From mboxrd@z Thu Jan 1 00:00:00 1970 From: Faiz Abbas Date: Wed, 29 May 2019 15:15:06 +0530 Subject: [U-Boot] [PATCH v5 06/15] arm: dts: k3: Add phy specific properties to SD card node In-Reply-To: <20190529094515.13517-1-faiz_abbas@ti.com> References: <20190529094515.13517-1-faiz_abbas@ti.com> Message-ID: <20190529094515.13517-7-faiz_abbas@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de With changes in the driver requiring phy related properties, add the same for the SD card node to prevent breaking boot with the driver update. Signed-off-by: Faiz Abbas Reviewed-by: Tom Rini --- arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 3 +++ arch/arm/dts/k3-am654-r5-base-board.dts | 1 + 2 files changed, 4 insertions(+) diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi index 589a90f9f9..c43888f36d 100644 --- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi +++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi @@ -34,6 +34,8 @@ clocks = <&k3_clks 48 1>; power-domains = <&k3_pds 48>; max-frequency = <25000000>; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; }; }; @@ -190,4 +192,5 @@ pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; sdhci-caps-mask = <0x7 0x0>; + ti,driver-strength-ohm = <50>; }; diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts index 47cbfa5a3c..1d244b9ab9 100644 --- a/arch/arm/dts/k3-am654-r5-base-board.dts +++ b/arch/arm/dts/k3-am654-r5-base-board.dts @@ -167,4 +167,5 @@ clock-names = "clk_xin"; clocks = <&clk_200mhz>; /delete-property/ power-domains; + ti,driver-strength-ohm = <50>; }; -- 2.19.2