From: Johan Hovold <johan@kernel.org>
To: Rogan Dawes <rogan@dawes.za.net>
Cc: Johan Hovold <johan@kernel.org>,
linux-usb@vger.kernel.org, Lars Melin <larsm17@gmail.com>,
Dan Williams <dcbw@redhat.com>
Subject: Re: [PATCH] USB: serial: option: add D-Link DWM-222 device ID [version 2]
Date: Tue, 16 Jul 2019 13:17:11 +0200 [thread overview]
Message-ID: <20190716111711.GD3522@localhost> (raw)
In-Reply-To: <CAOYdKdiEUsk9O=ytis=u2yD-69LoKNSE8=ivwer8K3sMNCd8Dw@mail.gmail.com>
On Tue, Jul 16, 2019 at 12:55:17PM +0200, Rogan Dawes wrote:
> After binding the Option driver, lsusb -v -d 2001:7e3d
>
> Bus 001 Device 062: ID 2001:7e3d D-Link Corp. Mobile Connect
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.01
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x2001 D-Link Corp.
> idProduct 0x7e3d
> bcdDevice 2.28
> iManufacturer 1 Mobile Connect
> iProduct 2 Mobile Connect
> iSerial 3 0123456789ABCDEF
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 0x00e8
> bNumInterfaces 6
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 500mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 EP 1 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> ** UNRECOGNIZED: 05 24 00 10 01
> ** UNRECOGNIZED: 05 24 01 00 00
> ** UNRECOGNIZED: 04 24 02 02
> ** UNRECOGNIZED: 05 24 06 00 00
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x000a 1x 10 bytes
> bInterval 9
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 EP 2 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 2
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> ** UNRECOGNIZED: 05 24 00 10 01
> ** UNRECOGNIZED: 05 24 01 00 00
> ** UNRECOGNIZED: 04 24 02 02
> ** UNRECOGNIZED: 05 24 06 00 00
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x85 EP 5 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x000a 1x 10 bytes
> bInterval 9
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 3
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> ** UNRECOGNIZED: 05 24 00 10 01
> ** UNRECOGNIZED: 05 24 01 00 00
> ** UNRECOGNIZED: 04 24 02 02
> ** UNRECOGNIZED: 05 24 06 00 00
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x87 EP 7 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x000a 1x 10 bytes
> bInterval 9
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x86 EP 6 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x04 EP 4 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 4
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x89 EP 9 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0008 1x 8 bytes
> bInterval 9
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x88 EP 8 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x05 EP 5 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 5
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 8 Mass Storage
> bInterfaceSubClass 6 SCSI
> bInterfaceProtocol 80 Bulk-Only
> iInterface 4 Mass Storage
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x8a EP 10 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x06 EP 6 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 1
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 0x000c
> bNumDeviceCaps 1
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> HIRD Link Power Management (LPM) Supported
> can't get debug descriptor: Resource temporarily unavailable
> Device Status: 0x0000
> (Bus Powered)
Ok, thanks. Do you have any idea what all those vendor interface are
for? Some of the other D-Link entries blacklist a speech and debug port
for example.
We can always do that later if we need to, but perhaps you or someone
already know (also adding Lars and Dan on CC).
Johan
next prev parent reply other threads:[~2019-07-16 11:17 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-11 9:40 [PATCH] USB: serial: option: add D-Link DWM-222 device ID Rogan Dawes
2019-07-11 10:34 ` [PATCH] USB: serial: option: add D-Link DWM-222 device ID [version 2] Rogan Dawes
2019-07-16 9:11 ` Johan Hovold
2019-07-16 10:55 ` Rogan Dawes
2019-07-16 11:17 ` Johan Hovold [this message]
2019-07-16 14:34 ` Lars Melin
2019-07-16 18:05 ` Johan Hovold
2019-07-16 18:40 ` Rogan Dawes
2019-07-16 18:49 ` Rogan Dawes
2019-07-16 19:02 ` [PATCH v4] USB: serial: option: add D-Link DWM-222 device ID Rogan Dawes
2019-07-16 19:12 ` [PATCH v5] USB: serial/qmi_wwan: " Rogan Dawes
2019-07-16 19:37 ` Greg KH
2019-07-16 19:44 ` Johan Hovold
2019-07-17 1:43 ` Dan Williams
2019-07-17 6:19 ` Johan Hovold
2019-07-17 9:11 ` [PATCH v6] USB: serial: option: " Rogan Dawes
2019-07-17 9:14 ` [PATCH] usb: qmi_wwan: add D-Link DWM-222 A2 " Rogan Dawes
2019-07-18 23:34 ` David Miller
2019-07-17 9:20 ` [PATCH v6] USB: serial: option: add D-Link DWM-222 " Johan Hovold
2019-07-17 9:37 ` Rogan Dawes
2019-08-05 11:36 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190716111711.GD3522@localhost \
--to=johan@kernel.org \
--cc=dcbw@redhat.com \
--cc=larsm17@gmail.com \
--cc=linux-usb@vger.kernel.org \
--cc=rogan@dawes.za.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.