From: Peng Fan <peng.fan@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 00/51] Support i.MX8MM/N
Date: Mon, 8 Jul 2019 01:38:36 +0000 [thread overview]
Message-ID: <20190708015333.20411-1-peng.fan@nxp.com> (raw)
This patchset is to support i.MX8MM/8MN with some update
in ddr settings and ddr driver update.
V2:
Fix build break, add Cc for some patches, and drop CCF select in i.MX8MM
Fix script to remove srctree in tools/imx8m_image.sh
Fix License
Rebased
V1:
The initial patchset to support i.MX8MM is
https://patchwork.ozlabs.org/cover/1093140/
But in this patchset I dropped CCF, and use original CLK uclass
Bai Ping (1):
imx8mq: Update the ddrc QoS setting for B1 chip
Jacky Bai (2):
driver: ddr: Refine the ddr init driver on imx8m
ddr: imx8m: Fix the ddr init hang on imx8mq
Peng Fan (46):
linux: compat: guard PAGE_SIZE
dm: clk: ignore default settings when node not valid
pinctrl: imx: use devfdt_get_addr_size_index
i2c: mxc: add CONFIG_CLK support
tools: imx8m_image: align spl bin image size
ddr: imx8m: fix ddr firmware location when enable SPL OF
tools: imx8mimage: fix HDMI/FIT parsing
imx8m: add image cfg for i.MX8MM lpddr4
imx: add IMX8MQ kconfig entry
imx: add IMX8MM kconfig entry
imx: imx8mm: add clock bindings header
imx: add i.MX8MM cpu type
imx: spl: add spl_board_boot_device for i.MX8MM
imx8m: update imx-regs for i.MX8MM
imx: add get_cpu_rev support for i.MX8MM
imx8m: rename clock to clock_imx8mq
imx8m: restructure clock.h
imx8m: add clk support for i.MX8MM
imx8m: soc: probe clk before relocation
imx8m: add pin header for i.MX8MM
imx: add i.MX8MM PE property
imx8m: Fix MMU table issue for OPTEE memory
imx8m: set BYPASS ID SWAP to avoid AXI bus errors
imx8m: soc: enable SCTR clock before timer init
serial: Kconfig: make MXC_UART usable for MX7 and IMX8M
clk: imx: add Kconfig entry for i.MX8MM
clk: imx: add i.MX8MM clk driver
imx: add i.MX8MM EVK board support
imx: add i.MX8MN kconfig entry
imx8mn: support get_cpu_rev
imx8m: add clk support for i.MX8MN
imx8mn: set BYPASS ID SWAP to avoid AXI bus errors
imx: add i.MX8MN PE property
imx8mn: add pin header
imx: spl: use spl_board_boot_device for i.MX8MN
spl: pass args to board_return_to_bootrom
imx: add rom api support
imx: cpu: restrict get_boot_device
imx8mn: add get_boot_device
tools: imx8mimage: add ROM VERSION
pinctrl: imx8m: support i.MX8MN
tools: imx8m_image: support ddr4 firmware
clk: imx: add i.MX8MN clk support
imx8m: add i.MX8MN ddr4 image cfg file
imx: add dtsi for i.MX8MN
imx: add i.MX8MN DDR4 board support
Ye Li (2):
imx8m: Configure trustzone region 0 for non-secure access
ddr: imx8m: Fix ddr4 driver build issue
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/imx8mm-evk-u-boot.dtsi | 92 +
arch/arm/dts/imx8mm-evk.dts | 235 +++
arch/arm/dts/imx8mm-pinfunc.h | 629 +++++++
arch/arm/dts/imx8mm.dtsi | 733 ++++++++
arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 92 +
arch/arm/dts/imx8mn-ddr4-evk.dts | 221 +++
arch/arm/dts/imx8mn-pinfunc.h | 646 +++++++
arch/arm/dts/imx8mn.dtsi | 712 +++++++
arch/arm/include/asm/arch-imx/cpu.h | 7 +
arch/arm/include/asm/arch-imx8m/clock.h | 494 +----
arch/arm/include/asm/arch-imx8m/clock_imx8mm.h | 465 +++++
arch/arm/include/asm/arch-imx8m/clock_imx8mq.h | 424 +++++
arch/arm/include/asm/arch-imx8m/imx-regs.h | 75 +-
arch/arm/include/asm/arch-imx8m/imx8mm_pins.h | 691 +++++++
arch/arm/include/asm/arch-imx8m/imx8mn_pins.h | 763 ++++++++
arch/arm/include/asm/mach-imx/iomux-v3.h | 4 +
arch/arm/include/asm/mach-imx/mxc_i2c.h | 6 +
arch/arm/include/asm/mach-imx/sys_proto.h | 42 +
arch/arm/mach-imx/Kconfig | 4 +
arch/arm/mach-imx/Makefile | 2 +
arch/arm/mach-imx/cpu.c | 16 +-
arch/arm/mach-imx/imx8m/Kconfig | 28 +-
arch/arm/mach-imx/imx8m/Makefile | 4 +-
arch/arm/mach-imx/imx8m/clock_imx8mm.c | 707 +++++++
.../arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} | 7 +-
arch/arm/mach-imx/imx8m/clock_slice.c | 815 ++++++++
arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg | 16 +
arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg | 17 +
arch/arm/mach-imx/imx8m/soc.c | 162 +-
arch/arm/mach-imx/imx_romapi.c | 292 +++
arch/arm/mach-imx/spl.c | 8 +
arch/arm/mach-rockchip/rk3288-board-tpl.c | 5 +-
arch/arm/mach-rockchip/rk3368-board-tpl.c | 5 +-
arch/arm/mach-rockchip/rk3399-board-spl.c | 5 +-
arch/arm/mach-rockchip/rk3399-board-tpl.c | 5 +-
board/freescale/imx8mm_evk/Kconfig | 12 +
board/freescale/imx8mm_evk/MAINTAINERS | 6 +
board/freescale/imx8mm_evk/Makefile | 12 +
board/freescale/imx8mm_evk/imx8mm_evk.c | 90 +
board/freescale/imx8mm_evk/lpddr4_timing.c | 1980 ++++++++++++++++++++
board/freescale/imx8mm_evk/spl.c | 216 +++
board/freescale/imx8mn_evk/Kconfig | 14 +
board/freescale/imx8mn_evk/MAINTAINERS | 6 +
board/freescale/imx8mn_evk/Makefile | 12 +
board/freescale/imx8mn_evk/ddr4_timing.c | 1213 ++++++++++++
board/freescale/imx8mn_evk/imx8mn_evk.c | 85 +
board/freescale/imx8mn_evk/spl.c | 90 +
board/freescale/imx8mq_evk/lpddr4_timing.c | 16 +-
common/spl/spl_bootrom.c | 7 +-
configs/imx8mm_evk_defconfig | 51 +
configs/imx8mn_ddr4_evk_defconfig | 53 +
drivers/clk/clk-uclass.c | 3 +
drivers/clk/imx/Kconfig | 14 +
drivers/clk/imx/Makefile | 1 +
drivers/clk/imx/clk-imx8mm.c | 121 ++
drivers/ddr/imx/imx8m/Kconfig | 6 +
drivers/ddr/imx/imx8m/Makefile | 4 +-
drivers/ddr/imx/imx8m/ddr4_init.c | 113 --
drivers/ddr/imx/imx8m/ddr_init.c | 168 ++
drivers/ddr/imx/imx8m/ddrphy_utils.c | 4 +
drivers/ddr/imx/imx8m/helper.c | 22 +-
drivers/ddr/imx/imx8m/lpddr4_init.c | 188 --
drivers/i2c/mxc_i2c.c | 17 +
drivers/pinctrl/nxp/pinctrl-imx.c | 4 +-
drivers/pinctrl/nxp/pinctrl-imx8m.c | 1 +
drivers/serial/Kconfig | 2 +-
include/configs/imx8mm_evk.h | 200 ++
include/configs/imx8mn_evk.h | 198 ++
include/dt-bindings/clock/imx8mm-clock.h | 244 +++
include/dt-bindings/clock/imx8mn-clock.h | 215 +++
include/imximage.h | 1 +
include/linux/compat.h | 2 +
include/spl.h | 3 +-
tools/imx8m_image.sh | 15 +-
tools/imx8mimage.c | 31 +-
76 files changed, 13065 insertions(+), 808 deletions(-)
create mode 100644 arch/arm/dts/imx8mm-evk-u-boot.dtsi
create mode 100644 arch/arm/dts/imx8mm-evk.dts
create mode 100644 arch/arm/dts/imx8mm-pinfunc.h
create mode 100644 arch/arm/dts/imx8mm.dtsi
create mode 100644 arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
create mode 100644 arch/arm/dts/imx8mn-ddr4-evk.dts
create mode 100644 arch/arm/dts/imx8mn-pinfunc.h
create mode 100644 arch/arm/dts/imx8mn.dtsi
create mode 100644 arch/arm/include/asm/arch-imx8m/clock_imx8mm.h
create mode 100644 arch/arm/include/asm/arch-imx8m/clock_imx8mq.h
create mode 100644 arch/arm/include/asm/arch-imx8m/imx8mm_pins.h
create mode 100644 arch/arm/include/asm/arch-imx8m/imx8mn_pins.h
create mode 100644 arch/arm/mach-imx/imx8m/clock_imx8mm.c
rename arch/arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} (99%)
create mode 100644 arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg
create mode 100644 arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg
create mode 100644 arch/arm/mach-imx/imx_romapi.c
create mode 100644 board/freescale/imx8mm_evk/Kconfig
create mode 100644 board/freescale/imx8mm_evk/MAINTAINERS
create mode 100644 board/freescale/imx8mm_evk/Makefile
create mode 100644 board/freescale/imx8mm_evk/imx8mm_evk.c
create mode 100644 board/freescale/imx8mm_evk/lpddr4_timing.c
create mode 100644 board/freescale/imx8mm_evk/spl.c
create mode 100644 board/freescale/imx8mn_evk/Kconfig
create mode 100644 board/freescale/imx8mn_evk/MAINTAINERS
create mode 100644 board/freescale/imx8mn_evk/Makefile
create mode 100644 board/freescale/imx8mn_evk/ddr4_timing.c
create mode 100644 board/freescale/imx8mn_evk/imx8mn_evk.c
create mode 100644 board/freescale/imx8mn_evk/spl.c
create mode 100644 configs/imx8mm_evk_defconfig
create mode 100644 configs/imx8mn_ddr4_evk_defconfig
create mode 100644 drivers/clk/imx/clk-imx8mm.c
delete mode 100644 drivers/ddr/imx/imx8m/ddr4_init.c
create mode 100644 drivers/ddr/imx/imx8m/ddr_init.c
delete mode 100644 drivers/ddr/imx/imx8m/lpddr4_init.c
create mode 100644 include/configs/imx8mm_evk.h
create mode 100644 include/configs/imx8mn_evk.h
create mode 100644 include/dt-bindings/clock/imx8mm-clock.h
create mode 100644 include/dt-bindings/clock/imx8mn-clock.h
--
2.16.4
next reply other threads:[~2019-07-08 1:38 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-08 1:38 Peng Fan [this message]
2019-07-08 1:38 ` [U-Boot] [PATCH V2 01/51] linux: compat: guard PAGE_SIZE Peng Fan
2019-07-08 1:38 ` [U-Boot] [PATCH V2 02/51] dm: clk: ignore default settings when node not valid Peng Fan
2019-07-08 1:38 ` [U-Boot] [PATCH V2 03/51] pinctrl: imx: use devfdt_get_addr_size_index Peng Fan
2019-07-08 1:38 ` [U-Boot] [PATCH V2 04/51] i2c: mxc: add CONFIG_CLK support Peng Fan
2019-07-10 8:03 ` Lukasz Majewski
2019-07-10 8:19 ` Peng Fan
2019-07-10 14:10 ` Schrempf Frieder
2019-07-11 6:43 ` Peng Fan
2019-07-08 1:38 ` [U-Boot] [PATCH V2 05/51] tools: imx8m_image: align spl bin image size Peng Fan
2019-07-08 1:38 ` [U-Boot] [PATCH V2 06/51] ddr: imx8m: fix ddr firmware location when enable SPL OF Peng Fan
2019-07-08 1:38 ` [U-Boot] [PATCH V2 07/51] tools: imx8mimage: fix HDMI/FIT parsing Peng Fan
2019-07-08 1:38 ` [U-Boot] [PATCH V2 08/51] imx8m: add image cfg for i.MX8MM lpddr4 Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 09/51] imx: add IMX8MQ kconfig entry Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 10/51] imx: add IMX8MM " Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 11/51] imx: imx8mm: add clock bindings header Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 12/51] imx: add i.MX8MM cpu type Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 13/51] imx: spl: add spl_board_boot_device for i.MX8MM Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 14/51] imx8m: update imx-regs " Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 15/51] imx: add get_cpu_rev support " Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 16/51] imx8m: rename clock to clock_imx8mq Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 17/51] imx8m: restructure clock.h Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 18/51] imx8m: add clk support for i.MX8MM Peng Fan
2019-07-08 9:07 ` Lukasz Majewski
2019-07-08 9:32 ` Peng Fan
2019-07-08 10:13 ` Lukasz Majewski
2019-07-10 0:49 ` Peng Fan
2019-07-10 7:22 ` Lukasz Majewski
2019-07-10 8:22 ` Peng Fan
2019-07-10 8:47 ` Lukasz Majewski
2019-07-08 1:39 ` [U-Boot] [PATCH V2 19/51] imx8m: soc: probe clk before relocation Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 20/51] imx8m: add pin header for i.MX8MM Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 21/51] imx: add i.MX8MM PE property Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 22/51] imx8m: Fix MMU table issue for OPTEE memory Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 23/51] imx8m: set BYPASS ID SWAP to avoid AXI bus errors Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 24/51] imx8m: Configure trustzone region 0 for non-secure access Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 25/51] imx8m: soc: enable SCTR clock before timer init Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 26/51] serial: Kconfig: make MXC_UART usable for MX7 and IMX8M Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 27/51] clk: imx: add Kconfig entry for i.MX8MM Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 28/51] clk: imx: add i.MX8MM clk driver Peng Fan
2019-07-10 14:22 ` Schrempf Frieder
2019-07-08 1:39 ` [U-Boot] [PATCH V2 29/51] imx: add i.MX8MM EVK board support Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 30/51] ddr: imx8m: Fix ddr4 driver build issue Peng Fan
2019-07-08 1:39 ` [U-Boot] [PATCH V2 31/51] imx8mq: Update the ddrc QoS setting for B1 chip Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 32/51] driver: ddr: Refine the ddr init driver on imx8m Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 33/51] ddr: imx8m: Fix the ddr init hang on imx8mq Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 34/51] imx: add i.MX8MN kconfig entry Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 35/51] imx8mn: support get_cpu_rev Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 36/51] imx8m: add clk support for i.MX8MN Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 37/51] imx8mn: set BYPASS ID SWAP to avoid AXI bus errors Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 38/51] imx: add i.MX8MN PE property Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 39/51] imx8mn: add pin header Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 40/51] imx: spl: use spl_board_boot_device for i.MX8MN Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 41/51] spl: pass args to board_return_to_bootrom Peng Fan
2019-07-10 6:23 ` Kever Yang
2019-07-10 8:09 ` Philipp Tomsich
2019-07-08 1:40 ` [U-Boot] [PATCH V2 42/51] imx: add rom api support Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 43/51] imx: cpu: restrict get_boot_device Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 44/51] imx8mn: add get_boot_device Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 45/51] tools: imx8mimage: add ROM VERSION Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 46/51] pinctrl: imx8m: support i.MX8MN Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 47/51] tools: imx8m_image: support ddr4 firmware Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 48/51] clk: imx: add i.MX8MN clk support Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 49/51] imx8m: add i.MX8MN ddr4 image cfg file Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 50/51] imx: add dtsi for i.MX8MN Peng Fan
2019-07-10 8:08 ` Lukasz Majewski
2019-07-10 8:09 ` Peng Fan
2019-07-10 8:44 ` Lukasz Majewski
2019-07-10 8:50 ` Peng Fan
2019-07-08 1:40 ` [U-Boot] [PATCH V2 51/51] imx: add i.MX8MN DDR4 board support Peng Fan
2019-07-10 8:34 ` Lukasz Majewski
2019-07-10 10:05 ` Peng Fan
2019-07-10 12:18 ` Lukasz Majewski
2019-07-08 8:47 ` [U-Boot] [PATCH V2 00/51] Support i.MX8MM/N Schrempf Frieder
2019-07-08 8:49 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190708015333.20411-1-peng.fan@nxp.com \
--to=peng.fan@nxp.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.