From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Tue, 30 Jul 2019 09:12:05 +0200 Subject: [U-Boot] [PATCH v2 03/11] imx: tpc70: Add board_boot_order() to distinguish between eMMC and SD boot In-Reply-To: <20190730071213.11238-1-lukma@denx.de> References: <20190730071213.11238-1-lukma@denx.de> Message-ID: <20190730071213.11238-4-lukma@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The TPC70 can boot from SD card (debug/development) and eMMC (production). The board_boot_order() function provides a run time check for the device from which one wants to boot (it is selected by GPIO pins setup). Moreover, a fallback to SD card is provided if the detection is not possible or working properly. Signed-off-by: Lukasz Majewski --- board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c index e284d5ec57..e48a577f79 100644 --- a/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c +++ b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c @@ -308,6 +308,26 @@ int board_mmc_init(bd_t *bd) return fsl_esdhc_initialize(bd, &usdhc_cfg[0]); } +void board_boot_order(u32 *spl_boot_list) +{ + u32 boot_device = spl_boot_device(); + u32 reg = imx6_src_get_boot_mode(); + + reg = (reg & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT; + + debug("%s: boot device: 0x%x (0x4 SD, 0x6 eMMC)\n", __func__, reg); + if (boot_device == BOOT_DEVICE_MMC1) + if (reg == IMX6_BMODE_MMC || reg == IMX6_BMODE_EMMC) + boot_device = BOOT_DEVICE_MMC2; + + spl_boot_list[0] = boot_device; + /* + * Below boot device is a 'fallback' - it shall always be possible to + * boot from SD card + */ + spl_boot_list[1] = BOOT_DEVICE_MMC1; +} + void board_init_f(ulong dummy) { /* setup AIPS and disable watchdog */ -- 2.11.0