All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Nicolas Boichat <drinkcat@chromium.org>,
	Sean Wang <sean.wang@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-gpio@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 25/26] pinctrl: mediatek: Update cur_mask in mask/mask ops
Date: Tue,  2 Jul 2019 22:16:24 -0400	[thread overview]
Message-ID: <20190703021625.18116-25-sashal@kernel.org> (raw)
In-Reply-To: <20190703021625.18116-1-sashal@kernel.org>

From: Nicolas Boichat <drinkcat@chromium.org>

[ Upstream commit 9d957a959bc8c3dfe37572ac8e99affb5a885965 ]

During suspend/resume, mtk_eint_mask may be called while
wake_mask is active. For example, this happens if a wake-source
with an active interrupt handler wakes the system:
irq/pm.c:irq_pm_check_wakeup would disable the interrupt, so
that it can be handled later on in the resume flow.

However, this may happen before mtk_eint_do_resume is called:
in this case, wake_mask is loaded, and cur_mask is restored
from an older copy, re-enabling the interrupt, and causing
an interrupt storm (especially for level interrupts).

Step by step, for a line that has both wake and interrupt enabled:
 1. cur_mask[irq] = 1; wake_mask[irq] = 1; EINT_EN[irq] = 1 (interrupt
    enabled at hardware level)
 2. System suspends, resumes due to that line (at this stage EINT_EN
    == wake_mask)
 3. irq_pm_check_wakeup is called, and disables the interrupt =>
    EINT_EN[irq] = 0, but we still have cur_mask[irq] = 1
 4. mtk_eint_do_resume is called, and restores EINT_EN = cur_mask, so
    it reenables EINT_EN[irq] = 1 => interrupt storm as the driver
    is not yet ready to handle the interrupt.

This patch fixes the issue in step 3, by recording all mask/unmask
changes in cur_mask. This also avoids the need to read the current
mask in eint_do_suspend, and we can remove mtk_eint_chip_read_mask
function.

The interrupt will be re-enabled properly later on, sometimes after
mtk_eint_do_resume, when the driver is ready to handle it.

Fixes: 58a5e1b64bb0 ("pinctrl: mediatek: Implement wake handler and suspend resume")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/mediatek/mtk-eint.c | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

diff --git a/drivers/pinctrl/mediatek/mtk-eint.c b/drivers/pinctrl/mediatek/mtk-eint.c
index b9f3c02ba59d..564cfaee129d 100644
--- a/drivers/pinctrl/mediatek/mtk-eint.c
+++ b/drivers/pinctrl/mediatek/mtk-eint.c
@@ -113,6 +113,8 @@ static void mtk_eint_mask(struct irq_data *d)
 	void __iomem *reg = mtk_eint_get_offset(eint, d->hwirq,
 						eint->regs->mask_set);
 
+	eint->cur_mask[d->hwirq >> 5] &= ~mask;
+
 	writel(mask, reg);
 }
 
@@ -123,6 +125,8 @@ static void mtk_eint_unmask(struct irq_data *d)
 	void __iomem *reg = mtk_eint_get_offset(eint, d->hwirq,
 						eint->regs->mask_clr);
 
+	eint->cur_mask[d->hwirq >> 5] |= mask;
+
 	writel(mask, reg);
 
 	if (eint->dual_edge[d->hwirq])
@@ -217,19 +221,6 @@ static void mtk_eint_chip_write_mask(const struct mtk_eint *eint,
 	}
 }
 
-static void mtk_eint_chip_read_mask(const struct mtk_eint *eint,
-				    void __iomem *base, u32 *buf)
-{
-	int port;
-	void __iomem *reg;
-
-	for (port = 0; port < eint->hw->ports; port++) {
-		reg = base + eint->regs->mask + (port << 2);
-		buf[port] = ~readl_relaxed(reg);
-		/* Mask is 0 when irq is enabled, and 1 when disabled. */
-	}
-}
-
 static int mtk_eint_irq_request_resources(struct irq_data *d)
 {
 	struct mtk_eint *eint = irq_data_get_irq_chip_data(d);
@@ -384,7 +375,6 @@ static void mtk_eint_irq_handler(struct irq_desc *desc)
 
 int mtk_eint_do_suspend(struct mtk_eint *eint)
 {
-	mtk_eint_chip_read_mask(eint, eint->base, eint->cur_mask);
 	mtk_eint_chip_write_mask(eint, eint->base, eint->wake_mask);
 
 	return 0;
-- 
2.20.1


  parent reply	other threads:[~2019-07-03  2:17 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-03  2:16 [PATCH AUTOSEL 4.19 01/26] irqchip/gic-v3-its: Fix command queue pointer comparison bug Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 02/26] clk: ti: clkctrl: Fix returning uninitialized data Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 03/26] efi/bgrt: Drop BGRT status field reserved bits check Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 04/26] perf/core: Fix perf_sample_regs_user() mm check Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 05/26] ARM: dts: gemini Fix up DNS-313 compatible string Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 06/26] ARM: omap2: remove incorrect __init annotation Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 07/26] afs: Fix uninitialised spinlock afs_volume::cb_break_lock Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 08/26] x86/apic: Fix integer overflow on 10 bit left shift of cpu_khz Sasha Levin
2019-07-03  2:16   ` Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 09/26] be2net: fix link failure after ethtool offline test Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 10/26] ppp: mppe: Add softdep to arc4 Sasha Levin
2019-07-03  2:16   ` Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 11/26] net: stmmac: fixed new system time seconds value calculation Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 12/26] net: stmmac: set IC bit when transmitting frames with HW timestamp Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 13/26] sis900: fix TX completion Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 14/26] ARM: dts: imx6ul: fix PWM[1-4] interrupts Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 15/26] qmi_wwan: Fix out-of-bounds read Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 16/26] pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call order Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 17/26] dm table: don't copy from a NULL pointer in realloc_argv() Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 18/26] dm verity: use message limit for data block corruption message Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 19/26] x86/boot/64: Fix crash if kernel image crosses page table boundary Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 20/26] x86/boot/64: Add missing fixup_pointer() for next_early_pgt access Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 21/26] HID: chicony: add another quirk for PixArt mouse Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 22/26] HID: multitouch: Add pointstick support for ALPS Touchpad Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 23/26] pinctrl: mediatek: Ignore interrupts that are wake only during resume Sasha Levin
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 24/26] cpu/hotplug: Fix out-of-bounds read when setting fail state Sasha Levin
2019-07-03  2:16 ` Sasha Levin [this message]
2019-07-03  2:16 ` [PATCH AUTOSEL 4.19 26/26] linux/kernel.h: fix overflow for DIV_ROUND_UP_ULL Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190703021625.18116-25-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=drinkcat@chromium.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sean.wang@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.