From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peng Fan Date: Mon, 8 Jul 2019 01:38:49 +0000 Subject: [U-Boot] [PATCH V2 04/51] i2c: mxc: add CONFIG_CLK support In-Reply-To: <20190708015333.20411-1-peng.fan@nxp.com> References: <20190708015333.20411-1-peng.fan@nxp.com> Message-ID: <20190708015333.20411-5-peng.fan@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de When CONFIG_CLK enabled, use CLK UCLASS for clk related settings. Signed-off-by: Peng Fan --- arch/arm/include/asm/mach-imx/mxc_i2c.h | 6 ++++++ drivers/i2c/mxc_i2c.c | 17 +++++++++++++++++ 2 files changed, 23 insertions(+) diff --git a/arch/arm/include/asm/mach-imx/mxc_i2c.h b/arch/arm/include/asm/mach-imx/mxc_i2c.h index 8e1ea9af19..81fd981444 100644 --- a/arch/arm/include/asm/mach-imx/mxc_i2c.h +++ b/arch/arm/include/asm/mach-imx/mxc_i2c.h @@ -6,6 +6,9 @@ #define __ASM_ARCH_MXC_MXC_I2C_H__ #include #include +#if CONFIG_IS_ENABLED(CLK) +#include +#endif struct i2c_pin_ctrl { iomux_v3_cfg_t i2c_mode; @@ -47,6 +50,9 @@ struct mxc_i2c_bus { ulong driver_data; int speed; struct i2c_pads_info *pads_info; +#if CONFIG_IS_ENABLED(CLK) + struct clk per_clk; +#endif #ifndef CONFIG_DM_I2C int (*idle_bus_fn)(void *p); void *idle_bus_data; diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index 23119cce65..2e157bca58 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -890,9 +890,22 @@ static int mxc_i2c_probe(struct udevice *bus) i2c_bus->bus = bus; /* Enable clk */ +#if CONFIG_IS_ENABLED(CLK) + ret = clk_get_by_index(bus, 0, &i2c_bus->per_clk); + if (ret) { + printf("Failed to get i2c clk\n"); + return ret; + } + ret = clk_enable(&i2c_bus->per_clk); + if (ret) { + printf("Failed to enable i2c clk\n"); + return ret; + } +#else ret = enable_i2c_clk(1, bus->seq); if (ret < 0) return ret; +#endif /* * See Documentation/devicetree/bindings/i2c/i2c-imx.txt @@ -919,7 +932,11 @@ static int mxc_i2c_probe(struct udevice *bus) ret = i2c_idle_bus(i2c_bus); if (ret < 0) { /* Disable clk */ +#if CONFIG_IS_ENABLED(CLK) + clk_disable(&i2c_bus->per_clk); +#else enable_i2c_clk(0, bus->seq); +#endif return ret; } -- 2.16.4