All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oliver O'Halloran <oohall@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: sbobroff@linux.ibm.com, Oliver O'Halloran <oohall@gmail.com>
Subject: [PATCH 08/14] pci-hotplug/pnv_php: Add a reset_slot() callback
Date: Tue,  3 Sep 2019 20:15:59 +1000	[thread overview]
Message-ID: <20190903101605.2890-9-oohall@gmail.com> (raw)
In-Reply-To: <20190903101605.2890-1-oohall@gmail.com>

When performing EEH recovery of devices in a hotplug slot we need to use
the slot driver's ->reset_slot() callback to prevent spurious hotplug
events due to spurious DLActive and PresDet change interrupts. Add a
reset_slot() callback to pnv_php so we can handle recovery of devices
in pnv_php managed slots.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
---
 drivers/pci/hotplug/pnv_php.c | 39 +++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/pci/hotplug/pnv_php.c b/drivers/pci/hotplug/pnv_php.c
index 6758fd7c382e..b0e243dabf77 100644
--- a/drivers/pci/hotplug/pnv_php.c
+++ b/drivers/pci/hotplug/pnv_php.c
@@ -511,6 +511,37 @@ static int pnv_php_enable(struct pnv_php_slot *php_slot, bool rescan)
 	return 0;
 }
 
+static int pnv_php_reset_slot(struct hotplug_slot *slot, int probe)
+{
+	struct pnv_php_slot *php_slot = to_pnv_php_slot(slot);
+	struct pci_dev *bridge = php_slot->pdev;
+	uint16_t sts;
+
+	/*
+	 * The CAPI folks want pnv_php to drive OpenCAPI slots
+	 * which don't have a bridge. Only claim to support
+	 * reset_slot() if we have a bridge device (for now...)
+	 */
+	if (probe)
+		return !bridge;
+
+	/* mask our interrupt while resetting the bridge */
+	if (php_slot->irq > 0)
+		disable_irq(php_slot->irq);
+
+	pci_bridge_secondary_bus_reset(bridge);
+
+	/* clear any state changes that happened due to the reset */
+	pcie_capability_read_word(php_slot->pdev, PCI_EXP_SLTSTA, &sts);
+	sts &= (PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC);
+	pcie_capability_write_word(php_slot->pdev, PCI_EXP_SLTSTA, sts);
+
+	if (php_slot->irq > 0)
+		enable_irq(php_slot->irq);
+
+	return 0;
+}
+
 static int pnv_php_enable_slot(struct hotplug_slot *slot)
 {
 	struct pnv_php_slot *php_slot = to_pnv_php_slot(slot);
@@ -548,6 +579,7 @@ static const struct hotplug_slot_ops php_slot_ops = {
 	.set_attention_status	= pnv_php_set_attention_state,
 	.enable_slot		= pnv_php_enable_slot,
 	.disable_slot		= pnv_php_disable_slot,
+	.reset_slot		= pnv_php_reset_slot,
 };
 
 static void pnv_php_release(struct pnv_php_slot *php_slot)
@@ -721,6 +753,12 @@ static irqreturn_t pnv_php_interrupt(int irq, void *data)
 	pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &sts);
 	sts &= (PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC);
 	pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, sts);
+
+	pci_dbg(pdev, "PCI slot [%s]: HP int! DLAct: %d, PresDet: %d\n",
+			php_slot->name,
+			!!(sts & PCI_EXP_SLTSTA_DLLSC),
+			!!(sts & PCI_EXP_SLTSTA_PDC));
+
 	if (sts & PCI_EXP_SLTSTA_DLLSC) {
 		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lsts);
 		added = !!(lsts & PCI_EXP_LNKSTA_DLLLA);
@@ -735,6 +773,7 @@ static irqreturn_t pnv_php_interrupt(int irq, void *data)
 
 		added = !!(presence == OPAL_PCI_SLOT_PRESENT);
 	} else {
+		pci_dbg(pdev, "PCI slot [%s]: Spurious IRQ?\n", php_slot->name);
 		return IRQ_NONE;
 	}
 
-- 
2.21.0


  parent reply	other threads:[~2019-09-03 10:38 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-03 10:15 EEH + hotplug fixes Oliver O'Halloran
2019-09-03 10:15 ` [PATCH 01/14] powerpc/eeh: Clean up EEH PEs after recovery finishes Oliver O'Halloran
2019-09-17  0:43   ` Sam Bobroff
2019-09-19 10:25   ` Michael Ellerman
2019-09-03 10:15 ` [PATCH 02/14] powerpc/eeh: Fix race when freeing PDNs Oliver O'Halloran
2019-09-17  0:50   ` Sam Bobroff
2019-09-03 10:15 ` [PATCH 03/14] powerpc/eeh: Make permanently failed devices non-actionable Oliver O'Halloran
2019-09-17  0:51   ` Sam Bobroff
2019-09-03 10:15 ` [PATCH 04/14] powerpc/eeh: Check slot presence state in eeh_handle_normal_event() Oliver O'Halloran
2019-09-17  1:00   ` Sam Bobroff
2019-09-17  4:20     ` Oliver O'Halloran
2019-09-03 10:15 ` [PATCH 05/14] powerpc/eeh: Defer printing stack trace Oliver O'Halloran
2019-09-17  1:04   ` Sam Bobroff
2019-09-17  1:45     ` Oliver O'Halloran
2019-09-17  3:35       ` Sam Bobroff
2019-09-17  3:38         ` Oliver O'Halloran
2019-09-03 10:15 ` [PATCH 06/14] powerpc/eeh: Remove stale CAPI comment Oliver O'Halloran
2019-09-03 14:09   ` Andrew Donnellan
2019-09-17  1:04   ` Sam Bobroff
2019-09-03 10:15 ` [PATCH 07/14] powernv/eeh: Use generic code to handle hot resets Oliver O'Halloran
2019-09-17  1:15   ` Sam Bobroff
2019-09-17  7:30     ` Oliver O'Halloran
2019-09-03 10:15 ` Oliver O'Halloran [this message]
2019-09-03 10:16 ` [PATCH 09/14] pci-hotplug/pnv_php: Add support for IODA3 Power9 PHBs Oliver O'Halloran
2019-09-03 10:16 ` [PATCH 10/14] pci-hotplug/pnv_php: Add attention indicator support Oliver O'Halloran
2019-09-03 10:16 ` [PATCH 11/14] powerpc/eeh: Set attention indicator while recovering Oliver O'Halloran
2019-09-17  1:23   ` Sam Bobroff
2019-09-03 10:16 ` [PATCH 12/14] powerpc/eeh: Add debugfs interface to run an EEH check Oliver O'Halloran
2019-09-17  3:15   ` Sam Bobroff
2019-09-17  3:36     ` Oliver O'Halloran
2019-09-17  4:23       ` Oliver O'Halloran
2019-09-03 10:16 ` [PATCH 13/14] powerpc/eeh: Add a eeh_dev_break debugfs interface Oliver O'Halloran
2019-09-17  3:19   ` Sam Bobroff
2019-09-03 10:16 ` [PATCH 14/14] selftests/powerpc: Add basic EEH selftest Oliver O'Halloran

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190903101605.2890-9-oohall@gmail.com \
    --to=oohall@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=sbobroff@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.