* [PATCH v2 0/3] clk: meson: add support for Amlogic G12B
@ 2019-05-28 8:07 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-28 8:07 UTC (permalink / raw)
To: jbrunet
Cc: Neil Armstrong, linux-clk, linux-amlogic, linux-arm-kernel, linux-kernel
The Amlogic G12B SoC is very similar with the G12A SoC, sharing
most of the features and architecture.
G12B clock tree is very close, the main differences are :
- SYS_PLL is used for the second cluster (otherwise used fir the first on G12a)
- SYS_PLL1 is used for the first cluster (instead of SYS_PLL on G12a)
- A duplicate CPU tree is added for the second cluster
- G12B has additional clocks like for CSI an other components, not handled yet
Dependencies :
- Patch 1, 3 : None
- Patch 2 : Depends on Guillaume's Temperature sensor Clock patches at [1]
This patchset is a spinoff of the v2 Odroid-N2 megapatchset at [2]
Changes since v1 at [3]:
- Added the cpub_clk div2..8 and replaces the ahb/atb/axi/trace divs by muxes
- Added the CLK_GATE_SET_TO_DISABLE flag to ahb/atb/axi/trace gates
- Fixed all the G12A typos
- Added martin's reviewed by on patch 1
Changes since original patchset :
- Added missing sys1_pll div16, cpub div16 and cpub atb/axi/ahb/trace clocks
- Rewrote "This patch .." in commit messages
[1] https://lkml.kernel.org/r/20190412100221.26740-1-glaroque@baylibre.com
[2] https://lkml.kernel.org/r/20190423091503.10847-1-narmstrong@baylibre.com
[3] https://lkml.kernel.org/r/20190521150130.31684-1-narmstrong@baylibre.com
Neil Armstrong (3):
dt-bindings: clk: meson: add g12b periph clock controller bindings
clk: meson: g12a: Add support for G12B CPUB clocks
clk: meson: g12a: mark fclk_div3 as critical
.../bindings/clock/amlogic,gxbb-clkc.txt | 1 +
drivers/clk/meson/g12a.c | 772 ++++++++++++++++++
drivers/clk/meson/g12a.h | 40 +-
3 files changed, 812 insertions(+), 1 deletion(-)
--
2.21.0
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 0/3] clk: meson: add support for Amlogic G12B
@ 2019-05-28 8:07 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-28 8:07 UTC (permalink / raw)
To: jbrunet
Cc: linux-amlogic, linux-kernel, linux-clk, linux-arm-kernel, Neil Armstrong
The Amlogic G12B SoC is very similar with the G12A SoC, sharing
most of the features and architecture.
G12B clock tree is very close, the main differences are :
- SYS_PLL is used for the second cluster (otherwise used fir the first on G12a)
- SYS_PLL1 is used for the first cluster (instead of SYS_PLL on G12a)
- A duplicate CPU tree is added for the second cluster
- G12B has additional clocks like for CSI an other components, not handled yet
Dependencies :
- Patch 1, 3 : None
- Patch 2 : Depends on Guillaume's Temperature sensor Clock patches at [1]
This patchset is a spinoff of the v2 Odroid-N2 megapatchset at [2]
Changes since v1 at [3]:
- Added the cpub_clk div2..8 and replaces the ahb/atb/axi/trace divs by muxes
- Added the CLK_GATE_SET_TO_DISABLE flag to ahb/atb/axi/trace gates
- Fixed all the G12A typos
- Added martin's reviewed by on patch 1
Changes since original patchset :
- Added missing sys1_pll div16, cpub div16 and cpub atb/axi/ahb/trace clocks
- Rewrote "This patch .." in commit messages
[1] https://lkml.kernel.org/r/20190412100221.26740-1-glaroque@baylibre.com
[2] https://lkml.kernel.org/r/20190423091503.10847-1-narmstrong@baylibre.com
[3] https://lkml.kernel.org/r/20190521150130.31684-1-narmstrong@baylibre.com
Neil Armstrong (3):
dt-bindings: clk: meson: add g12b periph clock controller bindings
clk: meson: g12a: Add support for G12B CPUB clocks
clk: meson: g12a: mark fclk_div3 as critical
.../bindings/clock/amlogic,gxbb-clkc.txt | 1 +
drivers/clk/meson/g12a.c | 772 ++++++++++++++++++
drivers/clk/meson/g12a.h | 40 +-
3 files changed, 812 insertions(+), 1 deletion(-)
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 0/3] clk: meson: add support for Amlogic G12B
@ 2019-05-28 8:07 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-28 8:07 UTC (permalink / raw)
To: jbrunet
Cc: linux-amlogic, linux-kernel, linux-clk, linux-arm-kernel, Neil Armstrong
The Amlogic G12B SoC is very similar with the G12A SoC, sharing
most of the features and architecture.
G12B clock tree is very close, the main differences are :
- SYS_PLL is used for the second cluster (otherwise used fir the first on G12a)
- SYS_PLL1 is used for the first cluster (instead of SYS_PLL on G12a)
- A duplicate CPU tree is added for the second cluster
- G12B has additional clocks like for CSI an other components, not handled yet
Dependencies :
- Patch 1, 3 : None
- Patch 2 : Depends on Guillaume's Temperature sensor Clock patches at [1]
This patchset is a spinoff of the v2 Odroid-N2 megapatchset at [2]
Changes since v1 at [3]:
- Added the cpub_clk div2..8 and replaces the ahb/atb/axi/trace divs by muxes
- Added the CLK_GATE_SET_TO_DISABLE flag to ahb/atb/axi/trace gates
- Fixed all the G12A typos
- Added martin's reviewed by on patch 1
Changes since original patchset :
- Added missing sys1_pll div16, cpub div16 and cpub atb/axi/ahb/trace clocks
- Rewrote "This patch .." in commit messages
[1] https://lkml.kernel.org/r/20190412100221.26740-1-glaroque@baylibre.com
[2] https://lkml.kernel.org/r/20190423091503.10847-1-narmstrong@baylibre.com
[3] https://lkml.kernel.org/r/20190521150130.31684-1-narmstrong@baylibre.com
Neil Armstrong (3):
dt-bindings: clk: meson: add g12b periph clock controller bindings
clk: meson: g12a: Add support for G12B CPUB clocks
clk: meson: g12a: mark fclk_div3 as critical
.../bindings/clock/amlogic,gxbb-clkc.txt | 1 +
drivers/clk/meson/g12a.c | 772 ++++++++++++++++++
drivers/clk/meson/g12a.h | 40 +-
3 files changed, 812 insertions(+), 1 deletion(-)
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 1/3] dt-bindings: clk: meson: add g12b periph clock controller bindings
2019-05-28 8:07 ` Neil Armstrong
(?)
@ 2019-05-28 8:07 ` Neil Armstrong
-1 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-28 8:07 UTC (permalink / raw)
To: jbrunet, devicetree
Cc: Neil Armstrong, linux-clk, linux-amlogic, linux-arm-kernel,
linux-kernel, Rob Herring, Martin Blumenstingl
Update the documentation to support clock driver for the Amlogic G12B SoC.
G12B clock driver is very close, the main differences are :
- the clock tree is duplicated for the both clusters, and the
SYS_PLL are swapped between the clusters
- G12B has additional clocks like for CSI an other components
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index 5c8b105be4d6..6eaa52092313 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -10,6 +10,7 @@ Required Properties:
"amlogic,gxl-clkc" for GXL and GXM SoC,
"amlogic,axg-clkc" for AXG SoC.
"amlogic,g12a-clkc" for G12A SoC.
+ "amlogic,g12b-clkc" for G12B SoC.
- clocks : list of clock phandle, one for each entry clock-names.
- clock-names : should contain the following:
* "xtal": the platform xtal
--
2.21.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 1/3] dt-bindings: clk: meson: add g12b periph clock controller bindings
@ 2019-05-28 8:07 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-28 8:07 UTC (permalink / raw)
To: jbrunet, devicetree
Cc: Rob Herring, Neil Armstrong, Martin Blumenstingl, linux-kernel,
linux-amlogic, linux-clk, linux-arm-kernel
Update the documentation to support clock driver for the Amlogic G12B SoC.
G12B clock driver is very close, the main differences are :
- the clock tree is duplicated for the both clusters, and the
SYS_PLL are swapped between the clusters
- G12B has additional clocks like for CSI an other components
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index 5c8b105be4d6..6eaa52092313 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -10,6 +10,7 @@ Required Properties:
"amlogic,gxl-clkc" for GXL and GXM SoC,
"amlogic,axg-clkc" for AXG SoC.
"amlogic,g12a-clkc" for G12A SoC.
+ "amlogic,g12b-clkc" for G12B SoC.
- clocks : list of clock phandle, one for each entry clock-names.
- clock-names : should contain the following:
* "xtal": the platform xtal
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 1/3] dt-bindings: clk: meson: add g12b periph clock controller bindings
@ 2019-05-28 8:07 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-28 8:07 UTC (permalink / raw)
To: jbrunet, devicetree
Cc: Rob Herring, Neil Armstrong, Martin Blumenstingl, linux-kernel,
linux-amlogic, linux-clk, linux-arm-kernel
Update the documentation to support clock driver for the Amlogic G12B SoC.
G12B clock driver is very close, the main differences are :
- the clock tree is duplicated for the both clusters, and the
SYS_PLL are swapped between the clusters
- G12B has additional clocks like for CSI an other components
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index 5c8b105be4d6..6eaa52092313 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -10,6 +10,7 @@ Required Properties:
"amlogic,gxl-clkc" for GXL and GXM SoC,
"amlogic,axg-clkc" for AXG SoC.
"amlogic,g12a-clkc" for G12A SoC.
+ "amlogic,g12b-clkc" for G12B SoC.
- clocks : list of clock phandle, one for each entry clock-names.
- clock-names : should contain the following:
* "xtal": the platform xtal
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 2/3] clk: meson: g12a: Add support for G12B CPUB clocks
2019-05-28 8:07 ` Neil Armstrong
(?)
@ 2019-05-28 8:07 ` Neil Armstrong
-1 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-28 8:07 UTC (permalink / raw)
To: jbrunet
Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel, linux-clk
Update the Meson G12A Clock driver to support the Amlogic G12B SoC.
G12B clock driver is very close, the main differences are :
- the clock tree is duplicated for the both clusters, and the
SYS_PLL are swapped between the clusters
- G12B has additional clocks like for CSI an other components
Here only the cpu clock tree is handled.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/g12a.c | 762 +++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/g12a.h | 40 +-
2 files changed, 801 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index a7b621bebb7e..1abe46a95dc1 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -150,6 +150,57 @@ static struct clk_regmap g12a_sys_pll = {
},
};
+static struct clk_regmap g12b_sys1_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .l = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 29,
+ .width = 1,
+ },
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sys1_pll_dco",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12b_sys1_pll = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS1_PLL_CNTL0,
+ .shift = 16,
+ .width = 3,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sys1_pll",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "sys1_pll_dco" },
+ .num_parents = 1,
+ },
+};
+
static struct clk_regmap g12a_sys_pll_div16_en = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_SYS_CPU_CLK_CNTL1,
@@ -167,6 +218,23 @@ static struct clk_regmap g12a_sys_pll_div16_en = {
},
};
+static struct clk_regmap g12b_sys1_pll_div16_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sys1_pll_div16_en",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "sys1_pll" },
+ .num_parents = 1,
+ /*
+ * This clock is used to debug the sys_pll range
+ * Linux should not change it at runtime
+ */
+ },
+};
+
static struct clk_fixed_factor g12a_sys_pll_div16 = {
.mult = 1,
.div = 16,
@@ -178,6 +246,17 @@ static struct clk_fixed_factor g12a_sys_pll_div16 = {
},
};
+static struct clk_fixed_factor g12b_sys1_pll_div16 = {
+ .mult = 1,
+ .div = 16,
+ .hw.init = &(struct clk_init_data){
+ .name = "sys1_pll_div16",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "sys1_pll_div16_en" },
+ .num_parents = 1,
+ },
+};
+
/* Datasheet names this field as "premux0" */
static struct clk_regmap g12a_cpu_clk_premux0 = {
.data = &(struct clk_regmap_mux_data){
@@ -306,6 +385,150 @@ static struct clk_regmap g12a_cpu_clk = {
},
};
+/* Datasheet names this field as "Final_mux_sel" */
+static struct clk_regmap g12b_cpu_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL0,
+ .mask = 0x1,
+ .shift = 11,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpu_clk_dyn",
+ "sys1_pll" },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "premux0" */
+static struct clk_regmap g12b_cpub_clk_premux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x3,
+ .shift = 0,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn0_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal",
+ "fclk_div2",
+ "fclk_div3" },
+ .num_parents = 3,
+ },
+};
+
+/* Datasheet names this field as "mux0_divn_tcnt" */
+static struct clk_regmap g12b_cpub_clk_mux0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .shift = 4,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn0_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn0_sel" },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux0" */
+static struct clk_regmap g12b_cpub_clk_postmux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x1,
+ .shift = 2,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn0",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn0_sel",
+ "cpub_clk_dyn0_div" },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "premux1" */
+static struct clk_regmap g12b_cpub_clk_premux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x3,
+ .shift = 16,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn1_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal",
+ "fclk_div2",
+ "fclk_div3" },
+ .num_parents = 3,
+ },
+};
+
+/* Datasheet names this field as "Mux1_divn_tcnt" */
+static struct clk_regmap g12b_cpub_clk_mux1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .shift = 20,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn1_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn1_sel" },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux1" */
+static struct clk_regmap g12b_cpub_clk_postmux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x1,
+ .shift = 18,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn1",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn1_sel",
+ "cpub_clk_dyn1_div" },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_dyn_mux_sel" */
+static struct clk_regmap g12b_cpub_clk_dyn = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x1,
+ .shift = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn0",
+ "cpub_clk_dyn1" },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_mux_sel" */
+static struct clk_regmap g12b_cpub_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x1,
+ .shift = 11,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn",
+ "sys_pll" },
+ .num_parents = 2,
+ },
+};
+
static struct clk_regmap g12a_cpu_clk_div16_en = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_SYS_CPU_CLK_CNTL1,
@@ -323,6 +546,23 @@ static struct clk_regmap g12a_cpu_clk_div16_en = {
},
};
+static struct clk_regmap g12b_cpub_clk_div16_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_div16_en",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ /*
+ * This clock is used to debug the cpu_clk range
+ * Linux should not change it at runtime
+ */
+ },
+};
+
static struct clk_fixed_factor g12a_cpu_clk_div16 = {
.mult = 1,
.div = 16,
@@ -334,6 +574,17 @@ static struct clk_fixed_factor g12a_cpu_clk_div16 = {
},
};
+static struct clk_fixed_factor g12b_cpub_clk_div16 = {
+ .mult = 1,
+ .div = 16,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div16",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div16_en" },
+ .num_parents = 1,
+ },
+};
+
static struct clk_regmap g12a_cpu_clk_apb_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_SYS_CPU_CLK_CNTL1,
@@ -462,6 +713,240 @@ static struct clk_regmap g12a_cpu_clk_trace = {
},
};
+static struct clk_fixed_factor g12b_cpub_clk_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div2",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div3 = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div3",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div4 = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div4",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div5 = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div5",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div6 = {
+ .mult = 1,
+ .div = 6,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div6",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div7 = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div7",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div8 = {
+ .mult = 1,
+ .div = 8,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div8",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static u32 mux_table_cpub[] = { 1, 2, 3, 4, 5, 6, 7 };
+static struct clk_regmap g12b_cpub_clk_apb_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .mask = 7,
+ .shift = 3,
+ .table = mux_table_cpub,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_apb_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div2",
+ "cpub_clk_div3",
+ "cpub_clk_div4",
+ "cpub_clk_div5",
+ "cpub_clk_div6",
+ "cpub_clk_div7",
+ "cpub_clk_div8" },
+ .num_parents = 7,
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_apb = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 16,
+ .flags = CLK_GATE_SET_TO_DISABLE,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_apb",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_apb_sel" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_atb_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .mask = 7,
+ .shift = 6,
+ .table = mux_table_cpub,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_atb_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div2",
+ "cpub_clk_div3",
+ "cpub_clk_div4",
+ "cpub_clk_div5",
+ "cpub_clk_div6",
+ "cpub_clk_div7",
+ "cpub_clk_div8" },
+ .num_parents = 7,
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_atb = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 17,
+ .flags = CLK_GATE_SET_TO_DISABLE,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_atb",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_atb_sel" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_axi_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .mask = 7,
+ .shift = 9,
+ .table = mux_table_cpub,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_axi_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div2",
+ "cpub_clk_div3",
+ "cpub_clk_div4",
+ "cpub_clk_div5",
+ "cpub_clk_div6",
+ "cpub_clk_div7",
+ "cpub_clk_div8" },
+ .num_parents = 7,
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_axi = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 18,
+ .flags = CLK_GATE_SET_TO_DISABLE,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_axi",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_axi_sel" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_trace_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .mask = 7,
+ .shift = 20,
+ .table = mux_table_cpub,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_trace_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div2",
+ "cpub_clk_div3",
+ "cpub_clk_div4",
+ "cpub_clk_div5",
+ "cpub_clk_div6",
+ "cpub_clk_div7",
+ "cpub_clk_div8" },
+ .num_parents = 7,
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_trace = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 23,
+ .flags = CLK_GATE_SET_TO_DISABLE,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_trace",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_trace_sel" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ },
+};
+
static const struct pll_mult_range g12a_gp0_pll_mult_range = {
.min = 125,
.max = 255,
@@ -2827,6 +3312,255 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
.num = NR_CLKS,
};
+static struct clk_hw_onecell_data g12b_hw_onecell_data = {
+ .hws = {
+ [CLKID_SYS_PLL] = &g12a_sys_pll.hw,
+ [CLKID_FIXED_PLL] = &g12a_fixed_pll.hw,
+ [CLKID_FCLK_DIV2] = &g12a_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &g12a_fclk_div3.hw,
+ [CLKID_FCLK_DIV4] = &g12a_fclk_div4.hw,
+ [CLKID_FCLK_DIV5] = &g12a_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &g12a_fclk_div7.hw,
+ [CLKID_FCLK_DIV2P5] = &g12a_fclk_div2p5.hw,
+ [CLKID_GP0_PLL] = &g12a_gp0_pll.hw,
+ [CLKID_MPEG_SEL] = &g12a_mpeg_clk_sel.hw,
+ [CLKID_MPEG_DIV] = &g12a_mpeg_clk_div.hw,
+ [CLKID_CLK81] = &g12a_clk81.hw,
+ [CLKID_MPLL0] = &g12a_mpll0.hw,
+ [CLKID_MPLL1] = &g12a_mpll1.hw,
+ [CLKID_MPLL2] = &g12a_mpll2.hw,
+ [CLKID_MPLL3] = &g12a_mpll3.hw,
+ [CLKID_DDR] = &g12a_ddr.hw,
+ [CLKID_DOS] = &g12a_dos.hw,
+ [CLKID_AUDIO_LOCKER] = &g12a_audio_locker.hw,
+ [CLKID_MIPI_DSI_HOST] = &g12a_mipi_dsi_host.hw,
+ [CLKID_ETH_PHY] = &g12a_eth_phy.hw,
+ [CLKID_ISA] = &g12a_isa.hw,
+ [CLKID_PL301] = &g12a_pl301.hw,
+ [CLKID_PERIPHS] = &g12a_periphs.hw,
+ [CLKID_SPICC0] = &g12a_spicc_0.hw,
+ [CLKID_I2C] = &g12a_i2c.hw,
+ [CLKID_SANA] = &g12a_sana.hw,
+ [CLKID_SD] = &g12a_sd.hw,
+ [CLKID_RNG0] = &g12a_rng0.hw,
+ [CLKID_UART0] = &g12a_uart0.hw,
+ [CLKID_SPICC1] = &g12a_spicc_1.hw,
+ [CLKID_HIU_IFACE] = &g12a_hiu_reg.hw,
+ [CLKID_MIPI_DSI_PHY] = &g12a_mipi_dsi_phy.hw,
+ [CLKID_ASSIST_MISC] = &g12a_assist_misc.hw,
+ [CLKID_SD_EMMC_A] = &g12a_emmc_a.hw,
+ [CLKID_SD_EMMC_B] = &g12a_emmc_b.hw,
+ [CLKID_SD_EMMC_C] = &g12a_emmc_c.hw,
+ [CLKID_AUDIO_CODEC] = &g12a_audio_codec.hw,
+ [CLKID_AUDIO] = &g12a_audio.hw,
+ [CLKID_ETH] = &g12a_eth_core.hw,
+ [CLKID_DEMUX] = &g12a_demux.hw,
+ [CLKID_AUDIO_IFIFO] = &g12a_audio_ififo.hw,
+ [CLKID_ADC] = &g12a_adc.hw,
+ [CLKID_UART1] = &g12a_uart1.hw,
+ [CLKID_G2D] = &g12a_g2d.hw,
+ [CLKID_RESET] = &g12a_reset.hw,
+ [CLKID_PCIE_COMB] = &g12a_pcie_comb.hw,
+ [CLKID_PARSER] = &g12a_parser.hw,
+ [CLKID_USB] = &g12a_usb_general.hw,
+ [CLKID_PCIE_PHY] = &g12a_pcie_phy.hw,
+ [CLKID_AHB_ARB0] = &g12a_ahb_arb0.hw,
+ [CLKID_AHB_DATA_BUS] = &g12a_ahb_data_bus.hw,
+ [CLKID_AHB_CTRL_BUS] = &g12a_ahb_ctrl_bus.hw,
+ [CLKID_HTX_HDCP22] = &g12a_htx_hdcp22.hw,
+ [CLKID_HTX_PCLK] = &g12a_htx_pclk.hw,
+ [CLKID_BT656] = &g12a_bt656.hw,
+ [CLKID_USB1_DDR_BRIDGE] = &g12a_usb1_to_ddr.hw,
+ [CLKID_MMC_PCLK] = &g12a_mmc_pclk.hw,
+ [CLKID_UART2] = &g12a_uart2.hw,
+ [CLKID_VPU_INTR] = &g12a_vpu_intr.hw,
+ [CLKID_GIC] = &g12a_gic.hw,
+ [CLKID_SD_EMMC_A_CLK0_SEL] = &g12a_sd_emmc_a_clk0_sel.hw,
+ [CLKID_SD_EMMC_A_CLK0_DIV] = &g12a_sd_emmc_a_clk0_div.hw,
+ [CLKID_SD_EMMC_A_CLK0] = &g12a_sd_emmc_a_clk0.hw,
+ [CLKID_SD_EMMC_B_CLK0_SEL] = &g12a_sd_emmc_b_clk0_sel.hw,
+ [CLKID_SD_EMMC_B_CLK0_DIV] = &g12a_sd_emmc_b_clk0_div.hw,
+ [CLKID_SD_EMMC_B_CLK0] = &g12a_sd_emmc_b_clk0.hw,
+ [CLKID_SD_EMMC_C_CLK0_SEL] = &g12a_sd_emmc_c_clk0_sel.hw,
+ [CLKID_SD_EMMC_C_CLK0_DIV] = &g12a_sd_emmc_c_clk0_div.hw,
+ [CLKID_SD_EMMC_C_CLK0] = &g12a_sd_emmc_c_clk0.hw,
+ [CLKID_MPLL0_DIV] = &g12a_mpll0_div.hw,
+ [CLKID_MPLL1_DIV] = &g12a_mpll1_div.hw,
+ [CLKID_MPLL2_DIV] = &g12a_mpll2_div.hw,
+ [CLKID_MPLL3_DIV] = &g12a_mpll3_div.hw,
+ [CLKID_FCLK_DIV2_DIV] = &g12a_fclk_div2_div.hw,
+ [CLKID_FCLK_DIV3_DIV] = &g12a_fclk_div3_div.hw,
+ [CLKID_FCLK_DIV4_DIV] = &g12a_fclk_div4_div.hw,
+ [CLKID_FCLK_DIV5_DIV] = &g12a_fclk_div5_div.hw,
+ [CLKID_FCLK_DIV7_DIV] = &g12a_fclk_div7_div.hw,
+ [CLKID_FCLK_DIV2P5_DIV] = &g12a_fclk_div2p5_div.hw,
+ [CLKID_HIFI_PLL] = &g12a_hifi_pll.hw,
+ [CLKID_VCLK2_VENCI0] = &g12a_vclk2_venci0.hw,
+ [CLKID_VCLK2_VENCI1] = &g12a_vclk2_venci1.hw,
+ [CLKID_VCLK2_VENCP0] = &g12a_vclk2_vencp0.hw,
+ [CLKID_VCLK2_VENCP1] = &g12a_vclk2_vencp1.hw,
+ [CLKID_VCLK2_VENCT0] = &g12a_vclk2_venct0.hw,
+ [CLKID_VCLK2_VENCT1] = &g12a_vclk2_venct1.hw,
+ [CLKID_VCLK2_OTHER] = &g12a_vclk2_other.hw,
+ [CLKID_VCLK2_ENCI] = &g12a_vclk2_enci.hw,
+ [CLKID_VCLK2_ENCP] = &g12a_vclk2_encp.hw,
+ [CLKID_DAC_CLK] = &g12a_dac_clk.hw,
+ [CLKID_AOCLK] = &g12a_aoclk_gate.hw,
+ [CLKID_IEC958] = &g12a_iec958_gate.hw,
+ [CLKID_ENC480P] = &g12a_enc480p.hw,
+ [CLKID_RNG1] = &g12a_rng1.hw,
+ [CLKID_VCLK2_ENCT] = &g12a_vclk2_enct.hw,
+ [CLKID_VCLK2_ENCL] = &g12a_vclk2_encl.hw,
+ [CLKID_VCLK2_VENCLMMC] = &g12a_vclk2_venclmmc.hw,
+ [CLKID_VCLK2_VENCL] = &g12a_vclk2_vencl.hw,
+ [CLKID_VCLK2_OTHER1] = &g12a_vclk2_other1.hw,
+ [CLKID_FIXED_PLL_DCO] = &g12a_fixed_pll_dco.hw,
+ [CLKID_SYS_PLL_DCO] = &g12a_sys_pll_dco.hw,
+ [CLKID_GP0_PLL_DCO] = &g12a_gp0_pll_dco.hw,
+ [CLKID_HIFI_PLL_DCO] = &g12a_hifi_pll_dco.hw,
+ [CLKID_DMA] = &g12a_dma.hw,
+ [CLKID_EFUSE] = &g12a_efuse.hw,
+ [CLKID_ROM_BOOT] = &g12a_rom_boot.hw,
+ [CLKID_RESET_SEC] = &g12a_reset_sec.hw,
+ [CLKID_SEC_AHB_APB3] = &g12a_sec_ahb_apb3.hw,
+ [CLKID_MPLL_PREDIV] = &g12a_mpll_prediv.hw,
+ [CLKID_VPU_0_SEL] = &g12a_vpu_0_sel.hw,
+ [CLKID_VPU_0_DIV] = &g12a_vpu_0_div.hw,
+ [CLKID_VPU_0] = &g12a_vpu_0.hw,
+ [CLKID_VPU_1_SEL] = &g12a_vpu_1_sel.hw,
+ [CLKID_VPU_1_DIV] = &g12a_vpu_1_div.hw,
+ [CLKID_VPU_1] = &g12a_vpu_1.hw,
+ [CLKID_VPU] = &g12a_vpu.hw,
+ [CLKID_VAPB_0_SEL] = &g12a_vapb_0_sel.hw,
+ [CLKID_VAPB_0_DIV] = &g12a_vapb_0_div.hw,
+ [CLKID_VAPB_0] = &g12a_vapb_0.hw,
+ [CLKID_VAPB_1_SEL] = &g12a_vapb_1_sel.hw,
+ [CLKID_VAPB_1_DIV] = &g12a_vapb_1_div.hw,
+ [CLKID_VAPB_1] = &g12a_vapb_1.hw,
+ [CLKID_VAPB_SEL] = &g12a_vapb_sel.hw,
+ [CLKID_VAPB] = &g12a_vapb.hw,
+ [CLKID_HDMI_PLL_DCO] = &g12a_hdmi_pll_dco.hw,
+ [CLKID_HDMI_PLL_OD] = &g12a_hdmi_pll_od.hw,
+ [CLKID_HDMI_PLL_OD2] = &g12a_hdmi_pll_od2.hw,
+ [CLKID_HDMI_PLL] = &g12a_hdmi_pll.hw,
+ [CLKID_VID_PLL] = &g12a_vid_pll_div.hw,
+ [CLKID_VID_PLL_SEL] = &g12a_vid_pll_sel.hw,
+ [CLKID_VID_PLL_DIV] = &g12a_vid_pll.hw,
+ [CLKID_VCLK_SEL] = &g12a_vclk_sel.hw,
+ [CLKID_VCLK2_SEL] = &g12a_vclk2_sel.hw,
+ [CLKID_VCLK_INPUT] = &g12a_vclk_input.hw,
+ [CLKID_VCLK2_INPUT] = &g12a_vclk2_input.hw,
+ [CLKID_VCLK_DIV] = &g12a_vclk_div.hw,
+ [CLKID_VCLK2_DIV] = &g12a_vclk2_div.hw,
+ [CLKID_VCLK] = &g12a_vclk.hw,
+ [CLKID_VCLK2] = &g12a_vclk2.hw,
+ [CLKID_VCLK_DIV1] = &g12a_vclk_div1.hw,
+ [CLKID_VCLK_DIV2_EN] = &g12a_vclk_div2_en.hw,
+ [CLKID_VCLK_DIV4_EN] = &g12a_vclk_div4_en.hw,
+ [CLKID_VCLK_DIV6_EN] = &g12a_vclk_div6_en.hw,
+ [CLKID_VCLK_DIV12_EN] = &g12a_vclk_div12_en.hw,
+ [CLKID_VCLK2_DIV1] = &g12a_vclk2_div1.hw,
+ [CLKID_VCLK2_DIV2_EN] = &g12a_vclk2_div2_en.hw,
+ [CLKID_VCLK2_DIV4_EN] = &g12a_vclk2_div4_en.hw,
+ [CLKID_VCLK2_DIV6_EN] = &g12a_vclk2_div6_en.hw,
+ [CLKID_VCLK2_DIV12_EN] = &g12a_vclk2_div12_en.hw,
+ [CLKID_VCLK_DIV2] = &g12a_vclk_div2.hw,
+ [CLKID_VCLK_DIV4] = &g12a_vclk_div4.hw,
+ [CLKID_VCLK_DIV6] = &g12a_vclk_div6.hw,
+ [CLKID_VCLK_DIV12] = &g12a_vclk_div12.hw,
+ [CLKID_VCLK2_DIV2] = &g12a_vclk2_div2.hw,
+ [CLKID_VCLK2_DIV4] = &g12a_vclk2_div4.hw,
+ [CLKID_VCLK2_DIV6] = &g12a_vclk2_div6.hw,
+ [CLKID_VCLK2_DIV12] = &g12a_vclk2_div12.hw,
+ [CLKID_CTS_ENCI_SEL] = &g12a_cts_enci_sel.hw,
+ [CLKID_CTS_ENCP_SEL] = &g12a_cts_encp_sel.hw,
+ [CLKID_CTS_VDAC_SEL] = &g12a_cts_vdac_sel.hw,
+ [CLKID_HDMI_TX_SEL] = &g12a_hdmi_tx_sel.hw,
+ [CLKID_CTS_ENCI] = &g12a_cts_enci.hw,
+ [CLKID_CTS_ENCP] = &g12a_cts_encp.hw,
+ [CLKID_CTS_VDAC] = &g12a_cts_vdac.hw,
+ [CLKID_HDMI_TX] = &g12a_hdmi_tx.hw,
+ [CLKID_HDMI_SEL] = &g12a_hdmi_sel.hw,
+ [CLKID_HDMI_DIV] = &g12a_hdmi_div.hw,
+ [CLKID_HDMI] = &g12a_hdmi.hw,
+ [CLKID_MALI_0_SEL] = &g12a_mali_0_sel.hw,
+ [CLKID_MALI_0_DIV] = &g12a_mali_0_div.hw,
+ [CLKID_MALI_0] = &g12a_mali_0.hw,
+ [CLKID_MALI_1_SEL] = &g12a_mali_1_sel.hw,
+ [CLKID_MALI_1_DIV] = &g12a_mali_1_div.hw,
+ [CLKID_MALI_1] = &g12a_mali_1.hw,
+ [CLKID_MALI] = &g12a_mali.hw,
+ [CLKID_MPLL_50M_DIV] = &g12a_mpll_50m_div.hw,
+ [CLKID_MPLL_50M] = &g12a_mpll_50m.hw,
+ [CLKID_SYS_PLL_DIV16_EN] = &g12a_sys_pll_div16_en.hw,
+ [CLKID_SYS_PLL_DIV16] = &g12a_sys_pll_div16.hw,
+ [CLKID_CPU_CLK_DYN0_SEL] = &g12a_cpu_clk_premux0.hw,
+ [CLKID_CPU_CLK_DYN0_DIV] = &g12a_cpu_clk_mux0_div.hw,
+ [CLKID_CPU_CLK_DYN0] = &g12a_cpu_clk_postmux0.hw,
+ [CLKID_CPU_CLK_DYN1_SEL] = &g12a_cpu_clk_premux1.hw,
+ [CLKID_CPU_CLK_DYN1_DIV] = &g12a_cpu_clk_mux1_div.hw,
+ [CLKID_CPU_CLK_DYN1] = &g12a_cpu_clk_postmux1.hw,
+ [CLKID_CPU_CLK_DYN] = &g12a_cpu_clk_dyn.hw,
+ [CLKID_CPU_CLK] = &g12b_cpu_clk.hw,
+ [CLKID_CPU_CLK_DIV16_EN] = &g12a_cpu_clk_div16_en.hw,
+ [CLKID_CPU_CLK_DIV16] = &g12a_cpu_clk_div16.hw,
+ [CLKID_CPU_CLK_APB_DIV] = &g12a_cpu_clk_apb_div.hw,
+ [CLKID_CPU_CLK_APB] = &g12a_cpu_clk_apb.hw,
+ [CLKID_CPU_CLK_ATB_DIV] = &g12a_cpu_clk_atb_div.hw,
+ [CLKID_CPU_CLK_ATB] = &g12a_cpu_clk_atb.hw,
+ [CLKID_CPU_CLK_AXI_DIV] = &g12a_cpu_clk_axi_div.hw,
+ [CLKID_CPU_CLK_AXI] = &g12a_cpu_clk_axi.hw,
+ [CLKID_CPU_CLK_TRACE_DIV] = &g12a_cpu_clk_trace_div.hw,
+ [CLKID_CPU_CLK_TRACE] = &g12a_cpu_clk_trace.hw,
+ [CLKID_PCIE_PLL_DCO] = &g12a_pcie_pll_dco.hw,
+ [CLKID_PCIE_PLL_DCO_DIV2] = &g12a_pcie_pll_dco_div2.hw,
+ [CLKID_PCIE_PLL_OD] = &g12a_pcie_pll_od.hw,
+ [CLKID_PCIE_PLL] = &g12a_pcie_pll.hw,
+ [CLKID_VDEC_1_SEL] = &g12a_vdec_1_sel.hw,
+ [CLKID_VDEC_1_DIV] = &g12a_vdec_1_div.hw,
+ [CLKID_VDEC_1] = &g12a_vdec_1.hw,
+ [CLKID_VDEC_HEVC_SEL] = &g12a_vdec_hevc_sel.hw,
+ [CLKID_VDEC_HEVC_DIV] = &g12a_vdec_hevc_div.hw,
+ [CLKID_VDEC_HEVC] = &g12a_vdec_hevc.hw,
+ [CLKID_VDEC_HEVCF_SEL] = &g12a_vdec_hevcf_sel.hw,
+ [CLKID_VDEC_HEVCF_DIV] = &g12a_vdec_hevcf_div.hw,
+ [CLKID_VDEC_HEVCF] = &g12a_vdec_hevcf.hw,
+ [CLKID_TS_DIV] = &g12a_ts_div.hw,
+ [CLKID_TS] = &g12a_ts.hw,
+ [CLKID_SYS1_PLL_DCO] = &g12b_sys1_pll_dco.hw,
+ [CLKID_SYS1_PLL] = &g12b_sys1_pll.hw,
+ [CLKID_SYS1_PLL_DIV16_EN] = &g12b_sys1_pll_div16_en.hw,
+ [CLKID_SYS1_PLL_DIV16] = &g12b_sys1_pll_div16.hw,
+ [CLKID_CPUB_CLK_DYN0_SEL] = &g12b_cpub_clk_premux0.hw,
+ [CLKID_CPUB_CLK_DYN0_DIV] = &g12b_cpub_clk_mux0_div.hw,
+ [CLKID_CPUB_CLK_DYN0] = &g12b_cpub_clk_postmux0.hw,
+ [CLKID_CPUB_CLK_DYN1_SEL] = &g12b_cpub_clk_premux1.hw,
+ [CLKID_CPUB_CLK_DYN1_DIV] = &g12b_cpub_clk_mux1_div.hw,
+ [CLKID_CPUB_CLK_DYN1] = &g12b_cpub_clk_postmux1.hw,
+ [CLKID_CPUB_CLK_DYN] = &g12b_cpub_clk_dyn.hw,
+ [CLKID_CPUB_CLK] = &g12b_cpub_clk.hw,
+ [CLKID_CPUB_CLK_DIV16_EN] = &g12b_cpub_clk_div16_en.hw,
+ [CLKID_CPUB_CLK_DIV16] = &g12b_cpub_clk_div16.hw,
+ [CLKID_CPUB_CLK_DIV2] = &g12b_cpub_clk_div2.hw,
+ [CLKID_CPUB_CLK_DIV3] = &g12b_cpub_clk_div3.hw,
+ [CLKID_CPUB_CLK_DIV4] = &g12b_cpub_clk_div4.hw,
+ [CLKID_CPUB_CLK_DIV5] = &g12b_cpub_clk_div5.hw,
+ [CLKID_CPUB_CLK_DIV6] = &g12b_cpub_clk_div6.hw,
+ [CLKID_CPUB_CLK_DIV7] = &g12b_cpub_clk_div7.hw,
+ [CLKID_CPUB_CLK_DIV8] = &g12b_cpub_clk_div8.hw,
+ [CLKID_CPUB_CLK_APB_SEL] = &g12b_cpub_clk_apb_sel.hw,
+ [CLKID_CPUB_CLK_APB] = &g12b_cpub_clk_apb.hw,
+ [CLKID_CPUB_CLK_ATB_SEL] = &g12b_cpub_clk_atb_sel.hw,
+ [CLKID_CPUB_CLK_ATB] = &g12b_cpub_clk_atb.hw,
+ [CLKID_CPUB_CLK_AXI_SEL] = &g12b_cpub_clk_axi_sel.hw,
+ [CLKID_CPUB_CLK_AXI] = &g12b_cpub_clk_axi.hw,
+ [CLKID_CPUB_CLK_TRACE_SEL] = &g12b_cpub_clk_trace_sel.hw,
+ [CLKID_CPUB_CLK_TRACE] = &g12b_cpub_clk_trace.hw,
+ [NR_CLKS] = NULL,
+ },
+ .num = NR_CLKS,
+};
+
/* Convenience table to populate regmap in .probe */
static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12a_clk81,
@@ -3021,6 +3755,27 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12a_vdec_hevcf,
&g12a_ts_div,
&g12a_ts,
+ &g12b_cpu_clk,
+ &g12b_sys1_pll_dco,
+ &g12b_sys1_pll,
+ &g12b_sys1_pll_div16_en,
+ &g12b_cpub_clk_premux0,
+ &g12b_cpub_clk_mux0_div,
+ &g12b_cpub_clk_postmux0,
+ &g12b_cpub_clk_premux1,
+ &g12b_cpub_clk_mux1_div,
+ &g12b_cpub_clk_postmux1,
+ &g12b_cpub_clk_dyn,
+ &g12b_cpub_clk,
+ &g12b_cpub_clk_div16_en,
+ &g12b_cpub_clk_apb_sel,
+ &g12b_cpub_clk_apb,
+ &g12b_cpub_clk_atb_sel,
+ &g12b_cpub_clk_atb,
+ &g12b_cpub_clk_axi_sel,
+ &g12b_cpub_clk_axi,
+ &g12b_cpub_clk_trace_sel,
+ &g12b_cpub_clk_trace,
};
static const struct reg_sequence g12a_init_regs[] = {
@@ -3035,8 +3790,15 @@ static const struct meson_eeclkc_data g12a_clkc_data = {
.init_count = ARRAY_SIZE(g12a_init_regs),
};
+static const struct meson_eeclkc_data g12b_clkc_data = {
+ .regmap_clks = g12a_clk_regmaps,
+ .regmap_clk_num = ARRAY_SIZE(g12a_clk_regmaps),
+ .hw_onecell_data = &g12b_hw_onecell_data
+};
+
static const struct of_device_id clkc_match_table[] = {
{ .compatible = "amlogic,g12a-clkc", .data = &g12a_clkc_data },
+ { .compatible = "amlogic,g12b-clkc", .data = &g12b_clkc_data },
{}
};
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index bda1501ba671..c8aed31fbe17 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -69,6 +69,8 @@
#define HHI_VDEC4_CLK_CNTL 0x1EC
#define HHI_HDCP22_CLK_CNTL 0x1F0
#define HHI_VAPBCLK_CNTL 0x1F4
+#define HHI_SYS_CPUB_CLK_CNTL1 0x200
+#define HHI_SYS_CPUB_CLK_CNTL 0x208
#define HHI_VPU_CLKB_CNTL 0x20C
#define HHI_GEN_CLK_CNTL 0x228
#define HHI_VDIN_MEAS_CLK_CNTL 0x250
@@ -102,6 +104,13 @@
#define HHI_HDMI_PLL_CNTL5 0x334
#define HHI_HDMI_PLL_CNTL6 0x338
#define HHI_SPICC_CLK_CNTL 0x3dc
+#define HHI_SYS1_PLL_CNTL0 0x380
+#define HHI_SYS1_PLL_CNTL1 0x384
+#define HHI_SYS1_PLL_CNTL2 0x388
+#define HHI_SYS1_PLL_CNTL3 0x38c
+#define HHI_SYS1_PLL_CNTL4 0x390
+#define HHI_SYS1_PLL_CNTL5 0x394
+#define HHI_SYS1_PLL_CNTL6 0x398
/*
* CLKID index values
@@ -196,8 +205,37 @@
#define CLKID_VDEC_HEVCF_SEL 208
#define CLKID_VDEC_HEVCF_DIV 209
#define CLKID_TS_DIV 211
+#define CLKID_SYS1_PLL_DCO 213
+#define CLKID_SYS1_PLL 214
+#define CLKID_SYS1_PLL_DIV16_EN 215
+#define CLKID_SYS1_PLL_DIV16 216
+#define CLKID_CPUB_CLK_DYN0_SEL 217
+#define CLKID_CPUB_CLK_DYN0_DIV 218
+#define CLKID_CPUB_CLK_DYN0 219
+#define CLKID_CPUB_CLK_DYN1_SEL 220
+#define CLKID_CPUB_CLK_DYN1_DIV 221
+#define CLKID_CPUB_CLK_DYN1 222
+#define CLKID_CPUB_CLK_DYN 223
+#define CLKID_CPUB_CLK 224
+#define CLKID_CPUB_CLK_DIV16_EN 225
+#define CLKID_CPUB_CLK_DIV16 226
+#define CLKID_CPUB_CLK_DIV2 227
+#define CLKID_CPUB_CLK_DIV3 228
+#define CLKID_CPUB_CLK_DIV4 229
+#define CLKID_CPUB_CLK_DIV5 230
+#define CLKID_CPUB_CLK_DIV6 231
+#define CLKID_CPUB_CLK_DIV7 232
+#define CLKID_CPUB_CLK_DIV8 233
+#define CLKID_CPUB_CLK_APB_SEL 234
+#define CLKID_CPUB_CLK_APB 235
+#define CLKID_CPUB_CLK_ATB_SEL 236
+#define CLKID_CPUB_CLK_ATB 237
+#define CLKID_CPUB_CLK_AXI_SEL 238
+#define CLKID_CPUB_CLK_AXI 239
+#define CLKID_CPUB_CLK_TRACE_SEL 240
+#define CLKID_CPUB_CLK_TRACE 241
-#define NR_CLKS 213
+#define NR_CLKS 242
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/g12a-clkc.h>
--
2.21.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 2/3] clk: meson: g12a: Add support for G12B CPUB clocks
@ 2019-05-28 8:07 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-28 8:07 UTC (permalink / raw)
To: jbrunet
Cc: linux-amlogic, linux-clk, linux-kernel, linux-arm-kernel, Neil Armstrong
Update the Meson G12A Clock driver to support the Amlogic G12B SoC.
G12B clock driver is very close, the main differences are :
- the clock tree is duplicated for the both clusters, and the
SYS_PLL are swapped between the clusters
- G12B has additional clocks like for CSI an other components
Here only the cpu clock tree is handled.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/g12a.c | 762 +++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/g12a.h | 40 +-
2 files changed, 801 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index a7b621bebb7e..1abe46a95dc1 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -150,6 +150,57 @@ static struct clk_regmap g12a_sys_pll = {
},
};
+static struct clk_regmap g12b_sys1_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .l = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 29,
+ .width = 1,
+ },
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sys1_pll_dco",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12b_sys1_pll = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS1_PLL_CNTL0,
+ .shift = 16,
+ .width = 3,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sys1_pll",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "sys1_pll_dco" },
+ .num_parents = 1,
+ },
+};
+
static struct clk_regmap g12a_sys_pll_div16_en = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_SYS_CPU_CLK_CNTL1,
@@ -167,6 +218,23 @@ static struct clk_regmap g12a_sys_pll_div16_en = {
},
};
+static struct clk_regmap g12b_sys1_pll_div16_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sys1_pll_div16_en",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "sys1_pll" },
+ .num_parents = 1,
+ /*
+ * This clock is used to debug the sys_pll range
+ * Linux should not change it at runtime
+ */
+ },
+};
+
static struct clk_fixed_factor g12a_sys_pll_div16 = {
.mult = 1,
.div = 16,
@@ -178,6 +246,17 @@ static struct clk_fixed_factor g12a_sys_pll_div16 = {
},
};
+static struct clk_fixed_factor g12b_sys1_pll_div16 = {
+ .mult = 1,
+ .div = 16,
+ .hw.init = &(struct clk_init_data){
+ .name = "sys1_pll_div16",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "sys1_pll_div16_en" },
+ .num_parents = 1,
+ },
+};
+
/* Datasheet names this field as "premux0" */
static struct clk_regmap g12a_cpu_clk_premux0 = {
.data = &(struct clk_regmap_mux_data){
@@ -306,6 +385,150 @@ static struct clk_regmap g12a_cpu_clk = {
},
};
+/* Datasheet names this field as "Final_mux_sel" */
+static struct clk_regmap g12b_cpu_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL0,
+ .mask = 0x1,
+ .shift = 11,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpu_clk_dyn",
+ "sys1_pll" },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "premux0" */
+static struct clk_regmap g12b_cpub_clk_premux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x3,
+ .shift = 0,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn0_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal",
+ "fclk_div2",
+ "fclk_div3" },
+ .num_parents = 3,
+ },
+};
+
+/* Datasheet names this field as "mux0_divn_tcnt" */
+static struct clk_regmap g12b_cpub_clk_mux0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .shift = 4,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn0_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn0_sel" },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux0" */
+static struct clk_regmap g12b_cpub_clk_postmux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x1,
+ .shift = 2,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn0",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn0_sel",
+ "cpub_clk_dyn0_div" },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "premux1" */
+static struct clk_regmap g12b_cpub_clk_premux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x3,
+ .shift = 16,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn1_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal",
+ "fclk_div2",
+ "fclk_div3" },
+ .num_parents = 3,
+ },
+};
+
+/* Datasheet names this field as "Mux1_divn_tcnt" */
+static struct clk_regmap g12b_cpub_clk_mux1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .shift = 20,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn1_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn1_sel" },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux1" */
+static struct clk_regmap g12b_cpub_clk_postmux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x1,
+ .shift = 18,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn1",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn1_sel",
+ "cpub_clk_dyn1_div" },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_dyn_mux_sel" */
+static struct clk_regmap g12b_cpub_clk_dyn = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x1,
+ .shift = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn0",
+ "cpub_clk_dyn1" },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_mux_sel" */
+static struct clk_regmap g12b_cpub_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x1,
+ .shift = 11,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn",
+ "sys_pll" },
+ .num_parents = 2,
+ },
+};
+
static struct clk_regmap g12a_cpu_clk_div16_en = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_SYS_CPU_CLK_CNTL1,
@@ -323,6 +546,23 @@ static struct clk_regmap g12a_cpu_clk_div16_en = {
},
};
+static struct clk_regmap g12b_cpub_clk_div16_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_div16_en",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ /*
+ * This clock is used to debug the cpu_clk range
+ * Linux should not change it at runtime
+ */
+ },
+};
+
static struct clk_fixed_factor g12a_cpu_clk_div16 = {
.mult = 1,
.div = 16,
@@ -334,6 +574,17 @@ static struct clk_fixed_factor g12a_cpu_clk_div16 = {
},
};
+static struct clk_fixed_factor g12b_cpub_clk_div16 = {
+ .mult = 1,
+ .div = 16,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div16",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div16_en" },
+ .num_parents = 1,
+ },
+};
+
static struct clk_regmap g12a_cpu_clk_apb_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_SYS_CPU_CLK_CNTL1,
@@ -462,6 +713,240 @@ static struct clk_regmap g12a_cpu_clk_trace = {
},
};
+static struct clk_fixed_factor g12b_cpub_clk_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div2",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div3 = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div3",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div4 = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div4",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div5 = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div5",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div6 = {
+ .mult = 1,
+ .div = 6,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div6",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div7 = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div7",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div8 = {
+ .mult = 1,
+ .div = 8,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div8",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static u32 mux_table_cpub[] = { 1, 2, 3, 4, 5, 6, 7 };
+static struct clk_regmap g12b_cpub_clk_apb_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .mask = 7,
+ .shift = 3,
+ .table = mux_table_cpub,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_apb_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div2",
+ "cpub_clk_div3",
+ "cpub_clk_div4",
+ "cpub_clk_div5",
+ "cpub_clk_div6",
+ "cpub_clk_div7",
+ "cpub_clk_div8" },
+ .num_parents = 7,
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_apb = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 16,
+ .flags = CLK_GATE_SET_TO_DISABLE,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_apb",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_apb_sel" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_atb_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .mask = 7,
+ .shift = 6,
+ .table = mux_table_cpub,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_atb_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div2",
+ "cpub_clk_div3",
+ "cpub_clk_div4",
+ "cpub_clk_div5",
+ "cpub_clk_div6",
+ "cpub_clk_div7",
+ "cpub_clk_div8" },
+ .num_parents = 7,
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_atb = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 17,
+ .flags = CLK_GATE_SET_TO_DISABLE,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_atb",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_atb_sel" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_axi_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .mask = 7,
+ .shift = 9,
+ .table = mux_table_cpub,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_axi_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div2",
+ "cpub_clk_div3",
+ "cpub_clk_div4",
+ "cpub_clk_div5",
+ "cpub_clk_div6",
+ "cpub_clk_div7",
+ "cpub_clk_div8" },
+ .num_parents = 7,
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_axi = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 18,
+ .flags = CLK_GATE_SET_TO_DISABLE,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_axi",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_axi_sel" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_trace_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .mask = 7,
+ .shift = 20,
+ .table = mux_table_cpub,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_trace_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div2",
+ "cpub_clk_div3",
+ "cpub_clk_div4",
+ "cpub_clk_div5",
+ "cpub_clk_div6",
+ "cpub_clk_div7",
+ "cpub_clk_div8" },
+ .num_parents = 7,
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_trace = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 23,
+ .flags = CLK_GATE_SET_TO_DISABLE,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_trace",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_trace_sel" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ },
+};
+
static const struct pll_mult_range g12a_gp0_pll_mult_range = {
.min = 125,
.max = 255,
@@ -2827,6 +3312,255 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
.num = NR_CLKS,
};
+static struct clk_hw_onecell_data g12b_hw_onecell_data = {
+ .hws = {
+ [CLKID_SYS_PLL] = &g12a_sys_pll.hw,
+ [CLKID_FIXED_PLL] = &g12a_fixed_pll.hw,
+ [CLKID_FCLK_DIV2] = &g12a_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &g12a_fclk_div3.hw,
+ [CLKID_FCLK_DIV4] = &g12a_fclk_div4.hw,
+ [CLKID_FCLK_DIV5] = &g12a_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &g12a_fclk_div7.hw,
+ [CLKID_FCLK_DIV2P5] = &g12a_fclk_div2p5.hw,
+ [CLKID_GP0_PLL] = &g12a_gp0_pll.hw,
+ [CLKID_MPEG_SEL] = &g12a_mpeg_clk_sel.hw,
+ [CLKID_MPEG_DIV] = &g12a_mpeg_clk_div.hw,
+ [CLKID_CLK81] = &g12a_clk81.hw,
+ [CLKID_MPLL0] = &g12a_mpll0.hw,
+ [CLKID_MPLL1] = &g12a_mpll1.hw,
+ [CLKID_MPLL2] = &g12a_mpll2.hw,
+ [CLKID_MPLL3] = &g12a_mpll3.hw,
+ [CLKID_DDR] = &g12a_ddr.hw,
+ [CLKID_DOS] = &g12a_dos.hw,
+ [CLKID_AUDIO_LOCKER] = &g12a_audio_locker.hw,
+ [CLKID_MIPI_DSI_HOST] = &g12a_mipi_dsi_host.hw,
+ [CLKID_ETH_PHY] = &g12a_eth_phy.hw,
+ [CLKID_ISA] = &g12a_isa.hw,
+ [CLKID_PL301] = &g12a_pl301.hw,
+ [CLKID_PERIPHS] = &g12a_periphs.hw,
+ [CLKID_SPICC0] = &g12a_spicc_0.hw,
+ [CLKID_I2C] = &g12a_i2c.hw,
+ [CLKID_SANA] = &g12a_sana.hw,
+ [CLKID_SD] = &g12a_sd.hw,
+ [CLKID_RNG0] = &g12a_rng0.hw,
+ [CLKID_UART0] = &g12a_uart0.hw,
+ [CLKID_SPICC1] = &g12a_spicc_1.hw,
+ [CLKID_HIU_IFACE] = &g12a_hiu_reg.hw,
+ [CLKID_MIPI_DSI_PHY] = &g12a_mipi_dsi_phy.hw,
+ [CLKID_ASSIST_MISC] = &g12a_assist_misc.hw,
+ [CLKID_SD_EMMC_A] = &g12a_emmc_a.hw,
+ [CLKID_SD_EMMC_B] = &g12a_emmc_b.hw,
+ [CLKID_SD_EMMC_C] = &g12a_emmc_c.hw,
+ [CLKID_AUDIO_CODEC] = &g12a_audio_codec.hw,
+ [CLKID_AUDIO] = &g12a_audio.hw,
+ [CLKID_ETH] = &g12a_eth_core.hw,
+ [CLKID_DEMUX] = &g12a_demux.hw,
+ [CLKID_AUDIO_IFIFO] = &g12a_audio_ififo.hw,
+ [CLKID_ADC] = &g12a_adc.hw,
+ [CLKID_UART1] = &g12a_uart1.hw,
+ [CLKID_G2D] = &g12a_g2d.hw,
+ [CLKID_RESET] = &g12a_reset.hw,
+ [CLKID_PCIE_COMB] = &g12a_pcie_comb.hw,
+ [CLKID_PARSER] = &g12a_parser.hw,
+ [CLKID_USB] = &g12a_usb_general.hw,
+ [CLKID_PCIE_PHY] = &g12a_pcie_phy.hw,
+ [CLKID_AHB_ARB0] = &g12a_ahb_arb0.hw,
+ [CLKID_AHB_DATA_BUS] = &g12a_ahb_data_bus.hw,
+ [CLKID_AHB_CTRL_BUS] = &g12a_ahb_ctrl_bus.hw,
+ [CLKID_HTX_HDCP22] = &g12a_htx_hdcp22.hw,
+ [CLKID_HTX_PCLK] = &g12a_htx_pclk.hw,
+ [CLKID_BT656] = &g12a_bt656.hw,
+ [CLKID_USB1_DDR_BRIDGE] = &g12a_usb1_to_ddr.hw,
+ [CLKID_MMC_PCLK] = &g12a_mmc_pclk.hw,
+ [CLKID_UART2] = &g12a_uart2.hw,
+ [CLKID_VPU_INTR] = &g12a_vpu_intr.hw,
+ [CLKID_GIC] = &g12a_gic.hw,
+ [CLKID_SD_EMMC_A_CLK0_SEL] = &g12a_sd_emmc_a_clk0_sel.hw,
+ [CLKID_SD_EMMC_A_CLK0_DIV] = &g12a_sd_emmc_a_clk0_div.hw,
+ [CLKID_SD_EMMC_A_CLK0] = &g12a_sd_emmc_a_clk0.hw,
+ [CLKID_SD_EMMC_B_CLK0_SEL] = &g12a_sd_emmc_b_clk0_sel.hw,
+ [CLKID_SD_EMMC_B_CLK0_DIV] = &g12a_sd_emmc_b_clk0_div.hw,
+ [CLKID_SD_EMMC_B_CLK0] = &g12a_sd_emmc_b_clk0.hw,
+ [CLKID_SD_EMMC_C_CLK0_SEL] = &g12a_sd_emmc_c_clk0_sel.hw,
+ [CLKID_SD_EMMC_C_CLK0_DIV] = &g12a_sd_emmc_c_clk0_div.hw,
+ [CLKID_SD_EMMC_C_CLK0] = &g12a_sd_emmc_c_clk0.hw,
+ [CLKID_MPLL0_DIV] = &g12a_mpll0_div.hw,
+ [CLKID_MPLL1_DIV] = &g12a_mpll1_div.hw,
+ [CLKID_MPLL2_DIV] = &g12a_mpll2_div.hw,
+ [CLKID_MPLL3_DIV] = &g12a_mpll3_div.hw,
+ [CLKID_FCLK_DIV2_DIV] = &g12a_fclk_div2_div.hw,
+ [CLKID_FCLK_DIV3_DIV] = &g12a_fclk_div3_div.hw,
+ [CLKID_FCLK_DIV4_DIV] = &g12a_fclk_div4_div.hw,
+ [CLKID_FCLK_DIV5_DIV] = &g12a_fclk_div5_div.hw,
+ [CLKID_FCLK_DIV7_DIV] = &g12a_fclk_div7_div.hw,
+ [CLKID_FCLK_DIV2P5_DIV] = &g12a_fclk_div2p5_div.hw,
+ [CLKID_HIFI_PLL] = &g12a_hifi_pll.hw,
+ [CLKID_VCLK2_VENCI0] = &g12a_vclk2_venci0.hw,
+ [CLKID_VCLK2_VENCI1] = &g12a_vclk2_venci1.hw,
+ [CLKID_VCLK2_VENCP0] = &g12a_vclk2_vencp0.hw,
+ [CLKID_VCLK2_VENCP1] = &g12a_vclk2_vencp1.hw,
+ [CLKID_VCLK2_VENCT0] = &g12a_vclk2_venct0.hw,
+ [CLKID_VCLK2_VENCT1] = &g12a_vclk2_venct1.hw,
+ [CLKID_VCLK2_OTHER] = &g12a_vclk2_other.hw,
+ [CLKID_VCLK2_ENCI] = &g12a_vclk2_enci.hw,
+ [CLKID_VCLK2_ENCP] = &g12a_vclk2_encp.hw,
+ [CLKID_DAC_CLK] = &g12a_dac_clk.hw,
+ [CLKID_AOCLK] = &g12a_aoclk_gate.hw,
+ [CLKID_IEC958] = &g12a_iec958_gate.hw,
+ [CLKID_ENC480P] = &g12a_enc480p.hw,
+ [CLKID_RNG1] = &g12a_rng1.hw,
+ [CLKID_VCLK2_ENCT] = &g12a_vclk2_enct.hw,
+ [CLKID_VCLK2_ENCL] = &g12a_vclk2_encl.hw,
+ [CLKID_VCLK2_VENCLMMC] = &g12a_vclk2_venclmmc.hw,
+ [CLKID_VCLK2_VENCL] = &g12a_vclk2_vencl.hw,
+ [CLKID_VCLK2_OTHER1] = &g12a_vclk2_other1.hw,
+ [CLKID_FIXED_PLL_DCO] = &g12a_fixed_pll_dco.hw,
+ [CLKID_SYS_PLL_DCO] = &g12a_sys_pll_dco.hw,
+ [CLKID_GP0_PLL_DCO] = &g12a_gp0_pll_dco.hw,
+ [CLKID_HIFI_PLL_DCO] = &g12a_hifi_pll_dco.hw,
+ [CLKID_DMA] = &g12a_dma.hw,
+ [CLKID_EFUSE] = &g12a_efuse.hw,
+ [CLKID_ROM_BOOT] = &g12a_rom_boot.hw,
+ [CLKID_RESET_SEC] = &g12a_reset_sec.hw,
+ [CLKID_SEC_AHB_APB3] = &g12a_sec_ahb_apb3.hw,
+ [CLKID_MPLL_PREDIV] = &g12a_mpll_prediv.hw,
+ [CLKID_VPU_0_SEL] = &g12a_vpu_0_sel.hw,
+ [CLKID_VPU_0_DIV] = &g12a_vpu_0_div.hw,
+ [CLKID_VPU_0] = &g12a_vpu_0.hw,
+ [CLKID_VPU_1_SEL] = &g12a_vpu_1_sel.hw,
+ [CLKID_VPU_1_DIV] = &g12a_vpu_1_div.hw,
+ [CLKID_VPU_1] = &g12a_vpu_1.hw,
+ [CLKID_VPU] = &g12a_vpu.hw,
+ [CLKID_VAPB_0_SEL] = &g12a_vapb_0_sel.hw,
+ [CLKID_VAPB_0_DIV] = &g12a_vapb_0_div.hw,
+ [CLKID_VAPB_0] = &g12a_vapb_0.hw,
+ [CLKID_VAPB_1_SEL] = &g12a_vapb_1_sel.hw,
+ [CLKID_VAPB_1_DIV] = &g12a_vapb_1_div.hw,
+ [CLKID_VAPB_1] = &g12a_vapb_1.hw,
+ [CLKID_VAPB_SEL] = &g12a_vapb_sel.hw,
+ [CLKID_VAPB] = &g12a_vapb.hw,
+ [CLKID_HDMI_PLL_DCO] = &g12a_hdmi_pll_dco.hw,
+ [CLKID_HDMI_PLL_OD] = &g12a_hdmi_pll_od.hw,
+ [CLKID_HDMI_PLL_OD2] = &g12a_hdmi_pll_od2.hw,
+ [CLKID_HDMI_PLL] = &g12a_hdmi_pll.hw,
+ [CLKID_VID_PLL] = &g12a_vid_pll_div.hw,
+ [CLKID_VID_PLL_SEL] = &g12a_vid_pll_sel.hw,
+ [CLKID_VID_PLL_DIV] = &g12a_vid_pll.hw,
+ [CLKID_VCLK_SEL] = &g12a_vclk_sel.hw,
+ [CLKID_VCLK2_SEL] = &g12a_vclk2_sel.hw,
+ [CLKID_VCLK_INPUT] = &g12a_vclk_input.hw,
+ [CLKID_VCLK2_INPUT] = &g12a_vclk2_input.hw,
+ [CLKID_VCLK_DIV] = &g12a_vclk_div.hw,
+ [CLKID_VCLK2_DIV] = &g12a_vclk2_div.hw,
+ [CLKID_VCLK] = &g12a_vclk.hw,
+ [CLKID_VCLK2] = &g12a_vclk2.hw,
+ [CLKID_VCLK_DIV1] = &g12a_vclk_div1.hw,
+ [CLKID_VCLK_DIV2_EN] = &g12a_vclk_div2_en.hw,
+ [CLKID_VCLK_DIV4_EN] = &g12a_vclk_div4_en.hw,
+ [CLKID_VCLK_DIV6_EN] = &g12a_vclk_div6_en.hw,
+ [CLKID_VCLK_DIV12_EN] = &g12a_vclk_div12_en.hw,
+ [CLKID_VCLK2_DIV1] = &g12a_vclk2_div1.hw,
+ [CLKID_VCLK2_DIV2_EN] = &g12a_vclk2_div2_en.hw,
+ [CLKID_VCLK2_DIV4_EN] = &g12a_vclk2_div4_en.hw,
+ [CLKID_VCLK2_DIV6_EN] = &g12a_vclk2_div6_en.hw,
+ [CLKID_VCLK2_DIV12_EN] = &g12a_vclk2_div12_en.hw,
+ [CLKID_VCLK_DIV2] = &g12a_vclk_div2.hw,
+ [CLKID_VCLK_DIV4] = &g12a_vclk_div4.hw,
+ [CLKID_VCLK_DIV6] = &g12a_vclk_div6.hw,
+ [CLKID_VCLK_DIV12] = &g12a_vclk_div12.hw,
+ [CLKID_VCLK2_DIV2] = &g12a_vclk2_div2.hw,
+ [CLKID_VCLK2_DIV4] = &g12a_vclk2_div4.hw,
+ [CLKID_VCLK2_DIV6] = &g12a_vclk2_div6.hw,
+ [CLKID_VCLK2_DIV12] = &g12a_vclk2_div12.hw,
+ [CLKID_CTS_ENCI_SEL] = &g12a_cts_enci_sel.hw,
+ [CLKID_CTS_ENCP_SEL] = &g12a_cts_encp_sel.hw,
+ [CLKID_CTS_VDAC_SEL] = &g12a_cts_vdac_sel.hw,
+ [CLKID_HDMI_TX_SEL] = &g12a_hdmi_tx_sel.hw,
+ [CLKID_CTS_ENCI] = &g12a_cts_enci.hw,
+ [CLKID_CTS_ENCP] = &g12a_cts_encp.hw,
+ [CLKID_CTS_VDAC] = &g12a_cts_vdac.hw,
+ [CLKID_HDMI_TX] = &g12a_hdmi_tx.hw,
+ [CLKID_HDMI_SEL] = &g12a_hdmi_sel.hw,
+ [CLKID_HDMI_DIV] = &g12a_hdmi_div.hw,
+ [CLKID_HDMI] = &g12a_hdmi.hw,
+ [CLKID_MALI_0_SEL] = &g12a_mali_0_sel.hw,
+ [CLKID_MALI_0_DIV] = &g12a_mali_0_div.hw,
+ [CLKID_MALI_0] = &g12a_mali_0.hw,
+ [CLKID_MALI_1_SEL] = &g12a_mali_1_sel.hw,
+ [CLKID_MALI_1_DIV] = &g12a_mali_1_div.hw,
+ [CLKID_MALI_1] = &g12a_mali_1.hw,
+ [CLKID_MALI] = &g12a_mali.hw,
+ [CLKID_MPLL_50M_DIV] = &g12a_mpll_50m_div.hw,
+ [CLKID_MPLL_50M] = &g12a_mpll_50m.hw,
+ [CLKID_SYS_PLL_DIV16_EN] = &g12a_sys_pll_div16_en.hw,
+ [CLKID_SYS_PLL_DIV16] = &g12a_sys_pll_div16.hw,
+ [CLKID_CPU_CLK_DYN0_SEL] = &g12a_cpu_clk_premux0.hw,
+ [CLKID_CPU_CLK_DYN0_DIV] = &g12a_cpu_clk_mux0_div.hw,
+ [CLKID_CPU_CLK_DYN0] = &g12a_cpu_clk_postmux0.hw,
+ [CLKID_CPU_CLK_DYN1_SEL] = &g12a_cpu_clk_premux1.hw,
+ [CLKID_CPU_CLK_DYN1_DIV] = &g12a_cpu_clk_mux1_div.hw,
+ [CLKID_CPU_CLK_DYN1] = &g12a_cpu_clk_postmux1.hw,
+ [CLKID_CPU_CLK_DYN] = &g12a_cpu_clk_dyn.hw,
+ [CLKID_CPU_CLK] = &g12b_cpu_clk.hw,
+ [CLKID_CPU_CLK_DIV16_EN] = &g12a_cpu_clk_div16_en.hw,
+ [CLKID_CPU_CLK_DIV16] = &g12a_cpu_clk_div16.hw,
+ [CLKID_CPU_CLK_APB_DIV] = &g12a_cpu_clk_apb_div.hw,
+ [CLKID_CPU_CLK_APB] = &g12a_cpu_clk_apb.hw,
+ [CLKID_CPU_CLK_ATB_DIV] = &g12a_cpu_clk_atb_div.hw,
+ [CLKID_CPU_CLK_ATB] = &g12a_cpu_clk_atb.hw,
+ [CLKID_CPU_CLK_AXI_DIV] = &g12a_cpu_clk_axi_div.hw,
+ [CLKID_CPU_CLK_AXI] = &g12a_cpu_clk_axi.hw,
+ [CLKID_CPU_CLK_TRACE_DIV] = &g12a_cpu_clk_trace_div.hw,
+ [CLKID_CPU_CLK_TRACE] = &g12a_cpu_clk_trace.hw,
+ [CLKID_PCIE_PLL_DCO] = &g12a_pcie_pll_dco.hw,
+ [CLKID_PCIE_PLL_DCO_DIV2] = &g12a_pcie_pll_dco_div2.hw,
+ [CLKID_PCIE_PLL_OD] = &g12a_pcie_pll_od.hw,
+ [CLKID_PCIE_PLL] = &g12a_pcie_pll.hw,
+ [CLKID_VDEC_1_SEL] = &g12a_vdec_1_sel.hw,
+ [CLKID_VDEC_1_DIV] = &g12a_vdec_1_div.hw,
+ [CLKID_VDEC_1] = &g12a_vdec_1.hw,
+ [CLKID_VDEC_HEVC_SEL] = &g12a_vdec_hevc_sel.hw,
+ [CLKID_VDEC_HEVC_DIV] = &g12a_vdec_hevc_div.hw,
+ [CLKID_VDEC_HEVC] = &g12a_vdec_hevc.hw,
+ [CLKID_VDEC_HEVCF_SEL] = &g12a_vdec_hevcf_sel.hw,
+ [CLKID_VDEC_HEVCF_DIV] = &g12a_vdec_hevcf_div.hw,
+ [CLKID_VDEC_HEVCF] = &g12a_vdec_hevcf.hw,
+ [CLKID_TS_DIV] = &g12a_ts_div.hw,
+ [CLKID_TS] = &g12a_ts.hw,
+ [CLKID_SYS1_PLL_DCO] = &g12b_sys1_pll_dco.hw,
+ [CLKID_SYS1_PLL] = &g12b_sys1_pll.hw,
+ [CLKID_SYS1_PLL_DIV16_EN] = &g12b_sys1_pll_div16_en.hw,
+ [CLKID_SYS1_PLL_DIV16] = &g12b_sys1_pll_div16.hw,
+ [CLKID_CPUB_CLK_DYN0_SEL] = &g12b_cpub_clk_premux0.hw,
+ [CLKID_CPUB_CLK_DYN0_DIV] = &g12b_cpub_clk_mux0_div.hw,
+ [CLKID_CPUB_CLK_DYN0] = &g12b_cpub_clk_postmux0.hw,
+ [CLKID_CPUB_CLK_DYN1_SEL] = &g12b_cpub_clk_premux1.hw,
+ [CLKID_CPUB_CLK_DYN1_DIV] = &g12b_cpub_clk_mux1_div.hw,
+ [CLKID_CPUB_CLK_DYN1] = &g12b_cpub_clk_postmux1.hw,
+ [CLKID_CPUB_CLK_DYN] = &g12b_cpub_clk_dyn.hw,
+ [CLKID_CPUB_CLK] = &g12b_cpub_clk.hw,
+ [CLKID_CPUB_CLK_DIV16_EN] = &g12b_cpub_clk_div16_en.hw,
+ [CLKID_CPUB_CLK_DIV16] = &g12b_cpub_clk_div16.hw,
+ [CLKID_CPUB_CLK_DIV2] = &g12b_cpub_clk_div2.hw,
+ [CLKID_CPUB_CLK_DIV3] = &g12b_cpub_clk_div3.hw,
+ [CLKID_CPUB_CLK_DIV4] = &g12b_cpub_clk_div4.hw,
+ [CLKID_CPUB_CLK_DIV5] = &g12b_cpub_clk_div5.hw,
+ [CLKID_CPUB_CLK_DIV6] = &g12b_cpub_clk_div6.hw,
+ [CLKID_CPUB_CLK_DIV7] = &g12b_cpub_clk_div7.hw,
+ [CLKID_CPUB_CLK_DIV8] = &g12b_cpub_clk_div8.hw,
+ [CLKID_CPUB_CLK_APB_SEL] = &g12b_cpub_clk_apb_sel.hw,
+ [CLKID_CPUB_CLK_APB] = &g12b_cpub_clk_apb.hw,
+ [CLKID_CPUB_CLK_ATB_SEL] = &g12b_cpub_clk_atb_sel.hw,
+ [CLKID_CPUB_CLK_ATB] = &g12b_cpub_clk_atb.hw,
+ [CLKID_CPUB_CLK_AXI_SEL] = &g12b_cpub_clk_axi_sel.hw,
+ [CLKID_CPUB_CLK_AXI] = &g12b_cpub_clk_axi.hw,
+ [CLKID_CPUB_CLK_TRACE_SEL] = &g12b_cpub_clk_trace_sel.hw,
+ [CLKID_CPUB_CLK_TRACE] = &g12b_cpub_clk_trace.hw,
+ [NR_CLKS] = NULL,
+ },
+ .num = NR_CLKS,
+};
+
/* Convenience table to populate regmap in .probe */
static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12a_clk81,
@@ -3021,6 +3755,27 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12a_vdec_hevcf,
&g12a_ts_div,
&g12a_ts,
+ &g12b_cpu_clk,
+ &g12b_sys1_pll_dco,
+ &g12b_sys1_pll,
+ &g12b_sys1_pll_div16_en,
+ &g12b_cpub_clk_premux0,
+ &g12b_cpub_clk_mux0_div,
+ &g12b_cpub_clk_postmux0,
+ &g12b_cpub_clk_premux1,
+ &g12b_cpub_clk_mux1_div,
+ &g12b_cpub_clk_postmux1,
+ &g12b_cpub_clk_dyn,
+ &g12b_cpub_clk,
+ &g12b_cpub_clk_div16_en,
+ &g12b_cpub_clk_apb_sel,
+ &g12b_cpub_clk_apb,
+ &g12b_cpub_clk_atb_sel,
+ &g12b_cpub_clk_atb,
+ &g12b_cpub_clk_axi_sel,
+ &g12b_cpub_clk_axi,
+ &g12b_cpub_clk_trace_sel,
+ &g12b_cpub_clk_trace,
};
static const struct reg_sequence g12a_init_regs[] = {
@@ -3035,8 +3790,15 @@ static const struct meson_eeclkc_data g12a_clkc_data = {
.init_count = ARRAY_SIZE(g12a_init_regs),
};
+static const struct meson_eeclkc_data g12b_clkc_data = {
+ .regmap_clks = g12a_clk_regmaps,
+ .regmap_clk_num = ARRAY_SIZE(g12a_clk_regmaps),
+ .hw_onecell_data = &g12b_hw_onecell_data
+};
+
static const struct of_device_id clkc_match_table[] = {
{ .compatible = "amlogic,g12a-clkc", .data = &g12a_clkc_data },
+ { .compatible = "amlogic,g12b-clkc", .data = &g12b_clkc_data },
{}
};
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index bda1501ba671..c8aed31fbe17 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -69,6 +69,8 @@
#define HHI_VDEC4_CLK_CNTL 0x1EC
#define HHI_HDCP22_CLK_CNTL 0x1F0
#define HHI_VAPBCLK_CNTL 0x1F4
+#define HHI_SYS_CPUB_CLK_CNTL1 0x200
+#define HHI_SYS_CPUB_CLK_CNTL 0x208
#define HHI_VPU_CLKB_CNTL 0x20C
#define HHI_GEN_CLK_CNTL 0x228
#define HHI_VDIN_MEAS_CLK_CNTL 0x250
@@ -102,6 +104,13 @@
#define HHI_HDMI_PLL_CNTL5 0x334
#define HHI_HDMI_PLL_CNTL6 0x338
#define HHI_SPICC_CLK_CNTL 0x3dc
+#define HHI_SYS1_PLL_CNTL0 0x380
+#define HHI_SYS1_PLL_CNTL1 0x384
+#define HHI_SYS1_PLL_CNTL2 0x388
+#define HHI_SYS1_PLL_CNTL3 0x38c
+#define HHI_SYS1_PLL_CNTL4 0x390
+#define HHI_SYS1_PLL_CNTL5 0x394
+#define HHI_SYS1_PLL_CNTL6 0x398
/*
* CLKID index values
@@ -196,8 +205,37 @@
#define CLKID_VDEC_HEVCF_SEL 208
#define CLKID_VDEC_HEVCF_DIV 209
#define CLKID_TS_DIV 211
+#define CLKID_SYS1_PLL_DCO 213
+#define CLKID_SYS1_PLL 214
+#define CLKID_SYS1_PLL_DIV16_EN 215
+#define CLKID_SYS1_PLL_DIV16 216
+#define CLKID_CPUB_CLK_DYN0_SEL 217
+#define CLKID_CPUB_CLK_DYN0_DIV 218
+#define CLKID_CPUB_CLK_DYN0 219
+#define CLKID_CPUB_CLK_DYN1_SEL 220
+#define CLKID_CPUB_CLK_DYN1_DIV 221
+#define CLKID_CPUB_CLK_DYN1 222
+#define CLKID_CPUB_CLK_DYN 223
+#define CLKID_CPUB_CLK 224
+#define CLKID_CPUB_CLK_DIV16_EN 225
+#define CLKID_CPUB_CLK_DIV16 226
+#define CLKID_CPUB_CLK_DIV2 227
+#define CLKID_CPUB_CLK_DIV3 228
+#define CLKID_CPUB_CLK_DIV4 229
+#define CLKID_CPUB_CLK_DIV5 230
+#define CLKID_CPUB_CLK_DIV6 231
+#define CLKID_CPUB_CLK_DIV7 232
+#define CLKID_CPUB_CLK_DIV8 233
+#define CLKID_CPUB_CLK_APB_SEL 234
+#define CLKID_CPUB_CLK_APB 235
+#define CLKID_CPUB_CLK_ATB_SEL 236
+#define CLKID_CPUB_CLK_ATB 237
+#define CLKID_CPUB_CLK_AXI_SEL 238
+#define CLKID_CPUB_CLK_AXI 239
+#define CLKID_CPUB_CLK_TRACE_SEL 240
+#define CLKID_CPUB_CLK_TRACE 241
-#define NR_CLKS 213
+#define NR_CLKS 242
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/g12a-clkc.h>
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 2/3] clk: meson: g12a: Add support for G12B CPUB clocks
@ 2019-05-28 8:07 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-28 8:07 UTC (permalink / raw)
To: jbrunet
Cc: linux-amlogic, linux-clk, linux-kernel, linux-arm-kernel, Neil Armstrong
Update the Meson G12A Clock driver to support the Amlogic G12B SoC.
G12B clock driver is very close, the main differences are :
- the clock tree is duplicated for the both clusters, and the
SYS_PLL are swapped between the clusters
- G12B has additional clocks like for CSI an other components
Here only the cpu clock tree is handled.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/g12a.c | 762 +++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/g12a.h | 40 +-
2 files changed, 801 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index a7b621bebb7e..1abe46a95dc1 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -150,6 +150,57 @@ static struct clk_regmap g12a_sys_pll = {
},
};
+static struct clk_regmap g12b_sys1_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .l = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_SYS1_PLL_CNTL0,
+ .shift = 29,
+ .width = 1,
+ },
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sys1_pll_dco",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12b_sys1_pll = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS1_PLL_CNTL0,
+ .shift = 16,
+ .width = 3,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sys1_pll",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "sys1_pll_dco" },
+ .num_parents = 1,
+ },
+};
+
static struct clk_regmap g12a_sys_pll_div16_en = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_SYS_CPU_CLK_CNTL1,
@@ -167,6 +218,23 @@ static struct clk_regmap g12a_sys_pll_div16_en = {
},
};
+static struct clk_regmap g12b_sys1_pll_div16_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sys1_pll_div16_en",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "sys1_pll" },
+ .num_parents = 1,
+ /*
+ * This clock is used to debug the sys_pll range
+ * Linux should not change it at runtime
+ */
+ },
+};
+
static struct clk_fixed_factor g12a_sys_pll_div16 = {
.mult = 1,
.div = 16,
@@ -178,6 +246,17 @@ static struct clk_fixed_factor g12a_sys_pll_div16 = {
},
};
+static struct clk_fixed_factor g12b_sys1_pll_div16 = {
+ .mult = 1,
+ .div = 16,
+ .hw.init = &(struct clk_init_data){
+ .name = "sys1_pll_div16",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "sys1_pll_div16_en" },
+ .num_parents = 1,
+ },
+};
+
/* Datasheet names this field as "premux0" */
static struct clk_regmap g12a_cpu_clk_premux0 = {
.data = &(struct clk_regmap_mux_data){
@@ -306,6 +385,150 @@ static struct clk_regmap g12a_cpu_clk = {
},
};
+/* Datasheet names this field as "Final_mux_sel" */
+static struct clk_regmap g12b_cpu_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL0,
+ .mask = 0x1,
+ .shift = 11,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpu_clk_dyn",
+ "sys1_pll" },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "premux0" */
+static struct clk_regmap g12b_cpub_clk_premux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x3,
+ .shift = 0,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn0_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal",
+ "fclk_div2",
+ "fclk_div3" },
+ .num_parents = 3,
+ },
+};
+
+/* Datasheet names this field as "mux0_divn_tcnt" */
+static struct clk_regmap g12b_cpub_clk_mux0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .shift = 4,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn0_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn0_sel" },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux0" */
+static struct clk_regmap g12b_cpub_clk_postmux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x1,
+ .shift = 2,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn0",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn0_sel",
+ "cpub_clk_dyn0_div" },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "premux1" */
+static struct clk_regmap g12b_cpub_clk_premux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x3,
+ .shift = 16,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn1_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal",
+ "fclk_div2",
+ "fclk_div3" },
+ .num_parents = 3,
+ },
+};
+
+/* Datasheet names this field as "Mux1_divn_tcnt" */
+static struct clk_regmap g12b_cpub_clk_mux1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .shift = 20,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn1_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn1_sel" },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux1" */
+static struct clk_regmap g12b_cpub_clk_postmux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x1,
+ .shift = 18,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn1",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn1_sel",
+ "cpub_clk_dyn1_div" },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_dyn_mux_sel" */
+static struct clk_regmap g12b_cpub_clk_dyn = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x1,
+ .shift = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_dyn",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn0",
+ "cpub_clk_dyn1" },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_mux_sel" */
+static struct clk_regmap g12b_cpub_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL,
+ .mask = 0x1,
+ .shift = 11,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_dyn",
+ "sys_pll" },
+ .num_parents = 2,
+ },
+};
+
static struct clk_regmap g12a_cpu_clk_div16_en = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_SYS_CPU_CLK_CNTL1,
@@ -323,6 +546,23 @@ static struct clk_regmap g12a_cpu_clk_div16_en = {
},
};
+static struct clk_regmap g12b_cpub_clk_div16_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_div16_en",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ /*
+ * This clock is used to debug the cpu_clk range
+ * Linux should not change it at runtime
+ */
+ },
+};
+
static struct clk_fixed_factor g12a_cpu_clk_div16 = {
.mult = 1,
.div = 16,
@@ -334,6 +574,17 @@ static struct clk_fixed_factor g12a_cpu_clk_div16 = {
},
};
+static struct clk_fixed_factor g12b_cpub_clk_div16 = {
+ .mult = 1,
+ .div = 16,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div16",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div16_en" },
+ .num_parents = 1,
+ },
+};
+
static struct clk_regmap g12a_cpu_clk_apb_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_SYS_CPU_CLK_CNTL1,
@@ -462,6 +713,240 @@ static struct clk_regmap g12a_cpu_clk_trace = {
},
};
+static struct clk_fixed_factor g12b_cpub_clk_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div2",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div3 = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div3",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div4 = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div4",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div5 = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div5",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div6 = {
+ .mult = 1,
+ .div = 6,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div6",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div7 = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div7",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12b_cpub_clk_div8 = {
+ .mult = 1,
+ .div = 8,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_div8",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpub_clk" },
+ .num_parents = 1,
+ },
+};
+
+static u32 mux_table_cpub[] = { 1, 2, 3, 4, 5, 6, 7 };
+static struct clk_regmap g12b_cpub_clk_apb_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .mask = 7,
+ .shift = 3,
+ .table = mux_table_cpub,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_apb_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div2",
+ "cpub_clk_div3",
+ "cpub_clk_div4",
+ "cpub_clk_div5",
+ "cpub_clk_div6",
+ "cpub_clk_div7",
+ "cpub_clk_div8" },
+ .num_parents = 7,
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_apb = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 16,
+ .flags = CLK_GATE_SET_TO_DISABLE,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_apb",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_apb_sel" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_atb_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .mask = 7,
+ .shift = 6,
+ .table = mux_table_cpub,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_atb_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div2",
+ "cpub_clk_div3",
+ "cpub_clk_div4",
+ "cpub_clk_div5",
+ "cpub_clk_div6",
+ "cpub_clk_div7",
+ "cpub_clk_div8" },
+ .num_parents = 7,
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_atb = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 17,
+ .flags = CLK_GATE_SET_TO_DISABLE,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_atb",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_atb_sel" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_axi_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .mask = 7,
+ .shift = 9,
+ .table = mux_table_cpub,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_axi_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div2",
+ "cpub_clk_div3",
+ "cpub_clk_div4",
+ "cpub_clk_div5",
+ "cpub_clk_div6",
+ "cpub_clk_div7",
+ "cpub_clk_div8" },
+ .num_parents = 7,
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_axi = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 18,
+ .flags = CLK_GATE_SET_TO_DISABLE,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_axi",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_axi_sel" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_trace_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .mask = 7,
+ .shift = 20,
+ .table = mux_table_cpub,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpub_clk_trace_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_div2",
+ "cpub_clk_div3",
+ "cpub_clk_div4",
+ "cpub_clk_div5",
+ "cpub_clk_div6",
+ "cpub_clk_div7",
+ "cpub_clk_div8" },
+ .num_parents = 7,
+ },
+};
+
+static struct clk_regmap g12b_cpub_clk_trace = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPUB_CLK_CNTL1,
+ .bit_idx = 23,
+ .flags = CLK_GATE_SET_TO_DISABLE,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpub_clk_trace",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ "cpub_clk_trace_sel" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ },
+};
+
static const struct pll_mult_range g12a_gp0_pll_mult_range = {
.min = 125,
.max = 255,
@@ -2827,6 +3312,255 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
.num = NR_CLKS,
};
+static struct clk_hw_onecell_data g12b_hw_onecell_data = {
+ .hws = {
+ [CLKID_SYS_PLL] = &g12a_sys_pll.hw,
+ [CLKID_FIXED_PLL] = &g12a_fixed_pll.hw,
+ [CLKID_FCLK_DIV2] = &g12a_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &g12a_fclk_div3.hw,
+ [CLKID_FCLK_DIV4] = &g12a_fclk_div4.hw,
+ [CLKID_FCLK_DIV5] = &g12a_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &g12a_fclk_div7.hw,
+ [CLKID_FCLK_DIV2P5] = &g12a_fclk_div2p5.hw,
+ [CLKID_GP0_PLL] = &g12a_gp0_pll.hw,
+ [CLKID_MPEG_SEL] = &g12a_mpeg_clk_sel.hw,
+ [CLKID_MPEG_DIV] = &g12a_mpeg_clk_div.hw,
+ [CLKID_CLK81] = &g12a_clk81.hw,
+ [CLKID_MPLL0] = &g12a_mpll0.hw,
+ [CLKID_MPLL1] = &g12a_mpll1.hw,
+ [CLKID_MPLL2] = &g12a_mpll2.hw,
+ [CLKID_MPLL3] = &g12a_mpll3.hw,
+ [CLKID_DDR] = &g12a_ddr.hw,
+ [CLKID_DOS] = &g12a_dos.hw,
+ [CLKID_AUDIO_LOCKER] = &g12a_audio_locker.hw,
+ [CLKID_MIPI_DSI_HOST] = &g12a_mipi_dsi_host.hw,
+ [CLKID_ETH_PHY] = &g12a_eth_phy.hw,
+ [CLKID_ISA] = &g12a_isa.hw,
+ [CLKID_PL301] = &g12a_pl301.hw,
+ [CLKID_PERIPHS] = &g12a_periphs.hw,
+ [CLKID_SPICC0] = &g12a_spicc_0.hw,
+ [CLKID_I2C] = &g12a_i2c.hw,
+ [CLKID_SANA] = &g12a_sana.hw,
+ [CLKID_SD] = &g12a_sd.hw,
+ [CLKID_RNG0] = &g12a_rng0.hw,
+ [CLKID_UART0] = &g12a_uart0.hw,
+ [CLKID_SPICC1] = &g12a_spicc_1.hw,
+ [CLKID_HIU_IFACE] = &g12a_hiu_reg.hw,
+ [CLKID_MIPI_DSI_PHY] = &g12a_mipi_dsi_phy.hw,
+ [CLKID_ASSIST_MISC] = &g12a_assist_misc.hw,
+ [CLKID_SD_EMMC_A] = &g12a_emmc_a.hw,
+ [CLKID_SD_EMMC_B] = &g12a_emmc_b.hw,
+ [CLKID_SD_EMMC_C] = &g12a_emmc_c.hw,
+ [CLKID_AUDIO_CODEC] = &g12a_audio_codec.hw,
+ [CLKID_AUDIO] = &g12a_audio.hw,
+ [CLKID_ETH] = &g12a_eth_core.hw,
+ [CLKID_DEMUX] = &g12a_demux.hw,
+ [CLKID_AUDIO_IFIFO] = &g12a_audio_ififo.hw,
+ [CLKID_ADC] = &g12a_adc.hw,
+ [CLKID_UART1] = &g12a_uart1.hw,
+ [CLKID_G2D] = &g12a_g2d.hw,
+ [CLKID_RESET] = &g12a_reset.hw,
+ [CLKID_PCIE_COMB] = &g12a_pcie_comb.hw,
+ [CLKID_PARSER] = &g12a_parser.hw,
+ [CLKID_USB] = &g12a_usb_general.hw,
+ [CLKID_PCIE_PHY] = &g12a_pcie_phy.hw,
+ [CLKID_AHB_ARB0] = &g12a_ahb_arb0.hw,
+ [CLKID_AHB_DATA_BUS] = &g12a_ahb_data_bus.hw,
+ [CLKID_AHB_CTRL_BUS] = &g12a_ahb_ctrl_bus.hw,
+ [CLKID_HTX_HDCP22] = &g12a_htx_hdcp22.hw,
+ [CLKID_HTX_PCLK] = &g12a_htx_pclk.hw,
+ [CLKID_BT656] = &g12a_bt656.hw,
+ [CLKID_USB1_DDR_BRIDGE] = &g12a_usb1_to_ddr.hw,
+ [CLKID_MMC_PCLK] = &g12a_mmc_pclk.hw,
+ [CLKID_UART2] = &g12a_uart2.hw,
+ [CLKID_VPU_INTR] = &g12a_vpu_intr.hw,
+ [CLKID_GIC] = &g12a_gic.hw,
+ [CLKID_SD_EMMC_A_CLK0_SEL] = &g12a_sd_emmc_a_clk0_sel.hw,
+ [CLKID_SD_EMMC_A_CLK0_DIV] = &g12a_sd_emmc_a_clk0_div.hw,
+ [CLKID_SD_EMMC_A_CLK0] = &g12a_sd_emmc_a_clk0.hw,
+ [CLKID_SD_EMMC_B_CLK0_SEL] = &g12a_sd_emmc_b_clk0_sel.hw,
+ [CLKID_SD_EMMC_B_CLK0_DIV] = &g12a_sd_emmc_b_clk0_div.hw,
+ [CLKID_SD_EMMC_B_CLK0] = &g12a_sd_emmc_b_clk0.hw,
+ [CLKID_SD_EMMC_C_CLK0_SEL] = &g12a_sd_emmc_c_clk0_sel.hw,
+ [CLKID_SD_EMMC_C_CLK0_DIV] = &g12a_sd_emmc_c_clk0_div.hw,
+ [CLKID_SD_EMMC_C_CLK0] = &g12a_sd_emmc_c_clk0.hw,
+ [CLKID_MPLL0_DIV] = &g12a_mpll0_div.hw,
+ [CLKID_MPLL1_DIV] = &g12a_mpll1_div.hw,
+ [CLKID_MPLL2_DIV] = &g12a_mpll2_div.hw,
+ [CLKID_MPLL3_DIV] = &g12a_mpll3_div.hw,
+ [CLKID_FCLK_DIV2_DIV] = &g12a_fclk_div2_div.hw,
+ [CLKID_FCLK_DIV3_DIV] = &g12a_fclk_div3_div.hw,
+ [CLKID_FCLK_DIV4_DIV] = &g12a_fclk_div4_div.hw,
+ [CLKID_FCLK_DIV5_DIV] = &g12a_fclk_div5_div.hw,
+ [CLKID_FCLK_DIV7_DIV] = &g12a_fclk_div7_div.hw,
+ [CLKID_FCLK_DIV2P5_DIV] = &g12a_fclk_div2p5_div.hw,
+ [CLKID_HIFI_PLL] = &g12a_hifi_pll.hw,
+ [CLKID_VCLK2_VENCI0] = &g12a_vclk2_venci0.hw,
+ [CLKID_VCLK2_VENCI1] = &g12a_vclk2_venci1.hw,
+ [CLKID_VCLK2_VENCP0] = &g12a_vclk2_vencp0.hw,
+ [CLKID_VCLK2_VENCP1] = &g12a_vclk2_vencp1.hw,
+ [CLKID_VCLK2_VENCT0] = &g12a_vclk2_venct0.hw,
+ [CLKID_VCLK2_VENCT1] = &g12a_vclk2_venct1.hw,
+ [CLKID_VCLK2_OTHER] = &g12a_vclk2_other.hw,
+ [CLKID_VCLK2_ENCI] = &g12a_vclk2_enci.hw,
+ [CLKID_VCLK2_ENCP] = &g12a_vclk2_encp.hw,
+ [CLKID_DAC_CLK] = &g12a_dac_clk.hw,
+ [CLKID_AOCLK] = &g12a_aoclk_gate.hw,
+ [CLKID_IEC958] = &g12a_iec958_gate.hw,
+ [CLKID_ENC480P] = &g12a_enc480p.hw,
+ [CLKID_RNG1] = &g12a_rng1.hw,
+ [CLKID_VCLK2_ENCT] = &g12a_vclk2_enct.hw,
+ [CLKID_VCLK2_ENCL] = &g12a_vclk2_encl.hw,
+ [CLKID_VCLK2_VENCLMMC] = &g12a_vclk2_venclmmc.hw,
+ [CLKID_VCLK2_VENCL] = &g12a_vclk2_vencl.hw,
+ [CLKID_VCLK2_OTHER1] = &g12a_vclk2_other1.hw,
+ [CLKID_FIXED_PLL_DCO] = &g12a_fixed_pll_dco.hw,
+ [CLKID_SYS_PLL_DCO] = &g12a_sys_pll_dco.hw,
+ [CLKID_GP0_PLL_DCO] = &g12a_gp0_pll_dco.hw,
+ [CLKID_HIFI_PLL_DCO] = &g12a_hifi_pll_dco.hw,
+ [CLKID_DMA] = &g12a_dma.hw,
+ [CLKID_EFUSE] = &g12a_efuse.hw,
+ [CLKID_ROM_BOOT] = &g12a_rom_boot.hw,
+ [CLKID_RESET_SEC] = &g12a_reset_sec.hw,
+ [CLKID_SEC_AHB_APB3] = &g12a_sec_ahb_apb3.hw,
+ [CLKID_MPLL_PREDIV] = &g12a_mpll_prediv.hw,
+ [CLKID_VPU_0_SEL] = &g12a_vpu_0_sel.hw,
+ [CLKID_VPU_0_DIV] = &g12a_vpu_0_div.hw,
+ [CLKID_VPU_0] = &g12a_vpu_0.hw,
+ [CLKID_VPU_1_SEL] = &g12a_vpu_1_sel.hw,
+ [CLKID_VPU_1_DIV] = &g12a_vpu_1_div.hw,
+ [CLKID_VPU_1] = &g12a_vpu_1.hw,
+ [CLKID_VPU] = &g12a_vpu.hw,
+ [CLKID_VAPB_0_SEL] = &g12a_vapb_0_sel.hw,
+ [CLKID_VAPB_0_DIV] = &g12a_vapb_0_div.hw,
+ [CLKID_VAPB_0] = &g12a_vapb_0.hw,
+ [CLKID_VAPB_1_SEL] = &g12a_vapb_1_sel.hw,
+ [CLKID_VAPB_1_DIV] = &g12a_vapb_1_div.hw,
+ [CLKID_VAPB_1] = &g12a_vapb_1.hw,
+ [CLKID_VAPB_SEL] = &g12a_vapb_sel.hw,
+ [CLKID_VAPB] = &g12a_vapb.hw,
+ [CLKID_HDMI_PLL_DCO] = &g12a_hdmi_pll_dco.hw,
+ [CLKID_HDMI_PLL_OD] = &g12a_hdmi_pll_od.hw,
+ [CLKID_HDMI_PLL_OD2] = &g12a_hdmi_pll_od2.hw,
+ [CLKID_HDMI_PLL] = &g12a_hdmi_pll.hw,
+ [CLKID_VID_PLL] = &g12a_vid_pll_div.hw,
+ [CLKID_VID_PLL_SEL] = &g12a_vid_pll_sel.hw,
+ [CLKID_VID_PLL_DIV] = &g12a_vid_pll.hw,
+ [CLKID_VCLK_SEL] = &g12a_vclk_sel.hw,
+ [CLKID_VCLK2_SEL] = &g12a_vclk2_sel.hw,
+ [CLKID_VCLK_INPUT] = &g12a_vclk_input.hw,
+ [CLKID_VCLK2_INPUT] = &g12a_vclk2_input.hw,
+ [CLKID_VCLK_DIV] = &g12a_vclk_div.hw,
+ [CLKID_VCLK2_DIV] = &g12a_vclk2_div.hw,
+ [CLKID_VCLK] = &g12a_vclk.hw,
+ [CLKID_VCLK2] = &g12a_vclk2.hw,
+ [CLKID_VCLK_DIV1] = &g12a_vclk_div1.hw,
+ [CLKID_VCLK_DIV2_EN] = &g12a_vclk_div2_en.hw,
+ [CLKID_VCLK_DIV4_EN] = &g12a_vclk_div4_en.hw,
+ [CLKID_VCLK_DIV6_EN] = &g12a_vclk_div6_en.hw,
+ [CLKID_VCLK_DIV12_EN] = &g12a_vclk_div12_en.hw,
+ [CLKID_VCLK2_DIV1] = &g12a_vclk2_div1.hw,
+ [CLKID_VCLK2_DIV2_EN] = &g12a_vclk2_div2_en.hw,
+ [CLKID_VCLK2_DIV4_EN] = &g12a_vclk2_div4_en.hw,
+ [CLKID_VCLK2_DIV6_EN] = &g12a_vclk2_div6_en.hw,
+ [CLKID_VCLK2_DIV12_EN] = &g12a_vclk2_div12_en.hw,
+ [CLKID_VCLK_DIV2] = &g12a_vclk_div2.hw,
+ [CLKID_VCLK_DIV4] = &g12a_vclk_div4.hw,
+ [CLKID_VCLK_DIV6] = &g12a_vclk_div6.hw,
+ [CLKID_VCLK_DIV12] = &g12a_vclk_div12.hw,
+ [CLKID_VCLK2_DIV2] = &g12a_vclk2_div2.hw,
+ [CLKID_VCLK2_DIV4] = &g12a_vclk2_div4.hw,
+ [CLKID_VCLK2_DIV6] = &g12a_vclk2_div6.hw,
+ [CLKID_VCLK2_DIV12] = &g12a_vclk2_div12.hw,
+ [CLKID_CTS_ENCI_SEL] = &g12a_cts_enci_sel.hw,
+ [CLKID_CTS_ENCP_SEL] = &g12a_cts_encp_sel.hw,
+ [CLKID_CTS_VDAC_SEL] = &g12a_cts_vdac_sel.hw,
+ [CLKID_HDMI_TX_SEL] = &g12a_hdmi_tx_sel.hw,
+ [CLKID_CTS_ENCI] = &g12a_cts_enci.hw,
+ [CLKID_CTS_ENCP] = &g12a_cts_encp.hw,
+ [CLKID_CTS_VDAC] = &g12a_cts_vdac.hw,
+ [CLKID_HDMI_TX] = &g12a_hdmi_tx.hw,
+ [CLKID_HDMI_SEL] = &g12a_hdmi_sel.hw,
+ [CLKID_HDMI_DIV] = &g12a_hdmi_div.hw,
+ [CLKID_HDMI] = &g12a_hdmi.hw,
+ [CLKID_MALI_0_SEL] = &g12a_mali_0_sel.hw,
+ [CLKID_MALI_0_DIV] = &g12a_mali_0_div.hw,
+ [CLKID_MALI_0] = &g12a_mali_0.hw,
+ [CLKID_MALI_1_SEL] = &g12a_mali_1_sel.hw,
+ [CLKID_MALI_1_DIV] = &g12a_mali_1_div.hw,
+ [CLKID_MALI_1] = &g12a_mali_1.hw,
+ [CLKID_MALI] = &g12a_mali.hw,
+ [CLKID_MPLL_50M_DIV] = &g12a_mpll_50m_div.hw,
+ [CLKID_MPLL_50M] = &g12a_mpll_50m.hw,
+ [CLKID_SYS_PLL_DIV16_EN] = &g12a_sys_pll_div16_en.hw,
+ [CLKID_SYS_PLL_DIV16] = &g12a_sys_pll_div16.hw,
+ [CLKID_CPU_CLK_DYN0_SEL] = &g12a_cpu_clk_premux0.hw,
+ [CLKID_CPU_CLK_DYN0_DIV] = &g12a_cpu_clk_mux0_div.hw,
+ [CLKID_CPU_CLK_DYN0] = &g12a_cpu_clk_postmux0.hw,
+ [CLKID_CPU_CLK_DYN1_SEL] = &g12a_cpu_clk_premux1.hw,
+ [CLKID_CPU_CLK_DYN1_DIV] = &g12a_cpu_clk_mux1_div.hw,
+ [CLKID_CPU_CLK_DYN1] = &g12a_cpu_clk_postmux1.hw,
+ [CLKID_CPU_CLK_DYN] = &g12a_cpu_clk_dyn.hw,
+ [CLKID_CPU_CLK] = &g12b_cpu_clk.hw,
+ [CLKID_CPU_CLK_DIV16_EN] = &g12a_cpu_clk_div16_en.hw,
+ [CLKID_CPU_CLK_DIV16] = &g12a_cpu_clk_div16.hw,
+ [CLKID_CPU_CLK_APB_DIV] = &g12a_cpu_clk_apb_div.hw,
+ [CLKID_CPU_CLK_APB] = &g12a_cpu_clk_apb.hw,
+ [CLKID_CPU_CLK_ATB_DIV] = &g12a_cpu_clk_atb_div.hw,
+ [CLKID_CPU_CLK_ATB] = &g12a_cpu_clk_atb.hw,
+ [CLKID_CPU_CLK_AXI_DIV] = &g12a_cpu_clk_axi_div.hw,
+ [CLKID_CPU_CLK_AXI] = &g12a_cpu_clk_axi.hw,
+ [CLKID_CPU_CLK_TRACE_DIV] = &g12a_cpu_clk_trace_div.hw,
+ [CLKID_CPU_CLK_TRACE] = &g12a_cpu_clk_trace.hw,
+ [CLKID_PCIE_PLL_DCO] = &g12a_pcie_pll_dco.hw,
+ [CLKID_PCIE_PLL_DCO_DIV2] = &g12a_pcie_pll_dco_div2.hw,
+ [CLKID_PCIE_PLL_OD] = &g12a_pcie_pll_od.hw,
+ [CLKID_PCIE_PLL] = &g12a_pcie_pll.hw,
+ [CLKID_VDEC_1_SEL] = &g12a_vdec_1_sel.hw,
+ [CLKID_VDEC_1_DIV] = &g12a_vdec_1_div.hw,
+ [CLKID_VDEC_1] = &g12a_vdec_1.hw,
+ [CLKID_VDEC_HEVC_SEL] = &g12a_vdec_hevc_sel.hw,
+ [CLKID_VDEC_HEVC_DIV] = &g12a_vdec_hevc_div.hw,
+ [CLKID_VDEC_HEVC] = &g12a_vdec_hevc.hw,
+ [CLKID_VDEC_HEVCF_SEL] = &g12a_vdec_hevcf_sel.hw,
+ [CLKID_VDEC_HEVCF_DIV] = &g12a_vdec_hevcf_div.hw,
+ [CLKID_VDEC_HEVCF] = &g12a_vdec_hevcf.hw,
+ [CLKID_TS_DIV] = &g12a_ts_div.hw,
+ [CLKID_TS] = &g12a_ts.hw,
+ [CLKID_SYS1_PLL_DCO] = &g12b_sys1_pll_dco.hw,
+ [CLKID_SYS1_PLL] = &g12b_sys1_pll.hw,
+ [CLKID_SYS1_PLL_DIV16_EN] = &g12b_sys1_pll_div16_en.hw,
+ [CLKID_SYS1_PLL_DIV16] = &g12b_sys1_pll_div16.hw,
+ [CLKID_CPUB_CLK_DYN0_SEL] = &g12b_cpub_clk_premux0.hw,
+ [CLKID_CPUB_CLK_DYN0_DIV] = &g12b_cpub_clk_mux0_div.hw,
+ [CLKID_CPUB_CLK_DYN0] = &g12b_cpub_clk_postmux0.hw,
+ [CLKID_CPUB_CLK_DYN1_SEL] = &g12b_cpub_clk_premux1.hw,
+ [CLKID_CPUB_CLK_DYN1_DIV] = &g12b_cpub_clk_mux1_div.hw,
+ [CLKID_CPUB_CLK_DYN1] = &g12b_cpub_clk_postmux1.hw,
+ [CLKID_CPUB_CLK_DYN] = &g12b_cpub_clk_dyn.hw,
+ [CLKID_CPUB_CLK] = &g12b_cpub_clk.hw,
+ [CLKID_CPUB_CLK_DIV16_EN] = &g12b_cpub_clk_div16_en.hw,
+ [CLKID_CPUB_CLK_DIV16] = &g12b_cpub_clk_div16.hw,
+ [CLKID_CPUB_CLK_DIV2] = &g12b_cpub_clk_div2.hw,
+ [CLKID_CPUB_CLK_DIV3] = &g12b_cpub_clk_div3.hw,
+ [CLKID_CPUB_CLK_DIV4] = &g12b_cpub_clk_div4.hw,
+ [CLKID_CPUB_CLK_DIV5] = &g12b_cpub_clk_div5.hw,
+ [CLKID_CPUB_CLK_DIV6] = &g12b_cpub_clk_div6.hw,
+ [CLKID_CPUB_CLK_DIV7] = &g12b_cpub_clk_div7.hw,
+ [CLKID_CPUB_CLK_DIV8] = &g12b_cpub_clk_div8.hw,
+ [CLKID_CPUB_CLK_APB_SEL] = &g12b_cpub_clk_apb_sel.hw,
+ [CLKID_CPUB_CLK_APB] = &g12b_cpub_clk_apb.hw,
+ [CLKID_CPUB_CLK_ATB_SEL] = &g12b_cpub_clk_atb_sel.hw,
+ [CLKID_CPUB_CLK_ATB] = &g12b_cpub_clk_atb.hw,
+ [CLKID_CPUB_CLK_AXI_SEL] = &g12b_cpub_clk_axi_sel.hw,
+ [CLKID_CPUB_CLK_AXI] = &g12b_cpub_clk_axi.hw,
+ [CLKID_CPUB_CLK_TRACE_SEL] = &g12b_cpub_clk_trace_sel.hw,
+ [CLKID_CPUB_CLK_TRACE] = &g12b_cpub_clk_trace.hw,
+ [NR_CLKS] = NULL,
+ },
+ .num = NR_CLKS,
+};
+
/* Convenience table to populate regmap in .probe */
static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12a_clk81,
@@ -3021,6 +3755,27 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12a_vdec_hevcf,
&g12a_ts_div,
&g12a_ts,
+ &g12b_cpu_clk,
+ &g12b_sys1_pll_dco,
+ &g12b_sys1_pll,
+ &g12b_sys1_pll_div16_en,
+ &g12b_cpub_clk_premux0,
+ &g12b_cpub_clk_mux0_div,
+ &g12b_cpub_clk_postmux0,
+ &g12b_cpub_clk_premux1,
+ &g12b_cpub_clk_mux1_div,
+ &g12b_cpub_clk_postmux1,
+ &g12b_cpub_clk_dyn,
+ &g12b_cpub_clk,
+ &g12b_cpub_clk_div16_en,
+ &g12b_cpub_clk_apb_sel,
+ &g12b_cpub_clk_apb,
+ &g12b_cpub_clk_atb_sel,
+ &g12b_cpub_clk_atb,
+ &g12b_cpub_clk_axi_sel,
+ &g12b_cpub_clk_axi,
+ &g12b_cpub_clk_trace_sel,
+ &g12b_cpub_clk_trace,
};
static const struct reg_sequence g12a_init_regs[] = {
@@ -3035,8 +3790,15 @@ static const struct meson_eeclkc_data g12a_clkc_data = {
.init_count = ARRAY_SIZE(g12a_init_regs),
};
+static const struct meson_eeclkc_data g12b_clkc_data = {
+ .regmap_clks = g12a_clk_regmaps,
+ .regmap_clk_num = ARRAY_SIZE(g12a_clk_regmaps),
+ .hw_onecell_data = &g12b_hw_onecell_data
+};
+
static const struct of_device_id clkc_match_table[] = {
{ .compatible = "amlogic,g12a-clkc", .data = &g12a_clkc_data },
+ { .compatible = "amlogic,g12b-clkc", .data = &g12b_clkc_data },
{}
};
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index bda1501ba671..c8aed31fbe17 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -69,6 +69,8 @@
#define HHI_VDEC4_CLK_CNTL 0x1EC
#define HHI_HDCP22_CLK_CNTL 0x1F0
#define HHI_VAPBCLK_CNTL 0x1F4
+#define HHI_SYS_CPUB_CLK_CNTL1 0x200
+#define HHI_SYS_CPUB_CLK_CNTL 0x208
#define HHI_VPU_CLKB_CNTL 0x20C
#define HHI_GEN_CLK_CNTL 0x228
#define HHI_VDIN_MEAS_CLK_CNTL 0x250
@@ -102,6 +104,13 @@
#define HHI_HDMI_PLL_CNTL5 0x334
#define HHI_HDMI_PLL_CNTL6 0x338
#define HHI_SPICC_CLK_CNTL 0x3dc
+#define HHI_SYS1_PLL_CNTL0 0x380
+#define HHI_SYS1_PLL_CNTL1 0x384
+#define HHI_SYS1_PLL_CNTL2 0x388
+#define HHI_SYS1_PLL_CNTL3 0x38c
+#define HHI_SYS1_PLL_CNTL4 0x390
+#define HHI_SYS1_PLL_CNTL5 0x394
+#define HHI_SYS1_PLL_CNTL6 0x398
/*
* CLKID index values
@@ -196,8 +205,37 @@
#define CLKID_VDEC_HEVCF_SEL 208
#define CLKID_VDEC_HEVCF_DIV 209
#define CLKID_TS_DIV 211
+#define CLKID_SYS1_PLL_DCO 213
+#define CLKID_SYS1_PLL 214
+#define CLKID_SYS1_PLL_DIV16_EN 215
+#define CLKID_SYS1_PLL_DIV16 216
+#define CLKID_CPUB_CLK_DYN0_SEL 217
+#define CLKID_CPUB_CLK_DYN0_DIV 218
+#define CLKID_CPUB_CLK_DYN0 219
+#define CLKID_CPUB_CLK_DYN1_SEL 220
+#define CLKID_CPUB_CLK_DYN1_DIV 221
+#define CLKID_CPUB_CLK_DYN1 222
+#define CLKID_CPUB_CLK_DYN 223
+#define CLKID_CPUB_CLK 224
+#define CLKID_CPUB_CLK_DIV16_EN 225
+#define CLKID_CPUB_CLK_DIV16 226
+#define CLKID_CPUB_CLK_DIV2 227
+#define CLKID_CPUB_CLK_DIV3 228
+#define CLKID_CPUB_CLK_DIV4 229
+#define CLKID_CPUB_CLK_DIV5 230
+#define CLKID_CPUB_CLK_DIV6 231
+#define CLKID_CPUB_CLK_DIV7 232
+#define CLKID_CPUB_CLK_DIV8 233
+#define CLKID_CPUB_CLK_APB_SEL 234
+#define CLKID_CPUB_CLK_APB 235
+#define CLKID_CPUB_CLK_ATB_SEL 236
+#define CLKID_CPUB_CLK_ATB 237
+#define CLKID_CPUB_CLK_AXI_SEL 238
+#define CLKID_CPUB_CLK_AXI 239
+#define CLKID_CPUB_CLK_TRACE_SEL 240
+#define CLKID_CPUB_CLK_TRACE 241
-#define NR_CLKS 213
+#define NR_CLKS 242
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/g12a-clkc.h>
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 3/3] clk: meson: g12a: mark fclk_div3 as critical
2019-05-28 8:07 ` Neil Armstrong
(?)
@ 2019-05-28 8:07 ` Neil Armstrong
-1 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-28 8:07 UTC (permalink / raw)
To: jbrunet
Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel, linux-clk
On Amlogic Meson G12b platform, the fclk_div3 seems to be necessary for
the system to operate correctly.
Disabling it cause the entire system to freeze, including peripherals.
Let's mark this clock as critical, fixing boot on G12b platforms.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/g12a.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 1abe46a95dc1..3c75ef5e4d24 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -1350,6 +1350,16 @@ static struct clk_regmap g12a_fclk_div3 = {
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div3_div" },
.num_parents = 1,
+ /*
+ * This clock is used by the resident firmware and is required
+ * by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
},
};
--
2.21.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 3/3] clk: meson: g12a: mark fclk_div3 as critical
@ 2019-05-28 8:07 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-28 8:07 UTC (permalink / raw)
To: jbrunet
Cc: linux-amlogic, linux-clk, linux-kernel, linux-arm-kernel, Neil Armstrong
On Amlogic Meson G12b platform, the fclk_div3 seems to be necessary for
the system to operate correctly.
Disabling it cause the entire system to freeze, including peripherals.
Let's mark this clock as critical, fixing boot on G12b platforms.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/g12a.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 1abe46a95dc1..3c75ef5e4d24 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -1350,6 +1350,16 @@ static struct clk_regmap g12a_fclk_div3 = {
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div3_div" },
.num_parents = 1,
+ /*
+ * This clock is used by the resident firmware and is required
+ * by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
},
};
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 3/3] clk: meson: g12a: mark fclk_div3 as critical
@ 2019-05-28 8:07 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-28 8:07 UTC (permalink / raw)
To: jbrunet
Cc: linux-amlogic, linux-clk, linux-kernel, linux-arm-kernel, Neil Armstrong
On Amlogic Meson G12b platform, the fclk_div3 seems to be necessary for
the system to operate correctly.
Disabling it cause the entire system to freeze, including peripherals.
Let's mark this clock as critical, fixing boot on G12b platforms.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/g12a.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 1abe46a95dc1..3c75ef5e4d24 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -1350,6 +1350,16 @@ static struct clk_regmap g12a_fclk_div3 = {
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div3_div" },
.num_parents = 1,
+ /*
+ * This clock is used by the resident firmware and is required
+ * by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
},
};
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/3] clk: meson: g12a: Add support for G12B CPUB clocks
2019-05-28 8:07 ` Neil Armstrong
(?)
@ 2019-05-28 18:13 ` Martin Blumenstingl
-1 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2019-05-28 18:13 UTC (permalink / raw)
To: Neil Armstrong
Cc: jbrunet, linux-amlogic, linux-clk, linux-kernel, linux-arm-kernel
Hi Neil,
On Tue, May 28, 2019 at 10:08 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Update the Meson G12A Clock driver to support the Amlogic G12B SoC.
>
> G12B clock driver is very close, the main differences are :
> - the clock tree is duplicated for the both clusters, and the
> SYS_PLL are swapped between the clusters
> - G12B has additional clocks like for CSI an other components
>
> Here only the cpu clock tree is handled.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
thank you for taking care of everything I noticed in the previous version!
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
do you still have the CPU post-divider muxes (which are currently
modeled as CLK_DIVIDER_POWER_OF_TWO dividers) on your TODO-list once
this is merged?
Martin
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/3] clk: meson: g12a: Add support for G12B CPUB clocks
@ 2019-05-28 18:13 ` Martin Blumenstingl
0 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2019-05-28 18:13 UTC (permalink / raw)
To: Neil Armstrong
Cc: linux-arm-kernel, linux-amlogic, linux-clk, linux-kernel, jbrunet
Hi Neil,
On Tue, May 28, 2019 at 10:08 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Update the Meson G12A Clock driver to support the Amlogic G12B SoC.
>
> G12B clock driver is very close, the main differences are :
> - the clock tree is duplicated for the both clusters, and the
> SYS_PLL are swapped between the clusters
> - G12B has additional clocks like for CSI an other components
>
> Here only the cpu clock tree is handled.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
thank you for taking care of everything I noticed in the previous version!
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
do you still have the CPU post-divider muxes (which are currently
modeled as CLK_DIVIDER_POWER_OF_TWO dividers) on your TODO-list once
this is merged?
Martin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/3] clk: meson: g12a: Add support for G12B CPUB clocks
@ 2019-05-28 18:13 ` Martin Blumenstingl
0 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2019-05-28 18:13 UTC (permalink / raw)
To: Neil Armstrong
Cc: linux-arm-kernel, linux-amlogic, linux-clk, linux-kernel, jbrunet
Hi Neil,
On Tue, May 28, 2019 at 10:08 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Update the Meson G12A Clock driver to support the Amlogic G12B SoC.
>
> G12B clock driver is very close, the main differences are :
> - the clock tree is duplicated for the both clusters, and the
> SYS_PLL are swapped between the clusters
> - G12B has additional clocks like for CSI an other components
>
> Here only the cpu clock tree is handled.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
thank you for taking care of everything I noticed in the previous version!
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
do you still have the CPU post-divider muxes (which are currently
modeled as CLK_DIVIDER_POWER_OF_TWO dividers) on your TODO-list once
this is merged?
Martin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/3] clk: meson: g12a: Add support for G12B CPUB clocks
2019-05-28 18:13 ` Martin Blumenstingl
(?)
@ 2019-05-29 10:23 ` Neil Armstrong
-1 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-29 10:23 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: jbrunet, linux-amlogic, linux-clk, linux-kernel, linux-arm-kernel
On 28/05/2019 20:13, Martin Blumenstingl wrote:
> Hi Neil,
>
> On Tue, May 28, 2019 at 10:08 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> Update the Meson G12A Clock driver to support the Amlogic G12B SoC.
>>
>> G12B clock driver is very close, the main differences are :
>> - the clock tree is duplicated for the both clusters, and the
>> SYS_PLL are swapped between the clusters
>> - G12B has additional clocks like for CSI an other components
>>
>> Here only the cpu clock tree is handled.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> thank you for taking care of everything I noticed in the previous version!
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>
> do you still have the CPU post-divider muxes (which are currently
> modeled as CLK_DIVIDER_POWER_OF_TWO dividers) on your TODO-list once
> this is merged?
Yes, thanks for reviewing !
Neil
>
>
> Martin
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/3] clk: meson: g12a: Add support for G12B CPUB clocks
@ 2019-05-29 10:23 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-29 10:23 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: linux-arm-kernel, linux-amlogic, linux-clk, linux-kernel, jbrunet
On 28/05/2019 20:13, Martin Blumenstingl wrote:
> Hi Neil,
>
> On Tue, May 28, 2019 at 10:08 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> Update the Meson G12A Clock driver to support the Amlogic G12B SoC.
>>
>> G12B clock driver is very close, the main differences are :
>> - the clock tree is duplicated for the both clusters, and the
>> SYS_PLL are swapped between the clusters
>> - G12B has additional clocks like for CSI an other components
>>
>> Here only the cpu clock tree is handled.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> thank you for taking care of everything I noticed in the previous version!
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>
> do you still have the CPU post-divider muxes (which are currently
> modeled as CLK_DIVIDER_POWER_OF_TWO dividers) on your TODO-list once
> this is merged?
Yes, thanks for reviewing !
Neil
>
>
> Martin
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/3] clk: meson: g12a: Add support for G12B CPUB clocks
@ 2019-05-29 10:23 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-05-29 10:23 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: linux-arm-kernel, linux-amlogic, linux-clk, linux-kernel, jbrunet
On 28/05/2019 20:13, Martin Blumenstingl wrote:
> Hi Neil,
>
> On Tue, May 28, 2019 at 10:08 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> Update the Meson G12A Clock driver to support the Amlogic G12B SoC.
>>
>> G12B clock driver is very close, the main differences are :
>> - the clock tree is duplicated for the both clusters, and the
>> SYS_PLL are swapped between the clusters
>> - G12B has additional clocks like for CSI an other components
>>
>> Here only the cpu clock tree is handled.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> thank you for taking care of everything I noticed in the previous version!
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>
> do you still have the CPU post-divider muxes (which are currently
> modeled as CLK_DIVIDER_POWER_OF_TWO dividers) on your TODO-list once
> this is merged?
Yes, thanks for reviewing !
Neil
>
>
> Martin
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 0/3] clk: meson: add support for Amlogic G12B
2019-05-28 8:07 ` Neil Armstrong
(?)
@ 2019-06-11 12:33 ` Jerome Brunet
-1 siblings, 0 replies; 21+ messages in thread
From: Jerome Brunet @ 2019-06-11 12:33 UTC (permalink / raw)
To: Neil Armstrong; +Cc: linux-clk, linux-amlogic, linux-arm-kernel, linux-kernel
On Tue, 2019-05-28 at 10:07 +0200, Neil Armstrong wrote:
> The Amlogic G12B SoC is very similar with the G12A SoC, sharing
> most of the features and architecture.
> G12B clock tree is very close, the main differences are :
> - SYS_PLL is used for the second cluster (otherwise used fir the first on G12a)
> - SYS_PLL1 is used for the first cluster (instead of SYS_PLL on G12a)
> - A duplicate CPU tree is added for the second cluster
> - G12B has additional clocks like for CSI an other components, not handled yet
>
> Dependencies :
> - Patch 1, 3 : None
> - Patch 2 : Depends on Guillaume's Temperature sensor Clock patches at [1]
>
> This patchset is a spinoff of the v2 Odroid-N2 megapatchset at [2]
>
> Changes since v1 at [3]:
> - Added the cpub_clk div2..8 and replaces the ahb/atb/axi/trace divs by muxes
> - Added the CLK_GATE_SET_TO_DISABLE flag to ahb/atb/axi/trace gates
> - Fixed all the G12A typos
> - Added martin's reviewed by on patch 1
>
> Changes since original patchset :
> - Added missing sys1_pll div16, cpub div16 and cpub atb/axi/ahb/trace clocks
> - Rewrote "This patch .." in commit messages
>
> [1] https://lkml.kernel.org/r/20190412100221.26740-1-glaroque@baylibre.com
> [2] https://lkml.kernel.org/r/20190423091503.10847-1-narmstrong@baylibre.com
> [3] https://lkml.kernel.org/r/20190521150130.31684-1-narmstrong@baylibre.com
>
> Neil Armstrong (3):
> dt-bindings: clk: meson: add g12b periph clock controller bindings
> clk: meson: g12a: Add support for G12B CPUB clocks
> clk: meson: g12a: mark fclk_div3 as critical
>
> .../bindings/clock/amlogic,gxbb-clkc.txt | 1 +
> drivers/clk/meson/g12a.c | 772 ++++++++++++++++++
> drivers/clk/meson/g12a.h | 40 +-
> 3 files changed, 812 insertions(+), 1 deletion(-)
>
Applied
Thx
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 0/3] clk: meson: add support for Amlogic G12B
@ 2019-06-11 12:33 ` Jerome Brunet
0 siblings, 0 replies; 21+ messages in thread
From: Jerome Brunet @ 2019-06-11 12:33 UTC (permalink / raw)
To: Neil Armstrong; +Cc: linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel
On Tue, 2019-05-28 at 10:07 +0200, Neil Armstrong wrote:
> The Amlogic G12B SoC is very similar with the G12A SoC, sharing
> most of the features and architecture.
> G12B clock tree is very close, the main differences are :
> - SYS_PLL is used for the second cluster (otherwise used fir the first on G12a)
> - SYS_PLL1 is used for the first cluster (instead of SYS_PLL on G12a)
> - A duplicate CPU tree is added for the second cluster
> - G12B has additional clocks like for CSI an other components, not handled yet
>
> Dependencies :
> - Patch 1, 3 : None
> - Patch 2 : Depends on Guillaume's Temperature sensor Clock patches at [1]
>
> This patchset is a spinoff of the v2 Odroid-N2 megapatchset at [2]
>
> Changes since v1 at [3]:
> - Added the cpub_clk div2..8 and replaces the ahb/atb/axi/trace divs by muxes
> - Added the CLK_GATE_SET_TO_DISABLE flag to ahb/atb/axi/trace gates
> - Fixed all the G12A typos
> - Added martin's reviewed by on patch 1
>
> Changes since original patchset :
> - Added missing sys1_pll div16, cpub div16 and cpub atb/axi/ahb/trace clocks
> - Rewrote "This patch .." in commit messages
>
> [1] https://lkml.kernel.org/r/20190412100221.26740-1-glaroque@baylibre.com
> [2] https://lkml.kernel.org/r/20190423091503.10847-1-narmstrong@baylibre.com
> [3] https://lkml.kernel.org/r/20190521150130.31684-1-narmstrong@baylibre.com
>
> Neil Armstrong (3):
> dt-bindings: clk: meson: add g12b periph clock controller bindings
> clk: meson: g12a: Add support for G12B CPUB clocks
> clk: meson: g12a: mark fclk_div3 as critical
>
> .../bindings/clock/amlogic,gxbb-clkc.txt | 1 +
> drivers/clk/meson/g12a.c | 772 ++++++++++++++++++
> drivers/clk/meson/g12a.h | 40 +-
> 3 files changed, 812 insertions(+), 1 deletion(-)
>
Applied
Thx
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 0/3] clk: meson: add support for Amlogic G12B
@ 2019-06-11 12:33 ` Jerome Brunet
0 siblings, 0 replies; 21+ messages in thread
From: Jerome Brunet @ 2019-06-11 12:33 UTC (permalink / raw)
To: Neil Armstrong; +Cc: linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel
On Tue, 2019-05-28 at 10:07 +0200, Neil Armstrong wrote:
> The Amlogic G12B SoC is very similar with the G12A SoC, sharing
> most of the features and architecture.
> G12B clock tree is very close, the main differences are :
> - SYS_PLL is used for the second cluster (otherwise used fir the first on G12a)
> - SYS_PLL1 is used for the first cluster (instead of SYS_PLL on G12a)
> - A duplicate CPU tree is added for the second cluster
> - G12B has additional clocks like for CSI an other components, not handled yet
>
> Dependencies :
> - Patch 1, 3 : None
> - Patch 2 : Depends on Guillaume's Temperature sensor Clock patches at [1]
>
> This patchset is a spinoff of the v2 Odroid-N2 megapatchset at [2]
>
> Changes since v1 at [3]:
> - Added the cpub_clk div2..8 and replaces the ahb/atb/axi/trace divs by muxes
> - Added the CLK_GATE_SET_TO_DISABLE flag to ahb/atb/axi/trace gates
> - Fixed all the G12A typos
> - Added martin's reviewed by on patch 1
>
> Changes since original patchset :
> - Added missing sys1_pll div16, cpub div16 and cpub atb/axi/ahb/trace clocks
> - Rewrote "This patch .." in commit messages
>
> [1] https://lkml.kernel.org/r/20190412100221.26740-1-glaroque@baylibre.com
> [2] https://lkml.kernel.org/r/20190423091503.10847-1-narmstrong@baylibre.com
> [3] https://lkml.kernel.org/r/20190521150130.31684-1-narmstrong@baylibre.com
>
> Neil Armstrong (3):
> dt-bindings: clk: meson: add g12b periph clock controller bindings
> clk: meson: g12a: Add support for G12B CPUB clocks
> clk: meson: g12a: mark fclk_div3 as critical
>
> .../bindings/clock/amlogic,gxbb-clkc.txt | 1 +
> drivers/clk/meson/g12a.c | 772 ++++++++++++++++++
> drivers/clk/meson/g12a.h | 40 +-
> 3 files changed, 812 insertions(+), 1 deletion(-)
>
Applied
Thx
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2019-06-11 12:33 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-28 8:07 [PATCH v2 0/3] clk: meson: add support for Amlogic G12B Neil Armstrong
2019-05-28 8:07 ` Neil Armstrong
2019-05-28 8:07 ` Neil Armstrong
2019-05-28 8:07 ` [PATCH v2 1/3] dt-bindings: clk: meson: add g12b periph clock controller bindings Neil Armstrong
2019-05-28 8:07 ` Neil Armstrong
2019-05-28 8:07 ` Neil Armstrong
2019-05-28 8:07 ` [PATCH v2 2/3] clk: meson: g12a: Add support for G12B CPUB clocks Neil Armstrong
2019-05-28 8:07 ` Neil Armstrong
2019-05-28 8:07 ` Neil Armstrong
2019-05-28 18:13 ` Martin Blumenstingl
2019-05-28 18:13 ` Martin Blumenstingl
2019-05-28 18:13 ` Martin Blumenstingl
2019-05-29 10:23 ` Neil Armstrong
2019-05-29 10:23 ` Neil Armstrong
2019-05-29 10:23 ` Neil Armstrong
2019-05-28 8:07 ` [PATCH v2 3/3] clk: meson: g12a: mark fclk_div3 as critical Neil Armstrong
2019-05-28 8:07 ` Neil Armstrong
2019-05-28 8:07 ` Neil Armstrong
2019-06-11 12:33 ` [PATCH v2 0/3] clk: meson: add support for Amlogic G12B Jerome Brunet
2019-06-11 12:33 ` Jerome Brunet
2019-06-11 12:33 ` Jerome Brunet
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.