From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bartosz Golaszewski Date: Mon, 24 Jun 2019 16:21:49 +0200 Subject: [U-Boot] [PATCH v2] net: davinci_emac: convert to using the driver model Message-ID: <20190624142149.15189-1-brgl@bgdev.pl> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Bartosz Golaszewski Now that we removed all legacy boards selecting TI_EMAC we can completely convert the driver code to using the driver model. This patch also updates all remaining users of davinci_emac. Signed-off-by: Bartosz Golaszewski --- v1 -> v2: - moved the packetp assignment to the top of the recv() callback which fixes a crash on am3517_evm - dropped a redundant call to net_process_received_packet(): this is already called from eth core Thanks goes to Adam Ford for much appreciated testing and help. Tested on da850-lcdk and da850-evm. arch/arm/mach-davinci/cpu.c | 13 ----- arch/arm/mach-omap2/omap3/emac.c | 3 +- board/davinci/da8xxevm/da850evm.c | 6 -- board/davinci/da8xxevm/omapl138_lcdk.c | 14 ----- board/logicpd/am3517evm/am3517evm.c | 1 - board/ti/ti816x/evm.c | 3 +- configs/am3517_evm_defconfig | 1 + configs/da850evm_defconfig | 1 + configs/da850evm_direct_nor_defconfig | 1 + configs/da850evm_nand_defconfig | 1 + configs/omapl138_lcdk_defconfig | 1 + configs/ti816x_evm_defconfig | 1 + drivers/net/ti/davinci_emac.c | 77 ++++++++++++++------------ include/netdev.h | 1 - 14 files changed, 50 insertions(+), 74 deletions(-) diff --git a/arch/arm/mach-davinci/cpu.c b/arch/arm/mach-davinci/cpu.c index f97ad3fc74..9fd6564d04 100644 --- a/arch/arm/mach-davinci/cpu.c +++ b/arch/arm/mach-davinci/cpu.c @@ -5,7 +5,6 @@ */ #include -#include #include #include @@ -90,15 +89,3 @@ int set_cpu_clk_info(void) gd->bd->bi_dsp_freq = 0; return 0; } - -/* - * Initializes on-chip ethernet controllers. - * to override, implement board_eth_init() - */ -int cpu_eth_init(bd_t *bis) -{ -#if defined(CONFIG_DRIVER_TI_EMAC) - davinci_emac_initialize(); -#endif - return 0; -} diff --git a/arch/arm/mach-omap2/omap3/emac.c b/arch/arm/mach-omap2/omap3/emac.c index c79e870183..fb0c9188f5 100644 --- a/arch/arm/mach-omap2/omap3/emac.c +++ b/arch/arm/mach-omap2/omap3/emac.c @@ -7,7 +7,6 @@ */ #include -#include #include #include @@ -24,5 +23,5 @@ int cpu_eth_init(bd_t *bis) reset &= ~CPGMACSS_SW_RST; writel(reset, &am35x_scm_general_regs->ip_sw_reset); - return davinci_emac_initialize(); + return 0; } diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index a90b7a3538..a5c583444d 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -472,11 +471,6 @@ int board_eth_init(bd_t *bis) if (rmii_hw_init()) printf("RMII hardware init failed!!!\n"); #endif - if (!davinci_emac_initialize()) { - printf("Error: Ethernet init failed!\n"); - return -1; - } - return 0; } #endif /* CONFIG_DRIVER_TI_EMAC */ diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c index fe1bf44101..dd11551428 100644 --- a/board/davinci/da8xxevm/omapl138_lcdk.c +++ b/board/davinci/da8xxevm/omapl138_lcdk.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -229,19 +228,6 @@ int board_init(void) #ifdef CONFIG_DRIVER_TI_EMAC -/* - * Initializes on-board ethernet controllers. - */ -int board_eth_init(bd_t *bis) -{ - if (!davinci_emac_initialize()) { - printf("Error: Ethernet init failed!\n"); - return -1; - } - - return 0; -} - #endif /* CONFIG_DRIVER_TI_EMAC */ #define CFG_MAC_ADDR_SPI_BUS 0 diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c index 10031a4801..bfd4e78274 100644 --- a/board/logicpd/am3517evm/am3517evm.c +++ b/board/logicpd/am3517evm/am3517evm.c @@ -28,7 +28,6 @@ #include #include #include -#include #include "am3517evm.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c index 07a084bab8..240df8cbe1 100644 --- a/board/ti/ti816x/evm.c +++ b/board/ti/ti816x/evm.c @@ -9,7 +9,6 @@ #include #include #include -#include #include #include #include @@ -56,7 +55,7 @@ int board_eth_init(bd_t *bis) printf("Unable to read MAC address. Set \n"); } - return davinci_emac_initialize(); + return 0; } #ifdef CONFIG_SPL_BUILD diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index b9f59f3291..5cb76322df 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -44,6 +44,7 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 CONFIG_SPL_NAND_SIMPLE=y +CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DRIVER_TI_EMAC=y CONFIG_PINCTRL=y diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig index c095058282..f7c679d3b5 100644 --- a/configs/da850evm_defconfig +++ b/configs/da850evm_defconfig @@ -59,6 +59,7 @@ CONFIG_SF_DEFAULT_SPEED=30000000 CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SPI_FLASH_MTD=y +CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DRIVER_TI_EMAC=y CONFIG_PINCTRL=y diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig index 166e77b8e3..9b1da07384 100644 --- a/configs/da850evm_direct_nor_defconfig +++ b/configs/da850evm_direct_nor_defconfig @@ -50,6 +50,7 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DRIVER_TI_EMAC=y CONFIG_PINCTRL=y diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig index 7271016346..8f06b8592b 100644 --- a/configs/da850evm_nand_defconfig +++ b/configs/da850evm_nand_defconfig @@ -59,6 +59,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SPI_FLASH_MTD=y +CONFIG_DM_ETH=y CONFIG_PINCTRL=y CONFIG_PINCTRL_SINGLE=y CONFIG_DM_SERIAL=y diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index 48f251ebb8..466ae860cd 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -49,6 +49,7 @@ CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DRIVER_TI_EMAC=y CONFIG_DM_SERIAL=y diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig index bf877f596b..b233ab8cc9 100644 --- a/configs/ti816x_evm_defconfig +++ b/configs/ti816x_evm_defconfig @@ -45,6 +45,7 @@ CONFIG_SYS_I2C_OMAP24XX=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y CONFIG_SYS_NAND_BUSWIDTH_16BIT=y +CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DRIVER_TI_EMAC=y CONFIG_SYS_NS16550=y diff --git a/drivers/net/ti/davinci_emac.c b/drivers/net/ti/davinci_emac.c index 9d53984973..2bd9c51079 100644 --- a/drivers/net/ti/davinci_emac.c +++ b/drivers/net/ti/davinci_emac.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include @@ -107,8 +106,9 @@ static u_int8_t num_phy; phy_t phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT]; -static int davinci_eth_set_mac_addr(struct eth_device *dev) +static int davinci_emac_write_hwaddr(struct udevice *dev) { + struct eth_pdata *pdata = dev_get_platdata(dev); unsigned long mac_hi; unsigned long mac_lo; @@ -118,12 +118,12 @@ static int davinci_eth_set_mac_addr(struct eth_device *dev) * Using channel 0 only - other channels are disabled * */ writel(0, &adap_emac->MACINDEX); - mac_hi = (dev->enetaddr[3] << 24) | - (dev->enetaddr[2] << 16) | - (dev->enetaddr[1] << 8) | - (dev->enetaddr[0]); - mac_lo = (dev->enetaddr[5] << 8) | - (dev->enetaddr[4]); + mac_hi = (pdata->enetaddr[3] << 24) | + (pdata->enetaddr[2] << 16) | + (pdata->enetaddr[1] << 8) | + (pdata->enetaddr[0]); + mac_lo = (pdata->enetaddr[5] << 8) | + (pdata->enetaddr[4]); writel(mac_hi, &adap_emac->MACADDRHI); #if defined(DAVINCI_EMAC_VERSION2) @@ -411,7 +411,7 @@ static void __attribute__((unused)) davinci_eth_gigabit_enable(int phy_addr) } /* Eth device open */ -static int davinci_eth_open(struct eth_device *dev, bd_t *bis) +static int davinci_emac_start(struct udevice *dev) { dv_reg_p addr; u_int32_t clkdiv, cnt, mac_control; @@ -447,7 +447,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis) writel(1, &adap_emac->TXCONTROL); writel(1, &adap_emac->RXCONTROL); - davinci_eth_set_mac_addr(dev); + davinci_emac_write_hwaddr(dev); /* Set DMA 8 TX / 8 RX Head pointers to 0 */ addr = &adap_emac->TX0HDP; @@ -588,7 +588,7 @@ static void davinci_eth_ch_teardown(int ch) } /* Eth device close */ -static void davinci_eth_close(struct eth_device *dev) +static void davinci_emac_stop(struct udevice *dev) { debug_emac("+ emac_close\n"); @@ -619,8 +619,8 @@ static int tx_send_loop = 0; * This function sends a single packet on the network and returns * positive number (number of bytes transmitted) or negative for error */ -static int davinci_eth_send_packet (struct eth_device *dev, - void *packet, int length) +static int davinci_emac_send(struct udevice *dev, + void *packet, int length) { int ret_status = -1; int index; @@ -672,7 +672,7 @@ static int davinci_eth_send_packet (struct eth_device *dev, /* * This function handles receipt of a packet from the network */ -static int davinci_eth_rcv_packet (struct eth_device *dev) +static int davinci_emac_recv(struct udevice *dev, int flags, uchar **packetp) { volatile emac_desc *rx_curr_desc; volatile emac_desc *curr_desc; @@ -682,6 +682,7 @@ static int davinci_eth_rcv_packet (struct eth_device *dev) rx_curr_desc = emac_rx_active_head; if (!rx_curr_desc) return 0; + *packetp = rx_curr_desc->buffer; status = rx_curr_desc->pkt_flag_len; if ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0) { if (status & EMAC_CPPI_RX_ERROR_FRAME) { @@ -693,7 +694,6 @@ static int davinci_eth_rcv_packet (struct eth_device *dev) rx_curr_desc->buff_off_len & 0xffff; invalidate_dcache_range(tmp, tmp + ALIGN(len, PKTALIGN)); - net_process_received_packet(rx_curr_desc->buffer, len); ret = len; } @@ -742,6 +742,7 @@ static int davinci_eth_rcv_packet (struct eth_device *dev) } return (ret); } + return (0); } @@ -750,30 +751,12 @@ static int davinci_eth_rcv_packet (struct eth_device *dev) * EMAC modules power or pin multiplexors, that is done by board_init() * much earlier in bootup process. Returns 1 on success, 0 otherwise. */ -int davinci_emac_initialize(void) +static int davinci_emac_probe(struct udevice *dev) { u_int32_t phy_id; u_int16_t tmp; int i; int ret; - struct eth_device *dev; - - dev = malloc(sizeof *dev); - - if (dev == NULL) - return -1; - - memset(dev, 0, sizeof *dev); - strcpy(dev->name, "DaVinci-EMAC"); - - dev->iobase = 0; - dev->init = davinci_eth_open; - dev->halt = davinci_eth_close; - dev->send = davinci_eth_send_packet; - dev->recv = davinci_eth_rcv_packet; - dev->write_hwaddr = davinci_eth_set_mac_addr; - - eth_register(dev); davinci_eth_mdio_enable(); @@ -854,5 +837,29 @@ int davinci_emac_initialize(void) phy[i].auto_negotiate(i); } #endif - return(1); + return 0; } + +static const struct eth_ops davinci_emac_ops = { + .start = davinci_emac_start, + .send = davinci_emac_send, + .recv = davinci_emac_recv, + .stop = davinci_emac_stop, + .write_hwaddr = davinci_emac_write_hwaddr, +}; + +static const struct udevice_id davinci_emac_ids[] = { + { .compatible = "ti,davinci-dm6467-emac" }, + { .compatible = "ti,am3517-emac", }, + { .compatible = "ti,dm816-emac", }, + { } +}; + +U_BOOT_DRIVER(davinci_emac) = { + .name = "davinci_emac", + .id = UCLASS_ETH, + .of_match = davinci_emac_ids, + .probe = davinci_emac_probe, + .ops = &davinci_emac_ops, + .platdata_auto_alloc_size = sizeof(struct eth_pdata), +}; diff --git a/include/netdev.h b/include/netdev.h index 0a1a3a2d8d..a40c4adaad 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -30,7 +30,6 @@ int bcm_sf2_eth_register(bd_t *bis, u8 dev_num); int bfin_EMAC_initialize(bd_t *bis); int calxedaxgmac_initialize(u32 id, ulong base_addr); int cs8900_initialize(u8 dev_num, int base_addr); -int davinci_emac_initialize(void); int dc21x4x_initialize(bd_t *bis); int designware_initialize(ulong base_addr, u32 interface); int dm9000_initialize(bd_t *bis); -- 2.21.0