All of lore.kernel.org
 help / color / mirror / Atom feed
From: "André Draszik" <git@andred.net>
To: linux-kernel@vger.kernel.org
Cc: "André Draszik" <git@andred.net>,
	"Peter Chen" <Peter.Chen@nxp.com>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH] usb: chipidea: imx: fix EPROBE_DEFER support during driver probe
Date: Sat, 10 Aug 2019 16:07:58 +0100	[thread overview]
Message-ID: <20190810150758.17694-1-git@andred.net> (raw)

If driver probe needs to be deferred, e.g. because ci_hdrc_add_device()
isn't ready yet, this driver currently misbehaves badly:
    a) success is still reported to the driver core (meaning a 2nd
       probe attempt will never be done), leaving the driver in
       a dysfunctional state and the hardware unusable

    b) driver remove / shutdown OOPSes:
    [  206.786916] Unable to handle kernel paging request at virtual address fffffdff
    [  206.794148] pgd = 880b9f82
    [  206.796890] [fffffdff] *pgd=abf5e861, *pte=00000000, *ppte=00000000
    [  206.803179] Internal error: Oops: 37 [#1] PREEMPT SMP ARM
    [  206.808581] Modules linked in: wl18xx evbug
    [  206.813308] CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 4.19.35+gf345c93b4195 #1
    [  206.821053] Hardware name: Freescale i.MX7 Dual (Device Tree)
    [  206.826813] PC is at ci_hdrc_remove_device+0x4/0x20
    [  206.831699] LR is at ci_hdrc_imx_remove+0x20/0xe8
    [  206.836407] pc : [<805cd4b0>]    lr : [<805d62cc>]    psr: 20000013
    [  206.842678] sp : a806be40  ip : 00000001  fp : 80adbd3c
    [  206.847906] r10: 80b1b794  r9 : 80d5dfe0  r8 : a8192c44
    [  206.853136] r7 : 80db93a0  r6 : a8192c10  r5 : a8192c00  r4 : a93a4a00
    [  206.859668] r3 : 00000000  r2 : a8192ce4  r1 : ffffffff  r0 : fffffdfb
    [  206.866201] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
    [  206.873341] Control: 10c5387d  Table: a9e0c06a  DAC: 00000051
    [  206.879092] Process systemd-shutdow (pid: 1, stack limit = 0xb271353c)
    [  206.885624] Stack: (0xa806be40 to 0xa806c000)
    [  206.889992] be40: a93a4a00 805d62cc a8192c1c a8170e10 a8192c10 8049a490 80d04d08 00000000
    [  206.898179] be60: 00000000 80d0da2c fee1dead 00000000 a806a000 00000058 00000000 80148b08
    [  206.906366] be80: 01234567 80148d8c a9858600 00000000 00000000 00000000 00000000 80d04d08
    [  206.914553] bea0: 00000000 00000000 a82741e0 a9858600 00000024 00000002 a9858608 00000005
    [  206.922740] bec0: 0000001e 8022c058 00000000 00000000 a806bf14 a9858600 00000000 a806befc
    [  206.930927] bee0: a806bf78 00000000 7ee12c30 8022c18c a806bef8 a806befc 00000000 00000001
    [  206.939115] bf00: 00000000 00000024 a806bf14 00000005 7ee13b34 7ee12c68 00000004 7ee13f20
    [  206.947302] bf20: 00000010 7ee12c7c 00000005 7ee12d04 0000000a 76e7dc00 00000001 80d0f140
    [  206.955490] bf40: ab637880 a974de40 60000013 80d0f140 ab6378a0 80d04d08 a8080470 a9858600
    [  206.963677] bf60: a9858600 00000000 00000000 8022c24c 00000000 80144310 00000000 00000000
    [  206.971864] bf80: 80101204 80d04d08 00000000 80d04d08 00000000 00000000 00000003 00000058
    [  206.980051] bfa0: 80101204 80101000 00000000 00000000 fee1dead 28121969 01234567 00000000
    [  206.988237] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000
    [  206.996425] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6 60000030 fee1dead 00000000 00000000
    [  207.004622] [<805cd4b0>] (ci_hdrc_remove_device) from [<805d62cc>] (ci_hdrc_imx_remove+0x20/0xe8)
    [  207.013509] [<805d62cc>] (ci_hdrc_imx_remove) from [<8049a490>] (device_shutdown+0x16c/0x218)
    [  207.022050] [<8049a490>] (device_shutdown) from [<80148b08>] (kernel_restart+0xc/0x50)
    [  207.029980] [<80148b08>] (kernel_restart) from [<80148d8c>] (sys_reboot+0xf4/0x1f0)
    [  207.037648] [<80148d8c>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54)
    [  207.045308] Exception stack(0xa806bfa8 to 0xa806bff0)
    [  207.050368] bfa0:                   00000000 00000000 fee1dead 28121969 01234567 00000000
    [  207.058554] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000
    [  207.066737] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6
    [  207.071799] Code: ebffffa8 e3a00000 e8bd8010 e92d4010 (e5904004)
    [  207.078021] ---[ end trace be47424e3fd46e9f ]---
    [  207.082647] Kernel panic - not syncing: Fatal exception
    [  207.087894] ---[ end Kernel panic - not syncing: Fatal exception ]---

    c) the error path in combination with driver removal causes
       imbalanced calls to the clk_*() and pm_()* APIs

a) happens because the original intended return value is
   overwritten (with 0) by the return code of
   regulator_disable() in ci_hdrc_imx_probe()'s error path
b) happens because ci_pdev is -EPROBE_DEFER, which causes
   ci_hdrc_remove_device() to OOPS

Fix a) by being more careful in ci_hdrc_imx_probe()'s error
path and not overwriting the real error code

Fix b) by calling the respective cleanup functions during
remove only when needed (when ci_pdev != NULL, i.e. when
everything was initialised correctly). This also has the
side effect of not causing imbalanced clk_*() and pm_*()
API calls as part of the error code path.

Fixes: 7c8e8909417e: ("usb: chipidea: imx: add HSIC support")
Signed-off-by: André Draszik <git@andred.net>
CC: Peter Chen <Peter.Chen@nxp.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
CC: linux-usb@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-kernel@vger.kernel.org
---
 drivers/usb/chipidea/ci_hdrc_imx.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index b5abfe89190c..df8812c30640 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -454,9 +454,11 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 	imx_disable_unprepare_clks(dev);
 disable_hsic_regulator:
 	if (data->hsic_pad_regulator)
-		ret = regulator_disable(data->hsic_pad_regulator);
+		/* don't overwrite original ret (cf. EPROBE_DEFER) */
+		regulator_disable(data->hsic_pad_regulator);
 	if (pdata.flags & CI_HDRC_PMQOS)
 		pm_qos_remove_request(&data->pm_qos_req);
+	data->ci_pdev = NULL;
 	return ret;
 }
 
@@ -469,14 +471,17 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
 		pm_runtime_disable(&pdev->dev);
 		pm_runtime_put_noidle(&pdev->dev);
 	}
-	ci_hdrc_remove_device(data->ci_pdev);
+	if (data->ci_pdev)
+		ci_hdrc_remove_device(data->ci_pdev);
 	if (data->override_phy_control)
 		usb_phy_shutdown(data->phy);
-	imx_disable_unprepare_clks(&pdev->dev);
-	if (data->plat_data->flags & CI_HDRC_PMQOS)
-		pm_qos_remove_request(&data->pm_qos_req);
-	if (data->hsic_pad_regulator)
-		regulator_disable(data->hsic_pad_regulator);
+	if (data->ci_pdev) {
+		imx_disable_unprepare_clks(&pdev->dev);
+		if (data->plat_data->flags & CI_HDRC_PMQOS)
+			pm_qos_remove_request(&data->pm_qos_req);
+		if (data->hsic_pad_regulator)
+			regulator_disable(data->hsic_pad_regulator);
+	}
 
 	return 0;
 }
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: "André Draszik" <git@andred.net>
To: linux-kernel@vger.kernel.org
Cc: "Peter Chen" <Peter.Chen@nxp.com>,
	"Fabio Estevam" <festevam@gmail.com>,
	"André Draszik" <git@andred.net>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	linux-usb@vger.kernel.org, "NXP Linux Team" <linux-imx@nxp.com>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Shawn Guo" <shawnguo@kernel.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] usb: chipidea: imx: fix EPROBE_DEFER support during driver probe
Date: Sat, 10 Aug 2019 16:07:58 +0100	[thread overview]
Message-ID: <20190810150758.17694-1-git@andred.net> (raw)

If driver probe needs to be deferred, e.g. because ci_hdrc_add_device()
isn't ready yet, this driver currently misbehaves badly:
    a) success is still reported to the driver core (meaning a 2nd
       probe attempt will never be done), leaving the driver in
       a dysfunctional state and the hardware unusable

    b) driver remove / shutdown OOPSes:
    [  206.786916] Unable to handle kernel paging request at virtual address fffffdff
    [  206.794148] pgd = 880b9f82
    [  206.796890] [fffffdff] *pgd=abf5e861, *pte=00000000, *ppte=00000000
    [  206.803179] Internal error: Oops: 37 [#1] PREEMPT SMP ARM
    [  206.808581] Modules linked in: wl18xx evbug
    [  206.813308] CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 4.19.35+gf345c93b4195 #1
    [  206.821053] Hardware name: Freescale i.MX7 Dual (Device Tree)
    [  206.826813] PC is at ci_hdrc_remove_device+0x4/0x20
    [  206.831699] LR is at ci_hdrc_imx_remove+0x20/0xe8
    [  206.836407] pc : [<805cd4b0>]    lr : [<805d62cc>]    psr: 20000013
    [  206.842678] sp : a806be40  ip : 00000001  fp : 80adbd3c
    [  206.847906] r10: 80b1b794  r9 : 80d5dfe0  r8 : a8192c44
    [  206.853136] r7 : 80db93a0  r6 : a8192c10  r5 : a8192c00  r4 : a93a4a00
    [  206.859668] r3 : 00000000  r2 : a8192ce4  r1 : ffffffff  r0 : fffffdfb
    [  206.866201] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
    [  206.873341] Control: 10c5387d  Table: a9e0c06a  DAC: 00000051
    [  206.879092] Process systemd-shutdow (pid: 1, stack limit = 0xb271353c)
    [  206.885624] Stack: (0xa806be40 to 0xa806c000)
    [  206.889992] be40: a93a4a00 805d62cc a8192c1c a8170e10 a8192c10 8049a490 80d04d08 00000000
    [  206.898179] be60: 00000000 80d0da2c fee1dead 00000000 a806a000 00000058 00000000 80148b08
    [  206.906366] be80: 01234567 80148d8c a9858600 00000000 00000000 00000000 00000000 80d04d08
    [  206.914553] bea0: 00000000 00000000 a82741e0 a9858600 00000024 00000002 a9858608 00000005
    [  206.922740] bec0: 0000001e 8022c058 00000000 00000000 a806bf14 a9858600 00000000 a806befc
    [  206.930927] bee0: a806bf78 00000000 7ee12c30 8022c18c a806bef8 a806befc 00000000 00000001
    [  206.939115] bf00: 00000000 00000024 a806bf14 00000005 7ee13b34 7ee12c68 00000004 7ee13f20
    [  206.947302] bf20: 00000010 7ee12c7c 00000005 7ee12d04 0000000a 76e7dc00 00000001 80d0f140
    [  206.955490] bf40: ab637880 a974de40 60000013 80d0f140 ab6378a0 80d04d08 a8080470 a9858600
    [  206.963677] bf60: a9858600 00000000 00000000 8022c24c 00000000 80144310 00000000 00000000
    [  206.971864] bf80: 80101204 80d04d08 00000000 80d04d08 00000000 00000000 00000003 00000058
    [  206.980051] bfa0: 80101204 80101000 00000000 00000000 fee1dead 28121969 01234567 00000000
    [  206.988237] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000
    [  206.996425] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6 60000030 fee1dead 00000000 00000000
    [  207.004622] [<805cd4b0>] (ci_hdrc_remove_device) from [<805d62cc>] (ci_hdrc_imx_remove+0x20/0xe8)
    [  207.013509] [<805d62cc>] (ci_hdrc_imx_remove) from [<8049a490>] (device_shutdown+0x16c/0x218)
    [  207.022050] [<8049a490>] (device_shutdown) from [<80148b08>] (kernel_restart+0xc/0x50)
    [  207.029980] [<80148b08>] (kernel_restart) from [<80148d8c>] (sys_reboot+0xf4/0x1f0)
    [  207.037648] [<80148d8c>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54)
    [  207.045308] Exception stack(0xa806bfa8 to 0xa806bff0)
    [  207.050368] bfa0:                   00000000 00000000 fee1dead 28121969 01234567 00000000
    [  207.058554] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000
    [  207.066737] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6
    [  207.071799] Code: ebffffa8 e3a00000 e8bd8010 e92d4010 (e5904004)
    [  207.078021] ---[ end trace be47424e3fd46e9f ]---
    [  207.082647] Kernel panic - not syncing: Fatal exception
    [  207.087894] ---[ end Kernel panic - not syncing: Fatal exception ]---

    c) the error path in combination with driver removal causes
       imbalanced calls to the clk_*() and pm_()* APIs

a) happens because the original intended return value is
   overwritten (with 0) by the return code of
   regulator_disable() in ci_hdrc_imx_probe()'s error path
b) happens because ci_pdev is -EPROBE_DEFER, which causes
   ci_hdrc_remove_device() to OOPS

Fix a) by being more careful in ci_hdrc_imx_probe()'s error
path and not overwriting the real error code

Fix b) by calling the respective cleanup functions during
remove only when needed (when ci_pdev != NULL, i.e. when
everything was initialised correctly). This also has the
side effect of not causing imbalanced clk_*() and pm_*()
API calls as part of the error code path.

Fixes: 7c8e8909417e: ("usb: chipidea: imx: add HSIC support")
Signed-off-by: André Draszik <git@andred.net>
CC: Peter Chen <Peter.Chen@nxp.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
CC: linux-usb@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-kernel@vger.kernel.org
---
 drivers/usb/chipidea/ci_hdrc_imx.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index b5abfe89190c..df8812c30640 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -454,9 +454,11 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 	imx_disable_unprepare_clks(dev);
 disable_hsic_regulator:
 	if (data->hsic_pad_regulator)
-		ret = regulator_disable(data->hsic_pad_regulator);
+		/* don't overwrite original ret (cf. EPROBE_DEFER) */
+		regulator_disable(data->hsic_pad_regulator);
 	if (pdata.flags & CI_HDRC_PMQOS)
 		pm_qos_remove_request(&data->pm_qos_req);
+	data->ci_pdev = NULL;
 	return ret;
 }
 
@@ -469,14 +471,17 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
 		pm_runtime_disable(&pdev->dev);
 		pm_runtime_put_noidle(&pdev->dev);
 	}
-	ci_hdrc_remove_device(data->ci_pdev);
+	if (data->ci_pdev)
+		ci_hdrc_remove_device(data->ci_pdev);
 	if (data->override_phy_control)
 		usb_phy_shutdown(data->phy);
-	imx_disable_unprepare_clks(&pdev->dev);
-	if (data->plat_data->flags & CI_HDRC_PMQOS)
-		pm_qos_remove_request(&data->pm_qos_req);
-	if (data->hsic_pad_regulator)
-		regulator_disable(data->hsic_pad_regulator);
+	if (data->ci_pdev) {
+		imx_disable_unprepare_clks(&pdev->dev);
+		if (data->plat_data->flags & CI_HDRC_PMQOS)
+			pm_qos_remove_request(&data->pm_qos_req);
+		if (data->hsic_pad_regulator)
+			regulator_disable(data->hsic_pad_regulator);
+	}
 
 	return 0;
 }
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-08-10 15:08 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-10 15:07 André Draszik [this message]
2019-08-10 15:07 ` [PATCH] usb: chipidea: imx: fix EPROBE_DEFER support during driver probe André Draszik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190810150758.17694-1-git@andred.net \
    --to=git@andred.net \
    --cc=Peter.Chen@nxp.com \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.