[PATCH 1/2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K

[PATCH 1/2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K

[Manasi Navare]

On TGL+ we support 8K display resolution, hence bump up the vertical
active limits to 4320 in intel_mode_valid()

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index f07081815b80..0d5c8af01f54 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
 			   DRM_MODE_FLAG_CLKDIV2))
 		return MODE_BAD;
 
-	if (INTEL_GEN(dev_priv) >= 9 ||
-	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
+	if (INTEL_GEN(dev_priv) >=12) {
+		hdisplay_max = 8192;
+		vdisplay_max = 4320;
+		htotal_max = 8192;
+		vtotal_max = 8192;
+	} else if (INTEL_GEN(dev_priv) >= 9 ||
+		   IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
 		hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
 		vdisplay_max = 4096;
 		htotal_max = 8192;
-- 
2.19.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 2/2] drm/i915/display/tgl: Bump up the plane/fb height to support 8K

[Manasi Navare]

On TGL+, the plane height for 8K planes can be 4320, so bump it up
To support 4320, we need to increase the number of bits used to
read plane_height to 13 as opposed to older 12 bits.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 21 ++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 0d5c8af01f54..be9a54cb5ecc 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct drm_framebuffer *fb,
 	return 5120;
 }
 
+static int skl_max_plane_height(void)
+{
+	return 4096;
+}
+
+static int tgl_max_plane_height(void)
+{
+	return 4320;
+}
+
 static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,
 					   int main_x, int main_y, u32 main_offset)
 {
@@ -3391,9 +3401,13 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	int w = drm_rect_width(&plane_state->base.src) >> 16;
 	int h = drm_rect_height(&plane_state->base.src) >> 16;
 	int max_width;
-	int max_height = 4096;
+	int max_height;
 	u32 alignment, offset, aux_offset = plane_state->color_plane[1].offset;
 
+	if (INTEL_GEN(dev_priv) >= 12)
+		max_height = tgl_max_plane_height();
+	else
+		max_height = skl_max_plane_height();
 	if (INTEL_GEN(dev_priv) >= 11)
 		max_width = icl_max_plane_width(fb, 0, rotation);
 	else if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
@@ -9865,7 +9879,10 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
 	offset = I915_READ(PLANE_OFFSET(pipe, plane_id));
 
 	val = I915_READ(PLANE_SIZE(pipe, plane_id));
-	fb->height = ((val >> 16) & 0xfff) + 1;
+	if (INTEL_GEN(dev_priv) >= 12)
+		fb->height = ((val >> 16) & 0x1fff) + 1;
+	else
+		fb->height = ((val >> 16) & 0xfff) + 1;
 	fb->width = ((val >> 0) & 0x1fff) + 1;
 
 	val = I915_READ(PLANE_STRIDE(pipe, plane_id));
-- 
2.19.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 2/2] drm/i915/display/tgl: Bump up the plane/fb height to support 8K

[Souza, Jose]

On Tue, 2019-07-09 at 14:47 -0700, Manasi Navare wrote:
> On TGL+, the plane height for 8K planes can be 4320, so bump it up
> To support 4320, we need to increase the number of bits used to
> read plane_height to 13 as opposed to older 12 bits.
> 
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 21
> ++++++++++++++++++--
>  1 file changed, 19 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> b/drivers/gpu/drm/i915/display/intel_display.c
> index 0d5c8af01f54..be9a54cb5ecc 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct
> drm_framebuffer *fb,
>  	return 5120;
>  }
>  
> +static int skl_max_plane_height(void)
> +{
> +	return 4096;
> +}
> +
> +static int tgl_max_plane_height(void)
> +{
> +	return 4320;
> +}
> +
>  static bool skl_check_main_ccs_coordinates(struct intel_plane_state
> *plane_state,
>  					   int main_x, int main_y, u32
> main_offset)
>  {
> @@ -3391,9 +3401,13 @@ static int skl_check_main_surface(struct
> intel_plane_state *plane_state)
>  	int w = drm_rect_width(&plane_state->base.src) >> 16;
>  	int h = drm_rect_height(&plane_state->base.src) >> 16;
>  	int max_width;
> -	int max_height = 4096;
> +	int max_height;
>  	u32 alignment, offset, aux_offset = plane_state-
> >color_plane[1].offset;
>  
> +	if (INTEL_GEN(dev_priv) >= 12)
> +		max_height = tgl_max_plane_height();
> +	else
> +		max_height = skl_max_plane_height();

Give a line between max_width block, also I would move the height after
the width.

>  	if (INTEL_GEN(dev_priv) >= 11)
>  		max_width = icl_max_plane_width(fb, 0, rotation);
>  	else if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
> @@ -9865,7 +9879,10 @@ skylake_get_initial_plane_config(struct
> intel_crtc *crtc,
>  	offset = I915_READ(PLANE_OFFSET(pipe, plane_id));
>  
>  	val = I915_READ(PLANE_SIZE(pipe, plane_id));
> -	fb->height = ((val >> 16) & 0xfff) + 1;
> +	if (INTEL_GEN(dev_priv) >= 12)
> +		fb->height = ((val >> 16) & 0x1fff) + 1;
> +	else
> +		fb->height = ((val >> 16) & 0xfff) + 1;
>  	fb->width = ((val >> 0) & 0x1fff) + 1;
>  
>  	val = I915_READ(PLANE_STRIDE(pipe, plane_id));
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 2/2] drm/i915/display/tgl: Bump up the plane/fb height to support 8K

[Manasi Navare]

On Tue, Jul 09, 2019 at 04:07:23PM -0700, Souza, Jose wrote:
> On Tue, 2019-07-09 at 14:47 -0700, Manasi Navare wrote:
> > On TGL+, the plane height for 8K planes can be 4320, so bump it up
> > To support 4320, we need to increase the number of bits used to
> > read plane_height to 13 as opposed to older 12 bits.
> > 
> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_display.c | 21
> > ++++++++++++++++++--
> >  1 file changed, 19 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index 0d5c8af01f54..be9a54cb5ecc 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct
> > drm_framebuffer *fb,
> >  	return 5120;
> >  }
> >  
> > +static int skl_max_plane_height(void)
> > +{
> > +	return 4096;
> > +}
> > +
> > +static int tgl_max_plane_height(void)
> > +{
> > +	return 4320;
> > +}
> > +
> >  static bool skl_check_main_ccs_coordinates(struct intel_plane_state
> > *plane_state,
> >  					   int main_x, int main_y, u32
> > main_offset)
> >  {
> > @@ -3391,9 +3401,13 @@ static int skl_check_main_surface(struct
> > intel_plane_state *plane_state)
> >  	int w = drm_rect_width(&plane_state->base.src) >> 16;
> >  	int h = drm_rect_height(&plane_state->base.src) >> 16;
> >  	int max_width;
> > -	int max_height = 4096;
> > +	int max_height;
> >  	u32 alignment, offset, aux_offset = plane_state-
> > >color_plane[1].offset;
> >  
> > +	if (INTEL_GEN(dev_priv) >= 12)
> > +		max_height = tgl_max_plane_height();
> > +	else
> > +		max_height = skl_max_plane_height();
> 
> Give a line between max_width block, also I would move the height after
> the width.

Ok, will make this change, can I add your r-b with this change?

Manasi

> 
> >  	if (INTEL_GEN(dev_priv) >= 11)
> >  		max_width = icl_max_plane_width(fb, 0, rotation);
> >  	else if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
> > @@ -9865,7 +9879,10 @@ skylake_get_initial_plane_config(struct
> > intel_crtc *crtc,
> >  	offset = I915_READ(PLANE_OFFSET(pipe, plane_id));
> >  
> >  	val = I915_READ(PLANE_SIZE(pipe, plane_id));
> > -	fb->height = ((val >> 16) & 0xfff) + 1;
> > +	if (INTEL_GEN(dev_priv) >= 12)
> > +		fb->height = ((val >> 16) & 0x1fff) + 1;
> > +	else
> > +		fb->height = ((val >> 16) & 0xfff) + 1;
> >  	fb->width = ((val >> 0) & 0x1fff) + 1;
> >  
> >  	val = I915_READ(PLANE_STRIDE(pipe, plane_id));
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 2/2] drm/i915/display/tgl: Bump up the plane/fb height to support 8K

[Ville Syrjälä]

On Tue, Jul 09, 2019 at 02:47:35PM -0700, Manasi Navare wrote:
> On TGL+, the plane height for 8K planes can be 4320, so bump it up
> To support 4320, we need to increase the number of bits used to
> read plane_height to 13 as opposed to older 12 bits.
> 
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 21 ++++++++++++++++++--
>  1 file changed, 19 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 0d5c8af01f54..be9a54cb5ecc 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct drm_framebuffer *fb,
>  	return 5120;
>  }
>  
> +static int skl_max_plane_height(void)
> +{
> +	return 4096;
> +}
> +
> +static int tgl_max_plane_height(void)
> +{
> +	return 4320;

icl has this limit already.

> +}
> +
>  static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,
>  					   int main_x, int main_y, u32 main_offset)
>  {
> @@ -3391,9 +3401,13 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
>  	int w = drm_rect_width(&plane_state->base.src) >> 16;
>  	int h = drm_rect_height(&plane_state->base.src) >> 16;
>  	int max_width;
> -	int max_height = 4096;
> +	int max_height;
>  	u32 alignment, offset, aux_offset = plane_state->color_plane[1].offset;
>  
> +	if (INTEL_GEN(dev_priv) >= 12)
> +		max_height = tgl_max_plane_height();
> +	else
> +		max_height = skl_max_plane_height();
>  	if (INTEL_GEN(dev_priv) >= 11)
>  		max_width = icl_max_plane_width(fb, 0, rotation);
>  	else if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
> @@ -9865,7 +9879,10 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
>  	offset = I915_READ(PLANE_OFFSET(pipe, plane_id));
>  
>  	val = I915_READ(PLANE_SIZE(pipe, plane_id));
> -	fb->height = ((val >> 16) & 0xfff) + 1;
> +	if (INTEL_GEN(dev_priv) >= 12)
> +		fb->height = ((val >> 16) & 0x1fff) + 1;
> +	else
> +		fb->height = ((val >> 16) & 0xfff) + 1;
>  	fb->width = ((val >> 0) & 0x1fff) + 1;
>  
>  	val = I915_READ(PLANE_STRIDE(pipe, plane_id));
> -- 
> 2.19.1

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 2/2] drm/i915/display/tgl: Bump up the plane/fb height to support 8K

[Manasi Navare]

On Wed, Jul 10, 2019 at 10:18:38PM +0300, Ville Syrjälä wrote:
> On Tue, Jul 09, 2019 at 02:47:35PM -0700, Manasi Navare wrote:
> > On TGL+, the plane height for 8K planes can be 4320, so bump it up
> > To support 4320, we need to increase the number of bits used to
> > read plane_height to 13 as opposed to older 12 bits.
> > 
> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_display.c | 21 ++++++++++++++++++--
> >  1 file changed, 19 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index 0d5c8af01f54..be9a54cb5ecc 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct drm_framebuffer *fb,
> >  	return 5120;
> >  }
> >  
> > +static int skl_max_plane_height(void)
> > +{
> > +	return 4096;
> > +}
> > +
> > +static int tgl_max_plane_height(void)
> > +{
> > +	return 4320;

Yes icl does but we start supporting 8K from tgl, should this be changed to icl_max_plane_height()
and return 4320?

Manasi

> 
> icl has this limit already.
> 
> > +}
> > +
> >  static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,
> >  					   int main_x, int main_y, u32 main_offset)
> >  {
> > @@ -3391,9 +3401,13 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
> >  	int w = drm_rect_width(&plane_state->base.src) >> 16;
> >  	int h = drm_rect_height(&plane_state->base.src) >> 16;
> >  	int max_width;
> > -	int max_height = 4096;
> > +	int max_height;
> >  	u32 alignment, offset, aux_offset = plane_state->color_plane[1].offset;
> >  
> > +	if (INTEL_GEN(dev_priv) >= 12)
> > +		max_height = tgl_max_plane_height();
> > +	else
> > +		max_height = skl_max_plane_height();
> >  	if (INTEL_GEN(dev_priv) >= 11)
> >  		max_width = icl_max_plane_width(fb, 0, rotation);
> >  	else if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
> > @@ -9865,7 +9879,10 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
> >  	offset = I915_READ(PLANE_OFFSET(pipe, plane_id));
> >  
> >  	val = I915_READ(PLANE_SIZE(pipe, plane_id));
> > -	fb->height = ((val >> 16) & 0xfff) + 1;
> > +	if (INTEL_GEN(dev_priv) >= 12)
> > +		fb->height = ((val >> 16) & 0x1fff) + 1;
> > +	else
> > +		fb->height = ((val >> 16) & 0xfff) + 1;
> >  	fb->width = ((val >> 0) & 0x1fff) + 1;
> >  
> >  	val = I915_READ(PLANE_STRIDE(pipe, plane_id));
> > -- 
> > 2.19.1
> 
> -- 
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K

[Patchwork]

== Series Details ==

Series: series starting with [1/2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K
URL   : https://patchwork.freedesktop.org/series/63458/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
90e13413f8fd drm/i915/display/tgl: Bump up the mode vertical limits to support 8K
-:27: ERROR:SPACING: spaces required around that '>=' (ctx:WxV)
#27: FILE: drivers/gpu/drm/i915/display/intel_display.c:15767:
+	if (INTEL_GEN(dev_priv) >=12) {
 	                        ^

total: 1 errors, 0 warnings, 0 checks, 15 lines checked
dc819529058c drm/i915/display/tgl: Bump up the plane/fb height to support 8K

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K

[Patchwork]

== Series Details ==

Series: series starting with [1/2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K
URL   : https://patchwork.freedesktop.org/series/63458/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_6446 -> Patchwork_13591
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13591/

Known issues
------------

  Here are the changes found in Patchwork_13591 that come from known issues:

### IGT changes ###

#### Possible fixes ####

  * {igt@gem_ctx_switch@legacy-render}:
    - fi-cml-u:           [INCOMPLETE][1] ([fdo#110566]) -> [PASS][2]
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/fi-cml-u/igt@gem_ctx_switch@legacy-render.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13591/fi-cml-u/igt@gem_ctx_switch@legacy-render.html

  
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
  [fdo#109485]: https://bugs.freedesktop.org/show_bug.cgi?id=109485
  [fdo#110566]: https://bugs.freedesktop.org/show_bug.cgi?id=110566
  [fdo#111045]: https://bugs.freedesktop.org/show_bug.cgi?id=111045
  [fdo#111046 ]: https://bugs.freedesktop.org/show_bug.cgi?id=111046 


Participating hosts (51 -> 46)
------------------------------

  Additional (2): fi-byt-j1900 fi-snb-2600 
  Missing    (7): fi-kbl-soraka fi-hsw-4770r fi-byt-squawks fi-bsw-cyan fi-icl-y fi-byt-clapper fi-bdw-samus 


Build changes
-------------

  * Linux: CI_DRM_6446 -> Patchwork_13591

  CI_DRM_6446: 835fbe24abe47946fc514871f5cbe334d0be9854 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5092: 2a66ae6626d5583240509f84117d1345a799b75a @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_13591: dc819529058c1e30cee0b2f6928c72ae2df15cde @ git://anongit.freedesktop.org/gfx-ci/linux


== Kernel 32bit build ==

Warning: Kernel 32bit buildtest failed:
https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13591/build_32bit.log

  CALL    scripts/checksyscalls.sh
  CALL    scripts/atomic/check-atomics.sh
  CHK     include/generated/compile.h
Kernel: arch/x86/boot/bzImage is ready  (#1)
  Building modules, stage 2.
  MODPOST 112 modules
ERROR: "__udivdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: "__divdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
scripts/Makefile.modpost:91: recipe for target '__modpost' failed
make[1]: *** [__modpost] Error 1
Makefile:1287: recipe for target 'modules' failed
make: *** [modules] Error 2


== Linux commits ==

dc819529058c drm/i915/display/tgl: Bump up the plane/fb height to support 8K
90e13413f8fd drm/i915/display/tgl: Bump up the mode vertical limits to support 8K

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13591/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 1/2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K

[Souza, Jose]

On Tue, 2019-07-09 at 14:47 -0700, Manasi Navare wrote:
> On TGL+ we support 8K display resolution, hence bump up the vertical
> active limits to 4320 in intel_mode_valid()
> 
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> b/drivers/gpu/drm/i915/display/intel_display.c
> index f07081815b80..0d5c8af01f54 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
>  			   DRM_MODE_FLAG_CLKDIV2))
>  		return MODE_BAD;
>  
> -	if (INTEL_GEN(dev_priv) >= 9 ||
> -	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
> +	if (INTEL_GEN(dev_priv) >=12) {


if (INTEL_GEN(dev_priv) >= 12) {

> +		hdisplay_max = 8192;
> +		vdisplay_max = 4320;
> +		htotal_max = 8192;
> +		vtotal_max = 8192;
> +	} else if (INTEL_GEN(dev_priv) >= 9 ||
> +		   IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
>  		hdisplay_max = 8192; /* FDI max 4096 handled elsewhere
> */
>  		vdisplay_max = 4096;
>  		htotal_max = 8192;
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 1/2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K

[Manasi Navare]

On Tue, Jul 09, 2019 at 04:04:58PM -0700, Souza, Jose wrote:
> On Tue, 2019-07-09 at 14:47 -0700, Manasi Navare wrote:
> > On TGL+ we support 8K display resolution, hence bump up the vertical
> > active limits to 4320 in intel_mode_valid()
> > 
> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
> >  1 file changed, 7 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index f07081815b80..0d5c8af01f54 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
> >  			   DRM_MODE_FLAG_CLKDIV2))
> >  		return MODE_BAD;
> >  
> > -	if (INTEL_GEN(dev_priv) >= 9 ||
> > -	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
> > +	if (INTEL_GEN(dev_priv) >=12) {
> 
> 
> if (INTEL_GEN(dev_priv) >= 12) {

Yup already made this change in v2, r-b with this change?

Manasi

> 
> > +		hdisplay_max = 8192;
> > +		vdisplay_max = 4320;
> > +		htotal_max = 8192;
> > +		vtotal_max = 8192;
> > +	} else if (INTEL_GEN(dev_priv) >= 9 ||
> > +		   IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
> >  		hdisplay_max = 8192; /* FDI max 4096 handled elsewhere
> > */
> >  		vdisplay_max = 4096;
> >  		htotal_max = 8192;
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K

[Manasi Navare]

On TGL+ we support 8K display resolution, hence bump up the vertical
active limits to 4320 in intel_mode_valid()

v2:
* Checkpatch warning (Manasi)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index f07081815b80..cfceb27e4b9e 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
 			   DRM_MODE_FLAG_CLKDIV2))
 		return MODE_BAD;
 
-	if (INTEL_GEN(dev_priv) >= 9 ||
-	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
+	if (INTEL_GEN(dev_priv) >= 12) {
+		hdisplay_max = 8192;
+		vdisplay_max = 4320;
+		htotal_max = 8192;
+		vtotal_max = 8192;
+	} else if (INTEL_GEN(dev_priv) >= 9 ||
+		   IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
 		hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
 		vdisplay_max = 4096;
 		htotal_max = 8192;
-- 
2.19.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K

[Ville Syrjälä]

On Tue, Jul 09, 2019 at 05:06:13PM -0700, Manasi Navare wrote:
> On TGL+ we support 8K display resolution, hence bump up the vertical
> active limits to 4320 in intel_mode_valid()
> 
> v2:
> * Checkpatch warning (Manasi)
> 
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index f07081815b80..cfceb27e4b9e 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
>  			   DRM_MODE_FLAG_CLKDIV2))
>  		return MODE_BAD;
>  
> -	if (INTEL_GEN(dev_priv) >= 9 ||
> -	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
> +	if (INTEL_GEN(dev_priv) >= 12) {
> +		hdisplay_max = 8192;
> +		vdisplay_max = 4320;
> +		htotal_max = 8192;
> +		vtotal_max = 8192;

I wonder if we can safely bump these before we get the joiner stuff sorted.
Hmm. I guess it should be fine as the limit that is supposed to overcome
is caused by the cdclk max frequency being too low to allow a single
pipe to push enough pixels. And since we check that in .mode_valid() we
shouldn't accidentally start to advertize support for modes we can't do.

Which means these limits should actually be higher than this. 16k for
htotal+hdisplay and 8k for vtotal+vdisplay already on icl I believe.

> +	} else if (INTEL_GEN(dev_priv) >= 9 ||
> +		   IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
>  		hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
>  		vdisplay_max = 4096;
>  		htotal_max = 8192;
> -- 
> 2.19.1

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K

[Manasi Navare]

On Wed, Jul 10, 2019 at 10:15:05PM +0300, Ville Syrjälä wrote:
> On Tue, Jul 09, 2019 at 05:06:13PM -0700, Manasi Navare wrote:
> > On TGL+ we support 8K display resolution, hence bump up the vertical
> > active limits to 4320 in intel_mode_valid()
> > 
> > v2:
> > * Checkpatch warning (Manasi)
> > 
> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
> >  1 file changed, 7 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index f07081815b80..cfceb27e4b9e 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
> >  			   DRM_MODE_FLAG_CLKDIV2))
> >  		return MODE_BAD;
> >  
> > -	if (INTEL_GEN(dev_priv) >= 9 ||
> > -	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
> > +	if (INTEL_GEN(dev_priv) >= 12) {
> > +		hdisplay_max = 8192;
> > +		vdisplay_max = 4320;
> > +		htotal_max = 8192;
> > +		vtotal_max = 8192;
> 
> I wonder if we can safely bump these before we get the joiner stuff sorted.
> Hmm. I guess it should be fine as the limit that is supposed to overcome
> is caused by the cdclk max frequency being too low to allow a single
> pipe to push enough pixels. And since we check that in .mode_valid() we
> shouldn't accidentally start to advertize support for modes we can't do.

Yes the intel_dp_mode_valid() will still reject the modes until we have the support
for big joiner, so allowing these limits should be fine here.

Same for the plane size limits. Plane size limits bumping up is also
needed in case of tiled 8K display with transcdoer port sync

> 
> Which means these limits should actually be higher than this. 16k for
> htotal+hdisplay and 8k for vtotal+vdisplay already on icl I believe.

Where do we set htotal+hdisplay? And I added this for tgl, since we would be
supporting the 8K res only on tgl onwards, correct?

Manasi

> 
> > +	} else if (INTEL_GEN(dev_priv) >= 9 ||
> > +		   IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
> >  		hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
> >  		vdisplay_max = 4096;
> >  		htotal_max = 8192;
> > -- 
> > 2.19.1
> 
> -- 
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K

[Ville Syrjälä]

On Wed, Jul 10, 2019 at 12:24:15PM -0700, Manasi Navare wrote:
> On Wed, Jul 10, 2019 at 10:15:05PM +0300, Ville Syrjälä wrote:
> > On Tue, Jul 09, 2019 at 05:06:13PM -0700, Manasi Navare wrote:
> > > On TGL+ we support 8K display resolution, hence bump up the vertical
> > > active limits to 4320 in intel_mode_valid()
> > > 
> > > v2:
> > > * Checkpatch warning (Manasi)
> > > 
> > > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
> > >  1 file changed, 7 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > > index f07081815b80..cfceb27e4b9e 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
> > >  			   DRM_MODE_FLAG_CLKDIV2))
> > >  		return MODE_BAD;
> > >  
> > > -	if (INTEL_GEN(dev_priv) >= 9 ||
> > > -	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
> > > +	if (INTEL_GEN(dev_priv) >= 12) {
> > > +		hdisplay_max = 8192;
> > > +		vdisplay_max = 4320;
> > > +		htotal_max = 8192;
> > > +		vtotal_max = 8192;
> > 
> > I wonder if we can safely bump these before we get the joiner stuff sorted.
> > Hmm. I guess it should be fine as the limit that is supposed to overcome
> > is caused by the cdclk max frequency being too low to allow a single
> > pipe to push enough pixels. And since we check that in .mode_valid() we
> > shouldn't accidentally start to advertize support for modes we can't do.
> 
> Yes the intel_dp_mode_valid() will still reject the modes until we have the support
> for big joiner, so allowing these limits should be fine here.
> 
> Same for the plane size limits. Plane size limits bumping up is also
> needed in case of tiled 8K display with transcdoer port sync
> 
> > 
> > Which means these limits should actually be higher than this. 16k for
> > htotal+hdisplay and 8k for vtotal+vdisplay already on icl I believe.
> 
> Where do we set htotal+hdisplay? And I added this for tgl, since we would be
> supporting the 8K res only on tgl onwards, correct?

We can do 8k on earlier platforms too, assuming the clock is low enough.
Also icl already can do the joining stuff no?

Anwyays these number are just the straight up transcoder max timings
from the spec, and that's what I think they should stay. If we need to
impose some other arbitrary limits for other reasons we should do that
separately.

Hmm. I guess planes is the other thing that's a problem for 8k and such.
The documented max width is too small for any single plane to cover
such a big pipe. We should perhaps be validating modes against the plane
limits as well...

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.BAT: success for series starting with [v2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K (rev2)

[Patchwork]

== Series Details ==

Series: series starting with [v2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K (rev2)
URL   : https://patchwork.freedesktop.org/series/63458/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_6446 -> Patchwork_13593
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/

Known issues
------------

  Here are the changes found in Patchwork_13593 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@gem_flink_basic@bad-open:
    - fi-icl-u3:          [PASS][1] -> [DMESG-WARN][2] ([fdo#107724])
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/fi-icl-u3/igt@gem_flink_basic@bad-open.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/fi-icl-u3/igt@gem_flink_basic@bad-open.html

  * igt@prime_self_import@basic-with_one_bo:
    - fi-icl-dsi:         [PASS][3] -> [INCOMPLETE][4] ([fdo#107713])
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/fi-icl-dsi/igt@prime_self_import@basic-with_one_bo.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/fi-icl-dsi/igt@prime_self_import@basic-with_one_bo.html

  
#### Possible fixes ####

  * {igt@gem_ctx_switch@legacy-render}:
    - fi-cml-u:           [INCOMPLETE][5] ([fdo#110566]) -> [PASS][6]
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/fi-cml-u/igt@gem_ctx_switch@legacy-render.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/fi-cml-u/igt@gem_ctx_switch@legacy-render.html

  * igt@kms_chamelium@hdmi-hpd-fast:
    - fi-kbl-7500u:       [FAIL][7] ([fdo#109485]) -> [PASS][8]
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/fi-kbl-7500u/igt@kms_chamelium@hdmi-hpd-fast.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/fi-kbl-7500u/igt@kms_chamelium@hdmi-hpd-fast.html

  
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
  [fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
  [fdo#109485]: https://bugs.freedesktop.org/show_bug.cgi?id=109485
  [fdo#110566]: https://bugs.freedesktop.org/show_bug.cgi?id=110566
  [fdo#111046 ]: https://bugs.freedesktop.org/show_bug.cgi?id=111046 


Participating hosts (51 -> 46)
------------------------------

  Additional (2): fi-byt-j1900 fi-snb-2600 
  Missing    (7): fi-kbl-soraka fi-byt-squawks fi-bsw-cyan fi-icl-y fi-icl-guc fi-byt-clapper fi-bdw-samus 


Build changes
-------------

  * Linux: CI_DRM_6446 -> Patchwork_13593

  CI_DRM_6446: 835fbe24abe47946fc514871f5cbe334d0be9854 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5092: 2a66ae6626d5583240509f84117d1345a799b75a @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_13593: a537b92522385cda1cfb1400f1c9d29f11cb3b6b @ git://anongit.freedesktop.org/gfx-ci/linux


== Kernel 32bit build ==

Warning: Kernel 32bit buildtest failed:
https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/build_32bit.log

  CALL    scripts/checksyscalls.sh
  CALL    scripts/atomic/check-atomics.sh
  CHK     include/generated/compile.h
Kernel: arch/x86/boot/bzImage is ready  (#1)
  Building modules, stage 2.
  MODPOST 112 modules
ERROR: "__udivdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: "__divdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
scripts/Makefile.modpost:91: recipe for target '__modpost' failed
make[1]: *** [__modpost] Error 1
Makefile:1287: recipe for target 'modules' failed
make: *** [modules] Error 2


== Linux commits ==

a537b9252238 drm/i915/display/tgl: Bump up the plane/fb height to support 8K
ed957eb65698 drm/i915/display/tgl: Bump up the mode vertical limits to support 8K

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.IGT: success for series starting with [v2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K (rev2)

[Patchwork]

== Series Details ==

Series: series starting with [v2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K (rev2)
URL   : https://patchwork.freedesktop.org/series/63458/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_6446_full -> Patchwork_13593_full
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  

Known issues
------------

  Here are the changes found in Patchwork_13593_full that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@i915_suspend@fence-restore-tiled2untiled:
    - shard-apl:          [PASS][1] -> [DMESG-WARN][2] ([fdo#108566]) +4 similar issues
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-apl7/igt@i915_suspend@fence-restore-tiled2untiled.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-apl7/igt@i915_suspend@fence-restore-tiled2untiled.html

  * igt@kms_busy@basic-modeset-a:
    - shard-iclb:         [PASS][3] -> [INCOMPLETE][4] ([fdo#107713])
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-iclb6/igt@kms_busy@basic-modeset-a.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-iclb1/igt@kms_busy@basic-modeset-a.html

  * igt@kms_color@pipe-b-ctm-red-to-blue:
    - shard-skl:          [PASS][5] -> [FAIL][6] ([fdo#107201])
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-skl1/igt@kms_color@pipe-b-ctm-red-to-blue.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-skl5/igt@kms_color@pipe-b-ctm-red-to-blue.html

  * igt@kms_cursor_legacy@short-flip-before-cursor-toggle:
    - shard-snb:          [PASS][7] -> [SKIP][8] ([fdo#109271])
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-snb5/igt@kms_cursor_legacy@short-flip-before-cursor-toggle.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-snb2/igt@kms_cursor_legacy@short-flip-before-cursor-toggle.html

  * igt@kms_flip@flip-vs-expired-vblank:
    - shard-skl:          [PASS][9] -> [FAIL][10] ([fdo#105363]) +1 similar issue
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-skl6/igt@kms_flip@flip-vs-expired-vblank.html
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-skl8/igt@kms_flip@flip-vs-expired-vblank.html

  * igt@kms_flip_tiling@flip-changes-tiling-yf:
    - shard-skl:          [PASS][11] -> [FAIL][12] ([fdo#108228] / [fdo#108303])
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-skl3/igt@kms_flip_tiling@flip-changes-tiling-yf.html
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-skl3/igt@kms_flip_tiling@flip-changes-tiling-yf.html

  * igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-cpu:
    - shard-iclb:         [PASS][13] -> [FAIL][14] ([fdo#103167]) +2 similar issues
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-iclb3/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-cpu.html
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-iclb2/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-cpu.html

  * igt@kms_plane_alpha_blend@pipe-b-constant-alpha-min:
    - shard-skl:          [PASS][15] -> [FAIL][16] ([fdo#108145])
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-skl1/igt@kms_plane_alpha_blend@pipe-b-constant-alpha-min.html
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-skl5/igt@kms_plane_alpha_blend@pipe-b-constant-alpha-min.html

  * igt@kms_psr@psr2_suspend:
    - shard-iclb:         [PASS][17] -> [SKIP][18] ([fdo#109441]) +1 similar issue
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-iclb2/igt@kms_psr@psr2_suspend.html
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-iclb3/igt@kms_psr@psr2_suspend.html

  * igt@kms_setmode@basic:
    - shard-kbl:          [PASS][19] -> [FAIL][20] ([fdo#99912])
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-kbl1/igt@kms_setmode@basic.html
   [20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-kbl6/igt@kms_setmode@basic.html

  
#### Possible fixes ####

  * igt@i915_pm_rpm@debugfs-read:
    - shard-skl:          [INCOMPLETE][21] ([fdo#107807]) -> [PASS][22]
   [21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-skl5/igt@i915_pm_rpm@debugfs-read.html
   [22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-skl3/igt@i915_pm_rpm@debugfs-read.html

  * igt@kms_cursor_crc@pipe-a-cursor-128x42-random:
    - shard-apl:          [INCOMPLETE][23] ([fdo#103927]) -> [PASS][24]
   [23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-apl7/igt@kms_cursor_crc@pipe-a-cursor-128x42-random.html
   [24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-apl5/igt@kms_cursor_crc@pipe-a-cursor-128x42-random.html

  * igt@kms_flip@flip-vs-suspend-interruptible:
    - shard-apl:          [DMESG-WARN][25] ([fdo#108566]) -> [PASS][26] +4 similar issues
   [25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-apl2/igt@kms_flip@flip-vs-suspend-interruptible.html
   [26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-apl3/igt@kms_flip@flip-vs-suspend-interruptible.html

  * igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-pwrite:
    - shard-iclb:         [FAIL][27] ([fdo#103167]) -> [PASS][28] +3 similar issues
   [27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-iclb8/igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-pwrite.html
   [28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-iclb6/igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-pwrite.html

  * igt@kms_psr@no_drrs:
    - shard-iclb:         [FAIL][29] ([fdo#108341]) -> [PASS][30]
   [29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-iclb1/igt@kms_psr@no_drrs.html
   [30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-iclb3/igt@kms_psr@no_drrs.html

  * igt@kms_psr@psr2_sprite_mmap_gtt:
    - shard-iclb:         [SKIP][31] ([fdo#109441]) -> [PASS][32] +4 similar issues
   [31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-iclb3/igt@kms_psr@psr2_sprite_mmap_gtt.html
   [32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-iclb2/igt@kms_psr@psr2_sprite_mmap_gtt.html

  * igt@kms_setmode@basic:
    - shard-apl:          [FAIL][33] ([fdo#99912]) -> [PASS][34]
   [33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-apl8/igt@kms_setmode@basic.html
   [34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-apl5/igt@kms_setmode@basic.html

  
  [fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
  [fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
  [fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
  [fdo#107201]: https://bugs.freedesktop.org/show_bug.cgi?id=107201
  [fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
  [fdo#107807]: https://bugs.freedesktop.org/show_bug.cgi?id=107807
  [fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
  [fdo#108228]: https://bugs.freedesktop.org/show_bug.cgi?id=108228
  [fdo#108303]: https://bugs.freedesktop.org/show_bug.cgi?id=108303
  [fdo#108341]: https://bugs.freedesktop.org/show_bug.cgi?id=108341
  [fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
  [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
  [fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
  [fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912


Participating hosts (10 -> 10)
------------------------------

  No changes in participating hosts


Build changes
-------------

  * Linux: CI_DRM_6446 -> Patchwork_13593

  CI_DRM_6446: 835fbe24abe47946fc514871f5cbe334d0be9854 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5092: 2a66ae6626d5583240509f84117d1345a799b75a @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_13593: a537b92522385cda1cfb1400f1c9d29f11cb3b6b @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx