From: Arnd Bergmann <arnd@arndb.de> To: soc@kernel.org Cc: Arnd Bergmann <arnd@arndb.de>, Russell King <linux@armlinux.org.uk>, Dan Williams <dan.j.williams@intel.com>, Vinod Koul <vkoul@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Bartosz Golaszewski <bgolaszewski@baylibre.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org, linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org Subject: [PATCH 6/7] ARM: iop32x: make mach/uncompress.h independent of mach/hardware.h Date: Fri, 9 Aug 2019 18:33:20 +0200 [thread overview] Message-ID: <20190809163334.489360-6-arnd@arndb.de> (raw) In-Reply-To: <20190809163334.489360-1-arnd@arndb.de> All supported uarts use the same address: IQ80321_UART and IQ31244_UART are both defined to the default value of 0xfe800000. By using that as the address unconditionally, all dependencies on other machine headers can be avoided. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm/mach-iop32x/include/mach/uncompress.h | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h index ed4ac3e28fa1..c8548875d942 100644 --- a/arch/arm/mach-iop32x/include/mach/uncompress.h +++ b/arch/arm/mach-iop32x/include/mach/uncompress.h @@ -6,9 +6,8 @@ #include <asm/types.h> #include <asm/mach-types.h> #include <linux/serial_reg.h> -#include <mach/hardware.h> -volatile u8 *uart_base; +#define uart_base ((volatile u8 *)0xfe800000) #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) @@ -23,17 +22,4 @@ static inline void flush(void) { } -static __inline__ void __arch_decomp_setup(unsigned long arch_id) -{ - if (machine_is_iq80321()) - uart_base = (volatile u8 *)IQ80321_UART; - else if (machine_is_iq31244() || machine_is_em7210()) - uart_base = (volatile u8 *)IQ31244_UART; - else - uart_base = (volatile u8 *)0xfe800000; -} - -/* - * nothing to do - */ -#define arch_decomp_setup() __arch_decomp_setup(arch_id) +#define arch_decomp_setup() do { } while (0) -- 2.20.0
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de> To: soc@kernel.org Cc: Arnd Bergmann <arnd@arndb.de>, linux-gpio@vger.kernel.org, Linus Walleij <linus.walleij@linaro.org>, Russell King <linux@armlinux.org.uk>, linux-kernel@vger.kernel.org, Bartosz Golaszewski <bgolaszewski@baylibre.com>, Vinod Koul <vkoul@kernel.org>, linux-i2c@vger.kernel.org, dmaengine@vger.kernel.org, Dan Williams <dan.j.williams@intel.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 6/7] ARM: iop32x: make mach/uncompress.h independent of mach/hardware.h Date: Fri, 9 Aug 2019 18:33:20 +0200 [thread overview] Message-ID: <20190809163334.489360-6-arnd@arndb.de> (raw) In-Reply-To: <20190809163334.489360-1-arnd@arndb.de> All supported uarts use the same address: IQ80321_UART and IQ31244_UART are both defined to the default value of 0xfe800000. By using that as the address unconditionally, all dependencies on other machine headers can be avoided. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm/mach-iop32x/include/mach/uncompress.h | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h index ed4ac3e28fa1..c8548875d942 100644 --- a/arch/arm/mach-iop32x/include/mach/uncompress.h +++ b/arch/arm/mach-iop32x/include/mach/uncompress.h @@ -6,9 +6,8 @@ #include <asm/types.h> #include <asm/mach-types.h> #include <linux/serial_reg.h> -#include <mach/hardware.h> -volatile u8 *uart_base; +#define uart_base ((volatile u8 *)0xfe800000) #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) @@ -23,17 +22,4 @@ static inline void flush(void) { } -static __inline__ void __arch_decomp_setup(unsigned long arch_id) -{ - if (machine_is_iq80321()) - uart_base = (volatile u8 *)IQ80321_UART; - else if (machine_is_iq31244() || machine_is_em7210()) - uart_base = (volatile u8 *)IQ31244_UART; - else - uart_base = (volatile u8 *)0xfe800000; -} - -/* - * nothing to do - */ -#define arch_decomp_setup() __arch_decomp_setup(arch_id) +#define arch_decomp_setup() do { } while (0) -- 2.20.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-09 16:34 UTC|newest] Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-09 16:29 [PATCH 0/7] ARM: preparation for multiplatform iop32x Arnd Bergmann 2019-08-09 16:33 ` [PATCH 1/7] [RFC] ARM: remove Intel iop33x and iop13xx support Arnd Bergmann 2019-08-09 16:33 ` [PATCH 2/7] dma: iop-adma: include prefetch.h Arnd Bergmann 2019-08-09 16:33 ` Arnd Bergmann 2019-08-09 16:33 ` Arnd Bergmann 2019-08-13 4:33 ` Vinod Koul 2019-08-13 4:33 ` Vinod Koul 2019-08-14 15:29 ` Arnd Bergmann 2019-08-14 15:29 ` Arnd Bergmann 2019-08-09 16:33 ` [PATCH 3/7] dma: iop-adma: use correct printk format strings Arnd Bergmann 2019-08-09 16:33 ` Arnd Bergmann 2019-08-13 4:33 ` Vinod Koul 2019-08-13 4:33 ` Vinod Koul 2019-08-09 16:33 ` [PATCH 4/7] dma: iop-adma: allow building without platform headers Arnd Bergmann 2019-08-09 16:33 ` Arnd Bergmann 2019-08-09 16:33 ` [PATCH 5/7] ARM: xscale: fix multi-cpu compilation Arnd Bergmann 2019-08-09 16:33 ` Arnd Bergmann 2019-08-23 7:44 ` Linus Walleij 2019-08-23 7:44 ` Linus Walleij 2019-08-09 16:33 ` Arnd Bergmann [this message] 2019-08-09 16:33 ` [PATCH 6/7] ARM: iop32x: make mach/uncompress.h independent of mach/hardware.h Arnd Bergmann 2019-08-09 16:33 ` [PATCH 7/7] ARM: iop32x: merge everything into mach-iop32x/ Arnd Bergmann 2019-08-09 16:33 ` Arnd Bergmann 2019-08-09 16:57 ` [PATCH 1/7] [RFC] ARM: remove Intel iop33x and iop13xx support Wolfram Sang 2019-08-09 16:57 ` Wolfram Sang 2019-08-09 18:34 ` Dan Williams 2019-08-09 18:34 ` Dan Williams 2019-08-09 18:36 ` Russell King - ARM Linux admin 2019-08-09 18:36 ` Russell King - ARM Linux admin 2019-08-09 19:43 ` Dan Williams 2019-08-09 19:43 ` Dan Williams 2019-08-12 9:44 ` Martin Michlmayr 2019-08-12 9:44 ` Martin Michlmayr 2019-08-14 8:36 ` Linus Walleij 2019-08-14 8:36 ` Linus Walleij 2019-08-14 10:48 ` Arnd Bergmann 2019-08-14 10:48 ` Arnd Bergmann 2019-08-16 15:42 ` Aaro Koskinen 2019-08-16 15:42 ` Aaro Koskinen 2019-08-16 15:58 ` Russell King - ARM Linux admin 2019-08-16 15:58 ` Russell King - ARM Linux admin 2019-08-16 16:15 ` Aaro Koskinen 2019-08-16 16:15 ` Aaro Koskinen 2019-08-09 16:38 ` [PATCH 0/7] ARM: preparation for multiplatform iop32x Lennert Buytenhek 2019-08-15 12:50 ` Arnd Bergmann
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190809163334.489360-6-arnd@arndb.de \ --to=arnd@arndb.de \ --cc=bgolaszewski@baylibre.com \ --cc=dan.j.williams@intel.com \ --cc=dmaengine@vger.kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=soc@kernel.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.