All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org, tiwai@suse.de, broonie@kernel.org,
	vkoul@kernel.org, gregkh@linuxfoundation.org, jank@cadence.com,
	srinivas.kandagatla@linaro.org, slawomir.blauciak@intel.com,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	Sanyog Kale <sanyog.r.kale@intel.com>
Subject: [RFC PATCH 27/40] soundwire: Add Intel resource management algorithm
Date: Thu, 25 Jul 2019 18:40:19 -0500	[thread overview]
Message-ID: <20190725234032.21152-28-pierre-louis.bossart@linux.intel.com> (raw)
In-Reply-To: <20190725234032.21152-1-pierre-louis.bossart@linux.intel.com>

This algorithm computes bus parameters like clock frequency, frame
shape and port transport parameters based on active stream(s) running
on the bus.

This implementation is optimal for Intel platforms. Developers can
also implement their own .compute_params() callback for specific
resource management algorithm.

Credits: this patch is based on an earlier internal contribution by
Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. All hard-coded
values were removed from the initial contribution to use BIOS
information instead.

FIXME: remove checkpatch report
WARNING: Reusing the krealloc arg is almost always a bug
+			group->rates = krealloc(group->rates,

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 drivers/soundwire/Makefile                  |   2 +-
 drivers/soundwire/algo_dynamic_allocation.c | 403 ++++++++++++++++++++
 drivers/soundwire/bus.c                     |   3 +
 drivers/soundwire/bus.h                     |  46 ++-
 drivers/soundwire/stream.c                  |  20 +
 include/linux/soundwire/sdw.h               |   5 +
 6 files changed, 476 insertions(+), 3 deletions(-)
 create mode 100644 drivers/soundwire/algo_dynamic_allocation.c

diff --git a/drivers/soundwire/Makefile b/drivers/soundwire/Makefile
index 88990cac48a7..f59a9d4a28fd 100644
--- a/drivers/soundwire/Makefile
+++ b/drivers/soundwire/Makefile
@@ -5,7 +5,7 @@
 
 #Bus Objs
 soundwire-bus-objs := bus_type.o bus.o slave.o mipi_disco.o stream.o \
-			debugfs.o
+			debugfs.o algo_dynamic_allocation.o
 
 obj-$(CONFIG_SOUNDWIRE_BUS) += soundwire-bus.o
 
diff --git a/drivers/soundwire/algo_dynamic_allocation.c b/drivers/soundwire/algo_dynamic_allocation.c
new file mode 100644
index 000000000000..89edb39162b8
--- /dev/null
+++ b/drivers/soundwire/algo_dynamic_allocation.c
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+// Copyright(c) 2015-18 Intel Corporation.
+
+/*
+ * Bandwidth management algorithm based on 2^n gears
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/soundwire/sdw.h>
+#include "bus.h"
+
+#define SDW_STRM_RATE_GROUPING		1
+
+struct sdw_group_params {
+	unsigned int rate;
+	int full_bw;
+	int payload_bw;
+	int hwidth;
+};
+
+struct sdw_group {
+	unsigned int count;
+	unsigned int max_size;
+	unsigned int *rates;
+};
+
+struct sdw_transport_data {
+	int hstart;
+	int hstop;
+	int block_offset;
+	int sub_block_offset;
+};
+
+static void sdw_compute_slave_ports(struct sdw_master_runtime *m_rt,
+				    struct sdw_transport_data *t_data)
+{
+	struct sdw_slave_runtime *s_rt = NULL;
+	struct sdw_port_runtime *p_rt;
+	int port_bo, sample_int;
+	unsigned int rate, bps, ch = 0;
+
+	port_bo = t_data->block_offset;
+
+	list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
+		rate = m_rt->stream->params.rate;
+		bps = m_rt->stream->params.bps;
+		sample_int = (m_rt->bus->params.curr_dr_freq / rate);
+
+		list_for_each_entry(p_rt, &s_rt->port_list, port_node) {
+			ch = sdw_ch_mask_to_ch(p_rt->ch_mask);
+
+			sdw_fill_xport_params(&p_rt->transport_params,
+					      p_rt->num, true,
+					      SDW_BLK_GRP_CNT_1,
+					      sample_int, port_bo, port_bo >> 8,
+					      t_data->hstart,
+					      t_data->hstop,
+					      (SDW_BLK_GRP_CNT_1 * ch), 0x0);
+
+			sdw_fill_port_params(&p_rt->port_params,
+					     p_rt->num, bps,
+					     SDW_PORT_FLOW_MODE_ISOCH,
+					     SDW_PORT_DATA_MODE_NORMAL);
+
+			port_bo += bps * ch;
+		}
+	}
+}
+
+static void sdw_compute_master_ports(struct sdw_master_runtime *m_rt,
+				     struct sdw_group_params *params,
+				     int port_bo, int hstop)
+{
+	struct sdw_transport_data t_data = {0};
+	struct sdw_port_runtime *p_rt;
+	struct sdw_bus *bus = m_rt->bus;
+	int sample_int, hstart = 0;
+	unsigned int rate, bps, ch, no_ch;
+
+	rate = m_rt->stream->params.rate;
+	bps = m_rt->stream->params.bps;
+	ch = m_rt->ch_count;
+	sample_int = (bus->params.curr_dr_freq / rate);
+
+	if (rate != params->rate)
+		return;
+
+	t_data.hstop = hstop;
+	hstart = hstop - params->hwidth + 1;
+	t_data.hstart = hstart;
+
+	list_for_each_entry(p_rt, &m_rt->port_list, port_node) {
+		no_ch = sdw_ch_mask_to_ch(p_rt->ch_mask);
+
+		sdw_fill_xport_params(&p_rt->transport_params, p_rt->num,
+				      true, SDW_BLK_GRP_CNT_1, sample_int,
+				      port_bo, port_bo >> 8, hstart, hstop,
+				      (SDW_BLK_GRP_CNT_1 * no_ch), 0x0);
+
+		sdw_fill_port_params(&p_rt->port_params,
+				     p_rt->num, bps,
+				     SDW_PORT_FLOW_MODE_ISOCH,
+				     SDW_PORT_DATA_MODE_NORMAL);
+
+		/* Check for first entry */
+		if (!(p_rt == list_first_entry(&m_rt->port_list,
+					       struct sdw_port_runtime,
+					       port_node))) {
+			port_bo += bps * ch;
+			continue;
+		}
+
+		t_data.hstart = hstart;
+		t_data.hstop = hstop;
+		t_data.block_offset = port_bo;
+		t_data.sub_block_offset = 0;
+		port_bo += bps * ch;
+	}
+
+	sdw_compute_slave_ports(m_rt, &t_data);
+}
+
+static void _sdw_compute_port_params(struct sdw_bus *bus,
+				     struct sdw_group_params *params, int count)
+{
+	struct sdw_master_runtime *m_rt = NULL;
+	int hstop = bus->params.col - 1;
+	int block_offset, port_bo, i;
+
+	/* Run loop for all groups to compute transport parameters */
+	for (i = 0; i < count; i++) {
+		port_bo = 1;
+		block_offset = 1;
+
+		list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) {
+			sdw_compute_master_ports(m_rt, &params[i],
+						 port_bo, hstop);
+
+			block_offset += m_rt->ch_count *
+					m_rt->stream->params.bps;
+			port_bo = block_offset;
+		}
+
+		hstop = hstop - params[i].hwidth;
+	}
+}
+
+static int sdw_compute_group_params(struct sdw_bus *bus,
+				    struct sdw_group_params *params,
+				    int *rates, int count)
+{
+	struct sdw_master_runtime *m_rt = NULL;
+	int sel_col = bus->params.col;
+	unsigned int rate, bps, ch;
+	int i, column_needed = 0;
+
+	/* Calculate bandwidth per group */
+	for (i = 0; i < count; i++) {
+		params[i].rate = rates[i];
+		params[i].full_bw = bus->params.curr_dr_freq / params[i].rate;
+	}
+
+	list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) {
+		rate = m_rt->stream->params.rate;
+		bps = m_rt->stream->params.bps;
+		ch = m_rt->ch_count;
+
+		for (i = 0; i < count; i++) {
+			if (rate == params[i].rate)
+				params[i].payload_bw += bps * ch;
+		}
+	}
+
+	for (i = 0; i < count; i++) {
+		params[i].hwidth = (sel_col *
+			params[i].payload_bw + params[i].full_bw - 1) /
+			params[i].full_bw;
+
+		column_needed += params[i].hwidth;
+	}
+
+	if (column_needed > sel_col - 1)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int sdw_add_element_group_count(struct sdw_group *group,
+				       unsigned int rate)
+{
+	int num = group->count;
+	int i;
+
+	for (i = 0; i <= num; i++) {
+		if (rate == group->rates[i])
+			break;
+
+		if (i != num)
+			continue;
+
+		if (group->count >= group->max_size) {
+			group->max_size += 1;
+			group->rates = krealloc(group->rates,
+						(sizeof(int) * group->max_size),
+						GFP_KERNEL);
+			if (!group->rates)
+				return -ENOMEM;
+		}
+
+		group->rates[group->count++] = rate;
+	}
+
+	return 0;
+}
+
+static int sdw_get_group_count(struct sdw_bus *bus,
+			       struct sdw_group *group)
+{
+	struct sdw_master_runtime *m_rt;
+	unsigned int rate;
+	int ret = 0;
+
+	group->count = 0;
+	group->max_size = SDW_STRM_RATE_GROUPING;
+	group->rates = kcalloc(group->max_size, sizeof(int), GFP_KERNEL);
+	if (!group->rates)
+		return -ENOMEM;
+
+	list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) {
+		rate = m_rt->stream->params.rate;
+		if (m_rt == list_first_entry(&bus->m_rt_list,
+					     struct sdw_master_runtime,
+					     bus_node)) {
+			group->rates[group->count++] = rate;
+
+		} else {
+			ret = sdw_add_element_group_count(group, rate);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	return ret;
+}
+
+/**
+ * sdw_compute_port_params: Compute transport and port parameters
+ *
+ * @bus: SDW Bus instance
+ */
+static int sdw_compute_port_params(struct sdw_bus *bus)
+{
+	struct sdw_group_params *params = NULL;
+	struct sdw_group group;
+	int ret;
+
+	ret = sdw_get_group_count(bus, &group);
+	if (ret < 0)
+		goto out;
+
+	if (group.count == 0)
+		goto out;
+
+	params = kcalloc(group.count, sizeof(*params), GFP_KERNEL);
+	if (!params) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* Compute transport parameters for grouped streams */
+	ret = sdw_compute_group_params(bus, params,
+				       &group.rates[0], group.count);
+	if (ret < 0)
+		goto out;
+
+	_sdw_compute_port_params(bus, params, group.count);
+
+out:
+	kfree(params);
+	kfree(group.rates);
+
+	return ret;
+}
+
+static int sdw_select_row_col(struct sdw_bus *bus, int clk_freq)
+{
+	struct sdw_master_prop *prop = &bus->prop;
+	int frame_int, frame_freq;
+	int r, c;
+
+	for (c = 0; c < SDW_FRAME_COLS; c++) {
+		for (r = 0; r < SDW_FRAME_ROWS; r++) {
+			if (sdw_rows[r] != prop->default_row ||
+			    sdw_cols[c] != prop->default_col)
+				continue;
+
+			frame_int = sdw_rows[r] * sdw_cols[c];
+			frame_freq = clk_freq / frame_int;
+
+			if ((clk_freq - (frame_freq * SDW_FRAME_CTRL_BITS)) <
+			    bus->params.bandwidth)
+				continue;
+
+			bus->params.row = sdw_rows[r];
+			bus->params.col = sdw_cols[c];
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * sdw_compute_bus_params: Compute bus parameters
+ *
+ * @bus: SDW Bus instance
+ */
+static int sdw_compute_bus_params(struct sdw_bus *bus)
+{
+	unsigned int max_dr_freq, curr_dr_freq = 0;
+	struct sdw_master_prop *mstr_prop = NULL;
+	int i, clk_values, ret;
+	bool is_gear = false;
+	u32 *clk_buf;
+
+	mstr_prop = &bus->prop;
+	if (!mstr_prop)
+		return -EINVAL;
+
+	if (mstr_prop->num_clk_gears) {
+		clk_values = mstr_prop->num_clk_gears;
+		clk_buf = mstr_prop->clk_gears;
+		is_gear = true;
+	} else if (mstr_prop->num_clk_freq) {
+		clk_values = mstr_prop->num_clk_freq;
+		clk_buf = mstr_prop->clk_freq;
+	} else {
+		clk_values = 1;
+		clk_buf = NULL;
+	}
+
+	max_dr_freq = mstr_prop->max_clk_freq * SDW_DOUBLE_RATE_FACTOR;
+
+	for (i = 0; i < clk_values; i++) {
+		if (!clk_buf)
+			curr_dr_freq = max_dr_freq;
+		else
+			curr_dr_freq = (is_gear) ?
+				(max_dr_freq >>  clk_buf[i]) :
+				clk_buf[i] * SDW_DOUBLE_RATE_FACTOR;
+
+		if (curr_dr_freq <= bus->params.bandwidth)
+			continue;
+
+		break;
+
+		/*
+		 * TODO: Check all the Slave(s) port(s) audio modes and find
+		 * whether given clock rate is supported with glitchless
+		 * transition.
+		 */
+	}
+
+	if (i == clk_values)
+		return -EINVAL;
+
+	ret = sdw_select_row_col(bus, curr_dr_freq);
+	if (ret < 0)
+		return -EINVAL;
+
+	bus->params.curr_dr_freq = curr_dr_freq;
+	return 0;
+}
+
+/**
+ * sdw_compute_params: Compute bus, transport and port parameters
+ *
+ * @bus: SDW Bus instance
+ */
+int sdw_compute_params(struct sdw_bus *bus)
+{
+	int ret;
+
+	/* Computes clock frequency, frame shape and frame frequency */
+	ret = sdw_compute_bus_params(bus);
+	if (ret < 0) {
+		dev_err(bus->dev, "Compute bus params failed: %d", ret);
+		return ret;
+	}
+
+	/* Compute transport and port params */
+	ret = sdw_compute_port_params(bus);
+	if (ret < 0) {
+		dev_err(bus->dev, "Compute transport params failed: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(sdw_compute_params);
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index 2354675ef104..76a180578712 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -51,6 +51,9 @@ int sdw_add_bus_master(struct sdw_bus *bus)
 
 	bus->debugfs = sdw_bus_debugfs_init(bus);
 
+	if (!bus->compute_params)
+		bus->compute_params = &sdw_compute_params;
+
 	/*
 	 * Device numbers in SoundWire are 0 through 15. Enumeration device
 	 * number (0), Broadcast device number (15), Group numbers (12 and
diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h
index c57c9c23f6ca..fdb7ce034fdf 100644
--- a/drivers/soundwire/bus.h
+++ b/drivers/soundwire/bus.h
@@ -72,6 +72,7 @@ struct sdw_msg {
 };
 
 #define SDW_DOUBLE_RATE_FACTOR		2
+#define SDW_STRM_RATE_GROUPING		1
 
 extern int sdw_rows[SDW_FRAME_ROWS];
 extern int sdw_cols[SDW_FRAME_COLS];
@@ -157,9 +158,50 @@ int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg,
 int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave,
 		 u32 addr, size_t count, u16 dev_num, u8 flags, u8 *buf);
 
+/* Retrieve and return channel count from channel mask */
+static inline int sdw_ch_mask_to_ch(int ch_mask)
+{
+	int c = 0;
+
+	for (c = 0; ch_mask; ch_mask >>= 1)
+		c += ch_mask & 1;
+
+	return c;
+}
+
+/* Fill transport parameter data structure */
+static inline void sdw_fill_xport_params(struct sdw_transport_params *params,
+					 int port_num, bool grp_ctrl_valid,
+					 int grp_ctrl, int sample_int,
+					 int off1, int off2,
+					 int hstart, int hstop,
+					 int pack_mode, int lane_ctrl)
+{
+	params->port_num = port_num;
+	params->blk_grp_ctrl_valid = grp_ctrl_valid;
+	params->blk_grp_ctrl = grp_ctrl;
+	params->sample_interval = sample_int;
+	params->offset1 = off1;
+	params->offset2 = off2;
+	params->hstart = hstart;
+	params->hstop = hstop;
+	params->blk_pkg_mode = pack_mode;
+	params->lane_ctrl = lane_ctrl;
+}
+
+/* Fill port parameter data structure */
+static inline void sdw_fill_port_params(struct sdw_port_params *params,
+					int port_num, int bps,
+					int flow_mode, int data_mode)
+{
+	params->num = port_num;
+	params->bps = bps;
+	params->flow_mode = flow_mode;
+	params->data_mode = data_mode;
+}
+
 /* Read-Modify-Write Slave register */
-static inline int
-sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val)
+static inline int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val)
 {
 	int tmp;
 
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index 75b9ad1fb1a6..add7c121d084 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -1485,6 +1485,16 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
 		bus->params.bandwidth += m_rt->stream->params.rate *
 			m_rt->ch_count * m_rt->stream->params.bps;
 
+		/* Compute params */
+		if (bus->compute_params) {
+			ret = bus->compute_params(bus);
+			if (ret < 0) {
+				dev_err(bus->dev,
+					"Compute params failed: %d", ret);
+				return ret;
+			}
+		}
+
 		/* Program params */
 		ret = sdw_program_params(bus);
 		if (ret < 0) {
@@ -1704,6 +1714,16 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
 		bus->params.bandwidth -= m_rt->stream->params.rate *
 			m_rt->ch_count * m_rt->stream->params.bps;
 
+		/* Compute params */
+		if (bus->compute_params) {
+			ret = bus->compute_params(bus);
+			if (ret < 0) {
+				dev_err(bus->dev,
+					"Compute params failed: %d", ret);
+				return ret;
+			}
+		}
+
 		/* Program params */
 		ret = sdw_program_params(bus);
 		if (ret < 0) {
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index b6acc436ac80..c7dfc824be80 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -730,6 +730,7 @@ struct sdw_master_ops {
  * Bit set implies used number, bit clear implies unused number.
  * @bus_lock: bus lock
  * @msg_lock: message lock
+ * @compute_params: points to Bus resource management implementation
  * @ops: Master callback ops
  * @port_ops: Master port callback ops
  * @params: Current bus parameters
@@ -752,6 +753,7 @@ struct sdw_bus {
 	DECLARE_BITMAP(assigned, SDW_MAX_DEVICES);
 	struct mutex bus_lock;
 	struct mutex msg_lock;
+	int (*compute_params)(struct sdw_bus *bus);
 	const struct sdw_master_ops *ops;
 	const struct sdw_master_port_ops *port_ops;
 	struct sdw_bus_params params;
@@ -852,6 +854,9 @@ struct sdw_stream_runtime {
 
 struct sdw_stream_runtime *sdw_alloc_stream(char *stream_name);
 void sdw_release_stream(struct sdw_stream_runtime *stream);
+
+int sdw_compute_params(struct sdw_bus *bus);
+
 int sdw_stream_add_master(struct sdw_bus *bus,
 		struct sdw_stream_config *stream_config,
 		struct sdw_port_config *port_config,
-- 
2.20.1


  parent reply	other threads:[~2019-07-25 23:41 UTC|newest]

Thread overview: 189+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-25 23:39 [RFC PATCH 00/40] soundwire: updates for 5.4 Pierre-Louis Bossart
2019-07-25 23:39 ` [RFC PATCH 01/40] soundwire: add debugfs support Pierre-Louis Bossart
2019-07-25 22:15   ` [alsa-devel] " Guennadi Liakhovetski
2019-07-26 13:43     ` Pierre-Louis Bossart
2019-07-26 13:43       ` Pierre-Louis Bossart
2019-07-26  9:22   ` Cezary Rojewski
2019-07-26 13:57     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-26 14:04   ` Greg KH
2019-07-26 15:29     ` Pierre-Louis Bossart
2019-07-25 23:39 ` [RFC PATCH 02/40] soundwire: cadence_master: add debugfs register dump Pierre-Louis Bossart
2019-07-25 23:39   ` Pierre-Louis Bossart
2019-07-26 14:09   ` Greg KH
2019-07-26 15:32     ` Pierre-Louis Bossart
2019-08-05  7:55   ` Sanyog Kale
2019-08-05 15:20     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-25 23:39 ` [RFC PATCH 03/40] soundwire: cadence_master: align debugfs to 8 digits Pierre-Louis Bossart
2019-07-26  9:38   ` Cezary Rojewski
2019-07-26 13:58     ` [alsa-devel] " Pierre-Louis Bossart
2019-08-02 11:50   ` Vinod Koul
2019-07-25 23:39 ` [RFC PATCH 04/40] soundwire: intel: add debugfs register dump Pierre-Louis Bossart
2019-07-26  9:35   ` Cezary Rojewski
2019-07-26 14:00     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-26 14:11       ` Greg KH
2019-07-26 14:06   ` Greg KH
2019-07-26 14:09     ` Greg KH
2019-07-26 15:34     ` Pierre-Louis Bossart
2019-07-25 23:39 ` [RFC PATCH 05/40] soundwire: intel: move interrupt enable after interrupt handler registration Pierre-Louis Bossart
2019-08-02 11:53   ` Vinod Koul
2019-08-02 15:08     ` Pierre-Louis Bossart
2019-07-25 23:39 ` [RFC PATCH 06/40] soundwire: intel: prevent possible dereference in hw_params Pierre-Louis Bossart
2019-07-26  9:45   ` Cezary Rojewski
2019-07-26 14:02     ` [alsa-devel] " Pierre-Louis Bossart
2019-08-02 11:55   ` Vinod Koul
2019-08-02 15:16     ` [alsa-devel] " Pierre-Louis Bossart
2019-08-02 15:57       ` Vinod Koul
2019-08-02 16:52         ` Pierre-Louis Bossart
2019-08-02 17:37           ` Vinod Koul
2019-07-25 23:39 ` [RFC PATCH 07/40] soundwire: intel: fix channel number reported by hardware Pierre-Louis Bossart
2019-08-02 11:57   ` Vinod Koul
2019-08-02 15:18     ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 08/40] soundwire: intel: remove BIOS work-arounds Pierre-Louis Bossart
2019-08-02 11:58   ` Vinod Koul
2019-07-25 23:40 ` [RFC PATCH 09/40] soundwire: cadence_master: fix usage of CONFIG_UPDATE Pierre-Louis Bossart
2019-07-25 22:23   ` [alsa-devel] " Guennadi Liakhovetski
2019-07-25 22:23     ` Guennadi Liakhovetski
2019-07-26 14:05     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-26  2:11   ` Bard liao
2019-07-26 13:33     ` Pierre-Louis Bossart
2019-07-26  9:53   ` Cezary Rojewski
2019-07-26  9:54     ` Cezary Rojewski
2019-08-02 12:03   ` Vinod Koul
2019-08-02 15:18     ` Pierre-Louis Bossart
2019-08-05  8:51   ` Sanyog Kale
2019-07-25 23:40 ` [RFC PATCH 10/40] soundwire: cadence_master: remove useless wrapper Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 11/40] soundwire: cadence_master: simplify bus clash interrupt clear Pierre-Louis Bossart
2019-08-02 12:07   ` Vinod Koul
2019-07-25 23:40 ` [RFC PATCH 12/40] soundwire: cadence_master: revisit interrupt settings Pierre-Louis Bossart
2019-08-02 12:10   ` Vinod Koul
2019-08-02 15:23     ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 13/40] soundwire: cadence_master: fix register definition for SLAVE_STATE Pierre-Louis Bossart
2019-08-02 12:12   ` Vinod Koul
2019-07-25 23:40 ` [RFC PATCH 14/40] soundwire: cadence_master: fix definitions for INTSTAT0/1 Pierre-Louis Bossart
2019-08-02 12:13   ` Vinod Koul
2019-07-25 23:40 ` [RFC PATCH 15/40] soundwire: cadence_master: handle multiple status reports per Slave Pierre-Louis Bossart
2019-07-25 22:31   ` [alsa-devel] " Guennadi Liakhovetski
2019-07-25 22:31     ` Guennadi Liakhovetski
2019-07-26 14:09     ` [alsa-devel] " Pierre-Louis Bossart
2019-08-02 12:20   ` Vinod Koul
2019-08-02 15:29     ` Pierre-Louis Bossart
2019-08-02 16:01       ` Vinod Koul
2019-08-02 16:41         ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 16/40] soundwire: cadence_master: improve startup sequence with link hw_reset Pierre-Louis Bossart
2019-07-26  7:22   ` [alsa-devel] " Guennadi Liakhovetski
2019-07-26 14:11     ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 17/40] soundwire: bus: use runtime_pm_get_sync/pm when enabled Pierre-Louis Bossart
2019-07-26  7:39   ` [alsa-devel] " Guennadi Liakhovetski
2019-07-26  7:47     ` Jan Kotas
2019-07-26  8:22       ` Guennadi Liakhovetski
2019-07-26  8:33         ` Jan Kotas
2019-07-26  8:42           ` Guennadi Liakhovetski
2019-07-26 18:08   ` Pierre-Louis Bossart
2019-07-26 18:25     ` [alsa-devel] " Guennadi Liakhovetski
2019-07-26 19:11       ` Andy Shevchenko
2019-07-26 19:08     ` Andy Shevchenko
2019-07-29 22:07       ` [alsa-devel] " Pierre-Louis Bossart
2019-07-30 11:21         ` Andy Shevchenko
2019-07-30 12:57           ` Pierre-Louis Bossart
2019-07-30 15:58             ` Andy Shevchenko
2019-07-30 15:59               ` Andy Shevchenko
2019-08-02 16:58   ` Vinod Koul
2019-08-02 17:20     ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 18/40] soundwire: bus: split handling of Device0 events Pierre-Louis Bossart
2019-08-02 16:59   ` Vinod Koul
2019-07-25 23:40 ` [RFC PATCH 19/40] soundwire: bus: improve dynamic debug comments for enumeration Pierre-Louis Bossart
2019-08-02 17:00   ` Vinod Koul
2019-08-02 17:20     ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 20/40] soundwire: prototypes for suspend/resume Pierre-Louis Bossart
2019-07-26 10:04   ` Cezary Rojewski
2019-07-26 14:15     ` [alsa-devel] " Pierre-Louis Bossart
2019-08-02 17:03   ` Vinod Koul
2019-08-02 17:21     ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 21/40] soundwire: export helpers to find row and column values Pierre-Louis Bossart
2019-07-26 14:43   ` [alsa-devel] " Guennadi Liakhovetski
2019-07-26 15:26     ` Pierre-Louis Bossart
2019-08-02 17:04       ` Vinod Koul
2019-08-05  9:39   ` Sanyog Kale
2019-08-05 15:27     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 22/40] soundwire: include mod_devicetable.h to avoid compiling warnings Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 23/40] soundwire: stream: fix disable sequence Pierre-Louis Bossart
2019-07-26 10:14   ` Cezary Rojewski
2019-07-26 14:17     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-26 14:51   ` Guennadi Liakhovetski
2019-07-26 15:05     ` Pierre-Louis Bossart
2019-08-05  9:56   ` Sanyog Kale
2019-08-05 15:33     ` [alsa-devel] " Pierre-Louis Bossart
2019-08-05 16:32       ` Sanyog Kale
2019-08-05 19:12         ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 24/40] soundwire: cadence_master: use BIOS defaults for frame shape Pierre-Louis Bossart
2019-07-26 10:20   ` Cezary Rojewski
2019-07-26 14:22     ` [alsa-devel] " Pierre-Louis Bossart
2019-08-02 17:10   ` Vinod Koul
2019-08-02 17:24     ` Pierre-Louis Bossart
2019-08-05 10:01   ` Sanyog Kale
2019-07-25 23:40 ` [RFC PATCH 25/40] soundwire: intel: use BIOS information to set clock dividers Pierre-Louis Bossart
2019-08-02 17:17   ` Vinod Koul
2019-08-02 17:29     ` Pierre-Louis Bossart
2019-08-05 10:28   ` Sanyog Kale
2019-08-05 15:40     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 26/40] soundwire: cadence_master: fix divider setting in clock register Pierre-Louis Bossart
2019-07-26  5:19   ` [alsa-devel] " Bard liao
2019-07-26  5:56     ` rander.wang
2019-07-26 14:24     ` Pierre-Louis Bossart
2019-08-02 17:19   ` Vinod Koul
2019-08-02 17:30     ` Pierre-Louis Bossart
2019-08-05 10:40   ` Sanyog Kale
2019-08-05 15:41     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-25 23:40 ` Pierre-Louis Bossart [this message]
2019-07-26 11:07   ` [RFC PATCH 27/40] soundwire: Add Intel resource management algorithm Cezary Rojewski
2019-07-26 14:41     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-26 15:43   ` Guennadi Liakhovetski
2019-07-26 17:55     ` Pierre-Louis Bossart
2019-08-05 16:54   ` Sanyog Kale
2019-08-05 16:54     ` Sanyog Kale
2019-08-05 19:08     ` [alsa-devel] " Pierre-Louis Bossart
2019-08-05 19:08       ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 28/40] soundwire: intel: handle disabled links Pierre-Louis Bossart
2019-08-05 16:57   ` Sanyog Kale
2019-08-05 19:18     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 29/40] soundwire: intel_init: add kernel module parameter to filter out links Pierre-Louis Bossart
2019-07-26 10:30   ` Cezary Rojewski
2019-07-26 14:43     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 30/40] soundwire: cadence_master: add kernel parameter to override interrupt mask Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 31/40] soundwire: intel: move shutdown() callback and don't export symbol Pierre-Louis Bossart
2019-07-26 10:38   ` Cezary Rojewski
2019-07-26 14:46     ` [alsa-devel] " Pierre-Louis Bossart
2019-08-02 17:28       ` Vinod Koul
2019-08-02 17:42         ` Pierre-Louis Bossart
2019-08-14 19:31         ` Pierre-Louis Bossart
2019-08-23  7:34           ` Vinod Koul
2019-08-23 15:57             ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 32/40] soundwire: intel: add helper for initialization Pierre-Louis Bossart
2019-07-26 10:42   ` Cezary Rojewski
2019-07-26 14:55     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 33/40] soundwire: intel: Add basic power management support Pierre-Louis Bossart
2019-07-26 10:50   ` Cezary Rojewski
2019-07-26 14:57     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 34/40] soundwire: intel: ignore disabled links for suspend/resume Pierre-Louis Bossart
2019-08-02 17:30   ` Vinod Koul
2019-08-02 17:44     ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 35/40] soundwire: intel: export helper to exit reset Pierre-Louis Bossart
2019-07-26 15:52   ` [alsa-devel] " Guennadi Liakhovetski
2019-07-26 17:22     ` Pierre-Louis Bossart
2019-08-02 17:31   ` Vinod Koul
2019-08-02 17:44     ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 36/40] soundwire: intel: disable interrupts on suspend Pierre-Louis Bossart
2019-07-26 15:55   ` [alsa-devel] " Guennadi Liakhovetski
2019-07-26 17:26     ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 37/40] soundwire: cadence_master: add hw_reset capability in debugfs Pierre-Louis Bossart
2019-07-26 14:07   ` Greg KH
2019-07-26 15:01     ` [alsa-devel] " Pierre-Louis Bossart
2019-07-26 15:57   ` Guennadi Liakhovetski
2019-07-26 17:31     ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 38/40] soundwire: cadence_master: make clock stop exit configurable on init Pierre-Louis Bossart
2019-07-26 16:02   ` [alsa-devel] " Guennadi Liakhovetski
2019-07-26 17:35     ` Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 39/40] soundwire: intel: add pm_runtime support Pierre-Louis Bossart
2019-07-25 23:40 ` [RFC PATCH 40/40] soundwire: intel: add delay on restart for enumeration Pierre-Louis Bossart
2019-07-26 11:14 ` [RFC PATCH 00/40] soundwire: updates for 5.4 Cezary Rojewski
2019-07-26 15:23   ` [alsa-devel] " Pierre-Louis Bossart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190725234032.21152-28-pierre-louis.bossart@linux.intel.com \
    --to=pierre-louis.bossart@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jank@cadence.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sanyog.r.kale@intel.com \
    --cc=slawomir.blauciak@intel.com \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=tiwai@suse.de \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.