From mboxrd@z Thu Jan 1 00:00:00 1970 From: Xiaowei Bao Date: Tue, 20 Aug 2019 06:59:35 +0000 Subject: [U-Boot] [PATCH v5 2/5] dm: spi: Convert Freescale ESPI driver to driver model In-Reply-To: <20190820065938.20722-1-xiaowei.bao@nxp.com> References: <20190820065938.20722-1-xiaowei.bao@nxp.com> Message-ID: <20190820065938.20722-2-xiaowei.bao@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Chuanhua Han Modify the Freescale ESPI driver to support the driver model. Also resolved the following problems: ===================== WARNING ====================== This board does not use CONFIG_DM_SPI. Please update the board before v2019.04 for no dm conversion and v2019.07 for partially dm converted drivers. Failure to update can lead to driver/board removal See doc/driver-model/MIGRATION.txt for more info. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_SPI_FLASH. Please update the board to use CONFIG_SPI_FLASH before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: Chuanhua Han --- Changes in v5: - Modify the function spi_cs_activate to fsl_spi_cs_activate. - Move cs to the parameter of the fsl_spi_cs_activate function. Changes in v4: - Update copyright information. - Move the fsl_espi_platdata data structure to the include/dm/platform_data/. - Merge the contents of the fsl_espi_priv structure into the fsl_spi_slave structure. - Implement the fsl_espi_set_speed function. - Implement the fsl_espi_set_mode function. - Implement the espi_release_bus function. - Remove unwanted fsl_espi_bind functions. - Implement the fsl_espi_child_pre_probe function as needed. - Use #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA). Changes in v3: - Add a cover-letter for this patch set. Changes in v2: - The fsl_espi driver support both OF_CONTROL and PLATDATA. drivers/spi/fsl_espi.c | 445 ++++++++++++++++++++++++++---------- include/dm/platform_data/fsl_espi.h | 16 ++ 2 files changed, 337 insertions(+), 124 deletions(-) create mode 100644 include/dm/platform_data/fsl_espi.h diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index 7444ae1..4b33fae 100644 --- a/drivers/spi/fsl_espi.c +++ b/drivers/spi/fsl_espi.c @@ -3,18 +3,25 @@ * eSPI controller driver. * * Copyright 2010-2011 Freescale Semiconductor, Inc. + * Copyright 2019 NXP * Author: Mingkai Hu (Mingkai.hu at freescale.com) + * Chuanhua Han (chuanhua.han at nxp.com) */ #include - #include #include #include +#include +#include +#include +#include struct fsl_spi_slave { struct spi_slave slave; ccsr_espi_t *espi; + u32 speed_hz; + unsigned int cs; unsigned int div16; unsigned int pm; int tx_timeout; @@ -28,6 +35,9 @@ struct fsl_spi_slave { #define to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave) #define US_PER_SECOND 1000000UL +/* default SCK frequency, unit: HZ */ +#define FSL_ESPI_DEFAULT_SCK_FREQ 10000000 + #define ESPI_MAX_CS_NUM 4 #define ESPI_FIFO_WIDTH_BIT 32 @@ -62,116 +72,27 @@ struct fsl_spi_slave { #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct fsl_spi_slave *fsl; - sys_info_t sysinfo; - unsigned long spibrg = 0; - unsigned long spi_freq = 0; - unsigned char pm = 0; - - if (!spi_cs_is_valid(bus, cs)) - return NULL; - - fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); - if (!fsl) - return NULL; - - fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); - fsl->mode = mode; - fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; - - /* Set eSPI BRG clock source */ - get_sys_info(&sysinfo); - spibrg = sysinfo.freq_systembus / 2; - fsl->div16 = 0; - if ((spibrg / max_hz) > 32) { - fsl->div16 = ESPI_CSMODE_DIV16; - pm = spibrg / (max_hz * 16 * 2); - if (pm > 16) { - pm = 16; - debug("Requested speed is too low: %d Hz, %ld Hz " - "is used.\n", max_hz, spibrg / (32 * 16)); - } - } else - pm = spibrg / (max_hz * 2); - if (pm) - pm--; - fsl->pm = pm; - - if (fsl->div16) - spi_freq = spibrg / ((pm + 1) * 2 * 16); - else - spi_freq = spibrg / ((pm + 1) * 2); - - /* set tx_timeout to 10 times of one espi FIFO entry go out */ - fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * ESPI_FIFO_WIDTH_BIT - * 10), spi_freq); - - return &fsl->slave; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); - free(fsl); -} - -int spi_claim_bus(struct spi_slave *slave) +void fsl_spi_cs_activate(struct spi_slave *slave, uint cs) { struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); ccsr_espi_t *espi = fsl->espi; - unsigned char pm = fsl->pm; - unsigned int cs = slave->cs; - unsigned int mode = fsl->mode; - unsigned int div16 = fsl->div16; - int i; - - debug("%s: bus:%i cs:%i\n", __func__, slave->bus, cs); - - /* Enable eSPI interface */ - out_be32(&espi->mode, ESPI_MODE_RXTHR(3) - | ESPI_MODE_TXTHR(4) | ESPI_MODE_EN); - - out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */ - out_be32(&espi->mask, 0x00000000); /* Mask all eSPI interrupts */ - - /* Init CS mode interface */ - for (i = 0; i < ESPI_MAX_CS_NUM; i++) - out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL); - - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) & - ~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16 - | ESPI_CSMODE_CI_INACTIVEHIGH | ESPI_CSMODE_CP_BEGIN_EDGCLK - | ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF))); - - /* Set eSPI BRG clock source */ - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) - | ESPI_CSMODE_PM(pm) | div16); - - /* Set eSPI mode */ - if (mode & SPI_CPHA) - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) - | ESPI_CSMODE_CP_BEGIN_EDGCLK); - if (mode & SPI_CPOL) - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) - | ESPI_CSMODE_CI_INACTIVEHIGH); - - /* Character bit order: msb first */ - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) - | ESPI_CSMODE_REV_MSB_FIRST); - - /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */ - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) - | ESPI_CSMODE_LEN(7)); + unsigned int com = 0; + size_t data_len = fsl->data_len; - return 0; + com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF)); + com |= ESPI_COM_CS(cs); + com |= ESPI_COM_TRANLEN(data_len - 1); + out_be32(&espi->com, com); } -void spi_release_bus(struct spi_slave *slave) +void fsl_spi_cs_deactivate(struct spi_slave *slave) { + struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); + ccsr_espi_t *espi = fsl->espi; + /* clear the RXCNT and TXCNT */ + out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN)); + out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN); } static void fsl_espi_tx(struct fsl_spi_slave *fsl, const void *dout) @@ -204,7 +125,8 @@ static void fsl_espi_tx(struct fsl_spi_slave *fsl, const void *dout) debug("***spi_xfer:...Tx timeout! event = %08x\n", event); } -static int fsl_espi_rx(struct fsl_spi_slave *fsl, void *din, unsigned int bytes) +static int fsl_espi_rx(struct fsl_spi_slave *fsl, void *din, + unsigned int bytes) { ccsr_espi_t *espi = fsl->espi; unsigned int tmpdin, rx_times; @@ -236,10 +158,17 @@ static int fsl_espi_rx(struct fsl_spi_slave *fsl, void *din, unsigned int bytes) return bytes; } -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, - void *data_in, unsigned long flags) +void espi_release_bus(struct fsl_spi_slave *fsl) { - struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); + /* Disable the SPI hardware */ + out_be32(&fsl->espi->mode, + in_be32(&fsl->espi->mode) & (~ESPI_MODE_EN)); +} + +int espi_xfer(struct fsl_spi_slave *fsl, uint cs, unsigned int bitlen, + const void *data_out, void *data_in, unsigned long flags) +{ + struct spi_slave *slave = &fsl->slave; ccsr_espi_t *espi = fsl->espi; unsigned int event, rx_bytes; const void *dout = NULL; @@ -258,13 +187,14 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, max_tran_len = fsl->max_transfer_length; switch (flags) { case SPI_XFER_BEGIN: - cmd_len = fsl->cmd_len = data_len; + cmd_len = data_len; + fsl->cmd_len = cmd_len; memcpy(cmd_buf, data_out, cmd_len); return 0; case 0: case SPI_XFER_END: if (bitlen == 0) { - spi_cs_deactivate(slave); + fsl_spi_cs_deactivate(slave); return 0; } buf_len = 2 * cmd_len + min(data_len, (size_t)max_tran_len); @@ -304,7 +234,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, num_blks = DIV_ROUND_UP(tran_len + cmd_len, 4); num_bytes = (tran_len + cmd_len) % 4; fsl->data_len = tran_len + cmd_len; - spi_cs_activate(slave); + fsl_spi_cs_activate(slave, cs); /* Clear all eSPI events */ out_be32(&espi->event , 0xffffffff); @@ -347,37 +277,304 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, *(int *)buffer += tran_len; } } - spi_cs_deactivate(slave); + fsl_spi_cs_deactivate(slave); } free(buffer); return 0; } +void espi_claim_bus(struct fsl_spi_slave *fsl, unsigned int cs) +{ + ccsr_espi_t *espi = fsl->espi; + unsigned char pm = fsl->pm; + unsigned int mode = fsl->mode; + unsigned int div16 = fsl->div16; + int i; + + /* Enable eSPI interface */ + out_be32(&espi->mode, ESPI_MODE_RXTHR(3) + | ESPI_MODE_TXTHR(4) | ESPI_MODE_EN); + + out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */ + out_be32(&espi->mask, 0x00000000); /* Mask all eSPI interrupts */ + + /* Init CS mode interface */ + for (i = 0; i < ESPI_MAX_CS_NUM; i++) + out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL); + + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) & + ~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16 + | ESPI_CSMODE_CI_INACTIVEHIGH | ESPI_CSMODE_CP_BEGIN_EDGCLK + | ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF))); + + /* Set eSPI BRG clock source */ + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_PM(pm) | div16); + + /* Set eSPI mode */ + if (mode & SPI_CPHA) + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_CP_BEGIN_EDGCLK); + if (mode & SPI_CPOL) + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_CI_INACTIVEHIGH); + + /* Character bit order: msb first */ + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_REV_MSB_FIRST); + + /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */ + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_LEN(7)); +} + +void espi_setup_slave(struct fsl_spi_slave *fsl) +{ + unsigned int max_hz; + sys_info_t sysinfo; + unsigned long spibrg = 0; + unsigned long spi_freq = 0; + unsigned char pm = 0; + + max_hz = fsl->speed_hz; + + get_sys_info(&sysinfo); + spibrg = sysinfo.freq_systembus / 2; + fsl->div16 = 0; + if ((spibrg / max_hz) > 32) { + fsl->div16 = ESPI_CSMODE_DIV16; + pm = spibrg / (max_hz * 16 * 2); + if (pm > 16) { + pm = 16; + debug("max_hz is too low: %d Hz, %ld Hz is used.\n", + max_hz, spibrg / (32 * 16)); + } + } else { + pm = spibrg / (max_hz * 2); + } + if (pm) + pm--; + fsl->pm = pm; + + if (fsl->div16) + spi_freq = spibrg / ((pm + 1) * 2 * 16); + else + spi_freq = spibrg / ((pm + 1) * 2); + + /* set tx_timeout to 10 times of one espi FIFO entry go out */ + fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * ESPI_FIFO_WIDTH_BIT + * 10), spi_freq);/* Set eSPI BRG clock source */ +} + +#ifndef CONFIG_DM_SPI int spi_cs_is_valid(unsigned int bus, unsigned int cs) { return bus == 0 && cs < ESPI_MAX_CS_NUM; } -void spi_cs_activate(struct spi_slave *slave) +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct fsl_spi_slave *fsl; + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); + if (!fsl) + return NULL; + + fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); + fsl->mode = mode; + fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; + fsl->speed_hz = max_hz; + + espi_setup_slave(fsl); + + return &fsl->slave; +} + +void spi_free_slave(struct spi_slave *slave) { struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); - ccsr_espi_t *espi = fsl->espi; - unsigned int com = 0; - size_t data_len = fsl->data_len; - com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF)); - com |= ESPI_COM_CS(slave->cs); - com |= ESPI_COM_TRANLEN(data_len - 1); - out_be32(&espi->com, com); + free(fsl); } -void spi_cs_deactivate(struct spi_slave *slave) +int spi_claim_bus(struct spi_slave *slave) { struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); - ccsr_espi_t *espi = fsl->espi; - /* clear the RXCNT and TXCNT */ - out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN)); - out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN); + espi_claim_bus(fsl, slave->cs); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); + + espi_release_bus(fsl); +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct fsl_spi_slave *fsl = (struct fsl_spi_slave *)slave; + + return espi_xfer(fsl, slave->cs, bitlen, dout, din, flags); +} +#else +static void __espi_set_speed(struct fsl_spi_slave *fsl) +{ + espi_setup_slave(fsl); + + /* Set eSPI BRG clock source */ + out_be32(&fsl->espi->csmode[fsl->cs], + in_be32(&fsl->espi->csmode[fsl->cs]) + | ESPI_CSMODE_PM(fsl->pm) | fsl->div16); +} + +static void __espi_set_mode(struct fsl_spi_slave *fsl) +{ + /* Set eSPI mode */ + if (fsl->mode & SPI_CPHA) + out_be32(&fsl->espi->csmode[fsl->cs], + in_be32(&fsl->espi->csmode[fsl->cs]) + | ESPI_CSMODE_CP_BEGIN_EDGCLK); + if (fsl->mode & SPI_CPOL) + out_be32(&fsl->espi->csmode[fsl->cs], + in_be32(&fsl->espi->csmode[fsl->cs]) + | ESPI_CSMODE_CI_INACTIVEHIGH); +} + +static int fsl_espi_claim_bus(struct udevice *dev) +{ + struct udevice *bus = dev->parent; + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + espi_claim_bus(fsl, fsl->cs); + + return 0; +} + +static int fsl_espi_release_bus(struct udevice *dev) +{ + struct udevice *bus = dev->parent; + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + espi_release_bus(fsl); + + return 0; +} + +static int fsl_espi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + struct udevice *bus = dev->parent; + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + return espi_xfer(fsl, fsl->cs, bitlen, dout, din, flags); +} + +static int fsl_espi_set_speed(struct udevice *bus, uint speed) +{ + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + debug("%s speed %u\n", __func__, speed); + fsl->speed_hz = speed; + + __espi_set_speed(fsl); + + return 0; +} + +static int fsl_espi_set_mode(struct udevice *bus, uint mode) +{ + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + debug("%s mode %u\n", __func__, mode); + fsl->mode = mode; + + __espi_set_mode(fsl); + + return 0; } + +static int fsl_espi_child_pre_probe(struct udevice *dev) +{ + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + struct udevice *bus = dev->parent; + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + debug("%s cs %u\n", __func__, slave_plat->cs); + fsl->cs = slave_plat->cs; + + return 0; +} + +static int fsl_espi_probe(struct udevice *bus) +{ + struct fsl_espi_platdata *plat = dev_get_platdata(bus); + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + fsl->espi = (ccsr_espi_t *)((u32)plat->regs_addr); + fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; + fsl->speed_hz = plat->speed_hz; + + debug("%s probe done, bus-num %d.\n", bus->name, bus->seq); + + return 0; +} + +static const struct dm_spi_ops fsl_espi_ops = { + .claim_bus = fsl_espi_claim_bus, + .release_bus = fsl_espi_release_bus, + .xfer = fsl_espi_xfer, + .set_speed = fsl_espi_set_speed, + .set_mode = fsl_espi_set_mode, +}; + +#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) +static int fsl_espi_ofdata_to_platdata(struct udevice *bus) +{ + fdt_addr_t addr; + struct fsl_espi_platdata *plat = bus->platdata; + const void *blob = gd->fdt_blob; + int node = dev_of_offset(bus); + + addr = dev_read_addr(bus); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + plat->regs_addr = lower_32_bits(addr); + plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency", + FSL_ESPI_DEFAULT_SCK_FREQ); + + debug("ESPI: regs=%p, max-frequency=%d\n", + &plat->regs_addr, plat->speed_hz); + + return 0; +} + +static const struct udevice_id fsl_espi_ids[] = { + { .compatible = "fsl,mpc8536-espi" }, + { } +}; +#endif + +U_BOOT_DRIVER(fsl_espi) = { + .name = "fsl_espi", + .id = UCLASS_SPI, +#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) + .of_match = fsl_espi_ids, + .ofdata_to_platdata = fsl_espi_ofdata_to_platdata, +#endif + .ops = &fsl_espi_ops, + .platdata_auto_alloc_size = sizeof(struct fsl_espi_platdata), + .priv_auto_alloc_size = sizeof(struct fsl_spi_slave), + .probe = fsl_espi_probe, + .child_pre_probe = fsl_espi_child_pre_probe, +}; +#endif diff --git a/include/dm/platform_data/fsl_espi.h b/include/dm/platform_data/fsl_espi.h new file mode 100644 index 0000000..812933f --- /dev/null +++ b/include/dm/platform_data/fsl_espi.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 NXP + */ + +#ifndef __fsl_espi_h +#define __fsl_espi_h + +struct fsl_espi_platdata { + uint flags; + uint speed_hz; + uint num_chipselect; + fdt_addr_t regs_addr; +}; + +#endif /* __fsl_espi_h */ -- 2.9.5