All of lore.kernel.org
 help / color / mirror / Atom feed
From: Philippe Schenker <dev@pschenker.ch>
To: marcel.ziswiler@toradex.com, max.krummenacher@toradex.com,
	stefan@agner.ch, devicetree@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: Philippe Schenker <philippe.schenker@toradex.com>,
	Fabio Estevam <festevam@gmail.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	NXP Linux Team <linux-imx@nxp.com>,
	Sascha Hauer <s.hauer@pengutronix.de>
Subject: [PATCH 00/22] This patchset holds some common changes that were never upstreamed.
Date: Tue, 30 Jul 2019 16:46:27 +0200	[thread overview]
Message-ID: <20190730144649.19022-1-dev@pschenker.ch> (raw)

From: Philippe Schenker <philippe.schenker@toradex.com>

With latest downstream kernel upgrade, I took the aproach to select
mainline devicetrees and atomically add missing stuff for downstream.

These patches I send here are separated out with changes that also
have a benfit for mainline.

Philippe


Marcel Ziswiler (1):
  ARM: dts: imx7-colibri: make sure module supplies are always on

Max Krummenacher (2):
  ARM: dts: imx6ull-colibri: reduce v_batt current in power off
  ARM: dts: imx6ull: improve can templates

Oleksandr Suvorov (1):
  ARM: dts: add recovery for I2C for iMX7

Philippe Schenker (15):
  ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
  ARM: dts: imx7-colibri: Add sleep mode to ethernet
  ARM: dts: imx7-colibri: Add touch controllers
  ARM: dts: imx6qdl-colibri: add phy to fec
  ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc
  ARM: dts: imx6: Add sleep state to can interfaces
  ARM: dts: imx6: Add touchscreens used on Toradex eval boards
  ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval board
  ARM: dts: apalis-imx6: Add some example I2C devices
  ARM: dts: apalis-imx6: Add some optional I2C devices
  ARM: dts: imx6ull-colibri: Add sleep mode to fec
  ARM: dts: imx6ull-colibri: Add watchdog
  ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri
  ARM: dts: imx6/7-colibri: switch dr_mode to otg
  ARM: dts: imx6ull-colibri: Add touchscreens used with Eval Board

Stefan Agner (3):
  ARM: dts: imx7-colibri: disable HS400
  ARM: dts: imx7-colibri: add GPIO wakeup key
  ARM: dts: imx7-colibri: fix 1.8V/UHS support

 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts  |  52 ++++++++
 arch/arm/boot/dts/imx6q-apalis-eval.dts       | 122 ++++++++++++++++++
 arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts |  19 +++
 arch/arm/boot/dts/imx6q-apalis-ixora.dts      |  19 +++
 arch/arm/boot/dts/imx6qdl-apalis.dtsi         |  27 +++-
 arch/arm/boot/dts/imx6qdl-colibri.dtsi        |  27 +++-
 .../arm/boot/dts/imx6ull-colibri-eval-v3.dtsi |  63 +++++++++
 .../arm/boot/dts/imx6ull-colibri-nonwifi.dtsi |   2 +-
 arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi   |   2 +-
 arch/arm/boot/dts/imx6ull-colibri.dtsi        |  52 +++++++-
 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi   |  51 ++++++++
 arch/arm/boot/dts/imx7-colibri.dtsi           | 114 ++++++++++++++--
 12 files changed, 524 insertions(+), 26 deletions(-)

-- 
2.22.0


WARNING: multiple messages have this Message-ID
From: Philippe Schenker <dev@pschenker.ch>
To: marcel.ziswiler@toradex.com, max.krummenacher@toradex.com,
	stefan@agner.ch, devicetree@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
	linux-kernel@vger.kernel.org,
	Philippe Schenker <philippe.schenker@toradex.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/22] This patchset holds some common changes that were never upstreamed.
Date: Tue, 30 Jul 2019 16:46:27 +0200	[thread overview]
Message-ID: <20190730144649.19022-1-dev@pschenker.ch> (raw)

From: Philippe Schenker <philippe.schenker@toradex.com>

With latest downstream kernel upgrade, I took the aproach to select
mainline devicetrees and atomically add missing stuff for downstream.

These patches I send here are separated out with changes that also
have a benfit for mainline.

Philippe


Marcel Ziswiler (1):
  ARM: dts: imx7-colibri: make sure module supplies are always on

Max Krummenacher (2):
  ARM: dts: imx6ull-colibri: reduce v_batt current in power off
  ARM: dts: imx6ull: improve can templates

Oleksandr Suvorov (1):
  ARM: dts: add recovery for I2C for iMX7

Philippe Schenker (15):
  ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
  ARM: dts: imx7-colibri: Add sleep mode to ethernet
  ARM: dts: imx7-colibri: Add touch controllers
  ARM: dts: imx6qdl-colibri: add phy to fec
  ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc
  ARM: dts: imx6: Add sleep state to can interfaces
  ARM: dts: imx6: Add touchscreens used on Toradex eval boards
  ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval board
  ARM: dts: apalis-imx6: Add some example I2C devices
  ARM: dts: apalis-imx6: Add some optional I2C devices
  ARM: dts: imx6ull-colibri: Add sleep mode to fec
  ARM: dts: imx6ull-colibri: Add watchdog
  ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri
  ARM: dts: imx6/7-colibri: switch dr_mode to otg
  ARM: dts: imx6ull-colibri: Add touchscreens used with Eval Board

Stefan Agner (3):
  ARM: dts: imx7-colibri: disable HS400
  ARM: dts: imx7-colibri: add GPIO wakeup key
  ARM: dts: imx7-colibri: fix 1.8V/UHS support

 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts  |  52 ++++++++
 arch/arm/boot/dts/imx6q-apalis-eval.dts       | 122 ++++++++++++++++++
 arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts |  19 +++
 arch/arm/boot/dts/imx6q-apalis-ixora.dts      |  19 +++
 arch/arm/boot/dts/imx6qdl-apalis.dtsi         |  27 +++-
 arch/arm/boot/dts/imx6qdl-colibri.dtsi        |  27 +++-
 .../arm/boot/dts/imx6ull-colibri-eval-v3.dtsi |  63 +++++++++
 .../arm/boot/dts/imx6ull-colibri-nonwifi.dtsi |   2 +-
 arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi   |   2 +-
 arch/arm/boot/dts/imx6ull-colibri.dtsi        |  52 +++++++-
 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi   |  51 ++++++++
 arch/arm/boot/dts/imx7-colibri.dtsi           | 114 ++++++++++++++--
 12 files changed, 524 insertions(+), 26 deletions(-)

-- 
2.22.0

WARNING: multiple messages have this Message-ID
From: Philippe Schenker <dev@pschenker.ch>
To: marcel.ziswiler@toradex.com, max.krummenacher@toradex.com,
	stefan@agner.ch, devicetree@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
	linux-kernel@vger.kernel.org,
	Philippe Schenker <philippe.schenker@toradex.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/22] This patchset holds some common changes that were never upstreamed.
Date: Tue, 30 Jul 2019 16:46:27 +0200	[thread overview]
Message-ID: <20190730144649.19022-1-dev@pschenker.ch> (raw)

From: Philippe Schenker <philippe.schenker@toradex.com>

With latest downstream kernel upgrade, I took the aproach to select
mainline devicetrees and atomically add missing stuff for downstream.

These patches I send here are separated out with changes that also
have a benfit for mainline.

Philippe


Marcel Ziswiler (1):
  ARM: dts: imx7-colibri: make sure module supplies are always on

Max Krummenacher (2):
  ARM: dts: imx6ull-colibri: reduce v_batt current in power off
  ARM: dts: imx6ull: improve can templates

Oleksandr Suvorov (1):
  ARM: dts: add recovery for I2C for iMX7

Philippe Schenker (15):
  ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
  ARM: dts: imx7-colibri: Add sleep mode to ethernet
  ARM: dts: imx7-colibri: Add touch controllers
  ARM: dts: imx6qdl-colibri: add phy to fec
  ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc
  ARM: dts: imx6: Add sleep state to can interfaces
  ARM: dts: imx6: Add touchscreens used on Toradex eval boards
  ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval board
  ARM: dts: apalis-imx6: Add some example I2C devices
  ARM: dts: apalis-imx6: Add some optional I2C devices
  ARM: dts: imx6ull-colibri: Add sleep mode to fec
  ARM: dts: imx6ull-colibri: Add watchdog
  ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri
  ARM: dts: imx6/7-colibri: switch dr_mode to otg
  ARM: dts: imx6ull-colibri: Add touchscreens used with Eval Board

Stefan Agner (3):
  ARM: dts: imx7-colibri: disable HS400
  ARM: dts: imx7-colibri: add GPIO wakeup key
  ARM: dts: imx7-colibri: fix 1.8V/UHS support

 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts  |  52 ++++++++
 arch/arm/boot/dts/imx6q-apalis-eval.dts       | 122 ++++++++++++++++++
 arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts |  19 +++
 arch/arm/boot/dts/imx6q-apalis-ixora.dts      |  19 +++
 arch/arm/boot/dts/imx6qdl-apalis.dtsi         |  27 +++-
 arch/arm/boot/dts/imx6qdl-colibri.dtsi        |  27 +++-
 .../arm/boot/dts/imx6ull-colibri-eval-v3.dtsi |  63 +++++++++
 .../arm/boot/dts/imx6ull-colibri-nonwifi.dtsi |   2 +-
 arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi   |   2 +-
 arch/arm/boot/dts/imx6ull-colibri.dtsi        |  52 +++++++-
 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi   |  51 ++++++++
 arch/arm/boot/dts/imx7-colibri.dtsi           | 114 ++++++++++++++--
 12 files changed, 524 insertions(+), 26 deletions(-)

-- 
2.22.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-07-30 15:02 UTC|newest]

Thread overview: 84+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-30 14:46 Philippe Schenker [this message]
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 01/22] ARM: dts: imx7-colibri: make sure module supplies are always on Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 02/22] ARM: dts: imx7-colibri: disable HS400 Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 03/22] ARM: dts: imx7-colibri: prepare module device tree for FlexCAN Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 04/22] ARM: dts: imx7-colibri: Add sleep mode to ethernet Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 05/22] ARM: dts: add recovery for I2C for iMX7 Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 06/22] ARM: dts: imx7-colibri: add GPIO wakeup key Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 07/22] ARM: dts: imx7-colibri: fix 1.8V/UHS support Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 08/22] ARM: dts: imx7-colibri: Add touch controllers Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 09/22] ARM: dts: imx6qdl-colibri: add phy to fec Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 10/22] ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 11/22] ARM: dts: imx6: Add sleep state to can interfaces Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-31  7:14   ` Michal Vokáč
2019-07-31  7:14     ` Michal Vokáč
2019-07-31 11:13     ` Philippe Schenker
2019-07-31 11:13       ` Philippe Schenker
2019-07-31 11:13       ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 12/22] ARM: dts: imx6: Add touchscreens used on Toradex eval boards Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 20:46   ` Fabio Estevam
2019-07-30 20:46     ` Fabio Estevam
2019-07-30 20:46     ` Fabio Estevam
2019-07-31  6:43     ` Philippe Schenker
2019-07-31  6:43       ` Philippe Schenker
2019-07-31  6:43       ` Philippe Schenker
2019-07-31  6:54       ` Michal Vokáč
2019-07-31  6:54         ` Michal Vokáč
2019-07-31  6:54         ` Michal Vokáč
2019-07-30 14:46 ` [PATCH 13/22] ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval board Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-31  7:09   ` Michal Vokáč
2019-07-31  7:09     ` Michal Vokáč
2019-07-30 14:46 ` [PATCH 14/22] ARM: dts: apalis-imx6: Add some example I2C devices Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 20:53   ` Fabio Estevam
2019-07-30 20:53     ` Fabio Estevam
2019-07-30 20:53     ` Fabio Estevam
2019-07-31 11:36     ` Philippe Schenker
2019-07-31 11:36       ` Philippe Schenker
2019-07-31 11:36       ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 15/22] ARM: dts: apalis-imx6: Add some optional " Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 20:43   ` Fabio Estevam
2019-07-30 20:43     ` Fabio Estevam
2019-07-30 20:43     ` Fabio Estevam
2019-07-31 11:37     ` Philippe Schenker
2019-07-31 11:37       ` Philippe Schenker
2019-07-31 11:37       ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 16/22] ARM: dts: imx6ull-colibri: Add sleep mode to fec Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 17/22] ARM: dts: imx6ull-colibri: reduce v_batt current in power off Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 18/22] ARM: dts: imx6ull-colibri: Add watchdog Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 19/22] ARM: dts: imx6ull: improve can templates Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 20/22] ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 21/22] ARM: dts: imx6/7-colibri: switch dr_mode to otg Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 22/22] ARM: dts: imx6ull-colibri: Add touchscreens used with Eval Board Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190730144649.19022-1-dev@pschenker.ch \
    --to=dev@pschenker.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel.ziswiler@toradex.com \
    --cc=mark.rutland@arm.com \
    --cc=max.krummenacher@toradex.com \
    --cc=philippe.schenker@toradex.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=stefan@agner.ch \
    --subject='Re: [PATCH 00/22] This patchset holds some common changes that were never upstreamed.' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.