All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch,
	davem@davemloft.net, vinicius.gomes@intel.com,
	vedang.patel@intel.com, richardcochran@gmail.com
Cc: weifeng.voon@intel.com, jiri@mellanox.com, m-karicheri2@ti.com,
	Jose.Abreu@synopsys.com, ilias.apalodimas@linaro.org,
	jhs@mojatatu.com, xiyou.wangcong@gmail.com,
	kurt.kanzenbach@linutronix.de, netdev@vger.kernel.org,
	Vladimir Oltean <olteanv@gmail.com>
Subject: [PATCH v1 net-next 03/15] net: dsa: sja1105: Switch to hardware operations for PTP
Date: Mon,  2 Sep 2019 19:25:32 +0300	[thread overview]
Message-ID: <20190902162544.24613-4-olteanv@gmail.com> (raw)
In-Reply-To: <20190902162544.24613-1-olteanv@gmail.com>

Adjusting the hardware clock (PTPCLKVAL, PTPCLKADD, PTPCLKRATE) is a
requirement for the auxiliary PTP functionality of the switch
(TTEthernet, PPS input, PPS output).

Now that the sync precision issues have been identified (and fixed in
the spi-fsl-dspi driver), we can get rid of the timecounter/cyclecounter
implementation, which is reliant on the free-running PTPTSCLK.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
---
Changes since RFC:
- None.

 drivers/net/dsa/sja1105/sja1105.h      |  16 +--
 drivers/net/dsa/sja1105/sja1105_main.c |  18 ++-
 drivers/net/dsa/sja1105/sja1105_ptp.c  | 181 ++++++++++++-------------
 drivers/net/dsa/sja1105/sja1105_ptp.h  |  22 +++
 drivers/net/dsa/sja1105/sja1105_spi.c  |   2 -
 5 files changed, 122 insertions(+), 117 deletions(-)

diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h
index d8a92646e80a..e4955a025e46 100644
--- a/drivers/net/dsa/sja1105/sja1105.h
+++ b/drivers/net/dsa/sja1105/sja1105.h
@@ -32,7 +32,6 @@ struct sja1105_regs {
 	u64 ptp_control;
 	u64 ptpclk;
 	u64 ptpclkrate;
-	u64 ptptsclk;
 	u64 ptpegr_ts[SJA1105_NUM_PORTS];
 	u64 pad_mii_tx[SJA1105_NUM_PORTS];
 	u64 pad_mii_id[SJA1105_NUM_PORTS];
@@ -50,8 +49,15 @@ struct sja1105_regs {
 	u64 qlevel[SJA1105_NUM_PORTS];
 };
 
+enum sja1105_ptp_clk_mode {
+	PTP_ADD_MODE = 1,
+	PTP_SET_MODE = 0,
+};
+
 struct sja1105_ptp_cmd {
 	u64 resptp;		/* reset */
+	u64 corrclk4ts;		/* use the corrected clock for timestamps */
+	u64 ptpclkadd;		/* enum sja1105_ptp_clk_mode */
 };
 
 struct sja1105_info {
@@ -96,13 +102,7 @@ struct sja1105_private {
 	struct sja1105_ptp_cmd ptp_cmd;
 	struct ptp_clock_info ptp_caps;
 	struct ptp_clock *clock;
-	/* The cycle counter translates the PTP timestamps (based on
-	 * a free-running counter) into a software time domain.
-	 */
-	struct cyclecounter tstamp_cc;
-	struct timecounter tstamp_tc;
-	struct delayed_work refresh_work;
-	/* Serializes all operations on the cycle counter */
+	/* Serializes all operations on the PTP hardware clock */
 	struct mutex ptp_lock;
 	/* Serializes transmission of management frames so that
 	 * the switch doesn't confuse them with one another.
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index d8cff0107ec4..630f7e337fe9 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1813,7 +1813,7 @@ static netdev_tx_t sja1105_port_deferred_xmit(struct dsa_switch *ds, int port,
 	struct skb_shared_hwtstamps shwt = {0};
 	int slot = sp->mgmt_slot;
 	struct sk_buff *clone;
-	u64 now, ts;
+	u64 ticks, ts;
 	int rc;
 
 	/* The tragic fact about the switch having 4x2 slots for installing
@@ -1844,7 +1844,7 @@ static netdev_tx_t sja1105_port_deferred_xmit(struct dsa_switch *ds, int port,
 
 	mutex_lock(&priv->ptp_lock);
 
-	now = priv->tstamp_cc.read(&priv->tstamp_cc);
+	ticks = sja1105_ptpclkval_read(priv);
 
 	rc = sja1105_ptpegr_ts_poll(priv, slot, &ts);
 	if (rc < 0) {
@@ -1853,10 +1853,9 @@ static netdev_tx_t sja1105_port_deferred_xmit(struct dsa_switch *ds, int port,
 		goto out_unlock_ptp;
 	}
 
-	ts = sja1105_tstamp_reconstruct(priv, now, ts);
-	ts = timecounter_cyc2time(&priv->tstamp_tc, ts);
+	ts = sja1105_tstamp_reconstruct(priv, ticks, ts);
 
-	shwt.hwtstamp = ns_to_ktime(ts);
+	shwt.hwtstamp = ns_to_ktime(sja1105_ticks_to_ns(ts));
 	skb_complete_tx_timestamp(clone, &shwt);
 
 out_unlock_ptp:
@@ -1994,11 +1993,11 @@ static void sja1105_rxtstamp_work(struct work_struct *work)
 	struct sja1105_tagger_data *data = to_tagger(work);
 	struct sja1105_private *priv = to_sja1105(data);
 	struct sk_buff *skb;
-	u64 now;
+	u64 ticks;
 
 	mutex_lock(&priv->ptp_lock);
 
-	now = priv->tstamp_cc.read(&priv->tstamp_cc);
+	ticks = sja1105_ptpclkval_read(priv);
 
 	while ((skb = skb_dequeue(&data->skb_rxtstamp_queue)) != NULL) {
 		struct skb_shared_hwtstamps *shwt = skb_hwtstamps(skb);
@@ -2007,10 +2006,9 @@ static void sja1105_rxtstamp_work(struct work_struct *work)
 		*shwt = (struct skb_shared_hwtstamps) {0};
 
 		ts = SJA1105_SKB_CB(skb)->meta_tstamp;
-		ts = sja1105_tstamp_reconstruct(priv, now, ts);
-		ts = timecounter_cyc2time(&priv->tstamp_tc, ts);
+		ts = sja1105_tstamp_reconstruct(priv, ticks, ts);
 
-		shwt->hwtstamp = ns_to_ktime(ts);
+		shwt->hwtstamp = ns_to_ktime(sja1105_ticks_to_ns(ts));
 		netif_rx_ni(skb);
 	}
 
diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c
index 13f9f5799e46..bcdfdda46b9c 100644
--- a/drivers/net/dsa/sja1105/sja1105_ptp.c
+++ b/drivers/net/dsa/sja1105/sja1105_ptp.c
@@ -13,24 +13,6 @@
 #define SJA1105_MAX_ADJ_PPB		32000000
 #define SJA1105_SIZE_PTP_CMD		4
 
-/* Timestamps are in units of 8 ns clock ticks (equivalent to a fixed
- * 125 MHz clock) so the scale factor (MULT / SHIFT) needs to be 8.
- * Furthermore, wisely pick SHIFT as 28 bits, which translates
- * MULT into 2^31 (0x80000000).  This is the same value around which
- * the hardware PTPCLKRATE is centered, so the same ppb conversion
- * arithmetic can be reused.
- */
-#define SJA1105_CC_SHIFT		28
-#define SJA1105_CC_MULT			(8 << SJA1105_CC_SHIFT)
-
-/* Having 33 bits of cycle counter left until a 64-bit overflow during delta
- * conversion, we multiply this by the 8 ns counter resolution and arrive at
- * a comfortable 68.71 second refresh interval until the delta would cause
- * an integer overflow, in absence of any other readout.
- * Approximate to 1 minute.
- */
-#define SJA1105_REFRESH_INTERVAL	(HZ * 60)
-
 /*            This range is actually +/- SJA1105_MAX_ADJ_PPB
  *            divided by 1000 (ppb -> ppm) and with a 16-bit
  *            "fractional" part (actually fixed point).
@@ -41,7 +23,7 @@
  *
  * This forgoes a "ppb" numeric representation (up to NSEC_PER_SEC)
  * and defines the scaling factor between scaled_ppm and the actual
- * frequency adjustments (both cycle counter and hardware).
+ * frequency adjustments of the PHC.
  *
  *   ptpclkrate = scaled_ppm * 2^31 / (10^6 * 2^16)
  *   simplifies to
@@ -49,10 +31,9 @@
  */
 #define SJA1105_CC_MULT_NUM		(1 << 9)
 #define SJA1105_CC_MULT_DEM		15625
+#define SJA1105_CC_MULT			0x80000000
 
 #define ptp_to_sja1105(d) container_of((d), struct sja1105_private, ptp_caps)
-#define cc_to_sja1105(d) container_of((d), struct sja1105_private, tstamp_cc)
-#define dw_to_sja1105(d) container_of((d), struct sja1105_private, refresh_work)
 
 int sja1105_get_ts_info(struct dsa_switch *ds, int port,
 			struct ethtool_ts_info *info)
@@ -86,6 +67,8 @@ int sja1105et_ptp_cmd(const void *ctx, const void *data)
 
 	sja1105_pack(buf, &valid,           31, 31, size);
 	sja1105_pack(buf, &cmd->resptp,      2,  2, size);
+	sja1105_pack(buf, &cmd->corrclk4ts,  1,  1, size);
+	sja1105_pack(buf, &cmd->ptpclkadd,   0,  0, size);
 
 	return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->ptp_control,
 					   buf, SJA1105_SIZE_PTP_CMD);
@@ -103,6 +86,8 @@ int sja1105pqrs_ptp_cmd(const void *ctx, const void *data)
 
 	sja1105_pack(buf, &valid,           31, 31, size);
 	sja1105_pack(buf, &cmd->resptp,      3,  3, size);
+	sja1105_pack(buf, &cmd->corrclk4ts,  2,  2, size);
+	sja1105_pack(buf, &cmd->ptpclkadd,   0,  0, size);
 
 	return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->ptp_control,
 					   buf, SJA1105_SIZE_PTP_CMD);
@@ -215,17 +200,14 @@ int sja1105_ptpegr_ts_poll(struct sja1105_private *priv, int port, u64 *ts)
 int sja1105_ptp_reset(struct sja1105_private *priv)
 {
 	struct sja1105_ptp_cmd cmd = priv->ptp_cmd;
-	struct dsa_switch *ds = priv->ds;
 	int rc;
 
 	mutex_lock(&priv->ptp_lock);
 
 	cmd.resptp = 1;
-	dev_dbg(ds->dev, "Resetting PTP clock\n");
-	rc = priv->info->ptp_cmd(priv, &cmd);
 
-	timecounter_init(&priv->tstamp_tc, &priv->tstamp_cc,
-			 ktime_to_ns(ktime_get_real()));
+	dev_dbg(priv->ds->dev, "Resetting PTP clock\n");
+	rc = priv->info->ptp_cmd(priv, &cmd);
 
 	mutex_unlock(&priv->ptp_lock);
 
@@ -236,124 +218,130 @@ static int sja1105_ptp_gettime(struct ptp_clock_info *ptp,
 			       struct timespec64 *ts)
 {
 	struct sja1105_private *priv = ptp_to_sja1105(ptp);
-	u64 ns;
+	u64 ticks;
 
 	mutex_lock(&priv->ptp_lock);
-	ns = timecounter_read(&priv->tstamp_tc);
-	mutex_unlock(&priv->ptp_lock);
 
-	*ts = ns_to_timespec64(ns);
+	ticks = sja1105_ptpclkval_read(priv);
+	*ts = ns_to_timespec64(sja1105_ticks_to_ns(ticks));
+
+	mutex_unlock(&priv->ptp_lock);
 
 	return 0;
 }
 
+/* Caller must hold priv->ptp_lock */
+static int sja1105_ptp_mode_set(struct sja1105_private *priv,
+				enum sja1105_ptp_clk_mode mode)
+{
+	if (priv->ptp_cmd.ptpclkadd == mode)
+		return 0;
+
+	priv->ptp_cmd.ptpclkadd = mode;
+
+	return priv->info->ptp_cmd(priv, &priv->ptp_cmd);
+}
+
+/* Caller must hold priv->ptp_lock */
+static int sja1105_ptpclkval_write(struct sja1105_private *priv, u64 val)
+{
+	const struct sja1105_regs *regs = priv->info->regs;
+
+	return sja1105_spi_send_int(priv, SPI_WRITE, regs->ptpclk, &val, 8);
+}
+
+/* Write to PTPCLKVAL while PTPCLKADD is 0 */
 static int sja1105_ptp_settime(struct ptp_clock_info *ptp,
 			       const struct timespec64 *ts)
 {
+	u64 ticks = ns_to_sja1105_ticks(timespec64_to_ns(ts));
 	struct sja1105_private *priv = ptp_to_sja1105(ptp);
-	u64 ns = timespec64_to_ns(ts);
+	int rc;
 
 	mutex_lock(&priv->ptp_lock);
-	timecounter_init(&priv->tstamp_tc, &priv->tstamp_cc, ns);
+
+	rc = sja1105_ptp_mode_set(priv, PTP_SET_MODE);
+	if (rc < 0) {
+		dev_err(priv->ds->dev, "Failed to put PTPCLK in set mode\n");
+		goto out;
+	}
+
+	rc = sja1105_ptpclkval_write(priv, ticks);
+
+out:
 	mutex_unlock(&priv->ptp_lock);
 
-	return 0;
+	return rc;
 }
 
 static int sja1105_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
 {
 	struct sja1105_private *priv = ptp_to_sja1105(ptp);
+	const struct sja1105_regs *regs = priv->info->regs;
 	s64 clkrate;
+	int rc;
 
 	clkrate = (s64)scaled_ppm * SJA1105_CC_MULT_NUM;
 	clkrate = div_s64(clkrate, SJA1105_CC_MULT_DEM);
 
-	mutex_lock(&priv->ptp_lock);
-
-	/* Force a readout to update the timer *before* changing its frequency.
-	 *
-	 * This way, its corrected time curve can at all times be modeled
-	 * as a linear "A * x + B" function, where:
-	 *
-	 * - B are past frequency adjustments and offset shifts, all
-	 *   accumulated into the cycle_last variable.
-	 *
-	 * - A is the new frequency adjustments we're just about to set.
-	 *
-	 * Reading now makes B accumulate the correct amount of time,
-	 * corrected at the old rate, before changing it.
-	 *
-	 * Hardware timestamps then become simple points on the curve and
-	 * are approximated using the above function.  This is still better
-	 * than letting the switch take the timestamps using the hardware
-	 * rate-corrected clock (PTPCLKVAL) - the comparison in this case would
-	 * be that we're shifting the ruler at the same time as we're taking
-	 * measurements with it.
-	 *
-	 * The disadvantage is that it's possible to receive timestamps when
-	 * a frequency adjustment took place in the near past.
-	 * In this case they will be approximated using the new ppb value
-	 * instead of a compound function made of two segments (one at the old
-	 * and the other at the new rate) - introducing some inaccuracy.
-	 */
-	timecounter_read(&priv->tstamp_tc);
-
-	priv->tstamp_cc.mult = SJA1105_CC_MULT + clkrate;
+	/* Take a +/- value and re-center it around 2^31. */
+	clkrate = SJA1105_CC_MULT + clkrate;
+	clkrate &= GENMASK_ULL(31, 0);
 
-	mutex_unlock(&priv->ptp_lock);
-
-	return 0;
-}
+	mutex_lock(&priv->ptp_lock);
 
-static int sja1105_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
-{
-	struct sja1105_private *priv = ptp_to_sja1105(ptp);
+	rc = sja1105_spi_send_int(priv, SPI_WRITE, regs->ptpclkrate,
+				  &clkrate, 4);
 
-	mutex_lock(&priv->ptp_lock);
-	timecounter_adjtime(&priv->tstamp_tc, delta);
 	mutex_unlock(&priv->ptp_lock);
 
-	return 0;
+	return rc;
 }
 
-static u64 sja1105_ptptsclk_read(const struct cyclecounter *cc)
+/* Caller must hold priv->ptp_lock */
+u64 sja1105_ptpclkval_read(struct sja1105_private *priv)
 {
-	struct sja1105_private *priv = cc_to_sja1105(cc);
 	const struct sja1105_regs *regs = priv->info->regs;
-	u64 ptptsclk = 0;
+	u64 ptpclkval = 0;
 	int rc;
 
-	rc = sja1105_spi_send_int(priv, SPI_READ, regs->ptptsclk,
-				  &ptptsclk, 8);
+	rc = sja1105_spi_send_int(priv, SPI_READ, regs->ptpclk,
+				  &ptpclkval, 8);
 	if (rc < 0)
 		dev_err_ratelimited(priv->ds->dev,
-				    "failed to read ptp cycle counter: %d\n",
+				    "failed to read ptp time: %d\n",
 				    rc);
-	return ptptsclk;
+
+	return ptpclkval;
 }
 
-static void sja1105_ptp_overflow_check(struct work_struct *work)
+/* Write to PTPCLKVAL while PTPCLKADD is 1 */
+static int sja1105_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
 {
-	struct delayed_work *dw = to_delayed_work(work);
-	struct sja1105_private *priv = dw_to_sja1105(dw);
-	struct timespec64 ts;
+	struct sja1105_private *priv = ptp_to_sja1105(ptp);
+	s64 ticks = ns_to_sja1105_ticks(delta);
+	int rc;
 
-	sja1105_ptp_gettime(&priv->ptp_caps, &ts);
+	mutex_lock(&priv->ptp_lock);
 
-	schedule_delayed_work(&priv->refresh_work, SJA1105_REFRESH_INTERVAL);
+	rc = sja1105_ptp_mode_set(priv, PTP_ADD_MODE);
+	if (rc < 0) {
+		dev_err(priv->ds->dev, "Failed to put PTPCLK in add mode\n");
+		goto out;
+	}
+
+	rc = sja1105_ptpclkval_write(priv, ticks);
+
+out:
+	mutex_unlock(&priv->ptp_lock);
+
+	return rc;
 }
 
 int sja1105_ptp_clock_register(struct sja1105_private *priv)
 {
 	struct dsa_switch *ds = priv->ds;
 
-	/* Set up the cycle counter */
-	priv->tstamp_cc = (struct cyclecounter) {
-		.read		= sja1105_ptptsclk_read,
-		.mask		= CYCLECOUNTER_MASK(64),
-		.shift		= SJA1105_CC_SHIFT,
-		.mult		= SJA1105_CC_MULT,
-	};
 	priv->ptp_caps = (struct ptp_clock_info) {
 		.owner		= THIS_MODULE,
 		.name		= "SJA1105 PHC",
@@ -370,8 +358,8 @@ int sja1105_ptp_clock_register(struct sja1105_private *priv)
 	if (IS_ERR_OR_NULL(priv->clock))
 		return PTR_ERR(priv->clock);
 
-	INIT_DELAYED_WORK(&priv->refresh_work, sja1105_ptp_overflow_check);
-	schedule_delayed_work(&priv->refresh_work, SJA1105_REFRESH_INTERVAL);
+	priv->ptp_cmd.corrclk4ts = true;
+	priv->ptp_cmd.ptpclkadd = PTP_SET_MODE;
 
 	return sja1105_ptp_reset(priv);
 }
@@ -381,7 +369,6 @@ void sja1105_ptp_clock_unregister(struct sja1105_private *priv)
 	if (IS_ERR_OR_NULL(priv->clock))
 		return;
 
-	cancel_delayed_work_sync(&priv->refresh_work);
 	ptp_clock_unregister(priv->clock);
 	priv->clock = NULL;
 }
diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.h b/drivers/net/dsa/sja1105/sja1105_ptp.h
index af456b0a4d27..51e21d951548 100644
--- a/drivers/net/dsa/sja1105/sja1105_ptp.h
+++ b/drivers/net/dsa/sja1105/sja1105_ptp.h
@@ -4,6 +4,21 @@
 #ifndef _SJA1105_PTP_H
 #define _SJA1105_PTP_H
 
+/* Timestamps are in units of 8 ns clock ticks (equivalent to
+ * a fixed 125 MHz clock).
+ */
+#define SJA1105_TICK_NS			8
+
+static inline s64 ns_to_sja1105_ticks(s64 ns)
+{
+	return ns / SJA1105_TICK_NS;
+}
+
+static inline s64 sja1105_ticks_to_ns(s64 ticks)
+{
+	return ticks * SJA1105_TICK_NS;
+}
+
 #if IS_ENABLED(CONFIG_NET_DSA_SJA1105_PTP)
 
 int sja1105_ptp_clock_register(struct sja1105_private *priv);
@@ -24,6 +39,8 @@ u64 sja1105_tstamp_reconstruct(struct sja1105_private *priv, u64 now,
 
 int sja1105_ptp_reset(struct sja1105_private *priv);
 
+u64 sja1105_ptpclkval_read(struct sja1105_private *priv);
+
 #else
 
 static inline int sja1105_ptp_clock_register(struct sja1105_private *priv)
@@ -53,6 +70,11 @@ static inline int sja1105_ptp_reset(struct sja1105_private *priv)
 	return 0;
 }
 
+static inline u64 sja1105_ptpclkval_read(struct sja1105_private *priv)
+{
+	return 0;
+}
+
 #define sja1105et_ptp_cmd NULL
 
 #define sja1105pqrs_ptp_cmd NULL
diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c
index 84dc603138cf..1953d8c54af6 100644
--- a/drivers/net/dsa/sja1105/sja1105_spi.c
+++ b/drivers/net/dsa/sja1105/sja1105_spi.c
@@ -517,7 +517,6 @@ static struct sja1105_regs sja1105et_regs = {
 	.ptp_control = 0x17,
 	.ptpclk = 0x18, /* Spans 0x18 to 0x19 */
 	.ptpclkrate = 0x1A,
-	.ptptsclk = 0x1B, /* Spans 0x1B to 0x1C */
 };
 
 static struct sja1105_regs sja1105pqrs_regs = {
@@ -548,7 +547,6 @@ static struct sja1105_regs sja1105pqrs_regs = {
 	.ptp_control = 0x18,
 	.ptpclk = 0x19,
 	.ptpclkrate = 0x1B,
-	.ptptsclk = 0x1C,
 };
 
 struct sja1105_info sja1105e_info = {
-- 
2.17.1


  parent reply	other threads:[~2019-09-02 16:26 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-02 16:25 [PATCH v1 net-next 00/15] tc-taprio offload for SJA1105 DSA Vladimir Oltean
2019-09-02 16:25 ` [PATCH v1 net-next 01/15] net: dsa: sja1105: Change the PTP command access pattern Vladimir Oltean
2019-09-02 16:25 ` [PATCH v1 net-next 02/15] net: dsa: sja1105: Get rid of global declaration of struct ptp_clock_info Vladimir Oltean
2019-09-02 16:25 ` Vladimir Oltean [this message]
2019-09-02 16:25 ` [PATCH v1 net-next 04/15] net: dsa: sja1105: Implement the .gettimex64 system call for PTP Vladimir Oltean
2019-09-02 16:25 ` [PATCH v1 net-next 05/15] net: dsa: sja1105: Restore PTP time after switch reset Vladimir Oltean
2019-09-02 16:25 ` [PATCH v1 net-next 06/15] net: dsa: sja1105: Disallow management xmit during " Vladimir Oltean
2019-09-02 16:25 ` [PATCH v1 net-next 07/15] net: dsa: sja1105: Move PTP data to its own private structure Vladimir Oltean
2019-09-02 16:25 ` [PATCH v1 net-next 08/15] net: dsa: sja1105: Advertise the 8 TX queues Vladimir Oltean
2019-09-02 16:25 ` [PATCH v1 net-next 09/15] taprio: Add support for hardware offloading Vladimir Oltean
2019-09-02 16:25 ` [PATCH v1 net-next 10/15] net: dsa: Pass ndo_setup_tc slave callback to drivers Vladimir Oltean
2019-09-04  7:50   ` Kurt Kanzenbach
2019-09-02 16:25 ` [PATCH v1 net-next 11/15] net: dsa: sja1105: Add static config tables for scheduling Vladimir Oltean
2019-09-02 16:25 ` [PATCH v1 net-next 12/15] net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offload Vladimir Oltean
2019-09-11 19:45   ` Vinicius Costa Gomes
2019-09-12  1:30     ` Vladimir Oltean
2019-09-02 16:25 ` [PATCH v1 net-next 13/15] net: dsa: sja1105: Make HOSTPRIO a kernel config Vladimir Oltean
2019-09-02 16:25 ` [PATCH v1 net-next 14/15] net: dsa: sja1105: Make the PTP command read-write Vladimir Oltean
2019-09-02 16:25 ` [PATCH v1 net-next 15/15] net: dsa: sja1105: Implement state machine for TAS with PTP clock source Vladimir Oltean
2019-09-11 19:43   ` Vinicius Costa Gomes
2019-09-06 12:54 ` [PATCH v1 net-next 00/15] tc-taprio offload for SJA1105 DSA David Miller
2019-09-07 14:45   ` Andrew Lunn
2019-09-08 11:07     ` Vladimir Oltean
2019-09-08 20:42       ` Andrew Lunn
2019-09-09  6:52         ` Richard Cochran
2019-09-09 12:36         ` Joergen Andreasen
2019-09-10  1:46           ` Vladimir Oltean
2019-09-09  7:04       ` Richard Cochran
2019-09-07 13:55 ` David Miller
2019-09-09 23:49   ` Gomes, Vinicius
2019-09-10  1:06     ` Vladimir Oltean
2019-09-11  0:45       ` Gomes, Vinicius
2019-09-11 11:51         ` Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190902162544.24613-4-olteanv@gmail.com \
    --to=olteanv@gmail.com \
    --cc=Jose.Abreu@synopsys.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=jhs@mojatatu.com \
    --cc=jiri@mellanox.com \
    --cc=kurt.kanzenbach@linutronix.de \
    --cc=m-karicheri2@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    --cc=vedang.patel@intel.com \
    --cc=vinicius.gomes@intel.com \
    --cc=vivien.didelot@gmail.com \
    --cc=weifeng.voon@intel.com \
    --cc=xiyou.wangcong@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.