All of lore.kernel.org
 help / color / mirror / Atom feed
From: Petr Vorel <petr.vorel@gmail.com>
To: ltp@lists.linux.it
Subject: [LTP] [PATCH 4/5] setdomainname02: Convert to new API
Date: Sun,  7 Jul 2019 21:00:15 +0200	[thread overview]
Message-ID: <20190707190016.27296-5-petr.vorel@gmail.com> (raw)
In-Reply-To: <20190707190016.27296-1-petr.vorel@gmail.com>

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
---
 .../syscalls/setdomainname/setdomainname02.c  | 197 ++++--------------
 1 file changed, 35 insertions(+), 162 deletions(-)

diff --git a/testcases/kernel/syscalls/setdomainname/setdomainname02.c b/testcases/kernel/syscalls/setdomainname/setdomainname02.c
index 6af09ca40..875ed0c44 100644
--- a/testcases/kernel/syscalls/setdomainname/setdomainname02.c
+++ b/testcases/kernel/syscalls/setdomainname/setdomainname02.c
@@ -1,181 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) Wipro Technologies Ltd, 2002.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program;  if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- *
+ * Copyright (c) Wipro Technologies Ltd, 2002. All Rights Reserved.
+ * Copyright (c) 2019 Petr Vorel <petr.vorel@gmail.com>
+ * Author: Saji Kumar.V.R <saji.kumar@wipro.com>
  */
- /*******************************************************************
- *
- *    TEST IDENTIFIER   : setdomainname02
- *
- *    EXECUTED BY       : root / superuser
- *
- *    TEST TITLE        : test for checking error conditions for setdomainame(2)
- *
- *    TEST CASE TOTAL   : 3
- *
- *    AUTHOR            : Saji Kumar.V.R <saji.kumar@wipro.com>
- *
- *    SIGNALS
- *      Uses SIGUSR1 to pause before test if option set.
- *      (See the parse_opts(3) man page).
- *
- * DESCRIPTION
- * 	Verify that,
- *   1) setdomainname(2) returns -1 and sets errno to EINVAL if the parameter,
- *	len is less than zero
- *   2) setdomainname(2) returns -1 and sets errno to EINVAL if value of
- *	len is greater than the maximum allowed value
- *   3) setdomainname(2) returns -1 and sets errno to EFAULT for a bad address
- *	for name
- *
- * ALGORITHM
- * Setup:
- *   Setup signal handling.
- *   Pause for SIGUSR1 if option specified.
- *   Save current domainname
- *
- *  Test:
- *   Loop if the proper options are given.
- *   Execute system call
- *   Check return code, if (system call failed (return=-1)) &
- *			   (errno set == expected errno)
- *              Issue sys call fails with expected return value and errno.
- *   Otherwise,
- *      Issue sys call returns unexpected value.
- *
- *  Cleanup:
- *        Restore old domain name.
- *        Print errno log and/or timing stats if options given
- *  Side Effects :
- *	 setdomainname() is resetting value to NULL, if an invalid address
- *	 is given for name. So, to overcome this problem, domainname is
- *	 resetting to original value as part of cleanup() routine.
- *
- * USAGE:  <for command-line>
- *  setdomainname02  [-c n] [-e] [-i n] [-I x] [-P x] [-t] [-h] [-f] [-p]
- *		where,  -c n : Run n copies concurrently.
- *			-e   : Turn on errno logging.
- *			-h   : Show help screen
- *			-f   : Turn off functional testing
- *			-i n : Execute test n times.
- *			-I x : Execute test for x seconds.
- *			-p   : Pause for SIGUSR1 before starting
- *			-P x : Pause for x seconds between iterations.
- *			-t   : Turn on syscall timing.
- *
- *********************************************************************/
 
-#include "test.h"
+#include "setdomainname.h"
 
-#include <errno.h>
-#include <sys/utsname.h>
+#define ERRNO_DESC(x) .exp_errno = x, .errno_desc = #x
 
-#define MAX_NAME_LEN _UTSNAME_DOMAIN_LENGTH - 1
+#define MAX_NAME_LENGTH _UTSNAME_DOMAIN_LENGTH - 1
 
-static void cleanup(void);
-static void setup(void);
-
-char *TCID = "setdomainname02";
-int TST_TOTAL = 3;
-
-static char old_domain_name[MAX_NAME_LEN];
-static struct test_case_t {
+struct test_case {
 	char *desc;
 	char *name;
 	int len;
 	int exp_errno;
-	char err_desc[10];
-} test_cases[] = {
-	{
-	"test with len = -1", "test_dom", -1, EINVAL, "EINVAL"}, {
-	"test with len > allowed maximum", "test_dom", MAX_NAME_LEN + 1,
-		    EINVAL, "EINVAL"}, {
-"test with name = NULL", NULL, MAX_NAME_LEN, EFAULT, "EFAULT"},};
-
-int main(int ac, char **av)
+	char *errno_desc;
+} tcases[] = {
+	{ "len == -1", TST_VALID_DOMAIN_NAME, -1, ERRNO_DESC(EINVAL) },
+	{ "len > allowed maximum", TST_VALID_DOMAIN_NAME, MAX_NAME_LENGTH + 1, ERRNO_DESC(EINVAL) },
+	{ "name == NULL", NULL, MAX_NAME_LENGTH, ERRNO_DESC(EFAULT) }
+};
+
+void verify_setdomainname(unsigned int nr)
 {
-	int lc, ind;
-
-	tst_parse_opts(ac, av, NULL, NULL);
-
-	setup();		/* global setup */
-
-	/* The following loop checks looping state if -i option given */
-
-	for (lc = 0; TEST_LOOPING(lc); lc++) {
-		/* reset tst_count in case we are looping */
-		tst_count = 0;
+	struct test_case *tcase = &tcases[nr];
 
-		for (ind = 0; ind < TST_TOTAL; ind++) {
+	TEST(do_setdomainname(tcase->name, (size_t) tcase->len));
 
-			/*
-			 * call the system call with the TEST() macro
-			 */
-			TEST(setdomainname(test_cases[ind].name,
-					   (size_t) test_cases[ind].len));
-
-			if ((TEST_RETURN == -1) &&
-			    (TEST_ERRNO == test_cases[ind].exp_errno)) {
-				tst_resm(TPASS, "expected failure; Got %s",
-					 test_cases[ind].err_desc);
-			} else {
-				tst_resm(TFAIL, "Call failed to produce "
-					 "expected error;  Expected errno: %d "
-					 "Got : %d, %s",
-					 test_cases[ind].exp_errno,
-					 TEST_ERRNO, strerror(TEST_ERRNO));
-			}
-		}
+	tst_res(TINFO, "testing %s", tcase->desc);
+	if (TST_RET != -1) {
+		tst_res(TFAIL, "unexpected exit code: %ld", TST_RET);
+		return;
 	}
 
-	cleanup();
-
-	tst_exit();
-
-}
-
-/*
- * setup() - performs all the ONE TIME setup for this test.
- */
-void setup(void)
-{
-	tst_require_root();
-
-	tst_sig(NOFORK, DEF_HANDLER, cleanup);
-
-	/* Save current domainname */
-	if ((getdomainname(old_domain_name, MAX_NAME_LEN)) < 0) {
-		tst_brkm(TBROK, NULL, "getdomainname() failed while"
-			 " getting current domain name");
+	if (TST_ERR != tcase->exp_errno) {
+		tst_res(TFAIL | TTERRNO, "unexpected errno: %d, expected: %d",
+			TST_ERR, tcase->exp_errno);
+		return;
 	}
 
-	TEST_PAUSE;
-
+	tst_res(TPASS | TTERRNO, "expected failure");
 }
 
-/*
- * cleanup() - performs all the ONE TIME cleanup for this test at completion
- * 	       or premature exit.
- */
-void cleanup(void)
-{
-
-	/* Restore domain name */
-	if ((setdomainname(old_domain_name, sizeof(old_domain_name)))
-	    < 0) {
-		tst_resm(TWARN, "setdomainname() failed while restoring"
-			 " domainname to \"%s\"", old_domain_name);
-	}
-
-}
+static struct tst_test test = {
+	.tcnt = ARRAY_SIZE(tcases),
+	.needs_root = 1,
+	.setup = setup,
+	.cleanup = cleanup,
+	.test = verify_setdomainname,
+	.test_variants = TEST_VARIANTS,
+};
-- 
2.20.1


  parent reply	other threads:[~2019-07-07 19:00 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-07 19:00 [LTP] [PATCH 0/5] setdomainname() converted to new API Petr Vorel
2019-07-07 19:00 ` [LTP] [PATCH 1/5] lib: include <errno.h> in tst_test.h Petr Vorel
2019-07-09 10:55   ` Cyril Hrubis
2019-07-09 20:51     ` Petr Vorel
2019-07-07 19:00 ` [LTP] [PATCH 2/5] lapi: Add utsname.h Petr Vorel
2019-07-17 16:50   ` Petr Vorel
2019-07-07 19:00 ` [LTP] [PATCH 3/5] setdomainname01: Convert to new API Petr Vorel
2019-07-07 19:00 ` Petr Vorel [this message]
2019-07-07 19:00 ` [LTP] [PATCH 5/5] setdomainname03: " Petr Vorel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190707190016.27296-5-petr.vorel@gmail.com \
    --to=petr.vorel@gmail.com \
    --cc=ltp@lists.linux.it \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.