[PATCH net-next 08/11] net: dsa: sja1105: Add P/Q/R/S management route support via dynamic interface

[Vladimir Oltean <olteanv@gmail.com>]

Management routes are one-shot FDB rules installed on the CPU port for
sending link-local traffic.  They are a prerequisite for STP, PTP etc to
work.

Also make a note that removing a management route was not supported on
the previous generation of switches.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
---
 .../net/dsa/sja1105/sja1105_dynamic_config.c  | 40 ++++++++++++++++++-
 drivers/net/dsa/sja1105/sja1105_main.c        |  2 +
 2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
index 02a67df4437e..352bb6e89297 100644
--- a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
+++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
@@ -161,6 +161,36 @@ static size_t sja1105et_mgmt_route_entry_packing(void *buf, void *entry_ptr,
 	return size;
 }
 
+static void
+sja1105pqrs_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
+				   enum packing_op op)
+{
+	u8 *p = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY;
+	u64 mgmtroute = 1;
+
+	sja1105pqrs_l2_lookup_cmd_packing(buf, cmd, op);
+	if (op == PACK)
+		sja1105_pack(p, &mgmtroute, 26, 26, SJA1105_SIZE_DYN_CMD);
+}
+
+static size_t sja1105pqrs_mgmt_route_entry_packing(void *buf, void *entry_ptr,
+						   enum packing_op op)
+{
+	const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY;
+	struct sja1105_mgmt_entry *entry = entry_ptr;
+
+	/* In P/Q/R/S, enfport got renamed to mgmtvalid, but its purpose
+	 * is the same (driver uses it to confirm that frame was sent).
+	 * So just keep the name from E/T.
+	 */
+	sja1105_packing(buf, &entry->tsreg,     71, 71, size, op);
+	sja1105_packing(buf, &entry->takets,    70, 70, size, op);
+	sja1105_packing(buf, &entry->macaddr,   69, 22, size, op);
+	sja1105_packing(buf, &entry->destports, 21, 17, size, op);
+	sja1105_packing(buf, &entry->enfport,   16, 16, size, op);
+	return size;
+}
+
 /* In E/T, entry is at addresses 0x27-0x28. There is a 4 byte gap at 0x29,
  * and command is at 0x2a. Similarly in P/Q/R/S there is a 1 register gap
  * between entry (0x2d, 0x2e) and command (0x30).
@@ -359,7 +389,7 @@ struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = {
 	[BLK_IDX_XMII_PARAMS] = {0},
 };
 
-/* SJA1105P/Q/R/S: Second generation: TODO */
+/* SJA1105P/Q/R/S: Second generation */
 struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN] = {
 	[BLK_IDX_L2_LOOKUP] = {
 		.entry_packing = sja1105pqrs_l2_lookup_entry_packing,
@@ -369,6 +399,14 @@ struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN] = {
 		.packed_size = SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD,
 		.addr = 0x24,
 	},
+	[BLK_IDX_MGMT_ROUTE] = {
+		.entry_packing = sja1105pqrs_mgmt_route_entry_packing,
+		.cmd_packing = sja1105pqrs_mgmt_route_cmd_packing,
+		.access = (OP_READ | OP_WRITE | OP_DEL | OP_SEARCH),
+		.max_entry_count = SJA1105_NUM_PORTS,
+		.packed_size = SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD,
+		.addr = 0x24,
+	},
 	[BLK_IDX_L2_POLICING] = {0},
 	[BLK_IDX_VLAN_LOOKUP] = {
 		.entry_packing = sja1105_vlan_lookup_entry_packing,
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index dc9803efdbbd..f9bbc780f835 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1475,6 +1475,8 @@ static int sja1105_mgmt_xmit(struct dsa_switch *ds, int port, int slot,
 	if (!timeout) {
 		/* Clean up the management route so that a follow-up
 		 * frame may not match on it by mistake.
+		 * This is only hardware supported on P/Q/R/S - on E/T it is
+		 * a no-op and we are silently discarding the -EOPNOTSUPP.
 		 */
 		sja1105_dynamic_config_write(priv, BLK_IDX_MGMT_ROUTE,
 					     slot, &mgmt_route, false);
-- 
2.17.1