From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 10/15] drm/i915: s/pipe_config/crtc_state/ in pfit functions
Date: Wed, 4 Sep 2019 19:26:20 +0300 [thread overview]
Message-ID: <20190904162625.15048-11-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20190904162625.15048-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Follow the new naming convention and call the crtc state
"crtc_state", and while at it drop the redundant crtc argument.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/display/icl_dsi.c | 3 +-
drivers/gpu/drm/i915/display/intel_dp.c | 7 +-
drivers/gpu/drm/i915/display/intel_hdmi.c | 5 +-
drivers/gpu/drm/i915/display/intel_lvds.c | 4 +-
drivers/gpu/drm/i915/display/intel_panel.c | 98 +++++++++++-----------
drivers/gpu/drm/i915/display/intel_panel.h | 6 +-
drivers/gpu/drm/i915/display/vlv_dsi.c | 5 +-
7 files changed, 60 insertions(+), 68 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 6e398c33a524..627cbd880224 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1265,7 +1265,6 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
base);
struct intel_connector *intel_connector = intel_dsi->attached_connector;
- struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
const struct drm_display_mode *fixed_mode =
intel_connector->panel.fixed_mode;
struct drm_display_mode *adjusted_mode =
@@ -1273,7 +1272,7 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
intel_fixed_panel_mode(fixed_mode, adjusted_mode);
- intel_pch_panel_fitting(crtc, pipe_config, conn_state->scaling_mode);
+ intel_pch_panel_fitting(pipe_config, conn_state->scaling_mode);
adjusted_mode->flags = 0;
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index d333f87d5b39..f6ef3c25c0ed 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2120,7 +2120,6 @@ intel_dp_ycbcr420_config(struct intel_dp *intel_dp,
const struct drm_display_info *info = &connector->display_info;
const struct drm_display_mode *adjusted_mode =
&crtc_state->base.adjusted_mode;
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
if (!drm_mode_is_420_only(info, adjusted_mode) ||
!intel_dp_get_colorimetry_status(intel_dp) ||
@@ -2129,7 +2128,7 @@ intel_dp_ycbcr420_config(struct intel_dp *intel_dp,
crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
- intel_pch_panel_fitting(crtc, crtc_state, DRM_MODE_SCALE_FULLSCREEN);
+ intel_pch_panel_fitting(crtc_state, DRM_MODE_SCALE_FULLSCREEN);
return 0;
}
@@ -2200,10 +2199,10 @@ intel_dp_compute_config(struct intel_encoder *encoder,
adjusted_mode);
if (HAS_GMCH(dev_priv))
- intel_gmch_panel_fitting(intel_crtc, pipe_config,
+ intel_gmch_panel_fitting(pipe_config,
conn_state->scaling_mode);
else
- intel_pch_panel_fitting(intel_crtc, pipe_config,
+ intel_pch_panel_fitting(pipe_config,
conn_state->scaling_mode);
}
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 4039c2216ae0..c749b04ba477 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -2267,8 +2267,6 @@ static bool
intel_hdmi_ycbcr420_config(struct drm_connector *connector,
struct intel_crtc_state *config)
{
- struct intel_crtc *intel_crtc = to_intel_crtc(config->base.crtc);
-
if (!connector->ycbcr_420_allowed) {
DRM_ERROR("Platform doesn't support YCBCR420 output\n");
return false;
@@ -2276,8 +2274,7 @@ intel_hdmi_ycbcr420_config(struct drm_connector *connector,
config->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
- intel_pch_panel_fitting(intel_crtc, config,
- DRM_MODE_SCALE_FULLSCREEN);
+ intel_pch_panel_fitting(config, DRM_MODE_SCALE_FULLSCREEN);
return true;
}
diff --git a/drivers/gpu/drm/i915/display/intel_lvds.c b/drivers/gpu/drm/i915/display/intel_lvds.c
index c786abdc3336..e983035aca63 100644
--- a/drivers/gpu/drm/i915/display/intel_lvds.c
+++ b/drivers/gpu/drm/i915/display/intel_lvds.c
@@ -430,10 +430,10 @@ static int intel_lvds_compute_config(struct intel_encoder *intel_encoder,
if (HAS_PCH_SPLIT(dev_priv)) {
pipe_config->has_pch_encoder = true;
- intel_pch_panel_fitting(intel_crtc, pipe_config,
+ intel_pch_panel_fitting(pipe_config,
conn_state->scaling_mode);
} else {
- intel_gmch_panel_fitting(intel_crtc, pipe_config,
+ intel_gmch_panel_fitting(pipe_config,
conn_state->scaling_mode);
}
diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
index 8f2e7750e8f4..6f4270ecdebd 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.c
+++ b/drivers/gpu/drm/i915/display/intel_panel.c
@@ -174,23 +174,23 @@ intel_panel_vbt_fixed_mode(struct intel_connector *connector)
/* adjusted_mode has been preset to be the panel's fixed mode */
void
-intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
- struct intel_crtc_state *pipe_config,
+intel_pch_panel_fitting(struct intel_crtc_state *crtc_state,
int fitting_mode)
{
- const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
+ const struct drm_display_mode *adjusted_mode =
+ &crtc_state->base.adjusted_mode;
int x, y, width, height;
/* Native modes don't need fitting */
- if (adjusted_mode->crtc_hdisplay == pipe_config->pipe_src_w &&
- adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h &&
- pipe_config->output_format != INTEL_OUTPUT_FORMAT_YCBCR420)
+ if (adjusted_mode->crtc_hdisplay == crtc_state->pipe_src_w &&
+ adjusted_mode->crtc_vdisplay == crtc_state->pipe_src_h &&
+ crtc_state->output_format != INTEL_OUTPUT_FORMAT_YCBCR420)
return;
switch (fitting_mode) {
case DRM_MODE_SCALE_CENTER:
- width = pipe_config->pipe_src_w;
- height = pipe_config->pipe_src_h;
+ width = crtc_state->pipe_src_w;
+ height = crtc_state->pipe_src_h;
x = (adjusted_mode->crtc_hdisplay - width + 1)/2;
y = (adjusted_mode->crtc_vdisplay - height + 1)/2;
break;
@@ -199,18 +199,18 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
/* Scale but preserve the aspect ratio */
{
u32 scaled_width = adjusted_mode->crtc_hdisplay
- * pipe_config->pipe_src_h;
- u32 scaled_height = pipe_config->pipe_src_w
+ * crtc_state->pipe_src_h;
+ u32 scaled_height = crtc_state->pipe_src_w
* adjusted_mode->crtc_vdisplay;
if (scaled_width > scaled_height) { /* pillar */
- width = scaled_height / pipe_config->pipe_src_h;
+ width = scaled_height / crtc_state->pipe_src_h;
if (width & 1)
width++;
x = (adjusted_mode->crtc_hdisplay - width + 1) / 2;
y = 0;
height = adjusted_mode->crtc_vdisplay;
} else if (scaled_width < scaled_height) { /* letter */
- height = scaled_width / pipe_config->pipe_src_w;
+ height = scaled_width / crtc_state->pipe_src_w;
if (height & 1)
height++;
y = (adjusted_mode->crtc_vdisplay - height + 1) / 2;
@@ -235,11 +235,11 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
return;
}
- pipe_config->pch_pfit.dst.x1 = x;
- pipe_config->pch_pfit.dst.y1 = y;
- pipe_config->pch_pfit.dst.x2 = x + width;
- pipe_config->pch_pfit.dst.y2 = y + height;
- pipe_config->pch_pfit.enabled = true;
+ crtc_state->pch_pfit.dst.x1 = x;
+ crtc_state->pch_pfit.dst.y1 = y;
+ crtc_state->pch_pfit.dst.x2 = x + width;
+ crtc_state->pch_pfit.dst.y2 = y + height;
+ crtc_state->pch_pfit.enabled = true;
}
static void
@@ -298,13 +298,13 @@ static inline u32 panel_fitter_scaling(u32 source, u32 target)
return (FACTOR * ratio + FACTOR/2) / FACTOR;
}
-static void i965_scale_aspect(struct intel_crtc_state *pipe_config,
+static void i965_scale_aspect(struct intel_crtc_state *crtc_state,
u32 *pfit_control)
{
- const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
+ const struct drm_display_mode *adjusted_mode = &crtc_state->base.adjusted_mode;
u32 scaled_width = adjusted_mode->crtc_hdisplay *
- pipe_config->pipe_src_h;
- u32 scaled_height = pipe_config->pipe_src_w *
+ crtc_state->pipe_src_h;
+ u32 scaled_height = crtc_state->pipe_src_w *
adjusted_mode->crtc_vdisplay;
/* 965+ is easy, it does everything in hw */
@@ -314,18 +314,18 @@ static void i965_scale_aspect(struct intel_crtc_state *pipe_config,
else if (scaled_width < scaled_height)
*pfit_control |= PFIT_ENABLE |
PFIT_SCALING_LETTER;
- else if (adjusted_mode->crtc_hdisplay != pipe_config->pipe_src_w)
+ else if (adjusted_mode->crtc_hdisplay != crtc_state->pipe_src_w)
*pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
}
-static void i9xx_scale_aspect(struct intel_crtc_state *pipe_config,
+static void i9xx_scale_aspect(struct intel_crtc_state *crtc_state,
u32 *pfit_control, u32 *pfit_pgm_ratios,
u32 *border)
{
- struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
+ struct drm_display_mode *adjusted_mode = &crtc_state->base.adjusted_mode;
u32 scaled_width = adjusted_mode->crtc_hdisplay *
- pipe_config->pipe_src_h;
- u32 scaled_height = pipe_config->pipe_src_w *
+ crtc_state->pipe_src_h;
+ u32 scaled_height = crtc_state->pipe_src_w *
adjusted_mode->crtc_vdisplay;
u32 bits;
@@ -337,11 +337,11 @@ static void i9xx_scale_aspect(struct intel_crtc_state *pipe_config,
if (scaled_width > scaled_height) { /* pillar */
centre_horizontally(adjusted_mode,
scaled_height /
- pipe_config->pipe_src_h);
+ crtc_state->pipe_src_h);
*border = LVDS_BORDER_ENABLE;
- if (pipe_config->pipe_src_h != adjusted_mode->crtc_vdisplay) {
- bits = panel_fitter_scaling(pipe_config->pipe_src_h,
+ if (crtc_state->pipe_src_h != adjusted_mode->crtc_vdisplay) {
+ bits = panel_fitter_scaling(crtc_state->pipe_src_h,
adjusted_mode->crtc_vdisplay);
*pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
@@ -353,11 +353,11 @@ static void i9xx_scale_aspect(struct intel_crtc_state *pipe_config,
} else if (scaled_width < scaled_height) { /* letter */
centre_vertically(adjusted_mode,
scaled_width /
- pipe_config->pipe_src_w);
+ crtc_state->pipe_src_w);
*border = LVDS_BORDER_ENABLE;
- if (pipe_config->pipe_src_w != adjusted_mode->crtc_hdisplay) {
- bits = panel_fitter_scaling(pipe_config->pipe_src_w,
+ if (crtc_state->pipe_src_w != adjusted_mode->crtc_hdisplay) {
+ bits = panel_fitter_scaling(crtc_state->pipe_src_w,
adjusted_mode->crtc_hdisplay);
*pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
@@ -375,17 +375,17 @@ static void i9xx_scale_aspect(struct intel_crtc_state *pipe_config,
}
}
-void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
- struct intel_crtc_state *pipe_config,
+void intel_gmch_panel_fitting(struct intel_crtc_state *crtc_state,
int fitting_mode)
{
- struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
- struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
+ struct drm_display_mode *adjusted_mode = &crtc_state->base.adjusted_mode;
/* Native modes don't need fitting */
- if (adjusted_mode->crtc_hdisplay == pipe_config->pipe_src_w &&
- adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h)
+ if (adjusted_mode->crtc_hdisplay == crtc_state->pipe_src_w &&
+ adjusted_mode->crtc_vdisplay == crtc_state->pipe_src_h)
goto out;
switch (fitting_mode) {
@@ -394,16 +394,16 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
* For centered modes, we have to calculate border widths &
* heights and modify the values programmed into the CRTC.
*/
- centre_horizontally(adjusted_mode, pipe_config->pipe_src_w);
- centre_vertically(adjusted_mode, pipe_config->pipe_src_h);
+ centre_horizontally(adjusted_mode, crtc_state->pipe_src_w);
+ centre_vertically(adjusted_mode, crtc_state->pipe_src_h);
border = LVDS_BORDER_ENABLE;
break;
case DRM_MODE_SCALE_ASPECT:
/* Scale but preserve the aspect ratio */
if (INTEL_GEN(dev_priv) >= 4)
- i965_scale_aspect(pipe_config, &pfit_control);
+ i965_scale_aspect(crtc_state, &pfit_control);
else
- i9xx_scale_aspect(pipe_config, &pfit_control,
+ i9xx_scale_aspect(crtc_state, &pfit_control,
&pfit_pgm_ratios, &border);
break;
case DRM_MODE_SCALE_FULLSCREEN:
@@ -411,8 +411,8 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
* Full scaling, even if it changes the aspect ratio.
* Fortunately this is all done for us in hw.
*/
- if (pipe_config->pipe_src_h != adjusted_mode->crtc_vdisplay ||
- pipe_config->pipe_src_w != adjusted_mode->crtc_hdisplay) {
+ if (crtc_state->pipe_src_h != adjusted_mode->crtc_vdisplay ||
+ crtc_state->pipe_src_w != adjusted_mode->crtc_hdisplay) {
pfit_control |= PFIT_ENABLE;
if (INTEL_GEN(dev_priv) >= 4)
pfit_control |= PFIT_SCALING_AUTO;
@@ -431,7 +431,7 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
/* 965+ wants fuzzy fitting */
/* FIXME: handle multiple panels by failing gracefully */
if (INTEL_GEN(dev_priv) >= 4)
- pfit_control |= PFIT_PIPE(intel_crtc->pipe) | PFIT_FILTER_FUZZY;
+ pfit_control |= PFIT_PIPE(crtc->pipe) | PFIT_FILTER_FUZZY;
out:
if ((pfit_control & PFIT_ENABLE) == 0) {
@@ -440,12 +440,12 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
}
/* Make sure pre-965 set dither correctly for 18bpp panels. */
- if (INTEL_GEN(dev_priv) < 4 && pipe_config->pipe_bpp == 18)
+ if (INTEL_GEN(dev_priv) < 4 && crtc_state->pipe_bpp == 18)
pfit_control |= PANEL_8TO6_DITHER_ENABLE;
- pipe_config->gmch_pfit.control = pfit_control;
- pipe_config->gmch_pfit.pgm_ratios = pfit_pgm_ratios;
- pipe_config->gmch_pfit.lvds_border_bits = border;
+ crtc_state->gmch_pfit.control = pfit_control;
+ crtc_state->gmch_pfit.pgm_ratios = pfit_pgm_ratios;
+ crtc_state->gmch_pfit.lvds_border_bits = border;
}
/**
diff --git a/drivers/gpu/drm/i915/display/intel_panel.h b/drivers/gpu/drm/i915/display/intel_panel.h
index cedeea443336..e1804e6e8325 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.h
+++ b/drivers/gpu/drm/i915/display/intel_panel.h
@@ -25,11 +25,9 @@ int intel_panel_init(struct intel_panel *panel,
void intel_panel_fini(struct intel_panel *panel);
void intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
struct drm_display_mode *adjusted_mode);
-void intel_pch_panel_fitting(struct intel_crtc *crtc,
- struct intel_crtc_state *pipe_config,
+void intel_pch_panel_fitting(struct intel_crtc_state *crtc_state,
int fitting_mode);
-void intel_gmch_panel_fitting(struct intel_crtc *crtc,
- struct intel_crtc_state *pipe_config,
+void intel_gmch_panel_fitting(struct intel_crtc_state *crtc_state,
int fitting_mode);
void intel_panel_set_backlight_acpi(const struct drm_connector_state *conn_state,
u32 level, u32 max);
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index 50064cde0724..6a20c4169a53 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -261,7 +261,6 @@ static int intel_dsi_compute_config(struct intel_encoder *encoder,
struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
base);
struct intel_connector *intel_connector = intel_dsi->attached_connector;
- struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
int ret;
@@ -273,10 +272,10 @@ static int intel_dsi_compute_config(struct intel_encoder *encoder,
intel_fixed_panel_mode(fixed_mode, adjusted_mode);
if (HAS_GMCH(dev_priv))
- intel_gmch_panel_fitting(crtc, pipe_config,
+ intel_gmch_panel_fitting(pipe_config,
conn_state->scaling_mode);
else
- intel_pch_panel_fitting(crtc, pipe_config,
+ intel_pch_panel_fitting(pipe_config,
conn_state->scaling_mode);
}
--
2.21.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-09-04 16:26 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-04 16:26 [PATCH 00/15] drm/i915: Expose margin connector properties for underscan Ville Syrjala
2019-09-04 16:26 ` [PATCH 01/15] drm/edid: Add drm_hdmi_avi_infoframe_bars() Ville Syrjala
2019-09-04 16:26 ` Ville Syrjala
2019-09-04 16:26 ` [PATCH 02/15] drm/i915: Parametrize PFIT_PIPE Ville Syrjala
2019-09-04 16:26 ` [PATCH 03/15] drm/i915: Replace some accidental I915_READ_FW()s with the normal version Ville Syrjala
2019-09-04 16:26 ` [PATCH 04/15] drm/i915: Fix skl+ non-scaled pfit modes Ville Syrjala
2019-09-04 16:26 ` [PATCH 05/15] drm/i915: Flatten a bunch of the pfit functions Ville Syrjala
2019-09-04 16:26 ` [PATCH 06/15] drm/i915: Use drm_rect to store the pfit window pos/size Ville Syrjala
2019-09-04 16:26 ` [PATCH 07/15] drm/i915: Check pipe source size against pfit limits Ville Syrjala
2019-09-05 10:37 ` [PATCH v2 " Ville Syrjala
2019-09-05 12:30 ` Ville Syrjälä
2019-09-04 16:26 ` [PATCH 08/15] drm/i915: Check pfit scaling factors Ville Syrjala
2019-09-05 10:37 ` [PATCH v2 " Ville Syrjala
2019-09-04 16:26 ` [PATCH 09/15] drm/i915: Check pfit minimum timings Ville Syrjala
2019-09-05 10:38 ` [PATCH v2 " Ville Syrjala
2019-09-04 16:26 ` Ville Syrjala [this message]
2019-09-04 16:26 ` [PATCH 11/15] drm/i915: Pass connector state to pfit calculations Ville Syrjala
2019-09-04 16:26 ` [PATCH 12/15] drm/i915: Have pfit calculations return an error code Ville Syrjala
2019-09-04 16:26 ` [PATCH 13/15] drm/i915: Expose margin properties on ilk+ HDMI Ville Syrjala
2019-09-04 16:26 ` [PATCH 14/15] drm/i915: Expose margin properties on ilk+ DP SST Ville Syrjala
2019-09-04 16:26 ` [PATCH 15/15] drm/i915: Expose margin properties on DP MST Ville Syrjala
2019-09-04 16:47 ` ✗ Fi.CI.SPARSE: warning for drm/i915: Expose margin connector properties for underscan Patchwork
2019-09-04 17:18 ` ✓ Fi.CI.BAT: success " Patchwork
2019-09-04 20:08 ` ✗ Fi.CI.IGT: failure " Patchwork
2019-09-05 11:06 ` ✗ Fi.CI.SPARSE: warning for drm/i915: Expose margin connector properties for underscan (rev4) Patchwork
2019-09-05 11:29 ` ✓ Fi.CI.BAT: success " Patchwork
2019-09-05 12:52 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190904162625.15048-11-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.