.c                | 159 +++-
> >  .../thermal/qcom/{tsens-8974.c => tsens-v0_1.c}    | 166 +++-
> >  drivers/thermal/qcom/tsens-v1.c                    | 193 +++++
> >  drivers/thermal/qcom/tsens-v2.c                    | 111 +--
> >  drivers/thermal/qcom/tsens.c                       | 100 ++-
> >  drivers/thermal/qcom/tsens.h                       | 291 ++++++-
> >  drivers/thermal/qoriq_thermal.c                    |   5 -
> >  drivers/thermal/rcar_gen3_thermal.c                |  51 +-
> >  drivers/thermal/rcar_thermal.c                     |  11 +-
> >  drivers/thermal/rockchip_thermal.c                 |  74 +-
> >  drivers/thermal/st/Kconfig                         |  22 +-
> >  drivers/thermal/st/stm_thermal.c                   |   6 +-
> >  drivers/thermal/tegra/Kconfig                      |   4 +-
> >  drivers/thermal/tegra/soctherm.c                   | 961 +++++++++++++++++++--
> >  drivers/thermal/tegra/soctherm.h                   |  16 +
> >  drivers/thermal/tegra/tegra124-soctherm.c          |   7 +-
> >  drivers/thermal/tegra/tegra132-soctherm.c          |   7 +-
> >  drivers/thermal/tegra/tegra210-soctherm.c          |  15 +-
> >  drivers/thermal/thermal-generic-adc.c              |   9 +-
> >  drivers/thermal/thermal_core.c                     |  49 ++
> >  drivers/thermal/thermal_mmio.c                     | 129 +++
> >  include/dt-bindings/thermal/tegra124-soctherm.h    |   8 +-
> >  include/linux/thermal.h                            |  13 +
> >  42 files changed, 2330 insertions(+), 590 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt
> >  delete mode 100644 drivers/thermal/qcom/tsens-8916.c
> >  rename drivers/thermal/qcom/{tsens-8974.c => tsens-v0_1.c} (56%)
> >  create mode 100644 drivers/thermal/qcom/tsens-v1.c
> >  create mode 100644 drivers/thermal/thermal_mmio.c

  reply	other threads:[~2019-05-24  2:40 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-16  4:43 Eduardo Valentin
2019-05-16 15:07 ` Linus Torvalds
2019-05-16 16:11   ` Stefan Wahren
2019-05-17 12:25     ` Stefan Wahren
2019-05-16 16:55   ` Guenter Roeck
2019-05-24  2:37     ` Eduardo Valentin
2019-05-16 15:10 ` pr-tracker-bot
2019-05-23  9:46 ` Tomeu Vizoso
2019-05-24  2:40   ` Eduardo Valentin [this message]
2019-05-24  8:23     ` Tomeu Vizoso
2019-05-24 13:54       ` Eduardo Valentin
2019-05-27 11:26         ` Tomeu Vizoso

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190524024047.GE1936@localhost.localdomain \
    --to=edubezval@gmail.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=tomeu@tomeuvizoso.net \
    --cc=torvalds@linux-foundation.org \
    --subject='Re: [GIT PULL] Thermal-SoC management changes for v5.2-rc1' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.