From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Fri, 24 May 2019 13:43:56 -0400 Subject: [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2 In-Reply-To: References: Message-ID: <20190524174356.GB7665@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, May 23, 2019 at 01:48:21PM -0300, Fabio Estevam wrote: > On Thu, May 23, 2019 at 1:11 PM Jagan Teki wrote: > > > Don't know whether this is SPL size issue or not? can you try > > SPL_OF_PLATDATA and TINY* I can see the size reduced with 64512 bytes > > (one build issue on fdtdec_get_int undefined) > > Yes, it does not build with CONFIG_SPL_OF_PLATDATA: > > lib/built-in.o: In function `fdtdec_parse_phandle_with_args': > /home/fabio/u-boot/lib/fdtdec.c:788: undefined reference to `fdtdec_get_int' > drivers/built-in.o: In function `fsl_esdhc_probe': > /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1480: undefined reference > to `fdtdec_get_int' > /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1482: undefined reference > to `fdtdec_get_int' > /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1485: undefined reference > to `fdtdec_get_int' > scripts/Makefile.spl:404: recipe for target 'spl/u-boot-spl' failed > make[1]: *** [spl/u-boot-spl] Error 1 > > Thanks for the suggestions, but at this point I prefer to go with the > removal of CONFIG_SPL_DM. > > For 2019.07 it would be really nice if we could fix these two issues: > > 1. Allow to load a FIT image via Serial Download Protocol > > 2. Detect the SPL size overflow in build-time For #2, I am very hopeful we can pull in Simon Goldschmidt's patch that allows us to set the size limit in such ways as to catch overflows like this. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: