All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Mark Brown <broonie@kernel.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Peter De Schrijver <pdeschrijver@nvidia.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 7/8] soc/tegra: regulators: Add regulators coupler for Tegra20
Date: Tue,  4 Jun 2019 02:59:03 +0300	[thread overview]
Message-ID: <20190603235904.19097-8-digetx@gmail.com> (raw)
In-Reply-To: <20190603235904.19097-1-digetx@gmail.com>

Add regulators coupler for Tegra20 SoC's that performs voltage balancing
of a coupled regulators and thus provides voltage scaling functionality.

There are 3 coupled regulators on all Tegra20 SoC's: CORE, RTC and CPU.
The CORE and RTC voltages shall be in range of 170mV from each other and
they both shall be higher than the CPU voltage by at least 120mV. This
sounds like it could be handle by a generic voltage balancer, but the CORE
voltage scaling isn't implemented in any of the upstream drivers yet.
It will take quite some time and effort to hook up voltage scaling for
all of the drivers, hence we will use a custom coupler that will manage
the CPU voltage scaling for the starter.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/soc/tegra/Kconfig              |   6 +
 drivers/soc/tegra/Makefile             |   1 +
 drivers/soc/tegra/regulators-tegra20.c | 348 +++++++++++++++++++++++++
 3 files changed, 355 insertions(+)
 create mode 100644 drivers/soc/tegra/regulators-tegra20.c

diff --git a/drivers/soc/tegra/Kconfig b/drivers/soc/tegra/Kconfig
index fbfce48ffb0d..4453c982c0b9 100644
--- a/drivers/soc/tegra/Kconfig
+++ b/drivers/soc/tegra/Kconfig
@@ -16,6 +16,7 @@ config ARCH_TEGRA_2x_SOC
 	select SOC_TEGRA_FLOWCTRL
 	select SOC_TEGRA_PMC
 	select TEGRA_TIMER
+	select SOC_TEGRA20_VOLTAGE_COUPLER if REGULATOR
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -134,3 +135,8 @@ config SOC_TEGRA_POWERGATE_BPMP
 	def_bool y
 	depends on PM_GENERIC_DOMAINS
 	depends on TEGRA_BPMP
+
+config SOC_TEGRA20_VOLTAGE_COUPLER
+	bool "Voltage scaling support for Tegra20 SoC's"
+	depends on ARCH_TEGRA_2x_SOC
+	depends on REGULATOR
diff --git a/drivers/soc/tegra/Makefile b/drivers/soc/tegra/Makefile
index 902759fe5f4d..9f0bdd53bef8 100644
--- a/drivers/soc/tegra/Makefile
+++ b/drivers/soc/tegra/Makefile
@@ -5,3 +5,4 @@ obj-y += common.o
 obj-$(CONFIG_SOC_TEGRA_FLOWCTRL) += flowctrl.o
 obj-$(CONFIG_SOC_TEGRA_PMC) += pmc.o
 obj-$(CONFIG_SOC_TEGRA_POWERGATE_BPMP) += powergate-bpmp.o
+obj-$(CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER) += regulators-tegra20.o
diff --git a/drivers/soc/tegra/regulators-tegra20.c b/drivers/soc/tegra/regulators-tegra20.c
new file mode 100644
index 000000000000..a64138f2e092
--- /dev/null
+++ b/drivers/soc/tegra/regulators-tegra20.c
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Voltage regulators coupling resolver for NVIDIA Tegra20
+ *
+ * Copyright (C) 2019 GRATE-DRIVER project
+ */
+
+#define pr_fmt(fmt)	"tegra voltage-coupler: " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+struct tegra_regulator_coupler {
+	struct regulator_coupler coupler;
+	struct regulator_dev *core_rdev;
+	struct regulator_dev *cpu_rdev;
+	struct regulator_dev *rtc_rdev;
+	int core_min_uV;
+};
+
+static inline struct tegra_regulator_coupler *
+to_tegra_coupler(struct regulator_coupler *coupler)
+{
+	return container_of(coupler, struct tegra_regulator_coupler, coupler);
+}
+
+static int tegra20_core_limit(struct tegra_regulator_coupler *tegra,
+			      struct regulator_dev *core_rdev)
+{
+	int core_min_uV = 0;
+	int core_max_uV;
+	int core_cur_uV;
+	int err;
+
+	if (tegra->core_min_uV > 0)
+		return tegra->core_min_uV;
+
+	core_cur_uV = regulator_get_voltage_rdev(core_rdev);
+	if (core_cur_uV < 0)
+		return core_cur_uV;
+
+	core_max_uV = max(core_cur_uV, 1200000);
+
+	err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV);
+	if (err)
+		return err;
+
+	/*
+	 * Limit minimum CORE voltage to a value left from bootloader or,
+	 * if it's unreasonably low value, to the most common 1.2v or to
+	 * whatever maximum value defined via board's device-tree.
+	 */
+	tegra->core_min_uV = core_max_uV;
+
+	pr_info("core minimum voltage limited to %duV\n", tegra->core_min_uV);
+
+	return tegra->core_min_uV;
+}
+
+static int tegra20_core_rtc_max_spread(struct regulator_dev *core_rdev,
+				       struct regulator_dev *rtc_rdev)
+{
+	struct coupling_desc *c_desc = &core_rdev->coupling_desc;
+	struct regulator_dev *rdev;
+	int max_spread;
+	unsigned int i;
+
+	for (i = 1; i < c_desc->n_coupled; i++) {
+		max_spread = core_rdev->constraints->max_spread[i - 1];
+		rdev = c_desc->coupled_rdevs[i];
+
+		if (rdev == rtc_rdev && max_spread)
+			return max_spread;
+	}
+
+	pr_err_once("rtc-core max-spread is undefined in device-tree\n");
+
+	return 150000;
+}
+
+static int tegra20_core_rtc_update(struct tegra_regulator_coupler *tegra,
+				   struct regulator_dev *core_rdev,
+				   struct regulator_dev *rtc_rdev,
+				   int cpu_uV, int cpu_min_uV)
+{
+	int core_min_uV, core_max_uV = INT_MAX;
+	int rtc_min_uV, rtc_max_uV = INT_MAX;
+	int core_target_uV;
+	int rtc_target_uV;
+	int max_spread;
+	int core_uV;
+	int rtc_uV;
+	int err;
+
+	/*
+	 * RTC and CORE voltages should be no more than 170mV from each other,
+	 * CPU should be below RTC and CORE by at least 120mV. This applies
+	 * to all Tegra20 SoC's.
+	 */
+	max_spread = tegra20_core_rtc_max_spread(core_rdev, rtc_rdev);
+
+	/*
+	 * The core voltage scaling is currently not hooked up in drivers,
+	 * hence we will limit the minimum core voltage to a reasonable value.
+	 * This should be good enough for the time being.
+	 */
+	core_min_uV = tegra20_core_limit(tegra, core_rdev);
+	if (core_min_uV < 0)
+		return core_min_uV;
+
+	err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV);
+	if (err)
+		return err;
+
+	err = regulator_check_consumers(core_rdev, &core_min_uV, &core_max_uV,
+					PM_SUSPEND_ON);
+	if (err)
+		return err;
+
+	core_min_uV = max(cpu_min_uV + 125000, core_min_uV);
+	if (core_min_uV > core_max_uV)
+		return -EINVAL;
+
+	core_uV = regulator_get_voltage_rdev(core_rdev);
+	if (core_uV < 0)
+		return core_uV;
+
+	if (cpu_uV + 120000 > core_uV)
+		pr_err("core-cpu voltage constraint violated: %d %d\n",
+		       core_uV, cpu_uV + 120000);
+
+	rtc_uV = regulator_get_voltage_rdev(rtc_rdev);
+	if (rtc_uV < 0)
+		return rtc_uV;
+
+	if (cpu_uV + 120000 > rtc_uV)
+		pr_err("rtc-cpu voltage constraint violated: %d %d\n",
+		       rtc_uV, cpu_uV + 120000);
+
+	if (abs(core_uV - rtc_uV) > 170000)
+		pr_err("core-rtc voltage constraint violated: %d %d\n",
+		       core_uV, rtc_uV);
+
+	rtc_min_uV = max(cpu_min_uV + 125000, core_min_uV - max_spread);
+
+	err = regulator_check_voltage(rtc_rdev, &rtc_min_uV, &rtc_max_uV);
+	if (err)
+		return err;
+
+	while (core_uV != core_min_uV || rtc_uV != rtc_min_uV) {
+		if (core_uV < core_min_uV) {
+			core_target_uV = min(core_uV + max_spread, core_min_uV);
+			core_target_uV = min(rtc_uV + max_spread, core_target_uV);
+		} else {
+			core_target_uV = max(core_uV - max_spread, core_min_uV);
+			core_target_uV = max(rtc_uV - max_spread, core_target_uV);
+		}
+
+		err = regulator_set_voltage_rdev(core_rdev,
+						 core_target_uV,
+						 core_max_uV,
+						 PM_SUSPEND_ON);
+		if (err)
+			return err;
+
+		core_uV = core_target_uV;
+
+		if (rtc_uV < rtc_min_uV) {
+			rtc_target_uV = min(rtc_uV + max_spread, rtc_min_uV);
+			rtc_target_uV = min(core_uV + max_spread, rtc_target_uV);
+		} else {
+			rtc_target_uV = max(rtc_uV - max_spread, rtc_min_uV);
+			rtc_target_uV = max(core_uV - max_spread, rtc_target_uV);
+		}
+
+		err = regulator_set_voltage_rdev(rtc_rdev,
+						 rtc_target_uV,
+						 rtc_max_uV,
+						 PM_SUSPEND_ON);
+		if (err)
+			return err;
+
+		rtc_uV = rtc_target_uV;
+	}
+
+	return 0;
+}
+
+static int tegra20_core_voltage_update(struct tegra_regulator_coupler *tegra,
+				       struct regulator_dev *cpu_rdev,
+				       struct regulator_dev *core_rdev,
+				       struct regulator_dev *rtc_rdev)
+{
+	int cpu_uV;
+
+	cpu_uV = regulator_get_voltage_rdev(cpu_rdev);
+	if (cpu_uV < 0)
+		return cpu_uV;
+
+	return tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev,
+				       cpu_uV, cpu_uV);
+}
+
+static int tegra20_cpu_voltage_update(struct tegra_regulator_coupler *tegra,
+				      struct regulator_dev *cpu_rdev,
+				      struct regulator_dev *core_rdev,
+				      struct regulator_dev *rtc_rdev)
+{
+	int cpu_max_uV = INT_MAX;
+	int cpu_min_uV = 0;
+	int cpu_uV;
+	int err;
+
+	err = regulator_check_voltage(cpu_rdev, &cpu_min_uV, &cpu_max_uV);
+	if (err)
+		return err;
+
+	err = regulator_check_consumers(cpu_rdev, &cpu_min_uV, &cpu_max_uV,
+					PM_SUSPEND_ON);
+	if (err)
+		return err;
+
+	cpu_uV = regulator_get_voltage_rdev(cpu_rdev);
+	if (cpu_uV < 0)
+		return cpu_uV;
+
+	if (cpu_min_uV > cpu_uV) {
+		err = tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev,
+					      cpu_uV, cpu_min_uV);
+		if (err)
+			return err;
+
+		err = regulator_set_voltage_rdev(cpu_rdev, cpu_min_uV,
+						 cpu_max_uV, PM_SUSPEND_ON);
+		if (err)
+			return err;
+	} else if (cpu_min_uV < cpu_uV)  {
+		err = regulator_set_voltage_rdev(cpu_rdev, cpu_min_uV,
+						 cpu_max_uV, PM_SUSPEND_ON);
+		if (err)
+			return err;
+
+		err = tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev,
+					      cpu_uV, cpu_min_uV);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int tegra20_regulator_balance_voltage(struct regulator_coupler *coupler,
+					     struct regulator_dev *rdev,
+					     suspend_state_t state)
+{
+	struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
+	struct regulator_dev *core_rdev = tegra->core_rdev;
+	struct regulator_dev *cpu_rdev = tegra->cpu_rdev;
+	struct regulator_dev *rtc_rdev = tegra->rtc_rdev;
+
+	if ((core_rdev != rdev && cpu_rdev != rdev && rtc_rdev != rdev) ||
+	    state != PM_SUSPEND_ON) {
+		pr_err("regulators are not coupled properly\n");
+		return -EINVAL;
+	}
+
+	if (rdev == cpu_rdev)
+		return tegra20_cpu_voltage_update(tegra, cpu_rdev,
+						  core_rdev, rtc_rdev);
+
+	if (rdev == core_rdev)
+		return tegra20_core_voltage_update(tegra, cpu_rdev,
+						   core_rdev, rtc_rdev);
+
+	pr_err("changing %s voltage not permitted\n", rdev_get_name(rtc_rdev));
+
+	return -EPERM;
+}
+
+static int tegra20_regulator_attach(struct regulator_coupler *coupler,
+				    struct regulator_dev *rdev)
+{
+	struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
+	struct device_node *np = rdev->dev.of_node;
+
+	if (of_property_read_bool(np, "nvidia,tegra-core-regulator") &&
+	    !tegra->core_rdev) {
+		tegra->core_rdev = rdev;
+		return 0;
+	}
+
+	if (of_property_read_bool(np, "nvidia,tegra-rtc-regulator") &&
+	    !tegra->rtc_rdev) {
+		tegra->rtc_rdev = rdev;
+		return 0;
+	}
+
+	if (of_property_read_bool(np, "nvidia,tegra-cpu-regulator") &&
+	    !tegra->cpu_rdev) {
+		tegra->cpu_rdev = rdev;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int tegra20_regulator_detach(struct regulator_coupler *coupler,
+				    struct regulator_dev *rdev)
+{
+	struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
+
+	if (tegra->core_rdev == rdev) {
+		tegra->core_rdev = NULL;
+		return 0;
+	}
+
+	if (tegra->rtc_rdev == rdev) {
+		tegra->rtc_rdev = NULL;
+		return 0;
+	}
+
+	if (tegra->cpu_rdev == rdev) {
+		tegra->cpu_rdev = NULL;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static struct tegra_regulator_coupler tegra20_coupler = {
+	.coupler = {
+		.attach_regulator = tegra20_regulator_attach,
+		.detach_regulator = tegra20_regulator_detach,
+		.balance_voltage = tegra20_regulator_balance_voltage,
+	},
+};
+
+static int __init tegra_regulator_coupler_init(void)
+{
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		return 0;
+
+	return regulator_coupler_register(&tegra20_coupler.coupler);
+}
+arch_initcall(tegra_regulator_coupler_init);
-- 
2.21.0

  parent reply	other threads:[~2019-06-03 23:59 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-03 23:58 [PATCH v2 0/8] Introduce customized regulators coupling Dmitry Osipenko
2019-06-03 23:58 ` [PATCH v2 1/8] regulator: core: Introduce API for regulators coupling customization Dmitry Osipenko
2019-06-17 15:23   ` Mark Brown
2019-06-18 16:25     ` Dmitry Osipenko
2019-06-03 23:58 ` [PATCH v2 2/8] regulator: core: Parse max-spread value per regulator couple Dmitry Osipenko
2019-06-17 15:25   ` Mark Brown
2019-06-18 16:27     ` Dmitry Osipenko
2019-06-03 23:58 ` [PATCH v2 3/8] regulator: core: Expose some of core functions Dmitry Osipenko
2019-06-17 15:32   ` Mark Brown
2019-06-18 16:29     ` Dmitry Osipenko
2019-06-03 23:59 ` [PATCH v2 4/8] regulator: core Bump MAX_COUPLED to 3 Dmitry Osipenko
2019-06-03 23:59 ` [PATCH v2 5/8] dt-bindings: regulator: Document regulators coupling of NVIDIA Tegra20/30 SoC's Dmitry Osipenko
2019-06-03 23:59 ` [PATCH v2 6/8] regulator: core: Don't attach generic coupler to Tegra SoC regulators Dmitry Osipenko
2019-06-17 15:44   ` Mark Brown
2019-06-18 16:47     ` Dmitry Osipenko
2019-06-03 23:59 ` Dmitry Osipenko [this message]
2019-06-17 15:46   ` [PATCH v2 7/8] soc/tegra: regulators: Add regulators coupler for Tegra20 Mark Brown
2019-06-18 16:52     ` Dmitry Osipenko
2019-06-18 17:14       ` Mark Brown
2019-06-18 17:19         ` Dmitry Osipenko
2019-06-03 23:59 ` [PATCH v2 8/8] soc/tegra: regulators: Add regulators coupler for Tegra30 Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190603235904.19097-8-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=pdeschrijver@nvidia.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.