All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v6 0/4] Panel rotation patches
@ 2019-07-09 22:58 ` Derek Basehore
  0 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Maarten Lankhorst, Maxime Ripard, Sean Paul, David Airlie,
	Daniel Vetter, Thierry Reding, Sam Ravnborg, Jani Nikula,
	Joonas Lahtinen, Rodrigo Vivi, CK Hu, Philipp Zabel,
	Matthias Brugger, dri-devel, intel-gfx, linux-arm-kernel,
	linux-mediatek, Derek Basehore

This adds the plumbing for reading panel rotation from the devicetree
and sets up adding a panel property for the panel orientation on
Mediatek SoCs when a rotation is present.

v6 changes:
-added enum declaration to drm_panel.h header

v5 changes:
-rebased

v4 changes:
-fixed some changes made to the i915 driver
-clarified comments on of orientation helper

v3 changes:
-changed from attach/detach callbacks to directly setting fixed panel
 values in drm_panel_attach
-removed update to Documentation
-added separate function for quirked panel orientation property init

v2 changes:
fixed build errors in i915

Derek Basehore (4):
  drm/panel: Add helper for reading DT rotation
  drm/panel: set display info in panel attach
  drm/connector: Split out orientation quirk detection
  drm/mtk: add panel orientation property

 drivers/gpu/drm/drm_connector.c    | 45 ++++++++++++++-----
 drivers/gpu/drm/drm_panel.c        | 70 ++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_dp.c    |  4 +-
 drivers/gpu/drm/i915/vlv_dsi.c     |  5 +--
 drivers/gpu/drm/mediatek/mtk_dsi.c |  8 ++++
 include/drm/drm_connector.h        |  2 +
 include/drm/drm_panel.h            | 21 +++++++++
 7 files changed, 138 insertions(+), 17 deletions(-)

-- 
2.22.0.410.gd8fdbe21b5-goog


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v6 0/4] Panel rotation patches
@ 2019-07-09 22:58 ` Derek Basehore
  0 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Derek Basehore, Philipp Zabel, Maxime Ripard, Sam Ravnborg,
	intel-gfx, Joonas Lahtinen, Maarten Lankhorst, Jani Nikula,
	David Airlie, Thierry Reding, Matthias Brugger, dri-devel,
	Daniel Vetter, Rodrigo Vivi, CK Hu, linux-mediatek, Sean Paul,
	linux-arm-kernel

This adds the plumbing for reading panel rotation from the devicetree
and sets up adding a panel property for the panel orientation on
Mediatek SoCs when a rotation is present.

v6 changes:
-added enum declaration to drm_panel.h header

v5 changes:
-rebased

v4 changes:
-fixed some changes made to the i915 driver
-clarified comments on of orientation helper

v3 changes:
-changed from attach/detach callbacks to directly setting fixed panel
 values in drm_panel_attach
-removed update to Documentation
-added separate function for quirked panel orientation property init

v2 changes:
fixed build errors in i915

Derek Basehore (4):
  drm/panel: Add helper for reading DT rotation
  drm/panel: set display info in panel attach
  drm/connector: Split out orientation quirk detection
  drm/mtk: add panel orientation property

 drivers/gpu/drm/drm_connector.c    | 45 ++++++++++++++-----
 drivers/gpu/drm/drm_panel.c        | 70 ++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_dp.c    |  4 +-
 drivers/gpu/drm/i915/vlv_dsi.c     |  5 +--
 drivers/gpu/drm/mediatek/mtk_dsi.c |  8 ++++
 include/drm/drm_connector.h        |  2 +
 include/drm/drm_panel.h            | 21 +++++++++
 7 files changed, 138 insertions(+), 17 deletions(-)

-- 
2.22.0.410.gd8fdbe21b5-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v6 1/4] drm/panel: Add helper for reading DT rotation
  2019-07-09 22:58 ` Derek Basehore
  (?)
@ 2019-07-09 22:58   ` Derek Basehore
  -1 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Maarten Lankhorst, Maxime Ripard, Sean Paul, David Airlie,
	Daniel Vetter, Thierry Reding, Sam Ravnborg, Jani Nikula,
	Joonas Lahtinen, Rodrigo Vivi, CK Hu, Philipp Zabel,
	Matthias Brugger, dri-devel, intel-gfx, linux-arm-kernel,
	linux-mediatek, Derek Basehore

This adds a helper function for reading the rotation (panel
orientation) from the device tree.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
 drivers/gpu/drm/drm_panel.c | 43 +++++++++++++++++++++++++++++++++++++
 include/drm/drm_panel.h     |  9 ++++++++
 2 files changed, 52 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index dbd5b873e8f2..169bab54d52d 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -172,6 +172,49 @@ struct drm_panel *of_drm_find_panel(const struct device_node *np)
 	return ERR_PTR(-EPROBE_DEFER);
 }
 EXPORT_SYMBOL(of_drm_find_panel);
+
+/**
+ * of_drm_get_panel_orientation - look up the orientation of the panel through
+ * the "rotation" binding from a device tree node
+ * @np: device tree node of the panel
+ * @orientation: orientation enum to be filled in
+ *
+ * Looks up the rotation of a panel in the device tree. The orientation of the
+ * panel is expressed as a property name "rotation" in the device tree. The
+ * rotation in the device tree is counter clockwise.
+ *
+ * Return: 0 when a valid rotation value (0, 90, 180, or 270) is read or the
+ * rotation property doesn't exist. -EERROR otherwise.
+ */
+int of_drm_get_panel_orientation(const struct device_node *np,
+				 enum drm_panel_orientation *orientation)
+{
+	int rotation, ret;
+
+	ret = of_property_read_u32(np, "rotation", &rotation);
+	if (ret == -EINVAL) {
+		/* Don't return an error if there's no rotation property. */
+		*orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+		return 0;
+	}
+
+	if (ret < 0)
+		return ret;
+
+	if (rotation == 0)
+		*orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
+	else if (rotation == 90)
+		*orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
+	else if (rotation == 180)
+		*orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
+	else if (rotation == 270)
+		*orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL(of_drm_get_panel_orientation);
 #endif
 
 MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index 8c738c0e6e9f..a18c59f136ab 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -33,6 +33,8 @@ struct drm_device;
 struct drm_panel;
 struct display_timing;
 
+enum drm_panel_orientation;
+
 /**
  * struct drm_panel_funcs - perform operations on a given panel
  * @disable: disable panel (turn off back light, etc.)
@@ -197,11 +199,18 @@ int drm_panel_detach(struct drm_panel *panel);
 
 #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL)
 struct drm_panel *of_drm_find_panel(const struct device_node *np);
+int of_drm_get_panel_orientation(const struct device_node *np,
+				 enum drm_panel_orientation *orientation);
 #else
 static inline struct drm_panel *of_drm_find_panel(const struct device_node *np)
 {
 	return ERR_PTR(-ENODEV);
 }
+int of_drm_get_panel_orientation(const struct device_node *np,
+				 enum drm_panel_orientation *orientation)
+{
+	return -ENODEV;
+}
 #endif
 
 #endif
-- 
2.22.0.410.gd8fdbe21b5-goog


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v6 1/4] drm/panel: Add helper for reading DT rotation
@ 2019-07-09 22:58   ` Derek Basehore
  0 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Derek Basehore, Philipp Zabel, Maxime Ripard, Sam Ravnborg,
	intel-gfx, David Airlie, Matthias Brugger, dri-devel, CK Hu,
	linux-mediatek, linux-arm-kernel

This adds a helper function for reading the rotation (panel
orientation) from the device tree.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
 drivers/gpu/drm/drm_panel.c | 43 +++++++++++++++++++++++++++++++++++++
 include/drm/drm_panel.h     |  9 ++++++++
 2 files changed, 52 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index dbd5b873e8f2..169bab54d52d 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -172,6 +172,49 @@ struct drm_panel *of_drm_find_panel(const struct device_node *np)
 	return ERR_PTR(-EPROBE_DEFER);
 }
 EXPORT_SYMBOL(of_drm_find_panel);
+
+/**
+ * of_drm_get_panel_orientation - look up the orientation of the panel through
+ * the "rotation" binding from a device tree node
+ * @np: device tree node of the panel
+ * @orientation: orientation enum to be filled in
+ *
+ * Looks up the rotation of a panel in the device tree. The orientation of the
+ * panel is expressed as a property name "rotation" in the device tree. The
+ * rotation in the device tree is counter clockwise.
+ *
+ * Return: 0 when a valid rotation value (0, 90, 180, or 270) is read or the
+ * rotation property doesn't exist. -EERROR otherwise.
+ */
+int of_drm_get_panel_orientation(const struct device_node *np,
+				 enum drm_panel_orientation *orientation)
+{
+	int rotation, ret;
+
+	ret = of_property_read_u32(np, "rotation", &rotation);
+	if (ret == -EINVAL) {
+		/* Don't return an error if there's no rotation property. */
+		*orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+		return 0;
+	}
+
+	if (ret < 0)
+		return ret;
+
+	if (rotation == 0)
+		*orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
+	else if (rotation == 90)
+		*orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
+	else if (rotation == 180)
+		*orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
+	else if (rotation == 270)
+		*orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL(of_drm_get_panel_orientation);
 #endif
 
 MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index 8c738c0e6e9f..a18c59f136ab 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -33,6 +33,8 @@ struct drm_device;
 struct drm_panel;
 struct display_timing;
 
+enum drm_panel_orientation;
+
 /**
  * struct drm_panel_funcs - perform operations on a given panel
  * @disable: disable panel (turn off back light, etc.)
@@ -197,11 +199,18 @@ int drm_panel_detach(struct drm_panel *panel);
 
 #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL)
 struct drm_panel *of_drm_find_panel(const struct device_node *np);
+int of_drm_get_panel_orientation(const struct device_node *np,
+				 enum drm_panel_orientation *orientation);
 #else
 static inline struct drm_panel *of_drm_find_panel(const struct device_node *np)
 {
 	return ERR_PTR(-ENODEV);
 }
+int of_drm_get_panel_orientation(const struct device_node *np,
+				 enum drm_panel_orientation *orientation)
+{
+	return -ENODEV;
+}
 #endif
 
 #endif
-- 
2.22.0.410.gd8fdbe21b5-goog

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v6 1/4] drm/panel: Add helper for reading DT rotation
@ 2019-07-09 22:58   ` Derek Basehore
  0 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Derek Basehore, Philipp Zabel, Maxime Ripard, Sam Ravnborg,
	intel-gfx, Joonas Lahtinen, Maarten Lankhorst, Jani Nikula,
	David Airlie, Thierry Reding, Matthias Brugger, dri-devel,
	Daniel Vetter, Rodrigo Vivi, CK Hu, linux-mediatek, Sean Paul,
	linux-arm-kernel

This adds a helper function for reading the rotation (panel
orientation) from the device tree.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
 drivers/gpu/drm/drm_panel.c | 43 +++++++++++++++++++++++++++++++++++++
 include/drm/drm_panel.h     |  9 ++++++++
 2 files changed, 52 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index dbd5b873e8f2..169bab54d52d 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -172,6 +172,49 @@ struct drm_panel *of_drm_find_panel(const struct device_node *np)
 	return ERR_PTR(-EPROBE_DEFER);
 }
 EXPORT_SYMBOL(of_drm_find_panel);
+
+/**
+ * of_drm_get_panel_orientation - look up the orientation of the panel through
+ * the "rotation" binding from a device tree node
+ * @np: device tree node of the panel
+ * @orientation: orientation enum to be filled in
+ *
+ * Looks up the rotation of a panel in the device tree. The orientation of the
+ * panel is expressed as a property name "rotation" in the device tree. The
+ * rotation in the device tree is counter clockwise.
+ *
+ * Return: 0 when a valid rotation value (0, 90, 180, or 270) is read or the
+ * rotation property doesn't exist. -EERROR otherwise.
+ */
+int of_drm_get_panel_orientation(const struct device_node *np,
+				 enum drm_panel_orientation *orientation)
+{
+	int rotation, ret;
+
+	ret = of_property_read_u32(np, "rotation", &rotation);
+	if (ret == -EINVAL) {
+		/* Don't return an error if there's no rotation property. */
+		*orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+		return 0;
+	}
+
+	if (ret < 0)
+		return ret;
+
+	if (rotation == 0)
+		*orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
+	else if (rotation == 90)
+		*orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
+	else if (rotation == 180)
+		*orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
+	else if (rotation == 270)
+		*orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL(of_drm_get_panel_orientation);
 #endif
 
 MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index 8c738c0e6e9f..a18c59f136ab 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -33,6 +33,8 @@ struct drm_device;
 struct drm_panel;
 struct display_timing;
 
+enum drm_panel_orientation;
+
 /**
  * struct drm_panel_funcs - perform operations on a given panel
  * @disable: disable panel (turn off back light, etc.)
@@ -197,11 +199,18 @@ int drm_panel_detach(struct drm_panel *panel);
 
 #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL)
 struct drm_panel *of_drm_find_panel(const struct device_node *np);
+int of_drm_get_panel_orientation(const struct device_node *np,
+				 enum drm_panel_orientation *orientation);
 #else
 static inline struct drm_panel *of_drm_find_panel(const struct device_node *np)
 {
 	return ERR_PTR(-ENODEV);
 }
+int of_drm_get_panel_orientation(const struct device_node *np,
+				 enum drm_panel_orientation *orientation)
+{
+	return -ENODEV;
+}
 #endif
 
 #endif
-- 
2.22.0.410.gd8fdbe21b5-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v6 2/4] drm/panel: set display info in panel attach
  2019-07-09 22:58 ` Derek Basehore
  (?)
@ 2019-07-09 22:58   ` Derek Basehore
  -1 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Maarten Lankhorst, Maxime Ripard, Sean Paul, David Airlie,
	Daniel Vetter, Thierry Reding, Sam Ravnborg, Jani Nikula,
	Joonas Lahtinen, Rodrigo Vivi, CK Hu, Philipp Zabel,
	Matthias Brugger, dri-devel, intel-gfx, linux-arm-kernel,
	linux-mediatek, Derek Basehore

Devicetree systems can set panel orientation via a panel binding, but
there's no way, as is, to propagate this setting to the connector,
where the property need to be added.
To address this, this patch sets orientation, as well as other fixed
values for the panel, in the drm_panel_attach function. These values
are stored from probe in the drm_panel struct.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
 drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++
 include/drm/drm_panel.h     | 14 ++++++++++++++
 2 files changed, 42 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index 169bab54d52d..ca01095470a9 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove);
  */
 int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector)
 {
+	struct drm_display_info *info;
+
 	if (panel->connector)
 		return -EBUSY;
 
 	panel->connector = connector;
 	panel->drm = connector->dev;
+	info = &connector->display_info;
+	info->width_mm = panel->width_mm;
+	info->height_mm = panel->height_mm;
+	info->bpc = panel->bpc;
+	info->panel_orientation = panel->orientation;
+	info->bus_flags = panel->bus_flags;
+	if (panel->bus_formats)
+		drm_display_info_set_bus_formats(&connector->display_info,
+						 panel->bus_formats,
+						 panel->num_bus_formats);
 
 	return 0;
 }
@@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach);
  */
 int drm_panel_detach(struct drm_panel *panel)
 {
+	struct drm_display_info *info;
+
+	if (!panel->connector)
+		goto out;
+
+	info = &panel->connector->display_info;
+	info->width_mm = 0;
+	info->height_mm = 0;
+	info->bpc = 0;
+	info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+	info->bus_flags = 0;
+	kfree(info->bus_formats);
+	info->bus_formats = NULL;
+	info->num_bus_formats = 0;
+
+out:
 	panel->connector = NULL;
 	panel->drm = NULL;
 
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index a18c59f136ab..1760c11e0298 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -39,6 +39,8 @@ enum drm_panel_orientation;
  * struct drm_panel_funcs - perform operations on a given panel
  * @disable: disable panel (turn off back light, etc.)
  * @unprepare: turn off panel
+ * @detach: detach panel->connector (clear internal state, etc.)
+ * @attach: attach panel->connector (update internal state, etc.)
  * @prepare: turn on panel and perform set up
  * @enable: enable panel (turn on back light, etc.)
  * @get_modes: add modes to the connector that the panel is attached to and
@@ -95,6 +97,18 @@ struct drm_panel {
 
 	const struct drm_panel_funcs *funcs;
 
+	/*
+	 * panel information to be set in the connector when the panel is
+	 * attached.
+	 */
+	unsigned int width_mm;
+	unsigned int height_mm;
+	unsigned int bpc;
+	int orientation;
+	const u32 *bus_formats;
+	unsigned int num_bus_formats;
+	u32 bus_flags;
+
 	struct list_head list;
 };
 
-- 
2.22.0.410.gd8fdbe21b5-goog


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v6 2/4] drm/panel: set display info in panel attach
@ 2019-07-09 22:58   ` Derek Basehore
  0 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Derek Basehore, Philipp Zabel, Maxime Ripard, Sam Ravnborg,
	intel-gfx, David Airlie, Matthias Brugger, dri-devel, CK Hu,
	linux-mediatek, linux-arm-kernel

Devicetree systems can set panel orientation via a panel binding, but
there's no way, as is, to propagate this setting to the connector,
where the property need to be added.
To address this, this patch sets orientation, as well as other fixed
values for the panel, in the drm_panel_attach function. These values
are stored from probe in the drm_panel struct.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
 drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++
 include/drm/drm_panel.h     | 14 ++++++++++++++
 2 files changed, 42 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index 169bab54d52d..ca01095470a9 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove);
  */
 int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector)
 {
+	struct drm_display_info *info;
+
 	if (panel->connector)
 		return -EBUSY;
 
 	panel->connector = connector;
 	panel->drm = connector->dev;
+	info = &connector->display_info;
+	info->width_mm = panel->width_mm;
+	info->height_mm = panel->height_mm;
+	info->bpc = panel->bpc;
+	info->panel_orientation = panel->orientation;
+	info->bus_flags = panel->bus_flags;
+	if (panel->bus_formats)
+		drm_display_info_set_bus_formats(&connector->display_info,
+						 panel->bus_formats,
+						 panel->num_bus_formats);
 
 	return 0;
 }
@@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach);
  */
 int drm_panel_detach(struct drm_panel *panel)
 {
+	struct drm_display_info *info;
+
+	if (!panel->connector)
+		goto out;
+
+	info = &panel->connector->display_info;
+	info->width_mm = 0;
+	info->height_mm = 0;
+	info->bpc = 0;
+	info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+	info->bus_flags = 0;
+	kfree(info->bus_formats);
+	info->bus_formats = NULL;
+	info->num_bus_formats = 0;
+
+out:
 	panel->connector = NULL;
 	panel->drm = NULL;
 
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index a18c59f136ab..1760c11e0298 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -39,6 +39,8 @@ enum drm_panel_orientation;
  * struct drm_panel_funcs - perform operations on a given panel
  * @disable: disable panel (turn off back light, etc.)
  * @unprepare: turn off panel
+ * @detach: detach panel->connector (clear internal state, etc.)
+ * @attach: attach panel->connector (update internal state, etc.)
  * @prepare: turn on panel and perform set up
  * @enable: enable panel (turn on back light, etc.)
  * @get_modes: add modes to the connector that the panel is attached to and
@@ -95,6 +97,18 @@ struct drm_panel {
 
 	const struct drm_panel_funcs *funcs;
 
+	/*
+	 * panel information to be set in the connector when the panel is
+	 * attached.
+	 */
+	unsigned int width_mm;
+	unsigned int height_mm;
+	unsigned int bpc;
+	int orientation;
+	const u32 *bus_formats;
+	unsigned int num_bus_formats;
+	u32 bus_flags;
+
 	struct list_head list;
 };
 
-- 
2.22.0.410.gd8fdbe21b5-goog

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v6 2/4] drm/panel: set display info in panel attach
@ 2019-07-09 22:58   ` Derek Basehore
  0 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Derek Basehore, Philipp Zabel, Maxime Ripard, Sam Ravnborg,
	intel-gfx, Joonas Lahtinen, Maarten Lankhorst, Jani Nikula,
	David Airlie, Thierry Reding, Matthias Brugger, dri-devel,
	Daniel Vetter, Rodrigo Vivi, CK Hu, linux-mediatek, Sean Paul,
	linux-arm-kernel

Devicetree systems can set panel orientation via a panel binding, but
there's no way, as is, to propagate this setting to the connector,
where the property need to be added.
To address this, this patch sets orientation, as well as other fixed
values for the panel, in the drm_panel_attach function. These values
are stored from probe in the drm_panel struct.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
 drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++
 include/drm/drm_panel.h     | 14 ++++++++++++++
 2 files changed, 42 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index 169bab54d52d..ca01095470a9 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove);
  */
 int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector)
 {
+	struct drm_display_info *info;
+
 	if (panel->connector)
 		return -EBUSY;
 
 	panel->connector = connector;
 	panel->drm = connector->dev;
+	info = &connector->display_info;
+	info->width_mm = panel->width_mm;
+	info->height_mm = panel->height_mm;
+	info->bpc = panel->bpc;
+	info->panel_orientation = panel->orientation;
+	info->bus_flags = panel->bus_flags;
+	if (panel->bus_formats)
+		drm_display_info_set_bus_formats(&connector->display_info,
+						 panel->bus_formats,
+						 panel->num_bus_formats);
 
 	return 0;
 }
@@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach);
  */
 int drm_panel_detach(struct drm_panel *panel)
 {
+	struct drm_display_info *info;
+
+	if (!panel->connector)
+		goto out;
+
+	info = &panel->connector->display_info;
+	info->width_mm = 0;
+	info->height_mm = 0;
+	info->bpc = 0;
+	info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+	info->bus_flags = 0;
+	kfree(info->bus_formats);
+	info->bus_formats = NULL;
+	info->num_bus_formats = 0;
+
+out:
 	panel->connector = NULL;
 	panel->drm = NULL;
 
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index a18c59f136ab..1760c11e0298 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -39,6 +39,8 @@ enum drm_panel_orientation;
  * struct drm_panel_funcs - perform operations on a given panel
  * @disable: disable panel (turn off back light, etc.)
  * @unprepare: turn off panel
+ * @detach: detach panel->connector (clear internal state, etc.)
+ * @attach: attach panel->connector (update internal state, etc.)
  * @prepare: turn on panel and perform set up
  * @enable: enable panel (turn on back light, etc.)
  * @get_modes: add modes to the connector that the panel is attached to and
@@ -95,6 +97,18 @@ struct drm_panel {
 
 	const struct drm_panel_funcs *funcs;
 
+	/*
+	 * panel information to be set in the connector when the panel is
+	 * attached.
+	 */
+	unsigned int width_mm;
+	unsigned int height_mm;
+	unsigned int bpc;
+	int orientation;
+	const u32 *bus_formats;
+	unsigned int num_bus_formats;
+	u32 bus_flags;
+
 	struct list_head list;
 };
 
-- 
2.22.0.410.gd8fdbe21b5-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v6 3/4] drm/connector: Split out orientation quirk detection
  2019-07-09 22:58 ` Derek Basehore
  (?)
@ 2019-07-09 22:58   ` Derek Basehore
  -1 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Maarten Lankhorst, Maxime Ripard, Sean Paul, David Airlie,
	Daniel Vetter, Thierry Reding, Sam Ravnborg, Jani Nikula,
	Joonas Lahtinen, Rodrigo Vivi, CK Hu, Philipp Zabel,
	Matthias Brugger, dri-devel, intel-gfx, linux-arm-kernel,
	linux-mediatek, Derek Basehore

Not every platform needs quirk detection for panel orientation, so
split the drm_connector_init_panel_orientation_property into two
functions. One for platforms without the need for quirks, and the
other for platforms that need quirks.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
 drivers/gpu/drm/drm_connector.c         | 45 ++++++++++++++++++-------
 drivers/gpu/drm/i915/display/intel_dp.c |  4 +--
 drivers/gpu/drm/i915/display/vlv_dsi.c  |  2 +-
 include/drm/drm_connector.h             |  2 ++
 4 files changed, 38 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index b3f2cf7eae9c..52777d647494 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1892,31 +1892,23 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
  * drm_connector_init_panel_orientation_property -
  *	initialize the connecters panel_orientation property
  * @connector: connector for which to init the panel-orientation property.
- * @width: width in pixels of the panel, used for panel quirk detection
- * @height: height in pixels of the panel, used for panel quirk detection
  *
  * This function should only be called for built-in panels, after setting
  * connector->display_info.panel_orientation first (if known).
  *
- * This function will check for platform specific (e.g. DMI based) quirks
- * overriding display_info.panel_orientation first, then if panel_orientation
- * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
- * "panel orientation" property to the connector.
+ * This function will check if the panel_orientation is not
+ * DRM_MODE_PANEL_ORIENTATION_UNKNOWN. If not, it will attach the "panel
+ * orientation" property to the connector.
  *
  * Returns:
  * Zero on success, negative errno on failure.
  */
 int drm_connector_init_panel_orientation_property(
-	struct drm_connector *connector, int width, int height)
+	struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_display_info *info = &connector->display_info;
 	struct drm_property *prop;
-	int orientation_quirk;
-
-	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
-	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
-		info->panel_orientation = orientation_quirk;
 
 	if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
 		return 0;
@@ -1939,6 +1931,35 @@ int drm_connector_init_panel_orientation_property(
 }
 EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
 
+/**
+ * drm_connector_init_panel_orientation_property_quirk -
+ *	initialize the connecters panel_orientation property with a quirk
+ *	override
+ * @connector: connector for which to init the panel-orientation property.
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * This function will check for platform specific (e.g. DMI based) quirks
+ * overriding display_info.panel_orientation first, then if panel_orientation
+ * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
+ * "panel orientation" property to the connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property_quirk(
+	struct drm_connector *connector, int width, int height)
+{
+	int orientation_quirk;
+
+	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		connector->display_info.panel_orientation = orientation_quirk;
+
+	return drm_connector_init_panel_orientation_property(connector);
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property_quirk);
+
 int drm_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 8f7188d71d08..45b637419085 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -7068,8 +7068,8 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 	intel_panel_setup_backlight(connector, pipe);
 
 	if (fixed_mode)
-		drm_connector_init_panel_orientation_property(
-			connector, fixed_mode->hdisplay, fixed_mode->vdisplay);
+		drm_connector_init_panel_orientation_property_quirk(connector,
+				fixed_mode->hdisplay, fixed_mode->vdisplay);
 
 	return true;
 
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index e272d826210a..dd7fa806f95c 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1662,7 +1662,7 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
 
 		connector->base.display_info.panel_orientation =
 			vlv_dsi_get_panel_orientation(connector);
-		drm_connector_init_panel_orientation_property(
+		drm_connector_init_panel_orientation_property_quirk(
 				&connector->base,
 				connector->panel.fixed_mode->hdisplay,
 				connector->panel.fixed_mode->vdisplay);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index ca745d9feaf5..940254b06767 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1512,6 +1512,8 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
 void drm_connector_set_vrr_capable_property(
 		struct drm_connector *connector, bool capable);
 int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector);
+int drm_connector_init_panel_orientation_property_quirk(
 	struct drm_connector *connector, int width, int height);
 int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
 					  int min, int max);
-- 
2.22.0.410.gd8fdbe21b5-goog


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v6 3/4] drm/connector: Split out orientation quirk detection
@ 2019-07-09 22:58   ` Derek Basehore
  0 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Derek Basehore, Philipp Zabel, Maxime Ripard, Sam Ravnborg,
	intel-gfx, David Airlie, Matthias Brugger, dri-devel, CK Hu,
	linux-mediatek, linux-arm-kernel

Not every platform needs quirk detection for panel orientation, so
split the drm_connector_init_panel_orientation_property into two
functions. One for platforms without the need for quirks, and the
other for platforms that need quirks.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
 drivers/gpu/drm/drm_connector.c         | 45 ++++++++++++++++++-------
 drivers/gpu/drm/i915/display/intel_dp.c |  4 +--
 drivers/gpu/drm/i915/display/vlv_dsi.c  |  2 +-
 include/drm/drm_connector.h             |  2 ++
 4 files changed, 38 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index b3f2cf7eae9c..52777d647494 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1892,31 +1892,23 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
  * drm_connector_init_panel_orientation_property -
  *	initialize the connecters panel_orientation property
  * @connector: connector for which to init the panel-orientation property.
- * @width: width in pixels of the panel, used for panel quirk detection
- * @height: height in pixels of the panel, used for panel quirk detection
  *
  * This function should only be called for built-in panels, after setting
  * connector->display_info.panel_orientation first (if known).
  *
- * This function will check for platform specific (e.g. DMI based) quirks
- * overriding display_info.panel_orientation first, then if panel_orientation
- * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
- * "panel orientation" property to the connector.
+ * This function will check if the panel_orientation is not
+ * DRM_MODE_PANEL_ORIENTATION_UNKNOWN. If not, it will attach the "panel
+ * orientation" property to the connector.
  *
  * Returns:
  * Zero on success, negative errno on failure.
  */
 int drm_connector_init_panel_orientation_property(
-	struct drm_connector *connector, int width, int height)
+	struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_display_info *info = &connector->display_info;
 	struct drm_property *prop;
-	int orientation_quirk;
-
-	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
-	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
-		info->panel_orientation = orientation_quirk;
 
 	if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
 		return 0;
@@ -1939,6 +1931,35 @@ int drm_connector_init_panel_orientation_property(
 }
 EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
 
+/**
+ * drm_connector_init_panel_orientation_property_quirk -
+ *	initialize the connecters panel_orientation property with a quirk
+ *	override
+ * @connector: connector for which to init the panel-orientation property.
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * This function will check for platform specific (e.g. DMI based) quirks
+ * overriding display_info.panel_orientation first, then if panel_orientation
+ * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
+ * "panel orientation" property to the connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property_quirk(
+	struct drm_connector *connector, int width, int height)
+{
+	int orientation_quirk;
+
+	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		connector->display_info.panel_orientation = orientation_quirk;
+
+	return drm_connector_init_panel_orientation_property(connector);
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property_quirk);
+
 int drm_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 8f7188d71d08..45b637419085 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -7068,8 +7068,8 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 	intel_panel_setup_backlight(connector, pipe);
 
 	if (fixed_mode)
-		drm_connector_init_panel_orientation_property(
-			connector, fixed_mode->hdisplay, fixed_mode->vdisplay);
+		drm_connector_init_panel_orientation_property_quirk(connector,
+				fixed_mode->hdisplay, fixed_mode->vdisplay);
 
 	return true;
 
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index e272d826210a..dd7fa806f95c 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1662,7 +1662,7 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
 
 		connector->base.display_info.panel_orientation =
 			vlv_dsi_get_panel_orientation(connector);
-		drm_connector_init_panel_orientation_property(
+		drm_connector_init_panel_orientation_property_quirk(
 				&connector->base,
 				connector->panel.fixed_mode->hdisplay,
 				connector->panel.fixed_mode->vdisplay);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index ca745d9feaf5..940254b06767 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1512,6 +1512,8 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
 void drm_connector_set_vrr_capable_property(
 		struct drm_connector *connector, bool capable);
 int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector);
+int drm_connector_init_panel_orientation_property_quirk(
 	struct drm_connector *connector, int width, int height);
 int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
 					  int min, int max);
-- 
2.22.0.410.gd8fdbe21b5-goog

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v6 3/4] drm/connector: Split out orientation quirk detection
@ 2019-07-09 22:58   ` Derek Basehore
  0 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Derek Basehore, Philipp Zabel, Maxime Ripard, Sam Ravnborg,
	intel-gfx, Joonas Lahtinen, Maarten Lankhorst, Jani Nikula,
	David Airlie, Thierry Reding, Matthias Brugger, dri-devel,
	Daniel Vetter, Rodrigo Vivi, CK Hu, linux-mediatek, Sean Paul,
	linux-arm-kernel

Not every platform needs quirk detection for panel orientation, so
split the drm_connector_init_panel_orientation_property into two
functions. One for platforms without the need for quirks, and the
other for platforms that need quirks.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
 drivers/gpu/drm/drm_connector.c         | 45 ++++++++++++++++++-------
 drivers/gpu/drm/i915/display/intel_dp.c |  4 +--
 drivers/gpu/drm/i915/display/vlv_dsi.c  |  2 +-
 include/drm/drm_connector.h             |  2 ++
 4 files changed, 38 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index b3f2cf7eae9c..52777d647494 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1892,31 +1892,23 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
  * drm_connector_init_panel_orientation_property -
  *	initialize the connecters panel_orientation property
  * @connector: connector for which to init the panel-orientation property.
- * @width: width in pixels of the panel, used for panel quirk detection
- * @height: height in pixels of the panel, used for panel quirk detection
  *
  * This function should only be called for built-in panels, after setting
  * connector->display_info.panel_orientation first (if known).
  *
- * This function will check for platform specific (e.g. DMI based) quirks
- * overriding display_info.panel_orientation first, then if panel_orientation
- * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
- * "panel orientation" property to the connector.
+ * This function will check if the panel_orientation is not
+ * DRM_MODE_PANEL_ORIENTATION_UNKNOWN. If not, it will attach the "panel
+ * orientation" property to the connector.
  *
  * Returns:
  * Zero on success, negative errno on failure.
  */
 int drm_connector_init_panel_orientation_property(
-	struct drm_connector *connector, int width, int height)
+	struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_display_info *info = &connector->display_info;
 	struct drm_property *prop;
-	int orientation_quirk;
-
-	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
-	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
-		info->panel_orientation = orientation_quirk;
 
 	if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
 		return 0;
@@ -1939,6 +1931,35 @@ int drm_connector_init_panel_orientation_property(
 }
 EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
 
+/**
+ * drm_connector_init_panel_orientation_property_quirk -
+ *	initialize the connecters panel_orientation property with a quirk
+ *	override
+ * @connector: connector for which to init the panel-orientation property.
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * This function will check for platform specific (e.g. DMI based) quirks
+ * overriding display_info.panel_orientation first, then if panel_orientation
+ * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
+ * "panel orientation" property to the connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property_quirk(
+	struct drm_connector *connector, int width, int height)
+{
+	int orientation_quirk;
+
+	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		connector->display_info.panel_orientation = orientation_quirk;
+
+	return drm_connector_init_panel_orientation_property(connector);
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property_quirk);
+
 int drm_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 8f7188d71d08..45b637419085 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -7068,8 +7068,8 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 	intel_panel_setup_backlight(connector, pipe);
 
 	if (fixed_mode)
-		drm_connector_init_panel_orientation_property(
-			connector, fixed_mode->hdisplay, fixed_mode->vdisplay);
+		drm_connector_init_panel_orientation_property_quirk(connector,
+				fixed_mode->hdisplay, fixed_mode->vdisplay);
 
 	return true;
 
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index e272d826210a..dd7fa806f95c 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1662,7 +1662,7 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
 
 		connector->base.display_info.panel_orientation =
 			vlv_dsi_get_panel_orientation(connector);
-		drm_connector_init_panel_orientation_property(
+		drm_connector_init_panel_orientation_property_quirk(
 				&connector->base,
 				connector->panel.fixed_mode->hdisplay,
 				connector->panel.fixed_mode->vdisplay);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index ca745d9feaf5..940254b06767 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1512,6 +1512,8 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
 void drm_connector_set_vrr_capable_property(
 		struct drm_connector *connector, bool capable);
 int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector);
+int drm_connector_init_panel_orientation_property_quirk(
 	struct drm_connector *connector, int width, int height);
 int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
 					  int min, int max);
-- 
2.22.0.410.gd8fdbe21b5-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v6 4/4] drm/mtk: add panel orientation property
  2019-07-09 22:58 ` Derek Basehore
  (?)
@ 2019-07-09 22:58   ` Derek Basehore
  -1 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Maarten Lankhorst, Maxime Ripard, Sean Paul, David Airlie,
	Daniel Vetter, Thierry Reding, Sam Ravnborg, Jani Nikula,
	Joonas Lahtinen, Rodrigo Vivi, CK Hu, Philipp Zabel,
	Matthias Brugger, dri-devel, intel-gfx, linux-arm-kernel,
	linux-mediatek, Derek Basehore

This inits the panel orientation property for the mediatek dsi driver
if the panel orientation (connector.display_info.panel_orientation) is
not DRM_MODE_PANEL_ORIENTATION_UNKNOWN.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index b91c4616644a..2920458ae2fb 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -790,10 +790,18 @@ static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi)
 			DRM_ERROR("Failed to attach panel to drm\n");
 			goto err_connector_cleanup;
 		}
+
+		ret = drm_connector_init_panel_orientation_property(&dsi->conn);
+		if (ret) {
+			DRM_ERROR("Failed to init panel orientation\n");
+			goto err_panel_detach;
+		}
 	}
 
 	return 0;
 
+err_panel_detach:
+	drm_panel_detach(dsi->panel);
 err_connector_cleanup:
 	drm_connector_cleanup(&dsi->conn);
 	return ret;
-- 
2.22.0.410.gd8fdbe21b5-goog


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v6 4/4] drm/mtk: add panel orientation property
@ 2019-07-09 22:58   ` Derek Basehore
  0 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Derek Basehore, Philipp Zabel, Maxime Ripard, Sam Ravnborg,
	intel-gfx, David Airlie, Matthias Brugger, dri-devel, CK Hu,
	linux-mediatek, linux-arm-kernel

This inits the panel orientation property for the mediatek dsi driver
if the panel orientation (connector.display_info.panel_orientation) is
not DRM_MODE_PANEL_ORIENTATION_UNKNOWN.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index b91c4616644a..2920458ae2fb 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -790,10 +790,18 @@ static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi)
 			DRM_ERROR("Failed to attach panel to drm\n");
 			goto err_connector_cleanup;
 		}
+
+		ret = drm_connector_init_panel_orientation_property(&dsi->conn);
+		if (ret) {
+			DRM_ERROR("Failed to init panel orientation\n");
+			goto err_panel_detach;
+		}
 	}
 
 	return 0;
 
+err_panel_detach:
+	drm_panel_detach(dsi->panel);
 err_connector_cleanup:
 	drm_connector_cleanup(&dsi->conn);
 	return ret;
-- 
2.22.0.410.gd8fdbe21b5-goog

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v6 4/4] drm/mtk: add panel orientation property
@ 2019-07-09 22:58   ` Derek Basehore
  0 siblings, 0 replies; 15+ messages in thread
From: Derek Basehore @ 2019-07-09 22:58 UTC (permalink / raw)
  To: linux-kernel
  Cc: Derek Basehore, Philipp Zabel, Maxime Ripard, Sam Ravnborg,
	intel-gfx, Joonas Lahtinen, Maarten Lankhorst, Jani Nikula,
	David Airlie, Thierry Reding, Matthias Brugger, dri-devel,
	Daniel Vetter, Rodrigo Vivi, CK Hu, linux-mediatek, Sean Paul,
	linux-arm-kernel

This inits the panel orientation property for the mediatek dsi driver
if the panel orientation (connector.display_info.panel_orientation) is
not DRM_MODE_PANEL_ORIENTATION_UNKNOWN.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index b91c4616644a..2920458ae2fb 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -790,10 +790,18 @@ static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi)
 			DRM_ERROR("Failed to attach panel to drm\n");
 			goto err_connector_cleanup;
 		}
+
+		ret = drm_connector_init_panel_orientation_property(&dsi->conn);
+		if (ret) {
+			DRM_ERROR("Failed to init panel orientation\n");
+			goto err_panel_detach;
+		}
 	}
 
 	return 0;
 
+err_panel_detach:
+	drm_panel_detach(dsi->panel);
 err_connector_cleanup:
 	drm_connector_cleanup(&dsi->conn);
 	return ret;
-- 
2.22.0.410.gd8fdbe21b5-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 15+ messages in thread

* ✗ Fi.CI.BAT: failure for Panel rotation patches (rev6)
  2019-07-09 22:58 ` Derek Basehore
                   ` (4 preceding siblings ...)
  (?)
@ 2019-07-09 23:05 ` Patchwork
  -1 siblings, 0 replies; 15+ messages in thread
From: Patchwork @ 2019-07-09 23:05 UTC (permalink / raw)
  To: Derek Basehore; +Cc: intel-gfx

== Series Details ==

Series: Panel rotation patches (rev6)
URL   : https://patchwork.freedesktop.org/series/61870/
State : failure

== Summary ==

CALL    scripts/checksyscalls.sh
  CALL    scripts/atomic/check-atomics.sh
  DESCEND  objtool
  CHK     include/generated/compile.h
  AR      drivers/gpu/drm/i915/built-in.a
  CC [M]  drivers/gpu/drm/i915/header_test_i915_active_types.o
  CC [M]  drivers/gpu/drm/i915/header_test_i915_debugfs.o
  CC [M]  drivers/gpu/drm/i915/header_test_i915_drv.o
  CC [M]  drivers/gpu/drm/i915/header_test_i915_fixed.o
  CC [M]  drivers/gpu/drm/i915/header_test_i915_gem_gtt.o
  CC [M]  drivers/gpu/drm/i915/header_test_i915_globals.o
  CC [M]  drivers/gpu/drm/i915/header_test_i915_irq.o
  CC [M]  drivers/gpu/drm/i915/header_test_i915_params.o
  CC [M]  drivers/gpu/drm/i915/header_test_i915_priolist_types.o
  CC [M]  drivers/gpu/drm/i915/header_test_i915_pvinfo.o
  CC [M]  drivers/gpu/drm/i915/header_test_i915_reg.o
  CC [M]  drivers/gpu/drm/i915/header_test_i915_scheduler_types.o
  CC [M]  drivers/gpu/drm/i915/header_test_i915_utils.o
  CC [M]  drivers/gpu/drm/i915/header_test_i915_vgpu.o
  CC [M]  drivers/gpu/drm/i915/header_test_intel_csr.o
  CC [M]  drivers/gpu/drm/i915/header_test_intel_drv.o
  CC [M]  drivers/gpu/drm/i915/header_test_intel_guc_ct.o
  CC [M]  drivers/gpu/drm/i915/header_test_intel_guc_fwif.o
  CC [M]  drivers/gpu/drm/i915/header_test_intel_guc_reg.o
  CC [M]  drivers/gpu/drm/i915/header_test_intel_gvt.o
  CC [M]  drivers/gpu/drm/i915/header_test_intel_pm.o
  CC [M]  drivers/gpu/drm/i915/header_test_intel_runtime_pm.o
  CC [M]  drivers/gpu/drm/i915/header_test_intel_sideband.o
  CC [M]  drivers/gpu/drm/i915/header_test_intel_uc_fw.o
  CC [M]  drivers/gpu/drm/i915/header_test_intel_uncore.o
  CC [M]  drivers/gpu/drm/i915/header_test_intel_wakeref.o
  CC [M]  drivers/gpu/drm/i915/display/icl_dsi.o
drivers/gpu/drm/i915/display/icl_dsi.c: In function ‘icl_dsi_add_properties’:
drivers/gpu/drm/i915/display/icl_dsi.c:1526:2: error: too many arguments to function ‘drm_connector_init_panel_orientation_property’
  drm_connector_init_panel_orientation_property(&connector->base,
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ./include/drm/drm_modes.h:33:0,
                 from ./include/drm/drm_crtc.h:40,
                 from ./include/drm/drm_atomic_helper.h:31,
                 from drivers/gpu/drm/i915/display/icl_dsi.c:28:
./include/drm/drm_connector.h:1517:5: note: declared here
 int drm_connector_init_panel_orientation_property(
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
scripts/Makefile.build:278: recipe for target 'drivers/gpu/drm/i915/display/icl_dsi.o' failed
make[4]: *** [drivers/gpu/drm/i915/display/icl_dsi.o] Error 1
scripts/Makefile.build:489: recipe for target 'drivers/gpu/drm/i915' failed
make[3]: *** [drivers/gpu/drm/i915] Error 2
scripts/Makefile.build:489: recipe for target 'drivers/gpu/drm' failed
make[2]: *** [drivers/gpu/drm] Error 2
scripts/Makefile.build:489: recipe for target 'drivers/gpu' failed
make[1]: *** [drivers/gpu] Error 2
Makefile:1071: recipe for target 'drivers' failed
make: *** [drivers] Error 2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2019-07-09 23:05 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-09 22:58 [PATCH v6 0/4] Panel rotation patches Derek Basehore
2019-07-09 22:58 ` Derek Basehore
2019-07-09 22:58 ` [PATCH v6 1/4] drm/panel: Add helper for reading DT rotation Derek Basehore
2019-07-09 22:58   ` Derek Basehore
2019-07-09 22:58   ` Derek Basehore
2019-07-09 22:58 ` [PATCH v6 2/4] drm/panel: set display info in panel attach Derek Basehore
2019-07-09 22:58   ` Derek Basehore
2019-07-09 22:58   ` Derek Basehore
2019-07-09 22:58 ` [PATCH v6 3/4] drm/connector: Split out orientation quirk detection Derek Basehore
2019-07-09 22:58   ` Derek Basehore
2019-07-09 22:58   ` Derek Basehore
2019-07-09 22:58 ` [PATCH v6 4/4] drm/mtk: add panel orientation property Derek Basehore
2019-07-09 22:58   ` Derek Basehore
2019-07-09 22:58   ` Derek Basehore
2019-07-09 23:05 ` ✗ Fi.CI.BAT: failure for Panel rotation patches (rev6) Patchwork

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.