* [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
@ 2019-06-11 5:42 ` Yuantian Tang
0 siblings, 0 replies; 9+ messages in thread
From: Yuantian Tang @ 2019-06-11 5:42 UTC (permalink / raw)
To: shawnguo
Cc: leoyang.li, robh+dt, mark.rutland, linux-arm-kernel, devicetree,
linux-kernel, Yuantian Tang
Add nxp sa56004 chip node for temperature monitor.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
v3:
- sort the node in i2c address
v2:
- change the node name and add vcc-supply
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 +++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15 +++++++++++++++
2 files changed, 30 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index b359068..960daf2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -47,6 +47,15 @@
regulator-always-on;
};
+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -117,6 +126,12 @@
#size-cells = <0>;
reg = <0x3>;
+ temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <&sb_3v3>;
+ };
+
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index f9c272f..6a22423 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -43,6 +43,15 @@
regulator-always-on;
};
+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -115,6 +124,12 @@
#size-cells = <0>;
reg = <0x3>;
+ temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <&sb_3v3>;
+ };
+
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
--
1.7.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
@ 2019-06-11 5:42 ` Yuantian Tang
0 siblings, 0 replies; 9+ messages in thread
From: Yuantian Tang @ 2019-06-11 5:42 UTC (permalink / raw)
To: shawnguo
Cc: mark.rutland, devicetree, Yuantian Tang, linux-kernel,
leoyang.li, robh+dt, linux-arm-kernel
Add nxp sa56004 chip node for temperature monitor.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
v3:
- sort the node in i2c address
v2:
- change the node name and add vcc-supply
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 +++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15 +++++++++++++++
2 files changed, 30 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index b359068..960daf2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -47,6 +47,15 @@
regulator-always-on;
};
+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -117,6 +126,12 @@
#size-cells = <0>;
reg = <0x3>;
+ temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <&sb_3v3>;
+ };
+
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index f9c272f..6a22423 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -43,6 +43,15 @@
regulator-always-on;
};
+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -115,6 +124,12 @@
#size-cells = <0>;
reg = <0x3>;
+ temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <&sb_3v3>;
+ };
+
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
--
1.7.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
2019-06-11 5:42 ` Yuantian Tang
(?)
@ 2019-06-13 2:51 ` Shawn Guo
-1 siblings, 0 replies; 9+ messages in thread
From: Shawn Guo @ 2019-06-13 2:51 UTC (permalink / raw)
To: Yuantian Tang
Cc: leoyang.li, robh+dt, mark.rutland, linux-arm-kernel, devicetree,
linux-kernel
On Tue, Jun 11, 2019 at 01:42:44PM +0800, Yuantian Tang wrote:
> Add nxp sa56004 chip node for temperature monitor.
>
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
@ 2019-06-13 2:51 ` Shawn Guo
0 siblings, 0 replies; 9+ messages in thread
From: Shawn Guo @ 2019-06-13 2:51 UTC (permalink / raw)
To: Yuantian Tang
Cc: mark.rutland, devicetree, linux-kernel, leoyang.li, robh+dt,
linux-arm-kernel
On Tue, Jun 11, 2019 at 01:42:44PM +0800, Yuantian Tang wrote:
> Add nxp sa56004 chip node for temperature monitor.
>
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
@ 2019-06-13 2:51 ` Shawn Guo
0 siblings, 0 replies; 9+ messages in thread
From: Shawn Guo @ 2019-06-13 2:51 UTC (permalink / raw)
To: Yuantian Tang
Cc: mark.rutland, devicetree, linux-kernel, leoyang.li, robh+dt,
linux-arm-kernel
On Tue, Jun 11, 2019 at 01:42:44PM +0800, Yuantian Tang wrote:
> Add nxp sa56004 chip node for temperature monitor.
>
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Applied, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
2019-08-06 5:30 ` Yuantian Tang
@ 2019-08-06 5:41 ` Andy Tang
-1 siblings, 0 replies; 9+ messages in thread
From: Andy Tang @ 2019-08-06 5:41 UTC (permalink / raw)
To: Andy Tang, shawnguo
Cc: Leo Li, robh+dt, mark.rutland, linux-arm-kernel, devicetree,
linux-kernel
Please ignore this email. Sorry for sending the wrong patch.
BR,
Andy
> -----Original Message-----
> From: Yuantian Tang <andy.tang@nxp.com>
> Sent: 2019年8月6日 13:30
> To: shawnguo@kernel.org
> Cc: Leo Li <leoyang.li@nxp.com>; robh+dt@kernel.org;
> mark.rutland@arm.com; linux-arm-kernel@lists.infradead.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; Andy Tang
> <andy.tang@nxp.com>
> Subject: [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
>
> Add nxp sa56004 chip node for temperature monitor.
>
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
> ---
> v3:
> - sort the node in i2c address
> v2:
> - change the node name and add vcc-supply
> arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15
> +++++++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15
> +++++++++++++++
> 2 files changed, 30 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index b359068..960daf2 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -47,6 +47,15 @@
> regulator-always-on;
> };
>
> + sb_3v3: regulator-sb3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3v3_vbus";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,format = "i2s";
> @@ -117,6 +126,12 @@
> #size-cells = <0>;
> reg = <0x3>;
>
> + temperature-sensor@4c {
> + compatible = "nxp,sa56004";
> + reg = <0x4c>;
> + vcc-supply = <&sb_3v3>;
> + };
> +
> rtc@51 {
> compatible = "nxp,pcf2129";
> reg = <0x51>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index f9c272f..6a22423 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -43,6 +43,15 @@
> regulator-always-on;
> };
>
> + sb_3v3: regulator-sb3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3v3_vbus";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,format = "i2s";
> @@ -115,6 +124,12 @@
> #size-cells = <0>;
> reg = <0x3>;
>
> + temperature-sensor@4c {
> + compatible = "nxp,sa56004";
> + reg = <0x4c>;
> + vcc-supply = <&sb_3v3>;
> + };
> +
> rtc@51 {
> compatible = "nxp,pcf2129";
> reg = <0x51>;
> --
> 1.7.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
@ 2019-08-06 5:41 ` Andy Tang
0 siblings, 0 replies; 9+ messages in thread
From: Andy Tang @ 2019-08-06 5:41 UTC (permalink / raw)
To: Andy Tang, shawnguo
Cc: mark.rutland, devicetree, linux-kernel, Leo Li, robh+dt,
linux-arm-kernel
Please ignore this email. Sorry for sending the wrong patch.
BR,
Andy
> -----Original Message-----
> From: Yuantian Tang <andy.tang@nxp.com>
> Sent: 2019年8月6日 13:30
> To: shawnguo@kernel.org
> Cc: Leo Li <leoyang.li@nxp.com>; robh+dt@kernel.org;
> mark.rutland@arm.com; linux-arm-kernel@lists.infradead.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; Andy Tang
> <andy.tang@nxp.com>
> Subject: [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
>
> Add nxp sa56004 chip node for temperature monitor.
>
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
> ---
> v3:
> - sort the node in i2c address
> v2:
> - change the node name and add vcc-supply
> arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15
> +++++++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15
> +++++++++++++++
> 2 files changed, 30 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index b359068..960daf2 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -47,6 +47,15 @@
> regulator-always-on;
> };
>
> + sb_3v3: regulator-sb3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3v3_vbus";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,format = "i2s";
> @@ -117,6 +126,12 @@
> #size-cells = <0>;
> reg = <0x3>;
>
> + temperature-sensor@4c {
> + compatible = "nxp,sa56004";
> + reg = <0x4c>;
> + vcc-supply = <&sb_3v3>;
> + };
> +
> rtc@51 {
> compatible = "nxp,pcf2129";
> reg = <0x51>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index f9c272f..6a22423 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -43,6 +43,15 @@
> regulator-always-on;
> };
>
> + sb_3v3: regulator-sb3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3v3_vbus";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,format = "i2s";
> @@ -115,6 +124,12 @@
> #size-cells = <0>;
> reg = <0x3>;
>
> + temperature-sensor@4c {
> + compatible = "nxp,sa56004";
> + reg = <0x4c>;
> + vcc-supply = <&sb_3v3>;
> + };
> +
> rtc@51 {
> compatible = "nxp,pcf2129";
> reg = <0x51>;
> --
> 1.7.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
@ 2019-08-06 5:30 ` Yuantian Tang
0 siblings, 0 replies; 9+ messages in thread
From: Yuantian Tang @ 2019-08-06 5:30 UTC (permalink / raw)
To: shawnguo
Cc: leoyang.li, robh+dt, mark.rutland, linux-arm-kernel, devicetree,
linux-kernel, Yuantian Tang
Add nxp sa56004 chip node for temperature monitor.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
v3:
- sort the node in i2c address
v2:
- change the node name and add vcc-supply
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 +++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15 +++++++++++++++
2 files changed, 30 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index b359068..960daf2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -47,6 +47,15 @@
regulator-always-on;
};
+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -117,6 +126,12 @@
#size-cells = <0>;
reg = <0x3>;
+ temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <&sb_3v3>;
+ };
+
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index f9c272f..6a22423 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -43,6 +43,15 @@
regulator-always-on;
};
+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -115,6 +124,12 @@
#size-cells = <0>;
reg = <0x3>;
+ temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <&sb_3v3>;
+ };
+
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
--
1.7.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
@ 2019-08-06 5:30 ` Yuantian Tang
0 siblings, 0 replies; 9+ messages in thread
From: Yuantian Tang @ 2019-08-06 5:30 UTC (permalink / raw)
To: shawnguo
Cc: mark.rutland, devicetree, Yuantian Tang, linux-kernel,
leoyang.li, robh+dt, linux-arm-kernel
Add nxp sa56004 chip node for temperature monitor.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
v3:
- sort the node in i2c address
v2:
- change the node name and add vcc-supply
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 +++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15 +++++++++++++++
2 files changed, 30 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index b359068..960daf2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -47,6 +47,15 @@
regulator-always-on;
};
+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -117,6 +126,12 @@
#size-cells = <0>;
reg = <0x3>;
+ temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <&sb_3v3>;
+ };
+
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index f9c272f..6a22423 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -43,6 +43,15 @@
regulator-always-on;
};
+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -115,6 +124,12 @@
#size-cells = <0>;
reg = <0x3>;
+ temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <&sb_3v3>;
+ };
+
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
--
1.7.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 9+ messages in thread
end of thread, other threads:[~2019-08-06 5:41 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-11 5:42 [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node Yuantian Tang
2019-06-11 5:42 ` Yuantian Tang
2019-06-13 2:51 ` Shawn Guo
2019-06-13 2:51 ` Shawn Guo
2019-06-13 2:51 ` Shawn Guo
2019-08-06 5:30 Yuantian Tang
2019-08-06 5:30 ` Yuantian Tang
2019-08-06 5:41 ` Andy Tang
2019-08-06 5:41 ` Andy Tang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.