All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jan Kara <jack@suse.cz>
To: Ted Tso <tytso@mit.edu>
Cc: <linux-ext4@vger.kernel.org>, Ira Weiny <ira.weiny@intel.com>,
	Jan Kara <jack@suse.cz>
Subject: [PATCH v2] ext4: Gracefully handle ext4_break_layouts() failure during truncate
Date: Tue, 28 May 2019 10:05:45 +0200	[thread overview]
Message-ID: <20190528080545.10444-1-jack@suse.cz> (raw)

ext4_break_layouts() may fail e.g. due to a signal being delivered.
Thus we need to handle its failure gracefully and not by taking the
filesystem down. Currently ext4_break_layouts() failure is rare but it
may become more common once RDMA uses layout leases for handling
long-term page pins for DAX mappings.

To handle the failure we need to move ext4_break_layouts() earlier
during setattr handling before we do hard to undo changes such as
modifying inode size. To be able to do that we also have to move some
other checks which are better done without holding i_mmap_sem earlier.

Reported-and-tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
---
 fs/ext4/inode.c | 66 ++++++++++++++++++++++++++++++---------------------------
 1 file changed, 35 insertions(+), 31 deletions(-)

A version of the fix that passes also generic/092 test.

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index c7f77c643008..c16071547c9c 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -5571,7 +5571,7 @@ int ext4_setattr(struct dentry *dentry, struct iattr *attr)
 	if (attr->ia_valid & ATTR_SIZE) {
 		handle_t *handle;
 		loff_t oldsize = inode->i_size;
-		int shrink = (attr->ia_size <= inode->i_size);
+		int shrink = (attr->ia_size < inode->i_size);
 
 		if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) {
 			struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
@@ -5585,18 +5585,33 @@ int ext4_setattr(struct dentry *dentry, struct iattr *attr)
 		if (IS_I_VERSION(inode) && attr->ia_size != inode->i_size)
 			inode_inc_iversion(inode);
 
-		if (ext4_should_order_data(inode) &&
-		    (attr->ia_size < inode->i_size)) {
-			error = ext4_begin_ordered_truncate(inode,
+		if (shrink) {
+			if (ext4_should_order_data(inode)) {
+				error = ext4_begin_ordered_truncate(inode,
 							    attr->ia_size);
-			if (error)
-				goto err_out;
+				if (error)
+					goto err_out;
+			}
+			/*
+			 * Blocks are going to be removed from the inode. Wait
+			 * for dio in flight.
+			 */
+			inode_dio_wait(inode);
+		}
+
+		down_write(&EXT4_I(inode)->i_mmap_sem);
+
+		rc = ext4_break_layouts(inode);
+		if (rc) {
+			up_write(&EXT4_I(inode)->i_mmap_sem);
+			return rc;
 		}
+
 		if (attr->ia_size != inode->i_size) {
 			handle = ext4_journal_start(inode, EXT4_HT_INODE, 3);
 			if (IS_ERR(handle)) {
 				error = PTR_ERR(handle);
-				goto err_out;
+				goto out_mmap_sem;
 			}
 			if (ext4_handle_valid(handle) && shrink) {
 				error = ext4_orphan_add(handle, inode);
@@ -5624,42 +5639,31 @@ int ext4_setattr(struct dentry *dentry, struct iattr *attr)
 				i_size_write(inode, attr->ia_size);
 			up_write(&EXT4_I(inode)->i_data_sem);
 			ext4_journal_stop(handle);
-			if (error) {
-				if (orphan && inode->i_nlink)
-					ext4_orphan_del(NULL, inode);
-				goto err_out;
+			if (error)
+				goto out_mmap_sem;
+			if (!shrink) {
+				pagecache_isize_extended(inode, oldsize,
+							 inode->i_size);
+			} else if (ext4_should_journal_data(inode)) {
+				ext4_wait_for_tail_page_commit(inode);
 			}
 		}
-		if (!shrink) {
-			pagecache_isize_extended(inode, oldsize, inode->i_size);
-		} else {
-			/*
-			 * Blocks are going to be removed from the inode. Wait
-			 * for dio in flight.
-			 */
-			inode_dio_wait(inode);
-		}
-		if (orphan && ext4_should_journal_data(inode))
-			ext4_wait_for_tail_page_commit(inode);
-		down_write(&EXT4_I(inode)->i_mmap_sem);
-
-		rc = ext4_break_layouts(inode);
-		if (rc) {
-			up_write(&EXT4_I(inode)->i_mmap_sem);
-			error = rc;
-			goto err_out;
-		}
 
 		/*
 		 * Truncate pagecache after we've waited for commit
 		 * in data=journal mode to make pages freeable.
 		 */
 		truncate_pagecache(inode, inode->i_size);
-		if (shrink) {
+		/*
+		 * Call ext4_truncate() even if i_size didn't change to
+		 * truncate possible preallocated blocks.
+		 */
+		if (attr->ia_size <= oldsize) {
 			rc = ext4_truncate(inode);
 			if (rc)
 				error = rc;
 		}
+out_mmap_sem:
 		up_write(&EXT4_I(inode)->i_mmap_sem);
 	}
 
-- 
2.16.4


             reply	other threads:[~2019-05-28  8:11 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-28  8:05 Jan Kara [this message]
2019-05-30 18:59 ` [PATCH v2] ext4: Gracefully handle ext4_break_layouts() failure during truncate Theodore Ts'o

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190528080545.10444-1-jack@suse.cz \
    --to=jack@suse.cz \
    --cc=ira.weiny@intel.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.