[PATCH AUTOSEL 4.9 01/11] ASoC : cs4265 : readable register too low

[PATCH AUTOSEL 4.9 01/11] ASoC : cs4265 : readable register too low

[Sasha Levin]

From: Matt Flax <flatmax@flatmax.org>

[ Upstream commit f3df05c805983427319eddc2411a2105ee1757cf ]

The cs4265_readable_register function stopped short of the maximum
register.

An example bug is taken from :
https://github.com/Audio-Injector/Ultra/issues/25

Where alsactl store fails with :
Cannot read control '2,0,0,C Data Buffer,0': Input/output error

This patch fixes the bug by setting the cs4265 to have readable
registers up to the maximum hardware register CS4265_MAX_REGISTER.

Signed-off-by: Matt Flax <flatmax@flatmax.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs4265.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs4265.c b/sound/soc/codecs/cs4265.c
index 6e8eb1f5a041..bed64723e5d9 100644
--- a/sound/soc/codecs/cs4265.c
+++ b/sound/soc/codecs/cs4265.c
@@ -60,7 +60,7 @@ static const struct reg_default cs4265_reg_defaults[] = {
 static bool cs4265_readable_register(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
-	case CS4265_CHIP_ID ... CS4265_SPDIF_CTL2:
+	case CS4265_CHIP_ID ... CS4265_MAX_REGISTER:
 		return true;
 	default:
 		return false;
-- 
2.20.1

[PATCH AUTOSEL 4.9 02/11] ASoC: soc-pcm: BE dai needs prepare when pause release after resume

[Sasha Levin]

From: Libin Yang <libin.yang@intel.com>

[ Upstream commit 5087a8f17df868601cd7568299e91c28086d2b45 ]

If playback/capture is paused and system enters S3, after system returns
from suspend, BE dai needs to call prepare() callback when playback/capture
is released from pause if RESUME_INFO flag is not set.

Currently, the dpcm_be_dai_prepare() function will block calling prepare()
if the pcm is in SND_SOC_DPCM_STATE_PAUSED state. This will cause the
following test case fail if the pcm uses BE:

playback -> pause -> S3 suspend -> S3 resume -> pause release

The playback may exit abnormally when pause is released because the BE dai
prepare() is not called.

This patch allows dpcm_be_dai_prepare() to call dai prepare() callback in
SND_SOC_DPCM_STATE_PAUSED state.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-pcm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 1dbcdc99dbe3..1d00f6e894ef 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -2247,7 +2247,8 @@ int dpcm_be_dai_prepare(struct snd_soc_pcm_runtime *fe, int stream)
 
 		if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_HW_PARAMS) &&
 		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP) &&
-		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_SUSPEND))
+		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_SUSPEND) &&
+		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED))
 			continue;
 
 		dev_dbg(be->dev, "ASoC: prepare BE %s\n",
-- 
2.20.1

[PATCH AUTOSEL 4.9 03/11] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 5caaf29af5ca82d5da8bc1d0ad07d9e664ccf1d8 ]

If spi_register_master fails in spi_bitbang_start
because device_add failure, We should return the
error code other than 0, otherwise calling
spi_bitbang_stop may trigger NULL pointer dereference
like this:

BUG: KASAN: null-ptr-deref in __list_del_entry_valid+0x45/0xd0
Read of size 8 at addr 0000000000000000 by task syz-executor.0/3661

CPU: 0 PID: 3661 Comm: syz-executor.0 Not tainted 5.1.0+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 dump_stack+0xa9/0x10e
 ? __list_del_entry_valid+0x45/0xd0
 ? __list_del_entry_valid+0x45/0xd0
 __kasan_report+0x171/0x18d
 ? __list_del_entry_valid+0x45/0xd0
 kasan_report+0xe/0x20
 __list_del_entry_valid+0x45/0xd0
 spi_unregister_controller+0x99/0x1b0
 spi_lm70llp_attach+0x3ae/0x4b0 [spi_lm70llp]
 ? 0xffffffffc1128000
 ? klist_next+0x131/0x1e0
 ? driver_detach+0x40/0x40 [parport]
 port_check+0x3b/0x50 [parport]
 bus_for_each_dev+0x115/0x180
 ? subsys_dev_iter_exit+0x20/0x20
 __parport_register_driver+0x1f0/0x210 [parport]
 ? 0xffffffffc1150000
 do_one_initcall+0xb9/0x3b5
 ? perf_trace_initcall_level+0x270/0x270
 ? kasan_unpoison_shadow+0x30/0x40
 ? kasan_unpoison_shadow+0x30/0x40
 do_init_module+0xe0/0x330
 load_module+0x38eb/0x4270
 ? module_frob_arch_sections+0x20/0x20
 ? kernel_read_file+0x188/0x3f0
 ? find_held_lock+0x6d/0xd0
 ? fput_many+0x1a/0xe0
 ? __do_sys_finit_module+0x162/0x190
 __do_sys_finit_module+0x162/0x190
 ? __ia32_sys_init_module+0x40/0x40
 ? __mutex_unlock_slowpath+0xb4/0x3f0
 ? wait_for_completion+0x240/0x240
 ? vfs_write+0x160/0x2a0
 ? lockdep_hardirqs_off+0xb5/0x100
 ? mark_held_locks+0x1a/0x90
 ? do_syscall_64+0x14/0x2a0
 do_syscall_64+0x72/0x2a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 702a4879ec33 ("spi: bitbang: Let spi_bitbang_start() take a reference to master")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-bitbang.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index 3aa9e6e3dac8..4ef54436b9d4 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -392,7 +392,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
 	if (ret)
 		spi_master_put(master);
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(spi_bitbang_start);
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 04/11] ASoC: sun4i-codec: fix first delay on Speaker

[Sasha Levin]

From: Georgii Staroselskii <georgii.staroselskii@emlid.com>

[ Upstream commit 1f2675f6655838aaf910f911fd0abc821e3ff3df ]

Allwinner DAC seems to have a delay in the Speaker audio routing. When
playing a sound for the first time, the sound gets chopped. On a second
play the sound is played correctly. After some time (~5s) the issue gets
back.

This commit seems to be fixing the same issue as bf14da7 but
for another codepath.

This is the DTS that was used to debug the problem.

&codec {
        allwinner,pa-gpios = <&r_pio 0 11 GPIO_ACTIVE_HIGH>; /* PL11 */
        allwinner,audio-routing =
                "Speaker", "LINEOUT";

        status = "okay";
}

Signed-off-by: Georgii Staroselskii <georgii.staroselskii@emlid.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sunxi/sun4i-codec.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 56ed9472e89f..6099adea68c6 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -747,6 +747,15 @@ static int sun4i_codec_spk_event(struct snd_soc_dapm_widget *w,
 		gpiod_set_value_cansleep(scodec->gpio_pa,
 					 !!SND_SOC_DAPM_EVENT_ON(event));
 
+	if (SND_SOC_DAPM_EVENT_ON(event)) {
+		/*
+		 * Need a delay to wait for DAC to push the data. 700ms seems
+		 * to be the best compromise not to feel this delay while
+		 * playing a sound.
+		 */
+		msleep(700);
+	}
+
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 05/11] drm/mediatek: fix unbind functions

[Sasha Levin]

From: Hsin-Yi Wang <hsinyi@chromium.org>

[ Upstream commit 8fd7a37b191f93737f6280a9b5de65f98acc12c9 ]

detatch panel in mtk_dsi_destroy_conn_enc(), since .bind will try to
attach it again.

Fixes: 2e54c14e310f ("drm/mediatek: Add DSI sub driver")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index eaa5a2240c0c..bdbf358697cd 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -720,6 +720,8 @@ static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi)
 	/* Skip connector cleanup if creation was delegated to the bridge */
 	if (dsi->conn.dev)
 		drm_connector_cleanup(&dsi->conn);
+	if (dsi->panel)
+		drm_panel_detach(dsi->panel);
 }
 
 static void mtk_dsi_ddp_start(struct mtk_ddp_comp *comp)
-- 
2.20.1

[PATCH AUTOSEL 4.9 05/11] drm/mediatek: fix unbind functions

[Sasha Levin]

From: Hsin-Yi Wang <hsinyi@chromium.org>

[ Upstream commit 8fd7a37b191f93737f6280a9b5de65f98acc12c9 ]

detatch panel in mtk_dsi_destroy_conn_enc(), since .bind will try to
attach it again.

Fixes: 2e54c14e310f ("drm/mediatek: Add DSI sub driver")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index eaa5a2240c0c..bdbf358697cd 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -720,6 +720,8 @@ static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi)
 	/* Skip connector cleanup if creation was delegated to the bridge */
 	if (dsi->conn.dev)
 		drm_connector_cleanup(&dsi->conn);
+	if (dsi->panel)
+		drm_panel_detach(dsi->panel);
 }
 
 static void mtk_dsi_ddp_start(struct mtk_ddp_comp *comp)
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.9 06/11] ASoC: max98090: remove 24-bit format support if RJ is 0

[Sasha Levin]

From: Yu-Hsuan Hsu <yuhsuan@chromium.org>

[ Upstream commit 5628c8979642a076f91ee86c3bae5ad251639af0 ]

The supported formats are S16_LE and S24_LE now. However, by datasheet
of max98090, S24_LE is only supported when it is in the right justified
mode. We should remove 24-bit format if it is not in that mode to avoid
triggering error.

Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index 3e65dc74eb33..e7aef841f87d 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -1924,6 +1924,21 @@ static int max98090_configure_dmic(struct max98090_priv *max98090,
 	return 0;
 }
 
+static int max98090_dai_startup(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct max98090_priv *max98090 = snd_soc_component_get_drvdata(component);
+	unsigned int fmt = max98090->dai_fmt;
+
+	/* Remove 24-bit format support if it is not in right justified mode. */
+	if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_RIGHT_J) {
+		substream->runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;
+		snd_pcm_hw_constraint_msbits(substream->runtime, 0, 16, 16);
+	}
+	return 0;
+}
+
 static int max98090_dai_hw_params(struct snd_pcm_substream *substream,
 				   struct snd_pcm_hw_params *params,
 				   struct snd_soc_dai *dai)
@@ -2331,6 +2346,7 @@ EXPORT_SYMBOL_GPL(max98090_mic_detect);
 #define MAX98090_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE)
 
 static const struct snd_soc_dai_ops max98090_dai_ops = {
+	.startup = max98090_dai_startup,
 	.set_sysclk = max98090_dai_set_sysclk,
 	.set_fmt = max98090_dai_set_fmt,
 	.set_tdm_slot = max98090_set_tdm_slot,
-- 
2.20.1

[PATCH AUTOSEL 4.9 07/11] usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]

[Sasha Levin]

From: Young Xiao <92siuyang@gmail.com>

[ Upstream commit 62fd0e0a24abeebe2c19fce49dd5716d9b62042d ]

There is no deallocation of fusb300->ep[i] elements, allocated at
fusb300_probe.

The patch adds deallocation of fusb300->ep array elements.

Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/fusb300_udc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c
index 948845c90e47..351012c498c5 100644
--- a/drivers/usb/gadget/udc/fusb300_udc.c
+++ b/drivers/usb/gadget/udc/fusb300_udc.c
@@ -1345,12 +1345,15 @@ static const struct usb_gadget_ops fusb300_gadget_ops = {
 static int fusb300_remove(struct platform_device *pdev)
 {
 	struct fusb300 *fusb300 = platform_get_drvdata(pdev);
+	int i;
 
 	usb_del_gadget_udc(&fusb300->gadget);
 	iounmap(fusb300->reg);
 	free_irq(platform_get_irq(pdev, 0), fusb300);
 
 	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
+	for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+		kfree(fusb300->ep[i]);
 	kfree(fusb300);
 
 	return 0;
@@ -1494,6 +1497,8 @@ static int fusb300_probe(struct platform_device *pdev)
 		if (fusb300->ep0_req)
 			fusb300_free_request(&fusb300->ep[0]->ep,
 				fusb300->ep0_req);
+		for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+			kfree(fusb300->ep[i]);
 		kfree(fusb300);
 	}
 	if (reg)
-- 
2.20.1

[PATCH AUTOSEL 4.9 08/11] usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit fbc318afadd6e7ae2252d6158cf7d0c5a2132f7d ]

Gadget drivers may queue request in interrupt context. This would lead to
a descriptor allocation in that context. In that case we would hit
BUG_ON(in_interrupt()) in __get_vm_area_node.

Also remove the unnecessary cast.

Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Tested-by: James Grant <jamesg@zaltys.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/lpc32xx_udc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 8f32b5ee7734..6df1aded4503 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -935,8 +935,7 @@ static struct lpc32xx_usbd_dd_gad *udc_dd_alloc(struct lpc32xx_udc *udc)
 	dma_addr_t			dma;
 	struct lpc32xx_usbd_dd_gad	*dd;
 
-	dd = (struct lpc32xx_usbd_dd_gad *) dma_pool_alloc(
-			udc->dd_cache, (GFP_KERNEL | GFP_DMA), &dma);
+	dd = dma_pool_alloc(udc->dd_cache, GFP_ATOMIC | GFP_DMA, &dma);
 	if (dd)
 		dd->this_dma = dma;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 09/11] scsi: hpsa: correct ioaccel2 chaining

[Sasha Levin]

From: Don Brace <don.brace@microsemi.com>

[ Upstream commit 625d7d3518875c4d303c652a198feaa13d9f52d9 ]

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_LAST_SG for
  the last s/g element.

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_CHAIN when
  chaining.

Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Matt Perricone <matt.perricone@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hpsa.c     | 7 ++++++-
 drivers/scsi/hpsa_cmd.h | 1 +
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 0b8db8a74d50..9f98c7211ec2 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4815,7 +4815,7 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
 			curr_sg->reserved[0] = 0;
 			curr_sg->reserved[1] = 0;
 			curr_sg->reserved[2] = 0;
-			curr_sg->chain_indicator = 0x80;
+			curr_sg->chain_indicator = IOACCEL2_CHAIN;
 
 			curr_sg = h->ioaccel2_cmd_sg_list[c->cmdindex];
 		}
@@ -4832,6 +4832,11 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
 			curr_sg++;
 		}
 
+		/*
+		 * Set the last s/g element bit
+		 */
+		(curr_sg - 1)->chain_indicator = IOACCEL2_LAST_SG;
+
 		switch (cmd->sc_data_direction) {
 		case DMA_TO_DEVICE:
 			cp->direction &= ~IOACCEL2_DIRECTION_MASK;
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 5961705eef76..39bcbec93c60 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -516,6 +516,7 @@ struct ioaccel2_sg_element {
 	u8 reserved[3];
 	u8 chain_indicator;
 #define IOACCEL2_CHAIN 0x80
+#define IOACCEL2_LAST_SG 0x40
 };
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 4.9 10/11] scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE

[Sasha Levin]

From: Manuel Traut <manut@linutronix.de>

[ Upstream commit c04e32e911653442fc834be6e92e072aeebe01a1 ]

At least for ARM64 kernels compiled with the crosstoolchain from
Debian/stretch or with the toolchain from kernel.org the line number is
not decoded correctly by 'decode_stacktrace.sh':

  $ echo "[  136.513051]  f1+0x0/0xc [kcrash]" | \
    CROSS_COMPILE=/opt/gcc-8.1.0-nolibc/aarch64-linux/bin/aarch64-linux- \
   ./scripts/decode_stacktrace.sh /scratch/linux-arm64/vmlinux \
                                  /scratch/linux-arm64 \
                                  /nfs/debian/lib/modules/4.20.0-devel
  [  136.513051] f1 (/linux/drivers/staging/kcrash/kcrash.c:68) kcrash

If addr2line from the toolchain is used the decoded line number is correct:

  [  136.513051] f1 (/linux/drivers/staging/kcrash/kcrash.c:57) kcrash

Link: http://lkml.kernel.org/r/20190527083425.3763-1-manut@linutronix.de
Signed-off-by: Manuel Traut <manut@linutronix.de>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/decode_stacktrace.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/decode_stacktrace.sh b/scripts/decode_stacktrace.sh
index edde8250195c..381acfc4c59d 100755
--- a/scripts/decode_stacktrace.sh
+++ b/scripts/decode_stacktrace.sh
@@ -65,7 +65,7 @@ parse_symbol() {
 	if [[ "${cache[$module,$address]+isset}" == "isset" ]]; then
 		local code=${cache[$module,$address]}
 	else
-		local code=$(addr2line -i -e "$objfile" "$address")
+		local code=$(${CROSS_COMPILE}addr2line -i -e "$objfile" "$address")
 		cache[$module,$address]=$code
 	fi
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 11/11] mm/mlock.c: change count_mm_mlocked_page_nr return type

[Sasha Levin]

From: swkhack <swkhack@gmail.com>

[ Upstream commit 0874bb49bb21bf24deda853e8bf61b8325e24bcb ]

On a 64-bit machine the value of "vma->vm_end - vma->vm_start" may be
negative when using 32 bit ints and the "count >> PAGE_SHIFT"'s result
will be wrong.  So change the local variable and return value to
unsigned long to fix the problem.

Link: http://lkml.kernel.org/r/20190513023701.83056-1-swkhack@gmail.com
Fixes: 0cf2f6f6dc60 ("mm: mlock: check against vma for actual mlock() size")
Signed-off-by: swkhack <swkhack@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/mlock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/mm/mlock.c b/mm/mlock.c
index f0505692a5f4..3e7fe404bfb8 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -630,11 +630,11 @@ static int apply_vma_lock_flags(unsigned long start, size_t len,
  * is also counted.
  * Return value: previously mlocked page counts
  */
-static int count_mm_mlocked_page_nr(struct mm_struct *mm,
+static unsigned long count_mm_mlocked_page_nr(struct mm_struct *mm,
 		unsigned long start, size_t len)
 {
 	struct vm_area_struct *vma;
-	int count = 0;
+	unsigned long count = 0;
 
 	if (mm == NULL)
 		mm = current->mm;
-- 
2.20.1