All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: "Shankar, Uma" <uma.shankar@intel.com>
Cc: "intel-gfx@lists.freedesktop.org" <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH] drm/i915/tgl: Lower cdclk for sub 4k resolutions
Date: Tue, 20 Aug 2019 16:43:13 +0300	[thread overview]
Message-ID: <20190820134313.GC5942@intel.com> (raw)
In-Reply-To: <E7C9878FBA1C6D42A1CA3F62AEB6945F821CABFE@BGSMSX104.gar.corp.intel.com>

On Tue, Aug 20, 2019 at 01:35:37PM +0000, Shankar, Uma wrote:
> 
> 
> >-----Original Message-----
> >From: Kahola, Mika
> >Sent: Tuesday, August 20, 2019 4:37 PM
> >To: intel-gfx@lists.freedesktop.org
> >Cc: Shankar, Uma <uma.shankar@intel.com>; Kahola, Mika
> ><mika.kahola@intel.com>
> >Subject: [PATCH] drm/i915/tgl: Lower cdclk for sub 4k resolutions
> >
> >In order to achieve improved power savings we can tune down CD clock frequency for
> >sub 4k resolutions. The maximum CD clock frequency for sub 4k resolutions is set to
> >172.8 MHz.
> >
> >Signed-off-by: Mika Kahola <mika.kahola@intel.com>
> >---
> > drivers/gpu/drm/i915/display/intel_cdclk.c | 26 +++++++++++++++++++++-
> >drivers/gpu/drm/i915/display/intel_cdclk.h |  3 +++
> > 2 files changed, 28 insertions(+), 1 deletion(-)
> >
> >diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c
> >b/drivers/gpu/drm/i915/display/intel_cdclk.c
> >index d0bc42e5039c..1d6c7bc79470 100644
> >--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> >+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> >@@ -2610,6 +2610,24 @@ static int intel_compute_max_dotclk(struct
> >drm_i915_private *dev_priv)
> > 		return max_cdclk_freq*90/100;
> > }
> >
> >+bool mode_is_4k(struct drm_i915_private *dev_priv) {
> >+	struct intel_crtc *crtc;
> >+	struct intel_crtc_state *pipe_config;
> >+
> >+	for_each_intel_crtc(&dev_priv->drm, crtc) {
> >+		pipe_config = to_intel_crtc_state(crtc->base.state);
> >+
> >+		if (pipe_config->base.active) {
> >+			if (pipe_config->pipe_src_w >= WIDTH_4K &&
> >+			    pipe_config->pipe_src_h >= HEIGHT_4K)
> >+				return true;
> >+		}
> >+	}
> >+
> >+	return false;
> >+}
> >+
> > /**
> >  * intel_update_max_cdclk - Determine the maximum support CDCLK frequency
> >  * @dev_priv: i915 device
> >@@ -2620,7 +2638,13 @@ static int intel_compute_max_dotclk(struct
> >drm_i915_private *dev_priv)
> >  */
> > void intel_update_max_cdclk(struct drm_i915_private *dev_priv)  {
> >-	if (IS_ELKHARTLAKE(dev_priv)) {
> >+	/*
> >+	 * Use lower CDCLK frequency on Tigerlake when selected
> >+	 * mode is less than 4k.
> >+	 */
> >+	if (INTEL_GEN(dev_priv) >= 12 && !mode_is_4k(dev_priv)) {
> >+		dev_priv->max_cdclk_freq = 172800;
> >+	} else if (IS_ELKHARTLAKE(dev_priv)) {
> 
> Setting the max cd clock supported itself to a lower value is not a good idea.
> This should return what is the max frequency of cd clock the hardware supports.
> Driver is not going to program this to max based on this data.
> 
> Actual cd clock which will be programmed in hardware should be based on the
> maximum pixel clock we are driving. So if we are not driving 4K and say at 1920x1080, pixel
> clock will be less and we should be selecting a lower value of cd clock in that case which
> gets programmed in CDCLK_CTL. But max cd clock still remains what maximum the platform can
> support. You can check intel_compute_min_cdclk which calculates the minimum cd clock required.
> 
> So when we just have 1920x1080@60Hz pixel clock of 148500, 
> min cd clock required should be 148500 and nearest higher value of CD Clock will be 172.8Mhz.
> Similarly for 4096x2160@60, pixel clock 556188, min cd clock calculated will be 556.188 MHz, thus
> getting nearest supported cd clock value of 556 or 648Mhz.
> 
> This should be taken care by this logic in driver. 
> 
> Also with the current patch, modes like 2560x1600@60, pixel clock 268.5MHz will not work. This will need
> cd clock of 324Mhz (or 307, 312 whatever are supported on the platform. 

glk+ pump out two pixels per clock, so we need half of what you said.

> 
> > 		if (dev_priv->cdclk.hw.ref == 24000)
> > 			dev_priv->max_cdclk_freq = 552000;
> > 		else
> >diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.h
> >b/drivers/gpu/drm/i915/display/intel_cdclk.h
> >index 4d6f7f5f8930..cefb5146ddca 100644
> >--- a/drivers/gpu/drm/i915/display/intel_cdclk.h
> >+++ b/drivers/gpu/drm/i915/display/intel_cdclk.h
> >@@ -15,6 +15,9 @@ struct intel_atomic_state;  struct intel_cdclk_state;  struct
> >intel_crtc_state;
> >
> >+#define WIDTH_4K  3860
> >+#define HEIGHT_4K 2160
> >+
> > int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state);  void
> >intel_cdclk_init(struct drm_i915_private *i915);  void intel_cdclk_uninit(struct
> >drm_i915_private *i915);
> >--
> >2.17.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2019-08-20 13:43 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-20 11:06 [PATCH] drm/i915/tgl: Lower cdclk for sub 4k resolutions Mika Kahola
2019-08-20 13:03 ` Ville Syrjälä
2019-08-20 13:22   ` Kahola, Mika
2019-08-20 13:44     ` Ville Syrjälä
2019-08-20 13:35 ` Shankar, Uma
2019-08-20 13:43   ` Ville Syrjälä [this message]
2019-08-20 15:06     ` Shankar, Uma
2019-08-21  6:18   ` Kahola, Mika
2019-08-20 16:28 ` ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2019-08-20 16:29 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-08-20 17:51 ` ✓ Fi.CI.BAT: success " Patchwork
2019-08-21  5:29 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190820134313.GC5942@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=uma.shankar@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.