From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, Jiri Slaby <jslaby@suse.cz>
Subject: Linux 4.14.124
Date: Sun, 9 Jun 2019 09:40:00 +0200 [thread overview]
Message-ID: <20190609074000.GA10361@kroah.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 12371 bytes --]
I'm announcing the release of the 4.14.124 kernel.
All users of the 4.14 kernel series must upgrade.
The updated 4.14.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-4.14.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Documentation/conf.py | 2
Documentation/sphinx/kerneldoc.py | 44 +-
Documentation/sphinx/kernellog.py | 28 +
Documentation/sphinx/kfigure.py | 40 +
Makefile | 2
arch/mips/kvm/mips.c | 3
arch/powerpc/kvm/book3s_xive.c | 4
arch/powerpc/kvm/powerpc.c | 3
arch/powerpc/perf/core-book3s.c | 6
arch/powerpc/perf/power8-pmu.c | 3
arch/powerpc/perf/power9-pmu.c | 3
arch/s390/kvm/kvm-s390.c | 1
arch/sparc/mm/ultra.S | 4
arch/x86/kernel/vmlinux.lds.S | 6
arch/x86/kvm/x86.c | 3
drivers/crypto/vmx/ghash.c | 213 ++++------
drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h | 2
drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.c | 26 +
drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.h | 2
drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c | 15
drivers/gpu/drm/nouveau/nvkm/subdev/i2c/bus.c | 21
drivers/gpu/drm/nouveau/nvkm/subdev/i2c/bus.h | 1
drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 9
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 8
drivers/media/usb/siano/smsusb.c | 33 -
drivers/media/usb/uvc/uvc_driver.c | 2
drivers/net/dsa/mv88e6xxx/chip.c | 2
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2
drivers/net/ethernet/freescale/fec_main.c | 2
drivers/net/ethernet/marvell/mvneta.c | 4
drivers/net/ethernet/marvell/mvpp2.c | 10
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 3
drivers/net/phy/marvell10g.c | 14
drivers/net/usb/usbnet.c | 6
drivers/s390/scsi/zfcp_ext.h | 1
drivers/s390/scsi/zfcp_scsi.c | 9
drivers/s390/scsi/zfcp_sysfs.c | 55 ++
drivers/s390/scsi/zfcp_unit.c | 8
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c | 9
drivers/staging/wlan-ng/hfa384x_usb.c | 3
drivers/tty/serial/max310x.c | 2
drivers/tty/serial/msm_serial.c | 5
drivers/tty/serial/sh-sci.c | 7
drivers/usb/core/config.c | 4
drivers/usb/core/quirks.c | 3
drivers/usb/host/xhci-ring.c | 17
drivers/usb/host/xhci.c | 24 -
drivers/usb/misc/rio500.c | 41 +
drivers/usb/misc/sisusbvga/sisusb.c | 15
drivers/usb/usbip/stub_dev.c | 75 ++-
drivers/xen/xen-pciback/pciback_ops.c | 2
fs/btrfs/inode.c | 14
fs/btrfs/send.c | 6
fs/btrfs/tree-log.c | 20
fs/cifs/file.c | 4
fs/lockd/xdr.c | 4
fs/lockd/xdr4.c | 4
include/linux/bitops.h | 16
include/linux/compiler-gcc.h | 4
include/linux/compiler_types.h | 4
include/linux/list_lru.h | 1
include/linux/module.h | 4
include/linux/siphash.h | 5
include/net/netns/ipv4.h | 2
include/uapi/linux/tipc_config.h | 10
kernel/signal.c | 2
mm/list_lru.c | 8
net/core/dev.c | 2
net/ipv4/igmp.c | 47 +-
net/ipv4/route.c | 12
net/ipv6/output_core.c | 30 -
net/ipv6/raw.c | 2
net/llc/llc_output.c | 2
net/tipc/core.c | 32 -
net/tipc/subscr.c | 14
net/tipc/subscr.h | 5
scripts/gcc-plugins/gcc-common.h | 4
security/integrity/ima/ima_policy.c | 21
sound/pci/hda/patch_realtek.c | 2
virt/kvm/arm/arm.c | 3
virt/kvm/kvm_main.c | 2
82 files changed, 727 insertions(+), 368 deletions(-)
Alan Stern (3):
USB: Fix slab-out-of-bounds write in usb_get_bos_descriptor
media: usb: siano: Fix general protection fault in smsusb
media: usb: siano: Fix false-positive "uninitialized variable" warning
Andrey Smirnov (1):
xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()
Andy Duan (1):
net: fec: fix the clk mismatch in failed_reset path
Antoine Tenart (1):
net: mvpp2: fix bad MVPP2_TXQ_SCHED_TOKEN_CNTR_REG queue value
Benjamin Coddington (1):
Revert "lockd: Show pid of lockd for remote locks"
Carsten Schmid (1):
usb: xhci: avoid null pointer deref when bos field is NULL
Chris Packham (1):
tipc: Avoid copying bytes beyond the supplied data
Cédric Le Goater (1):
KVM: PPC: Book3S HV: XIVE: Do not clear IRQ data of passthrough interrupts
Dan Carpenter (1):
staging: vc04_services: prevent integer overflow in create_pagelist()
Daniel Axtens (1):
crypto: vmx - ghash: do nosimd fallback manually
David S. Miller (1):
Revert "tipc: fix modprobe tipc failed after switch order of device registration"
Eric Dumazet (5):
inet: switch IP ID generator to siphash
llc: fix skb leak in llc_build_and_send_ui_pkt()
net-gro: fix use-after-free read in napi_gro_frags()
ipv4/igmp: fix another memory leak in igmpv3_del_delrec()
ipv4/igmp: fix build error if !CONFIG_IP_MULTICAST
Fabio Estevam (1):
xhci: Use %zu for printing size_t type
Filipe Manana (4):
Btrfs: fix wrong ctime and mtime of a directory after log replay
Btrfs: fix race updating log root item during fsync
Btrfs: fix fsync not persisting changed attributes of a directory
Btrfs: incremental send, fix file corruption when no-holes feature is enabled
George G. Davis (1):
serial: sh-sci: disable DMA for uart_console
Greg Kroah-Hartman (2):
Revert "x86/build: Move _etext to actual end of .text"
Linux 4.14.124
Henry Lin (1):
xhci: update bounce buffer with correct sg num
James Clarke (1):
sparc64: Fix regression in non-hypervisor TLB flush xcall
Jiri Slaby (1):
memcg: make it work on sparse non-0-node systems
Jisheng Zhang (2):
net: stmmac: fix reset gpio free missing
net: mvneta: Fix err code path of probe
Joe Burmeister (1):
tty: max310x: Fix external crystal register setup
Jonathan Corbet (3):
docs: Fix conf.py for Sphinx 2.0
doc: Cope with the deprecation of AutoReporter
doc: Cope with Sphinx logging deprecations
Jorge Ramirez-Ortiz (1):
tty: serial: msm_serial: Fix XON/XOFF
Junwei Hu (1):
tipc: fix modprobe tipc failed after switch order of device registration
Kailang Yang (1):
ALSA: hda/realtek - Set default power save node to 0
Kees Cook (1):
gcc-plugins: Fix build failures under Darwin host
Kloetzke Jan (1):
usbnet: fix kernel crash after disconnect
Konrad Rzeszutek Wilk (1):
xen/pciback: Don't disable PCI_COMMAND on PCI device reset.
Lyude Paul (1):
drm/nouveau/i2c: Disable i2c bus access after ->fini()
Mauro Carvalho Chehab (1):
media: smsusb: better handle optional alignment
Maximilian Luz (1):
USB: Add LPM quirk for Surface Dock GigE adapter
Michael Chan (1):
bnxt_en: Fix aggregation buffer leak under OOM condition.
Miguel Ojeda (2):
Compiler Attributes: add support for __copy (gcc >= 9)
include/linux/module.h: copy __init/__exit attrs to init/cleanup_module
Mike Manning (1):
ipv6: Consider sk_bound_dev_if when binding a raw socket to an address
Nadav Amit (1):
media: uvcvideo: Fix uvc_alloc_entity() allocation alignment
Oliver Neukum (3):
USB: sisusbvga: fix oops in error path of sisusb_probe
USB: rio500: refuse more than one device at a time
USB: rio500: fix memory leak in close after disconnect
Parav Pandit (1):
net/mlx5: Allocate root ns memory using kzalloc to match kfree
Rasmus Villemoes (2):
net: dsa: mv88e6xxx: fix handling of upper half of STATS_TYPE_PORT
include/linux/bitops.h: sanitize rotate primitives
Ravi Bangoria (1):
powerpc/perf: Fix MMCRA corruption by bhrb_filter
Roberto Bergantinos Corpas (1):
CIFS: cifs_read_allocate_pages: don't iterate through whole page array on ENOMEM
Roberto Sassu (1):
ima: show rules with IMA_INMASK correctly
Russell King (1):
net: phy: marvell10g: report if the PHY fails to boot firmware
Shuah Khan (2):
usbip: usbip_host: fix BUG: sleeping function called from invalid context
usbip: usbip_host: fix stub_dev lock context imbalance regression
Steffen Maier (2):
scsi: zfcp: fix missing zfcp_port reference put on -EBUSY from port_remove
scsi: zfcp: fix to prevent port_remove with pure auto scan LUNs (only sdevs)
Thomas Hellstrom (1):
drm/vmwgfx: Don't send drm sysfs hotplug events on initial master set
Thomas Huth (1):
KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID
Tim Collier (1):
staging: wlan-ng: fix adapter initialization failure
Todd Kjos (2):
Revert "binder: fix handling of misaligned binder object"
binder: fix race between munmap() and direct reclaim
Vicente Bergas (1):
drm/rockchip: shutdown drm subsystem on shutdown
Zhenliang Wei (1):
kernel/signal.c: trace_signal_deliver when signal_group_exit
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next reply other threads:[~2019-06-09 7:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-09 7:40 Greg KH [this message]
2019-06-09 7:40 ` Linux 4.14.124 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190609074000.GA10361@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.