All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling
@ 2019-09-22 18:46 Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 002/185] ASoC: SOF: Intel: hda: Make hdac_device device-managed Sasha Levin
                   ` (183 more replies)
  0 siblings, 184 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Chris Wilson, Takashi Iwai, Sasha Levin

From: Chris Wilson <chris@chris-wilson.co.uk>

[ Upstream commit caa8422d01e983782548648e125fd617cadcec3f ]

I was looking at

<4> [241.835158] general protection fault: 0000 [#1] PREEMPT SMP PTI
<4> [241.835181] CPU: 1 PID: 214 Comm: kworker/1:3 Tainted: G     U            5.2.0-CI-CI_DRM_6509+ #1
<4> [241.835199] Hardware name: Dell Inc.                 OptiPlex 745                 /0GW726, BIOS 2.3.1  05/21/2007
<4> [241.835234] Workqueue: events snd_hdac_bus_process_unsol_events [snd_hda_core]
<4> [241.835256] RIP: 0010:input_handle_event+0x16d/0x5e0
<4> [241.835270] Code: 48 8b 93 58 01 00 00 8b 52 08 89 50 04 8b 83 f8 06 00 00 48 8b 93 00 07 00 00 8d 70 01 48 8d 04 c2 83 e1 08 89 b3 f8 06 00 00 <66> 89 28 66 44 89 60 02 44 89 68 04 8b 93 f8 06 00 00 0f 84 fd fe
<4> [241.835304] RSP: 0018:ffffc9000019fda0 EFLAGS: 00010046
<4> [241.835317] RAX: 6b6b6b6ec6c6c6c3 RBX: ffff8880290fefc8 RCX: 0000000000000000
<4> [241.835332] RDX: 000000006b6b6b6b RSI: 000000006b6b6b6c RDI: 0000000000000046
<4> [241.835347] RBP: 0000000000000005 R08: 0000000000000000 R09: 0000000000000001
<4> [241.835362] R10: ffffc9000019faa0 R11: 0000000000000000 R12: 0000000000000004
<4> [241.835377] R13: 0000000000000000 R14: ffff8880290ff1d0 R15: 0000000000000293
<4> [241.835392] FS:  0000000000000000(0000) GS:ffff88803de80000(0000) knlGS:0000000000000000
<4> [241.835409] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [241.835422] CR2: 00007ffe9a99e9b7 CR3: 000000002f588000 CR4: 00000000000006e0
<4> [241.835436] Call Trace:
<4> [241.835449]  input_event+0x45/0x70
<4> [241.835464]  snd_jack_report+0xdc/0x100
<4> [241.835490]  snd_hda_jack_report_sync+0x83/0xc0 [snd_hda_codec]
<4> [241.835512]  snd_hdac_bus_process_unsol_events+0x5a/0x70 [snd_hda_core]
<4> [241.835530]  process_one_work+0x245/0x610

which has the hallmarks of a worker queued from interrupt after it was
supposedly cancelled (note the POISON_FREE), and I could not see where
the interrupt would be flushed on shutdown so added the likely suspects.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111174
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/hdac_controller.c | 2 ++
 sound/pci/hda/hda_intel.c   | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c
index 812dc144fb5b2..2258804c58575 100644
--- a/sound/hda/hdac_controller.c
+++ b/sound/hda/hdac_controller.c
@@ -445,6 +445,8 @@ static void azx_int_disable(struct hdac_bus *bus)
 	list_for_each_entry(azx_dev, &bus->stream_list, list)
 		snd_hdac_stream_updateb(azx_dev, SD_CTL, SD_INT_MASK, 0);
 
+	synchronize_irq(bus->irq);
+
 	/* disable SIE for all streams */
 	snd_hdac_chip_writeb(bus, INTCTL, 0);
 
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 5732c31c41670..94aa7c9d20405 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1349,9 +1349,9 @@ static int azx_free(struct azx *chip)
 	}
 
 	if (bus->chip_init) {
+		azx_stop_chip(chip);
 		azx_clear_irq_pending(chip);
 		azx_stop_all_streams(chip);
-		azx_stop_chip(chip);
 	}
 
 	if (bus->irq >= 0)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 002/185] ASoC: SOF: Intel: hda: Make hdac_device device-managed
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                   ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ranjani Sridharan, Libin Yang, Takashi Iwai, Mark Brown, Sasha Levin

From: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>

[ Upstream commit ef9bec27485fefb6b93168fea73fda0dc9638046 ]

snd_hdac_ext_bus_device_exit() has been recently modified
to no longer free the hdac device. SOF allocates memory for
hdac_device and hda_hda_priv with kzalloc. Make them
device-managed instead so that they will be freed when the
SOF driver is unloaded.

Because of the above change, hda_codec is device-managed and
it will be freed when the ASoC device is removed. Freeing
the codec in snd_hda_codec_dev_release() leads to kernel
panic while unloading and reloading the ASoC driver. So,
avoid freeing the hda_codec for ASoC driver. This is done in
the same patch to avoid bisect failure.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20190626070450.7229-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_codec.c       | 8 +++++++-
 sound/soc/sof/intel/hda-codec.c | 6 ++----
 2 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 106328584998f..c2a6554c98776 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -846,7 +846,13 @@ static void snd_hda_codec_dev_release(struct device *dev)
 	snd_hda_sysfs_clear(codec);
 	kfree(codec->modelname);
 	kfree(codec->wcaps);
-	kfree(codec);
+
+	/*
+	 * In the case of ASoC HD-audio, hda_codec is device managed.
+	 * It will be freed when the ASoC device is removed.
+	 */
+	if (codec->core.type == HDA_DEV_LEGACY)
+		kfree(codec);
 }
 
 #define DEV_NAME_LEN 31
diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c
index b8b37f0823094..0d8437b080bfa 100644
--- a/sound/soc/sof/intel/hda-codec.c
+++ b/sound/soc/sof/intel/hda-codec.c
@@ -62,8 +62,7 @@ static int hda_codec_probe(struct snd_sof_dev *sdev, int address)
 		address, resp);
 
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC)
-	/* snd_hdac_ext_bus_device_exit will use kfree to free hdev */
-	hda_priv = kzalloc(sizeof(*hda_priv), GFP_KERNEL);
+	hda_priv = devm_kzalloc(sdev->dev, sizeof(*hda_priv), GFP_KERNEL);
 	if (!hda_priv)
 		return -ENOMEM;
 
@@ -82,8 +81,7 @@ static int hda_codec_probe(struct snd_sof_dev *sdev, int address)
 
 	return 0;
 #else
-	/* snd_hdac_ext_bus_device_exit will use kfree to free hdev */
-	hdev = kzalloc(sizeof(*hdev), GFP_KERNEL);
+	hdev = devm_kzalloc(sdev->dev, sizeof(*hdev), GFP_KERNEL);
 	if (!hdev)
 		return -ENOMEM;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 002/185] ASoC: SOF: Intel: hda: Make hdac_device device-managed Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 004/185] regulator: lm363x: Fix off-by-one n_voltages for lm3632 ldo_vpos/ldo_vneg Sasha Levin
                   ` (181 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hariprasad Kelam, Viresh Kumar, Sasha Levin, linux-pm

From: Hariprasad Kelam <hariprasad.kelam@gmail.com>

[ Upstream commit 3355c91b79394593ebbb197c8e930a91826f4ff3 ]

Add NULL check  after kcalloc.

Fix below issue reported by coccicheck
./drivers/cpufreq/armada-8k-cpufreq.c:138:1-12: alloc with no test,
possible model on line 151

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/armada-8k-cpufreq.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/cpufreq/armada-8k-cpufreq.c b/drivers/cpufreq/armada-8k-cpufreq.c
index 988ebc326bdbb..39e34f5066d3d 100644
--- a/drivers/cpufreq/armada-8k-cpufreq.c
+++ b/drivers/cpufreq/armada-8k-cpufreq.c
@@ -136,6 +136,8 @@ static int __init armada_8k_cpufreq_init(void)
 
 	nb_cpus = num_possible_cpus();
 	freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL);
+	if (!freq_tables)
+		return -ENOMEM;
 	cpumask_copy(&cpus, cpu_possible_mask);
 
 	/*
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 004/185] regulator: lm363x: Fix off-by-one n_voltages for lm3632 ldo_vpos/ldo_vneg
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 002/185] ASoC: SOF: Intel: hda: Make hdac_device device-managed Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 005/185] spi: dw-mmio: Clock should be shut when error occurs Sasha Levin
                   ` (180 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Axel Lin, Mark Brown, Sasha Levin

From: Axel Lin <axel.lin@ingics.com>

[ Upstream commit 1e2cc8c5e0745b545d4974788dc606d678b6e564 ]

According to the datasheet https://www.ti.com/lit/ds/symlink/lm3632a.pdf
Table 20. VPOS Bias Register Field Descriptions VPOS[5:0]
Sets the Positive Display Bias (LDO) Voltage (50 mV per step)
000000: 4 V
000001: 4.05 V
000010: 4.1 V
....................
011101: 5.45 V
011110: 5.5 V (Default)
011111: 5.55 V
....................
100111: 5.95 V
101000: 6 V
Note: Codes 101001 to 111111 map to 6 V

The LM3632_LDO_VSEL_MAX should be 0b101000 (0x28), so the maximum voltage
can match the datasheet.

Fixes: 3a8d1a73a037 ("regulator: add LM363X driver")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20190626132632.32629-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/lm363x-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c
index 60f15a7227607..7e2ea8c76f6ea 100644
--- a/drivers/regulator/lm363x-regulator.c
+++ b/drivers/regulator/lm363x-regulator.c
@@ -30,7 +30,7 @@
 
 /* LM3632 */
 #define LM3632_BOOST_VSEL_MAX		0x26
-#define LM3632_LDO_VSEL_MAX		0x29
+#define LM3632_LDO_VSEL_MAX		0x28
 #define LM3632_VBOOST_MIN		4500000
 #define LM3632_VLDO_MIN			4000000
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 005/185] spi: dw-mmio: Clock should be shut when error occurs
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (2 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 004/185] regulator: lm363x: Fix off-by-one n_voltages for lm3632 ldo_vpos/ldo_vneg Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 006/185] ASoC: tlv320aic31xx: suppress error message for EPROBE_DEFER Sasha Levin
                   ` (179 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Andy Shevchenko, Phil Edworthy, Gareth Williams, Mark Brown,
	Sasha Levin, linux-spi

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 3da9834d9381dd99273f2ad4e6d096c9187dc4f2 ]

When optional clock requesting fails, the main clock is still up and running,
we should shut it down in such caee.

Fixes: 560ee7e91009 ("spi: dw: Add support for an optional interface clock")
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Gareth Williams <gareth.williams.jx@renesas.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gareth Williams <gareth.williams.jx@renesas.com>
Link: https://lore.kernel.org/r/20190710114243.30101-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw-mmio.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 18c06568805e7..86789dbaf5771 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -172,8 +172,10 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 
 	/* Optional clock needed to access the registers */
 	dwsmmio->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
-	if (IS_ERR(dwsmmio->pclk))
-		return PTR_ERR(dwsmmio->pclk);
+	if (IS_ERR(dwsmmio->pclk)) {
+		ret = PTR_ERR(dwsmmio->pclk);
+		goto out_clk;
+	}
 	ret = clk_prepare_enable(dwsmmio->pclk);
 	if (ret)
 		goto out_clk;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 006/185] ASoC: tlv320aic31xx: suppress error message for EPROBE_DEFER
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (3 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 005/185] spi: dw-mmio: Clock should be shut when error occurs Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 007/185] ASoC: sgtl5000: Fix of unmute outputs on probe Sasha Levin
                   ` (178 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Lucas Stach, Andrew F . Davis, Mark Brown, Sasha Levin

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit b7e814deae33eb30f8f8c6528e8e69b107978d88 ]

Both the supplies and reset GPIO might need a probe deferral for the
resource to be available. Don't print a error message in that case, as
it is a normal operating condition.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Andrew F. Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20190719143637.2018-1-l.stach@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/tlv320aic31xx.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c
index 9b37e98da0db1..26a4f6cd32883 100644
--- a/sound/soc/codecs/tlv320aic31xx.c
+++ b/sound/soc/codecs/tlv320aic31xx.c
@@ -1553,7 +1553,8 @@ static int aic31xx_i2c_probe(struct i2c_client *i2c,
 	aic31xx->gpio_reset = devm_gpiod_get_optional(aic31xx->dev, "reset",
 						      GPIOD_OUT_LOW);
 	if (IS_ERR(aic31xx->gpio_reset)) {
-		dev_err(aic31xx->dev, "not able to acquire gpio\n");
+		if (PTR_ERR(aic31xx->gpio_reset) != -EPROBE_DEFER)
+			dev_err(aic31xx->dev, "not able to acquire gpio\n");
 		return PTR_ERR(aic31xx->gpio_reset);
 	}
 
@@ -1564,7 +1565,9 @@ static int aic31xx_i2c_probe(struct i2c_client *i2c,
 				      ARRAY_SIZE(aic31xx->supplies),
 				      aic31xx->supplies);
 	if (ret) {
-		dev_err(aic31xx->dev, "Failed to request supplies: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(aic31xx->dev,
+				"Failed to request supplies: %d\n", ret);
 		return ret;
 	}
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 007/185] ASoC: sgtl5000: Fix of unmute outputs on probe
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (4 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 006/185] ASoC: tlv320aic31xx: suppress error message for EPROBE_DEFER Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 008/185] ASoC: sgtl5000: Fix charge pump source assignment Sasha Levin
                   ` (177 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Oleksandr Suvorov, Marcel Ziswiler, Igor Opaniuk, Fabio Estevam,
	Mark Brown, Sasha Levin

From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>

[ Upstream commit 631bc8f0134ae9620d86a96b8c5f9445d91a2dca ]

To enable "zero cross detect" for ADC/HP, change
HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole
CHIP_ANA_CTRL register.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-6-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/sgtl5000.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index a6a4748c97f9d..aad9eca41587e 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1288,6 +1288,7 @@ static int sgtl5000_probe(struct snd_soc_component *component)
 	int ret;
 	u16 reg;
 	struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
+	unsigned int zcd_mask = SGTL5000_HP_ZCD_EN | SGTL5000_ADC_ZCD_EN;
 
 	/* power up sgtl5000 */
 	ret = sgtl5000_set_power_regs(component);
@@ -1315,9 +1316,8 @@ static int sgtl5000_probe(struct snd_soc_component *component)
 	       0x1f);
 	snd_soc_component_write(component, SGTL5000_CHIP_PAD_STRENGTH, reg);
 
-	snd_soc_component_write(component, SGTL5000_CHIP_ANA_CTRL,
-			SGTL5000_HP_ZCD_EN |
-			SGTL5000_ADC_ZCD_EN);
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+		zcd_mask, zcd_mask);
 
 	snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL,
 			SGTL5000_BIAS_R_MASK,
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 008/185] ASoC: sgtl5000: Fix charge pump source assignment
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (5 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 007/185] ASoC: sgtl5000: Fix of unmute outputs on probe Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 009/185] firmware: qcom_scm: Use proper types for dma mappings Sasha Levin
                   ` (176 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Oleksandr Suvorov, Marcel Ziswiler, Igor Opaniuk, Fabio Estevam,
	Mark Brown, Sasha Levin

From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>

[ Upstream commit b6319b061ba279577fd7030a9848fbd6a17151e3 ]

If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
source can be assigned automatically [1].

[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-7-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/sgtl5000.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index aad9eca41587e..7cbaedffa1ef7 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1173,12 +1173,17 @@ static int sgtl5000_set_power_regs(struct snd_soc_component *component)
 					SGTL5000_INT_OSC_EN);
 		/* Enable VDDC charge pump */
 		ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
-	} else if (vddio >= 3100 && vdda >= 3100) {
+	} else {
 		ana_pwr &= ~SGTL5000_VDDC_CHRGPMP_POWERUP;
-		/* VDDC use VDDIO rail */
-		lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
-		lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
-			    SGTL5000_VDDC_MAN_ASSN_SHIFT;
+		/*
+		 * if vddio == vdda the source of charge pump should be
+		 * assigned manually to VDDIO
+		 */
+		if (vddio == vdda) {
+			lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
+			lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
+				    SGTL5000_VDDC_MAN_ASSN_SHIFT;
+		}
 	}
 
 	snd_soc_component_write(component, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 009/185] firmware: qcom_scm: Use proper types for dma mappings
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (6 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 008/185] ASoC: sgtl5000: Fix charge pump source assignment Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 010/185] dmaengine: bcm2835: Print error in case setting DMA mask fails Sasha Levin
                   ` (175 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Stephen Boyd, Ian Jackson, Julien Grall, Bjorn Andersson,
	Avaneesh Kumar Dwivedi, Sasha Levin, linux-arm-msm, linux-soc

From: Stephen Boyd <swboyd@chromium.org>

[ Upstream commit 6e37ccf78a53296c6c7bf426065762c27829eb84 ]

We need to use the proper types and convert between physical addresses
and dma addresses here to avoid mismatch warnings. This is especially
important on systems with a different size for dma addresses and
physical addresses. Otherwise, we get the following warning:

  drivers/firmware/qcom_scm.c: In function "qcom_scm_assign_mem":
  drivers/firmware/qcom_scm.c:469:47: error: passing argument 3 of "dma_alloc_coherent" from incompatible pointer type [-Werror=incompatible-pointer-types]

We also fix the size argument to dma_free_coherent() because that size
doesn't need to be aligned after it's already aligned on the allocation
size. In fact, dma debugging expects the same arguments to be passed to
both the allocation and freeing sides of the functions so changing the
size is incorrect regardless.

Reported-by: Ian Jackson <ian.jackson@citrix.com>
Cc: Ian Jackson <ian.jackson@citrix.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/qcom_scm.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 2ddc118dba1b4..74b84244a0db8 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -9,6 +9,7 @@
 #include <linux/init.h>
 #include <linux/cpumask.h>
 #include <linux/export.h>
+#include <linux/dma-direct.h>
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/types.h>
@@ -440,6 +441,7 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
 	phys_addr_t mem_to_map_phys;
 	phys_addr_t dest_phys;
 	phys_addr_t ptr_phys;
+	dma_addr_t ptr_dma;
 	size_t mem_to_map_sz;
 	size_t dest_sz;
 	size_t src_sz;
@@ -457,9 +459,10 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
 	ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(mem_to_map_sz, SZ_64) +
 			ALIGN(dest_sz, SZ_64);
 
-	ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_phys, GFP_KERNEL);
+	ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_dma, GFP_KERNEL);
 	if (!ptr)
 		return -ENOMEM;
+	ptr_phys = dma_to_phys(__scm->dev, ptr_dma);
 
 	/* Fill source vmid detail */
 	src = ptr;
@@ -489,7 +492,7 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
 
 	ret = __qcom_scm_assign_mem(__scm->dev, mem_to_map_phys, mem_to_map_sz,
 				    ptr_phys, src_sz, dest_phys, dest_sz);
-	dma_free_coherent(__scm->dev, ALIGN(ptr_sz, SZ_64), ptr, ptr_phys);
+	dma_free_coherent(__scm->dev, ptr_sz, ptr, ptr_dma);
 	if (ret) {
 		dev_err(__scm->dev,
 			"Assign memory protection call failed %d.\n", ret);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 010/185] dmaengine: bcm2835: Print error in case setting DMA mask fails
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (7 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 009/185] firmware: qcom_scm: Use proper types for dma mappings Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 011/185] leds: leds-lp5562 allow firmware files up to the maximum length Sasha Levin
                   ` (174 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Stefan Wahren, Vinod Koul, Sasha Levin, dmaengine

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit 72503b25ee363827aafffc3e8d872e6a92a7e422 ]

During enabling of the RPi 4, we found out that the driver doesn't provide
a helpful error message in case setting DMA mask fails. So add one.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/1563297318-4900-1-git-send-email-wahrenst@gmx.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/bcm2835-dma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c
index 8101ff2f05c1c..970f654611bdd 100644
--- a/drivers/dma/bcm2835-dma.c
+++ b/drivers/dma/bcm2835-dma.c
@@ -871,8 +871,10 @@ static int bcm2835_dma_probe(struct platform_device *pdev)
 		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
 
 	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
-	if (rc)
+	if (rc) {
+		dev_err(&pdev->dev, "Unable to set DMA mask\n");
 		return rc;
+	}
 
 	od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL);
 	if (!od)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 011/185] leds: leds-lp5562 allow firmware files up to the maximum length
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (8 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 010/185] dmaengine: bcm2835: Print error in case setting DMA mask fails Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 012/185] media: dib0700: fix link error for dibx000_i2c_set_speed Sasha Levin
                   ` (173 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Nick Stoughton, Pavel Machek, Jacek Anaszewski, Sasha Levin, linux-leds

From: Nick Stoughton <nstoughton@logitech.com>

[ Upstream commit ed2abfebb041473092b41527903f93390d38afa7 ]

Firmware files are in ASCII, using 2 hex characters per byte. The
maximum length of a firmware string is therefore

16 (commands) * 2 (bytes per command) * 2 (characters per byte) = 64

Fixes: ff45262a85db ("leds: add new LP5562 LED driver")
Signed-off-by: Nick Stoughton <nstoughton@logitech.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/leds-lp5562.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/leds-lp5562.c b/drivers/leds/leds-lp5562.c
index 37632fc637414..edb57c42e8b1d 100644
--- a/drivers/leds/leds-lp5562.c
+++ b/drivers/leds/leds-lp5562.c
@@ -260,7 +260,11 @@ static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
 {
 	const struct firmware *fw = chip->fw;
 
-	if (fw->size > LP5562_PROGRAM_LENGTH) {
+	/*
+	 * the firmware is encoded in ascii hex character, with 2 chars
+	 * per byte
+	 */
+	if (fw->size > (LP5562_PROGRAM_LENGTH * 2)) {
 		dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
 			fw->size);
 		return;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 012/185] media: dib0700: fix link error for dibx000_i2c_set_speed
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (9 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 011/185] leds: leds-lp5562 allow firmware files up to the maximum length Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 013/185] media: mtk-cir: lower de-glitch counter for rc-mm protocol Sasha Levin
                   ` (172 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Arnd Bergmann, Sean Young, Mauro Carvalho Chehab, Sasha Levin,
	linux-media

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 765bb8610d305ee488b35d07e2a04ae52fb2df9c ]

When CONFIG_DVB_DIB9000 is disabled, we can still compile code that
now fails to link against dibx000_i2c_set_speed:

drivers/media/usb/dvb-usb/dib0700_devices.o: In function `dib01x0_pmu_update.constprop.7':
dib0700_devices.c:(.text.unlikely+0x1c9c): undefined reference to `dibx000_i2c_set_speed'

The call sites are both through dib01x0_pmu_update(), which gets passed
an 'i2c' pointer from dib9000_get_i2c_master(), which has returned
NULL. Checking this pointer seems to be a good idea anyway, and it avoids
the link failure in most cases.

Sean Young found another case that is not fixed by that, where certain
gcc versions leave an unused function in place that causes the link error,
but adding an explict IS_ENABLED() check also solves this.

Fixes: b7f54910ce01 ("V4L/DVB (4647): Added module for DiB0700 based devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/dib0700_devices.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c
index 66d685065e065..ab7a100ec84fe 100644
--- a/drivers/media/usb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/usb/dvb-usb/dib0700_devices.c
@@ -2439,9 +2439,13 @@ static int dib9090_tuner_attach(struct dvb_usb_adapter *adap)
 		8, 0x0486,
 	};
 
+	if (!IS_ENABLED(CONFIG_DVB_DIB9000))
+		return -ENODEV;
 	if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL)
 		return -ENODEV;
 	i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
+	if (!i2c)
+		return -ENODEV;
 	if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0)
 		return -ENODEV;
 	dib0700_set_i2c_speed(adap->dev, 1500);
@@ -2517,10 +2521,14 @@ static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap)
 		0, 0x00ef,
 		8, 0x0406,
 	};
+	if (!IS_ENABLED(CONFIG_DVB_DIB9000))
+		return -ENODEV;
 	i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
 	if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL)
 		return -ENODEV;
 	i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
+	if (!i2c)
+		return -ENODEV;
 	if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0)
 		return -ENODEV;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 013/185] media: mtk-cir: lower de-glitch counter for rc-mm protocol
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (10 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 012/185] media: dib0700: fix link error for dibx000_i2c_set_speed Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 014/185] ASoC: SOF: pci: mark last_busy value at runtime PM init Sasha Levin
                   ` (171 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sean Young, Sean Wang, Mauro Carvalho Chehab, Sasha Levin, linux-media

From: Sean Young <sean@mess.org>

[ Upstream commit 5dd4b89dc098bf22cd13e82a308f42a02c102b2b ]

The rc-mm protocol can't be decoded by the mtk-cir since the de-glitch
filter removes pulses/spaces shorter than 294 microseconds.

Tested on a BananaPi R2.

Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/mtk-cir.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/media/rc/mtk-cir.c b/drivers/media/rc/mtk-cir.c
index 46101efe017be..da457bf851303 100644
--- a/drivers/media/rc/mtk-cir.c
+++ b/drivers/media/rc/mtk-cir.c
@@ -35,6 +35,11 @@
 /* Fields containing pulse width data */
 #define MTK_WIDTH_MASK		  (GENMASK(7, 0))
 
+/* IR threshold */
+#define MTK_IRTHD		 0x14
+#define MTK_DG_CNT_MASK		 (GENMASK(12, 8))
+#define MTK_DG_CNT(x)		 ((x) << 8)
+
 /* Bit to enable interrupt */
 #define MTK_IRINT_EN		  BIT(0)
 
@@ -400,6 +405,9 @@ static int mtk_ir_probe(struct platform_device *pdev)
 	mtk_w32_mask(ir, val, ir->data->fields[MTK_HW_PERIOD].mask,
 		     ir->data->fields[MTK_HW_PERIOD].reg);
 
+	/* Set de-glitch counter */
+	mtk_w32_mask(ir, MTK_DG_CNT(1), MTK_DG_CNT_MASK, MTK_IRTHD);
+
 	/* Enable IR and PWM */
 	val = mtk_r32(ir, MTK_CONFIG_HIGH_REG);
 	val |= MTK_OK_COUNT(ir->data->ok_count) |  MTK_PWM_EN | MTK_IR_EN;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 014/185] ASoC: SOF: pci: mark last_busy value at runtime PM init
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (11 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 013/185] media: mtk-cir: lower de-glitch counter for rc-mm protocol Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 015/185] media: exynos4-is: fix leaked of_node references Sasha Levin
                   ` (170 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Pan Xiuli, Ranjani Sridharan, Pierre-Louis Bossart, Mark Brown,
	Sasha Levin

From: Pan Xiuli <xiuli.pan@linux.intel.com>

[ Upstream commit f1b1b9b136827915624136624ff54aba5890a15b ]

If last_busy value is not set at runtime PM enable, the device will be
suspend immediately after usage counter is 0. Set the last_busy value to
make sure delay is working at first boot up.

Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/sof-pci-dev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c
index b778dffb2d25c..49daf1390dac0 100644
--- a/sound/soc/sof/sof-pci-dev.c
+++ b/sound/soc/sof/sof-pci-dev.c
@@ -203,6 +203,9 @@ static void sof_pci_probe_complete(struct device *dev)
 	 */
 	pm_runtime_allow(dev);
 
+	/* mark last_busy for pm_runtime to make sure not suspend immediately */
+	pm_runtime_mark_last_busy(dev);
+
 	/* follow recommendation in pci-driver.c to decrement usage counter */
 	pm_runtime_put_noidle(dev);
 }
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 015/185] media: exynos4-is: fix leaked of_node references
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (12 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 014/185] ASoC: SOF: pci: mark last_busy value at runtime PM init Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 016/185] media: vivid:add sanity check to avoid divide error and set value to 1 if 0 Sasha Levin
                   ` (169 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Wen Yang, Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin, linux-media

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit da79bf41a4d170ca93cc8f3881a70d734a071c37 ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/media/platform/exynos4-is/fimc-is.c:813:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/fimc-is.c:870:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/fimc-is.c:885:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/media-dev.c:545:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 541, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/media-dev.c:528:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 499, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/media-dev.c:534:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 499, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/fimc-is.c   | 1 +
 drivers/media/platform/exynos4-is/media-dev.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c
index e043d55133a31..b7cc8e651e327 100644
--- a/drivers/media/platform/exynos4-is/fimc-is.c
+++ b/drivers/media/platform/exynos4-is/fimc-is.c
@@ -806,6 +806,7 @@ static int fimc_is_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	is->pmu_regs = of_iomap(node, 0);
+	of_node_put(node);
 	if (!is->pmu_regs)
 		return -ENOMEM;
 
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 1b83a6ec745fb..3cece7cd73e28 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -499,6 +499,7 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
 			continue;
 
 		ret = fimc_md_parse_port_node(fmd, port, index);
+		of_node_put(port);
 		if (ret < 0) {
 			of_node_put(node);
 			goto cleanup;
@@ -538,6 +539,7 @@ static int __of_get_csis_id(struct device_node *np)
 	if (!np)
 		return -EINVAL;
 	of_property_read_u32(np, "reg", &reg);
+	of_node_put(np);
 	return reg - FIMC_INPUT_MIPI_CSI2_0;
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 016/185] media: vivid:add sanity check to avoid divide error and set value to 1 if 0.
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (13 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 015/185] media: exynos4-is: fix leaked of_node references Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 017/185] media: vb2: reorder checks in vb2_poll() Sasha Levin
                   ` (168 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Vandana BN, Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin,
	linux-media

From: Vandana BN <bnvandana@gmail.com>

[ Upstream commit aa9c2182c45421d54ed27c2a1765f7adedce291b ]

Syzbot reported divide error in vivid_thread_vid_cap, which has been
seen only once and does not have a reproducer.
This patch adds sanity checks for the
denominator value with WARN_ON if it is 0 and replaces it with 1.

divide error: 0000 [#1] PREEMPT SMP KASAN
kobject: 'tx-0' (0000000017161f7f): kobject_uevent_env
CPU: 0 PID: 23689 Comm: vivid-003-vid-c Not tainted 5.0.0-rc4+ #58
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:vivid_cap_update_frame_period
drivers/media/platform/vivid/vivid-kthread-cap.c:661 [inline]
RIP: 0010:vivid_thread_vid_cap+0x221/0x284
drivers/media/platform/vivid/vivid-kthread-cap.c:789
Code: 48 c1 e9 03 0f b6 0c 11 48 89 f2 48 69 c0 00 ca 9a 3b 83 c2 03 38
ca
7c 08 84 c9 0f 85 f0 1e 00 00 41 8b 8f 24 64 00 00 31 d2 <48> f7 f1 49
89
c4 48 89 c3 49 8d 87 28 64 00 00 48 89 c2 48 89 45
RSP: 0018:ffff88808b4afd68 EFLAGS: 00010246
kobject: 'tx-0' (0000000017161f7f): fill_kobj_path: path
= '/devices/virtual/net/gre0/queues/tx-0'
RAX: 000000de5a6f8e00 RBX: 0000000100047b22 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000004
RBP: ffff88808b4aff00 R08: ffff88804862e1c0 R09: ffffffff89997008
R10: ffffffff89997010 R11: 0000000000000001 R12: 00000000fffffffc
R13: ffff8880a17e0500 R14: ffff88803e40f760 R15: ffff8882182b0140
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004cdc90 CR3: 000000005d827000 CR4: 00000000001426f0
Call Trace:
kobject: 'gretap0' (00000000d7549098): kobject_add_internal: parent:
'net',
set: 'devices'
kobject: 'loop2' (0000000094ed4ee4): kobject_uevent_env
kobject: 'loop2' (0000000094ed4ee4): fill_kobj_path: path
= '/devices/virtual/block/loop2'
  kthread+0x357/0x430 kernel/kthread.c:246
kobject: 'gretap0' (00000000d7549098): kobject_uevent_env
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Modules linked in:
kobject: 'gretap0' (00000000d7549098): fill_kobj_path: path
= '/devices/virtual/net/gretap0'
---[ end trace bc5c8b25b64d768f ]---
kobject: 'loop1' (0000000032036b86): kobject_uevent_env
RIP: 0010:vivid_cap_update_frame_period
drivers/media/platform/vivid/vivid-kthread-cap.c:661 [inline]
RIP: 0010:vivid_thread_vid_cap+0x221/0x2840
drivers/media/platform/vivid/vivid-kthread-cap.c:789
kobject: 'loop1' (0000000032036b86): fill_kobj_path: path
= '/devices/virtual/block/loop1'
Code: 48 c1 e9 03 0f b6 0c 11 48 89 f2 48 69 c0 00 ca 9a 3b 83 c2 03 38
ca
7c 08 84 c9 0f 85 f0 1e 00 00 41 8b 8f 24 64 00 00 31 d2 <48> f7 f1 49
89
c4 48 89 c3 49 8d 87 28 64 00 00 48 89 c2 48 89 45
kobject: 'loop0' (00000000dd9927c3): kobject_uevent_env
RSP: 0018:ffff88808b4afd68 EFLAGS: 00010246
RAX: 000000de5a6f8e00 RBX: 0000000100047b22 RCX: 0000000000000000
kobject: 'queues' (000000007ed20666): kobject_add_internal:
parent: 'gretap0', set: '<NULL>'
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000004
RBP: ffff88808b4aff00 R08: ffff88804862e1c0 R09: ffffffff89997008
kobject: 'loop0' (00000000dd9927c3): fill_kobj_path: path
= '/devices/virtual/block/loop0'
R10: ffffffff89997010 R11: 0000000000000001 R12: 00000000fffffffc
kobject: 'queues' (000000007ed20666): kobject_uevent_env
R13: ffff8880a17e0500 R14: ffff88803e40f760 R15: ffff8882182b0140
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000)
knlGS:0000000000000000
kobject: 'loop5' (00000000a41f9e79): kobject_uevent_env
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kobject: 'queues' (000000007ed20666): kobject_uevent_env: filter
function
caused the event to drop!
CR2: 00000000004cdc90 CR3: 000000005d827000 CR4: 00000000001426f0
kobject: 'loop5' (00000000a41f9e79): fill_kobj_path: path
= '/devices/virtual/block/loop5'

Reported-by: syz...@syzkaller.appspotmail.com
Signed-off-by: Vandana BN <bnvandana@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/vivid/vivid-kthread-cap.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/platform/vivid/vivid-kthread-cap.c b/drivers/media/platform/vivid/vivid-kthread-cap.c
index f8006a30c12fb..cf6dfecf879f7 100644
--- a/drivers/media/platform/vivid/vivid-kthread-cap.c
+++ b/drivers/media/platform/vivid/vivid-kthread-cap.c
@@ -658,6 +658,8 @@ static void vivid_cap_update_frame_period(struct vivid_dev *dev)
 	u64 f_period;
 
 	f_period = (u64)dev->timeperframe_vid_cap.numerator * 1000000000;
+	if (WARN_ON(dev->timeperframe_vid_cap.denominator == 0))
+		dev->timeperframe_vid_cap.denominator = 1;
 	do_div(f_period, dev->timeperframe_vid_cap.denominator);
 	if (dev->field_cap == V4L2_FIELD_ALTERNATE)
 		f_period >>= 1;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 017/185] media: vb2: reorder checks in vb2_poll()
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (14 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 016/185] media: vivid:add sanity check to avoid divide error and set value to 1 if 0 Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 018/185] media: vivid: work around high stack usage with clang Sasha Levin
                   ` (167 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Michael Tretter, Hans Verkuil, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: Michael Tretter <m.tretter@pengutronix.de>

[ Upstream commit 8d86a15649957c182e90fa2b1267c16699bc12f1 ]

When reaching the end of stream, V4L2 clients may expect the
V4L2_EOS_EVENT before being able to dequeue the last buffer, which has
the V4L2_BUF_FLAG_LAST flag set.

If the vb2_poll() function first checks for events and afterwards if
buffers are available, a driver can queue the V4L2_EOS_EVENT event and
return the buffer after the check for events but before the check for
buffers. This causes vb2_poll() to signal that the buffer with
V4L2_BUF_FLAG_LAST can be read without the V4L2_EOS_EVENT being
available.

First, check for available buffers and afterwards for events to ensure
that if vb2_poll() signals POLLIN | POLLRDNORM for the
V4L2_BUF_FLAG_LAST buffer, it also signals POLLPRI for the
V4L2_EOS_EVENT.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/common/videobuf2/videobuf2-v4l2.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c
index fb9ac7696fc6e..bd9bfeee385fb 100644
--- a/drivers/media/common/videobuf2/videobuf2-v4l2.c
+++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c
@@ -872,17 +872,19 @@ EXPORT_SYMBOL_GPL(vb2_queue_release);
 __poll_t vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait)
 {
 	struct video_device *vfd = video_devdata(file);
-	__poll_t res = 0;
+	__poll_t res;
+
+	res = vb2_core_poll(q, file, wait);
 
 	if (test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags)) {
 		struct v4l2_fh *fh = file->private_data;
 
 		poll_wait(file, &fh->wait, wait);
 		if (v4l2_event_pending(fh))
-			res = EPOLLPRI;
+			res |= EPOLLPRI;
 	}
 
-	return res | vb2_core_poll(q, file, wait);
+	return res;
 }
 EXPORT_SYMBOL_GPL(vb2_poll);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 018/185] media: vivid: work around high stack usage with clang
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (15 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 017/185] media: vb2: reorder checks in vb2_poll() Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 019/185] media: hdpvr: Add device num check and handling Sasha Levin
                   ` (166 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Arnd Bergmann, Nick Desaulniers, Hans Verkuil,
	Mauro Carvalho Chehab, Sasha Levin, linux-media

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 1a03f91c2c2419c3709c4554952c66695575e91c ]

Building a KASAN-enabled kernel with clang ends up in a case where too
much is inlined into vivid_thread_vid_cap() and the stack usage grows
a lot, possibly when the register allocation fails to produce efficient
code and spills a lot of temporaries to the stack. This uses more
than twice the amount of stack than the sum of the individual functions
when they are not inlined:

drivers/media/platform/vivid/vivid-kthread-cap.c:766:12: error: stack frame size of 2208 bytes in function 'vivid_thread_vid_cap' [-Werror,-Wframe-larger-than=]

Marking two of the key functions in here as 'noinline_for_stack' avoids
the pathological case in clang without any apparent downside for gcc.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/vivid/vivid-kthread-cap.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/vivid/vivid-kthread-cap.c b/drivers/media/platform/vivid/vivid-kthread-cap.c
index cf6dfecf879f7..96d85cd8839f3 100644
--- a/drivers/media/platform/vivid/vivid-kthread-cap.c
+++ b/drivers/media/platform/vivid/vivid-kthread-cap.c
@@ -232,8 +232,8 @@ static void *plane_vaddr(struct tpg_data *tpg, struct vivid_buffer *buf,
 	return vbuf;
 }
 
-static int vivid_copy_buffer(struct vivid_dev *dev, unsigned p, u8 *vcapbuf,
-		struct vivid_buffer *vid_cap_buf)
+static noinline_for_stack int vivid_copy_buffer(struct vivid_dev *dev, unsigned p,
+		u8 *vcapbuf, struct vivid_buffer *vid_cap_buf)
 {
 	bool blank = dev->must_blank[vid_cap_buf->vb.vb2_buf.index];
 	struct tpg_data *tpg = &dev->tpg;
@@ -672,7 +672,8 @@ static void vivid_cap_update_frame_period(struct vivid_dev *dev)
 	dev->cap_frame_period = f_period;
 }
 
-static void vivid_thread_vid_cap_tick(struct vivid_dev *dev, int dropped_bufs)
+static noinline_for_stack void vivid_thread_vid_cap_tick(struct vivid_dev *dev,
+							 int dropped_bufs)
 {
 	struct vivid_buffer *vid_cap_buf = NULL;
 	struct vivid_buffer *vbi_cap_buf = NULL;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 019/185] media: hdpvr: Add device num check and handling
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (16 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 018/185] media: vivid: work around high stack usage with clang Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 020/185] media: i2c: ov5640: Check for devm_gpiod_get_optional() error Sasha Levin
                   ` (165 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Luke Nowakowski-Krijger, syzbot+aac8d0d7205f112045d2,
	Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin, linux-media

From: Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu>

[ Upstream commit d4a6a9537bc32811486282206ecfb7c53754b74d ]

Add hdpvr device num check and error handling

We need to increment the device count atomically before we checkout a
device to make sure that we do not reach the max count, otherwise we get
out-of-bounds errors as reported by syzbot.

Reported-and-tested-by: syzbot+aac8d0d7205f112045d2@syzkaller.appspotmail.com

Signed-off-by: Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/hdpvr/hdpvr-core.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/hdpvr/hdpvr-core.c b/drivers/media/usb/hdpvr/hdpvr-core.c
index 9b9d894d29bcb..a0905c81d2cb2 100644
--- a/drivers/media/usb/hdpvr/hdpvr-core.c
+++ b/drivers/media/usb/hdpvr/hdpvr-core.c
@@ -271,6 +271,7 @@ static int hdpvr_probe(struct usb_interface *interface,
 #endif
 	size_t buffer_size;
 	int i;
+	int dev_num;
 	int retval = -ENOMEM;
 
 	/* allocate memory for our device state and initialize it */
@@ -368,8 +369,17 @@ static int hdpvr_probe(struct usb_interface *interface,
 	}
 #endif
 
+	dev_num = atomic_inc_return(&dev_nr);
+	if (dev_num >= HDPVR_MAX) {
+		v4l2_err(&dev->v4l2_dev,
+			 "max device number reached, device register failed\n");
+		atomic_dec(&dev_nr);
+		retval = -ENODEV;
+		goto reg_fail;
+	}
+
 	retval = hdpvr_register_videodev(dev, &interface->dev,
-				    video_nr[atomic_inc_return(&dev_nr)]);
+				    video_nr[dev_num]);
 	if (retval < 0) {
 		v4l2_err(&dev->v4l2_dev, "registering videodev failed\n");
 		goto reg_fail;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 020/185] media: i2c: ov5640: Check for devm_gpiod_get_optional() error
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (17 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 019/185] media: hdpvr: Add device num check and handling Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 021/185] time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaint Sasha Levin
                   ` (164 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Fabio Estevam, Sakari Ailus, Mauro Carvalho Chehab, Sasha Levin,
	linux-media

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit 8791a102ce579346cea9d2f911afef1c1985213c ]

The power down and reset GPIO are optional, but the return value
from devm_gpiod_get_optional() needs to be checked and propagated
in the case of error, so that probe deferral can work.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov5640.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 759d60c6d6304..afe7920557a8f 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -3022,9 +3022,14 @@ static int ov5640_probe(struct i2c_client *client,
 	/* request optional power down pin */
 	sensor->pwdn_gpio = devm_gpiod_get_optional(dev, "powerdown",
 						    GPIOD_OUT_HIGH);
+	if (IS_ERR(sensor->pwdn_gpio))
+		return PTR_ERR(sensor->pwdn_gpio);
+
 	/* request optional reset pin */
 	sensor->reset_gpio = devm_gpiod_get_optional(dev, "reset",
 						     GPIOD_OUT_HIGH);
+	if (IS_ERR(sensor->reset_gpio))
+		return PTR_ERR(sensor->reset_gpio);
 
 	v4l2_i2c_subdev_init(&sensor->sd, client, &ov5640_subdev_ops);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 021/185] time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaint
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (18 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 020/185] media: i2c: ov5640: Check for devm_gpiod_get_optional() error Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 022/185] sched/fair: Fix imbalance due to CPU affinity Sasha Levin
                   ` (163 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Paul E. McKenney, Peter Zijlstra, Frederic Weisbecker,
	Linus Torvalds, Thomas Gleixner, Ingo Molnar, Sasha Levin

From: "Paul E. McKenney" <paulmck@linux.ibm.com>

[ Upstream commit 84ec3a0787086fcd25f284f59b3aa01fd6fc0a5d ]

time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaint

The TASKS03 and TREE04 rcutorture scenarios produce the following
lockdep complaint:

	WARNING: inconsistent lock state
	5.2.0-rc1+ #513 Not tainted
	--------------------------------
	inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
	migration/1/14 [HC0[0]:SC0[0]:HE1:SE1] takes:
	(____ptrval____) (tick_broadcast_lock){?...}, at: tick_broadcast_offline+0xf/0x70
	{IN-HARDIRQ-W} state was registered at:
	  lock_acquire+0xb0/0x1c0
	  _raw_spin_lock_irqsave+0x3c/0x50
	  tick_broadcast_switch_to_oneshot+0xd/0x40
	  tick_switch_to_oneshot+0x4f/0xd0
	  hrtimer_run_queues+0xf3/0x130
	  run_local_timers+0x1c/0x50
	  update_process_times+0x1c/0x50
	  tick_periodic+0x26/0xc0
	  tick_handle_periodic+0x1a/0x60
	  smp_apic_timer_interrupt+0x80/0x2a0
	  apic_timer_interrupt+0xf/0x20
	  _raw_spin_unlock_irqrestore+0x4e/0x60
	  rcu_nocb_gp_kthread+0x15d/0x590
	  kthread+0xf3/0x130
	  ret_from_fork+0x3a/0x50
	irq event stamp: 171
	hardirqs last  enabled at (171): [<ffffffff8a201a37>] trace_hardirqs_on_thunk+0x1a/0x1c
	hardirqs last disabled at (170): [<ffffffff8a201a53>] trace_hardirqs_off_thunk+0x1a/0x1c
	softirqs last  enabled at (0): [<ffffffff8a264ee0>] copy_process.part.56+0x650/0x1cb0
	softirqs last disabled at (0): [<0000000000000000>] 0x0

        [...]

To reproduce, run the following rcutorture test:

 $ tools/testing/selftests/rcutorture/bin/kvm.sh --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TASKS03 TREE04"

It turns out that tick_broadcast_offline() was an innocent bystander.
After all, interrupts are supposed to be disabled throughout
take_cpu_down(), and therefore should have been disabled upon entry to
tick_offline_cpu() and thus to tick_broadcast_offline().  This suggests
that one of the CPU-hotplug notifiers was incorrectly enabling interrupts,
and leaving them enabled on return.

Some debugging code showed that the culprit was sched_cpu_dying().
It had irqs enabled after return from sched_tick_stop().  Which in turn
had irqs enabled after return from cancel_delayed_work_sync().  Which is a
wrapper around __cancel_work_timer().  Which can sleep in the case where
something else is concurrently trying to cancel the same delayed work,
and as Thomas Gleixner pointed out on IRC, sleeping is a decidedly bad
idea when you are invoked from take_cpu_down(), regardless of the state
you leave interrupts in upon return.

Code inspection located no reason why the delayed work absolutely
needed to be canceled from sched_tick_stop():  The work is not
bound to the outgoing CPU by design, given that the whole point is
to collect statistics without disturbing the outgoing CPU.

This commit therefore simply drops the cancel_delayed_work_sync() from
sched_tick_stop().  Instead, a new ->state field is added to the tick_work
structure so that the delayed-work handler function sched_tick_remote()
can avoid reposting itself.  A cpu_is_offline() check is also added to
sched_tick_remote() to avoid mucking with the state of an offlined CPU
(though it does appear safe to do so).  The sched_tick_start() and
sched_tick_stop() functions also update ->state, and sched_tick_start()
also schedules the delayed work if ->state indicates that it is not
already in flight.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Apply Peter Zijlstra and Frederic Weisbecker atomics feedback. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190625165238.GJ26519@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 57 ++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 49 insertions(+), 8 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 42bc2986520d7..275f470812440 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3051,8 +3051,36 @@ void scheduler_tick(void)
 
 struct tick_work {
 	int			cpu;
+	atomic_t		state;
 	struct delayed_work	work;
 };
+/* Values for ->state, see diagram below. */
+#define TICK_SCHED_REMOTE_OFFLINE	0
+#define TICK_SCHED_REMOTE_OFFLINING	1
+#define TICK_SCHED_REMOTE_RUNNING	2
+
+/*
+ * State diagram for ->state:
+ *
+ *
+ *          TICK_SCHED_REMOTE_OFFLINE
+ *                    |   ^
+ *                    |   |
+ *                    |   | sched_tick_remote()
+ *                    |   |
+ *                    |   |
+ *                    +--TICK_SCHED_REMOTE_OFFLINING
+ *                    |   ^
+ *                    |   |
+ * sched_tick_start() |   | sched_tick_stop()
+ *                    |   |
+ *                    V   |
+ *          TICK_SCHED_REMOTE_RUNNING
+ *
+ *
+ * Other transitions get WARN_ON_ONCE(), except that sched_tick_remote()
+ * and sched_tick_start() are happy to leave the state in RUNNING.
+ */
 
 static struct tick_work __percpu *tick_work_cpu;
 
@@ -3065,6 +3093,7 @@ static void sched_tick_remote(struct work_struct *work)
 	struct task_struct *curr;
 	struct rq_flags rf;
 	u64 delta;
+	int os;
 
 	/*
 	 * Handle the tick only if it appears the remote CPU is running in full
@@ -3078,7 +3107,7 @@ static void sched_tick_remote(struct work_struct *work)
 
 	rq_lock_irq(rq, &rf);
 	curr = rq->curr;
-	if (is_idle_task(curr))
+	if (is_idle_task(curr) || cpu_is_offline(cpu))
 		goto out_unlock;
 
 	update_rq_clock(rq);
@@ -3098,13 +3127,18 @@ static void sched_tick_remote(struct work_struct *work)
 	/*
 	 * Run the remote tick once per second (1Hz). This arbitrary
 	 * frequency is large enough to avoid overload but short enough
-	 * to keep scheduler internal stats reasonably up to date.
+	 * to keep scheduler internal stats reasonably up to date.  But
+	 * first update state to reflect hotplug activity if required.
 	 */
-	queue_delayed_work(system_unbound_wq, dwork, HZ);
+	os = atomic_fetch_add_unless(&twork->state, -1, TICK_SCHED_REMOTE_RUNNING);
+	WARN_ON_ONCE(os == TICK_SCHED_REMOTE_OFFLINE);
+	if (os == TICK_SCHED_REMOTE_RUNNING)
+		queue_delayed_work(system_unbound_wq, dwork, HZ);
 }
 
 static void sched_tick_start(int cpu)
 {
+	int os;
 	struct tick_work *twork;
 
 	if (housekeeping_cpu(cpu, HK_FLAG_TICK))
@@ -3113,15 +3147,20 @@ static void sched_tick_start(int cpu)
 	WARN_ON_ONCE(!tick_work_cpu);
 
 	twork = per_cpu_ptr(tick_work_cpu, cpu);
-	twork->cpu = cpu;
-	INIT_DELAYED_WORK(&twork->work, sched_tick_remote);
-	queue_delayed_work(system_unbound_wq, &twork->work, HZ);
+	os = atomic_xchg(&twork->state, TICK_SCHED_REMOTE_RUNNING);
+	WARN_ON_ONCE(os == TICK_SCHED_REMOTE_RUNNING);
+	if (os == TICK_SCHED_REMOTE_OFFLINE) {
+		twork->cpu = cpu;
+		INIT_DELAYED_WORK(&twork->work, sched_tick_remote);
+		queue_delayed_work(system_unbound_wq, &twork->work, HZ);
+	}
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
 static void sched_tick_stop(int cpu)
 {
 	struct tick_work *twork;
+	int os;
 
 	if (housekeeping_cpu(cpu, HK_FLAG_TICK))
 		return;
@@ -3129,7 +3168,10 @@ static void sched_tick_stop(int cpu)
 	WARN_ON_ONCE(!tick_work_cpu);
 
 	twork = per_cpu_ptr(tick_work_cpu, cpu);
-	cancel_delayed_work_sync(&twork->work);
+	/* There cannot be competing actions, but don't rely on stop-machine. */
+	os = atomic_xchg(&twork->state, TICK_SCHED_REMOTE_OFFLINING);
+	WARN_ON_ONCE(os != TICK_SCHED_REMOTE_RUNNING);
+	/* Don't cancel, as this would mess up the state machine. */
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
@@ -3137,7 +3179,6 @@ int __init sched_tick_offload_init(void)
 {
 	tick_work_cpu = alloc_percpu(struct tick_work);
 	BUG_ON(!tick_work_cpu);
-
 	return 0;
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 022/185] sched/fair: Fix imbalance due to CPU affinity
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (19 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 021/185] time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaint Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 023/185] sched/core: Fix CPU controller for !RT_GROUP_SCHED Sasha Levin
                   ` (162 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Vincent Guittot, Peter Zijlstra, Linus Torvalds, Thomas Gleixner,
	Ingo Molnar, Sasha Levin

From: Vincent Guittot <vincent.guittot@linaro.org>

[ Upstream commit f6cad8df6b30a5d2bbbd2e698f74b4cafb9fb82b ]

The load_balance() has a dedicated mecanism to detect when an imbalance
is due to CPU affinity and must be handled at parent level. In this case,
the imbalance field of the parent's sched_group is set.

The description of sg_imbalanced() gives a typical example of two groups
of 4 CPUs each and 4 tasks each with a cpumask covering 1 CPU of the first
group and 3 CPUs of the second group. Something like:

	{ 0 1 2 3 } { 4 5 6 7 }
	        *     * * *

But the load_balance fails to fix this UC on my octo cores system
made of 2 clusters of quad cores.

Whereas the load_balance is able to detect that the imbalanced is due to
CPU affinity, it fails to fix it because the imbalance field is cleared
before letting parent level a chance to run. In fact, when the imbalance is
detected, the load_balance reruns without the CPU with pinned tasks. But
there is no other running tasks in the situation described above and
everything looks balanced this time so the imbalance field is immediately
cleared.

The imbalance field should not be cleared if there is no other task to move
when the imbalance is detected.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1561996022-28829-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/fair.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index b07672e793a81..f72bf8122fe4e 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -9319,9 +9319,10 @@ static int load_balance(int this_cpu, struct rq *this_rq,
 out_balanced:
 	/*
 	 * We reach balance although we may have faced some affinity
-	 * constraints. Clear the imbalance flag if it was set.
+	 * constraints. Clear the imbalance flag only if other tasks got
+	 * a chance to move and fix the imbalance.
 	 */
-	if (sd_parent) {
+	if (sd_parent && !(env.flags & LBF_ALL_PINNED)) {
 		int *group_imbalance = &sd_parent->groups->sgc->imbalance;
 
 		if (*group_imbalance)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 023/185] sched/core: Fix CPU controller for !RT_GROUP_SCHED
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (20 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 022/185] sched/fair: Fix imbalance due to CPU affinity Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 024/185] x86/apic: Make apic_pending_intr_clear() more robust Sasha Levin
                   ` (161 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Juri Lelli, Peter Zijlstra, Michal Koutný,
	Daniel Bristot de Oliveira, Tejun Heo, Linus Torvalds,
	Thomas Gleixner, lizefan, longman, luca.abeni, rostedt,
	Ingo Molnar, Sasha Levin

From: Juri Lelli <juri.lelli@redhat.com>

[ Upstream commit a07db5c0865799ebed1f88be0df50c581fb65029 ]

On !CONFIG_RT_GROUP_SCHED configurations it is currently not possible to
move RT tasks between cgroups to which CPU controller has been attached;
but it is oddly possible to first move tasks around and then make them
RT (setschedule to FIFO/RR).

E.g.:

  # mkdir /sys/fs/cgroup/cpu,cpuacct/group1
  # chrt -fp 10 $$
  # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  bash: echo: write error: Invalid argument
  # chrt -op 0 $$
  # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  # chrt -fp 10 $$
  # cat /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  2345
  2598
  # chrt -p 2345
  pid 2345's current scheduling policy: SCHED_FIFO
  pid 2345's current scheduling priority: 10

Also, as Michal noted, it is currently not possible to enable CPU
controller on unified hierarchy with !CONFIG_RT_GROUP_SCHED (if there
are any kernel RT threads in root cgroup, they can't be migrated to the
newly created CPU controller's root in cgroup_update_dfl_csses()).

Existing code comes with a comment saying the "we don't support RT-tasks
being in separate groups". Such comment is however stale and belongs to
pre-RT_GROUP_SCHED times. Also, it doesn't make much sense for
!RT_GROUP_ SCHED configurations, since checks related to RT bandwidth
are not performed at all in these cases.

Make moving RT tasks between CPU controller groups viable by removing
special case check for RT (and DEADLINE) tasks.

Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: rostedt@goodmis.org
Link: https://lkml.kernel.org/r/20190719063455.27328-1-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 275f470812440..b78986ce1f6b0 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -6513,10 +6513,6 @@ static int cpu_cgroup_can_attach(struct cgroup_taskset *tset)
 #ifdef CONFIG_RT_GROUP_SCHED
 		if (!sched_rt_can_attach(css_tg(css), task))
 			return -EINVAL;
-#else
-		/* We don't support RT-tasks being in separate groups */
-		if (task->sched_class != &fair_sched_class)
-			return -EINVAL;
 #endif
 		/*
 		 * Serialize against wake_up_new_task() such that if its
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 024/185] x86/apic: Make apic_pending_intr_clear() more robust
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (21 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 023/185] sched/core: Fix CPU controller for !RT_GROUP_SCHED Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 025/185] sched/deadline: Fix bandwidth accounting at all levels after offline migration Sasha Levin
                   ` (160 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Thomas Gleixner, Peter Zijlstra, Sasha Levin

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit cc8bf191378c1da8ad2b99cf470ee70193ace84e ]

In course of developing shorthand based IPI support issues with the
function which tries to clear eventually pending ISR bits in the local APIC
were observed.

  1) O-day testing triggered the WARN_ON() in apic_pending_intr_clear().

     This warning is emitted when the function fails to clear pending ISR
     bits or observes pending IRR bits which are not delivered to the CPU
     after the stale ISR bit(s) are ACK'ed.

     Unfortunately the function only emits a WARN_ON() and fails to dump
     the IRR/ISR content. That's useless for debugging.

     Feng added spot on debug printk's which revealed that the stale IRR
     bit belonged to the APIC timer interrupt vector, but adding ad hoc
     debug code does not help with sporadic failures in the field.

     Rework the loop so the full IRR/ISR contents are saved and on failure
     dumped.

  2) The loop termination logic is interesting at best.

     If the machine has no TSC or cpu_khz is not known yet it tries 1
     million times to ack stale IRR/ISR bits. What?

     With TSC it uses the TSC to calculate the loop termination. It takes a
     timestamp at entry and terminates the loop when:

     	  (rdtsc() - start_timestamp) >= (cpu_hkz << 10)

     That's roughly one second.

     Both methods are problematic. The APIC has 256 vectors, which means
     that in theory max. 256 IRR/ISR bits can be set. In practice this is
     impossible and the chance that more than a few bits are set is close
     to zero.

     With the pure loop based approach the 1 million retries are complete
     overkill.

     With TSC this can terminate too early in a guest which is running on a
     heavily loaded host even with only a couple of IRR/ISR bits set. The
     reason is that after acknowledging the highest priority ISR bit,
     pending IRRs must get serviced first before the next round of
     acknowledge can take place as the APIC (real and virtualized) does not
     honour EOI without a preceeding interrupt on the CPU. And every APIC
     read/write takes a VMEXIT if the APIC is virtualized. While trying to
     reproduce the issue 0-day reported it was observed that the guest was
     scheduled out long enough under heavy load that it terminated after 8
     iterations.

     Make the loop terminate after 512 iterations. That's plenty enough
     in any case and does not take endless time to complete.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105219.158847694@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/apic/apic.c | 107 +++++++++++++++++++++---------------
 1 file changed, 63 insertions(+), 44 deletions(-)

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 2f067b443326e..67d1259e0f7c0 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1462,54 +1462,72 @@ static void lapic_setup_esr(void)
 			oldvalue, value);
 }
 
-static void apic_pending_intr_clear(void)
+#define APIC_IR_REGS		APIC_ISR_NR
+#define APIC_IR_BITS		(APIC_IR_REGS * 32)
+#define APIC_IR_MAPSIZE		(APIC_IR_BITS / BITS_PER_LONG)
+
+union apic_ir {
+	unsigned long	map[APIC_IR_MAPSIZE];
+	u32		regs[APIC_IR_REGS];
+};
+
+static bool apic_check_and_ack(union apic_ir *irr, union apic_ir *isr)
 {
-	long long max_loops = cpu_khz ? cpu_khz : 1000000;
-	unsigned long long tsc = 0, ntsc;
-	unsigned int queued;
-	unsigned long value;
-	int i, j, acked = 0;
+	int i, bit;
+
+	/* Read the IRRs */
+	for (i = 0; i < APIC_IR_REGS; i++)
+		irr->regs[i] = apic_read(APIC_IRR + i * 0x10);
+
+	/* Read the ISRs */
+	for (i = 0; i < APIC_IR_REGS; i++)
+		isr->regs[i] = apic_read(APIC_ISR + i * 0x10);
 
-	if (boot_cpu_has(X86_FEATURE_TSC))
-		tsc = rdtsc();
 	/*
-	 * After a crash, we no longer service the interrupts and a pending
-	 * interrupt from previous kernel might still have ISR bit set.
-	 *
-	 * Most probably by now CPU has serviced that pending interrupt and
-	 * it might not have done the ack_APIC_irq() because it thought,
-	 * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
-	 * does not clear the ISR bit and cpu thinks it has already serivced
-	 * the interrupt. Hence a vector might get locked. It was noticed
-	 * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
+	 * If the ISR map is not empty. ACK the APIC and run another round
+	 * to verify whether a pending IRR has been unblocked and turned
+	 * into a ISR.
 	 */
-	do {
-		queued = 0;
-		for (i = APIC_ISR_NR - 1; i >= 0; i--)
-			queued |= apic_read(APIC_IRR + i*0x10);
-
-		for (i = APIC_ISR_NR - 1; i >= 0; i--) {
-			value = apic_read(APIC_ISR + i*0x10);
-			for_each_set_bit(j, &value, 32) {
-				ack_APIC_irq();
-				acked++;
-			}
-		}
-		if (acked > 256) {
-			pr_err("LAPIC pending interrupts after %d EOI\n", acked);
-			break;
-		}
-		if (queued) {
-			if (boot_cpu_has(X86_FEATURE_TSC) && cpu_khz) {
-				ntsc = rdtsc();
-				max_loops = (long long)cpu_khz << 10;
-				max_loops -= ntsc - tsc;
-			} else {
-				max_loops--;
-			}
-		}
-	} while (queued && max_loops > 0);
-	WARN_ON(max_loops <= 0);
+	if (!bitmap_empty(isr->map, APIC_IR_BITS)) {
+		/*
+		 * There can be multiple ISR bits set when a high priority
+		 * interrupt preempted a lower priority one. Issue an ACK
+		 * per set bit.
+		 */
+		for_each_set_bit(bit, isr->map, APIC_IR_BITS)
+			ack_APIC_irq();
+		return true;
+	}
+
+	return !bitmap_empty(irr->map, APIC_IR_BITS);
+}
+
+/*
+ * After a crash, we no longer service the interrupts and a pending
+ * interrupt from previous kernel might still have ISR bit set.
+ *
+ * Most probably by now the CPU has serviced that pending interrupt and it
+ * might not have done the ack_APIC_irq() because it thought, interrupt
+ * came from i8259 as ExtInt. LAPIC did not get EOI so it does not clear
+ * the ISR bit and cpu thinks it has already serivced the interrupt. Hence
+ * a vector might get locked. It was noticed for timer irq (vector
+ * 0x31). Issue an extra EOI to clear ISR.
+ *
+ * If there are pending IRR bits they turn into ISR bits after a higher
+ * priority ISR bit has been acked.
+ */
+static void apic_pending_intr_clear(void)
+{
+	union apic_ir irr, isr;
+	unsigned int i;
+
+	/* 512 loops are way oversized and give the APIC a chance to obey. */
+	for (i = 0; i < 512; i++) {
+		if (!apic_check_and_ack(&irr, &isr))
+			return;
+	}
+	/* Dump the IRR/ISR content if that failed */
+	pr_warn("APIC: Stale IRR: %256pb ISR: %256pb\n", irr.map, isr.map);
 }
 
 /**
@@ -1577,6 +1595,7 @@ static void setup_local_APIC(void)
 	value &= ~APIC_TPRI_MASK;
 	apic_write(APIC_TASKPRI, value);
 
+	/* Clear eventually stale ISR/IRR bits */
 	apic_pending_intr_clear();
 
 	/*
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 025/185] sched/deadline: Fix bandwidth accounting at all levels after offline migration
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (22 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 024/185] x86/apic: Make apic_pending_intr_clear() more robust Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 026/185] x86/reboot: Always use NMI fallback when shutdown via reboot vector IPI fails Sasha Levin
                   ` (159 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Juri Lelli, Dietmar Eggemann, Peter Zijlstra, Linus Torvalds,
	Thomas Gleixner, bristot, claudio, lizefan, longman, luca.abeni,
	mathieu.poirier, rostedt, tj, tommaso.cucinotta, Ingo Molnar,
	Sasha Levin

From: Juri Lelli <juri.lelli@redhat.com>

[ Upstream commit 59d06cea1198d665ba11f7e8c5f45b00ff2e4812 ]

If a task happens to be throttled while the CPU it was running on gets
hotplugged off, the bandwidth associated with the task is not correctly
migrated with it when the replenishment timer fires (offline_migration).

Fix things up, for this_bw, running_bw and total_bw, when replenishment
timer fires and task is migrated (dl_task_offline_migration()).

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: mathieu.poirier@linaro.org
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-5-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/deadline.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c
index 1c66480afda81..fcdafdcb129cc 100644
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -529,6 +529,7 @@ static struct rq *find_lock_later_rq(struct task_struct *task, struct rq *rq);
 static struct rq *dl_task_offline_migration(struct rq *rq, struct task_struct *p)
 {
 	struct rq *later_rq = NULL;
+	struct dl_bw *dl_b;
 
 	later_rq = find_lock_later_rq(p, rq);
 	if (!later_rq) {
@@ -557,6 +558,38 @@ static struct rq *dl_task_offline_migration(struct rq *rq, struct task_struct *p
 		double_lock_balance(rq, later_rq);
 	}
 
+	if (p->dl.dl_non_contending || p->dl.dl_throttled) {
+		/*
+		 * Inactive timer is armed (or callback is running, but
+		 * waiting for us to release rq locks). In any case, when it
+		 * will fire (or continue), it will see running_bw of this
+		 * task migrated to later_rq (and correctly handle it).
+		 */
+		sub_running_bw(&p->dl, &rq->dl);
+		sub_rq_bw(&p->dl, &rq->dl);
+
+		add_rq_bw(&p->dl, &later_rq->dl);
+		add_running_bw(&p->dl, &later_rq->dl);
+	} else {
+		sub_rq_bw(&p->dl, &rq->dl);
+		add_rq_bw(&p->dl, &later_rq->dl);
+	}
+
+	/*
+	 * And we finally need to fixup root_domain(s) bandwidth accounting,
+	 * since p is still hanging out in the old (now moved to default) root
+	 * domain.
+	 */
+	dl_b = &rq->rd->dl_bw;
+	raw_spin_lock(&dl_b->lock);
+	__dl_sub(dl_b, p->dl.dl_bw, cpumask_weight(rq->rd->span));
+	raw_spin_unlock(&dl_b->lock);
+
+	dl_b = &later_rq->rd->dl_bw;
+	raw_spin_lock(&dl_b->lock);
+	__dl_add(dl_b, p->dl.dl_bw, cpumask_weight(later_rq->rd->span));
+	raw_spin_unlock(&dl_b->lock);
+
 	set_task_cpu(p, later_rq->cpu);
 	double_unlock_balance(later_rq, rq);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 026/185] x86/reboot: Always use NMI fallback when shutdown via reboot vector IPI fails
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (23 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 025/185] sched/deadline: Fix bandwidth accounting at all levels after offline migration Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 027/185] rcu/tree: Call setschedule() gp ktread to SCHED_FIFO outside of atomic region Sasha Levin
                   ` (158 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Grzegorz Halat, Thomas Gleixner, Don Zickus, Sasha Levin

From: Grzegorz Halat <ghalat@redhat.com>

[ Upstream commit 747d5a1bf293dcb33af755a6d285d41b8c1ea010 ]

A reboot request sends an IPI via the reboot vector and waits for all other
CPUs to stop. If one or more CPUs are in critical regions with interrupts
disabled then the IPI is not handled on those CPUs and the shutdown hangs
if native_stop_other_cpus() is called with the wait argument set.

Such a situation can happen when one CPU was stopped within a lock held
section and another CPU is trying to acquire that lock with interrupts
disabled. There are other scenarios which can cause such a lockup as well.

In theory the shutdown should be attempted by an NMI IPI after the timeout
period elapsed. Though the wait loop after sending the reboot vector IPI
prevents this. It checks the wait request argument and the timeout. If wait
is set, which is true for sys_reboot() then it won't fall through to the
NMI shutdown method after the timeout period has finished.

This was an oversight when the NMI shutdown mechanism was added to handle
the 'reboot IPI is not working' situation. The mechanism was added to deal
with stuck panic shutdowns, which do not have the wait request set, so the
'wait request' case was probably not considered.

Remove the wait check from the post reboot vector IPI wait loop and enforce
that the wait loop in the NMI fallback path is invoked even if NMI IPIs are
disabled or the registration of the NMI handler fails. That second wait
loop will then hang if not all CPUs shutdown and the wait argument is set.

[ tglx: Avoid the hard to parse line break in the NMI fallback path,
  	add comments and massage the changelog ]

Fixes: 7d007d21e539 ("x86/reboot: Use NMI to assist in shutting down if IRQ fails")
Signed-off-by: Grzegorz Halat <ghalat@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Don Zickus <dzickus@redhat.com>
Link: https://lkml.kernel.org/r/20190628122813.15500-1-ghalat@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/smp.c | 46 +++++++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 19 deletions(-)

diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 4693e2f3a03ec..f2a749586252e 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -179,6 +179,12 @@ asmlinkage __visible void smp_reboot_interrupt(void)
 	irq_exit();
 }
 
+static int register_stop_handler(void)
+{
+	return register_nmi_handler(NMI_LOCAL, smp_stop_nmi_callback,
+				    NMI_FLAG_FIRST, "smp_stop");
+}
+
 static void native_stop_other_cpus(int wait)
 {
 	unsigned long flags;
@@ -212,39 +218,41 @@ static void native_stop_other_cpus(int wait)
 		apic->send_IPI_allbutself(REBOOT_VECTOR);
 
 		/*
-		 * Don't wait longer than a second if the caller
-		 * didn't ask us to wait.
+		 * Don't wait longer than a second for IPI completion. The
+		 * wait request is not checked here because that would
+		 * prevent an NMI shutdown attempt in case that not all
+		 * CPUs reach shutdown state.
 		 */
 		timeout = USEC_PER_SEC;
-		while (num_online_cpus() > 1 && (wait || timeout--))
+		while (num_online_cpus() > 1 && timeout--)
 			udelay(1);
 	}
-	
-	/* if the REBOOT_VECTOR didn't work, try with the NMI */
-	if ((num_online_cpus() > 1) && (!smp_no_nmi_ipi))  {
-		if (register_nmi_handler(NMI_LOCAL, smp_stop_nmi_callback,
-					 NMI_FLAG_FIRST, "smp_stop"))
-			/* Note: we ignore failures here */
-			/* Hope the REBOOT_IRQ is good enough */
-			goto finish;
-
-		/* sync above data before sending IRQ */
-		wmb();
 
-		pr_emerg("Shutting down cpus with NMI\n");
+	/* if the REBOOT_VECTOR didn't work, try with the NMI */
+	if (num_online_cpus() > 1) {
+		/*
+		 * If NMI IPI is enabled, try to register the stop handler
+		 * and send the IPI. In any case try to wait for the other
+		 * CPUs to stop.
+		 */
+		if (!smp_no_nmi_ipi && !register_stop_handler()) {
+			/* Sync above data before sending IRQ */
+			wmb();
 
-		apic->send_IPI_allbutself(NMI_VECTOR);
+			pr_emerg("Shutting down cpus with NMI\n");
 
+			apic->send_IPI_allbutself(NMI_VECTOR);
+		}
 		/*
-		 * Don't wait longer than a 10 ms if the caller
-		 * didn't ask us to wait.
+		 * Don't wait longer than 10 ms if the caller didn't
+		 * reqeust it. If wait is true, the machine hangs here if
+		 * one or more CPUs do not reach shutdown state.
 		 */
 		timeout = USEC_PER_MSEC * 10;
 		while (num_online_cpus() > 1 && (wait || timeout--))
 			udelay(1);
 	}
 
-finish:
 	local_irq_save(flags);
 	disable_local_APIC();
 	mcheck_cpu_clear(this_cpu_ptr(&cpu_info));
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 027/185] rcu/tree: Call setschedule() gp ktread to SCHED_FIFO outside of atomic region
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (24 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 026/185] x86/reboot: Always use NMI fallback when shutdown via reboot vector IPI fails Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 028/185] x86/apic: Soft disable APIC before initializing it Sasha Levin
                   ` (157 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Juri Lelli, Peter Zijlstra, Dietmar Eggemann, Linus Torvalds,
	Thomas Gleixner, bristot, claudio, lizefan, longman, luca.abeni,
	mathieu.poirier, rostedt, tj, tommaso.cucinotta, Ingo Molnar,
	Sasha Levin

From: Juri Lelli <juri.lelli@redhat.com>

[ Upstream commit 1a763fd7c6335e3122c1cc09576ef6c99ada4267 ]

sched_setscheduler() needs to acquire cpuset_rwsem, but it is currently
called from an invalid (atomic) context by rcu_spawn_gp_kthread().

Fix that by simply moving sched_setscheduler_nocheck() call outside of
the atomic region, as it doesn't actually require to be guarded by
rcu_node lock.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: mathieu.poirier@linaro.org
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-8-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/rcu/tree.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 980ca3ca643fb..32ea75acba144 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -3123,13 +3123,13 @@ static int __init rcu_spawn_gp_kthread(void)
 	t = kthread_create(rcu_gp_kthread, NULL, "%s", rcu_state.name);
 	if (WARN_ONCE(IS_ERR(t), "%s: Could not start grace-period kthread, OOM is now expected behavior\n", __func__))
 		return 0;
+	if (kthread_prio)
+		sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
 	rnp = rcu_get_root();
 	raw_spin_lock_irqsave_rcu_node(rnp, flags);
 	rcu_state.gp_kthread = t;
-	if (kthread_prio) {
+	if (kthread_prio)
 		sp.sched_priority = kthread_prio;
-		sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
-	}
 	raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
 	wake_up_process(t);
 	rcu_spawn_nocb_kthreads();
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 028/185] x86/apic: Soft disable APIC before initializing it
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (25 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 027/185] rcu/tree: Call setschedule() gp ktread to SCHED_FIFO outside of atomic region Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 029/185] ALSA: hda - Show the fatal CORB/RIRB error more clearly Sasha Levin
                   ` (156 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Thomas Gleixner, Peter Zijlstra, Sasha Levin

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit 2640da4cccf5cc613bf26f0998b9e340f4b5f69c ]

If the APIC was already enabled on entry of setup_local_APIC() then
disabling it soft via the SPIV register makes a lot of sense.

That masks all LVT entries and brings it into a well defined state.

Otherwise previously enabled LVTs which are not touched in the setup
function stay unmasked and might surprise the just booting kernel.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105219.068290579@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/apic/apic.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 67d1259e0f7c0..a18d6dd934e55 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1550,6 +1550,14 @@ static void setup_local_APIC(void)
 		return;
 	}
 
+	/*
+	 * If this comes from kexec/kcrash the APIC might be enabled in
+	 * SPIV. Soft disable it before doing further initialization.
+	 */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_SPIV_APIC_ENABLED;
+	apic_write(APIC_SPIV, value);
+
 #ifdef CONFIG_X86_32
 	/* Pound the ESR really hard over the head with a big hammer - mbligh */
 	if (lapic_is_integrated() && apic->disable_esr) {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 029/185] ALSA: hda - Show the fatal CORB/RIRB error more clearly
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (26 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 028/185] x86/apic: Soft disable APIC before initializing it Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 030/185] ALSA: i2c: ak4xxx-adda: Fix a possible null pointer dereference in build_adc_controls() Sasha Levin
                   ` (155 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Takashi Iwai, Sasha Levin

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit dd65f7e19c6961ba6a69f7c925021b7a270cb950 ]

The last fallback of CORB/RIRB communication error recovery is to turn
on the single command mode, and this last resort usually means that
something is really screwed up.  Instead of a normal dev_err(), show
the error more clearly with dev_WARN() with the caller stack trace.

Also, show the bus-reset fallback also as an error, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_controller.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index dd96def48a3a1..1158bcf551488 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -869,10 +869,13 @@ static int azx_rirb_get_response(struct hdac_bus *bus, unsigned int addr,
 	 */
 	if (hbus->allow_bus_reset && !hbus->response_reset && !hbus->in_reset) {
 		hbus->response_reset = 1;
+		dev_err(chip->card->dev,
+			"No response from codec, resetting bus: last cmd=0x%08x\n",
+			bus->last_cmd[addr]);
 		return -EAGAIN; /* give a chance to retry */
 	}
 
-	dev_err(chip->card->dev,
+	dev_WARN(chip->card->dev,
 		"azx_get_response timeout, switching to single_cmd mode: last cmd=0x%08x\n",
 		bus->last_cmd[addr]);
 	chip->single_cmd = 1;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 030/185] ALSA: i2c: ak4xxx-adda: Fix a possible null pointer dereference in build_adc_controls()
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (27 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 029/185] ALSA: hda - Show the fatal CORB/RIRB error more clearly Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 031/185] EDAC/mc: Fix grain_bits calculation Sasha Levin
                   ` (154 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Jia-Ju Bai, Takashi Iwai, Sasha Levin

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 2127c01b7f63b06a21559f56a8c81a3c6535bd1a ]

In build_adc_controls(), there is an if statement on line 773 to check
whether ak->adc_info is NULL:
    if (! ak->adc_info ||
        ! ak->adc_info[mixer_ch].switch_name)

When ak->adc_info is NULL, it is used on line 792:
    knew.name = ak->adc_info[mixer_ch].selector_name;

Thus, a possible null-pointer dereference may occur.

To fix this bug, referring to lines 773 and 774, ak->adc_info
and ak->adc_info[mixer_ch].selector_name are checked before being used.

This bug is found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/i2c/other/ak4xxx-adda.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/sound/i2c/other/ak4xxx-adda.c b/sound/i2c/other/ak4xxx-adda.c
index 5f59316f982ae..7d15093844b92 100644
--- a/sound/i2c/other/ak4xxx-adda.c
+++ b/sound/i2c/other/ak4xxx-adda.c
@@ -775,11 +775,12 @@ static int build_adc_controls(struct snd_akm4xxx *ak)
 				return err;
 
 			memset(&knew, 0, sizeof(knew));
-			knew.name = ak->adc_info[mixer_ch].selector_name;
-			if (!knew.name) {
+			if (!ak->adc_info ||
+				!ak->adc_info[mixer_ch].selector_name) {
 				knew.name = "Capture Channel";
 				knew.index = mixer_ch + ak->idx_offset * 2;
-			}
+			} else
+				knew.name = ak->adc_info[mixer_ch].selector_name;
 
 			knew.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
 			knew.info = ak4xxx_capture_source_info;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 031/185] EDAC/mc: Fix grain_bits calculation
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (28 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 030/185] ALSA: i2c: ak4xxx-adda: Fix a possible null pointer dereference in build_adc_controls() Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 032/185] media: iguanair: add sanity checks Sasha Levin
                   ` (153 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Robert Richter, Borislav Petkov, linux-edac, James Morse,
	Mauro Carvalho Chehab, Tony Luck, Sasha Levin

From: Robert Richter <rrichter@marvell.com>

[ Upstream commit 3724ace582d9f675134985727fd5e9811f23c059 ]

The grain in EDAC is defined as "minimum granularity for an error
report, in bytes". The following calculation of the grain_bits in
edac_mc is wrong:

	grain_bits = fls_long(e->grain) + 1;

Where grain_bits is defined as:

	grain = 1 << grain_bits

Example:

	grain = 8	# 64 bit (8 bytes)
	grain_bits = fls_long(8) + 1
	grain_bits = 4 + 1 = 5

	grain = 1 << grain_bits
	grain = 1 << 5 = 32

Replace it with the correct calculation:

	grain_bits = fls_long(e->grain - 1);

The example gives now:

	grain_bits = fls_long(8 - 1)
	grain_bits = fls_long(7)
	grain_bits = 3

	grain = 1 << 3 = 8

Also, check if the hardware reports a reasonable grain != 0 and fallback
with a warning to 1 byte granularity otherwise.

 [ bp: massage a bit. ]

Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190624150758.6695-2-rrichter@marvell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/edac_mc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 64922c8fa7e3b..d899d86897d06 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -1235,9 +1235,13 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type,
 	if (p > e->location)
 		*(p - 1) = '\0';
 
-	/* Report the error via the trace interface */
-	grain_bits = fls_long(e->grain) + 1;
+	/* Sanity-check driver-supplied grain value. */
+	if (WARN_ON_ONCE(!e->grain))
+		e->grain = 1;
+
+	grain_bits = fls_long(e->grain - 1);
 
+	/* Report the error via the trace interface */
 	if (IS_ENABLED(CONFIG_RAS))
 		trace_mc_event(type, e->msg, e->label, e->error_count,
 			       mci->mc_idx, e->top_layer, e->mid_layer,
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 032/185] media: iguanair: add sanity checks
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (29 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 031/185] EDAC/mc: Fix grain_bits calculation Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 033/185] cpuidle: teo: Allow tick to be stopped if PM QoS is used Sasha Levin
                   ` (152 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Oliver Neukum, syzbot+01a77b82edaa374068e1, Sean Young,
	Mauro Carvalho Chehab, Sasha Levin, linux-media

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit ab1cbdf159beba7395a13ab70bc71180929ca064 ]

The driver needs to check the endpoint types, too, as opposed
to the number of endpoints. This also requires moving the check earlier.

Reported-by: syzbot+01a77b82edaa374068e1@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/iguanair.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/media/rc/iguanair.c b/drivers/media/rc/iguanair.c
index ea05e125016a7..872d6441e512c 100644
--- a/drivers/media/rc/iguanair.c
+++ b/drivers/media/rc/iguanair.c
@@ -413,6 +413,10 @@ static int iguanair_probe(struct usb_interface *intf,
 	int ret, pipein, pipeout;
 	struct usb_host_interface *idesc;
 
+	idesc = intf->altsetting;
+	if (idesc->desc.bNumEndpoints < 2)
+		return -ENODEV;
+
 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
 	rc = rc_allocate_device(RC_DRIVER_IR_RAW);
 	if (!ir || !rc) {
@@ -427,18 +431,13 @@ static int iguanair_probe(struct usb_interface *intf,
 	ir->urb_in = usb_alloc_urb(0, GFP_KERNEL);
 	ir->urb_out = usb_alloc_urb(0, GFP_KERNEL);
 
-	if (!ir->buf_in || !ir->packet || !ir->urb_in || !ir->urb_out) {
+	if (!ir->buf_in || !ir->packet || !ir->urb_in || !ir->urb_out ||
+	    !usb_endpoint_is_int_in(&idesc->endpoint[0].desc) ||
+	    !usb_endpoint_is_int_out(&idesc->endpoint[1].desc)) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
-	idesc = intf->altsetting;
-
-	if (idesc->desc.bNumEndpoints < 2) {
-		ret = -ENODEV;
-		goto out;
-	}
-
 	ir->rc = rc;
 	ir->dev = &intf->dev;
 	ir->udev = udev;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 033/185] cpuidle: teo: Allow tick to be stopped if PM QoS is used
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (30 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 032/185] media: iguanair: add sanity checks Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 034/185] arm64: mm: free the initrd reserved memblock in a aligned manner Sasha Levin
                   ` (151 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Rafael J. Wysocki, Sasha Levin

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit cab09f3d2d2a0a6cb3dfb678660d67a2c3764f50 ]

The TEO goveror prevents the scheduler tick from being stopped (unless
stopped already) if there is a PM QoS latency constraint for the given
CPU and the target residency of the deepest idle state matching that
constraint is below the tick boundary.

However, that is problematic if CPUs with PM QoS latency constraints
are idle for long times, because it effectively causes the tick to
run on them all the time which is wasteful.  [It is also confusing
and questionable if they are full dynticks CPUs.]

To address that issue, modify the TEO governor to carry out the
entire search for the most suitable idle state (from the target
residency perspective) even if a latency constraint is present,
to allow it to determine the expected idle duration in all cases.

Also, when using the last several measured idle duration values
to refine the idle state selection, make it compare those values
with the current expected idle duration value (instead of
comparing them with the target residency of the idle state
selected so far) which should prevent the tick from being
retained when it makes sense to stop it sometimes (especially
in the presence of PM QoS latency constraints).

Fixes: b26bf6ab716f ("cpuidle: New timer events oriented governor for tickless systems")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpuidle/governors/teo.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/cpuidle/governors/teo.c b/drivers/cpuidle/governors/teo.c
index 7d05efdbd3c66..12d9e6cecf1de 100644
--- a/drivers/cpuidle/governors/teo.c
+++ b/drivers/cpuidle/governors/teo.c
@@ -242,7 +242,7 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 	struct teo_cpu *cpu_data = per_cpu_ptr(&teo_cpus, dev->cpu);
 	int latency_req = cpuidle_governor_latency_req(dev->cpu);
 	unsigned int duration_us, count;
-	int max_early_idx, idx, i;
+	int max_early_idx, constraint_idx, idx, i;
 	ktime_t delta_tick;
 
 	if (cpu_data->last_state >= 0) {
@@ -257,6 +257,7 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 
 	count = 0;
 	max_early_idx = -1;
+	constraint_idx = drv->state_count;
 	idx = -1;
 
 	for (i = 0; i < drv->state_count; i++) {
@@ -286,16 +287,8 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 		if (s->target_residency > duration_us)
 			break;
 
-		if (s->exit_latency > latency_req) {
-			/*
-			 * If we break out of the loop for latency reasons, use
-			 * the target residency of the selected state as the
-			 * expected idle duration to avoid stopping the tick
-			 * as long as that target residency is low enough.
-			 */
-			duration_us = drv->states[idx].target_residency;
-			goto refine;
-		}
+		if (s->exit_latency > latency_req && constraint_idx > i)
+			constraint_idx = i;
 
 		idx = i;
 
@@ -321,7 +314,13 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 		duration_us = drv->states[idx].target_residency;
 	}
 
-refine:
+	/*
+	 * If there is a latency constraint, it may be necessary to use a
+	 * shallower idle state than the one selected so far.
+	 */
+	if (constraint_idx < idx)
+		idx = constraint_idx;
+
 	if (idx < 0) {
 		idx = 0; /* No states enabled. Must use 0. */
 	} else if (idx > 0) {
@@ -331,13 +330,12 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 
 		/*
 		 * Count and sum the most recent idle duration values less than
-		 * the target residency of the state selected so far, find the
-		 * max.
+		 * the current expected idle duration value.
 		 */
 		for (i = 0; i < INTERVALS; i++) {
 			unsigned int val = cpu_data->intervals[i];
 
-			if (val >= drv->states[idx].target_residency)
+			if (val >= duration_us)
 				continue;
 
 			count++;
@@ -356,8 +354,10 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 			 * would be too shallow.
 			 */
 			if (!(tick_nohz_tick_stopped() && avg_us < TICK_USEC)) {
-				idx = teo_find_shallower_state(drv, dev, idx, avg_us);
 				duration_us = avg_us;
+				if (drv->states[idx].target_residency > avg_us)
+					idx = teo_find_shallower_state(drv, dev,
+								       idx, avg_us);
 			}
 		}
 	}
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 034/185] arm64: mm: free the initrd reserved memblock in a aligned manner
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (31 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 033/185] cpuidle: teo: Allow tick to be stopped if PM QoS is used Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46   ` Sasha Levin
                   ` (150 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Junhua Huang, Will Deacon, Sasha Levin

From: Junhua Huang <huang.junhua@zte.com.cn>

[ Upstream commit 13776f9d40a028a245bb766269e360f5b7a62721 ]

We should free the initrd reserved memblock in an aligned manner,
because the initrd reserves the memblock in an aligned manner
in arm64_memblock_init().
Otherwise there are some fragments in memblock_reserved regions
after free_initrd_mem(). e.g.:
/sys/kernel/debug/memblock # cat reserved
   0: 0x0000000080080000..0x00000000817fafff
   1: 0x0000000083400000..0x0000000083ffffff
   2: 0x0000000090000000..0x000000009000407f
   3: 0x00000000b0000000..0x00000000b000003f
   4: 0x00000000b26184ea..0x00000000b2618fff
The fragments like the ranges from b0000000 to b000003f and
from b26184ea to b2618fff should be freed.

And we can do free_reserved_area() after memblock_free(),
as free_reserved_area() calls __free_pages(), once we've done
that it could be allocated somewhere else,
but memblock and iomem still say this is reserved memory.

Fixes: 05c58752f9dc ("arm64: To remove initrd reserved area entry from memblock")
Signed-off-by: Junhua Huang <huang.junhua@zte.com.cn>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/mm/init.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index f3c795278def0..b1ee6cb4b17fc 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -570,8 +570,12 @@ void free_initmem(void)
 #ifdef CONFIG_BLK_DEV_INITRD
 void __init free_initrd_mem(unsigned long start, unsigned long end)
 {
+	unsigned long aligned_start, aligned_end;
+
+	aligned_start = __virt_to_phys(start) & PAGE_MASK;
+	aligned_end = PAGE_ALIGN(__virt_to_phys(end));
+	memblock_free(aligned_start, aligned_end - aligned_start);
 	free_reserved_area((void *)start, (void *)end, 0, "initrd");
-	memblock_free(__virt_to_phys(start), end - start);
 }
 #endif
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 035/185] soc: amlogic: meson-clk-measure: protect measure with a mutex
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:46   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Sasha Levin,
	linux-amlogic

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 3a760d986568b67d1f8411dab64608075817b90d ]

In order to protect clock measuring when multiple process asks for
a measure, protect the main measure function with mutexes.

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/amlogic/meson-clk-measure.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/amlogic/meson-clk-measure.c b/drivers/soc/amlogic/meson-clk-measure.c
index 19d4cbc93a17a..c470e24f1dfa6 100644
--- a/drivers/soc/amlogic/meson-clk-measure.c
+++ b/drivers/soc/amlogic/meson-clk-measure.c
@@ -11,6 +11,8 @@
 #include <linux/debugfs.h>
 #include <linux/regmap.h>
 
+static DEFINE_MUTEX(measure_lock);
+
 #define MSR_CLK_DUTY		0x0
 #define MSR_CLK_REG0		0x4
 #define MSR_CLK_REG1		0x8
@@ -360,6 +362,10 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
 	unsigned int val;
 	int ret;
 
+	ret = mutex_lock_interruptible(&measure_lock);
+	if (ret)
+		return ret;
+
 	regmap_write(priv->regmap, MSR_CLK_REG0, 0);
 
 	/* Set measurement duration */
@@ -377,8 +383,10 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
 
 	ret = regmap_read_poll_timeout(priv->regmap, MSR_CLK_REG0,
 				       val, !(val & MSR_BUSY), 10, 10000);
-	if (ret)
+	if (ret) {
+		mutex_unlock(&measure_lock);
 		return ret;
+	}
 
 	/* Disable */
 	regmap_update_bits(priv->regmap, MSR_CLK_REG0, MSR_ENABLE, 0);
@@ -386,6 +394,8 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
 	/* Get the value in multiple of gate time counts */
 	regmap_read(priv->regmap, MSR_CLK_REG2, &val);
 
+	mutex_unlock(&measure_lock);
+
 	if (val >= MSR_VAL_MASK)
 		return -EINVAL;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 035/185] soc: amlogic: meson-clk-measure: protect measure with a mutex
@ 2019-09-22 18:46   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Martin Blumenstingl, Kevin Hilman, linux-amlogic, Sasha Levin,
	Neil Armstrong

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 3a760d986568b67d1f8411dab64608075817b90d ]

In order to protect clock measuring when multiple process asks for
a measure, protect the main measure function with mutexes.

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/amlogic/meson-clk-measure.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/amlogic/meson-clk-measure.c b/drivers/soc/amlogic/meson-clk-measure.c
index 19d4cbc93a17a..c470e24f1dfa6 100644
--- a/drivers/soc/amlogic/meson-clk-measure.c
+++ b/drivers/soc/amlogic/meson-clk-measure.c
@@ -11,6 +11,8 @@
 #include <linux/debugfs.h>
 #include <linux/regmap.h>
 
+static DEFINE_MUTEX(measure_lock);
+
 #define MSR_CLK_DUTY		0x0
 #define MSR_CLK_REG0		0x4
 #define MSR_CLK_REG1		0x8
@@ -360,6 +362,10 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
 	unsigned int val;
 	int ret;
 
+	ret = mutex_lock_interruptible(&measure_lock);
+	if (ret)
+		return ret;
+
 	regmap_write(priv->regmap, MSR_CLK_REG0, 0);
 
 	/* Set measurement duration */
@@ -377,8 +383,10 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
 
 	ret = regmap_read_poll_timeout(priv->regmap, MSR_CLK_REG0,
 				       val, !(val & MSR_BUSY), 10, 10000);
-	if (ret)
+	if (ret) {
+		mutex_unlock(&measure_lock);
 		return ret;
+	}
 
 	/* Disable */
 	regmap_update_bits(priv->regmap, MSR_CLK_REG0, MSR_ENABLE, 0);
@@ -386,6 +394,8 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
 	/* Get the value in multiple of gate time counts */
 	regmap_read(priv->regmap, MSR_CLK_REG2, &val);
 
+	mutex_unlock(&measure_lock);
+
 	if (val >= MSR_VAL_MASK)
 		return -EINVAL;
 
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 036/185] base: soc: Export soc_device_register/unregister APIs
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (33 preceding siblings ...)
  2019-09-22 18:46   ` Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 037/185] ALSA: usb-audio: Skip bSynchAddress endpoint check if it is invalid Sasha Levin
                   ` (148 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Vinod Koul, Vaishali Thakkar, Greg Kroah-Hartman, Stephen Boyd,
	Bjorn Andersson, Sasha Levin

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit f7ccc7a397cf2ef64aebb2f726970b93203858d2 ]

Qcom Socinfo driver can be built as a module, so
export these two APIs.

Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/soc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/base/soc.c b/drivers/base/soc.c
index 10b280f30217b..7e91894a380b5 100644
--- a/drivers/base/soc.c
+++ b/drivers/base/soc.c
@@ -157,6 +157,7 @@ struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr
 out1:
 	return ERR_PTR(ret);
 }
+EXPORT_SYMBOL_GPL(soc_device_register);
 
 /* Ensure soc_dev->attr is freed prior to calling soc_device_unregister. */
 void soc_device_unregister(struct soc_device *soc_dev)
@@ -166,6 +167,7 @@ void soc_device_unregister(struct soc_device *soc_dev)
 	device_unregister(&soc_dev->dev);
 	early_soc_dev_attr = NULL;
 }
+EXPORT_SYMBOL_GPL(soc_device_unregister);
 
 static int __init soc_bus_register(void)
 {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 037/185] ALSA: usb-audio: Skip bSynchAddress endpoint check if it is invalid
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (34 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 036/185] base: soc: Export soc_device_register/unregister APIs Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46   ` Sasha Levin
                   ` (147 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Ard van Breemen, Takashi Iwai, Sasha Levin

From: Ard van Breemen <ard@kwaak.net>

[ Upstream commit 1b34121d9f26d272b0b2334209af6b6fc82d4bf1 ]

The Linux kernel assumes that get_endpoint(alts,0) and
get_endpoint(alts,1) are eachothers feedback endpoints.
To reassure that validity it will test bsynchaddress to comply with that
assumption. But if the bsyncaddress is 0 (invalid), it will flag that as
a wrong assumption and return an error.
Fix: Skip the test if bSynchAddress is 0.
Note: those with a valid bSynchAddress should have a code quirck added.

Signed-off-by: Ard van Breemen <ard@kwaak.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/pcm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index e4bbf79de956e..33cd26763c0ee 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -457,6 +457,7 @@ static int set_sync_endpoint(struct snd_usb_substream *subs,
 	}
 	ep = get_endpoint(alts, 1)->bEndpointAddress;
 	if (get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
+	    get_endpoint(alts, 0)->bSynchAddress != 0 &&
 	    ((is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress | USB_DIR_IN)) ||
 	     (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)))) {
 		dev_err(&dev->dev,
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 038/185] ia64:unwind: fix double free for mod->arch.init_unw_table
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:46   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: chenzefeng, Tony Luck, Sasha Levin, linux-ia64

From: chenzefeng <chenzefeng2@huawei.com>

[ Upstream commit c5e5c48c16422521d363c33cfb0dcf58f88c119b ]

The function free_module in file kernel/module.c as follow:

void free_module(struct module *mod) {
	......
	module_arch_cleanup(mod);
	......
	module_arch_freeing_init(mod);
	......
}

Both module_arch_cleanup and module_arch_freeing_init function
would free the mod->arch.init_unw_table, which cause double free.

Here, set mod->arch.init_unw_table = NULL after remove the unwind
table to avoid double free.

Signed-off-by: chenzefeng <chenzefeng2@huawei.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/kernel/module.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index 326448f9df160..1a42ba885188a 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -914,10 +914,14 @@ module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mo
 void
 module_arch_cleanup (struct module *mod)
 {
-	if (mod->arch.init_unw_table)
+	if (mod->arch.init_unw_table) {
 		unw_remove_unwind_table(mod->arch.init_unw_table);
-	if (mod->arch.core_unw_table)
+		mod->arch.init_unw_table = NULL;
+	}
+	if (mod->arch.core_unw_table) {
 		unw_remove_unwind_table(mod->arch.core_unw_table);
+		mod->arch.core_unw_table = NULL;
+	}
 }
 
 void *dereference_module_function_descriptor(struct module *mod, void *ptr)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 038/185] ia64:unwind: fix double free for mod->arch.init_unw_table
@ 2019-09-22 18:46   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: chenzefeng, Tony Luck, Sasha Levin, linux-ia64

From: chenzefeng <chenzefeng2@huawei.com>

[ Upstream commit c5e5c48c16422521d363c33cfb0dcf58f88c119b ]

The function free_module in file kernel/module.c as follow:

void free_module(struct module *mod) {
	......
	module_arch_cleanup(mod);
	......
	module_arch_freeing_init(mod);
	......
}

Both module_arch_cleanup and module_arch_freeing_init function
would free the mod->arch.init_unw_table, which cause double free.

Here, set mod->arch.init_unw_table = NULL after remove the unwind
table to avoid double free.

Signed-off-by: chenzefeng <chenzefeng2@huawei.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/kernel/module.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index 326448f9df160..1a42ba885188a 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -914,10 +914,14 @@ module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mo
 void
 module_arch_cleanup (struct module *mod)
 {
-	if (mod->arch.init_unw_table)
+	if (mod->arch.init_unw_table) {
 		unw_remove_unwind_table(mod->arch.init_unw_table);
-	if (mod->arch.core_unw_table)
+		mod->arch.init_unw_table = NULL;
+	}
+	if (mod->arch.core_unw_table) {
 		unw_remove_unwind_table(mod->arch.core_unw_table);
+		mod->arch.core_unw_table = NULL;
+	}
 }
 
 void *dereference_module_function_descriptor(struct module *mod, void *ptr)
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 039/185] EDAC/altera: Use the proper type for the IRQ status bits
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:46   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Dan Carpenter, Borislav Petkov, Thor Thayer, James Morse,
	kernel-janitors, linux-edac, Mauro Carvalho Chehab, Tony Luck,
	Sasha Levin

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 8faa1cf6ed82f33009f63986c3776cc48af1b7b2 ]

Smatch complains about the cast of a u32 pointer to unsigned long:

  drivers/edac/altera_edac.c:1878 altr_edac_a10_irq_handler()
  warn: passing casted pointer '&irq_status' to 'find_first_bit()'

This code wouldn't work on a 64 bit big endian system because it would
read past the end of &irq_status.

 [ bp: massage. ]

Fixes: 13ab8448d2c9 ("EDAC, altera: Add ECC Manager IRQ controller support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: James Morse <james.morse@arm.com>
Cc: kernel-janitors@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190624134717.GA1754@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/altera_edac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 8816f74a22b4a..2d12b94eccda2 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1829,6 +1829,7 @@ static void altr_edac_a10_irq_handler(struct irq_desc *desc)
 	struct altr_arria10_edac *edac = irq_desc_get_handler_data(desc);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	int irq = irq_desc_get_irq(desc);
+	unsigned long bits;
 
 	dberr = (irq == edac->db_irq) ? 1 : 0;
 	sm_offset = dberr ? A10_SYSMGR_ECC_INTSTAT_DERR_OFST :
@@ -1838,7 +1839,8 @@ static void altr_edac_a10_irq_handler(struct irq_desc *desc)
 
 	regmap_read(edac->ecc_mgr_map, sm_offset, &irq_status);
 
-	for_each_set_bit(bit, (unsigned long *)&irq_status, 32) {
+	bits = irq_status;
+	for_each_set_bit(bit, &bits, 32) {
 		irq = irq_linear_revmap(edac->domain, dberr * 32 + bit);
 		if (irq)
 			generic_handle_irq(irq);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 039/185] EDAC/altera: Use the proper type for the IRQ status bits
@ 2019-09-22 18:46   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Dan Carpenter, Borislav Petkov, Thor Thayer, James Morse,
	kernel-janitors, linux-edac, Mauro Carvalho Chehab, Tony Luck,
	Sasha Levin

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 8faa1cf6ed82f33009f63986c3776cc48af1b7b2 ]

Smatch complains about the cast of a u32 pointer to unsigned long:

  drivers/edac/altera_edac.c:1878 altr_edac_a10_irq_handler()
  warn: passing casted pointer '&irq_status' to 'find_first_bit()'

This code wouldn't work on a 64 bit big endian system because it would
read past the end of &irq_status.

 [ bp: massage. ]

Fixes: 13ab8448d2c9 ("EDAC, altera: Add ECC Manager IRQ controller support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: James Morse <james.morse@arm.com>
Cc: kernel-janitors@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190624134717.GA1754@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/altera_edac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 8816f74a22b4a..2d12b94eccda2 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1829,6 +1829,7 @@ static void altr_edac_a10_irq_handler(struct irq_desc *desc)
 	struct altr_arria10_edac *edac = irq_desc_get_handler_data(desc);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	int irq = irq_desc_get_irq(desc);
+	unsigned long bits;
 
 	dberr = (irq = edac->db_irq) ? 1 : 0;
 	sm_offset = dberr ? A10_SYSMGR_ECC_INTSTAT_DERR_OFST :
@@ -1838,7 +1839,8 @@ static void altr_edac_a10_irq_handler(struct irq_desc *desc)
 
 	regmap_read(edac->ecc_mgr_map, sm_offset, &irq_status);
 
-	for_each_set_bit(bit, (unsigned long *)&irq_status, 32) {
+	bits = irq_status;
+	for_each_set_bit(bit, &bits, 32) {
 		irq = irq_linear_revmap(edac->domain, dberr * 32 + bit);
 		if (irq)
 			generic_handle_irq(irq);
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 040/185] ASoC: rsnd: don't call clk_get_rate() under atomic context
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (37 preceding siblings ...)
  2019-09-22 18:46   ` Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 041/185] arm64/prefetch: fix a -Wtype-limits warning Sasha Levin
                   ` (144 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Kuninori Morimoto, Leon Kong, Mark Brown, Sasha Levin

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit 06e8f5c842f2dbb232897ba967ea7b422745c271 ]

ADG is using clk_get_rate() under atomic context, thus, we might
have scheduling issue.
To avoid this issue, we need to get/keep clk rate under
non atomic context.

We need to handle ADG as special device at Renesas Sound driver.
From SW point of view, we want to impletent it as
rsnd_mod_ops :: prepare, but it makes code just complicate.

To avoid complicated code/patch, this patch adds new clk_rate[] array,
and keep clk IN rate when rsnd_adg_clk_enable() was called.

Reported-by: Leon Kong <Leon.KONG@cn.bosch.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Leon Kong <Leon.KONG@cn.bosch.com>
Link: https://lore.kernel.org/r/87v9vb0xkp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/adg.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/sound/soc/sh/rcar/adg.c b/sound/soc/sh/rcar/adg.c
index e821ccc70f478..141d9a030c59a 100644
--- a/sound/soc/sh/rcar/adg.c
+++ b/sound/soc/sh/rcar/adg.c
@@ -30,6 +30,7 @@ struct rsnd_adg {
 	struct clk *clkout[CLKOUTMAX];
 	struct clk_onecell_data onecell;
 	struct rsnd_mod mod;
+	int clk_rate[CLKMAX];
 	u32 flags;
 	u32 ckr;
 	u32 rbga;
@@ -113,9 +114,9 @@ static void __rsnd_adg_get_timesel_ratio(struct rsnd_priv *priv,
 	unsigned int val, en;
 	unsigned int min, diff;
 	unsigned int sel_rate[] = {
-		clk_get_rate(adg->clk[CLKA]),	/* 0000: CLKA */
-		clk_get_rate(adg->clk[CLKB]),	/* 0001: CLKB */
-		clk_get_rate(adg->clk[CLKC]),	/* 0010: CLKC */
+		adg->clk_rate[CLKA],	/* 0000: CLKA */
+		adg->clk_rate[CLKB],	/* 0001: CLKB */
+		adg->clk_rate[CLKC],	/* 0010: CLKC */
 		adg->rbga_rate_for_441khz,	/* 0011: RBGA */
 		adg->rbgb_rate_for_48khz,	/* 0100: RBGB */
 	};
@@ -301,7 +302,7 @@ int rsnd_adg_clk_query(struct rsnd_priv *priv, unsigned int rate)
 	 * AUDIO_CLKA/AUDIO_CLKB/AUDIO_CLKC/AUDIO_CLKI.
 	 */
 	for_each_rsnd_clk(clk, adg, i) {
-		if (rate == clk_get_rate(clk))
+		if (rate == adg->clk_rate[i])
 			return sel_table[i];
 	}
 
@@ -368,10 +369,18 @@ void rsnd_adg_clk_control(struct rsnd_priv *priv, int enable)
 
 	for_each_rsnd_clk(clk, adg, i) {
 		ret = 0;
-		if (enable)
+		if (enable) {
 			ret = clk_prepare_enable(clk);
-		else
+
+			/*
+			 * We shouldn't use clk_get_rate() under
+			 * atomic context. Let's keep it when
+			 * rsnd_adg_clk_enable() was called
+			 */
+			adg->clk_rate[i] = clk_get_rate(adg->clk[i]);
+		} else {
 			clk_disable_unprepare(clk);
+		}
 
 		if (ret < 0)
 			dev_warn(dev, "can't use clk %d\n", i);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 041/185] arm64/prefetch: fix a -Wtype-limits warning
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (38 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 040/185] ASoC: rsnd: don't call clk_get_rate() under atomic context Sasha Levin
@ 2019-09-22 18:46 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 042/185] md/raid1: end bio when the device faulty Sasha Levin
                   ` (143 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Qian Cai, Will Deacon, Sasha Levin

From: Qian Cai <cai@lca.pw>

[ Upstream commit b99286b088ea843b935dcfb29f187697359fe5cd ]

The commit d5370f754875 ("arm64: prefetch: add alternative pattern for
CPUs without a prefetcher") introduced MIDR_IS_CPU_MODEL_RANGE() to be
used in has_no_hw_prefetch() with rv_min=0 which generates a compilation
warning from GCC,

In file included from ./arch/arm64/include/asm/cache.h:8,
               from ./include/linux/cache.h:6,
               from ./include/linux/printk.h:9,
               from ./include/linux/kernel.h:15,
               from ./include/linux/cpumask.h:10,
               from arch/arm64/kernel/cpufeature.c:11:
arch/arm64/kernel/cpufeature.c: In function 'has_no_hw_prefetch':
./arch/arm64/include/asm/cputype.h:59:26: warning: comparison of
unsigned expression >= 0 is always true [-Wtype-limits]
_model == (model) && rv >= (rv_min) && rv <= (rv_max);  \
                        ^~
arch/arm64/kernel/cpufeature.c:889:9: note: in expansion of macro
'MIDR_IS_CPU_MODEL_RANGE'
return MIDR_IS_CPU_MODEL_RANGE(midr, MIDR_THUNDERX,
       ^~~~~~~~~~~~~~~~~~~~~~~

Fix it by converting MIDR_IS_CPU_MODEL_RANGE to a static inline
function.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/cputype.h | 21 +++++++++++----------
 arch/arm64/kernel/cpufeature.c   |  2 +-
 2 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index e7d46631cc42b..b1454d117cd2c 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -51,14 +51,6 @@
 #define MIDR_CPU_MODEL_MASK (MIDR_IMPLEMENTOR_MASK | MIDR_PARTNUM_MASK | \
 			     MIDR_ARCHITECTURE_MASK)
 
-#define MIDR_IS_CPU_MODEL_RANGE(midr, model, rv_min, rv_max)		\
-({									\
-	u32 _model = (midr) & MIDR_CPU_MODEL_MASK;			\
-	u32 rv = (midr) & (MIDR_REVISION_MASK | MIDR_VARIANT_MASK);	\
-									\
-	_model == (model) && rv >= (rv_min) && rv <= (rv_max);		\
- })
-
 #define ARM_CPU_IMP_ARM			0x41
 #define ARM_CPU_IMP_APM			0x50
 #define ARM_CPU_IMP_CAVIUM		0x43
@@ -159,10 +151,19 @@ struct midr_range {
 #define MIDR_REV(m, v, r) MIDR_RANGE(m, v, r, v, r)
 #define MIDR_ALL_VERSIONS(m) MIDR_RANGE(m, 0, 0, 0xf, 0xf)
 
+static inline bool midr_is_cpu_model_range(u32 midr, u32 model, u32 rv_min,
+					   u32 rv_max)
+{
+	u32 _model = midr & MIDR_CPU_MODEL_MASK;
+	u32 rv = midr & (MIDR_REVISION_MASK | MIDR_VARIANT_MASK);
+
+	return _model == model && rv >= rv_min && rv <= rv_max;
+}
+
 static inline bool is_midr_in_range(u32 midr, struct midr_range const *range)
 {
-	return MIDR_IS_CPU_MODEL_RANGE(midr, range->model,
-				 range->rv_min, range->rv_max);
+	return midr_is_cpu_model_range(midr, range->model,
+				       range->rv_min, range->rv_max);
 }
 
 static inline bool
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 68faf535f40a3..d3fbb89a31e57 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -894,7 +894,7 @@ static bool has_no_hw_prefetch(const struct arm64_cpu_capabilities *entry, int _
 	u32 midr = read_cpuid_id();
 
 	/* Cavium ThunderX pass 1.x and 2.x */
-	return MIDR_IS_CPU_MODEL_RANGE(midr, MIDR_THUNDERX,
+	return midr_is_cpu_model_range(midr, MIDR_THUNDERX,
 		MIDR_CPU_VAR_REV(0, 0),
 		MIDR_CPU_VAR_REV(1, MIDR_REVISION_MASK));
 }
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 042/185] md/raid1: end bio when the device faulty
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (39 preceding siblings ...)
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 041/185] arm64/prefetch: fix a -Wtype-limits warning Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 043/185] md: don't call spare_active in md_reap_sync_thread if all member devices can't work Sasha Levin
                   ` (142 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Yufen Yu, Song Liu, Sasha Levin, linux-raid

From: Yufen Yu <yuyufen@huawei.com>

[ Upstream commit eeba6809d8d58908b5ed1b5ceb5fcb09a98a7cad ]

When write bio return error, it would be added to conf->retry_list
and wait for raid1d thread to retry write and acknowledge badblocks.

In narrow_write_error(), the error bio will be split in the unit of
badblock shift (such as one sector) and raid1d thread issues them
one by one. Until all of the splited bio has finished, raid1d thread
can go on processing other things, which is time consuming.

But, there is a scene for error handling that is not necessary.
When the device has been set faulty, flush_bio_list() may end
bios in pending_bio_list with error status. Since these bios
has not been issued to the device actually, error handlding to
retry write and acknowledge badblocks make no sense.

Even without that scene, when the device is faulty, badblocks info
can not be written out to the device. Thus, we also no need to
handle the error IO.

Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid1.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 2aa36e570e049..a26731a9b38e7 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -426,19 +426,21 @@ static void raid1_end_write_request(struct bio *bio)
 		    /* We never try FailFast to WriteMostly devices */
 		    !test_bit(WriteMostly, &rdev->flags)) {
 			md_error(r1_bio->mddev, rdev);
-			if (!test_bit(Faulty, &rdev->flags))
-				/* This is the only remaining device,
-				 * We need to retry the write without
-				 * FailFast
-				 */
-				set_bit(R1BIO_WriteError, &r1_bio->state);
-			else {
-				/* Finished with this branch */
-				r1_bio->bios[mirror] = NULL;
-				to_put = bio;
-			}
-		} else
+		}
+
+		/*
+		 * When the device is faulty, it is not necessary to
+		 * handle write error.
+		 * For failfast, this is the only remaining device,
+		 * We need to retry the write without FailFast.
+		 */
+		if (!test_bit(Faulty, &rdev->flags))
 			set_bit(R1BIO_WriteError, &r1_bio->state);
+		else {
+			/* Finished with this branch */
+			r1_bio->bios[mirror] = NULL;
+			to_put = bio;
+		}
 	} else {
 		/*
 		 * Set R1BIO_Uptodate in our master bio, so that we
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 043/185] md: don't call spare_active in md_reap_sync_thread if all member devices can't work
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (40 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 042/185] md/raid1: end bio when the device faulty Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 044/185] md: don't set In_sync if array is frozen Sasha Levin
                   ` (141 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Guoqing Jiang, Guoqing Jiang, Song Liu, Sasha Levin, linux-raid

From: Guoqing Jiang <jgq516@gmail.com>

[ Upstream commit 0d8ed0e9bf9643f27f4816dca61081784dedb38d ]

When add one disk to array, the md_reap_sync_thread is responsible
to activate the spare and set In_sync flag for the new member in
spare_active().

But if raid1 has one member disk A, and disk B is added to the array.
Then we offline A before all the datas are synchronized from A to B,
obviously B doesn't have the latest data as A, but B is still marked
with In_sync flag.

So let's not call spare_active under the condition, otherwise B is
still showed with 'U' state which is not correct.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 9801d540fea1c..5e885b6c4240d 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -8944,7 +8944,8 @@ void md_reap_sync_thread(struct mddev *mddev)
 	/* resync has finished, collect result */
 	md_unregister_thread(&mddev->sync_thread);
 	if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
-	    !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
+	    !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) &&
+	    mddev->degraded != mddev->raid_disks) {
 		/* success...*/
 		/* activate any spares */
 		if (mddev->pers->spare_active(mddev)) {
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 044/185] md: don't set In_sync if array is frozen
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (41 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 043/185] md: don't call spare_active in md_reap_sync_thread if all member devices can't work Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 045/185] media: media/platform: fsl-viu.c: fix build for MICROBLAZE Sasha Levin
                   ` (140 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Guoqing Jiang, Guoqing Jiang, Song Liu, Sasha Levin, linux-raid

From: Guoqing Jiang <jgq516@gmail.com>

[ Upstream commit 062f5b2ae12a153644c765e7ba3b0f825427be1d ]

When a disk is added to array, the following path is called in mdadm.

Manage_subdevs -> sysfs_freeze_array
               -> Manage_add
               -> sysfs_set_str(&info, NULL, "sync_action","idle")

Then from kernel side, Manage_add invokes the path (add_new_disk ->
validate_super = super_1_validate) to set In_sync flag.

Since In_sync means "device is in_sync with rest of array", and the new
added disk need to resync thread to help the synchronization of data.
And md_reap_sync_thread would call spare_active to set In_sync for the
new added disk finally. So don't set In_sync if array is in frozen.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 5e885b6c4240d..b3bfac5f2bdb6 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1754,8 +1754,15 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
 				if (!(le32_to_cpu(sb->feature_map) &
 				      MD_FEATURE_RECOVERY_BITMAP))
 					rdev->saved_raid_disk = -1;
-			} else
-				set_bit(In_sync, &rdev->flags);
+			} else {
+				/*
+				 * If the array is FROZEN, then the device can't
+				 * be in_sync with rest of array.
+				 */
+				if (!test_bit(MD_RECOVERY_FROZEN,
+					      &mddev->recovery))
+					set_bit(In_sync, &rdev->flags);
+			}
 			rdev->raid_disk = role;
 			break;
 		}
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 045/185] media: media/platform: fsl-viu.c: fix build for MICROBLAZE
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (42 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 044/185] md: don't set In_sync if array is frozen Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 046/185] RAS: Fix prototype warnings Sasha Levin
                   ` (139 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Randy Dunlap, Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin,
	linux-media

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 6898dd580a045341f844862ceb775144156ec1af ]

arch/microblaze/ defines out_be32() and in_be32(), so don't do that
again in the driver source.

Fixes these build warnings:

../drivers/media/platform/fsl-viu.c:36: warning: "out_be32" redefined
../arch/microblaze/include/asm/io.h:50: note: this is the location of the previous definition
../drivers/media/platform/fsl-viu.c:37: warning: "in_be32" redefined
../arch/microblaze/include/asm/io.h:53: note: this is the location of the previous definition

Fixes: 29d750686331 ("media: fsl-viu: allow building it with COMPILE_TEST")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/fsl-viu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/fsl-viu.c b/drivers/media/platform/fsl-viu.c
index 691be788e38b3..b74e4f50d7d9f 100644
--- a/drivers/media/platform/fsl-viu.c
+++ b/drivers/media/platform/fsl-viu.c
@@ -32,7 +32,7 @@
 #define VIU_VERSION		"0.5.1"
 
 /* Allow building this driver with COMPILE_TEST */
-#ifndef CONFIG_PPC
+#if !defined(CONFIG_PPC) && !defined(CONFIG_MICROBLAZE)
 #define out_be32(v, a)	iowrite32be(a, (void __iomem *)v)
 #define in_be32(a)	ioread32be((void __iomem *)a)
 #endif
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 046/185] RAS: Fix prototype warnings
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (43 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 045/185] media: media/platform: fsl-viu.c: fix build for MICROBLAZE Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47   ` Sasha Levin
                   ` (138 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Valdis Klētnieks, Borislav Petkov, Tony Luck, linux-edac,
	x86, Sasha Levin

From: Valdis Klētnieks <valdis.kletnieks@vt.edu>

[ Upstream commit 0a54b809a3a2c31e1055b45b03708eb730222be1 ]

When building with C=2 and/or W=1, legitimate warnings are issued about
missing prototypes:

    CHECK   drivers/ras/debugfs.c
  drivers/ras/debugfs.c:4:15: warning: symbol 'ras_debugfs_dir' was not declared. Should it be static?
  drivers/ras/debugfs.c:8:5: warning: symbol 'ras_userspace_consumers' was not declared. Should it be static?
  drivers/ras/debugfs.c:38:12: warning: symbol 'ras_add_daemon_trace' was not declared. Should it be static?
  drivers/ras/debugfs.c:54:13: warning: symbol 'ras_debugfs_init' was not declared. Should it be static?
    CC      drivers/ras/debugfs.o
  drivers/ras/debugfs.c:8:5: warning: no previous prototype for 'ras_userspace_consumers' [-Wmissing-prototypes]
      8 | int ras_userspace_consumers(void)
        |     ^~~~~~~~~~~~~~~~~~~~~~~
  drivers/ras/debugfs.c:38:12: warning: no previous prototype for 'ras_add_daemon_trace' [-Wmissing-prototypes]
     38 | int __init ras_add_daemon_trace(void)
        |            ^~~~~~~~~~~~~~~~~~~~
  drivers/ras/debugfs.c:54:13: warning: no previous prototype for 'ras_debugfs_init' [-Wmissing-prototypes]
     54 | void __init ras_debugfs_init(void)
        |             ^~~~~~~~~~~~~~~~

Provide the proper includes.

 [ bp: Take care of the same warnings for cec.c too. ]

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/7168.1565218769@turing-police
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ras/cec.c     | 1 +
 drivers/ras/debugfs.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/ras/cec.c b/drivers/ras/cec.c
index f5795adc5a6e1..8037c490f3ba7 100644
--- a/drivers/ras/cec.c
+++ b/drivers/ras/cec.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/mm.h>
 #include <linux/gfp.h>
+#include <linux/ras.h>
 #include <linux/kernel.h>
 #include <linux/workqueue.h>
 
diff --git a/drivers/ras/debugfs.c b/drivers/ras/debugfs.c
index 9c1b717efad86..0d4f985afbf37 100644
--- a/drivers/ras/debugfs.c
+++ b/drivers/ras/debugfs.c
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 #include <linux/debugfs.h>
+#include <linux/ras.h>
+#include "debugfs.h"
 
 struct dentry *ras_debugfs_dir;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 047/185] RAS: Build debugfs.o only when enabled in Kconfig
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:47   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Valdis Kletnieks, kbuild test robot, Borislav Petkov, Tony Luck,
	linux-edac, x86, Sasha Levin, linux-riscv

From: Valdis Kletnieks <valdis.kletnieks@vt.edu>

[ Upstream commit b6ff24f7b5101101ff897dfdde3f37924e676bc2 ]

In addition, the 0day bot reported this build error:

  >> drivers/ras/debugfs.c:10:5: error: redefinition of 'ras_userspace_consumers'
      int ras_userspace_consumers(void)
          ^~~~~~~~~~~~~~~~~~~~~~~
     In file included from drivers/ras/debugfs.c:3:0:
     include/linux/ras.h:14:19: note: previous definition of 'ras_userspace_consumers' was here
      static inline int ras_userspace_consumers(void) { return 0; }
                      ^~~~~~~~~~~~~~~~~~~~~~~

for a riscv-specific .config where CONFIG_DEBUG_FS is not set. Fix all
that by making debugfs.o depend on that define.

 [ bp: Rewrite commit message. ]

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/7053.1565218556@turing-police
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ras/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/ras/Makefile b/drivers/ras/Makefile
index ef6777e14d3df..6f0404f501071 100644
--- a/drivers/ras/Makefile
+++ b/drivers/ras/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_RAS)	+= ras.o debugfs.o
+obj-$(CONFIG_RAS)	+= ras.o
+obj-$(CONFIG_DEBUG_FS)	+= debugfs.o
 obj-$(CONFIG_RAS_CEC)	+= cec.o
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 047/185] RAS: Build debugfs.o only when enabled in Kconfig
@ 2019-09-22 18:47   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Tony Luck, Valdis Kletnieks, kbuild test robot, x86,
	linux-riscv, Borislav Petkov, linux-edac

From: Valdis Kletnieks <valdis.kletnieks@vt.edu>

[ Upstream commit b6ff24f7b5101101ff897dfdde3f37924e676bc2 ]

In addition, the 0day bot reported this build error:

  >> drivers/ras/debugfs.c:10:5: error: redefinition of 'ras_userspace_consumers'
      int ras_userspace_consumers(void)
          ^~~~~~~~~~~~~~~~~~~~~~~
     In file included from drivers/ras/debugfs.c:3:0:
     include/linux/ras.h:14:19: note: previous definition of 'ras_userspace_consumers' was here
      static inline int ras_userspace_consumers(void) { return 0; }
                      ^~~~~~~~~~~~~~~~~~~~~~~

for a riscv-specific .config where CONFIG_DEBUG_FS is not set. Fix all
that by making debugfs.o depend on that define.

 [ bp: Rewrite commit message. ]

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/7053.1565218556@turing-police
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ras/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/ras/Makefile b/drivers/ras/Makefile
index ef6777e14d3df..6f0404f501071 100644
--- a/drivers/ras/Makefile
+++ b/drivers/ras/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_RAS)	+= ras.o debugfs.o
+obj-$(CONFIG_RAS)	+= ras.o
+obj-$(CONFIG_DEBUG_FS)	+= debugfs.o
 obj-$(CONFIG_RAS_CEC)	+= cec.o
-- 
2.20.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 048/185] ASoC: hdac_hda: fix page fault issue by removing race
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (45 preceding siblings ...)
  2019-09-22 18:47   ` Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 049/185] ACPI / processor: don't print errors for processorIDs == 0xff Sasha Levin
                   ` (136 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Keyon Jie, Pierre-Louis Bossart, Mark Brown, Sasha Levin

From: Keyon Jie <yang.jie@linux.intel.com>

[ Upstream commit 804cbf4bb063204ca6c2471baa694548aab02ce3 ]

There is a race between hda codec device removing and the
jack-detecting work, which will lead to a page fault issue as the
latter work is accessing codec device which could be already removed.

Here add the cancellation of jack-detecting work before codecs are actually
removed to avoid the race and fix the issue.

Bug: https://github.com/thesofproject/linux/issues/1067
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190807145030.26117-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/hdac_hda.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/codecs/hdac_hda.c b/sound/soc/codecs/hdac_hda.c
index 7d49402569149..91242b6f8ea7a 100644
--- a/sound/soc/codecs/hdac_hda.c
+++ b/sound/soc/codecs/hdac_hda.c
@@ -495,6 +495,10 @@ static int hdac_hda_dev_probe(struct hdac_device *hdev)
 
 static int hdac_hda_dev_remove(struct hdac_device *hdev)
 {
+	struct hdac_hda_priv *hda_pvt;
+
+	hda_pvt = dev_get_drvdata(&hdev->dev);
+	cancel_delayed_work_sync(&hda_pvt->codec.jackpoll_work);
 	return 0;
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 049/185] ACPI / processor: don't print errors for processorIDs == 0xff
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (46 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 048/185] ASoC: hdac_hda: fix page fault issue by removing race Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 050/185] loop: Add LOOP_SET_DIRECT_IO to compat ioctl Sasha Levin
                   ` (135 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jiri Slaby, Rafael J . Wysocki, Sasha Levin, linux-acpi

From: Jiri Slaby <jslaby@suse.cz>

[ Upstream commit 2c2b005f549544c13ef4cfb0e4842949066889bc ]

Some platforms define their processors in this manner:
    Device (SCK0)
    {
	Name (_HID, "ACPI0004" /* Module Device */)  // _HID: Hardware ID
	Name (_UID, "CPUSCK0")  // _UID: Unique ID
	Processor (CP00, 0x00, 0x00000410, 0x06){}
	Processor (CP01, 0x02, 0x00000410, 0x06){}
	Processor (CP02, 0x04, 0x00000410, 0x06){}
	Processor (CP03, 0x06, 0x00000410, 0x06){}
	Processor (CP04, 0x01, 0x00000410, 0x06){}
	Processor (CP05, 0x03, 0x00000410, 0x06){}
	Processor (CP06, 0x05, 0x00000410, 0x06){}
	Processor (CP07, 0x07, 0x00000410, 0x06){}
	Processor (CP08, 0xFF, 0x00000410, 0x06){}
	Processor (CP09, 0xFF, 0x00000410, 0x06){}
	Processor (CP0A, 0xFF, 0x00000410, 0x06){}
	Processor (CP0B, 0xFF, 0x00000410, 0x06){}
...

The processors marked as 0xff are invalid, there are only 8 of them in
this case.

So do not print an error on ids == 0xff, just print an info message.
Actually, we could return ENODEV even on the first CPU with ID 0xff, but
ACPI spec does not forbid the 0xff value to be a processor ID. Given
0xff could be a correct one, we would break working systems if we
returned ENODEV.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpi_processor.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index 24f065114d424..2c4dda0787e84 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -279,9 +279,13 @@ static int acpi_processor_get_info(struct acpi_device *device)
 	}
 
 	if (acpi_duplicate_processor_id(pr->acpi_id)) {
-		dev_err(&device->dev,
-			"Failed to get unique processor _UID (0x%x)\n",
-			pr->acpi_id);
+		if (pr->acpi_id == 0xff)
+			dev_info_once(&device->dev,
+				"Entry not well-defined, consider updating BIOS\n");
+		else
+			dev_err(&device->dev,
+				"Failed to get unique processor _UID (0x%x)\n",
+				pr->acpi_id);
 		return -ENODEV;
 	}
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 050/185] loop: Add LOOP_SET_DIRECT_IO to compat ioctl
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (47 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 049/185] ACPI / processor: don't print errors for processorIDs == 0xff Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 051/185] perf tools: Fix paths in include statements Sasha Levin
                   ` (134 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Alessio Balsini, Jens Axboe, Sasha Levin, linux-block

From: Alessio Balsini <balsini@android.com>

[ Upstream commit fdbe4eeeb1aac219b14f10c0ed31ae5d1123e9b8 ]

Enabling Direct I/O with loop devices helps reducing memory usage by
avoiding double caching.  32 bit applications running on 64 bits systems
are currently not able to request direct I/O because is missing from the
lo_compat_ioctl.

This patch fixes the compatibility issue mentioned above by exporting
LOOP_SET_DIRECT_IO as additional lo_compat_ioctl() entry.
The input argument for this ioctl is a single long converted to a 1-bit
boolean, so compatibility is preserved.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/loop.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index e1739efca37eb..8e32930f65a1d 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1763,6 +1763,7 @@ static int lo_compat_ioctl(struct block_device *bdev, fmode_t mode,
 	case LOOP_SET_FD:
 	case LOOP_CHANGE_FD:
 	case LOOP_SET_BLOCK_SIZE:
+	case LOOP_SET_DIRECT_IO:
 		err = lo_ioctl(bdev, mode, cmd, arg);
 		break;
 	default:
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 051/185] perf tools: Fix paths in include statements
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (48 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 050/185] loop: Add LOOP_SET_DIRECT_IO to compat ioctl Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 052/185] EDAC, pnd2: Fix ioremap() size in dnv_rd_reg() Sasha Levin
                   ` (133 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Luke Mujica, Alexander Shishkin, Ian Rogers, Jiri Olsa,
	Peter Zijlstra, Stephane Eranian, Arnaldo Carvalho de Melo,
	Sasha Levin

From: Luke Mujica <lukemujica@google.com>

[ Upstream commit 2b75863b0845764529e01014a5c90664d8044cbe ]

These paths point to the wrong location but still work because they get
picked up by a -I flag that happens to direct to the correct file. Fix
paths to lead to the actual file location without help from include
flags.

Signed-off-by: Luke Mujica <lukemujica@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190719202253.220261-1-lukemujica@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/arch/x86/util/kvm-stat.c | 4 ++--
 tools/perf/arch/x86/util/tsc.c      | 6 +++---
 tools/perf/ui/helpline.c            | 4 ++--
 tools/perf/ui/util.c                | 2 +-
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/tools/perf/arch/x86/util/kvm-stat.c b/tools/perf/arch/x86/util/kvm-stat.c
index 865a9762f22ef..3f84403c0983a 100644
--- a/tools/perf/arch/x86/util/kvm-stat.c
+++ b/tools/perf/arch/x86/util/kvm-stat.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <errno.h>
-#include "../../util/kvm-stat.h"
-#include "../../util/evsel.h"
+#include "../../../util/kvm-stat.h"
+#include "../../../util/evsel.h"
 #include <asm/svm.h>
 #include <asm/vmx.h>
 #include <asm/kvm.h>
diff --git a/tools/perf/arch/x86/util/tsc.c b/tools/perf/arch/x86/util/tsc.c
index 950539f9a4f77..b1eb963b4a6e1 100644
--- a/tools/perf/arch/x86/util/tsc.c
+++ b/tools/perf/arch/x86/util/tsc.c
@@ -5,10 +5,10 @@
 #include <linux/stddef.h>
 #include <linux/perf_event.h>
 
-#include "../../perf.h"
+#include "../../../perf.h"
 #include <linux/types.h>
-#include "../../util/debug.h"
-#include "../../util/tsc.h"
+#include "../../../util/debug.h"
+#include "../../../util/tsc.h"
 
 int perf_read_tsc_conversion(const struct perf_event_mmap_page *pc,
 			     struct perf_tsc_conversion *tc)
diff --git a/tools/perf/ui/helpline.c b/tools/perf/ui/helpline.c
index b3c421429ed44..54bcd08df87e3 100644
--- a/tools/perf/ui/helpline.c
+++ b/tools/perf/ui/helpline.c
@@ -3,10 +3,10 @@
 #include <stdlib.h>
 #include <string.h>
 
-#include "../debug.h"
+#include "../util/debug.h"
 #include "helpline.h"
 #include "ui.h"
-#include "../util.h"
+#include "../util/util.h"
 
 char ui_helpline__current[512];
 
diff --git a/tools/perf/ui/util.c b/tools/perf/ui/util.c
index 63bf06e80ab9d..9ed76e88a3e4c 100644
--- a/tools/perf/ui/util.c
+++ b/tools/perf/ui/util.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "util.h"
-#include "../debug.h"
+#include "../util/debug.h"
 
 
 /*
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 052/185] EDAC, pnd2: Fix ioremap() size in dnv_rd_reg()
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (49 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 051/185] perf tools: Fix paths in include statements Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 053/185] efi: cper: print AER info of PCIe fatal error Sasha Levin
                   ` (132 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Stephen Douthit, Tony Luck, Sasha Levin, linux-edac

From: Stephen Douthit <stephend@silicom-usa.com>

[ Upstream commit 29a3388bfcce7a6d087051376ea02bf8326a957b ]

Depending on how BIOS has marked the reserved region containing the 32KB
MCHBAR you can get warnings like:

resource sanity check: requesting [mem 0xfed10000-0xfed1ffff], which spans more than reserved [mem 0xfed10000-0xfed17fff]
caller dnv_rd_reg+0xc8/0x240 [pnd2_edac] mapping multiple BARs

Not all of the mmio regions used in dnv_rd_reg() are the same size.  The
MCHBAR window is 32KB and the sideband ports are 64KB.  Pass the correct
size to ioremap() depending on which resource we're reading from.

Signed-off-by: Stephen Douthit <stephend@silicom-usa.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/pnd2_edac.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/pnd2_edac.c b/drivers/edac/pnd2_edac.c
index ca25f8fe57ef3..1ad538baaa4a9 100644
--- a/drivers/edac/pnd2_edac.c
+++ b/drivers/edac/pnd2_edac.c
@@ -260,11 +260,14 @@ static u64 get_sideband_reg_base_addr(void)
 	}
 }
 
+#define DNV_MCHBAR_SIZE  0x8000
+#define DNV_SB_PORT_SIZE 0x10000
 static int dnv_rd_reg(int port, int off, int op, void *data, size_t sz, char *name)
 {
 	struct pci_dev *pdev;
 	char *base;
 	u64 addr;
+	unsigned long size;
 
 	if (op == 4) {
 		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x1980, NULL);
@@ -279,15 +282,17 @@ static int dnv_rd_reg(int port, int off, int op, void *data, size_t sz, char *na
 			addr = get_mem_ctrl_hub_base_addr();
 			if (!addr)
 				return -ENODEV;
+			size = DNV_MCHBAR_SIZE;
 		} else {
 			/* MMIO via sideband register base address */
 			addr = get_sideband_reg_base_addr();
 			if (!addr)
 				return -ENODEV;
 			addr += (port << 16);
+			size = DNV_SB_PORT_SIZE;
 		}
 
-		base = ioremap((resource_size_t)addr, 0x10000);
+		base = ioremap((resource_size_t)addr, size);
 		if (!base)
 			return -ENODEV;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 053/185] efi: cper: print AER info of PCIe fatal error
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (50 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 052/185] EDAC, pnd2: Fix ioremap() size in dnv_rd_reg() Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47   ` Sasha Levin
                   ` (131 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Xiaofei Tan, James Morse, Ard Biesheuvel, Sasha Levin, linux-efi

From: Xiaofei Tan <tanxiaofei@huawei.com>

[ Upstream commit b194a77fcc4001dc40aecdd15d249648e8a436d1 ]

AER info of PCIe fatal error is not printed in the current driver.
Because APEI driver will panic directly for fatal error, and can't
run to the place of printing AER info.

An example log is as following:
{763}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 11
{763}[Hardware Error]: event severity: fatal
{763}[Hardware Error]:  Error 0, type: fatal
{763}[Hardware Error]:   section_type: PCIe error
{763}[Hardware Error]:   port_type: 0, PCIe end point
{763}[Hardware Error]:   version: 4.0
{763}[Hardware Error]:   command: 0x0000, status: 0x0010
{763}[Hardware Error]:   device_id: 0000:82:00.0
{763}[Hardware Error]:   slot: 0
{763}[Hardware Error]:   secondary_bus: 0x00
{763}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x10fb
{763}[Hardware Error]:   class_code: 000002
Kernel panic - not syncing: Fatal hardware error!

This issue was imported by the patch, '37448adfc7ce ("aerdrv: Move
cper_print_aer() call out of interrupt context")'. To fix this issue,
this patch adds print of AER info in cper_print_pcie() for fatal error.

Here is the example log after this patch applied:
{24}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 10
{24}[Hardware Error]: event severity: fatal
{24}[Hardware Error]:  Error 0, type: fatal
{24}[Hardware Error]:   section_type: PCIe error
{24}[Hardware Error]:   port_type: 0, PCIe end point
{24}[Hardware Error]:   version: 4.0
{24}[Hardware Error]:   command: 0x0546, status: 0x4010
{24}[Hardware Error]:   device_id: 0000:01:00.0
{24}[Hardware Error]:   slot: 0
{24}[Hardware Error]:   secondary_bus: 0x00
{24}[Hardware Error]:   vendor_id: 0x15b3, device_id: 0x1019
{24}[Hardware Error]:   class_code: 000002
{24}[Hardware Error]:   aer_uncor_status: 0x00040000, aer_uncor_mask: 0x00000000
{24}[Hardware Error]:   aer_uncor_severity: 0x00062010
{24}[Hardware Error]:   TLP Header: 000000c0 01010000 00000001 00000000
Kernel panic - not syncing: Fatal hardware error!

Fixes: 37448adfc7ce ("aerdrv: Move cper_print_aer() call out of interrupt context")
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
[ardb: put parens around terms of && operator]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/cper.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index 8fa977c7861f9..addf0749dd8b6 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -390,6 +390,21 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
 		printk(
 	"%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n",
 	pfx, pcie->bridge.secondary_status, pcie->bridge.control);
+
+	/* Fatal errors call __ghes_panic() before AER handler prints this */
+	if ((pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) &&
+	    (gdata->error_severity & CPER_SEV_FATAL)) {
+		struct aer_capability_regs *aer;
+
+		aer = (struct aer_capability_regs *)pcie->aer_info;
+		printk("%saer_uncor_status: 0x%08x, aer_uncor_mask: 0x%08x\n",
+		       pfx, aer->uncor_status, aer->uncor_mask);
+		printk("%saer_uncor_severity: 0x%08x\n",
+		       pfx, aer->uncor_severity);
+		printk("%sTLP Header: %08x %08x %08x %08x\n", pfx,
+		       aer->header_log.dw0, aer->header_log.dw1,
+		       aer->header_log.dw2, aer->header_log.dw3);
+	}
 }
 
 static void cper_print_tstamp(const char *pfx,
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 054/185] firmware: arm_scmi: Check if platform has released shmem before using
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:47   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sudeep Holla, Jim Quinlan, Sasha Levin, linux-arm-kernel

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit 9dc34d635c67e57051853855c43249408641a5ab ]

Sometimes platfom may take too long to respond to the command and OS
might timeout before platform transfer the ownership of the shared
memory region to the OS with the response.

Since the mailbox channel associated with the channel is freed and new
commands are dispatch on the same channel, OS needs to wait until it
gets back the ownership. If not, either OS may end up overwriting the
platform response for the last command(which is fine as OS timed out
that command) or platform might overwrite the payload for the next
command with the response for the old.

The latter is problematic as platform may end up interpretting the
response as the payload. In order to avoid such race, let's wait until
the OS gets back the ownership before we prepare the shared memory with
the payload for the next command.

Reported-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/driver.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index b5bc4c7a8fab2..b49c9e6f4bf10 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -271,6 +271,14 @@ static void scmi_tx_prepare(struct mbox_client *cl, void *m)
 	struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
 	struct scmi_shared_mem __iomem *mem = cinfo->payload;
 
+	/*
+	 * Ideally channel must be free by now unless OS timeout last
+	 * request and platform continued to process the same, wait
+	 * until it releases the shared memory, otherwise we may endup
+	 * overwriting its response with new message payload or vice-versa
+	 */
+	spin_until_cond(ioread32(&mem->channel_status) &
+			SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
 	/* Mark channel busy + clear error */
 	iowrite32(0x0, &mem->channel_status);
 	iowrite32(t->hdr.poll_completion ? 0 : SCMI_SHMEM_FLAG_INTR_ENABLED,
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 054/185] firmware: arm_scmi: Check if platform has released shmem before using
@ 2019-09-22 18:47   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-arm-kernel, Jim Quinlan, Sudeep Holla

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit 9dc34d635c67e57051853855c43249408641a5ab ]

Sometimes platfom may take too long to respond to the command and OS
might timeout before platform transfer the ownership of the shared
memory region to the OS with the response.

Since the mailbox channel associated with the channel is freed and new
commands are dispatch on the same channel, OS needs to wait until it
gets back the ownership. If not, either OS may end up overwriting the
platform response for the last command(which is fine as OS timed out
that command) or platform might overwrite the payload for the next
command with the response for the old.

The latter is problematic as platform may end up interpretting the
response as the payload. In order to avoid such race, let's wait until
the OS gets back the ownership before we prepare the shared memory with
the payload for the next command.

Reported-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/driver.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index b5bc4c7a8fab2..b49c9e6f4bf10 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -271,6 +271,14 @@ static void scmi_tx_prepare(struct mbox_client *cl, void *m)
 	struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
 	struct scmi_shared_mem __iomem *mem = cinfo->payload;
 
+	/*
+	 * Ideally channel must be free by now unless OS timeout last
+	 * request and platform continued to process the same, wait
+	 * until it releases the shared memory, otherwise we may endup
+	 * overwriting its response with new message payload or vice-versa
+	 */
+	spin_until_cond(ioread32(&mem->channel_status) &
+			SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
 	/* Mark channel busy + clear error */
 	iowrite32(0x0, &mem->channel_status);
 	iowrite32(t->hdr.poll_completion ? 0 : SCMI_SHMEM_FLAG_INTR_ENABLED,
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 055/185] sched/fair: Use rq_lock/unlock in online_fair_sched_group
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (52 preceding siblings ...)
  2019-09-22 18:47   ` Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 056/185] idle: Prevent late-arriving interrupts from disrupting offline Sasha Levin
                   ` (129 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Phil Auld, Peter Zijlstra, Thomas Gleixner, Ingo Molnar,
	Vincent Guittot, Ingo Molnar, Sasha Levin

From: Phil Auld <pauld@redhat.com>

[ Upstream commit a46d14eca7b75fffe35603aa8b81df654353d80f ]

Enabling WARN_DOUBLE_CLOCK in /sys/kernel/debug/sched_features causes
warning to fire in update_rq_clock. This seems to be caused by onlining
a new fair sched group not using the rq lock wrappers.

  [] rq->clock_update_flags & RQCF_UPDATED
  [] WARNING: CPU: 5 PID: 54385 at kernel/sched/core.c:210 update_rq_clock+0xec/0x150

  [] Call Trace:
  []  online_fair_sched_group+0x53/0x100
  []  cpu_cgroup_css_online+0x16/0x20
  []  online_css+0x1c/0x60
  []  cgroup_apply_control_enable+0x231/0x3b0
  []  cgroup_mkdir+0x41b/0x530
  []  kernfs_iop_mkdir+0x61/0xa0
  []  vfs_mkdir+0x108/0x1a0
  []  do_mkdirat+0x77/0xe0
  []  do_syscall_64+0x55/0x1d0
  []  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Using the wrappers in online_fair_sched_group instead of the raw locking
removes this warning.

[ tglx: Use rq_*lock_irq() ]

Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20190801133749.11033-1-pauld@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/fair.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index f72bf8122fe4e..5a312c030b8d2 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -10569,18 +10569,18 @@ int alloc_fair_sched_group(struct task_group *tg, struct task_group *parent)
 void online_fair_sched_group(struct task_group *tg)
 {
 	struct sched_entity *se;
+	struct rq_flags rf;
 	struct rq *rq;
 	int i;
 
 	for_each_possible_cpu(i) {
 		rq = cpu_rq(i);
 		se = tg->se[i];
-
-		raw_spin_lock_irq(&rq->lock);
+		rq_lock_irq(rq, &rf);
 		update_rq_clock(rq);
 		attach_entity_cfs_rq(se);
 		sync_throttle(tg, i);
-		raw_spin_unlock_irq(&rq->lock);
+		rq_unlock_irq(rq, &rf);
 	}
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 056/185] idle: Prevent late-arriving interrupts from disrupting offline
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (53 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 055/185] sched/fair: Use rq_lock/unlock in online_fair_sched_group Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 057/185] blk-mq: Fix memory leak in blk_mq_init_allocated_queue error handling Sasha Levin
                   ` (128 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Peter Zijlstra, Frederic Weisbecker, Thomas Gleixner,
	Ingo Molnar, Paul E . McKenney, Sasha Levin

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit e78a7614f3876ac649b3df608789cb6ef74d0480 ]

Scheduling-clock interrupts can arrive late in the CPU-offline process,
after idle entry and the subsequent call to cpuhp_report_idle_dead().
Once execution passes the call to rcu_report_dead(), RCU is ignoring
the CPU, which results in lockdep complaints when the interrupt handler
uses RCU:

------------------------------------------------------------------------

=============================
WARNING: suspicious RCU usage
5.2.0-rc1+ #681 Not tainted
-----------------------------
kernel/sched/fair.c:9542 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

RCU used illegally from offline CPU!
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/5/0.

stack backtrace:
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.2.0-rc1+ #681
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Bochs 01/01/2011
Call Trace:
 <IRQ>
 dump_stack+0x5e/0x8b
 trigger_load_balance+0xa8/0x390
 ? tick_sched_do_timer+0x60/0x60
 update_process_times+0x3b/0x50
 tick_sched_handle+0x2f/0x40
 tick_sched_timer+0x32/0x70
 __hrtimer_run_queues+0xd3/0x3b0
 hrtimer_interrupt+0x11d/0x270
 ? sched_clock_local+0xc/0x74
 smp_apic_timer_interrupt+0x79/0x200
 apic_timer_interrupt+0xf/0x20
 </IRQ>
RIP: 0010:delay_tsc+0x22/0x50
Code: ff 0f 1f 80 00 00 00 00 65 44 8b 05 18 a7 11 48 0f ae e8 0f 31 48 89 d6 48 c1 e6 20 48 09 c6 eb 0e f3 90 65 8b 05 fe a6 11 48 <41> 39 c0 75 18 0f ae e8 0f 31 48 c1 e2 20 48 09 c2 48 89 d0 48 29
RSP: 0000:ffff8f92c0157ed0 EFLAGS: 00000212 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000005 RBX: ffff8c861f356400 RCX: ffff8f92c0157e64
RDX: 000000321214c8cc RSI: 00000032120daa7f RDI: 0000000000260f15
RBP: 0000000000000005 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: ffff8c861ee18000 R15: ffff8c861ee18000
 cpuhp_report_idle_dead+0x31/0x60
 do_idle+0x1d5/0x200
 ? _raw_spin_unlock_irqrestore+0x2d/0x40
 cpu_startup_entry+0x14/0x20
 start_secondary+0x151/0x170
 secondary_startup_64+0xa4/0xb0

------------------------------------------------------------------------

This happens rarely, but can be forced by happen more often by
placing delays in cpuhp_report_idle_dead() following the call to
rcu_report_dead().  With this in place, the following rcutorture
scenario reproduces the problem within a few minutes:

tools/testing/selftests/rcutorture/bin/kvm.sh --cpus 8 --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TREE04"

This commit uses the crude but effective expedient of moving the disabling
of interrupts within the idle loop to precede the cpu_is_offline()
check.  It also invokes tick_nohz_idle_stop_tick() instead of
tick_nohz_idle_stop_tick_protected() to shut off the scheduling-clock
interrupt.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
[ paulmck: Revert tick_nohz_idle_stop_tick_protected() removal, new callers. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/idle.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/kernel/sched/idle.c b/kernel/sched/idle.c
index 80940939b7336..e4bc4aa739b83 100644
--- a/kernel/sched/idle.c
+++ b/kernel/sched/idle.c
@@ -241,13 +241,14 @@ static void do_idle(void)
 		check_pgt_cache();
 		rmb();
 
+		local_irq_disable();
+
 		if (cpu_is_offline(cpu)) {
-			tick_nohz_idle_stop_tick_protected();
+			tick_nohz_idle_stop_tick();
 			cpuhp_report_idle_dead();
 			arch_cpu_idle_dead();
 		}
 
-		local_irq_disable();
 		arch_cpu_idle_enter();
 
 		/*
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 057/185] blk-mq: Fix memory leak in blk_mq_init_allocated_queue error handling
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (54 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 056/185] idle: Prevent late-arriving interrupts from disrupting offline Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 058/185] media: gspca: zero usb_buf on error Sasha Levin
                   ` (127 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: zhengbin, Jens Axboe, Sasha Levin, linux-block

From: zhengbin <zhengbin13@huawei.com>

[ Upstream commit 73d9c8d4c0017e21e1ff519474ceb1450484dc9a ]

If blk_mq_init_allocated_queue->elevator_init_mq fails, need to release
the previously requested resources.

Fixes: d34849913819 ("blk-mq-sched: allow setting of default IO scheduler")
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index 68106a41f90d2..f934e8afe5b43 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2853,6 +2853,8 @@ static unsigned int nr_hw_queues(struct blk_mq_tag_set *set)
 struct request_queue *blk_mq_init_allocated_queue(struct blk_mq_tag_set *set,
 						  struct request_queue *q)
 {
+	int ret = -ENOMEM;
+
 	/* mark the queue as mq asap */
 	q->mq_ops = set->ops;
 
@@ -2914,17 +2916,18 @@ struct request_queue *blk_mq_init_allocated_queue(struct blk_mq_tag_set *set,
 	blk_mq_map_swqueue(q);
 
 	if (!(set->flags & BLK_MQ_F_NO_SCHED)) {
-		int ret;
-
 		ret = elevator_init_mq(q);
 		if (ret)
-			return ERR_PTR(ret);
+			goto err_tag_set;
 	}
 
 	return q;
 
+err_tag_set:
+	blk_mq_del_queue_tag_set(q);
 err_hctxs:
 	kfree(q->queue_hw_ctx);
+	q->nr_hw_queues = 0;
 err_sys_init:
 	blk_mq_sysfs_deinit(q);
 err_poll:
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 058/185] media: gspca: zero usb_buf on error
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (55 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 057/185] blk-mq: Fix memory leak in blk_mq_init_allocated_queue error handling Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 059/185] perf config: Honour $PERF_CONFIG env var to specify alternate .perfconfig Sasha Levin
                   ` (126 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans Verkuil, syzbot+1a35278dd0ebfb3a038a,
	syzbot+397fd082ce5143e2f67d, syzbot+06ddf1788cfd048c5e82,
	Mauro Carvalho Chehab, Sasha Levin, linux-media

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 4843a543fad3bf8221cf14e5d5f32d15cee89e84 ]

If reg_r() fails, then gspca_dev->usb_buf was left uninitialized,
and some drivers used the contents of that buffer in logic.

This caused several syzbot errors:

https://syzkaller.appspot.com/bug?extid=397fd082ce5143e2f67d
https://syzkaller.appspot.com/bug?extid=1a35278dd0ebfb3a038a
https://syzkaller.appspot.com/bug?extid=06ddf1788cfd048c5e82

I analyzed the gspca drivers and zeroed the buffer where needed.

Reported-and-tested-by: syzbot+1a35278dd0ebfb3a038a@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+397fd082ce5143e2f67d@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+06ddf1788cfd048c5e82@syzkaller.appspotmail.com

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/gspca/konica.c   |  5 +++++
 drivers/media/usb/gspca/nw80x.c    |  5 +++++
 drivers/media/usb/gspca/ov519.c    | 10 ++++++++++
 drivers/media/usb/gspca/ov534.c    |  5 +++++
 drivers/media/usb/gspca/ov534_9.c  |  1 +
 drivers/media/usb/gspca/se401.c    |  5 +++++
 drivers/media/usb/gspca/sn9c20x.c  |  5 +++++
 drivers/media/usb/gspca/sonixb.c   |  5 +++++
 drivers/media/usb/gspca/sonixj.c   |  5 +++++
 drivers/media/usb/gspca/spca1528.c |  5 +++++
 drivers/media/usb/gspca/sq930x.c   |  5 +++++
 drivers/media/usb/gspca/sunplus.c  |  5 +++++
 drivers/media/usb/gspca/vc032x.c   |  5 +++++
 drivers/media/usb/gspca/w996Xcf.c  |  5 +++++
 14 files changed, 71 insertions(+)

diff --git a/drivers/media/usb/gspca/konica.c b/drivers/media/usb/gspca/konica.c
index d8e40137a2043..53db9a2895ea5 100644
--- a/drivers/media/usb/gspca/konica.c
+++ b/drivers/media/usb/gspca/konica.c
@@ -114,6 +114,11 @@ static void reg_r(struct gspca_dev *gspca_dev, u16 value, u16 index)
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, 2);
 	}
 }
 
diff --git a/drivers/media/usb/gspca/nw80x.c b/drivers/media/usb/gspca/nw80x.c
index 59649704beba1..880f569bda30f 100644
--- a/drivers/media/usb/gspca/nw80x.c
+++ b/drivers/media/usb/gspca/nw80x.c
@@ -1572,6 +1572,11 @@ static void reg_r(struct gspca_dev *gspca_dev,
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 		return;
 	}
 	if (len == 1)
diff --git a/drivers/media/usb/gspca/ov519.c b/drivers/media/usb/gspca/ov519.c
index cfb1f53bc17e7..f417dfc0b8729 100644
--- a/drivers/media/usb/gspca/ov519.c
+++ b/drivers/media/usb/gspca/ov519.c
@@ -2073,6 +2073,11 @@ static int reg_r(struct sd *sd, u16 index)
 	} else {
 		gspca_err(gspca_dev, "reg_r %02x failed %d\n", index, ret);
 		sd->gspca_dev.usb_err = ret;
+		/*
+		 * Make sure the result is zeroed to avoid uninitialized
+		 * values.
+		 */
+		gspca_dev->usb_buf[0] = 0;
 	}
 
 	return ret;
@@ -2101,6 +2106,11 @@ static int reg_r8(struct sd *sd,
 	} else {
 		gspca_err(gspca_dev, "reg_r8 %02x failed %d\n", index, ret);
 		sd->gspca_dev.usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, 8);
 	}
 
 	return ret;
diff --git a/drivers/media/usb/gspca/ov534.c b/drivers/media/usb/gspca/ov534.c
index 56521c991db45..185c1f10fb30b 100644
--- a/drivers/media/usb/gspca/ov534.c
+++ b/drivers/media/usb/gspca/ov534.c
@@ -693,6 +693,11 @@ static u8 ov534_reg_read(struct gspca_dev *gspca_dev, u16 reg)
 	if (ret < 0) {
 		pr_err("read failed %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the result is zeroed to avoid uninitialized
+		 * values.
+		 */
+		gspca_dev->usb_buf[0] = 0;
 	}
 	return gspca_dev->usb_buf[0];
 }
diff --git a/drivers/media/usb/gspca/ov534_9.c b/drivers/media/usb/gspca/ov534_9.c
index 867f860a96500..91efc650cf769 100644
--- a/drivers/media/usb/gspca/ov534_9.c
+++ b/drivers/media/usb/gspca/ov534_9.c
@@ -1145,6 +1145,7 @@ static u8 reg_r(struct gspca_dev *gspca_dev, u16 reg)
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		return 0;
 	}
 	return gspca_dev->usb_buf[0];
 }
diff --git a/drivers/media/usb/gspca/se401.c b/drivers/media/usb/gspca/se401.c
index 061deee138c31..e087cfb5980b0 100644
--- a/drivers/media/usb/gspca/se401.c
+++ b/drivers/media/usb/gspca/se401.c
@@ -101,6 +101,11 @@ static void se401_read_req(struct gspca_dev *gspca_dev, u16 req, int silent)
 			pr_err("read req failed req %#04x error %d\n",
 			       req, err);
 		gspca_dev->usb_err = err;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, READ_REQ_SIZE);
 	}
 }
 
diff --git a/drivers/media/usb/gspca/sn9c20x.c b/drivers/media/usb/gspca/sn9c20x.c
index b43f89fee6c1d..12a2395a36ac6 100644
--- a/drivers/media/usb/gspca/sn9c20x.c
+++ b/drivers/media/usb/gspca/sn9c20x.c
@@ -909,6 +909,11 @@ static void reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length)
 	if (unlikely(result < 0 || result != length)) {
 		pr_err("Read register %02x failed %d\n", reg, result);
 		gspca_dev->usb_err = result;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 	}
 }
 
diff --git a/drivers/media/usb/gspca/sonixb.c b/drivers/media/usb/gspca/sonixb.c
index 046fc2c2a1350..4d655e2da9cba 100644
--- a/drivers/media/usb/gspca/sonixb.c
+++ b/drivers/media/usb/gspca/sonixb.c
@@ -453,6 +453,11 @@ static void reg_r(struct gspca_dev *gspca_dev,
 		dev_err(gspca_dev->v4l2_dev.dev,
 			"Error reading register %02x: %d\n", value, res);
 		gspca_dev->usb_err = res;
+		/*
+		 * Make sure the result is zeroed to avoid uninitialized
+		 * values.
+		 */
+		gspca_dev->usb_buf[0] = 0;
 	}
 }
 
diff --git a/drivers/media/usb/gspca/sonixj.c b/drivers/media/usb/gspca/sonixj.c
index 50a6c8425827f..2e1bd2df8304a 100644
--- a/drivers/media/usb/gspca/sonixj.c
+++ b/drivers/media/usb/gspca/sonixj.c
@@ -1162,6 +1162,11 @@ static void reg_r(struct gspca_dev *gspca_dev,
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 	}
 }
 
diff --git a/drivers/media/usb/gspca/spca1528.c b/drivers/media/usb/gspca/spca1528.c
index 2ae03b60163ff..ccc477944ef82 100644
--- a/drivers/media/usb/gspca/spca1528.c
+++ b/drivers/media/usb/gspca/spca1528.c
@@ -71,6 +71,11 @@ static void reg_r(struct gspca_dev *gspca_dev,
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 	}
 }
 
diff --git a/drivers/media/usb/gspca/sq930x.c b/drivers/media/usb/gspca/sq930x.c
index d1ba0888d7989..c3610247a90e0 100644
--- a/drivers/media/usb/gspca/sq930x.c
+++ b/drivers/media/usb/gspca/sq930x.c
@@ -425,6 +425,11 @@ static void reg_r(struct gspca_dev *gspca_dev,
 	if (ret < 0) {
 		pr_err("reg_r %04x failed %d\n", value, ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 	}
 }
 
diff --git a/drivers/media/usb/gspca/sunplus.c b/drivers/media/usb/gspca/sunplus.c
index d0ddfa957ca9f..f4a4222f0d2e4 100644
--- a/drivers/media/usb/gspca/sunplus.c
+++ b/drivers/media/usb/gspca/sunplus.c
@@ -255,6 +255,11 @@ static void reg_r(struct gspca_dev *gspca_dev,
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 	}
 }
 
diff --git a/drivers/media/usb/gspca/vc032x.c b/drivers/media/usb/gspca/vc032x.c
index 588a847ea4834..4cb7c92ea1328 100644
--- a/drivers/media/usb/gspca/vc032x.c
+++ b/drivers/media/usb/gspca/vc032x.c
@@ -2906,6 +2906,11 @@ static void reg_r_i(struct gspca_dev *gspca_dev,
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 	}
 }
 static void reg_r(struct gspca_dev *gspca_dev,
diff --git a/drivers/media/usb/gspca/w996Xcf.c b/drivers/media/usb/gspca/w996Xcf.c
index 16b679c2de21f..a8350ee9712fb 100644
--- a/drivers/media/usb/gspca/w996Xcf.c
+++ b/drivers/media/usb/gspca/w996Xcf.c
@@ -133,6 +133,11 @@ static int w9968cf_read_sb(struct sd *sd)
 	} else {
 		pr_err("Read SB reg [01] failed\n");
 		sd->gspca_dev.usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(sd->gspca_dev.usb_buf, 0, 2);
 	}
 
 	udelay(W9968CF_I2C_BUS_DELAY);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 059/185] perf config: Honour $PERF_CONFIG env var to specify alternate .perfconfig
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (56 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 058/185] media: gspca: zero usb_buf on error Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 060/185] perf test vfs_getname: Disable ~/.perfconfig to get default output Sasha Levin
                   ` (125 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Arnaldo Carvalho de Melo, Adrian Hunter, Jiri Olsa,
	Luis Cláudio Gonçalves, Namhyung Kim, Taeung Song,
	Sasha Levin

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 61a461fcbd62d42c29a1ea6a9cc3838ad9f49401 ]

We had this comment in Documentation/perf_counter/config.c, i.e. since
when we got this from the git sources, but never really did that
getenv("PERF_CONFIG"), do it now as I need to disable whatever
~/.perfconfig root has so that tests parsing tool output are done for
the expected default output or that we specify an alternate config file
that when read will make the tools produce expected output.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Fixes: 078006012401 ("perf_counter tools: add in basic glue from Git")
Link: https://lkml.kernel.org/n/tip-jo209zac9rut0dz1rqvbdlgm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/perf.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index 72df4b6fa36fd..4c45cdf38adae 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -440,6 +440,9 @@ int main(int argc, const char **argv)
 
 	srandom(time(NULL));
 
+	/* Setting $PERF_CONFIG makes perf read _only_ the given config file. */
+	config_exclusive_filename = getenv("PERF_CONFIG");
+
 	err = perf_config(perf_default_config, NULL);
 	if (err)
 		return err;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 060/185] perf test vfs_getname: Disable ~/.perfconfig to get default output
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (57 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 059/185] perf config: Honour $PERF_CONFIG env var to specify alternate .perfconfig Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 061/185] media: mtk-mdp: fix reference count on old device tree Sasha Levin
                   ` (124 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Arnaldo Carvalho de Melo, Adrian Hunter, Jiri Olsa,
	Luis Cláudio Gonçalves, Namhyung Kim, Taeung Song,
	Sasha Levin

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 4fe94ce1c6ba678b5f12b94bb9996eea4fc99e85 ]

To get the expected output we have to ignore whatever changes the user
has in its ~/.perfconfig file, so set PERF_CONFIG to /dev/null to
achieve that.

Before:

  # egrep 'trace|show_' ~/.perfconfig
  [trace]
  	show_zeros = yes
  	show_duration = no
  	show_timestamp = no
  	show_arg_names = no
  	show_prefix = yes
  # echo $PERF_CONFIG

  # perf test "trace + vfs_getname"
  70: Check open filename arg using perf trace + vfs_getname: FAILED!
  # export PERF_CONFIG=/dev/null
  # perf test "trace + vfs_getname"
  70: Check open filename arg using perf trace + vfs_getname: Ok
  #

After:

  # egrep 'trace|show_' ~/.perfconfig
  [trace]
  	show_zeros = yes
  	show_duration = no
  	show_timestamp = no
  	show_arg_names = no
  	show_prefix = yes
  # echo $PERF_CONFIG

  # perf test "trace + vfs_getname"
  70: Check open filename arg using perf trace + vfs_getname: Ok
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: https://lkml.kernel.org/n/tip-3up27pexg5i3exuzqrvt4m8u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/tests/shell/trace+probe_vfs_getname.sh | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/perf/tests/shell/trace+probe_vfs_getname.sh b/tools/perf/tests/shell/trace+probe_vfs_getname.sh
index 147efeb6b1959..e97f55ba61c23 100755
--- a/tools/perf/tests/shell/trace+probe_vfs_getname.sh
+++ b/tools/perf/tests/shell/trace+probe_vfs_getname.sh
@@ -31,6 +31,10 @@ if [ $err -ne 0 ] ; then
 	exit $err
 fi
 
+# Do not use whatever ~/.perfconfig file, it may change the output
+# via trace.{show_timestamp,show_prefix,etc}
+export PERF_CONFIG=/dev/null
+
 trace_open_vfs_getname
 err=$?
 rm -f ${file}
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 061/185] media: mtk-mdp: fix reference count on old device tree
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (58 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 060/185] perf test vfs_getname: Disable ~/.perfconfig to get default output Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 062/185] media: i2c: tda1997x: prevent potential NULL pointer access Sasha Levin
                   ` (123 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Matthias Brugger, Houlong Wei, Hans Verkuil,
	Mauro Carvalho Chehab, Sasha Levin, linux-media

From: Matthias Brugger <matthias.bgg@gmail.com>

[ Upstream commit 864919ea0380e62adb2503b89825fe358acb8216 ]

of_get_next_child() increments the reference count of the returning
device_node. Decrement it in the check if we are using the old or the
new DTB.

Fixes: ba1f1f70c2c0 ("[media] media: mtk-mdp: Fix mdp device tree")
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Houlong Wei <houlong.wei@mediatek.com>
[hverkuil-cisco@xs4all.nl: use node instead of parent as temp variable]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
index fc9faec85edb6..5d44f2e92dd50 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
@@ -110,7 +110,9 @@ static int mtk_mdp_probe(struct platform_device *pdev)
 	mutex_init(&mdp->vpulock);
 
 	/* Old dts had the components as child nodes */
-	if (of_get_next_child(dev->of_node, NULL)) {
+	node = of_get_next_child(dev->of_node, NULL);
+	if (node) {
+		of_node_put(node);
 		parent = dev->of_node;
 		dev_warn(dev, "device tree is out of date\n");
 	} else {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 062/185] media: i2c: tda1997x: prevent potential NULL pointer access
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (59 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 061/185] media: mtk-mdp: fix reference count on old device tree Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 063/185] media: fdp1: Reduce FCP not found message level to debug Sasha Levin
                   ` (122 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Wolfram Sang, Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin,
	linux-media

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit 2f822f1da08ac5c93e351e79d22920f08fa51baf ]

i2c_new_dummy() can fail returning a NULL pointer. This is not checked
and the returned pointer is blindly used. Convert to
devm_i2c_new_dummy_client() which returns an ERR_PTR and also add a
validity check. Using devm_* here also fixes a leak because the dummy
client was not released in the probe error path.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/tda1997x.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/tda1997x.c b/drivers/media/i2c/tda1997x.c
index a62ede0966361..5e68182001ecc 100644
--- a/drivers/media/i2c/tda1997x.c
+++ b/drivers/media/i2c/tda1997x.c
@@ -2691,7 +2691,13 @@ static int tda1997x_probe(struct i2c_client *client,
 	}
 
 	ret = 0x34 + ((io_read(sd, REG_SLAVE_ADDR)>>4) & 0x03);
-	state->client_cec = i2c_new_dummy(client->adapter, ret);
+	state->client_cec = devm_i2c_new_dummy_device(&client->dev,
+						      client->adapter, ret);
+	if (IS_ERR(state->client_cec)) {
+		ret = PTR_ERR(state->client_cec);
+		goto err_free_mutex;
+	}
+
 	v4l_info(client, "CEC slave address 0x%02x\n", ret);
 
 	ret = tda1997x_core_init(sd);
@@ -2798,7 +2804,6 @@ static int tda1997x_remove(struct i2c_client *client)
 	media_entity_cleanup(&sd->entity);
 	v4l2_ctrl_handler_free(&state->hdl);
 	regulator_bulk_disable(TDA1997X_NUM_SUPPLIES, state->supplies);
-	i2c_unregister_device(state->client_cec);
 	cancel_delayed_work(&state->delayed_work_enable_hpd);
 	mutex_destroy(&state->page_lock);
 	mutex_destroy(&state->lock);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 063/185] media: fdp1: Reduce FCP not found message level to debug
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (60 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 062/185] media: i2c: tda1997x: prevent potential NULL pointer access Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 064/185] media: em28xx: modules workqueue not inited for 2nd device Sasha Levin
                   ` (121 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Geert Uytterhoeven, Kieran Bingham, Hans Verkuil,
	Mauro Carvalho Chehab, Sasha Levin, linux-media,
	linux-renesas-soc

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 4fd22938569c14f6092c05880ca387409d78355f ]

When support for the IPMMU is not enabled, the FDP driver may be
probe-deferred multiple times, causing several messages to be printed
like:

    rcar_fdp1 fe940000.fdp1: FCP not found (-517)
    rcar_fdp1 fe944000.fdp1: FCP not found (-517)

Fix this by reducing the message level to debug level, as is done in the
VSP1 driver.

Fixes: 4710b752e029f3f8 ("[media] v4l: Add Renesas R-Car FDP1 Driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/rcar_fdp1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/rcar_fdp1.c b/drivers/media/platform/rcar_fdp1.c
index b8615a288e2b7..6ca2cb15291f1 100644
--- a/drivers/media/platform/rcar_fdp1.c
+++ b/drivers/media/platform/rcar_fdp1.c
@@ -2306,7 +2306,7 @@ static int fdp1_probe(struct platform_device *pdev)
 		fdp1->fcp = rcar_fcp_get(fcp_node);
 		of_node_put(fcp_node);
 		if (IS_ERR(fdp1->fcp)) {
-			dev_err(&pdev->dev, "FCP not found (%ld)\n",
+			dev_dbg(&pdev->dev, "FCP not found (%ld)\n",
 				PTR_ERR(fdp1->fcp));
 			return PTR_ERR(fdp1->fcp);
 		}
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 064/185] media: em28xx: modules workqueue not inited for 2nd device
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (61 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 063/185] media: fdp1: Reduce FCP not found message level to debug Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 065/185] arm64/efi: Move variable assignments after SECTIONS Sasha Levin
                   ` (120 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sean Young, Ezequiel Garcia, Brad Love,
	syzbot+b7f57261c521087d89bb, Mauro Carvalho Chehab, Sasha Levin,
	linux-media

From: Sean Young <sean@mess.org>

[ Upstream commit 46e4a26615cc7854340e4b69ca59ee78d6f20c8b ]

syzbot reports an error on flush_request_modules() for the second device.
This workqueue was never initialised so simply remove the offending line.

usb 1-1: USB disconnect, device number 2
em28xx 1-1:1.153: Disconnecting em28xx #1
------------[ cut here ]------------
WARNING: CPU: 0 PID: 12 at kernel/workqueue.c:3031
__flush_work.cold+0x2c/0x36 kernel/workqueue.c:3031
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc2+ #25
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  panic+0x2a3/0x6da kernel/panic.c:219
  __warn.cold+0x20/0x4a kernel/panic.c:576
  report_bug+0x262/0x2a0 lib/bug.c:186
  fixup_bug arch/x86/kernel/traps.c:179 [inline]
  fixup_bug arch/x86/kernel/traps.c:174 [inline]
  do_error_trap+0x12b/0x1e0 arch/x86/kernel/traps.c:272
  do_invalid_op+0x32/0x40 arch/x86/kernel/traps.c:291
  invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1026
RIP: 0010:__flush_work.cold+0x2c/0x36 kernel/workqueue.c:3031
Code: 9a 22 00 48 c7 c7 20 e4 c5 85 e8 d9 3a 0d 00 0f 0b 45 31 e4 e9 98 86
ff ff e8 51 9a 22 00 48 c7 c7 20 e4 c5 85 e8 be 3a 0d 00 <0f> 0b 45 31 e4
e9 7d 86 ff ff e8 36 9a 22 00 48 c7 c7 20 e4 c5 85
RSP: 0018:ffff8881da20f720 EFLAGS: 00010286
RAX: 0000000000000024 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8128a0fd RDI: ffffed103b441ed6
RBP: ffff8881da20f888 R08: 0000000000000024 R09: fffffbfff11acd9a
R10: fffffbfff11acd99 R11: ffffffff88d66ccf R12: 0000000000000000
R13: 0000000000000001 R14: ffff8881c6685df8 R15: ffff8881d2a85b78
  flush_request_modules drivers/media/usb/em28xx/em28xx-cards.c:3325 [inline]
  em28xx_usb_disconnect.cold+0x280/0x2a6
drivers/media/usb/em28xx/em28xx-cards.c:4023
  usb_unbind_interface+0x1bd/0x8a0 drivers/usb/core/driver.c:423
  __device_release_driver drivers/base/dd.c:1120 [inline]
  device_release_driver_internal+0x404/0x4c0 drivers/base/dd.c:1151
  bus_remove_device+0x2dc/0x4a0 drivers/base/bus.c:556
  device_del+0x420/0xb10 drivers/base/core.c:2288
  usb_disable_device+0x211/0x690 drivers/usb/core/message.c:1237
  usb_disconnect+0x284/0x8d0 drivers/usb/core/hub.c:2199
  hub_port_connect drivers/usb/core/hub.c:4949 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
  port_event drivers/usb/core/hub.c:5359 [inline]
  hub_event+0x1454/0x3640 drivers/usb/core/hub.c:5441
  process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
  process_scheduled_works kernel/workqueue.c:2331 [inline]
  worker_thread+0x7ab/0xe20 kernel/workqueue.c:2417
  kthread+0x318/0x420 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Kernel Offset: disabled
Rebooting in 86400 seconds..

Fixes: be7fd3c3a8c5e ("media: em28xx: Hauppauge DualHD second tuner functionality)
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Brad Love <brad@nextdimension.cc>
Reported-by: syzbot+b7f57261c521087d89bb@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/em28xx/em28xx-cards.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 1283c7ca9ad51..1de835a591a06 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -4020,7 +4020,6 @@ static void em28xx_usb_disconnect(struct usb_interface *intf)
 		dev->dev_next->disconnected = 1;
 		dev_info(&dev->intf->dev, "Disconnecting %s\n",
 			 dev->dev_next->name);
-		flush_request_modules(dev->dev_next);
 	}
 
 	dev->disconnected = 1;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 065/185] arm64/efi: Move variable assignments after SECTIONS
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (62 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 064/185] media: em28xx: modules workqueue not inited for 2nd device Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 066/185] perf unwind: Fix libunwind when tid != pid Sasha Levin
                   ` (119 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Kees Cook, Ard Biesheuvel, Will Deacon, Sasha Levin

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 90776dd1c427cbb4d381aa4b13338f1fb1d20f5e ]

It seems that LLVM's linker does not correctly handle variable assignments
involving section positions that are updated during the SECTIONS
parsing. Commit aa69fb62bea1 ("arm64/efi: Mark __efistub_stext_offset as
an absolute symbol explicitly") ran into this too, but found a different
workaround.

However, this was not enough, as other variables were also miscalculated
which manifested as boot failures under UEFI where __efistub__end was
not taking the correct _end value (they should be the same):

$ ld.lld -EL -maarch64elf --no-undefined -X -shared \
	-Bsymbolic -z notext -z norelro --no-apply-dynamic-relocs \
	-o vmlinux.lld -T poc.lds --whole-archive vmlinux.o && \
  readelf -Ws vmlinux.lld | egrep '\b(__efistub_|)_end\b'
368272: ffff000002218000     0 NOTYPE  LOCAL  HIDDEN    38 __efistub__end
368322: ffff000012318000     0 NOTYPE  GLOBAL DEFAULT   38 _end

$ aarch64-linux-gnu-ld.bfd -EL -maarch64elf --no-undefined -X -shared \
	-Bsymbolic -z notext -z norelro --no-apply-dynamic-relocs \
	-o vmlinux.bfd -T poc.lds --whole-archive vmlinux.o && \
  readelf -Ws vmlinux.bfd | egrep '\b(__efistub_|)_end\b'
338124: ffff000012318000     0 NOTYPE  LOCAL  DEFAULT  ABS __efistub__end
383812: ffff000012318000     0 NOTYPE  GLOBAL DEFAULT 15325 _end

To work around this, all of the __efistub_-prefixed variable assignments
need to be moved after the linker script's SECTIONS entry. As it turns
out, this also solves the problem fixed in commit aa69fb62bea1, so those
changes are reverted here.

Link: https://github.com/ClangBuiltLinux/linux/issues/634
Link: https://bugs.llvm.org/show_bug.cgi?id=42990
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/image-vars.h  | 51 +++++++++++++++++++++++++++++++++
 arch/arm64/kernel/image.h       | 42 ---------------------------
 arch/arm64/kernel/vmlinux.lds.S |  2 ++
 3 files changed, 53 insertions(+), 42 deletions(-)
 create mode 100644 arch/arm64/kernel/image-vars.h

diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h
new file mode 100644
index 0000000000000..25a2a9b479c2f
--- /dev/null
+++ b/arch/arm64/kernel/image-vars.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Linker script variables to be set after section resolution, as
+ * ld.lld does not like variables assigned before SECTIONS is processed.
+ */
+#ifndef __ARM64_KERNEL_IMAGE_VARS_H
+#define __ARM64_KERNEL_IMAGE_VARS_H
+
+#ifndef LINKER_SCRIPT
+#error This file should only be included in vmlinux.lds.S
+#endif
+
+#ifdef CONFIG_EFI
+
+__efistub_stext_offset = stext - _text;
+
+/*
+ * The EFI stub has its own symbol namespace prefixed by __efistub_, to
+ * isolate it from the kernel proper. The following symbols are legally
+ * accessed by the stub, so provide some aliases to make them accessible.
+ * Only include data symbols here, or text symbols of functions that are
+ * guaranteed to be safe when executed at another offset than they were
+ * linked at. The routines below are all implemented in assembler in a
+ * position independent manner
+ */
+__efistub_memcmp		= __pi_memcmp;
+__efistub_memchr		= __pi_memchr;
+__efistub_memcpy		= __pi_memcpy;
+__efistub_memmove		= __pi_memmove;
+__efistub_memset		= __pi_memset;
+__efistub_strlen		= __pi_strlen;
+__efistub_strnlen		= __pi_strnlen;
+__efistub_strcmp		= __pi_strcmp;
+__efistub_strncmp		= __pi_strncmp;
+__efistub_strrchr		= __pi_strrchr;
+__efistub___flush_dcache_area	= __pi___flush_dcache_area;
+
+#ifdef CONFIG_KASAN
+__efistub___memcpy		= __pi_memcpy;
+__efistub___memmove		= __pi_memmove;
+__efistub___memset		= __pi_memset;
+#endif
+
+__efistub__text			= _text;
+__efistub__end			= _end;
+__efistub__edata		= _edata;
+__efistub_screen_info		= screen_info;
+
+#endif
+
+#endif /* __ARM64_KERNEL_IMAGE_VARS_H */
diff --git a/arch/arm64/kernel/image.h b/arch/arm64/kernel/image.h
index 2b85c0d6fa3d1..c7d38c660372c 100644
--- a/arch/arm64/kernel/image.h
+++ b/arch/arm64/kernel/image.h
@@ -65,46 +65,4 @@
 	DEFINE_IMAGE_LE64(_kernel_offset_le, TEXT_OFFSET);	\
 	DEFINE_IMAGE_LE64(_kernel_flags_le, __HEAD_FLAGS);
 
-#ifdef CONFIG_EFI
-
-/*
- * Use ABSOLUTE() to avoid ld.lld treating this as a relative symbol:
- * https://github.com/ClangBuiltLinux/linux/issues/561
- */
-__efistub_stext_offset = ABSOLUTE(stext - _text);
-
-/*
- * The EFI stub has its own symbol namespace prefixed by __efistub_, to
- * isolate it from the kernel proper. The following symbols are legally
- * accessed by the stub, so provide some aliases to make them accessible.
- * Only include data symbols here, or text symbols of functions that are
- * guaranteed to be safe when executed at another offset than they were
- * linked at. The routines below are all implemented in assembler in a
- * position independent manner
- */
-__efistub_memcmp		= __pi_memcmp;
-__efistub_memchr		= __pi_memchr;
-__efistub_memcpy		= __pi_memcpy;
-__efistub_memmove		= __pi_memmove;
-__efistub_memset		= __pi_memset;
-__efistub_strlen		= __pi_strlen;
-__efistub_strnlen		= __pi_strnlen;
-__efistub_strcmp		= __pi_strcmp;
-__efistub_strncmp		= __pi_strncmp;
-__efistub_strrchr		= __pi_strrchr;
-__efistub___flush_dcache_area	= __pi___flush_dcache_area;
-
-#ifdef CONFIG_KASAN
-__efistub___memcpy		= __pi_memcpy;
-__efistub___memmove		= __pi_memmove;
-__efistub___memset		= __pi_memset;
-#endif
-
-__efistub__text			= _text;
-__efistub__end			= _end;
-__efistub__edata		= _edata;
-__efistub_screen_info		= screen_info;
-
-#endif
-
 #endif /* __ARM64_KERNEL_IMAGE_H */
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index 7fa0083749078..803b24d2464ae 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -245,6 +245,8 @@ SECTIONS
 	HEAD_SYMBOLS
 }
 
+#include "image-vars.h"
+
 /*
  * The HYP init code and ID map text can't be longer than a page each,
  * and should not cross a page boundary.
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 066/185] perf unwind: Fix libunwind when tid != pid
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (63 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 065/185] arm64/efi: Move variable assignments after SECTIONS Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 067/185] media: rc: imon: Allow iMON RC protocol for ffdc 7e device Sasha Levin
                   ` (118 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: John Keeping, Jiri Olsa, Alexander Shishkin,
	Konstantin Khlebnikov, Namhyung Kim, Peter Zijlstra,
	Arnaldo Carvalho de Melo, Sasha Levin

From: John Keeping <john@metanate.com>

[ Upstream commit e8ba2906f6b9054102ad035ac9cafad9d4168589 ]

Commit e5adfc3e7e77 ("perf map: Synthesize maps only for thread group
leader") changed the recording side so that we no longer get mmap events
for threads other than the thread group leader (when synthesising these
events for threads which exist before perf is started).

When a file recorded after this change is loaded, the lack of mmap
records mean that unwinding is not set up for any other threads.

This can be seen in a simple record/report scenario:

	perf record --call-graph=dwarf -t $TID
	perf report

If $TID is a process ID then the report will show call graphs, but if
$TID is a secondary thread the output is as if --call-graph=none was
specified.

Following the rationale in that commit, move the libunwind fields into
struct map_groups and update the libunwind functions to take this
instead of the struct thread.  This is only required for
unwind__finish_access which must now be called from map_groups__delete
and the others are changed for symmetry.

Note that unwind__get_entries keeps the thread argument since it is
required for symbol lookup and the libdw unwind provider uses the thread
ID.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: e5adfc3e7e77 ("perf map: Synthesize maps only for thread group leader")
Link: http://lkml.kernel.org/r/20190815100146.28842-2-john@metanate.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/map.c                    |  3 ++-
 tools/perf/util/map_groups.h             |  4 +++
 tools/perf/util/thread.c                 |  7 +++--
 tools/perf/util/thread.h                 |  4 ---
 tools/perf/util/unwind-libunwind-local.c | 18 ++++++-------
 tools/perf/util/unwind-libunwind.c       | 34 ++++++++++++------------
 tools/perf/util/unwind.h                 | 25 ++++++++---------
 7 files changed, 48 insertions(+), 47 deletions(-)

diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index 9c81ee0927848..3fc32c7075d1e 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -641,6 +641,7 @@ struct map_groups *map_groups__new(struct machine *machine)
 void map_groups__delete(struct map_groups *mg)
 {
 	map_groups__exit(mg);
+	unwind__finish_access(mg);
 	free(mg);
 }
 
@@ -881,7 +882,7 @@ int map_groups__clone(struct thread *thread, struct map_groups *parent)
 		if (new == NULL)
 			goto out_unlock;
 
-		err = unwind__prepare_access(thread, new, NULL);
+		err = unwind__prepare_access(mg, new, NULL);
 		if (err)
 			goto out_unlock;
 
diff --git a/tools/perf/util/map_groups.h b/tools/perf/util/map_groups.h
index 4dcda33e0fdf7..db1e4ffc2276d 100644
--- a/tools/perf/util/map_groups.h
+++ b/tools/perf/util/map_groups.h
@@ -31,6 +31,10 @@ struct map_groups {
 	struct maps	 maps;
 	struct machine	 *machine;
 	refcount_t	 refcnt;
+#ifdef HAVE_LIBUNWIND_SUPPORT
+	void				*addr_space;
+	struct unwind_libunwind_ops	*unwind_libunwind_ops;
+#endif
 };
 
 #define KMAP_NAME_LEN 256
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index 4a9f88d9b7ab3..12608f14c9910 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -105,7 +105,6 @@ void thread__delete(struct thread *thread)
 	}
 	up_write(&thread->comm_lock);
 
-	unwind__finish_access(thread);
 	nsinfo__zput(thread->nsinfo);
 	srccode_state_free(&thread->srccode_state);
 
@@ -235,7 +234,7 @@ static int ____thread__set_comm(struct thread *thread, const char *str,
 		list_add(&new->list, &thread->comm_list);
 
 		if (exec)
-			unwind__flush_access(thread);
+			unwind__flush_access(thread->mg);
 	}
 
 	thread->comm_set = true;
@@ -315,7 +314,7 @@ int thread__insert_map(struct thread *thread, struct map *map)
 {
 	int ret;
 
-	ret = unwind__prepare_access(thread, map, NULL);
+	ret = unwind__prepare_access(thread->mg, map, NULL);
 	if (ret)
 		return ret;
 
@@ -335,7 +334,7 @@ static int __thread__prepare_access(struct thread *thread)
 	down_read(&maps->lock);
 
 	for (map = maps__first(maps); map; map = map__next(map)) {
-		err = unwind__prepare_access(thread, map, &initialized);
+		err = unwind__prepare_access(thread->mg, map, &initialized);
 		if (err || initialized)
 			break;
 	}
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
index cf8375c017a03..6e5dd445bafdc 100644
--- a/tools/perf/util/thread.h
+++ b/tools/perf/util/thread.h
@@ -44,10 +44,6 @@ struct thread {
 	struct thread_stack	*ts;
 	struct nsinfo		*nsinfo;
 	struct srccode_state	srccode_state;
-#ifdef HAVE_LIBUNWIND_SUPPORT
-	void				*addr_space;
-	struct unwind_libunwind_ops	*unwind_libunwind_ops;
-#endif
 	bool			filter;
 	int			filter_entry_depth;
 };
diff --git a/tools/perf/util/unwind-libunwind-local.c b/tools/perf/util/unwind-libunwind-local.c
index 25e1406b1f8b6..da59672b566de 100644
--- a/tools/perf/util/unwind-libunwind-local.c
+++ b/tools/perf/util/unwind-libunwind-local.c
@@ -615,26 +615,26 @@ static unw_accessors_t accessors = {
 	.get_proc_name		= get_proc_name,
 };
 
-static int _unwind__prepare_access(struct thread *thread)
+static int _unwind__prepare_access(struct map_groups *mg)
 {
-	thread->addr_space = unw_create_addr_space(&accessors, 0);
-	if (!thread->addr_space) {
+	mg->addr_space = unw_create_addr_space(&accessors, 0);
+	if (!mg->addr_space) {
 		pr_err("unwind: Can't create unwind address space.\n");
 		return -ENOMEM;
 	}
 
-	unw_set_caching_policy(thread->addr_space, UNW_CACHE_GLOBAL);
+	unw_set_caching_policy(mg->addr_space, UNW_CACHE_GLOBAL);
 	return 0;
 }
 
-static void _unwind__flush_access(struct thread *thread)
+static void _unwind__flush_access(struct map_groups *mg)
 {
-	unw_flush_cache(thread->addr_space, 0, 0);
+	unw_flush_cache(mg->addr_space, 0, 0);
 }
 
-static void _unwind__finish_access(struct thread *thread)
+static void _unwind__finish_access(struct map_groups *mg)
 {
-	unw_destroy_addr_space(thread->addr_space);
+	unw_destroy_addr_space(mg->addr_space);
 }
 
 static int get_entries(struct unwind_info *ui, unwind_entry_cb_t cb,
@@ -659,7 +659,7 @@ static int get_entries(struct unwind_info *ui, unwind_entry_cb_t cb,
 	 */
 	if (max_stack - 1 > 0) {
 		WARN_ONCE(!ui->thread, "WARNING: ui->thread is NULL");
-		addr_space = ui->thread->addr_space;
+		addr_space = ui->thread->mg->addr_space;
 
 		if (addr_space == NULL)
 			return -1;
diff --git a/tools/perf/util/unwind-libunwind.c b/tools/perf/util/unwind-libunwind.c
index c0811977d7d54..b843f9d0a9ea2 100644
--- a/tools/perf/util/unwind-libunwind.c
+++ b/tools/perf/util/unwind-libunwind.c
@@ -11,13 +11,13 @@ struct unwind_libunwind_ops __weak *local_unwind_libunwind_ops;
 struct unwind_libunwind_ops __weak *x86_32_unwind_libunwind_ops;
 struct unwind_libunwind_ops __weak *arm64_unwind_libunwind_ops;
 
-static void unwind__register_ops(struct thread *thread,
+static void unwind__register_ops(struct map_groups *mg,
 			  struct unwind_libunwind_ops *ops)
 {
-	thread->unwind_libunwind_ops = ops;
+	mg->unwind_libunwind_ops = ops;
 }
 
-int unwind__prepare_access(struct thread *thread, struct map *map,
+int unwind__prepare_access(struct map_groups *mg, struct map *map,
 			   bool *initialized)
 {
 	const char *arch;
@@ -28,7 +28,7 @@ int unwind__prepare_access(struct thread *thread, struct map *map,
 	if (!dwarf_callchain_users)
 		return 0;
 
-	if (thread->addr_space) {
+	if (mg->addr_space) {
 		pr_debug("unwind: thread map already set, dso=%s\n",
 			 map->dso->name);
 		if (initialized)
@@ -37,14 +37,14 @@ int unwind__prepare_access(struct thread *thread, struct map *map,
 	}
 
 	/* env->arch is NULL for live-mode (i.e. perf top) */
-	if (!thread->mg->machine->env || !thread->mg->machine->env->arch)
+	if (!mg->machine->env || !mg->machine->env->arch)
 		goto out_register;
 
-	dso_type = dso__type(map->dso, thread->mg->machine);
+	dso_type = dso__type(map->dso, mg->machine);
 	if (dso_type == DSO__TYPE_UNKNOWN)
 		return 0;
 
-	arch = perf_env__arch(thread->mg->machine->env);
+	arch = perf_env__arch(mg->machine->env);
 
 	if (!strcmp(arch, "x86")) {
 		if (dso_type != DSO__TYPE_64BIT)
@@ -59,37 +59,37 @@ int unwind__prepare_access(struct thread *thread, struct map *map,
 		return 0;
 	}
 out_register:
-	unwind__register_ops(thread, ops);
+	unwind__register_ops(mg, ops);
 
-	err = thread->unwind_libunwind_ops->prepare_access(thread);
+	err = mg->unwind_libunwind_ops->prepare_access(mg);
 	if (initialized)
 		*initialized = err ? false : true;
 	return err;
 }
 
-void unwind__flush_access(struct thread *thread)
+void unwind__flush_access(struct map_groups *mg)
 {
 	if (!dwarf_callchain_users)
 		return;
 
-	if (thread->unwind_libunwind_ops)
-		thread->unwind_libunwind_ops->flush_access(thread);
+	if (mg->unwind_libunwind_ops)
+		mg->unwind_libunwind_ops->flush_access(mg);
 }
 
-void unwind__finish_access(struct thread *thread)
+void unwind__finish_access(struct map_groups *mg)
 {
 	if (!dwarf_callchain_users)
 		return;
 
-	if (thread->unwind_libunwind_ops)
-		thread->unwind_libunwind_ops->finish_access(thread);
+	if (mg->unwind_libunwind_ops)
+		mg->unwind_libunwind_ops->finish_access(mg);
 }
 
 int unwind__get_entries(unwind_entry_cb_t cb, void *arg,
 			 struct thread *thread,
 			 struct perf_sample *data, int max_stack)
 {
-	if (thread->unwind_libunwind_ops)
-		return thread->unwind_libunwind_ops->get_entries(cb, arg, thread, data, max_stack);
+	if (thread->mg->unwind_libunwind_ops)
+		return thread->mg->unwind_libunwind_ops->get_entries(cb, arg, thread, data, max_stack);
 	return 0;
 }
diff --git a/tools/perf/util/unwind.h b/tools/perf/util/unwind.h
index 8a44a1569a21b..3a7d00c20d862 100644
--- a/tools/perf/util/unwind.h
+++ b/tools/perf/util/unwind.h
@@ -6,6 +6,7 @@
 #include <linux/types.h>
 
 struct map;
+struct map_groups;
 struct perf_sample;
 struct symbol;
 struct thread;
@@ -19,9 +20,9 @@ struct unwind_entry {
 typedef int (*unwind_entry_cb_t)(struct unwind_entry *entry, void *arg);
 
 struct unwind_libunwind_ops {
-	int (*prepare_access)(struct thread *thread);
-	void (*flush_access)(struct thread *thread);
-	void (*finish_access)(struct thread *thread);
+	int (*prepare_access)(struct map_groups *mg);
+	void (*flush_access)(struct map_groups *mg);
+	void (*finish_access)(struct map_groups *mg);
 	int (*get_entries)(unwind_entry_cb_t cb, void *arg,
 			   struct thread *thread,
 			   struct perf_sample *data, int max_stack);
@@ -46,20 +47,20 @@ int unwind__get_entries(unwind_entry_cb_t cb, void *arg,
 #endif
 
 int LIBUNWIND__ARCH_REG_ID(int regnum);
-int unwind__prepare_access(struct thread *thread, struct map *map,
+int unwind__prepare_access(struct map_groups *mg, struct map *map,
 			   bool *initialized);
-void unwind__flush_access(struct thread *thread);
-void unwind__finish_access(struct thread *thread);
+void unwind__flush_access(struct map_groups *mg);
+void unwind__finish_access(struct map_groups *mg);
 #else
-static inline int unwind__prepare_access(struct thread *thread __maybe_unused,
+static inline int unwind__prepare_access(struct map_groups *mg __maybe_unused,
 					 struct map *map __maybe_unused,
 					 bool *initialized __maybe_unused)
 {
 	return 0;
 }
 
-static inline void unwind__flush_access(struct thread *thread __maybe_unused) {}
-static inline void unwind__finish_access(struct thread *thread __maybe_unused) {}
+static inline void unwind__flush_access(struct map_groups *mg __maybe_unused) {}
+static inline void unwind__finish_access(struct map_groups *mg __maybe_unused) {}
 #endif
 #else
 static inline int
@@ -72,14 +73,14 @@ unwind__get_entries(unwind_entry_cb_t cb __maybe_unused,
 	return 0;
 }
 
-static inline int unwind__prepare_access(struct thread *thread __maybe_unused,
+static inline int unwind__prepare_access(struct map_groups *mg __maybe_unused,
 					 struct map *map __maybe_unused,
 					 bool *initialized __maybe_unused)
 {
 	return 0;
 }
 
-static inline void unwind__flush_access(struct thread *thread __maybe_unused) {}
-static inline void unwind__finish_access(struct thread *thread __maybe_unused) {}
+static inline void unwind__flush_access(struct map_groups *mg __maybe_unused) {}
+static inline void unwind__finish_access(struct map_groups *mg __maybe_unused) {}
 #endif /* HAVE_DWARF_UNWIND_SUPPORT */
 #endif /* __UNWIND_H */
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 067/185] media: rc: imon: Allow iMON RC protocol for ffdc 7e device
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (64 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 066/185] perf unwind: Fix libunwind when tid != pid Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 068/185] dmaengine: iop-adma: use correct printk format strings Sasha Levin
                   ` (117 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Darius Rad, Sean Young, Mauro Carvalho Chehab, Sasha Levin, linux-media

From: Darius Rad <alpha@area49.net>

[ Upstream commit b20a6e298bcb8cb8ae18de26baaf462a6418515b ]

Allow selecting the IR protocol, MCE or iMON, for a device that
identifies as follows (with config id 0x7e):

15c2:ffdc SoundGraph Inc. iMON PAD Remote Controller

As the driver is structured to default to iMON when both RC
protocols are supported, existing users of this device (using MCE
protocol) will need to manually switch to MCE (RC-6) protocol from
userspace (with ir-keytable, sysfs).

Signed-off-by: Darius Rad <alpha@area49.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/imon.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 7bee72108b0ee..37a850421fbb1 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1826,12 +1826,17 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 		break;
 	/* iMON VFD, MCE IR */
 	case 0x46:
-	case 0x7e:
 	case 0x9e:
 		dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
 		allowed_protos = RC_PROTO_BIT_RC6_MCE;
 		break;
+	/* iMON VFD, iMON or MCE IR */
+	case 0x7e:
+		dev_info(ictx->dev, "0xffdc iMON VFD, iMON or MCE IR");
+		detected_display_type = IMON_DISPLAY_TYPE_VFD;
+		allowed_protos |= RC_PROTO_BIT_RC6_MCE;
+		break;
 	/* iMON LCD, MCE IR */
 	case 0x9f:
 		dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR");
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 068/185] dmaengine: iop-adma: use correct printk format strings
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (65 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 067/185] media: rc: imon: Allow iMON RC protocol for ffdc 7e device Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 069/185] ARM: xscale: fix multi-cpu compilation Sasha Levin
                   ` (116 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Arnd Bergmann, Vinod Koul, Sasha Levin, dmaengine

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 00c9755524fbaa28117be774d7c92fddb5ca02f3 ]

When compile-testing on other architectures, we get lots of warnings
about incorrect format strings, like:

   drivers/dma/iop-adma.c: In function 'iop_adma_alloc_slots':
   drivers/dma/iop-adma.c:307:6: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]

   drivers/dma/iop-adma.c: In function 'iop_adma_prep_dma_memcpy':
>> drivers/dma/iop-adma.c:518:40: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=]

Use %zu for printing size_t as required, and cast the dma_addr_t
arguments to 'u64' for printing with %llx. Ideally this should use
the %pad format string, but that requires an lvalue argument that
doesn't work here.

Link: https://lore.kernel.org/r/20190809163334.489360-3-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/iop-adma.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index c6c0143670d9d..a776857d89c8f 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -116,9 +116,9 @@ static void __iop_adma_slot_cleanup(struct iop_adma_chan *iop_chan)
 	list_for_each_entry_safe(iter, _iter, &iop_chan->chain,
 					chain_node) {
 		pr_debug("\tcookie: %d slot: %d busy: %d "
-			"this_desc: %#x next_desc: %#x ack: %d\n",
+			"this_desc: %#x next_desc: %#llx ack: %d\n",
 			iter->async_tx.cookie, iter->idx, busy,
-			iter->async_tx.phys, iop_desc_get_next_desc(iter),
+			iter->async_tx.phys, (u64)iop_desc_get_next_desc(iter),
 			async_tx_test_ack(&iter->async_tx));
 		prefetch(_iter);
 		prefetch(&_iter->async_tx);
@@ -306,9 +306,9 @@ iop_adma_alloc_slots(struct iop_adma_chan *iop_chan, int num_slots,
 				int i;
 				dev_dbg(iop_chan->device->common.dev,
 					"allocated slot: %d "
-					"(desc %p phys: %#x) slots_per_op %d\n",
+					"(desc %p phys: %#llx) slots_per_op %d\n",
 					iter->idx, iter->hw_desc,
-					iter->async_tx.phys, slots_per_op);
+					(u64)iter->async_tx.phys, slots_per_op);
 
 				/* pre-ack all but the last descriptor */
 				if (num_slots != slots_per_op)
@@ -516,7 +516,7 @@ iop_adma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dma_dest,
 		return NULL;
 	BUG_ON(len > IOP_ADMA_MAX_BYTE_COUNT);
 
-	dev_dbg(iop_chan->device->common.dev, "%s len: %u\n",
+	dev_dbg(iop_chan->device->common.dev, "%s len: %zu\n",
 		__func__, len);
 
 	spin_lock_bh(&iop_chan->lock);
@@ -549,7 +549,7 @@ iop_adma_prep_dma_xor(struct dma_chan *chan, dma_addr_t dma_dest,
 	BUG_ON(len > IOP_ADMA_XOR_MAX_BYTE_COUNT);
 
 	dev_dbg(iop_chan->device->common.dev,
-		"%s src_cnt: %d len: %u flags: %lx\n",
+		"%s src_cnt: %d len: %zu flags: %lx\n",
 		__func__, src_cnt, len, flags);
 
 	spin_lock_bh(&iop_chan->lock);
@@ -582,7 +582,7 @@ iop_adma_prep_dma_xor_val(struct dma_chan *chan, dma_addr_t *dma_src,
 	if (unlikely(!len))
 		return NULL;
 
-	dev_dbg(iop_chan->device->common.dev, "%s src_cnt: %d len: %u\n",
+	dev_dbg(iop_chan->device->common.dev, "%s src_cnt: %d len: %zu\n",
 		__func__, src_cnt, len);
 
 	spin_lock_bh(&iop_chan->lock);
@@ -620,7 +620,7 @@ iop_adma_prep_dma_pq(struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src,
 	BUG_ON(len > IOP_ADMA_XOR_MAX_BYTE_COUNT);
 
 	dev_dbg(iop_chan->device->common.dev,
-		"%s src_cnt: %d len: %u flags: %lx\n",
+		"%s src_cnt: %d len: %zu flags: %lx\n",
 		__func__, src_cnt, len, flags);
 
 	if (dmaf_p_disabled_continue(flags))
@@ -683,7 +683,7 @@ iop_adma_prep_dma_pq_val(struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src,
 		return NULL;
 	BUG_ON(len > IOP_ADMA_XOR_MAX_BYTE_COUNT);
 
-	dev_dbg(iop_chan->device->common.dev, "%s src_cnt: %d len: %u\n",
+	dev_dbg(iop_chan->device->common.dev, "%s src_cnt: %d len: %zu\n",
 		__func__, src_cnt, len);
 
 	spin_lock_bh(&iop_chan->lock);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 069/185] ARM: xscale: fix multi-cpu compilation
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (66 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 068/185] dmaengine: iop-adma: use correct printk format strings Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47   ` Sasha Levin
                   ` (115 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Arnd Bergmann, Sasha Levin

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit c7b68049943079550d4e6af0f10aa3aabd64131a ]

Building a combined ARMv4+XScale kernel produces these
and other build failures:

/tmp/copypage-xscale-3aa821.s: Assembler messages:
/tmp/copypage-xscale-3aa821.s:167: Error: selected processor does not support `pld [r7,#0]' in ARM mode
/tmp/copypage-xscale-3aa821.s:168: Error: selected processor does not support `pld [r7,#32]' in ARM mode
/tmp/copypage-xscale-3aa821.s:169: Error: selected processor does not support `pld [r1,#0]' in ARM mode
/tmp/copypage-xscale-3aa821.s:170: Error: selected processor does not support `pld [r1,#32]' in ARM mode
/tmp/copypage-xscale-3aa821.s:171: Error: selected processor does not support `pld [r7,#64]' in ARM mode
/tmp/copypage-xscale-3aa821.s:176: Error: selected processor does not support `ldrd r4,r5,[r7],#8' in ARM mode
/tmp/copypage-xscale-3aa821.s:180: Error: selected processor does not support `strd r4,r5,[r1],#8' in ARM mode

Add an explict .arch armv5 in the inline assembly to allow the ARMv5
specific instructions regardless of the compiler -march= target.

Link: https://lore.kernel.org/r/20190809163334.489360-5-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/copypage-xscale.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 61d834157bc05..382e1c2855e85 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -42,6 +42,7 @@ static void mc_copy_user_page(void *from, void *to)
 	 * when prefetching destination as well.  (NP)
 	 */
 	asm volatile ("\
+.arch xscale					\n\
 	pld	[%0, #0]			\n\
 	pld	[%0, #32]			\n\
 	pld	[%1, #0]			\n\
@@ -106,8 +107,9 @@ void
 xscale_mc_clear_user_highpage(struct page *page, unsigned long vaddr)
 {
 	void *ptr, *kaddr = kmap_atomic(page);
-	asm volatile(
-	"mov	r1, %2				\n\
+	asm volatile("\
+.arch xscale					\n\
+	mov	r1, %2				\n\
 	mov	r2, #0				\n\
 	mov	r3, #0				\n\
 1:	mov	ip, %0				\n\
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 070/185] perf ftrace: Use CAP_SYS_ADMIN instead of euid==0
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:47   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Igor Lubashev, Jiri Olsa, Alexander Shishkin, Alexey Budankov,
	James Morris, Mathieu Poirier, Namhyung Kim, Peter Zijlstra,
	Suzuki Poulouse, linux-arm-kernel, Arnaldo Carvalho de Melo,
	Sasha Levin

From: Igor Lubashev <ilubashe@akamai.com>

[ Upstream commit c766f3df635de14295e410c6dd5410bc416c24a0 ]

The kernel requires CAP_SYS_ADMIN instead of euid==0 to mount debugfs
for ftrace.  Make perf do the same.

Signed-off-by: Igor Lubashev <ilubashe@akamai.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/bd8763b72ed4d58d0b42d44fbc7eb474d32e53a3.1565188228.git.ilubashe@akamai.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-ftrace.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/tools/perf/builtin-ftrace.c b/tools/perf/builtin-ftrace.c
index 22386ab350504..2026364a61dc2 100644
--- a/tools/perf/builtin-ftrace.c
+++ b/tools/perf/builtin-ftrace.c
@@ -13,6 +13,7 @@
 #include <signal.h>
 #include <fcntl.h>
 #include <poll.h>
+#include <linux/capability.h>
 
 #include "debug.h"
 #include <subcmd/parse-options.h>
@@ -21,6 +22,7 @@
 #include "target.h"
 #include "cpumap.h"
 #include "thread_map.h"
+#include "util/cap.h"
 #include "util/config.h"
 
 
@@ -281,7 +283,7 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv)
 		.events = POLLIN,
 	};
 
-	if (geteuid() != 0) {
+	if (!perf_cap__capable(CAP_SYS_ADMIN)) {
 		pr_err("ftrace only works for root!\n");
 		return -1;
 	}
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 070/185] perf ftrace: Use CAP_SYS_ADMIN instead of euid==0
@ 2019-09-22 18:47   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Mathieu Poirier, Suzuki Poulouse,
	Alexander Shishkin, Alexey Budankov, Igor Lubashev, James Morris,
	Arnaldo Carvalho de Melo, Peter Zijlstra, Jiri Olsa,
	Namhyung Kim, linux-arm-kernel

From: Igor Lubashev <ilubashe@akamai.com>

[ Upstream commit c766f3df635de14295e410c6dd5410bc416c24a0 ]

The kernel requires CAP_SYS_ADMIN instead of euid==0 to mount debugfs
for ftrace.  Make perf do the same.

Signed-off-by: Igor Lubashev <ilubashe@akamai.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/bd8763b72ed4d58d0b42d44fbc7eb474d32e53a3.1565188228.git.ilubashe@akamai.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-ftrace.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/tools/perf/builtin-ftrace.c b/tools/perf/builtin-ftrace.c
index 22386ab350504..2026364a61dc2 100644
--- a/tools/perf/builtin-ftrace.c
+++ b/tools/perf/builtin-ftrace.c
@@ -13,6 +13,7 @@
 #include <signal.h>
 #include <fcntl.h>
 #include <poll.h>
+#include <linux/capability.h>
 
 #include "debug.h"
 #include <subcmd/parse-options.h>
@@ -21,6 +22,7 @@
 #include "target.h"
 #include "cpumap.h"
 #include "thread_map.h"
+#include "util/cap.h"
 #include "util/config.h"
 
 
@@ -281,7 +283,7 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv)
 		.events = POLLIN,
 	};
 
-	if (geteuid() != 0) {
+	if (!perf_cap__capable(CAP_SYS_ADMIN)) {
 		pr_err("ftrace only works for root!\n");
 		return -1;
 	}
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 071/185] perf record: Support aarch64 random socket_id assignment
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (68 preceding siblings ...)
  2019-09-22 18:47   ` Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 072/185] ALSA: hda: Add codec on bus address table lately Sasha Levin
                   ` (113 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tan Xiaojun, Jiri Olsa, Alexander Shishkin, Alexey Budankov,
	Kan Liang, Namhyung Kim, Peter Zijlstra, Song Liu,
	Steven Rostedt, Tzvetomir Stoyanov, Arnaldo Carvalho de Melo,
	Sasha Levin

From: Tan Xiaojun <tanxiaojun@huawei.com>

[ Upstream commit 0a4d8fb229dd78f9e0752817339e19e903b37a60 ]

Same as in the commit 01766229533f ("perf record: Support s390 random
socket_id assignment"), aarch64 also have this problem.

Without this fix:

  [root@localhost perf]# ./perf report --header -I -v
  ...
  socket_id number is too big.You may need to upgrade the perf tool.

  # ========
  # captured on    : Thu Aug  1 22:58:38 2019
  # header version : 1
  ...
  # Core ID and Socket ID information is not available
  ...

With this fix:
  [root@localhost perf]# ./perf report --header -I -v
  ...
  cpumask list: 0-31
  cpumask list: 32-63
  cpumask list: 64-95
  cpumask list: 96-127

  # ========
  # captured on    : Thu Aug  1 22:58:38 2019
  # header version : 1
  ...
  # CPU 0: Core ID 0, Socket ID 36
  # CPU 1: Core ID 1, Socket ID 36
  ...
  # CPU 126: Core ID 126, Socket ID 8442
  # CPU 127: Core ID 127, Socket ID 8442
  ...

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Link: http://lkml.kernel.org/r/1564717737-21602-1-git-send-email-tanxiaojun@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/header.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index abe9af8679678..1bc72fe47c2da 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -2205,8 +2205,10 @@ static int process_cpu_topology(struct feat_fd *ff, void *data __maybe_unused)
 	/* On s390 the socket_id number is not related to the numbers of cpus.
 	 * The socket_id number might be higher than the numbers of cpus.
 	 * This depends on the configuration.
+	 * AArch64 is the same.
 	 */
-	if (ph->env.arch && !strncmp(ph->env.arch, "s390", 4))
+	if (ph->env.arch && (!strncmp(ph->env.arch, "s390", 4)
+			  || !strncmp(ph->env.arch, "aarch64", 7)))
 		do_core_id_test = false;
 
 	for (i = 0; i < (u32)cpu_nr; i++) {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 072/185] ALSA: hda: Add codec on bus address table lately
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (69 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 071/185] perf record: Support aarch64 random socket_id assignment Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 19:06   ` Takashi Iwai
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 073/185] media: vsp1: fix memory leak of dl on error return path Sasha Levin
                   ` (112 subsequent siblings)
  183 siblings, 1 reply; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Takashi Iwai, Sasha Levin

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit ee5f85d9290fe25d460bd320b7fe073075d72d33 ]

The call of snd_hdac_bus_add_device() is needed only for registering
the codec onto the bus caddr_tbl[] that is referred essentially only
in the unsol event handler.  That is, the reason of this call and the
release by the counter-part function snd_hdac_bus_remove_device() is
just to assure that the unsol event gets notified to the codec.

But the current implementation of the unsol notification wouldn't work
properly when the codec is still in a premature init state.  So this
patch tries to work around it by delaying the caddr_tbl[] registration
at the point of snd_hdac_device_register().

Also, the order of snd_hdac_bus_remove_device() and device_del() calls
are shuffled to make sure that the unsol event is masked before
deleting the device.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204565
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/hdac_device.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c
index 3842f9d34b7cf..02b2950d1d0e6 100644
--- a/sound/hda/hdac_device.c
+++ b/sound/hda/hdac_device.c
@@ -61,10 +61,6 @@ int snd_hdac_device_init(struct hdac_device *codec, struct hdac_bus *bus,
 	pm_runtime_get_noresume(&codec->dev);
 	atomic_set(&codec->in_pm, 0);
 
-	err = snd_hdac_bus_add_device(bus, codec);
-	if (err < 0)
-		goto error;
-
 	/* fill parameters */
 	codec->vendor_id = snd_hdac_read_parm(codec, AC_NODE_ROOT,
 					      AC_PAR_VENDOR_ID);
@@ -143,15 +139,22 @@ int snd_hdac_device_register(struct hdac_device *codec)
 	err = device_add(&codec->dev);
 	if (err < 0)
 		return err;
+	err = snd_hdac_bus_add_device(codec->bus, codec);
+	if (err < 0)
+		goto error;
 	mutex_lock(&codec->widget_lock);
 	err = hda_widget_sysfs_init(codec);
 	mutex_unlock(&codec->widget_lock);
-	if (err < 0) {
-		device_del(&codec->dev);
-		return err;
-	}
+	if (err < 0)
+		goto error_remove;
 
 	return 0;
+
+ error_remove:
+	snd_hdac_bus_remove_device(codec->bus, codec);
+ error:
+	device_del(&codec->dev);
+	return err;
 }
 EXPORT_SYMBOL_GPL(snd_hdac_device_register);
 
@@ -165,8 +168,8 @@ void snd_hdac_device_unregister(struct hdac_device *codec)
 		mutex_lock(&codec->widget_lock);
 		hda_widget_sysfs_exit(codec);
 		mutex_unlock(&codec->widget_lock);
-		device_del(&codec->dev);
 		snd_hdac_bus_remove_device(codec->bus, codec);
+		device_del(&codec->dev);
 	}
 }
 EXPORT_SYMBOL_GPL(snd_hdac_device_unregister);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 073/185] media: vsp1: fix memory leak of dl on error return path
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (70 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 072/185] ALSA: hda: Add codec on bus address table lately Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 074/185] media: i2c: ov5645: Fix power sequence Sasha Levin
                   ` (111 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Colin Ian King, Kieran Bingham, Laurent Pinchart,
	Mauro Carvalho Chehab, Sasha Levin, linux-media,
	linux-renesas-soc

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 70c55c1ad1a76e804ee5330e134674f5d2741cb7 ]

Currently when the call vsp1_dl_body_get fails and returns null the
error return path leaks the allocation of dl. Fix this by kfree'ing
dl before returning.

Addresses-Coverity: ("Resource leak")

Fixes: 5d7936b8e27d ("media: vsp1: Convert display lists to use new body pool")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/vsp1/vsp1_dl.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/vsp1/vsp1_dl.c b/drivers/media/platform/vsp1/vsp1_dl.c
index 104b6f5145364..d7b43037e500a 100644
--- a/drivers/media/platform/vsp1/vsp1_dl.c
+++ b/drivers/media/platform/vsp1/vsp1_dl.c
@@ -557,8 +557,10 @@ static struct vsp1_dl_list *vsp1_dl_list_alloc(struct vsp1_dl_manager *dlm)
 
 	/* Get a default body for our list. */
 	dl->body0 = vsp1_dl_body_get(dlm->pool);
-	if (!dl->body0)
+	if (!dl->body0) {
+		kfree(dl);
 		return NULL;
+	}
 
 	header_offset = dl->body0->max_entries * sizeof(*dl->body0->entries);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 074/185] media: i2c: ov5645: Fix power sequence
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (71 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 073/185] media: vsp1: fix memory leak of dl on error return path Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 075/185] media: omap3isp: Don't set streaming state on random subdevs Sasha Levin
                   ` (110 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ezequiel Garcia, Fabio Estevam, Philipp Zabel, Jacopo Mondi,
	Sakari Ailus, Mauro Carvalho Chehab, Sasha Levin, linux-media

From: Ezequiel Garcia <ezequiel@collabora.com>

[ Upstream commit 092e8eb90a7dc7dd210cd4e2ea36075d0a7f96af ]

This is mostly a port of Jacopo's fix:

  commit aa4bb8b8838ffcc776a79f49a4d7476b82405349
  Author: Jacopo Mondi <jacopo@jmondi.org>
  Date:   Fri Jul 6 05:51:52 2018 -0400

  media: ov5640: Re-work MIPI startup sequence

In the OV5645 case, the changes are:

- At set_power(1) time power up MIPI Tx/Rx and set data and clock lanes in
  LP11 during 'sleep' and 'idle' with MIPI clock in non-continuous mode.
- At set_power(0) time power down MIPI Tx/Rx (in addition to the current
  power down of regulators and clock gating).
- At s_stream time enable/disable the MIPI interface output.

With this commit the sensor is able to enter LP-11 mode during power up,
as expected by some CSI-2 controllers.

Many thanks to Fabio Estevam for his help debugging this issue.

Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov5645.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index 124c8df046337..58972c884705c 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -45,6 +45,8 @@
 #define		OV5645_CHIP_ID_HIGH_BYTE	0x56
 #define OV5645_CHIP_ID_LOW		0x300b
 #define		OV5645_CHIP_ID_LOW_BYTE		0x45
+#define OV5645_IO_MIPI_CTRL00		0x300e
+#define OV5645_PAD_OUTPUT00		0x3019
 #define OV5645_AWB_MANUAL_CONTROL	0x3406
 #define		OV5645_AWB_MANUAL_ENABLE	BIT(0)
 #define OV5645_AEC_PK_MANUAL		0x3503
@@ -55,6 +57,7 @@
 #define		OV5645_ISP_VFLIP		BIT(2)
 #define OV5645_TIMING_TC_REG21		0x3821
 #define		OV5645_SENSOR_MIRROR		BIT(1)
+#define OV5645_MIPI_CTRL00		0x4800
 #define OV5645_PRE_ISP_TEST_SETTING_1	0x503d
 #define		OV5645_TEST_PATTERN_MASK	0x3
 #define		OV5645_SET_TEST_PATTERN(x)	((x) & OV5645_TEST_PATTERN_MASK)
@@ -121,7 +124,6 @@ static const struct reg_value ov5645_global_init_setting[] = {
 	{ 0x3503, 0x07 },
 	{ 0x3002, 0x1c },
 	{ 0x3006, 0xc3 },
-	{ 0x300e, 0x45 },
 	{ 0x3017, 0x00 },
 	{ 0x3018, 0x00 },
 	{ 0x302e, 0x0b },
@@ -350,7 +352,10 @@ static const struct reg_value ov5645_global_init_setting[] = {
 	{ 0x3a1f, 0x14 },
 	{ 0x0601, 0x02 },
 	{ 0x3008, 0x42 },
-	{ 0x3008, 0x02 }
+	{ 0x3008, 0x02 },
+	{ OV5645_IO_MIPI_CTRL00, 0x40 },
+	{ OV5645_MIPI_CTRL00, 0x24 },
+	{ OV5645_PAD_OUTPUT00, 0x70 }
 };
 
 static const struct reg_value ov5645_setting_sxga[] = {
@@ -737,13 +742,9 @@ static int ov5645_s_power(struct v4l2_subdev *sd, int on)
 				goto exit;
 			}
 
-			ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0,
-					       OV5645_SYSTEM_CTRL0_STOP);
-			if (ret < 0) {
-				ov5645_set_power_off(ov5645);
-				goto exit;
-			}
+			usleep_range(500, 1000);
 		} else {
+			ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
 			ov5645_set_power_off(ov5645);
 		}
 	}
@@ -1049,11 +1050,20 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
 			dev_err(ov5645->dev, "could not sync v4l2 controls\n");
 			return ret;
 		}
+
+		ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x45);
+		if (ret < 0)
+			return ret;
+
 		ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0,
 				       OV5645_SYSTEM_CTRL0_START);
 		if (ret < 0)
 			return ret;
 	} else {
+		ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x40);
+		if (ret < 0)
+			return ret;
+
 		ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0,
 				       OV5645_SYSTEM_CTRL0_STOP);
 		if (ret < 0)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 075/185] media: omap3isp: Don't set streaming state on random subdevs
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (72 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 074/185] media: i2c: ov5645: Fix power sequence Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47   ` Sasha Levin
                   ` (109 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sakari Ailus, Laurent Pinchart, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: Sakari Ailus <sakari.ailus@linux.intel.com>

[ Upstream commit 7ef57be07ac146e70535747797ef4aee0f06e9f9 ]

The streaming state should be set to the first upstream sub-device only,
not everywhere, for a sub-device driver itself knows how to best control
the streaming state of its own upstream sub-devices.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/omap3isp/isp.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 38849f0ba09d3..8a87f427c056e 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -719,6 +719,10 @@ static int isp_pipeline_enable(struct isp_pipeline *pipe,
 					s_stream, mode);
 			pipe->do_propagation = true;
 		}
+
+		/* Stop at the first external sub-device. */
+		if (subdev->dev != isp->dev)
+			break;
 	}
 
 	return 0;
@@ -833,6 +837,10 @@ static int isp_pipeline_disable(struct isp_pipeline *pipe)
 						      &subdev->entity);
 			failure = -ETIMEDOUT;
 		}
+
+		/* Stop at the first external sub-device. */
+		if (subdev->dev != isp->dev)
+			break;
 	}
 
 	return failure;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 076/185] media: imx: mipi csi-2: Don't fail if initial state times-out
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:47   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ezequiel Garcia, Fabio Estevam, Steve Longerbeam, Philipp Zabel,
	Sakari Ailus, Mauro Carvalho Chehab, Sasha Levin, linux-media,
	devel

From: Ezequiel Garcia <ezequiel@collabora.com>

[ Upstream commit 0d5078c7172c46db6c58718d817b9fcf769554b4 ]

Not all sensors will be able to guarantee a proper initial state.
This may be either because the driver is not properly written,
or (probably unlikely) because the hardware won't support it.

While the right solution in the former case is to fix the sensor
driver, the real world not always allows right solutions, due to lack
of available documentation and support on these sensors.

Let's relax this requirement, and allow the driver to support stream start,
even if the sensor initial sequence wasn't the expected.

Also improve the warning message to better explain the problem and provide
a hint that the sensor driver needs to be fixed.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx6-mipi-csi2.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/media/imx/imx6-mipi-csi2.c b/drivers/staging/media/imx/imx6-mipi-csi2.c
index f29e28df36ed8..bfa4b254c4e48 100644
--- a/drivers/staging/media/imx/imx6-mipi-csi2.c
+++ b/drivers/staging/media/imx/imx6-mipi-csi2.c
@@ -243,7 +243,7 @@ static int __maybe_unused csi2_dphy_wait_ulp(struct csi2_dev *csi2)
 }
 
 /* Waits for low-power LP-11 state on data and clock lanes. */
-static int csi2_dphy_wait_stopstate(struct csi2_dev *csi2)
+static void csi2_dphy_wait_stopstate(struct csi2_dev *csi2)
 {
 	u32 mask, reg;
 	int ret;
@@ -254,11 +254,9 @@ static int csi2_dphy_wait_stopstate(struct csi2_dev *csi2)
 	ret = readl_poll_timeout(csi2->base + CSI2_PHY_STATE, reg,
 				 (reg & mask) == mask, 0, 500000);
 	if (ret) {
-		v4l2_err(&csi2->sd, "LP-11 timeout, phy_state = 0x%08x\n", reg);
-		return ret;
+		v4l2_warn(&csi2->sd, "LP-11 wait timeout, likely a sensor driver bug, expect capture failures.\n");
+		v4l2_warn(&csi2->sd, "phy_state = 0x%08x\n", reg);
 	}
-
-	return 0;
 }
 
 /* Wait for active clock on the clock lane. */
@@ -316,9 +314,7 @@ static int csi2_start(struct csi2_dev *csi2)
 	csi2_enable(csi2, true);
 
 	/* Step 5 */
-	ret = csi2_dphy_wait_stopstate(csi2);
-	if (ret)
-		goto err_assert_reset;
+	csi2_dphy_wait_stopstate(csi2);
 
 	/* Step 6 */
 	ret = v4l2_subdev_call(csi2->src_sd, video, s_stream, 1);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 076/185] media: imx: mipi csi-2: Don't fail if initial state times-out
@ 2019-09-22 18:47   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devel, Philipp Zabel, Ezequiel Garcia, Sakari Ailus,
	Steve Longerbeam, Mauro Carvalho Chehab, linux-media

From: Ezequiel Garcia <ezequiel@collabora.com>

[ Upstream commit 0d5078c7172c46db6c58718d817b9fcf769554b4 ]

Not all sensors will be able to guarantee a proper initial state.
This may be either because the driver is not properly written,
or (probably unlikely) because the hardware won't support it.

While the right solution in the former case is to fix the sensor
driver, the real world not always allows right solutions, due to lack
of available documentation and support on these sensors.

Let's relax this requirement, and allow the driver to support stream start,
even if the sensor initial sequence wasn't the expected.

Also improve the warning message to better explain the problem and provide
a hint that the sensor driver needs to be fixed.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx6-mipi-csi2.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/media/imx/imx6-mipi-csi2.c b/drivers/staging/media/imx/imx6-mipi-csi2.c
index f29e28df36ed8..bfa4b254c4e48 100644
--- a/drivers/staging/media/imx/imx6-mipi-csi2.c
+++ b/drivers/staging/media/imx/imx6-mipi-csi2.c
@@ -243,7 +243,7 @@ static int __maybe_unused csi2_dphy_wait_ulp(struct csi2_dev *csi2)
 }
 
 /* Waits for low-power LP-11 state on data and clock lanes. */
-static int csi2_dphy_wait_stopstate(struct csi2_dev *csi2)
+static void csi2_dphy_wait_stopstate(struct csi2_dev *csi2)
 {
 	u32 mask, reg;
 	int ret;
@@ -254,11 +254,9 @@ static int csi2_dphy_wait_stopstate(struct csi2_dev *csi2)
 	ret = readl_poll_timeout(csi2->base + CSI2_PHY_STATE, reg,
 				 (reg & mask) == mask, 0, 500000);
 	if (ret) {
-		v4l2_err(&csi2->sd, "LP-11 timeout, phy_state = 0x%08x\n", reg);
-		return ret;
+		v4l2_warn(&csi2->sd, "LP-11 wait timeout, likely a sensor driver bug, expect capture failures.\n");
+		v4l2_warn(&csi2->sd, "phy_state = 0x%08x\n", reg);
 	}
-
-	return 0;
 }
 
 /* Wait for active clock on the clock lane. */
@@ -316,9 +314,7 @@ static int csi2_start(struct csi2_dev *csi2)
 	csi2_enable(csi2, true);
 
 	/* Step 5 */
-	ret = csi2_dphy_wait_stopstate(csi2);
-	if (ret)
-		goto err_assert_reset;
+	csi2_dphy_wait_stopstate(csi2);
 
 	/* Step 6 */
 	ret = v4l2_subdev_call(csi2->src_sd, video, s_stream, 1);
-- 
2.20.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 077/185] kasan/arm64: fix CONFIG_KASAN_SW_TAGS && KASAN_INLINE
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (74 preceding siblings ...)
  2019-09-22 18:47   ` Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 078/185] ASoC: mediatek: mt6358: add delay after dmic clock on Sasha Levin
                   ` (107 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Mark Rutland, Catalin Marinas, Andrey Ryabinin, Will Deacon,
	Sasha Levin, kasan-dev, linux-kbuild

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit 34b5560db40d2941cfbe82eca1641353d5aed1a9 ]

The generic Makefile.kasan propagates CONFIG_KASAN_SHADOW_OFFSET into
KASAN_SHADOW_OFFSET, but only does so for CONFIG_KASAN_GENERIC.

Since commit:

  6bd1d0be0e97936d ("arm64: kasan: Switch to using KASAN_SHADOW_OFFSET")

... arm64 defines CONFIG_KASAN_SHADOW_OFFSET in Kconfig rather than
defining KASAN_SHADOW_OFFSET in a Makefile. Thus, if
CONFIG_KASAN_SW_TAGS && KASAN_INLINE are selected, we get build time
splats due to KASAN_SHADOW_OFFSET not being set:

| [mark@lakrids:~/src/linux]% usellvm 8.0.1 usekorg 8.1.0  make ARCH=arm64 CROSS_COMPILE=aarch64-linux- CC=clang
| scripts/kconfig/conf  --syncconfig Kconfig
|   CC      scripts/mod/empty.o
| clang (LLVM option parsing): for the -hwasan-mapping-offset option: '' value invalid for uint argument!
| scripts/Makefile.build:273: recipe for target 'scripts/mod/empty.o' failed
| make[1]: *** [scripts/mod/empty.o] Error 1
| Makefile:1123: recipe for target 'prepare0' failed
| make: *** [prepare0] Error 2

Let's fix this by always propagating CONFIG_KASAN_SHADOW_OFFSET into
KASAN_SHADOW_OFFSET if CONFIG_KASAN is selected, moving the existing
common definition of +CFLAGS_KASAN_NOSANITIZE to the top of
Makefile.kasan.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Tested-by Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/Makefile.kasan | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/scripts/Makefile.kasan b/scripts/Makefile.kasan
index 6410bd22fe387..03757cc60e06c 100644
--- a/scripts/Makefile.kasan
+++ b/scripts/Makefile.kasan
@@ -1,4 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
+ifdef CONFIG_KASAN
+CFLAGS_KASAN_NOSANITIZE := -fno-builtin
+KASAN_SHADOW_OFFSET ?= $(CONFIG_KASAN_SHADOW_OFFSET)
+endif
+
 ifdef CONFIG_KASAN_GENERIC
 
 ifdef CONFIG_KASAN_INLINE
@@ -7,8 +12,6 @@ else
 	call_threshold := 0
 endif
 
-KASAN_SHADOW_OFFSET ?= $(CONFIG_KASAN_SHADOW_OFFSET)
-
 CFLAGS_KASAN_MINIMAL := -fsanitize=kernel-address
 
 cc-param = $(call cc-option, -mllvm -$(1), $(call cc-option, --param $(1)))
@@ -45,7 +48,3 @@ CFLAGS_KASAN := -fsanitize=kernel-hwaddress \
 		$(instrumentation_flags)
 
 endif # CONFIG_KASAN_SW_TAGS
-
-ifdef CONFIG_KASAN
-CFLAGS_KASAN_NOSANITIZE := -fno-builtin
-endif
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 078/185] ASoC: mediatek: mt6358: add delay after dmic clock on
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (75 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 077/185] kasan/arm64: fix CONFIG_KASAN_SW_TAGS && KASAN_INLINE Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 079/185] net: lpc-enet: fix printk format strings Sasha Levin
                   ` (106 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Jiaxin Yu, Mark Brown, Sasha Levin

From: Jiaxin Yu <jiaxin.yu@mediatek.com>

[ Upstream commit ccb1fa21ef58a2ac15519bb878470762e967e8b3 ]

Most dmics produce a high level when they receive clock. The difference
between power-on and memory record time is about 10ms, but the dmic
needs 50ms to output normal data.

This commit add 100ms delay after SoC output clock so that we can cut
off the pop noise at the beginning.

Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/1564980997-11359-1-git-send-email-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/mt6358.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/codecs/mt6358.c b/sound/soc/codecs/mt6358.c
index 50b3fc5457ea7..cab208aa22a77 100644
--- a/sound/soc/codecs/mt6358.c
+++ b/sound/soc/codecs/mt6358.c
@@ -1730,6 +1730,10 @@ static int mt6358_dmic_enable(struct mt6358_priv *priv)
 
 	/* UL turn on */
 	regmap_write(priv->regmap, MT6358_AFE_UL_SRC_CON0_L, 0x0003);
+
+	/* Prevent pop noise form dmic hw */
+	msleep(100);
+
 	return 0;
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 079/185] net: lpc-enet: fix printk format strings
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (76 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 078/185] ASoC: mediatek: mt6358: add delay after dmic clock on Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 080/185] m68k: Prevent some compiler warnings in Coldfire builds Sasha Levin
                   ` (105 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Arnd Bergmann, kbuild test robot, Sasha Levin, netdev

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit de6f97b2bace0e2eb6c3a86e124d1e652a587b56 ]

compile-testing this driver on other architectures showed
multiple warnings:

  drivers/net/ethernet/nxp/lpc_eth.c: In function 'lpc_eth_drv_probe':
  drivers/net/ethernet/nxp/lpc_eth.c:1337:19: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]

  drivers/net/ethernet/nxp/lpc_eth.c:1342:19: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]

Use format strings that work on all architectures.

Link: https://lore.kernel.org/r/20190809144043.476786-10-arnd@arndb.de
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/nxp/lpc_eth.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index f7e11f1b0426c..b0c8be127bee1 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -1344,13 +1344,14 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
 	pldat->dma_buff_base_p = dma_handle;
 
 	netdev_dbg(ndev, "IO address space     :%pR\n", res);
-	netdev_dbg(ndev, "IO address size      :%d\n", resource_size(res));
+	netdev_dbg(ndev, "IO address size      :%zd\n",
+			(size_t)resource_size(res));
 	netdev_dbg(ndev, "IO address (mapped)  :0x%p\n",
 			pldat->net_base);
 	netdev_dbg(ndev, "IRQ number           :%d\n", ndev->irq);
-	netdev_dbg(ndev, "DMA buffer size      :%d\n", pldat->dma_buff_size);
-	netdev_dbg(ndev, "DMA buffer P address :0x%08x\n",
-			pldat->dma_buff_base_p);
+	netdev_dbg(ndev, "DMA buffer size      :%zd\n", pldat->dma_buff_size);
+	netdev_dbg(ndev, "DMA buffer P address :%pad\n",
+			&pldat->dma_buff_base_p);
 	netdev_dbg(ndev, "DMA buffer V address :0x%p\n",
 			pldat->dma_buff_base_v);
 
@@ -1397,8 +1398,8 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_out_unregister_netdev;
 
-	netdev_info(ndev, "LPC mac at 0x%08x irq %d\n",
-	       res->start, ndev->irq);
+	netdev_info(ndev, "LPC mac at 0x%08lx irq %d\n",
+	       (unsigned long)res->start, ndev->irq);
 
 	device_init_wakeup(dev, 1);
 	device_set_wakeup_enable(dev, 0);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 080/185] m68k: Prevent some compiler warnings in Coldfire builds
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (77 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 079/185] net: lpc-enet: fix printk format strings Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47   ` Sasha Levin
                   ` (104 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Finn Thain, Greg Ungerer, Geert Uytterhoeven, Sasha Levin, linux-m68k

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 94c04390225bcd8283103fd0c04be20cc30cc979 ]

Since commit d3b41b6bb49e ("m68k: Dispatch nvram_ops calls to Atari or
Mac functions"), Coldfire builds generate compiler warnings due to the
unconditional inclusion of asm/atarihw.h and asm/macintosh.h.

The inclusion of asm/atarihw.h causes warnings like this:

In file included from ./arch/m68k/include/asm/atarihw.h:25:0,
                 from arch/m68k/kernel/setup_mm.c:41,
                 from arch/m68k/kernel/setup.c:3:
./arch/m68k/include/asm/raw_io.h:39:0: warning: "__raw_readb" redefined
 #define __raw_readb in_8

In file included from ./arch/m68k/include/asm/io.h:6:0,
                 from arch/m68k/kernel/setup_mm.c:36,
                 from arch/m68k/kernel/setup.c:3:
./arch/m68k/include/asm/io_no.h:16:0: note: this is the location of the previous definition
 #define __raw_readb(addr) \
...

This issue is resolved by dropping the asm/raw_io.h include. It turns out
that asm/io_mm.h already includes that header file.

Moving the relevant macro definitions helps to clarify this dependency
and make it safe to include asm/atarihw.h.

The other warnings look like this:

In file included from arch/m68k/kernel/setup_mm.c:48:0,
                 from arch/m68k/kernel/setup.c:3:
./arch/m68k/include/asm/macintosh.h:19:35: warning: 'struct irq_data' declared inside parameter list will not be visible outside of this definition or declaration
 extern void mac_irq_enable(struct irq_data *data);
                                   ^~~~~~~~
...

This issue is resolved by adding the missing linux/irq.h include.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/include/asm/atarihw.h   | 9 ---------
 arch/m68k/include/asm/io_mm.h     | 6 +++++-
 arch/m68k/include/asm/macintosh.h | 1 +
 3 files changed, 6 insertions(+), 10 deletions(-)

diff --git a/arch/m68k/include/asm/atarihw.h b/arch/m68k/include/asm/atarihw.h
index 533008262b691..5e5601c382b80 100644
--- a/arch/m68k/include/asm/atarihw.h
+++ b/arch/m68k/include/asm/atarihw.h
@@ -22,7 +22,6 @@
 
 #include <linux/types.h>
 #include <asm/bootinfo-atari.h>
-#include <asm/raw_io.h>
 #include <asm/kmap.h>
 
 extern u_long atari_mch_cookie;
@@ -132,14 +131,6 @@ extern struct atari_hw_present atari_hw_present;
  */
 
 
-#define atari_readb   raw_inb
-#define atari_writeb  raw_outb
-
-#define atari_inb_p   raw_inb
-#define atari_outb_p  raw_outb
-
-
-
 #include <linux/mm.h>
 #include <asm/cacheflush.h>
 
diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h
index 6c03ca5bc4365..819f611dccf28 100644
--- a/arch/m68k/include/asm/io_mm.h
+++ b/arch/m68k/include/asm/io_mm.h
@@ -29,7 +29,11 @@
 #include <asm-generic/iomap.h>
 
 #ifdef CONFIG_ATARI
-#include <asm/atarihw.h>
+#define atari_readb   raw_inb
+#define atari_writeb  raw_outb
+
+#define atari_inb_p   raw_inb
+#define atari_outb_p  raw_outb
 #endif
 
 
diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h
index d9a08bed4b128..f653b60f2afcf 100644
--- a/arch/m68k/include/asm/macintosh.h
+++ b/arch/m68k/include/asm/macintosh.h
@@ -4,6 +4,7 @@
 
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 
 #include <asm/bootinfo-mac.h>
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 081/185] ARM: dts: imx7d: cl-som-imx7: make ethernet work again
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:47   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: André Draszik, Ilya Ledvich, Igor Grinberg, Rob Herring,
	Mark Rutland, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
	Fabio Estevam, NXP Linux Team, devicetree, linux-arm-kernel,
	Sasha Levin

From: André Draszik <git@andred.net>

[ Upstream commit 9846a4524ac90b63496580b7ad50674b40d92a8f ]

Recent changes to the atheros at803x driver caused
ethernet to stop working on this board.
In particular commit 6d4cd041f0af
("net: phy: at803x: disable delay only for RGMII mode")
and commit cd28d1d6e52e
("net: phy: at803x: Disable phy delay for RGMII mode")
fix the AR8031 driver to configure the phy's (RX/TX)
delays as per the 'phy-mode' in the device tree.

This now prevents ethernet from working on this board.

It used to work before those commits, because the
AR8031 comes out of reset with RX delay enabled, and
the at803x driver didn't touch the delay configuration
at all when "rgmii" mode was selected, and because
arch/arm/mach-imx/mach-imx7d.c:ar8031_phy_fixup()
unconditionally enables TX delay.

Since above commits ar8031_phy_fixup() also has no
effect anymore, and the end-result is that all delays
are disabled in the phy, no ethernet.

Update the device tree to restore functionality.

Signed-off-by: André Draszik <git@andred.net>
CC: Ilya Ledvich <ilya@compulab.co.il>
CC: Igor Grinberg <grinberg@compulab.co.il>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
CC: devicetree@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index e61567437d73c..62d5e9a4a7818 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -44,7 +44,7 @@
 			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	fsl,magic-packet;
 	status = "okay";
@@ -70,7 +70,7 @@
 			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 	fsl,magic-packet;
 	status = "okay";
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 081/185] ARM: dts: imx7d: cl-som-imx7: make ethernet work again
@ 2019-09-22 18:47   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Mark Rutland, devicetree, Fabio Estevam, linux-arm-kernel,
	Sasha Levin, André Draszik, Sascha Hauer, Rob Herring,
	Igor Grinberg, Pengutronix Kernel Team, Shawn Guo, Ilya Ledvich,
	NXP Linux Team

From: André Draszik <git@andred.net>

[ Upstream commit 9846a4524ac90b63496580b7ad50674b40d92a8f ]

Recent changes to the atheros at803x driver caused
ethernet to stop working on this board.
In particular commit 6d4cd041f0af
("net: phy: at803x: disable delay only for RGMII mode")
and commit cd28d1d6e52e
("net: phy: at803x: Disable phy delay for RGMII mode")
fix the AR8031 driver to configure the phy's (RX/TX)
delays as per the 'phy-mode' in the device tree.

This now prevents ethernet from working on this board.

It used to work before those commits, because the
AR8031 comes out of reset with RX delay enabled, and
the at803x driver didn't touch the delay configuration
at all when "rgmii" mode was selected, and because
arch/arm/mach-imx/mach-imx7d.c:ar8031_phy_fixup()
unconditionally enables TX delay.

Since above commits ar8031_phy_fixup() also has no
effect anymore, and the end-result is that all delays
are disabled in the phy, no ethernet.

Update the device tree to restore functionality.

Signed-off-by: André Draszik <git@andred.net>
CC: Ilya Ledvich <ilya@compulab.co.il>
CC: Igor Grinberg <grinberg@compulab.co.il>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
CC: devicetree@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index e61567437d73c..62d5e9a4a7818 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -44,7 +44,7 @@
 			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	fsl,magic-packet;
 	status = "okay";
@@ -70,7 +70,7 @@
 			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 	fsl,magic-packet;
 	status = "okay";
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 082/185] ARM: dts: imx7-colibri: disable HS400
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (79 preceding siblings ...)
  2019-09-22 18:47   ` Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 083/185] x86/platform/intel/iosf_mbi Rewrite locking Sasha Levin
                   ` (102 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Stefan Agner, Philippe Schenker, Oleksandr Suvorov, Shawn Guo,
	Sasha Levin, devicetree

From: Stefan Agner <stefan.agner@toradex.com>

[ Upstream commit a95fbda08ee20cd063ce5826e0df95a2c22ea8c5 ]

Force HS200 by masking bit 63 of the SDHCI capability register.
The i.MX ESDHC driver uses SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400. With
that the stack checks bit 63 to descide whether HS400 is available.
Using sdhci-caps-mask allows to mask bit 63. The stack then selects
HS200 as operating mode.

This prevents rare communication errors with minimal effect on
performance:
	sdhci-esdhc-imx 30b60000.usdhc: warning! HS400 strobe DLL
		status REF not lock!

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx7-colibri.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 895fbde4d4333..c1ed83131b495 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -323,6 +323,7 @@
 	vmmc-supply = <&reg_module_3v3>;
 	vqmmc-supply = <&reg_DCDC3>;
 	non-removable;
+	sdhci-caps-mask = <0x80000000 0x0>;
 };
 
 &iomuxc {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 083/185] x86/platform/intel/iosf_mbi Rewrite locking
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (80 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 082/185] ARM: dts: imx7-colibri: disable HS400 Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 084/185] media: radio/si470x: kill urb on error Sasha Levin
                   ` (101 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Thomas Gleixner, Andy Shevchenko, Sasha Levin

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 00452ba9fdb5bf6fb5fea1dae5227b4bbed44fc4 ]

There are 2 problems with the old iosf PMIC I2C bus arbritration code which
need to be addressed:

1. The lockdep code complains about a possible deadlock in the
iosf_mbi_[un]block_punit_i2c_access code:

[    6.712662] ======================================================
[    6.712673] WARNING: possible circular locking dependency detected
[    6.712685] 5.3.0-rc2+ #79 Not tainted
[    6.712692] ------------------------------------------------------
[    6.712702] kworker/0:1/7 is trying to acquire lock:
[    6.712712] 00000000df1c5681 (iosf_mbi_block_punit_i2c_access_count_mutex){+.+.}, at: iosf_mbi_unblock_punit_i2c_access+0x13/0x90
[    6.712739]
               but task is already holding lock:
[    6.712749] 0000000067cb23e7 (iosf_mbi_punit_mutex){+.+.}, at: iosf_mbi_block_punit_i2c_access+0x97/0x186
[    6.712768]
               which lock already depends on the new lock.

[    6.712780]
               the existing dependency chain (in reverse order) is:
[    6.712792]
               -> #1 (iosf_mbi_punit_mutex){+.+.}:
[    6.712808]        __mutex_lock+0xa8/0x9a0
[    6.712818]        iosf_mbi_block_punit_i2c_access+0x97/0x186
[    6.712831]        i2c_dw_acquire_lock+0x20/0x30
[    6.712841]        i2c_dw_set_reg_access+0x15/0xb0
[    6.712851]        i2c_dw_probe+0x57/0x473
[    6.712861]        dw_i2c_plat_probe+0x33e/0x640
[    6.712874]        platform_drv_probe+0x38/0x80
[    6.712884]        really_probe+0xf3/0x380
[    6.712894]        driver_probe_device+0x59/0xd0
[    6.712905]        bus_for_each_drv+0x84/0xd0
[    6.712915]        __device_attach+0xe4/0x170
[    6.712925]        bus_probe_device+0x9f/0xb0
[    6.712935]        deferred_probe_work_func+0x79/0xd0
[    6.712946]        process_one_work+0x234/0x560
[    6.712957]        worker_thread+0x50/0x3b0
[    6.712967]        kthread+0x10a/0x140
[    6.712977]        ret_from_fork+0x3a/0x50
[    6.712986]
               -> #0 (iosf_mbi_block_punit_i2c_access_count_mutex){+.+.}:
[    6.713004]        __lock_acquire+0xe07/0x1930
[    6.713015]        lock_acquire+0x9d/0x1a0
[    6.713025]        __mutex_lock+0xa8/0x9a0
[    6.713035]        iosf_mbi_unblock_punit_i2c_access+0x13/0x90
[    6.713047]        i2c_dw_set_reg_access+0x4d/0xb0
[    6.713058]        i2c_dw_probe+0x57/0x473
[    6.713068]        dw_i2c_plat_probe+0x33e/0x640
[    6.713079]        platform_drv_probe+0x38/0x80
[    6.713089]        really_probe+0xf3/0x380
[    6.713099]        driver_probe_device+0x59/0xd0
[    6.713109]        bus_for_each_drv+0x84/0xd0
[    6.713119]        __device_attach+0xe4/0x170
[    6.713129]        bus_probe_device+0x9f/0xb0
[    6.713140]        deferred_probe_work_func+0x79/0xd0
[    6.713150]        process_one_work+0x234/0x560
[    6.713160]        worker_thread+0x50/0x3b0
[    6.713170]        kthread+0x10a/0x140
[    6.713180]        ret_from_fork+0x3a/0x50
[    6.713189]
               other info that might help us debug this:

[    6.713202]  Possible unsafe locking scenario:

[    6.713212]        CPU0                    CPU1
[    6.713221]        ----                    ----
[    6.713229]   lock(iosf_mbi_punit_mutex);
[    6.713239]                                lock(iosf_mbi_block_punit_i2c_access_count_mutex);
[    6.713253]                                lock(iosf_mbi_punit_mutex);
[    6.713265]   lock(iosf_mbi_block_punit_i2c_access_count_mutex);
[    6.713276]
                *** DEADLOCK ***

In practice can never happen because only the first caller which
increments iosf_mbi_block_punit_i2c_access_count will also take
iosf_mbi_punit_mutex, that is the whole purpose of the counter, which
itself is protected by iosf_mbi_block_punit_i2c_access_count_mutex.

But there is no way to tell the lockdep code about this and we really
want to be able to run a kernel with lockdep enabled without these
warnings being triggered.

2. The lockdep warning also points out another real problem, if 2 threads
both are in a block of code protected by iosf_mbi_block_punit_i2c_access
and the first thread to acquire the block exits before the second thread
then the second thread will call mutex_unlock on iosf_mbi_punit_mutex,
but it is not the thread which took the mutex and unlocking by another
thread is not allowed.

Fix this by getting rid of the notion of holding a mutex for the entire
duration of the PMIC accesses, be it either from the PUnit side, or from an
in kernel I2C driver. In general holding a mutex after exiting a function
is a bad idea and the above problems show this case is no different.

Instead 2 counters are now used, one for PMIC accesses from the PUnit
and one for accesses from in kernel I2C code. When access is requested
now the code will wait (using a waitqueue) for the counter of the other
type of access to reach 0 and on release, if the counter reaches 0 the
wakequeue is woken.

Note that the counter approach is necessary to allow nested calls.
The main reason for this is so that a series of i2c transfers can be done
with the punit blocked from accessing the bus the whole time. This is
necessary to be able to safely read/modify/write a PMIC register without
racing with the PUNIT doing the same thing.

Allowing nested iosf_mbi_block_punit_i2c_access() calls also is desirable
from a performance pov since the whole dance necessary to block the PUnit
from accessing the PMIC I2C bus is somewhat expensive.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lkml.kernel.org/r/20190812102113.95794-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/platform/intel/iosf_mbi.c | 100 ++++++++++++++++++-----------
 1 file changed, 62 insertions(+), 38 deletions(-)

diff --git a/arch/x86/platform/intel/iosf_mbi.c b/arch/x86/platform/intel/iosf_mbi.c
index b393eaa798efd..0099826c88a87 100644
--- a/arch/x86/platform/intel/iosf_mbi.c
+++ b/arch/x86/platform/intel/iosf_mbi.c
@@ -17,6 +17,7 @@
 #include <linux/debugfs.h>
 #include <linux/capability.h>
 #include <linux/pm_qos.h>
+#include <linux/wait.h>
 
 #include <asm/iosf_mbi.h>
 
@@ -201,23 +202,45 @@ EXPORT_SYMBOL(iosf_mbi_available);
 #define PUNIT_SEMAPHORE_BIT		BIT(0)
 #define PUNIT_SEMAPHORE_ACQUIRE		BIT(1)
 
-static DEFINE_MUTEX(iosf_mbi_punit_mutex);
-static DEFINE_MUTEX(iosf_mbi_block_punit_i2c_access_count_mutex);
+static DEFINE_MUTEX(iosf_mbi_pmic_access_mutex);
 static BLOCKING_NOTIFIER_HEAD(iosf_mbi_pmic_bus_access_notifier);
-static u32 iosf_mbi_block_punit_i2c_access_count;
+static DECLARE_WAIT_QUEUE_HEAD(iosf_mbi_pmic_access_waitq);
+static u32 iosf_mbi_pmic_punit_access_count;
+static u32 iosf_mbi_pmic_i2c_access_count;
 static u32 iosf_mbi_sem_address;
 static unsigned long iosf_mbi_sem_acquired;
 static struct pm_qos_request iosf_mbi_pm_qos;
 
 void iosf_mbi_punit_acquire(void)
 {
-	mutex_lock(&iosf_mbi_punit_mutex);
+	/* Wait for any I2C PMIC accesses from in kernel drivers to finish. */
+	mutex_lock(&iosf_mbi_pmic_access_mutex);
+	while (iosf_mbi_pmic_i2c_access_count != 0) {
+		mutex_unlock(&iosf_mbi_pmic_access_mutex);
+		wait_event(iosf_mbi_pmic_access_waitq,
+			   iosf_mbi_pmic_i2c_access_count == 0);
+		mutex_lock(&iosf_mbi_pmic_access_mutex);
+	}
+	/*
+	 * We do not need to do anything to allow the PUNIT to safely access
+	 * the PMIC, other then block in kernel accesses to the PMIC.
+	 */
+	iosf_mbi_pmic_punit_access_count++;
+	mutex_unlock(&iosf_mbi_pmic_access_mutex);
 }
 EXPORT_SYMBOL(iosf_mbi_punit_acquire);
 
 void iosf_mbi_punit_release(void)
 {
-	mutex_unlock(&iosf_mbi_punit_mutex);
+	bool do_wakeup;
+
+	mutex_lock(&iosf_mbi_pmic_access_mutex);
+	iosf_mbi_pmic_punit_access_count--;
+	do_wakeup = iosf_mbi_pmic_punit_access_count == 0;
+	mutex_unlock(&iosf_mbi_pmic_access_mutex);
+
+	if (do_wakeup)
+		wake_up(&iosf_mbi_pmic_access_waitq);
 }
 EXPORT_SYMBOL(iosf_mbi_punit_release);
 
@@ -256,34 +279,32 @@ static void iosf_mbi_reset_semaphore(void)
  * already blocked P-Unit accesses because it wants them blocked over multiple
  * i2c-transfers, for e.g. read-modify-write of an I2C client register.
  *
- * The P-Unit accesses already being blocked is tracked through the
- * iosf_mbi_block_punit_i2c_access_count variable which is protected by the
- * iosf_mbi_block_punit_i2c_access_count_mutex this mutex is hold for the
- * entire duration of the function.
- *
- * If access is not blocked yet, this function takes the following steps:
+ * To allow safe PMIC i2c bus accesses this function takes the following steps:
  *
  * 1) Some code sends request to the P-Unit which make it access the PMIC
  *    I2C bus. Testing has shown that the P-Unit does not check its internal
  *    PMIC bus semaphore for these requests. Callers of these requests call
  *    iosf_mbi_punit_acquire()/_release() around their P-Unit accesses, these
- *    functions lock/unlock the iosf_mbi_punit_mutex.
- *    As the first step we lock the iosf_mbi_punit_mutex, to wait for any in
- *    flight requests to finish and to block any new requests.
+ *    functions increase/decrease iosf_mbi_pmic_punit_access_count, so first
+ *    we wait for iosf_mbi_pmic_punit_access_count to become 0.
+ *
+ * 2) Check iosf_mbi_pmic_i2c_access_count, if access has already
+ *    been blocked by another caller, we only need to increment
+ *    iosf_mbi_pmic_i2c_access_count and we can skip the other steps.
  *
- * 2) Some code makes such P-Unit requests from atomic contexts where it
+ * 3) Some code makes such P-Unit requests from atomic contexts where it
  *    cannot call iosf_mbi_punit_acquire() as that may sleep.
  *    As the second step we call a notifier chain which allows any code
  *    needing P-Unit resources from atomic context to acquire them before
  *    we take control over the PMIC I2C bus.
  *
- * 3) When CPU cores enter C6 or C7 the P-Unit needs to talk to the PMIC
+ * 4) When CPU cores enter C6 or C7 the P-Unit needs to talk to the PMIC
  *    if this happens while the kernel itself is accessing the PMIC I2C bus
  *    the SoC hangs.
  *    As the third step we call pm_qos_update_request() to disallow the CPU
  *    to enter C6 or C7.
  *
- * 4) The P-Unit has a PMIC bus semaphore which we can request to stop
+ * 5) The P-Unit has a PMIC bus semaphore which we can request to stop
  *    autonomous P-Unit tasks from accessing the PMIC I2C bus while we hold it.
  *    As the fourth and final step we request this semaphore and wait for our
  *    request to be acknowledged.
@@ -297,12 +318,18 @@ int iosf_mbi_block_punit_i2c_access(void)
 	if (WARN_ON(!mbi_pdev || !iosf_mbi_sem_address))
 		return -ENXIO;
 
-	mutex_lock(&iosf_mbi_block_punit_i2c_access_count_mutex);
+	mutex_lock(&iosf_mbi_pmic_access_mutex);
 
-	if (iosf_mbi_block_punit_i2c_access_count > 0)
+	while (iosf_mbi_pmic_punit_access_count != 0) {
+		mutex_unlock(&iosf_mbi_pmic_access_mutex);
+		wait_event(iosf_mbi_pmic_access_waitq,
+			   iosf_mbi_pmic_punit_access_count == 0);
+		mutex_lock(&iosf_mbi_pmic_access_mutex);
+	}
+
+	if (iosf_mbi_pmic_i2c_access_count > 0)
 		goto success;
 
-	mutex_lock(&iosf_mbi_punit_mutex);
 	blocking_notifier_call_chain(&iosf_mbi_pmic_bus_access_notifier,
 				     MBI_PMIC_BUS_ACCESS_BEGIN, NULL);
 
@@ -330,10 +357,6 @@ int iosf_mbi_block_punit_i2c_access(void)
 			iosf_mbi_sem_acquired = jiffies;
 			dev_dbg(&mbi_pdev->dev, "P-Unit semaphore acquired after %ums\n",
 				jiffies_to_msecs(jiffies - start));
-			/*
-			 * Success, keep iosf_mbi_punit_mutex locked till
-			 * iosf_mbi_unblock_punit_i2c_access() gets called.
-			 */
 			goto success;
 		}
 
@@ -344,15 +367,13 @@ int iosf_mbi_block_punit_i2c_access(void)
 	dev_err(&mbi_pdev->dev, "Error P-Unit semaphore timed out, resetting\n");
 error:
 	iosf_mbi_reset_semaphore();
-	mutex_unlock(&iosf_mbi_punit_mutex);
-
 	if (!iosf_mbi_get_sem(&sem))
 		dev_err(&mbi_pdev->dev, "P-Unit semaphore: %d\n", sem);
 success:
 	if (!WARN_ON(ret))
-		iosf_mbi_block_punit_i2c_access_count++;
+		iosf_mbi_pmic_i2c_access_count++;
 
-	mutex_unlock(&iosf_mbi_block_punit_i2c_access_count_mutex);
+	mutex_unlock(&iosf_mbi_pmic_access_mutex);
 
 	return ret;
 }
@@ -360,17 +381,20 @@ EXPORT_SYMBOL(iosf_mbi_block_punit_i2c_access);
 
 void iosf_mbi_unblock_punit_i2c_access(void)
 {
-	mutex_lock(&iosf_mbi_block_punit_i2c_access_count_mutex);
+	bool do_wakeup = false;
 
-	iosf_mbi_block_punit_i2c_access_count--;
-	if (iosf_mbi_block_punit_i2c_access_count == 0) {
+	mutex_lock(&iosf_mbi_pmic_access_mutex);
+	iosf_mbi_pmic_i2c_access_count--;
+	if (iosf_mbi_pmic_i2c_access_count == 0) {
 		iosf_mbi_reset_semaphore();
-		mutex_unlock(&iosf_mbi_punit_mutex);
 		dev_dbg(&mbi_pdev->dev, "punit semaphore held for %ums\n",
 			jiffies_to_msecs(jiffies - iosf_mbi_sem_acquired));
+		do_wakeup = true;
 	}
+	mutex_unlock(&iosf_mbi_pmic_access_mutex);
 
-	mutex_unlock(&iosf_mbi_block_punit_i2c_access_count_mutex);
+	if (do_wakeup)
+		wake_up(&iosf_mbi_pmic_access_waitq);
 }
 EXPORT_SYMBOL(iosf_mbi_unblock_punit_i2c_access);
 
@@ -379,10 +403,10 @@ int iosf_mbi_register_pmic_bus_access_notifier(struct notifier_block *nb)
 	int ret;
 
 	/* Wait for the bus to go inactive before registering */
-	mutex_lock(&iosf_mbi_punit_mutex);
+	iosf_mbi_punit_acquire();
 	ret = blocking_notifier_chain_register(
 				&iosf_mbi_pmic_bus_access_notifier, nb);
-	mutex_unlock(&iosf_mbi_punit_mutex);
+	iosf_mbi_punit_release();
 
 	return ret;
 }
@@ -403,9 +427,9 @@ int iosf_mbi_unregister_pmic_bus_access_notifier(struct notifier_block *nb)
 	int ret;
 
 	/* Wait for the bus to go inactive before unregistering */
-	mutex_lock(&iosf_mbi_punit_mutex);
+	iosf_mbi_punit_acquire();
 	ret = iosf_mbi_unregister_pmic_bus_access_notifier_unlocked(nb);
-	mutex_unlock(&iosf_mbi_punit_mutex);
+	iosf_mbi_punit_release();
 
 	return ret;
 }
@@ -413,7 +437,7 @@ EXPORT_SYMBOL(iosf_mbi_unregister_pmic_bus_access_notifier);
 
 void iosf_mbi_assert_punit_acquired(void)
 {
-	WARN_ON(!mutex_is_locked(&iosf_mbi_punit_mutex));
+	WARN_ON(iosf_mbi_pmic_punit_access_count == 0);
 }
 EXPORT_SYMBOL(iosf_mbi_assert_punit_acquired);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 084/185] media: radio/si470x: kill urb on error
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (81 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 083/185] x86/platform/intel/iosf_mbi Rewrite locking Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 085/185] media: hdpvr: add terminating 0 at end of string Sasha Levin
                   ` (100 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans Verkuil, syzbot+2d4fc2a0c45ad8da7e99, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 0d616f2a3fdbf1304db44d451d9f07008556923b ]

In the probe() function radio->int_in_urb was not killed if an
error occurred in the probe sequence. It was also missing in
the disconnect.

This caused this syzbot issue:

https://syzkaller.appspot.com/bug?extid=2d4fc2a0c45ad8da7e99

Reported-and-tested-by: syzbot+2d4fc2a0c45ad8da7e99@syzkaller.appspotmail.com

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/radio/si470x/radio-si470x-usb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index 58e622d573733..3dccce398113a 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -734,7 +734,7 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
 	/* start radio */
 	retval = si470x_start_usb(radio);
 	if (retval < 0)
-		goto err_all;
+		goto err_buf;
 
 	/* set initial frequency */
 	si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
@@ -749,6 +749,8 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
 
 	return 0;
 err_all:
+	usb_kill_urb(radio->int_in_urb);
+err_buf:
 	kfree(radio->buffer);
 err_ctrl:
 	v4l2_ctrl_handler_free(&radio->hdl);
@@ -822,6 +824,7 @@ static void si470x_usb_driver_disconnect(struct usb_interface *intf)
 	mutex_lock(&radio->lock);
 	v4l2_device_disconnect(&radio->v4l2_dev);
 	video_unregister_device(&radio->videodev);
+	usb_kill_urb(radio->int_in_urb);
 	usb_set_intfdata(intf, NULL);
 	mutex_unlock(&radio->lock);
 	v4l2_device_put(&radio->v4l2_dev);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 085/185] media: hdpvr: add terminating 0 at end of string
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (82 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 084/185] media: radio/si470x: kill urb on error Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 086/185] ASoC: uniphier: Fix double reset assersion when transitioning to suspend state Sasha Levin
                   ` (99 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans Verkuil, syzbot+79d18aac4bf1770dd050, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 8b8900b729e4f31f12ac1127bde137c775c327e6 ]

dev->usbc_buf was passed as argument for %s, but it was not safeguarded
by a terminating 0.

This caused this syzbot issue:

https://syzkaller.appspot.com/bug?extid=79d18aac4bf1770dd050

Reported-and-tested-by: syzbot+79d18aac4bf1770dd050@syzkaller.appspotmail.com

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/hdpvr/hdpvr-core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/usb/hdpvr/hdpvr-core.c b/drivers/media/usb/hdpvr/hdpvr-core.c
index a0905c81d2cb2..b75c18a012a73 100644
--- a/drivers/media/usb/hdpvr/hdpvr-core.c
+++ b/drivers/media/usb/hdpvr/hdpvr-core.c
@@ -137,6 +137,7 @@ static int device_authorization(struct hdpvr_device *dev)
 
 	dev->fw_ver = dev->usbc_buf[1];
 
+	dev->usbc_buf[46] = '\0';
 	v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n",
 			  dev->fw_ver, &dev->usbc_buf[2]);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 086/185] ASoC: uniphier: Fix double reset assersion when transitioning to suspend state
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (83 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 085/185] media: hdpvr: add terminating 0 at end of string Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47   ` Sasha Levin
                   ` (98 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Kunihiko Hayashi, Mark Brown, Sasha Levin

From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

[ Upstream commit c372a35550c8d60f673b20210eea58a06d6d38cb ]

When transitioning to supend state, uniphier_aio_dai_suspend() is called
and asserts reset lines and disables clocks.

However, if there are two or more DAIs, uniphier_aio_dai_suspend() are
called multiple times, and double reset assersion will cause.

This patch defines the counter that has the number of DAIs at first, and
whenever uniphier_aio_dai_suspend() are called, it decrements the
counter. And only if the counter is zero, it asserts reset lines and
disables clocks.

In the same way, uniphier_aio_dai_resume() are called, it increments the
counter after deasserting reset lines and enabling clocks.

Fixes: 139a34200233 ("ASoC: uniphier: add support for UniPhier AIO CPU DAI driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1566281764-14059-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/uniphier/aio-cpu.c | 31 +++++++++++++++++++++----------
 sound/soc/uniphier/aio.h     |  1 +
 2 files changed, 22 insertions(+), 10 deletions(-)

diff --git a/sound/soc/uniphier/aio-cpu.c b/sound/soc/uniphier/aio-cpu.c
index ee90e6c3937ce..2ae582a99b636 100644
--- a/sound/soc/uniphier/aio-cpu.c
+++ b/sound/soc/uniphier/aio-cpu.c
@@ -424,8 +424,11 @@ int uniphier_aio_dai_suspend(struct snd_soc_dai *dai)
 {
 	struct uniphier_aio *aio = uniphier_priv(dai);
 
-	reset_control_assert(aio->chip->rst);
-	clk_disable_unprepare(aio->chip->clk);
+	aio->chip->num_wup_aios--;
+	if (!aio->chip->num_wup_aios) {
+		reset_control_assert(aio->chip->rst);
+		clk_disable_unprepare(aio->chip->clk);
+	}
 
 	return 0;
 }
@@ -439,13 +442,15 @@ int uniphier_aio_dai_resume(struct snd_soc_dai *dai)
 	if (!aio->chip->active)
 		return 0;
 
-	ret = clk_prepare_enable(aio->chip->clk);
-	if (ret)
-		return ret;
+	if (!aio->chip->num_wup_aios) {
+		ret = clk_prepare_enable(aio->chip->clk);
+		if (ret)
+			return ret;
 
-	ret = reset_control_deassert(aio->chip->rst);
-	if (ret)
-		goto err_out_clock;
+		ret = reset_control_deassert(aio->chip->rst);
+		if (ret)
+			goto err_out_clock;
+	}
 
 	aio_iecout_set_enable(aio->chip, true);
 	aio_chip_init(aio->chip);
@@ -458,7 +463,7 @@ int uniphier_aio_dai_resume(struct snd_soc_dai *dai)
 
 		ret = aio_init(sub);
 		if (ret)
-			goto err_out_clock;
+			goto err_out_reset;
 
 		if (!sub->setting)
 			continue;
@@ -466,11 +471,16 @@ int uniphier_aio_dai_resume(struct snd_soc_dai *dai)
 		aio_port_reset(sub);
 		aio_src_reset(sub);
 	}
+	aio->chip->num_wup_aios++;
 
 	return 0;
 
+err_out_reset:
+	if (!aio->chip->num_wup_aios)
+		reset_control_assert(aio->chip->rst);
 err_out_clock:
-	clk_disable_unprepare(aio->chip->clk);
+	if (!aio->chip->num_wup_aios)
+		clk_disable_unprepare(aio->chip->clk);
 
 	return ret;
 }
@@ -619,6 +629,7 @@ int uniphier_aio_probe(struct platform_device *pdev)
 		return PTR_ERR(chip->rst);
 
 	chip->num_aios = chip->chip_spec->num_dais;
+	chip->num_wup_aios = chip->num_aios;
 	chip->aios = devm_kcalloc(dev,
 				  chip->num_aios, sizeof(struct uniphier_aio),
 				  GFP_KERNEL);
diff --git a/sound/soc/uniphier/aio.h b/sound/soc/uniphier/aio.h
index ca6ccbae0ee8c..a7ff7e556429b 100644
--- a/sound/soc/uniphier/aio.h
+++ b/sound/soc/uniphier/aio.h
@@ -285,6 +285,7 @@ struct uniphier_aio_chip {
 
 	struct uniphier_aio *aios;
 	int num_aios;
+	int num_wup_aios;
 	struct uniphier_aio_pll *plls;
 	int num_plls;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 087/185] powerpc/Makefile: Always pass --synthetic to nm if supported
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:47   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Michael Ellerman, Peter Collingbourne, Will Deacon, Sasha Levin,
	linuxppc-dev

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 117acf5c29dd89e4c86761c365b9724dba0d9763 ]

Back in 2004 we added logic to arch/ppc64/Makefile to pass
the --synthetic option to nm, if it was supported by nm.

Then in 2005 when arch/ppc64 and arch/ppc were merged, the logic to
add --synthetic was moved inside an #ifdef CONFIG_PPC64 block within
arch/powerpc/Makefile, and has remained there since.

That was fine, though crufty, until recently when a change to
init/Kconfig added a config time check that uses $(NM). On powerpc
that leads to an infinite loop because Kconfig uses $(NM) to calculate
some values, then the powerpc Makefile changes $(NM), which Kconfig
notices and restarts.

The original commit that added --synthetic simply said:
  On new toolchains we need to use nm --synthetic or we miss code
  symbols.

And the nm man page says that the --synthetic option causes nm to:
  Include synthetic symbols in the output. These are special symbols
  created by the linker for various purposes.

So it seems safe to always pass --synthetic if nm supports it, ie. on
32-bit and 64-bit, it just means 32-bit kernels might have more
symbols reported (and in practice I see no extra symbols). Making it
unconditional avoids the #ifdef CONFIG_PPC64, which in turn avoids the
infinite loop.

Debugged-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/Makefile | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index c345b79414a96..403f7e193833a 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -39,13 +39,11 @@ endif
 uname := $(shell uname -m)
 KBUILD_DEFCONFIG := $(if $(filter ppc%,$(uname)),$(uname),ppc64)_defconfig
 
-ifdef CONFIG_PPC64
 new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
 
 ifeq ($(new_nm),y)
 NM		:= $(NM) --synthetic
 endif
-endif
 
 # BITS is used as extension for files which are available in a 32 bit
 # and a 64 bit version to simplify shared Makefiles.
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 087/185] powerpc/Makefile: Always pass --synthetic to nm if supported
@ 2019-09-22 18:47   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Peter Collingbourne, linuxppc-dev, Will Deacon

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 117acf5c29dd89e4c86761c365b9724dba0d9763 ]

Back in 2004 we added logic to arch/ppc64/Makefile to pass
the --synthetic option to nm, if it was supported by nm.

Then in 2005 when arch/ppc64 and arch/ppc were merged, the logic to
add --synthetic was moved inside an #ifdef CONFIG_PPC64 block within
arch/powerpc/Makefile, and has remained there since.

That was fine, though crufty, until recently when a change to
init/Kconfig added a config time check that uses $(NM). On powerpc
that leads to an infinite loop because Kconfig uses $(NM) to calculate
some values, then the powerpc Makefile changes $(NM), which Kconfig
notices and restarts.

The original commit that added --synthetic simply said:
  On new toolchains we need to use nm --synthetic or we miss code
  symbols.

And the nm man page says that the --synthetic option causes nm to:
  Include synthetic symbols in the output. These are special symbols
  created by the linker for various purposes.

So it seems safe to always pass --synthetic if nm supports it, ie. on
32-bit and 64-bit, it just means 32-bit kernels might have more
symbols reported (and in practice I see no extra symbols). Making it
unconditional avoids the #ifdef CONFIG_PPC64, which in turn avoids the
infinite loop.

Debugged-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/Makefile | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index c345b79414a96..403f7e193833a 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -39,13 +39,11 @@ endif
 uname := $(shell uname -m)
 KBUILD_DEFCONFIG := $(if $(filter ppc%,$(uname)),$(uname),ppc64)_defconfig
 
-ifdef CONFIG_PPC64
 new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
 
 ifeq ($(new_nm),y)
 NM		:= $(NM) --synthetic
 endif
-endif
 
 # BITS is used as extension for files which are available in a 32 bit
 # and a 64 bit version to simplify shared Makefiles.
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 088/185] tools headers: Fixup bitsperlong per arch includes
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:47   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Arnaldo Carvalho de Melo, Adrian Hunter, Jiri Olsa, Namhyung Kim,
	Sasha Levin, linux-riscv

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 42fc2e9ef9603a7948aaa4ffd8dfb94b30294ad8 ]

We were getting the file by luck, from one of the paths in -I, fix it to
get it from the proper place:

  $ cd tools/include/uapi/asm/
  [acme@quaco asm]$ grep include bitsperlong.h
  #include "../../arch/x86/include/uapi/asm/bitsperlong.h"
  #include "../../arch/arm64/include/uapi/asm/bitsperlong.h"
  #include "../../arch/powerpc/include/uapi/asm/bitsperlong.h"
  #include "../../arch/s390/include/uapi/asm/bitsperlong.h"
  #include "../../arch/sparc/include/uapi/asm/bitsperlong.h"
  #include "../../arch/mips/include/uapi/asm/bitsperlong.h"
  #include "../../arch/ia64/include/uapi/asm/bitsperlong.h"
  #include "../../arch/riscv/include/uapi/asm/bitsperlong.h"
  #include "../../arch/alpha/include/uapi/asm/bitsperlong.h"
  #include <asm-generic/bitsperlong.h>
  $ ls -la ../../arch/x86/include/uapi/asm/bitsperlong.h
  ls: cannot access '../../arch/x86/include/uapi/asm/bitsperlong.h': No such file or directory
  $ ls -la ../../../arch/*/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 237 ../../../arch/alpha/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 841 ../../../arch/arm64/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 966 ../../../arch/hexagon/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 234 ../../../arch/ia64/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 100 ../../../arch/microblaze/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 244 ../../../arch/mips/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 352 ../../../arch/parisc/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 312 ../../../arch/powerpc/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 353 ../../../arch/riscv/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 292 ../../../arch/s390/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 323 ../../../arch/sparc/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 320 ../../../arch/x86/include/uapi/asm/bitsperlong.h
  $

Found while fixing some other problem, before it was escaping the
tools/ chroot and using stuff in the kernel sources:

    CC       /tmp/build/perf/util/find_bit.o
In file included from /git/linux/tools/include/../../arch/x86/include/uapi/asm/bitsperlong.h:11,
                 from /git/linux/tools/include/uapi/asm/bitsperlong.h:3,
                 from /git/linux/tools/include/linux/bits.h:6,
                 from /git/linux/tools/include/linux/bitops.h:13,
                 from ../lib/find_bit.c:17:

  # cd /git/linux/tools/include/../../arch/x86/include/uapi/asm/
  # pwd
  /git/linux/arch/x86/include/uapi/asm
  #

Now it is getting the one we want it to, i.e. the one inside tools/:

    CC       /tmp/build/perf/util/find_bit.o
  In file included from /git/linux/tools/arch/x86/include/uapi/asm/bitsperlong.h:11,
                   from /git/linux/tools/include/linux/bits.h:6,
                   from /git/linux/tools/include/linux/bitops.h:13,

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8f8cfqywmf6jk8a3ucr0ixhu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/include/uapi/asm/bitsperlong.h | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/tools/include/uapi/asm/bitsperlong.h b/tools/include/uapi/asm/bitsperlong.h
index 57aaeaf8e1920..edba4d93e9e6a 100644
--- a/tools/include/uapi/asm/bitsperlong.h
+++ b/tools/include/uapi/asm/bitsperlong.h
@@ -1,22 +1,22 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #if defined(__i386__) || defined(__x86_64__)
-#include "../../arch/x86/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/x86/include/uapi/asm/bitsperlong.h"
 #elif defined(__aarch64__)
-#include "../../arch/arm64/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/arm64/include/uapi/asm/bitsperlong.h"
 #elif defined(__powerpc__)
-#include "../../arch/powerpc/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/powerpc/include/uapi/asm/bitsperlong.h"
 #elif defined(__s390__)
-#include "../../arch/s390/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/s390/include/uapi/asm/bitsperlong.h"
 #elif defined(__sparc__)
-#include "../../arch/sparc/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/sparc/include/uapi/asm/bitsperlong.h"
 #elif defined(__mips__)
-#include "../../arch/mips/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/mips/include/uapi/asm/bitsperlong.h"
 #elif defined(__ia64__)
-#include "../../arch/ia64/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/ia64/include/uapi/asm/bitsperlong.h"
 #elif defined(__riscv)
-#include "../../arch/riscv/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/riscv/include/uapi/asm/bitsperlong.h"
 #elif defined(__alpha__)
-#include "../../arch/alpha/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/alpha/include/uapi/asm/bitsperlong.h"
 #else
 #include <asm-generic/bitsperlong.h>
 #endif
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 088/185] tools headers: Fixup bitsperlong per arch includes
@ 2019-09-22 18:47   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Adrian Hunter, Arnaldo Carvalho de Melo, Jiri Olsa,
	Namhyung Kim, linux-riscv

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 42fc2e9ef9603a7948aaa4ffd8dfb94b30294ad8 ]

We were getting the file by luck, from one of the paths in -I, fix it to
get it from the proper place:

  $ cd tools/include/uapi/asm/
  [acme@quaco asm]$ grep include bitsperlong.h
  #include "../../arch/x86/include/uapi/asm/bitsperlong.h"
  #include "../../arch/arm64/include/uapi/asm/bitsperlong.h"
  #include "../../arch/powerpc/include/uapi/asm/bitsperlong.h"
  #include "../../arch/s390/include/uapi/asm/bitsperlong.h"
  #include "../../arch/sparc/include/uapi/asm/bitsperlong.h"
  #include "../../arch/mips/include/uapi/asm/bitsperlong.h"
  #include "../../arch/ia64/include/uapi/asm/bitsperlong.h"
  #include "../../arch/riscv/include/uapi/asm/bitsperlong.h"
  #include "../../arch/alpha/include/uapi/asm/bitsperlong.h"
  #include <asm-generic/bitsperlong.h>
  $ ls -la ../../arch/x86/include/uapi/asm/bitsperlong.h
  ls: cannot access '../../arch/x86/include/uapi/asm/bitsperlong.h': No such file or directory
  $ ls -la ../../../arch/*/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 237 ../../../arch/alpha/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 841 ../../../arch/arm64/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 966 ../../../arch/hexagon/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 234 ../../../arch/ia64/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 100 ../../../arch/microblaze/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 244 ../../../arch/mips/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 352 ../../../arch/parisc/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 312 ../../../arch/powerpc/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 353 ../../../arch/riscv/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 292 ../../../arch/s390/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 323 ../../../arch/sparc/include/uapi/asm/bitsperlong.h
  -rw-rw-r--. 1 320 ../../../arch/x86/include/uapi/asm/bitsperlong.h
  $

Found while fixing some other problem, before it was escaping the
tools/ chroot and using stuff in the kernel sources:

    CC       /tmp/build/perf/util/find_bit.o
In file included from /git/linux/tools/include/../../arch/x86/include/uapi/asm/bitsperlong.h:11,
                 from /git/linux/tools/include/uapi/asm/bitsperlong.h:3,
                 from /git/linux/tools/include/linux/bits.h:6,
                 from /git/linux/tools/include/linux/bitops.h:13,
                 from ../lib/find_bit.c:17:

  # cd /git/linux/tools/include/../../arch/x86/include/uapi/asm/
  # pwd
  /git/linux/arch/x86/include/uapi/asm
  #

Now it is getting the one we want it to, i.e. the one inside tools/:

    CC       /tmp/build/perf/util/find_bit.o
  In file included from /git/linux/tools/arch/x86/include/uapi/asm/bitsperlong.h:11,
                   from /git/linux/tools/include/linux/bits.h:6,
                   from /git/linux/tools/include/linux/bitops.h:13,

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8f8cfqywmf6jk8a3ucr0ixhu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/include/uapi/asm/bitsperlong.h | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/tools/include/uapi/asm/bitsperlong.h b/tools/include/uapi/asm/bitsperlong.h
index 57aaeaf8e1920..edba4d93e9e6a 100644
--- a/tools/include/uapi/asm/bitsperlong.h
+++ b/tools/include/uapi/asm/bitsperlong.h
@@ -1,22 +1,22 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #if defined(__i386__) || defined(__x86_64__)
-#include "../../arch/x86/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/x86/include/uapi/asm/bitsperlong.h"
 #elif defined(__aarch64__)
-#include "../../arch/arm64/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/arm64/include/uapi/asm/bitsperlong.h"
 #elif defined(__powerpc__)
-#include "../../arch/powerpc/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/powerpc/include/uapi/asm/bitsperlong.h"
 #elif defined(__s390__)
-#include "../../arch/s390/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/s390/include/uapi/asm/bitsperlong.h"
 #elif defined(__sparc__)
-#include "../../arch/sparc/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/sparc/include/uapi/asm/bitsperlong.h"
 #elif defined(__mips__)
-#include "../../arch/mips/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/mips/include/uapi/asm/bitsperlong.h"
 #elif defined(__ia64__)
-#include "../../arch/ia64/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/ia64/include/uapi/asm/bitsperlong.h"
 #elif defined(__riscv)
-#include "../../arch/riscv/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/riscv/include/uapi/asm/bitsperlong.h"
 #elif defined(__alpha__)
-#include "../../arch/alpha/include/uapi/asm/bitsperlong.h"
+#include "../../../arch/alpha/include/uapi/asm/bitsperlong.h"
 #else
 #include <asm-generic/bitsperlong.h>
 #endif
-- 
2.20.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 089/185] ASoC: sun4i-i2s: Don't use the oversample to calculate BCLK
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (86 preceding siblings ...)
  2019-09-22 18:47   ` Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 090/185] ASoC: mchp-i2s-mcc: Wait for RX/TX RDY only if controller is running Sasha Levin
                   ` (95 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Maxime Ripard, Mark Brown, Sasha Levin

From: Maxime Ripard <maxime.ripard@bootlin.com>

[ Upstream commit 7df8f9a20196072162d9dc8fe99943f2d35f23d5 ]

The BCLK divider should be calculated using the parameters that actually
make the BCLK rate: the number of channels, the sampling rate and the
sample width.

We've been using the oversample_rate previously because in the former SoCs,
the BCLK's parent is MCLK, which in turn is being used to generate the
oversample rate, so we end up with something like this:

oversample = mclk_rate / sampling_rate
bclk_div = oversample / word_size / channels

So, bclk_div = mclk_rate / sampling_rate / word_size / channels.

And this is actually better, since the oversampling ratio only plays a role
because the MCLK is its parent, not because of what BCLK is supposed to be.

Furthermore, that assumption of MCLK being the parent has been broken on
newer SoCs, so let's use the proper formula, and have the parent rate as an
argument.

Fixes: 7d2993811a1e ("ASoC: sun4i-i2s: Add support for H3")
Fixes: 21faaea1343f ("ASoC: sun4i-i2s: Add support for A83T")
Fixes: 66ecce332538 ("ASoC: sun4i-i2s: Add compatibility with A64 codec I2S")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/c3595e3a9788c2ef2dcc30aa3c8c4953bb5cc249.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sunxi/sun4i-i2s.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index fd7c37596f21a..1d946a1927088 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -219,10 +219,11 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
 };
 
 static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
-				  unsigned int oversample_rate,
+				  unsigned long parent_rate,
+				  unsigned int sampling_rate,
 				  unsigned int word_size)
 {
-	int div = oversample_rate / word_size / 2;
+	int div = parent_rate / sampling_rate / word_size / 2;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sun4i_i2s_bclk_div); i++) {
@@ -312,8 +313,8 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
 		return -EINVAL;
 	}
 
-	bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
-					  word_size);
+	bclk_div = sun4i_i2s_get_bclk_div(i2s, i2s->mclk_freq,
+					  rate, word_size);
 	if (bclk_div < 0) {
 		dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div);
 		return -EINVAL;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 090/185] ASoC: mchp-i2s-mcc: Wait for RX/TX RDY only if controller is running
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (87 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 089/185] ASoC: sun4i-i2s: Don't use the oversample to calculate BCLK Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 091/185] led: triggers: Fix a memory leak bug Sasha Levin
                   ` (94 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Codrin Ciubotariu, Mark Brown, Sasha Levin

From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>

[ Upstream commit 0f6fc97501b790c971b11b52a654009d21c45238 ]

Since hw_free() can be called multiple times and not just after a stop
trigger command, we should check whether the RX or TX ready interrupt was
truly enabled previously. For this, we assure that the condition of the
wait event is always true, except when RX/TX interrupts are enabled.

Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20190820162411.24836-3-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/atmel/mchp-i2s-mcc.c | 28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c
index 86495883ca3f1..8272915fa09b9 100644
--- a/sound/soc/atmel/mchp-i2s-mcc.c
+++ b/sound/soc/atmel/mchp-i2s-mcc.c
@@ -686,22 +686,24 @@ static int mchp_i2s_mcc_hw_free(struct snd_pcm_substream *substream,
 		err = wait_event_interruptible_timeout(dev->wq_txrdy,
 						       dev->tx_rdy,
 						       msecs_to_jiffies(500));
+		if (err == 0) {
+			dev_warn_once(dev->dev,
+				      "Timeout waiting for Tx ready\n");
+			regmap_write(dev->regmap, MCHP_I2SMCC_IDRA,
+				     MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels));
+			dev->tx_rdy = 1;
+		}
 	} else {
 		err = wait_event_interruptible_timeout(dev->wq_rxrdy,
 						       dev->rx_rdy,
 						       msecs_to_jiffies(500));
-	}
-
-	if (err == 0) {
-		u32 idra;
-
-		dev_warn_once(dev->dev, "Timeout waiting for %s\n",
-			      is_playback ? "Tx ready" : "Rx ready");
-		if (is_playback)
-			idra = MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels);
-		else
-			idra = MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels);
-		regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, idra);
+		if (err == 0) {
+			dev_warn_once(dev->dev,
+				      "Timeout waiting for Rx ready\n");
+			regmap_write(dev->regmap, MCHP_I2SMCC_IDRA,
+				     MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels));
+			dev->rx_rdy = 1;
+		}
 	}
 
 	if (!mchp_i2s_mcc_is_running(dev)) {
@@ -809,6 +811,8 @@ static int mchp_i2s_mcc_dai_probe(struct snd_soc_dai *dai)
 
 	init_waitqueue_head(&dev->wq_txrdy);
 	init_waitqueue_head(&dev->wq_rxrdy);
+	dev->tx_rdy = 1;
+	dev->rx_rdy = 1;
 
 	snd_soc_dai_init_dma_data(dai, &dev->playback, &dev->capture);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 091/185] led: triggers: Fix a memory leak bug
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (88 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 090/185] ASoC: mchp-i2s-mcc: Wait for RX/TX RDY only if controller is running Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 092/185] ASoC: mchp-i2s-mcc: Fix unprepare of GCLK Sasha Levin
                   ` (93 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Wenwen Wang, Pavel Machek, Jacek Anaszewski, Sasha Levin, linux-leds

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit 60e2dde1e91ae0addb21ac380cc36ebee7534e49 ]

In led_trigger_set(), 'event' is allocated in kasprintf(). However, it is
not deallocated in the following execution if the label 'err_activate' or
'err_add_groups' is entered, leading to memory leaks. To fix this issue,
free 'event' before returning the error.

Fixes: 52c47742f79d ("leds: triggers: send uevent when changing triggers")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/led-triggers.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index 8d11a5e232271..eff1bda8b5200 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -173,6 +173,7 @@ int led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
 	list_del(&led_cdev->trig_list);
 	write_unlock_irqrestore(&led_cdev->trigger->leddev_list_lock, flags);
 	led_set_brightness(led_cdev, LED_OFF);
+	kfree(event);
 
 	return ret;
 }
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 092/185] ASoC: mchp-i2s-mcc: Fix unprepare of GCLK
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (89 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 091/185] led: triggers: Fix a memory leak bug Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 093/185] nbd: add missing config put Sasha Levin
                   ` (92 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Codrin Ciubotariu, Mark Brown, Sasha Levin

From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>

[ Upstream commit 988b59467b2b14523a266957affbe9eca3e99fc9 ]

If hw_free() gets called after hw_params(), GCLK remains prepared,
preventing further use of it. This patch fixes this by unpreparing the
clock in hw_free() or if hw_params() gets an error.

Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20190820162411.24836-2-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/atmel/mchp-i2s-mcc.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c
index 8272915fa09b9..ab7d5f98e759e 100644
--- a/sound/soc/atmel/mchp-i2s-mcc.c
+++ b/sound/soc/atmel/mchp-i2s-mcc.c
@@ -670,8 +670,13 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	ret = regmap_write(dev->regmap, MCHP_I2SMCC_MRA, mra);
-	if (ret < 0)
+	if (ret < 0) {
+		if (dev->gclk_use) {
+			clk_unprepare(dev->gclk);
+			dev->gclk_use = 0;
+		}
 		return ret;
+	}
 	return regmap_write(dev->regmap, MCHP_I2SMCC_MRB, mrb);
 }
 
@@ -710,9 +715,13 @@ static int mchp_i2s_mcc_hw_free(struct snd_pcm_substream *substream,
 		regmap_write(dev->regmap, MCHP_I2SMCC_CR, MCHP_I2SMCC_CR_CKDIS);
 
 		if (dev->gclk_running) {
-			clk_disable_unprepare(dev->gclk);
+			clk_disable(dev->gclk);
 			dev->gclk_running = 0;
 		}
+		if (dev->gclk_use) {
+			clk_unprepare(dev->gclk);
+			dev->gclk_use = 0;
+		}
 	}
 
 	return 0;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 093/185] nbd: add missing config put
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (90 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 092/185] ASoC: mchp-i2s-mcc: Fix unprepare of GCLK Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 094/185] ACPI / APEI: Release resources if gen_pool_add() fails Sasha Levin
                   ` (91 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Mike Christie, Josef Bacik, Jens Axboe, Sasha Levin, linux-block, nbd

From: Mike Christie <mchristi@redhat.com>

[ Upstream commit 887e975c4172d0d5670c39ead2f18ba1e4ec8133 ]

Fix bug added with the patch:

commit 8f3ea35929a0806ad1397db99a89ffee0140822a
Author: Josef Bacik <josef@toxicpanda.com>
Date:   Mon Jul 16 12:11:35 2018 -0400

    nbd: handle unexpected replies better

where if the timeout handler runs when the completion path is and we fail
to grab the mutex in the timeout handler we will leave a config reference
and cannot free the config later.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/nbd.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 57aebc6e1c288..5d5e52c6509ce 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -355,8 +355,10 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req,
 	}
 	config = nbd->config;
 
-	if (!mutex_trylock(&cmd->lock))
+	if (!mutex_trylock(&cmd->lock)) {
+		nbd_config_put(nbd);
 		return BLK_EH_RESET_TIMER;
+	}
 
 	if (config->num_connections > 1) {
 		dev_err_ratelimited(nbd_to_dev(nbd),
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 094/185] ACPI / APEI: Release resources if gen_pool_add() fails
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (91 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 093/185] nbd: add missing config put Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 095/185] arm64: entry: Move ct_user_exit before any other exception Sasha Levin
                   ` (90 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Liguang Zhang, Borislav Petkov, Rafael J . Wysocki, Sasha Levin,
	linux-acpi

From: Liguang Zhang <zhangliguang@linux.alibaba.com>

[ Upstream commit 6abc7622271dc520f241462e2474c71723638851 ]

Destroy ghes_estatus_pool and release memory allocated via vmalloc() on
errors in ghes_estatus_pool_init() in order to avoid memory leaks.

 [ bp: do the labels properly and with descriptive names and massage. ]

Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1563173924-47479-1-git-send-email-zhangliguang@linux.alibaba.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/apei/ghes.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 993940d582f50..6875bf629f16e 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -153,6 +153,7 @@ static void ghes_unmap(void __iomem *vaddr, enum fixed_addresses fixmap_idx)
 int ghes_estatus_pool_init(int num_ghes)
 {
 	unsigned long addr, len;
+	int rc;
 
 	ghes_estatus_pool = gen_pool_create(GHES_ESTATUS_POOL_MIN_ALLOC_ORDER, -1);
 	if (!ghes_estatus_pool)
@@ -164,7 +165,7 @@ int ghes_estatus_pool_init(int num_ghes)
 	ghes_estatus_pool_size_request = PAGE_ALIGN(len);
 	addr = (unsigned long)vmalloc(PAGE_ALIGN(len));
 	if (!addr)
-		return -ENOMEM;
+		goto err_pool_alloc;
 
 	/*
 	 * New allocation must be visible in all pgd before it can be found by
@@ -172,7 +173,19 @@ int ghes_estatus_pool_init(int num_ghes)
 	 */
 	vmalloc_sync_all();
 
-	return gen_pool_add(ghes_estatus_pool, addr, PAGE_ALIGN(len), -1);
+	rc = gen_pool_add(ghes_estatus_pool, addr, PAGE_ALIGN(len), -1);
+	if (rc)
+		goto err_pool_add;
+
+	return 0;
+
+err_pool_add:
+	vfree((void *)addr);
+
+err_pool_alloc:
+	gen_pool_destroy(ghes_estatus_pool);
+
+	return -ENOMEM;
 }
 
 static int map_gen_v2(struct ghes *ghes)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 095/185] arm64: entry: Move ct_user_exit before any other exception
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (92 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 094/185] ACPI / APEI: Release resources if gen_pool_add() fails Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 096/185] s390/kasan: provide uninstrumented __strlen Sasha Levin
                   ` (89 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: James Morse, Masami Hiramatsu, Will Deacon, Sasha Levin

From: James Morse <james.morse@arm.com>

[ Upstream commit 2671828c3ff4ffadf777f793a1f3232d6e51394a ]

When taking an SError or Debug exception from EL0, we run the C
handler for these exceptions before updating the context tracking
code and unmasking lower priority interrupts.

When booting with nohz_full lockdep tells us we got this wrong:
| =============================
| WARNING: suspicious RCU usage
| 5.3.0-rc2-00010-gb4b5e9dcb11b-dirty #11271 Not tainted
| -----------------------------
| include/linux/rcupdate.h:643 rcu_read_unlock() used illegally wh!
|
| other info that might help us debug this:
|
|
| RCU used illegally from idle CPU!
| rcu_scheduler_active = 2, debug_locks = 1
| RCU used illegally from extended quiescent state!
| 1 lock held by a.out/432:
|  #0: 00000000c7a79515 (rcu_read_lock){....}, at: brk_handler+0x00
|
| stack backtrace:
| CPU: 1 PID: 432 Comm: a.out Not tainted 5.3.0-rc2-00010-gb4b5e9d1
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno De8
| Call trace:
|  dump_backtrace+0x0/0x140
|  show_stack+0x14/0x20
|  dump_stack+0xbc/0x104
|  lockdep_rcu_suspicious+0xf8/0x108
|  brk_handler+0x164/0x1b0
|  do_debug_exception+0x11c/0x278
|  el0_dbg+0x14/0x20

Moving the ct_user_exit calls to be before do_debug_exception() means
they are also before trace_hardirqs_off() has been updated. Add a new
ct_user_exit_irqoff macro to avoid the context-tracking code using
irqsave/restore before we've updated trace_hardirqs_off(). To be
consistent, do this everywhere.

The C helper is called enter_from_user_mode() to match x86 in the hope
we can merge them into kernel/context_tracking.c later.

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 6c81fe7925cc4c42 ("arm64: enable context tracking")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/exception.h |  2 ++
 arch/arm64/kernel/entry.S          | 36 ++++++++++++++++--------------
 arch/arm64/kernel/traps.c          |  9 ++++++++
 3 files changed, 30 insertions(+), 17 deletions(-)

diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h
index ed57b760f38cf..a17393ff66774 100644
--- a/arch/arm64/include/asm/exception.h
+++ b/arch/arm64/include/asm/exception.h
@@ -30,4 +30,6 @@ static inline u32 disr_to_esr(u64 disr)
 	return esr;
 }
 
+asmlinkage void enter_from_user_mode(void);
+
 #endif	/* __ASM_EXCEPTION_H */
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 320a30dbe35ef..84a822748c84e 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -30,9 +30,9 @@
  * Context tracking subsystem.  Used to instrument transitions
  * between user and kernel mode.
  */
-	.macro ct_user_exit
+	.macro ct_user_exit_irqoff
 #ifdef CONFIG_CONTEXT_TRACKING
-	bl	context_tracking_user_exit
+	bl	enter_from_user_mode
 #endif
 	.endm
 
@@ -792,8 +792,8 @@ el0_cp15:
 	/*
 	 * Trapped CP15 (MRC, MCR, MRRC, MCRR) instructions
 	 */
+	ct_user_exit_irqoff
 	enable_daif
-	ct_user_exit
 	mov	x0, x25
 	mov	x1, sp
 	bl	do_cp15instr
@@ -805,8 +805,8 @@ el0_da:
 	 * Data abort handling
 	 */
 	mrs	x26, far_el1
+	ct_user_exit_irqoff
 	enable_daif
-	ct_user_exit
 	clear_address_tag x0, x26
 	mov	x1, x25
 	mov	x2, sp
@@ -818,11 +818,11 @@ el0_ia:
 	 */
 	mrs	x26, far_el1
 	gic_prio_kentry_setup tmp=x0
+	ct_user_exit_irqoff
 	enable_da_f
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
 #endif
-	ct_user_exit
 	mov	x0, x26
 	mov	x1, x25
 	mov	x2, sp
@@ -832,8 +832,8 @@ el0_fpsimd_acc:
 	/*
 	 * Floating Point or Advanced SIMD access
 	 */
+	ct_user_exit_irqoff
 	enable_daif
-	ct_user_exit
 	mov	x0, x25
 	mov	x1, sp
 	bl	do_fpsimd_acc
@@ -842,8 +842,8 @@ el0_sve_acc:
 	/*
 	 * Scalable Vector Extension access
 	 */
+	ct_user_exit_irqoff
 	enable_daif
-	ct_user_exit
 	mov	x0, x25
 	mov	x1, sp
 	bl	do_sve_acc
@@ -852,8 +852,8 @@ el0_fpsimd_exc:
 	/*
 	 * Floating Point, Advanced SIMD or SVE exception
 	 */
+	ct_user_exit_irqoff
 	enable_daif
-	ct_user_exit
 	mov	x0, x25
 	mov	x1, sp
 	bl	do_fpsimd_exc
@@ -868,11 +868,11 @@ el0_sp_pc:
 	 * Stack or PC alignment exception handling
 	 */
 	gic_prio_kentry_setup tmp=x0
+	ct_user_exit_irqoff
 	enable_da_f
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
 #endif
-	ct_user_exit
 	mov	x0, x26
 	mov	x1, x25
 	mov	x2, sp
@@ -882,8 +882,8 @@ el0_undef:
 	/*
 	 * Undefined instruction
 	 */
+	ct_user_exit_irqoff
 	enable_daif
-	ct_user_exit
 	mov	x0, sp
 	bl	do_undefinstr
 	b	ret_to_user
@@ -891,8 +891,8 @@ el0_sys:
 	/*
 	 * System instructions, for trapped cache maintenance instructions
 	 */
+	ct_user_exit_irqoff
 	enable_daif
-	ct_user_exit
 	mov	x0, x25
 	mov	x1, sp
 	bl	do_sysinstr
@@ -902,17 +902,18 @@ el0_dbg:
 	 * Debug exception handling
 	 */
 	tbnz	x24, #0, el0_inv		// EL0 only
+	mrs	x24, far_el1
 	gic_prio_kentry_setup tmp=x3
-	mrs	x0, far_el1
+	ct_user_exit_irqoff
+	mov	x0, x24
 	mov	x1, x25
 	mov	x2, sp
 	bl	do_debug_exception
 	enable_da_f
-	ct_user_exit
 	b	ret_to_user
 el0_inv:
+	ct_user_exit_irqoff
 	enable_daif
-	ct_user_exit
 	mov	x0, sp
 	mov	x1, #BAD_SYNC
 	mov	x2, x25
@@ -925,13 +926,13 @@ el0_irq:
 	kernel_entry 0
 el0_irq_naked:
 	gic_prio_irq_setup pmr=x20, tmp=x0
+	ct_user_exit_irqoff
 	enable_da_f
 
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
 #endif
 
-	ct_user_exit
 #ifdef CONFIG_HARDEN_BRANCH_PREDICTOR
 	tbz	x22, #55, 1f
 	bl	do_el0_irq_bp_hardening
@@ -958,13 +959,14 @@ ENDPROC(el1_error)
 el0_error:
 	kernel_entry 0
 el0_error_naked:
-	mrs	x1, esr_el1
+	mrs	x25, esr_el1
 	gic_prio_kentry_setup tmp=x2
+	ct_user_exit_irqoff
 	enable_dbg
 	mov	x0, sp
+	mov	x1, x25
 	bl	do_serror
 	enable_da_f
-	ct_user_exit
 	b	ret_to_user
 ENDPROC(el0_error)
 
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 985721a1264c9..b6706a8860371 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -7,9 +7,11 @@
  */
 
 #include <linux/bug.h>
+#include <linux/context_tracking.h>
 #include <linux/signal.h>
 #include <linux/personality.h>
 #include <linux/kallsyms.h>
+#include <linux/kprobes.h>
 #include <linux/spinlock.h>
 #include <linux/uaccess.h>
 #include <linux/hardirq.h>
@@ -905,6 +907,13 @@ asmlinkage void do_serror(struct pt_regs *regs, unsigned int esr)
 		nmi_exit();
 }
 
+asmlinkage void enter_from_user_mode(void)
+{
+	CT_WARN_ON(ct_state() != CONTEXT_USER);
+	user_exit_irqoff();
+}
+NOKPROBE_SYMBOL(enter_from_user_mode);
+
 void __pte_error(const char *file, int line, unsigned long val)
 {
 	pr_err("%s:%d: bad pte %016lx.\n", file, line, val);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 096/185] s390/kasan: provide uninstrumented __strlen
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (93 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 095/185] arm64: entry: Move ct_user_exit before any other exception Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 097/185] media: mceusb: fix (eliminate) TX IR signal length limit Sasha Levin
                   ` (88 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Vasily Gorbik, Ilya Leoshkevich, Sasha Levin, linux-s390

From: Vasily Gorbik <gor@linux.ibm.com>

[ Upstream commit f45f7b5bdaa4828ce871cf03f7c01599a0de57a5 ]

s390 kasan code uses sclp_early_printk to report initialization
failures. The code doing that should not be instrumented, because kasan
shadow memory has not been set up yet. Even though sclp_early_core.c is
compiled with instrumentation disabled it uses strlen function, which
is instrumented and would produce shadow memory access if used. To
avoid that, introduce uninstrumented __strlen function to be used
instead.

Before commit 7e0d92f00246 ("s390/kasan: improve string/memory functions
checks") few string functions (including strlen) were escaping kasan
instrumentation due to usage of platform specific versions which are
implemented in inline assembly.

Fixes: 7e0d92f00246 ("s390/kasan: improve string/memory functions checks")
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/string.h | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/s390/include/asm/string.h b/arch/s390/include/asm/string.h
index 70d87db54e627..4c0690fc5167e 100644
--- a/arch/s390/include/asm/string.h
+++ b/arch/s390/include/asm/string.h
@@ -71,11 +71,16 @@ extern void *__memmove(void *dest, const void *src, size_t n);
 #define memcpy(dst, src, len) __memcpy(dst, src, len)
 #define memmove(dst, src, len) __memmove(dst, src, len)
 #define memset(s, c, n) __memset(s, c, n)
+#define strlen(s) __strlen(s)
+
+#define __no_sanitize_prefix_strfunc(x) __##x
 
 #ifndef __NO_FORTIFY
 #define __NO_FORTIFY /* FORTIFY_SOURCE uses __builtin_memcpy, etc. */
 #endif
 
+#else
+#define __no_sanitize_prefix_strfunc(x) x
 #endif /* defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__) */
 
 void *__memset16(uint16_t *s, uint16_t v, size_t count);
@@ -163,8 +168,8 @@ static inline char *strcpy(char *dst, const char *src)
 }
 #endif
 
-#ifdef __HAVE_ARCH_STRLEN
-static inline size_t strlen(const char *s)
+#if defined(__HAVE_ARCH_STRLEN) || (defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__))
+static inline size_t __no_sanitize_prefix_strfunc(strlen)(const char *s)
 {
 	register unsigned long r0 asm("0") = 0;
 	const char *tmp = s;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 097/185] media: mceusb: fix (eliminate) TX IR signal length limit
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (94 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 096/185] s390/kasan: provide uninstrumented __strlen Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 098/185] media: dvb-frontends: use ida for pll number Sasha Levin
                   ` (87 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: A Sun, Sean Young, Mauro Carvalho Chehab, Sasha Levin, linux-media

From: A Sun <as1033x@comcast.net>

[ Upstream commit 9fc3ce31f5bde660197f35135e90a1cced58aa2c ]

Fix and eliminate mceusb's IR length limit for IR signals transmitted to
the MCE IR blaster ports.

An IR signal TX exceeding 306 pulse/space samples presently causes -EINVAL
return error. There's no such limitation nor error with the MCE device
hardware. And valid IR signals exist with more than 400 pulse/space for the
control of certain appliances (eg Panasonic ACXA75C00600 air conditioner).

The scope of this patch is limited to the mceusb driver. There are still
IR signal TX length and time constraints that related modules of rc core
(eg LIRC) impose, further up the driver stack.

Changes for mceusb_tx_ir():

Converts and sends LIRC IR pulse/space sequence to MCE device IR
pulse/space format.

Break long length LIRC sequence into multiple (unlimited number of) parts
for sending to the MCE device.
Reduce kernel stack IR buffer size: 128 (was 384)
Increase MCE IR data packet size: 31 (was 5)
Zero time LIRC pulse/space no longer copied to MCE IR data.
Eliminate overwriting the source/input LIRC IR data in txbuf[].
Eliminate -EINVAL return; return number of IR samples sent (>0) or
MCE write error code (<0).

New mce_write() and mce_write_callback():

Implements synchronous blocking I/O, with timeout, for writing/sending
data to the MCE device.

An unlimited multipart IR signal sent to the MCE device faster than real
time requires flow control absent with the original mce_request_packet()
and mce_async_callback() asynchronous I/O implementation. Also absent is
TX error feedback.

mce_write() combines and replaces mce_request_packet() and
mce_async_callback() with conversion to synchronous I/O.
mce_write() returns bytes sent (>0) or MCE device write error (<0).
Debug hex dump TX data before processing.

Rename mce_async_out() -> mce_command_out():

The original name is misleading with underlying synchronous I/O
implementation. Function renamed to mce_command_out().

Changes in mceusb_handle_command():

Add support for MCE device error case MCE_RSP_TX_TIMEOUT
"IR TX timeout (TX buffer underrun)"

Changes in mceusb_dev_printdata():

Changes support test and debug of multipart TX IR.

Add buffer boundary information (offset and buffer size) to TX hex dump.
Correct TX trace bug "Raw IR data, 0 pulse/space samples"
Add trace for MCE_RSP_TX_TIMEOUT "IR TX timeout (TX buffer underrun)"

Other changes:

The driver's write to USB device architecture change (async to sync I/O)
is significant so we bump DRIVER_VERSION to "1.95" (from "1.94").

Tests:

$ cat -n irdata1 | head -3
     1  carrier 36000
     2  pulse 6350
     3  space 6350
$ cat -n irdata1 | tail -3
    76  pulse 6350
    77  space 6350
    78  pulse 6350
$ ir-ctl -s irdata1

[1549021.073612] mceusb 1-1.3:1.0: requesting 36000 HZ carrier
[1549021.073635] mceusb 1-1.3:1.0: tx data[0]: 9f 06 01 45 (len=4 sz=4)
[1549021.073649] mceusb 1-1.3:1.0: Request carrier of 35714 Hz (period 28us)
[1549021.073848] mceusb 1-1.3:1.0: tx done status = 4 (wait = 100, expire = 100 (1000ms), urb->actual_length = 4, urb->status = 0)
[1549021.074689] mceusb 1-1.3:1.0: rx data[0]: 9f 06 01 45 (len=4 sz=4)
[1549021.074701] mceusb 1-1.3:1.0: Got carrier of 35714 Hz (period 28us)
[1549021.102023] mceusb 1-1.3:1.0: tx data[0]: 9f 08 03 (len=3 sz=3)
[1549021.102036] mceusb 1-1.3:1.0: Request transmit blaster mask of 0x03
[1549021.102219] mceusb 1-1.3:1.0: tx done status = 3 (wait = 100, expire = 100 (1000ms), urb->actual_length = 3, urb->status = 0)
[1549021.131979] mceusb 1-1.3:1.0: tx data[0]: 9e ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f 9e ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f 91 ff (len=81 sz=81)
[1549021.131992] mceusb 1-1.3:1.0: Raw IR data, 30 pulse/space samples
[1549021.133592] mceusb 1-1.3:1.0: tx done status = 81 (wait = 100, expire = 100 (1000ms), urb->actual_length = 81, urb->status = 0)

Hex dumps limited to 64 bytes.
0xff is MCE maximum time pulse, 0x7f is MCE maximum time space.

$ cat -n irdata2 | head -3
     1  carrier 36000
     2  pulse 50
     3  space 50
$ cat -n irdata2 | tail -3
   254  pulse 50
   255  space 50
   256  pulse 50
$ ir-ctl -s irdata2

[1549306.586998] mceusb 1-1.3:1.0: tx data[0]: 9f 08 03 (len=3 sz=3)
[1549306.587015] mceusb 1-1.3:1.0: Request transmit blaster mask of 0x03
[1549306.587252] mceusb 1-1.3:1.0: tx done status = 3 (wait = 100, expire = 100 (1000ms), urb->actual_length = 3, urb->status = 0)
[1549306.613275] mceusb 1-1.3:1.0: tx data[0]: 9e 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 9e 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 9e 81 (len=128 sz=128)
[1549306.613291] mceusb 1-1.3:1.0: Raw IR data, 30 pulse/space samples
[1549306.614837] mceusb 1-1.3:1.0: tx done status = 128 (wait = 100, expire = 100 (1000ms), urb->actual_length = 128, urb->status = 0)
[1549306.614861] mceusb 1-1.3:1.0: tx data[0]: 9e 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 9e 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 9e 01 (len=128 sz=128)
[1549306.614869] mceusb 1-1.3:1.0: Raw IR data, 30 pulse/space samples
[1549306.620199] mceusb 1-1.3:1.0: tx done status = 128 (wait = 100, expire = 100 (1000ms), urb->actual_length = 128, urb->status = 0)
[1549306.620212] mceusb 1-1.3:1.0: tx data[0]: 89 81 01 81 01 81 01 81 01 81 80 (len=11 sz=11)
[1549306.620221] mceusb 1-1.3:1.0: Raw IR data, 9 pulse/space samples
[1549306.633294] mceusb 1-1.3:1.0: tx done status = 11 (wait = 98, expire = 100 (1000ms), urb->actual_length = 11, urb->status = 0)

Hex dumps limited to 64 bytes.
0x81 is MCE minimum time pulse, 0x01 is MCE minimum time space.
TX IR part 3 sz=11 shows 20msec I/O blocking delay
(100expire - 98wait = 2jiffies)

Signed-off-by: A Sun <as1033x@comcast.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/mceusb.c | 334 ++++++++++++++++++++++----------------
 1 file changed, 196 insertions(+), 138 deletions(-)

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 72862e4bec627..a69e940920159 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -31,21 +31,22 @@
 #include <linux/pm_wakeup.h>
 #include <media/rc-core.h>
 
-#define DRIVER_VERSION	"1.94"
+#define DRIVER_VERSION	"1.95"
 #define DRIVER_AUTHOR	"Jarod Wilson <jarod@redhat.com>"
 #define DRIVER_DESC	"Windows Media Center Ed. eHome Infrared Transceiver " \
 			"device driver"
 #define DRIVER_NAME	"mceusb"
 
+#define USB_TX_TIMEOUT		1000 /* in milliseconds */
 #define USB_CTRL_MSG_SZ		2  /* Size of usb ctrl msg on gen1 hw */
 #define MCE_G1_INIT_MSGS	40 /* Init messages on gen1 hw to throw out */
 
 /* MCE constants */
-#define MCE_CMDBUF_SIZE		384  /* MCE Command buffer length */
+#define MCE_IRBUF_SIZE		128  /* TX IR buffer length */
 #define MCE_TIME_UNIT		50   /* Approx 50us resolution */
-#define MCE_CODE_LENGTH		5    /* Normal length of packet (with header) */
-#define MCE_PACKET_SIZE		4    /* Normal length of packet (without header) */
-#define MCE_IRDATA_HEADER	0x84 /* Actual header format is 0x80 + num_bytes */
+#define MCE_PACKET_SIZE		31   /* Max length of packet (with header) */
+#define MCE_IRDATA_HEADER	(0x80 + MCE_PACKET_SIZE - 1)
+				     /* Actual format is 0x80 + num_bytes */
 #define MCE_IRDATA_TRAILER	0x80 /* End of IR data */
 #define MCE_MAX_CHANNELS	2    /* Two transmitters, hardware dependent? */
 #define MCE_DEFAULT_TX_MASK	0x03 /* Vals: TX1=0x01, TX2=0x02, ALL=0x03 */
@@ -607,9 +608,9 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len,
 	if (len <= skip)
 		return;
 
-	dev_dbg(dev, "%cx data: %*ph (length=%d)",
-		(out ? 't' : 'r'),
-		min(len, buf_len - offset), buf + offset, len);
+	dev_dbg(dev, "%cx data[%d]: %*ph (len=%d sz=%d)",
+		(out ? 't' : 'r'), offset,
+		min(len, buf_len - offset), buf + offset, len, buf_len);
 
 	inout = out ? "Request" : "Got";
 
@@ -731,6 +732,9 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len,
 		case MCE_RSP_CMD_ILLEGAL:
 			dev_dbg(dev, "Illegal PORT_IR command");
 			break;
+		case MCE_RSP_TX_TIMEOUT:
+			dev_dbg(dev, "IR TX timeout (TX buffer underrun)");
+			break;
 		default:
 			dev_dbg(dev, "Unknown command 0x%02x 0x%02x",
 				 cmd, subcmd);
@@ -745,13 +749,14 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len,
 		dev_dbg(dev, "End of raw IR data");
 	else if ((cmd != MCE_CMD_PORT_IR) &&
 		 ((cmd & MCE_PORT_MASK) == MCE_COMMAND_IRDATA))
-		dev_dbg(dev, "Raw IR data, %d pulse/space samples", ir->rem);
+		dev_dbg(dev, "Raw IR data, %d pulse/space samples",
+			cmd & MCE_PACKET_LENGTH_MASK);
 #endif
 }
 
 /*
  * Schedule work that can't be done in interrupt handlers
- * (mceusb_dev_recv() and mce_async_callback()) nor tasklets.
+ * (mceusb_dev_recv() and mce_write_callback()) nor tasklets.
  * Invokes mceusb_deferred_kevent() for recovering from
  * error events specified by the kevent bit field.
  */
@@ -764,23 +769,80 @@ static void mceusb_defer_kevent(struct mceusb_dev *ir, int kevent)
 		dev_dbg(ir->dev, "kevent %d scheduled", kevent);
 }
 
-static void mce_async_callback(struct urb *urb)
+static void mce_write_callback(struct urb *urb)
 {
-	struct mceusb_dev *ir;
-	int len;
-
 	if (!urb)
 		return;
 
-	ir = urb->context;
+	complete(urb->context);
+}
+
+/*
+ * Write (TX/send) data to MCE device USB endpoint out.
+ * Used for IR blaster TX and MCE device commands.
+ *
+ * Return: The number of bytes written (> 0) or errno (< 0).
+ */
+static int mce_write(struct mceusb_dev *ir, u8 *data, int size)
+{
+	int ret;
+	struct urb *urb;
+	struct device *dev = ir->dev;
+	unsigned char *buf_out;
+	struct completion tx_done;
+	unsigned long expire;
+	unsigned long ret_wait;
+
+	mceusb_dev_printdata(ir, data, size, 0, size, true);
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (unlikely(!urb)) {
+		dev_err(dev, "Error: mce write couldn't allocate urb");
+		return -ENOMEM;
+	}
+
+	buf_out = kmalloc(size, GFP_KERNEL);
+	if (!buf_out) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	init_completion(&tx_done);
+
+	/* outbound data */
+	if (usb_endpoint_xfer_int(ir->usb_ep_out))
+		usb_fill_int_urb(urb, ir->usbdev, ir->pipe_out,
+				 buf_out, size, mce_write_callback, &tx_done,
+				 ir->usb_ep_out->bInterval);
+	else
+		usb_fill_bulk_urb(urb, ir->usbdev, ir->pipe_out,
+				  buf_out, size, mce_write_callback, &tx_done);
+	memcpy(buf_out, data, size);
+
+	ret = usb_submit_urb(urb, GFP_KERNEL);
+	if (ret) {
+		dev_err(dev, "Error: mce write submit urb error = %d", ret);
+		kfree(buf_out);
+		usb_free_urb(urb);
+		return ret;
+	}
+
+	expire = msecs_to_jiffies(USB_TX_TIMEOUT);
+	ret_wait = wait_for_completion_timeout(&tx_done, expire);
+	if (!ret_wait) {
+		dev_err(dev, "Error: mce write timed out (expire = %lu (%dms))",
+			expire, USB_TX_TIMEOUT);
+		usb_kill_urb(urb);
+		ret = (urb->status == -ENOENT ? -ETIMEDOUT : urb->status);
+	} else {
+		ret = urb->status;
+	}
+	if (ret >= 0)
+		ret = urb->actual_length;	/* bytes written */
 
 	switch (urb->status) {
 	/* success */
 	case 0:
-		len = urb->actual_length;
-
-		mceusb_dev_printdata(ir, urb->transfer_buffer, len,
-				     0, len, true);
 		break;
 
 	case -ECONNRESET:
@@ -790,140 +852,135 @@ static void mce_async_callback(struct urb *urb)
 		break;
 
 	case -EPIPE:
-		dev_err(ir->dev, "Error: request urb status = %d (TX HALT)",
+		dev_err(ir->dev, "Error: mce write urb status = %d (TX HALT)",
 			urb->status);
 		mceusb_defer_kevent(ir, EVENT_TX_HALT);
 		break;
 
 	default:
-		dev_err(ir->dev, "Error: request urb status = %d", urb->status);
+		dev_err(ir->dev, "Error: mce write urb status = %d",
+			urb->status);
 		break;
 	}
 
-	/* the transfer buffer and urb were allocated in mce_request_packet */
-	kfree(urb->transfer_buffer);
-	usb_free_urb(urb);
-}
-
-/* request outgoing (send) usb packet - used to initialize remote */
-static void mce_request_packet(struct mceusb_dev *ir, unsigned char *data,
-								int size)
-{
-	int res;
-	struct urb *async_urb;
-	struct device *dev = ir->dev;
-	unsigned char *async_buf;
+	dev_dbg(dev, "tx done status = %d (wait = %lu, expire = %lu (%dms), urb->actual_length = %d, urb->status = %d)",
+		ret, ret_wait, expire, USB_TX_TIMEOUT,
+		urb->actual_length, urb->status);
 
-	async_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (unlikely(!async_urb)) {
-		dev_err(dev, "Error, couldn't allocate urb!");
-		return;
-	}
-
-	async_buf = kmalloc(size, GFP_KERNEL);
-	if (!async_buf) {
-		usb_free_urb(async_urb);
-		return;
-	}
-
-	/* outbound data */
-	if (usb_endpoint_xfer_int(ir->usb_ep_out))
-		usb_fill_int_urb(async_urb, ir->usbdev, ir->pipe_out,
-				 async_buf, size, mce_async_callback, ir,
-				 ir->usb_ep_out->bInterval);
-	else
-		usb_fill_bulk_urb(async_urb, ir->usbdev, ir->pipe_out,
-				  async_buf, size, mce_async_callback, ir);
-
-	memcpy(async_buf, data, size);
-
-	dev_dbg(dev, "send request called (size=%#x)", size);
+	kfree(buf_out);
+	usb_free_urb(urb);
 
-	res = usb_submit_urb(async_urb, GFP_ATOMIC);
-	if (res) {
-		dev_err(dev, "send request FAILED! (res=%d)", res);
-		kfree(async_buf);
-		usb_free_urb(async_urb);
-		return;
-	}
-	dev_dbg(dev, "send request complete (res=%d)", res);
+	return ret;
 }
 
-static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
+static void mce_command_out(struct mceusb_dev *ir, u8 *data, int size)
 {
 	int rsize = sizeof(DEVICE_RESUME);
 
 	if (ir->need_reset) {
 		ir->need_reset = false;
-		mce_request_packet(ir, DEVICE_RESUME, rsize);
+		mce_write(ir, DEVICE_RESUME, rsize);
 		msleep(10);
 	}
 
-	mce_request_packet(ir, data, size);
+	mce_write(ir, data, size);
 	msleep(10);
 }
 
-/* Send data out the IR blaster port(s) */
+/*
+ * Transmit IR out the MCE device IR blaster port(s).
+ *
+ * Convert IR pulse/space sequence from LIRC to MCE format.
+ * Break up a long IR sequence into multiple parts (MCE IR data packets).
+ *
+ * u32 txbuf[] consists of IR pulse, space, ..., and pulse times in usec.
+ * Pulses and spaces are implicit by their position.
+ * The first IR sample, txbuf[0], is always a pulse.
+ *
+ * u8 irbuf[] consists of multiple IR data packets for the MCE device.
+ * A packet is 1 u8 MCE_IRDATA_HEADER and up to 30 u8 IR samples.
+ * An IR sample is 1-bit pulse/space flag with 7-bit time
+ * in MCE time units (50usec).
+ *
+ * Return: The number of IR samples sent (> 0) or errno (< 0).
+ */
 static int mceusb_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count)
 {
 	struct mceusb_dev *ir = dev->priv;
-	int i, length, ret = 0;
-	int cmdcount = 0;
-	unsigned char cmdbuf[MCE_CMDBUF_SIZE];
-
-	/* MCE tx init header */
-	cmdbuf[cmdcount++] = MCE_CMD_PORT_IR;
-	cmdbuf[cmdcount++] = MCE_CMD_SETIRTXPORTS;
-	cmdbuf[cmdcount++] = ir->tx_mask;
+	u8 cmdbuf[3] = { MCE_CMD_PORT_IR, MCE_CMD_SETIRTXPORTS, 0x00 };
+	u8 irbuf[MCE_IRBUF_SIZE];
+	int ircount = 0;
+	unsigned int irsample;
+	int i, length, ret;
 
 	/* Send the set TX ports command */
-	mce_async_out(ir, cmdbuf, cmdcount);
-	cmdcount = 0;
-
-	/* Generate mce packet data */
-	for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) {
-		txbuf[i] = txbuf[i] / MCE_TIME_UNIT;
-
-		do { /* loop to support long pulses/spaces > 127*50us=6.35ms */
-
-			/* Insert mce packet header every 4th entry */
-			if ((cmdcount < MCE_CMDBUF_SIZE) &&
-			    (cmdcount % MCE_CODE_LENGTH) == 0)
-				cmdbuf[cmdcount++] = MCE_IRDATA_HEADER;
-
-			/* Insert mce packet data */
-			if (cmdcount < MCE_CMDBUF_SIZE)
-				cmdbuf[cmdcount++] =
-					(txbuf[i] < MCE_PULSE_BIT ?
-					 txbuf[i] : MCE_MAX_PULSE_LENGTH) |
-					 (i & 1 ? 0x00 : MCE_PULSE_BIT);
-			else {
-				ret = -EINVAL;
-				goto out;
+	cmdbuf[2] = ir->tx_mask;
+	mce_command_out(ir, cmdbuf, sizeof(cmdbuf));
+
+	/* Generate mce IR data packet */
+	for (i = 0; i < count; i++) {
+		irsample = txbuf[i] / MCE_TIME_UNIT;
+
+		/* loop to support long pulses/spaces > 6350us (127*50us) */
+		while (irsample > 0) {
+			/* Insert IR header every 30th entry */
+			if (ircount % MCE_PACKET_SIZE == 0) {
+				/* Room for IR header and one IR sample? */
+				if (ircount >= MCE_IRBUF_SIZE - 1) {
+					/* Send near full buffer */
+					ret = mce_write(ir, irbuf, ircount);
+					if (ret < 0)
+						return ret;
+					ircount = 0;
+				}
+				irbuf[ircount++] = MCE_IRDATA_HEADER;
 			}
 
-		} while ((txbuf[i] > MCE_MAX_PULSE_LENGTH) &&
-			 (txbuf[i] -= MCE_MAX_PULSE_LENGTH));
-	}
-
-	/* Check if we have room for the empty packet at the end */
-	if (cmdcount >= MCE_CMDBUF_SIZE) {
-		ret = -EINVAL;
-		goto out;
-	}
+			/* Insert IR sample */
+			if (irsample <= MCE_MAX_PULSE_LENGTH) {
+				irbuf[ircount] = irsample;
+				irsample = 0;
+			} else {
+				irbuf[ircount] = MCE_MAX_PULSE_LENGTH;
+				irsample -= MCE_MAX_PULSE_LENGTH;
+			}
+			/*
+			 * Even i = IR pulse
+			 * Odd  i = IR space
+			 */
+			irbuf[ircount] |= (i & 1 ? 0 : MCE_PULSE_BIT);
+			ircount++;
+
+			/* IR buffer full? */
+			if (ircount >= MCE_IRBUF_SIZE) {
+				/* Fix packet length in last header */
+				length = ircount % MCE_PACKET_SIZE;
+				if (length > 0)
+					irbuf[ircount - length] -=
+						MCE_PACKET_SIZE - length;
+				/* Send full buffer */
+				ret = mce_write(ir, irbuf, ircount);
+				if (ret < 0)
+					return ret;
+				ircount = 0;
+			}
+		}
+	} /* after for loop, 0 <= ircount < MCE_IRBUF_SIZE */
 
 	/* Fix packet length in last header */
-	length = cmdcount % MCE_CODE_LENGTH;
-	cmdbuf[cmdcount - length] -= MCE_CODE_LENGTH - length;
+	length = ircount % MCE_PACKET_SIZE;
+	if (length > 0)
+		irbuf[ircount - length] -= MCE_PACKET_SIZE - length;
 
-	/* All mce commands end with an empty packet (0x80) */
-	cmdbuf[cmdcount++] = MCE_IRDATA_TRAILER;
+	/* Append IR trailer (0x80) to final partial (or empty) IR buffer */
+	irbuf[ircount++] = MCE_IRDATA_TRAILER;
 
-	/* Transmit the command to the mce device */
-	mce_async_out(ir, cmdbuf, cmdcount);
+	/* Send final buffer */
+	ret = mce_write(ir, irbuf, ircount);
+	if (ret < 0)
+		return ret;
 
-out:
-	return ret ? ret : count;
+	return count;
 }
 
 /* Sets active IR outputs -- mce devices typically have two */
@@ -963,7 +1020,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 			cmdbuf[2] = MCE_CMD_SIG_END;
 			cmdbuf[3] = MCE_IRDATA_TRAILER;
 			dev_dbg(ir->dev, "disabling carrier modulation");
-			mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+			mce_command_out(ir, cmdbuf, sizeof(cmdbuf));
 			return 0;
 		}
 
@@ -977,7 +1034,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 								carrier);
 
 				/* Transmit new carrier to mce device */
-				mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+				mce_command_out(ir, cmdbuf, sizeof(cmdbuf));
 				return 0;
 			}
 		}
@@ -1000,10 +1057,10 @@ static int mceusb_set_timeout(struct rc_dev *dev, unsigned int timeout)
 	cmdbuf[2] = units >> 8;
 	cmdbuf[3] = units;
 
-	mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+	mce_command_out(ir, cmdbuf, sizeof(cmdbuf));
 
 	/* get receiver timeout value */
-	mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
+	mce_command_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
 
 	return 0;
 }
@@ -1028,7 +1085,7 @@ static int mceusb_set_rx_wideband(struct rc_dev *dev, int enable)
 		ir->wideband_rx_enabled = false;
 		cmdbuf[2] = 1;	/* port 1 is long range receiver */
 	}
-	mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+	mce_command_out(ir, cmdbuf, sizeof(cmdbuf));
 	/* response from device sets ir->learning_active */
 
 	return 0;
@@ -1051,7 +1108,7 @@ static int mceusb_set_rx_carrier_report(struct rc_dev *dev, int enable)
 		ir->carrier_report_enabled = true;
 		if (!ir->learning_active) {
 			cmdbuf[2] = 2;	/* port 2 is short range receiver */
-			mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+			mce_command_out(ir, cmdbuf, sizeof(cmdbuf));
 		}
 	} else {
 		ir->carrier_report_enabled = false;
@@ -1062,7 +1119,7 @@ static int mceusb_set_rx_carrier_report(struct rc_dev *dev, int enable)
 		 */
 		if (ir->learning_active && !ir->wideband_rx_enabled) {
 			cmdbuf[2] = 1;	/* port 1 is long range receiver */
-			mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+			mce_command_out(ir, cmdbuf, sizeof(cmdbuf));
 		}
 	}
 
@@ -1141,6 +1198,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index)
 		}
 		break;
 	case MCE_RSP_CMD_ILLEGAL:
+	case MCE_RSP_TX_TIMEOUT:
 		ir->need_reset = true;
 		break;
 	default:
@@ -1279,7 +1337,7 @@ static void mceusb_get_emulator_version(struct mceusb_dev *ir)
 {
 	/* If we get no reply or an illegal command reply, its ver 1, says MS */
 	ir->emver = 1;
-	mce_async_out(ir, GET_EMVER, sizeof(GET_EMVER));
+	mce_command_out(ir, GET_EMVER, sizeof(GET_EMVER));
 }
 
 static void mceusb_gen1_init(struct mceusb_dev *ir)
@@ -1325,10 +1383,10 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 	dev_dbg(dev, "set handshake  - retC = %d", ret);
 
 	/* device resume */
-	mce_async_out(ir, DEVICE_RESUME, sizeof(DEVICE_RESUME));
+	mce_command_out(ir, DEVICE_RESUME, sizeof(DEVICE_RESUME));
 
 	/* get hw/sw revision? */
-	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
+	mce_command_out(ir, GET_REVISION, sizeof(GET_REVISION));
 
 	kfree(data);
 }
@@ -1336,13 +1394,13 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 static void mceusb_gen2_init(struct mceusb_dev *ir)
 {
 	/* device resume */
-	mce_async_out(ir, DEVICE_RESUME, sizeof(DEVICE_RESUME));
+	mce_command_out(ir, DEVICE_RESUME, sizeof(DEVICE_RESUME));
 
 	/* get wake version (protocol, key, address) */
-	mce_async_out(ir, GET_WAKEVERSION, sizeof(GET_WAKEVERSION));
+	mce_command_out(ir, GET_WAKEVERSION, sizeof(GET_WAKEVERSION));
 
 	/* unknown what this one actually returns... */
-	mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
+	mce_command_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
 }
 
 static void mceusb_get_parameters(struct mceusb_dev *ir)
@@ -1356,24 +1414,24 @@ static void mceusb_get_parameters(struct mceusb_dev *ir)
 	ir->num_rxports = 2;
 
 	/* get number of tx and rx ports */
-	mce_async_out(ir, GET_NUM_PORTS, sizeof(GET_NUM_PORTS));
+	mce_command_out(ir, GET_NUM_PORTS, sizeof(GET_NUM_PORTS));
 
 	/* get the carrier and frequency */
-	mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
+	mce_command_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
 
 	if (ir->num_txports && !ir->flags.no_tx)
 		/* get the transmitter bitmask */
-		mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
+		mce_command_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
 
 	/* get receiver timeout value */
-	mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
+	mce_command_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
 
 	/* get receiver sensor setting */
-	mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
+	mce_command_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
 
 	for (i = 0; i < ir->num_txports; i++) {
 		cmdbuf[2] = i;
-		mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+		mce_command_out(ir, cmdbuf, sizeof(cmdbuf));
 	}
 }
 
@@ -1382,7 +1440,7 @@ static void mceusb_flash_led(struct mceusb_dev *ir)
 	if (ir->emver < 2)
 		return;
 
-	mce_async_out(ir, FLASH_LED, sizeof(FLASH_LED));
+	mce_command_out(ir, FLASH_LED, sizeof(FLASH_LED));
 }
 
 /*
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 098/185] media: dvb-frontends: use ida for pll number
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (95 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 097/185] media: mceusb: fix (eliminate) TX IR signal length limit Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 099/185] posix-cpu-timers: Sanitize bogus WARNONS Sasha Levin
                   ` (86 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sean Young, syzbot+8a8f48672560c8ca59dd, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: Sean Young <sean@mess.org>

[ Upstream commit c268e7adea52be0093de1164c425f3c8d8927770 ]

KASAN: global-out-of-bounds Read in dvb_pll_attach

Syzbot reported global-out-of-bounds Read in dvb_pll_attach, while
accessing id[dvb_pll_devcount], because dvb_pll_devcount was 65,
that is more than size of 'id' which is DVB_PLL_MAX(64).

Rather than increasing dvb_pll_devcount every time, use ida so that
numbers are allocated correctly. This does mean that no more than
64 devices can be attached at the same time, but this is more than
sufficient.

usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the
software demuxer
dvbdev: DVB: registering new adapter (774 Friio White ISDB-T USB2.0)
usb 1-1: media controller created
dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
tc90522 0-0018: Toshiba TC90522 attached.
usb 1-1: DVB: registering adapter 0 frontend 0 (Toshiba TC90522 ISDB-T
module)...
dvbdev: dvb_create_media_entity: media entity 'Toshiba TC90522 ISDB-T
module' registered.
==================================================================
BUG: KASAN: global-out-of-bounds in dvb_pll_attach+0x6c5/0x830
drivers/media/dvb-frontends/dvb-pll.c:798
Read of size 4 at addr ffffffff89c9e5e0 by task kworker/0:1/12

CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.2.0-rc6+ #13
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x67/0x231 mm/kasan/report.c:188
  __kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317
  kasan_report+0xe/0x20 mm/kasan/common.c:614
  dvb_pll_attach+0x6c5/0x830 drivers/media/dvb-frontends/dvb-pll.c:798
  dvb_pll_probe+0xfe/0x174 drivers/media/dvb-frontends/dvb-pll.c:877
  i2c_device_probe+0x790/0xaa0 drivers/i2c/i2c-core-base.c:389
  really_probe+0x281/0x660 drivers/base/dd.c:509
  driver_probe_device+0x104/0x210 drivers/base/dd.c:670
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:843
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2111
  i2c_new_client_device+0x5b3/0xc40 drivers/i2c/i2c-core-base.c:778
  i2c_new_device+0x19/0x50 drivers/i2c/i2c-core-base.c:821
  dvb_module_probe+0xf9/0x220 drivers/media/dvb-core/dvbdev.c:985
  friio_tuner_attach+0x125/0x1d0 drivers/media/usb/dvb-usb-v2/gl861.c:536
  dvb_usbv2_adapter_frontend_init
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:675 [inline]
  dvb_usbv2_adapter_init drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:804
[inline]
  dvb_usbv2_init drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:865 [inline]
  dvb_usbv2_probe.cold+0x24dc/0x255d
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:980
  usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
  really_probe+0x281/0x660 drivers/base/dd.c:509
  driver_probe_device+0x104/0x210 drivers/base/dd.c:670
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:843
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2111
  usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
  generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
  usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
  really_probe+0x281/0x660 drivers/base/dd.c:509
  driver_probe_device+0x104/0x210 drivers/base/dd.c:670
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:843
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2111
  usb_new_device.cold+0x8c1/0x1016 drivers/usb/core/hub.c:2534
  hub_port_connect drivers/usb/core/hub.c:5089 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
  port_event drivers/usb/core/hub.c:5350 [inline]
  hub_event+0x1ada/0x3590 drivers/usb/core/hub.c:5432
  process_one_work+0x905/0x1570 kernel/workqueue.c:2269
  process_scheduled_works kernel/workqueue.c:2331 [inline]
  worker_thread+0x7ab/0xe20 kernel/workqueue.c:2417
  kthread+0x30b/0x410 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

The buggy address belongs to the variable:
  id+0x100/0x120

Memory state around the buggy address:
  ffffffff89c9e480: fa fa fa fa 00 00 fa fa fa fa fa fa 00 00 00 00
  ffffffff89c9e500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> ffffffff89c9e580: 00 00 00 00 00 00 00 00 00 00 00 00 fa fa fa fa
                                                        ^
  ffffffff89c9e600: 04 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
  ffffffff89c9e680: 04 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
==================================================================

Reported-by: syzbot+8a8f48672560c8ca59dd@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-frontends/dvb-pll.c | 40 ++++++++++++++++-----------
 1 file changed, 24 insertions(+), 16 deletions(-)

diff --git a/drivers/media/dvb-frontends/dvb-pll.c b/drivers/media/dvb-frontends/dvb-pll.c
index ba0c49107bd28..d45b4ddc8f912 100644
--- a/drivers/media/dvb-frontends/dvb-pll.c
+++ b/drivers/media/dvb-frontends/dvb-pll.c
@@ -9,6 +9,7 @@
 
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/idr.h>
 #include <linux/dvb/frontend.h>
 #include <asm/types.h>
 
@@ -34,8 +35,7 @@ struct dvb_pll_priv {
 };
 
 #define DVB_PLL_MAX 64
-
-static unsigned int dvb_pll_devcount;
+static DEFINE_IDA(pll_ida);
 
 static int debug;
 module_param(debug, int, 0644);
@@ -787,6 +787,7 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
 	struct dvb_pll_priv *priv = NULL;
 	int ret;
 	const struct dvb_pll_desc *desc;
+	int nr;
 
 	b1 = kmalloc(1, GFP_KERNEL);
 	if (!b1)
@@ -795,9 +796,14 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
 	b1[0] = 0;
 	msg.buf = b1;
 
-	if ((id[dvb_pll_devcount] > DVB_PLL_UNDEFINED) &&
-	    (id[dvb_pll_devcount] < ARRAY_SIZE(pll_list)))
-		pll_desc_id = id[dvb_pll_devcount];
+	nr = ida_simple_get(&pll_ida, 0, DVB_PLL_MAX, GFP_KERNEL);
+	if (nr < 0) {
+		kfree(b1);
+		return NULL;
+	}
+
+	if (id[nr] > DVB_PLL_UNDEFINED && id[nr] < ARRAY_SIZE(pll_list))
+		pll_desc_id = id[nr];
 
 	BUG_ON(pll_desc_id < 1 || pll_desc_id >= ARRAY_SIZE(pll_list));
 
@@ -808,24 +814,20 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
 			fe->ops.i2c_gate_ctrl(fe, 1);
 
 		ret = i2c_transfer (i2c, &msg, 1);
-		if (ret != 1) {
-			kfree(b1);
-			return NULL;
-		}
+		if (ret != 1)
+			goto out;
 		if (fe->ops.i2c_gate_ctrl)
 			     fe->ops.i2c_gate_ctrl(fe, 0);
 	}
 
 	priv = kzalloc(sizeof(struct dvb_pll_priv), GFP_KERNEL);
-	if (!priv) {
-		kfree(b1);
-		return NULL;
-	}
+	if (!priv)
+		goto out;
 
 	priv->pll_i2c_address = pll_addr;
 	priv->i2c = i2c;
 	priv->pll_desc = desc;
-	priv->nr = dvb_pll_devcount++;
+	priv->nr = nr;
 
 	memcpy(&fe->ops.tuner_ops, &dvb_pll_tuner_ops,
 	       sizeof(struct dvb_tuner_ops));
@@ -858,6 +860,11 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
 	kfree(b1);
 
 	return fe;
+out:
+	kfree(b1);
+	ida_simple_remove(&pll_ida, nr);
+
+	return NULL;
 }
 EXPORT_SYMBOL(dvb_pll_attach);
 
@@ -894,9 +901,10 @@ dvb_pll_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 static int dvb_pll_remove(struct i2c_client *client)
 {
-	struct dvb_frontend *fe;
+	struct dvb_frontend *fe = i2c_get_clientdata(client);
+	struct dvb_pll_priv *priv = fe->tuner_priv;
 
-	fe = i2c_get_clientdata(client);
+	ida_simple_remove(&pll_ida, priv->nr);
 	dvb_pll_release(fe);
 	return 0;
 }
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 099/185] posix-cpu-timers: Sanitize bogus WARNONS
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (96 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 098/185] media: dvb-frontends: use ida for pll number Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 100/185] media: dvb-core: fix a memory leak bug Sasha Levin
                   ` (85 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Thomas Gleixner, Frederic Weisbecker, Sasha Levin

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit 692117c1f7a6770ed41dd8f277cd9fed1dfb16f1 ]

Warning when p == NULL and then proceeding and dereferencing p does not
make any sense as the kernel will crash with a NULL pointer dereference
right away.

Bailing out when p == NULL and returning an error code does not cure the
underlying problem which caused p to be NULL. Though it might allow to
do proper debugging.

Same applies to the clock id check in set_process_cpu_timer().

Clean them up and make them return without trying to do further damage.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190819143801.846497772@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/posix-cpu-timers.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c
index 0a426f4e31251..5bbad147a90cf 100644
--- a/kernel/time/posix-cpu-timers.c
+++ b/kernel/time/posix-cpu-timers.c
@@ -375,7 +375,8 @@ static int posix_cpu_timer_del(struct k_itimer *timer)
 	struct sighand_struct *sighand;
 	struct task_struct *p = timer->it.cpu.task;
 
-	WARN_ON_ONCE(p == NULL);
+	if (WARN_ON_ONCE(!p))
+		return -EINVAL;
 
 	/*
 	 * Protect against sighand release/switch in exit/exec and process/
@@ -580,7 +581,8 @@ static int posix_cpu_timer_set(struct k_itimer *timer, int timer_flags,
 	u64 old_expires, new_expires, old_incr, val;
 	int ret;
 
-	WARN_ON_ONCE(p == NULL);
+	if (WARN_ON_ONCE(!p))
+		return -EINVAL;
 
 	/*
 	 * Use the to_ktime conversion because that clamps the maximum
@@ -715,10 +717,11 @@ static int posix_cpu_timer_set(struct k_itimer *timer, int timer_flags,
 
 static void posix_cpu_timer_get(struct k_itimer *timer, struct itimerspec64 *itp)
 {
-	u64 now;
 	struct task_struct *p = timer->it.cpu.task;
+	u64 now;
 
-	WARN_ON_ONCE(p == NULL);
+	if (WARN_ON_ONCE(!p))
+		return;
 
 	/*
 	 * Easy part: convert the reload time.
@@ -1000,12 +1003,13 @@ static void check_process_timers(struct task_struct *tsk,
  */
 static void posix_cpu_timer_rearm(struct k_itimer *timer)
 {
+	struct task_struct *p = timer->it.cpu.task;
 	struct sighand_struct *sighand;
 	unsigned long flags;
-	struct task_struct *p = timer->it.cpu.task;
 	u64 now;
 
-	WARN_ON_ONCE(p == NULL);
+	if (WARN_ON_ONCE(!p))
+		return;
 
 	/*
 	 * Fetch the current sample and update the timer's expiry time.
@@ -1202,7 +1206,9 @@ void set_process_cpu_timer(struct task_struct *tsk, unsigned int clock_idx,
 	u64 now;
 	int ret;
 
-	WARN_ON_ONCE(clock_idx == CPUCLOCK_SCHED);
+	if (WARN_ON_ONCE(clock_idx >= CPUCLOCK_SCHED))
+		return;
+
 	ret = cpu_timer_sample_group(clock_idx, tsk, &now);
 
 	if (oldval && ret != -EINVAL) {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 100/185] media: dvb-core: fix a memory leak bug
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (97 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 099/185] posix-cpu-timers: Sanitize bogus WARNONS Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 101/185] EDAC/amd64: Support more than two controllers for chip selects handling Sasha Levin
                   ` (84 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Wenwen Wang, Sean Young, Mauro Carvalho Chehab, Sasha Levin, linux-media

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit fcd5ce4b3936242e6679875a4d3c3acfc8743e15 ]

In dvb_create_media_entity(), 'dvbdev->entity' is allocated through
kzalloc(). Then, 'dvbdev->pads' is allocated through kcalloc(). However, if
kcalloc() fails, the allocated 'dvbdev->entity' is not deallocated, leading
to a memory leak bug. To fix this issue, free 'dvbdev->entity' before
returning -ENOMEM.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvbdev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index a3393cd4e584f..7557fbf9d3068 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -339,8 +339,10 @@ static int dvb_create_media_entity(struct dvb_device *dvbdev,
 	if (npads) {
 		dvbdev->pads = kcalloc(npads, sizeof(*dvbdev->pads),
 				       GFP_KERNEL);
-		if (!dvbdev->pads)
+		if (!dvbdev->pads) {
+			kfree(dvbdev->entity);
 			return -ENOMEM;
+		}
 	}
 
 	switch (type) {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 101/185] EDAC/amd64: Support more than two controllers for chip selects handling
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (98 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 100/185] media: dvb-core: fix a memory leak bug Sasha Levin
@ 2019-09-22 18:47 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 102/185] libperf: Fix alignment trap with xyarray contents in 'perf stat' Sasha Levin
                   ` (83 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Yazen Ghannam, Borislav Petkov, linux-edac, James Morse,
	Mauro Carvalho Chehab, Tony Luck, Sasha Levin

From: Yazen Ghannam <yazen.ghannam@amd.com>

[ Upstream commit d971e28e2ce4696fcc32998c8aced5e47701fffe ]

The struct chip_select array that's used for saving chip select bases
and masks is fixed at length of two. There should be one struct
chip_select for each controller, so this array should be increased to
support systems that may have more than two controllers.

Increase the size of the struct chip_select array to eight, which is the
largest number of controllers per die currently supported on AMD
systems.

Fix number of DIMMs and Chip Select bases/masks on Family17h, because
AMD Family 17h systems support 2 DIMMs, 4 CS bases, and 2 CS masks per
channel.

Also, carve out the Family 17h+ reading of the bases/masks into a
separate function. This effectively reverts the original bases/masks
reading code to before Family 17h support was added.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190821235938.118710-2-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/amd64_edac.c | 123 +++++++++++++++++++++-----------------
 drivers/edac/amd64_edac.h |   5 +-
 2 files changed, 71 insertions(+), 57 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 873437be86d9c..dd60cf5a3d969 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -810,7 +810,7 @@ static void debug_display_dimm_sizes_df(struct amd64_pvt *pvt, u8 ctrl)
 
 	edac_printk(KERN_DEBUG, EDAC_MC, "UMC%d chip selects:\n", ctrl);
 
-	for (dimm = 0; dimm < 4; dimm++) {
+	for (dimm = 0; dimm < 2; dimm++) {
 		size0 = 0;
 		cs0 = dimm * 2;
 
@@ -942,89 +942,102 @@ static void prep_chip_selects(struct amd64_pvt *pvt)
 	} else if (pvt->fam == 0x15 && pvt->model == 0x30) {
 		pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 4;
 		pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 2;
+	} else if (pvt->fam >= 0x17) {
+		int umc;
+
+		for_each_umc(umc) {
+			pvt->csels[umc].b_cnt = 4;
+			pvt->csels[umc].m_cnt = 2;
+		}
+
 	} else {
 		pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
 		pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 4;
 	}
 }
 
+static void read_umc_base_mask(struct amd64_pvt *pvt)
+{
+	u32 umc_base_reg, umc_mask_reg;
+	u32 base_reg, mask_reg;
+	u32 *base, *mask;
+	int cs, umc;
+
+	for_each_umc(umc) {
+		umc_base_reg = get_umc_base(umc) + UMCCH_BASE_ADDR;
+
+		for_each_chip_select(cs, umc, pvt) {
+			base = &pvt->csels[umc].csbases[cs];
+
+			base_reg = umc_base_reg + (cs * 4);
+
+			if (!amd_smn_read(pvt->mc_node_id, base_reg, base))
+				edac_dbg(0, "  DCSB%d[%d]=0x%08x reg: 0x%x\n",
+					 umc, cs, *base, base_reg);
+		}
+
+		umc_mask_reg = get_umc_base(umc) + UMCCH_ADDR_MASK;
+
+		for_each_chip_select_mask(cs, umc, pvt) {
+			mask = &pvt->csels[umc].csmasks[cs];
+
+			mask_reg = umc_mask_reg + (cs * 4);
+
+			if (!amd_smn_read(pvt->mc_node_id, mask_reg, mask))
+				edac_dbg(0, "  DCSM%d[%d]=0x%08x reg: 0x%x\n",
+					 umc, cs, *mask, mask_reg);
+		}
+	}
+}
+
 /*
  * Function 2 Offset F10_DCSB0; read in the DCS Base and DCS Mask registers
  */
 static void read_dct_base_mask(struct amd64_pvt *pvt)
 {
-	int base_reg0, base_reg1, mask_reg0, mask_reg1, cs;
+	int cs;
 
 	prep_chip_selects(pvt);
 
-	if (pvt->umc) {
-		base_reg0 = get_umc_base(0) + UMCCH_BASE_ADDR;
-		base_reg1 = get_umc_base(1) + UMCCH_BASE_ADDR;
-		mask_reg0 = get_umc_base(0) + UMCCH_ADDR_MASK;
-		mask_reg1 = get_umc_base(1) + UMCCH_ADDR_MASK;
-	} else {
-		base_reg0 = DCSB0;
-		base_reg1 = DCSB1;
-		mask_reg0 = DCSM0;
-		mask_reg1 = DCSM1;
-	}
+	if (pvt->umc)
+		return read_umc_base_mask(pvt);
 
 	for_each_chip_select(cs, 0, pvt) {
-		int reg0   = base_reg0 + (cs * 4);
-		int reg1   = base_reg1 + (cs * 4);
+		int reg0   = DCSB0 + (cs * 4);
+		int reg1   = DCSB1 + (cs * 4);
 		u32 *base0 = &pvt->csels[0].csbases[cs];
 		u32 *base1 = &pvt->csels[1].csbases[cs];
 
-		if (pvt->umc) {
-			if (!amd_smn_read(pvt->mc_node_id, reg0, base0))
-				edac_dbg(0, "  DCSB0[%d]=0x%08x reg: 0x%x\n",
-					 cs, *base0, reg0);
-
-			if (!amd_smn_read(pvt->mc_node_id, reg1, base1))
-				edac_dbg(0, "  DCSB1[%d]=0x%08x reg: 0x%x\n",
-					 cs, *base1, reg1);
-		} else {
-			if (!amd64_read_dct_pci_cfg(pvt, 0, reg0, base0))
-				edac_dbg(0, "  DCSB0[%d]=0x%08x reg: F2x%x\n",
-					 cs, *base0, reg0);
+		if (!amd64_read_dct_pci_cfg(pvt, 0, reg0, base0))
+			edac_dbg(0, "  DCSB0[%d]=0x%08x reg: F2x%x\n",
+				 cs, *base0, reg0);
 
-			if (pvt->fam == 0xf)
-				continue;
+		if (pvt->fam == 0xf)
+			continue;
 
-			if (!amd64_read_dct_pci_cfg(pvt, 1, reg0, base1))
-				edac_dbg(0, "  DCSB1[%d]=0x%08x reg: F2x%x\n",
-					 cs, *base1, (pvt->fam == 0x10) ? reg1
-								: reg0);
-		}
+		if (!amd64_read_dct_pci_cfg(pvt, 1, reg0, base1))
+			edac_dbg(0, "  DCSB1[%d]=0x%08x reg: F2x%x\n",
+				 cs, *base1, (pvt->fam == 0x10) ? reg1
+							: reg0);
 	}
 
 	for_each_chip_select_mask(cs, 0, pvt) {
-		int reg0   = mask_reg0 + (cs * 4);
-		int reg1   = mask_reg1 + (cs * 4);
+		int reg0   = DCSM0 + (cs * 4);
+		int reg1   = DCSM1 + (cs * 4);
 		u32 *mask0 = &pvt->csels[0].csmasks[cs];
 		u32 *mask1 = &pvt->csels[1].csmasks[cs];
 
-		if (pvt->umc) {
-			if (!amd_smn_read(pvt->mc_node_id, reg0, mask0))
-				edac_dbg(0, "    DCSM0[%d]=0x%08x reg: 0x%x\n",
-					 cs, *mask0, reg0);
-
-			if (!amd_smn_read(pvt->mc_node_id, reg1, mask1))
-				edac_dbg(0, "    DCSM1[%d]=0x%08x reg: 0x%x\n",
-					 cs, *mask1, reg1);
-		} else {
-			if (!amd64_read_dct_pci_cfg(pvt, 0, reg0, mask0))
-				edac_dbg(0, "    DCSM0[%d]=0x%08x reg: F2x%x\n",
-					 cs, *mask0, reg0);
+		if (!amd64_read_dct_pci_cfg(pvt, 0, reg0, mask0))
+			edac_dbg(0, "    DCSM0[%d]=0x%08x reg: F2x%x\n",
+				 cs, *mask0, reg0);
 
-			if (pvt->fam == 0xf)
-				continue;
+		if (pvt->fam == 0xf)
+			continue;
 
-			if (!amd64_read_dct_pci_cfg(pvt, 1, reg0, mask1))
-				edac_dbg(0, "    DCSM1[%d]=0x%08x reg: F2x%x\n",
-					 cs, *mask1, (pvt->fam == 0x10) ? reg1
-								: reg0);
-		}
+		if (!amd64_read_dct_pci_cfg(pvt, 1, reg0, mask1))
+			edac_dbg(0, "    DCSM1[%d]=0x%08x reg: F2x%x\n",
+				 cs, *mask1, (pvt->fam == 0x10) ? reg1
+							: reg0);
 	}
 }
 
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 8f66472f7adc2..4dce6a2ac75f9 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -96,6 +96,7 @@
 /* Hardware limit on ChipSelect rows per MC and processors per system */
 #define NUM_CHIPSELECTS			8
 #define DRAM_RANGES			8
+#define NUM_CONTROLLERS			8
 
 #define ON true
 #define OFF false
@@ -351,8 +352,8 @@ struct amd64_pvt {
 	u32 dbam0;		/* DRAM Base Address Mapping reg for DCT0 */
 	u32 dbam1;		/* DRAM Base Address Mapping reg for DCT1 */
 
-	/* one for each DCT */
-	struct chip_select csels[2];
+	/* one for each DCT/UMC */
+	struct chip_select csels[NUM_CONTROLLERS];
 
 	/* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */
 	struct dram_range ranges[DRAM_RANGES];
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 102/185] libperf: Fix alignment trap with xyarray contents in 'perf stat'
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (99 preceding siblings ...)
  2019-09-22 18:47 ` [PATCH AUTOSEL 5.2 101/185] EDAC/amd64: Support more than two controllers for chip selects handling Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 103/185] EDAC/amd64: Recognize DRAM device type ECC capability Sasha Levin
                   ` (82 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Gerald BAEZA, Alexander Shishkin, Alexandre Torgue, Andi Kleen,
	Jiri Olsa, Mathieu Poirier, Namhyung Kim, Peter Zijlstra,
	Arnaldo Carvalho de Melo, Sasha Levin

From: Gerald BAEZA <gerald.baeza@st.com>

[ Upstream commit d9c5c083416500e95da098c01be092b937def7fa ]

Following the patch 'perf stat: Fix --no-scale', an alignment trap
happens in process_counter_values() on ARMv7 platforms due to the
attempt to copy non 64 bits aligned double words (pointed by 'count')
via a NEON vectored instruction ('vld1' with 64 bits alignment
constraint).

This patch sets a 64 bits alignment constraint on 'contents[]' field in
'struct xyarray' since the 'count' pointer used above points to such a
structure.

Signed-off-by: Gerald Baeza <gerald.baeza@st.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1566464769-16374-1-git-send-email-gerald.baeza@st.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/xyarray.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/xyarray.h b/tools/perf/util/xyarray.h
index 7ffe562e7ae7f..2627b038b6f2a 100644
--- a/tools/perf/util/xyarray.h
+++ b/tools/perf/util/xyarray.h
@@ -2,6 +2,7 @@
 #ifndef _PERF_XYARRAY_H_
 #define _PERF_XYARRAY_H_ 1
 
+#include <linux/compiler.h>
 #include <sys/types.h>
 
 struct xyarray {
@@ -10,7 +11,7 @@ struct xyarray {
 	size_t entries;
 	size_t max_x;
 	size_t max_y;
-	char contents[];
+	char contents[] __aligned(8);
 };
 
 struct xyarray *xyarray__new(int xlen, int ylen, size_t entry_size);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 103/185] EDAC/amd64: Recognize DRAM device type ECC capability
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (100 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 102/185] libperf: Fix alignment trap with xyarray contents in 'perf stat' Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 104/185] EDAC/amd64: Decode syndrome before translating address Sasha Levin
                   ` (81 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Yazen Ghannam, Borislav Petkov, linux-edac, James Morse,
	Mauro Carvalho Chehab, Tony Luck, Sasha Levin

From: Yazen Ghannam <yazen.ghannam@amd.com>

[ Upstream commit f8be8e5680225ac9caf07d4545f8529b7395327f ]

AMD Family 17h systems support x4 and x16 DRAM devices. However, the
device type is not checked when setting mci.edac_ctl_cap.

Set the appropriate capability flag based on the device type.

Default to x8 DRAM device when neither the x4 or x16 bits are set.

 [ bp: reverse cpk_en check to save an indentation level. ]

Fixes: 2d09d8f301f5 ("EDAC, amd64: Determine EDAC MC capabilities on Fam17h")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190821235938.118710-3-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/amd64_edac.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index dd60cf5a3d969..ffe56a8fe39da 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -3150,12 +3150,15 @@ static bool ecc_enabled(struct pci_dev *F3, u16 nid)
 static inline void
 f17h_determine_edac_ctl_cap(struct mem_ctl_info *mci, struct amd64_pvt *pvt)
 {
-	u8 i, ecc_en = 1, cpk_en = 1;
+	u8 i, ecc_en = 1, cpk_en = 1, dev_x4 = 1, dev_x16 = 1;
 
 	for_each_umc(i) {
 		if (pvt->umc[i].sdp_ctrl & UMC_SDP_INIT) {
 			ecc_en &= !!(pvt->umc[i].umc_cap_hi & UMC_ECC_ENABLED);
 			cpk_en &= !!(pvt->umc[i].umc_cap_hi & UMC_ECC_CHIPKILL_CAP);
+
+			dev_x4  &= !!(pvt->umc[i].dimm_cfg & BIT(6));
+			dev_x16 &= !!(pvt->umc[i].dimm_cfg & BIT(7));
 		}
 	}
 
@@ -3163,8 +3166,15 @@ f17h_determine_edac_ctl_cap(struct mem_ctl_info *mci, struct amd64_pvt *pvt)
 	if (ecc_en) {
 		mci->edac_ctl_cap |= EDAC_FLAG_SECDED;
 
-		if (cpk_en)
+		if (!cpk_en)
+			return;
+
+		if (dev_x4)
 			mci->edac_ctl_cap |= EDAC_FLAG_S4ECD4ED;
+		else if (dev_x16)
+			mci->edac_ctl_cap |= EDAC_FLAG_S16ECD16ED;
+		else
+			mci->edac_ctl_cap |= EDAC_FLAG_S8ECD8ED;
 	}
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 104/185] EDAC/amd64: Decode syndrome before translating address
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (101 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 103/185] EDAC/amd64: Recognize DRAM device type ECC capability Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 105/185] ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 Sasha Levin
                   ` (80 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Yazen Ghannam, Borislav Petkov, linux-edac, James Morse,
	Mauro Carvalho Chehab, Tony Luck, Sasha Levin

From: Yazen Ghannam <yazen.ghannam@amd.com>

[ Upstream commit 8a2eaab7daf03b23ac902481218034ae2fae5e16 ]

AMD Family 17h systems currently require address translation in order to
report the system address of a DRAM ECC error. This is currently done
before decoding the syndrome information. The syndrome information does
not depend on the address translation, so the proper EDAC csrow/channel
reporting can function without the address. However, the syndrome
information will not be decoded if the address translation fails.

Decode the syndrome information before doing the address translation.
The syndrome information is architecturally defined in MCA_SYND and can
be considered robust. The address translation is system-specific and may
fail on newer systems without proper updates to the translation
algorithm.

Fixes: 713ad54675fd ("EDAC, amd64: Define and register UMC error decode function")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190821235938.118710-6-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/amd64_edac.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index ffe56a8fe39da..608fdab566b32 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2550,13 +2550,6 @@ static void decode_umc_error(int node_id, struct mce *m)
 
 	err.channel = find_umc_channel(m);
 
-	if (umc_normaddr_to_sysaddr(m->addr, pvt->mc_node_id, err.channel, &sys_addr)) {
-		err.err_code = ERR_NORM_ADDR;
-		goto log_error;
-	}
-
-	error_address_to_page_and_offset(sys_addr, &err);
-
 	if (!(m->status & MCI_STATUS_SYNDV)) {
 		err.err_code = ERR_SYND;
 		goto log_error;
@@ -2573,6 +2566,13 @@ static void decode_umc_error(int node_id, struct mce *m)
 
 	err.csrow = m->synd & 0x7;
 
+	if (umc_normaddr_to_sysaddr(m->addr, pvt->mc_node_id, err.channel, &sys_addr)) {
+		err.err_code = ERR_NORM_ADDR;
+		goto log_error;
+	}
+
+	error_address_to_page_and_offset(sys_addr, &err);
+
 log_error:
 	__log_ecc_error(mci, &err, ecc_type);
 }
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 105/185] ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (102 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 104/185] EDAC/amd64: Decode syndrome before translating address Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 106/185] soc: renesas: rmobile-sysc: Set GENPD_FLAG_ALWAYS_ON for always-on domain Sasha Levin
                   ` (79 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Masahiro Yamada, Alexandre Belloni, Sasha Levin

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit 9fac85a6db8999922f2cd92dfe2e83e063b31a94 ]

<generated/at91_pm_data-offsets.h> is only generated and included by
arch/arm/mach-at91/, so it does not need to reside in the globally
visible include/generated/.

I renamed it to arch/arm/mach-at91/pm_data-offsets.h since the prefix
'at91_' is just redundant in mach-at91/.

My main motivation of this change is to avoid the race condition for
the parallel build (-j) when CONFIG_IKHEADERS is enabled.

When it is enabled, all the headers under include/ are archived into
kernel/kheaders_data.tar.xz and exposed in the sysfs.

In the parallel build, we have no idea in which order files are built.

 - If at91_pm_data-offsets.h is built before kheaders_data.tar.xz,
   the header will be included in the archive. Probably nobody will
   use it, but it is harmless except that it will increase the archive
   size needlessly.

 - If kheaders_data.tar.xz is built before at91_pm_data-offsets.h,
   the header will not be included in the archive. However, in the next
   build, the archive will be re-generated to include the newly-found
   at91_pm_data-offsets.h. This is not nice from the build system point
   of view.

 - If at91_pm_data-offsets.h and kheaders_data.tar.xz are built at the
   same time, the corrupted header might be included in the archive,
   which does not look nice either.

This commit fixes the race.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20190823024346.591-1-yamada.masahiro@socionext.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-at91/.gitignore   | 1 +
 arch/arm/mach-at91/Makefile     | 5 +++--
 arch/arm/mach-at91/pm_suspend.S | 2 +-
 3 files changed, 5 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/mach-at91/.gitignore

diff --git a/arch/arm/mach-at91/.gitignore b/arch/arm/mach-at91/.gitignore
new file mode 100644
index 0000000000000..2ecd6f51c8a95
--- /dev/null
+++ b/arch/arm/mach-at91/.gitignore
@@ -0,0 +1 @@
+pm_data-offsets.h
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 31b61f0e1c077..de64301dcff25 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -19,9 +19,10 @@ ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
 endif
 
-include/generated/at91_pm_data-offsets.h: arch/arm/mach-at91/pm_data-offsets.s FORCE
+$(obj)/pm_data-offsets.h: $(obj)/pm_data-offsets.s FORCE
 	$(call filechk,offsets,__PM_DATA_OFFSETS_H__)
 
-arch/arm/mach-at91/pm_suspend.o: include/generated/at91_pm_data-offsets.h
+$(obj)/pm_suspend.o: $(obj)/pm_data-offsets.h
 
 targets += pm_data-offsets.s
+clean-files += pm_data-offsets.h
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index c751f047b1166..ed57c879d4e17 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -10,7 +10,7 @@
 #include <linux/linkage.h>
 #include <linux/clk/at91_pmc.h>
 #include "pm.h"
-#include "generated/at91_pm_data-offsets.h"
+#include "pm_data-offsets.h"
 
 #define	SRAMC_SELF_FRESH_ACTIVE		0x01
 #define	SRAMC_SELF_FRESH_EXIT		0x00
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 106/185] soc: renesas: rmobile-sysc: Set GENPD_FLAG_ALWAYS_ON for always-on domain
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (103 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 105/185] ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 107/185] soc: renesas: Enable ARM_ERRATA_754322 for affected Cortex-A9 Sasha Levin
                   ` (78 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Geert Uytterhoeven, Simon Horman, Ulf Hansson, Sasha Levin,
	linux-renesas-soc

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit af0bc634728c0bc6a3f66f911f227d5c6396db88 ]

Currently the R-Mobile "always-on" PM Domain is implemented by returning
-EBUSY from the generic_pm_domain.power_off() callback, and doing
nothing in the generic_pm_domain.power_on() callback.  However, this
means the PM Domain core code is not aware of the semantics of this
special domain, leading to boot warnings like the following on
SH/R-Mobile SoCs:

    sh_cmt e6130000.timer: PM domain c5 will not be powered off

Fix this by making the always-on nature of the domain explicit instead,
by setting the GENPD_FLAG_ALWAYS_ON flag.  This removes the need for the
domain to provide power control callbacks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/renesas/rmobile-sysc.c | 31 +++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/soc/renesas/rmobile-sysc.c b/drivers/soc/renesas/rmobile-sysc.c
index 421ae1c887d82..54b616ad4a62a 100644
--- a/drivers/soc/renesas/rmobile-sysc.c
+++ b/drivers/soc/renesas/rmobile-sysc.c
@@ -48,12 +48,8 @@ struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d)
 static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
 {
 	struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd);
-	unsigned int mask;
+	unsigned int mask = BIT(rmobile_pd->bit_shift);
 
-	if (rmobile_pd->bit_shift == ~0)
-		return -EBUSY;
-
-	mask = BIT(rmobile_pd->bit_shift);
 	if (rmobile_pd->suspend) {
 		int ret = rmobile_pd->suspend();
 
@@ -80,14 +76,10 @@ static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
 
 static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd)
 {
-	unsigned int mask;
+	unsigned int mask = BIT(rmobile_pd->bit_shift);
 	unsigned int retry_count;
 	int ret = 0;
 
-	if (rmobile_pd->bit_shift == ~0)
-		return 0;
-
-	mask = BIT(rmobile_pd->bit_shift);
 	if (__raw_readl(rmobile_pd->base + PSTR) & mask)
 		return ret;
 
@@ -122,11 +114,15 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
 	struct dev_power_governor *gov = rmobile_pd->gov;
 
 	genpd->flags |= GENPD_FLAG_PM_CLK | GENPD_FLAG_ACTIVE_WAKEUP;
-	genpd->power_off		= rmobile_pd_power_down;
-	genpd->power_on			= rmobile_pd_power_up;
-	genpd->attach_dev		= cpg_mstp_attach_dev;
-	genpd->detach_dev		= cpg_mstp_detach_dev;
-	__rmobile_pd_power_up(rmobile_pd);
+	genpd->attach_dev = cpg_mstp_attach_dev;
+	genpd->detach_dev = cpg_mstp_detach_dev;
+
+	if (!(genpd->flags & GENPD_FLAG_ALWAYS_ON)) {
+		genpd->power_off = rmobile_pd_power_down;
+		genpd->power_on = rmobile_pd_power_up;
+		__rmobile_pd_power_up(rmobile_pd);
+	}
+
 	pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
 }
 
@@ -270,6 +266,11 @@ static void __init rmobile_setup_pm_domain(struct device_node *np,
 		break;
 
 	case PD_NORMAL:
+		if (pd->bit_shift == ~0) {
+			/* Top-level always-on domain */
+			pr_debug("PM domain %s is always-on domain\n", name);
+			pd->genpd.flags |= GENPD_FLAG_ALWAYS_ON;
+		}
 		break;
 	}
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 107/185] soc: renesas: Enable ARM_ERRATA_754322 for affected Cortex-A9
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (104 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 106/185] soc: renesas: rmobile-sysc: Set GENPD_FLAG_ALWAYS_ON for always-on domain Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 108/185] PM / devfreq: Fix kernel oops on governor module load Sasha Levin
                   ` (77 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Geert Uytterhoeven, Simon Horman, Sasha Levin, linux-renesas-soc

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 2eced4607a1e6f51f928ae3e521fe02be5cb7d23 ]

ARM Erratum 754322 affects Cortex-A9 revisions r2p* and r3p*.

Automatically enable support code to mitigate the erratum when compiling
a kernel for any of the affected Renesas SoCs:
  - RZ/A1: r3p0,
  - R-Mobile A1: r2p4,
  - R-Car M1A: r2p2-00rel0,
  - R-Car H1: r3p0,
  - SH-Mobile AG5: r2p2.

EMMA Mobile EV2 (r1p3) and RZ/A2 (r4p1) are not affected.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/renesas/Kconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 68bfca6f20ddf..2040caa6c8085 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -55,6 +55,7 @@ config ARCH_EMEV2
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
+	select ARM_ERRATA_754322
 	select PM
 	select PM_GENERIC_DOMAINS
 	select SYS_SUPPORTS_SH_MTU2
@@ -76,6 +77,7 @@ config ARCH_R8A73A4
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
 	select ARCH_RMOBILE
+	select ARM_ERRATA_754322
 	select RENESAS_INTC_IRQPIN
 
 config ARCH_R8A7743
@@ -103,10 +105,12 @@ config ARCH_R8A77470
 config ARCH_R8A7778
 	bool "R-Car M1A (R8A77781)"
 	select ARCH_RCAR_GEN1
+	select ARM_ERRATA_754322
 
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
 	select ARCH_RCAR_GEN1
+	select ARM_ERRATA_754322
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select SYSC_R8A7779
@@ -150,6 +154,7 @@ config ARCH_R9A06G032
 config ARCH_SH73A0
 	bool "SH-Mobile AG5 (R8A73A00)"
 	select ARCH_RMOBILE
+	select ARM_ERRATA_754322
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select RENESAS_INTC_IRQPIN
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 108/185] PM / devfreq: Fix kernel oops on governor module load
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (105 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 107/185] soc: renesas: Enable ARM_ERRATA_754322 for affected Cortex-A9 Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 109/185] ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 Sasha Levin
                   ` (76 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ezequiel Garcia, Chanwoo Choi, MyungJoo Ham, Sasha Levin, linux-pm

From: Ezequiel Garcia <ezequiel@collabora.com>

[ Upstream commit 7544fd7f384591038646d3cd9efb311ab4509e24 ]

A bit unexpectedly (but still documented), request_module may
return a positive value, in case of a modprobe error.
This is currently causing issues in the devfreq framework.

When a request_module exits with a positive value, we currently
return that via ERR_PTR. However, because the value is positive,
it's not a ERR_VALUE proper, and is therefore treated as a
valid struct devfreq_governor pointer, leading to a kernel oops.

Fix this by returning -EINVAL if request_module returns a positive
value.

Fixes: b53b0128052ff ("PM / devfreq: Fix static checker warning in try_then_request_governor")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/devfreq/devfreq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index ab22bf8a12d69..a0e19802149fc 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -254,7 +254,7 @@ static struct devfreq_governor *try_then_request_governor(const char *name)
 		/* Restore previous state before return */
 		mutex_lock(&devfreq_list_lock);
 		if (err)
-			return ERR_PTR(err);
+			return (err < 0) ? ERR_PTR(err) : ERR_PTR(-EINVAL);
 
 		governor = find_devfreq_governor(name);
 	}
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 109/185] ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (106 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 108/185] PM / devfreq: Fix kernel oops on governor module load Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 110/185] PM / devfreq: passive: Use non-devm notifiers Sasha Levin
                   ` (75 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Masahiro Yamada, Keerthy, Tony Lindgren, Sasha Levin, linux-omap

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit ccf4975dca233b1d6a74752d6ab35c239edc0d58 ]

<generated/ti-pm-asm-offsets.h> is only generated and included by
arch/arm/mach-omap2/, so it does not need to reside in the globally
visible include/generated/.

I renamed it to arch/arm/mach-omap2/pm-asm-offsets.h since the prefix
'ti-' is just redundant in mach-omap2/.

My main motivation of this change is to avoid the race condition for
the parallel build (-j) when CONFIG_IKHEADERS is enabled.

When it is enabled, all the headers under include/ are archived into
kernel/kheaders_data.tar.xz and exposed in the sysfs.

In the parallel build, we have no idea in which order files are built.

 - If ti-pm-asm-offsets.h is built before kheaders_data.tar.xz,
   the header will be included in the archive. Probably nobody will
   use it, but it is harmless except that it will increase the archive
   size needlessly.

 - If kheaders_data.tar.xz is built before ti-pm-asm-offsets.h,
   the header will not be included in the archive. However, in the next
   build, the archive will be re-generated to include the newly-found
   ti-pm-asm-offsets.h. This is not nice from the build system point
   of view.

 - If ti-pm-asm-offsets.h and kheaders_data.tar.xz are built at the
   same time, the corrupted header might be included in the archive,
   which does not look nice either.

This commit fixes the race.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/.gitignore  | 1 +
 arch/arm/mach-omap2/Makefile    | 5 +++--
 arch/arm/mach-omap2/sleep33xx.S | 2 +-
 arch/arm/mach-omap2/sleep43xx.S | 2 +-
 4 files changed, 6 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/mach-omap2/.gitignore

diff --git a/arch/arm/mach-omap2/.gitignore b/arch/arm/mach-omap2/.gitignore
new file mode 100644
index 0000000000000..79a8d6ea71520
--- /dev/null
+++ b/arch/arm/mach-omap2/.gitignore
@@ -0,0 +1 @@
+pm-asm-offsets.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 85d1b13c9215b..26baeb6477aff 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -236,9 +236,10 @@ obj-y					+= omap_phy_internal.o
 
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 
-include/generated/ti-pm-asm-offsets.h: arch/arm/mach-omap2/pm-asm-offsets.s FORCE
+$(obj)/pm-asm-offsets.h: $(obj)/pm-asm-offsets.s FORCE
 	$(call filechk,offsets,__TI_PM_ASM_OFFSETS_H__)
 
-$(obj)/sleep33xx.o $(obj)/sleep43xx.o: include/generated/ti-pm-asm-offsets.h
+$(obj)/sleep33xx.o $(obj)/sleep43xx.o: $(obj)/pm-asm-offsets.h
 
 targets += pm-asm-offsets.s
+clean-files += pm-asm-offsets.h
diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S
index 47a816468cdb4..a003769121aaa 100644
--- a/arch/arm/mach-omap2/sleep33xx.S
+++ b/arch/arm/mach-omap2/sleep33xx.S
@@ -6,7 +6,6 @@
  *	Dave Gerlach, Vaibhav Bedia
  */
 
-#include <generated/ti-pm-asm-offsets.h>
 #include <linux/linkage.h>
 #include <linux/platform_data/pm33xx.h>
 #include <linux/ti-emif-sram.h>
@@ -15,6 +14,7 @@
 
 #include "iomap.h"
 #include "cm33xx.h"
+#include "pm-asm-offsets.h"
 
 #define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED			0x00030000
 #define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE			0x0003
diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S
index 0c1031442571f..27b13d47cf193 100644
--- a/arch/arm/mach-omap2/sleep43xx.S
+++ b/arch/arm/mach-omap2/sleep43xx.S
@@ -6,7 +6,6 @@
  *	Dave Gerlach, Vaibhav Bedia
  */
 
-#include <generated/ti-pm-asm-offsets.h>
 #include <linux/linkage.h>
 #include <linux/ti-emif-sram.h>
 #include <linux/platform_data/pm33xx.h>
@@ -19,6 +18,7 @@
 #include "iomap.h"
 #include "omap-secure.h"
 #include "omap44xx.h"
+#include "pm-asm-offsets.h"
 #include "prm33xx.h"
 #include "prcm43xx.h"
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 110/185] PM / devfreq: passive: Use non-devm notifiers
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (107 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 109/185] ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 111/185] PM / devfreq: exynos-bus: Correct clock enable sequence Sasha Levin
                   ` (74 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Leonard Crestez, Chanwoo Choi, MyungJoo Ham, Sasha Levin, linux-pm

From: Leonard Crestez <leonard.crestez@nxp.com>

[ Upstream commit 0ef7c7cce43f6ecc2b96d447e69b2900a9655f7c ]

The devfreq passive governor registers and unregisters devfreq
transition notifiers on DEVFREQ_GOV_START/GOV_STOP using devm wrappers.

If devfreq itself is registered with devm then a warning is triggered on
rmmod from devm_devfreq_unregister_notifier. Call stack looks like this:

	devm_devfreq_unregister_notifier+0x30/0x40
	devfreq_passive_event_handler+0x4c/0x88
	devfreq_remove_device.part.8+0x6c/0x9c
	devm_devfreq_dev_release+0x18/0x20
	release_nodes+0x1b0/0x220
	devres_release_all+0x78/0x84
	device_release_driver_internal+0x100/0x1c0
	driver_detach+0x4c/0x90
	bus_remove_driver+0x7c/0xd0
	driver_unregister+0x2c/0x58
	platform_driver_unregister+0x10/0x18
	imx_devfreq_platdrv_exit+0x14/0xd40 [imx_devfreq]

This happens because devres_release_all will first remove all the nodes
into a separate todo list so the nested devres_release from
devm_devfreq_unregister_notifier won't find anything.

Fix the warning by calling the non-devm APIS for frequency notification.
Using devm wrappers is not actually useful for a governor anyway: it
relies on the devfreq core to correctly match the GOV_START/GOV_STOP
notifications.

Fixes: 996133119f57 ("PM / devfreq: Add new passive governor")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/devfreq/governor_passive.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
index 58308948b8637..da485477065c5 100644
--- a/drivers/devfreq/governor_passive.c
+++ b/drivers/devfreq/governor_passive.c
@@ -165,12 +165,12 @@ static int devfreq_passive_event_handler(struct devfreq *devfreq,
 			p_data->this = devfreq;
 
 		nb->notifier_call = devfreq_passive_notifier_call;
-		ret = devm_devfreq_register_notifier(dev, parent, nb,
+		ret = devfreq_register_notifier(parent, nb,
 					DEVFREQ_TRANSITION_NOTIFIER);
 		break;
 	case DEVFREQ_GOV_STOP:
-		devm_devfreq_unregister_notifier(dev, parent, nb,
-					DEVFREQ_TRANSITION_NOTIFIER);
+		WARN_ON(devfreq_unregister_notifier(parent, nb,
+					DEVFREQ_TRANSITION_NOTIFIER));
 		break;
 	default:
 		break;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 111/185] PM / devfreq: exynos-bus: Correct clock enable sequence
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (108 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 110/185] PM / devfreq: passive: Use non-devm notifiers Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 112/185] media: cec-notifier: clear cec_adap in cec_notifier_unregister Sasha Levin
                   ` (73 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Kamil Konieczny, Chanwoo Choi, MyungJoo Ham, Sasha Levin,
	linux-pm, linux-samsung-soc

From: Kamil Konieczny <k.konieczny@partner.samsung.com>

[ Upstream commit 2c2b20e0da89c76759ee28c6824413ab2fa3bfc6 ]

Regulators should be enabled before clocks to avoid h/w hang. This
require change in exynos_bus_probe() to move exynos_bus_parse_of()
after exynos_bus_parent_parse_of() and change in error handling.
Similar change is needed in exynos_bus_exit() where clock should be
disabled before regulators.

Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/devfreq/exynos-bus.c | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index d9f377912c104..7c06df8bd74fe 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -191,11 +191,10 @@ static void exynos_bus_exit(struct device *dev)
 	if (ret < 0)
 		dev_warn(dev, "failed to disable the devfreq-event devices\n");
 
-	if (bus->regulator)
-		regulator_disable(bus->regulator);
-
 	dev_pm_opp_of_remove_table(dev);
 	clk_disable_unprepare(bus->clk);
+	if (bus->regulator)
+		regulator_disable(bus->regulator);
 }
 
 /*
@@ -383,6 +382,7 @@ static int exynos_bus_probe(struct platform_device *pdev)
 	struct exynos_bus *bus;
 	int ret, max_state;
 	unsigned long min_freq, max_freq;
+	bool passive = false;
 
 	if (!np) {
 		dev_err(dev, "failed to find devicetree node\n");
@@ -396,27 +396,27 @@ static int exynos_bus_probe(struct platform_device *pdev)
 	bus->dev = &pdev->dev;
 	platform_set_drvdata(pdev, bus);
 
-	/* Parse the device-tree to get the resource information */
-	ret = exynos_bus_parse_of(np, bus);
-	if (ret < 0)
-		return ret;
-
 	profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
-	if (!profile) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	if (!profile)
+		return -ENOMEM;
 
 	node = of_parse_phandle(dev->of_node, "devfreq", 0);
 	if (node) {
 		of_node_put(node);
-		goto passive;
+		passive = true;
 	} else {
 		ret = exynos_bus_parent_parse_of(np, bus);
+		if (ret < 0)
+			return ret;
 	}
 
+	/* Parse the device-tree to get the resource information */
+	ret = exynos_bus_parse_of(np, bus);
 	if (ret < 0)
-		goto err;
+		goto err_reg;
+
+	if (passive)
+		goto passive;
 
 	/* Initialize the struct profile and governor data for parent device */
 	profile->polling_ms = 50;
@@ -507,6 +507,9 @@ static int exynos_bus_probe(struct platform_device *pdev)
 err:
 	dev_pm_opp_of_remove_table(dev);
 	clk_disable_unprepare(bus->clk);
+err_reg:
+	if (!passive)
+		regulator_disable(bus->regulator);
 
 	return ret;
 }
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 112/185] media: cec-notifier: clear cec_adap in cec_notifier_unregister
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (109 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 111/185] PM / devfreq: exynos-bus: Correct clock enable sequence Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 113/185] media: saa7146: add cleanup in hexium_attach() Sasha Levin
                   ` (72 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin, linux-media

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 14d5511691e5290103bc480998bc322e68f139d4 ]

If cec_notifier_cec_adap_unregister() is called before
cec_unregister_adapter() then everything is OK (and this is the
case today). But if it is the other way around, then
cec_notifier_unregister() is called first, and that doesn't
set n->cec_adap to NULL.

So if e.g. cec_notifier_set_phys_addr() is called after
cec_notifier_unregister() but before cec_unregister_adapter()
then n->cec_adap points to an unregistered and likely deleted
cec adapter. So just set n->cec_adap->notifier and n->cec_adap
to NULL for rubustness.

Eventually cec_notifier_unregister will disappear and this will
be simplified substantially.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/cec/cec-notifier.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/cec/cec-notifier.c b/drivers/media/cec/cec-notifier.c
index 9598c7778871a..c4aa27e0c4308 100644
--- a/drivers/media/cec/cec-notifier.c
+++ b/drivers/media/cec/cec-notifier.c
@@ -124,6 +124,8 @@ void cec_notifier_unregister(struct cec_notifier *n)
 {
 	mutex_lock(&n->lock);
 	n->callback = NULL;
+	n->cec_adap->notifier = NULL;
+	n->cec_adap = NULL;
 	mutex_unlock(&n->lock);
 	cec_notifier_put(n);
 }
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 113/185] media: saa7146: add cleanup in hexium_attach()
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (110 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 112/185] media: cec-notifier: clear cec_adap in cec_notifier_unregister Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 114/185] media: cpia2_usb: fix memory leaks Sasha Levin
                   ` (71 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Wenwen Wang, Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin,
	linux-media

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit 42e64117d3b4a759013f77bbcf25ab6700e55de7 ]

If saa7146_register_device() fails, no cleanup is executed, leading to
memory/resource leaks. To fix this issue, perform necessary cleanup work
before returning the error.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/saa7146/hexium_gemini.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/pci/saa7146/hexium_gemini.c b/drivers/media/pci/saa7146/hexium_gemini.c
index dca20a3d98e25..f962269306707 100644
--- a/drivers/media/pci/saa7146/hexium_gemini.c
+++ b/drivers/media/pci/saa7146/hexium_gemini.c
@@ -292,6 +292,9 @@ static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_d
 	ret = saa7146_register_device(&hexium->video_dev, dev, "hexium gemini", VFL_TYPE_GRABBER);
 	if (ret < 0) {
 		pr_err("cannot register capture v4l2 device. skipping.\n");
+		saa7146_vv_release(dev);
+		i2c_del_adapter(&hexium->i2c_adapter);
+		kfree(hexium);
 		return ret;
 	}
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 114/185] media: cpia2_usb: fix memory leaks
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (111 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 113/185] media: saa7146: add cleanup in hexium_attach() Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 115/185] media: saa7134: fix terminology around saa7134_i2c_eeprom_md7134_gate() Sasha Levin
                   ` (70 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Wenwen Wang, Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin,
	linux-media

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit 1c770f0f52dca1a2323c594f01f5ec6f1dddc97f ]

In submit_urbs(), 'cam->sbuf[i].data' is allocated through kmalloc_array().
However, it is not deallocated if the following allocation for urbs fails.
To fix this issue, free 'cam->sbuf[i].data' if usb_alloc_urb() fails.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/cpia2/cpia2_usb.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c
index 17468f7d78ed2..3ab80a7b44985 100644
--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -676,6 +676,10 @@ static int submit_urbs(struct camera_data *cam)
 		if (!urb) {
 			for (j = 0; j < i; j++)
 				usb_free_urb(cam->sbuf[j].urb);
+			for (j = 0; j < NUM_SBUF; j++) {
+				kfree(cam->sbuf[j].data);
+				cam->sbuf[j].data = NULL;
+			}
 			return -ENOMEM;
 		}
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 115/185] media: saa7134: fix terminology around saa7134_i2c_eeprom_md7134_gate()
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (112 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 114/185] media: cpia2_usb: fix memory leaks Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 116/185] perf trace beauty ioctl: Fix off-by-one error in cmd->string table Sasha Levin
                   ` (69 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Maciej S. Szmigiero, Hans Verkuil, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>

[ Upstream commit 9d802222a3405599d6e1984d9324cddf592ea1f4 ]

saa7134_i2c_eeprom_md7134_gate() function and the associated comment uses
an inverted i2c gate open / closed terminology.
Let's fix this.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix alignment checkpatch warning]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/saa7134/saa7134-i2c.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/media/pci/saa7134/saa7134-i2c.c b/drivers/media/pci/saa7134/saa7134-i2c.c
index 493b1858815fb..04e85765373ec 100644
--- a/drivers/media/pci/saa7134/saa7134-i2c.c
+++ b/drivers/media/pci/saa7134/saa7134-i2c.c
@@ -342,7 +342,11 @@ static const struct i2c_client saa7134_client_template = {
 
 /* ----------------------------------------------------------- */
 
-/* On Medion 7134 reading EEPROM needs DVB-T demod i2c gate open */
+/*
+ * On Medion 7134 reading the SAA7134 chip config EEPROM needs DVB-T
+ * demod i2c gate closed due to an address clash between this EEPROM
+ * and the demod one.
+ */
 static void saa7134_i2c_eeprom_md7134_gate(struct saa7134_dev *dev)
 {
 	u8 subaddr = 0x7, dmdregval;
@@ -359,14 +363,14 @@ static void saa7134_i2c_eeprom_md7134_gate(struct saa7134_dev *dev)
 
 	ret = i2c_transfer(&dev->i2c_adap, i2cgatemsg_r, 2);
 	if ((ret == 2) && (dmdregval & 0x2)) {
-		pr_debug("%s: DVB-T demod i2c gate was left closed\n",
+		pr_debug("%s: DVB-T demod i2c gate was left open\n",
 			 dev->name);
 
 		data[0] = subaddr;
 		data[1] = (dmdregval & ~0x2);
 		if (i2c_transfer(&dev->i2c_adap, i2cgatemsg_w, 1) != 1)
-			pr_err("%s: EEPROM i2c gate open failure\n",
-			  dev->name);
+			pr_err("%s: EEPROM i2c gate close failure\n",
+			       dev->name);
 	}
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 116/185] perf trace beauty ioctl: Fix off-by-one error in cmd->string table
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (113 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 115/185] media: saa7134: fix terminology around saa7134_i2c_eeprom_md7134_gate() Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 117/185] perf report: Fix --ns time sort key output Sasha Levin
                   ` (68 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Benjamin Peterson, Arnaldo Carvalho de Melo, Alexander Shishkin,
	Jiri Olsa, Namhyung Kim, Peter Zijlstra, Sasha Levin

From: Benjamin Peterson <benjamin@python.org>

[ Upstream commit b92675f4a9c02dd78052645597dac9e270679ddf ]

While tracing a program that calls isatty(3), I noticed that strace
reported TCGETS for the request argument of the underlying ioctl(2)
syscall while perf trace reported TCSETS. strace is corrrect. The bug in
perf was due to the tty ioctl beauty table starting at 0x5400 rather
than 0x5401.

Committer testing:

  Using augmented_raw_syscalls.o and settings to make 'perf trace'
  use strace formatting, i.e. with this in ~/.perfconfig

  # cat ~/.perfconfig
  [trace]
	add_events = /home/acme/git/linux/tools/perf/examples/bpf/augmented_raw_syscalls.c
	show_zeros = yes
	show_duration = no
	no_inherit = yes
	show_timestamp = no
	show_arg_names = no
	args_alignment = 40
	show_prefix = yes

  # strace -e ioctl stty > /dev/null
  ioctl(0, TCGETS, {B38400 opost isig icanon echo ...}) = 0
  ioctl(1, TIOCGWINSZ, 0x7fff8a9b0860)    = -1 ENOTTY (Inappropriate ioctl for device)
  ioctl(1, TCGETS, 0x7fff8a9b0540)        = -1 ENOTTY (Inappropriate ioctl for device)
  +++ exited with 0 +++
  #

Before:

  # perf trace -e ioctl stty > /dev/null
  ioctl(0, TCSETS, 0x7fff2cf79f20)        = 0
  ioctl(1, TIOCSWINSZ, 0x7fff2cf79f40)    = -1 ENOTTY (Inappropriate ioctl for device)
  ioctl(1, TCSETS, 0x7fff2cf79c20)        = -1 ENOTTY (Inappropriate ioctl for device)
  #

After:

  # perf trace -e ioctl stty > /dev/null
  ioctl(0, TCGETS, 0x7ffed0763920)        = 0
  ioctl(1, TIOCGWINSZ, 0x7ffed0763940)    = -1 ENOTTY (Inappropriate ioctl for device)
  ioctl(1, TCGETS, 0x7ffed0763620)        = -1 ENOTTY (Inappropriate ioctl for device)
  #

Signed-off-by: Benjamin Peterson <benjamin@python.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 1cc47f2d46206d67285aea0ca7e8450af571da13 ("perf trace beauty ioctl: Improve 'cmd' beautifier")
Link: http://lkml.kernel.org/r/20190823033625.18814-1-benjamin@python.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/trace/beauty/ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/trace/beauty/ioctl.c b/tools/perf/trace/beauty/ioctl.c
index 52242fa4072b0..e19eb6ea361d7 100644
--- a/tools/perf/trace/beauty/ioctl.c
+++ b/tools/perf/trace/beauty/ioctl.c
@@ -21,7 +21,7 @@
 static size_t ioctl__scnprintf_tty_cmd(int nr, int dir, char *bf, size_t size)
 {
 	static const char *ioctl_tty_cmd[] = {
-	"TCGETS", "TCSETS", "TCSETSW", "TCSETSF", "TCGETA", "TCSETA", "TCSETAW",
+	[_IOC_NR(TCGETS)] = "TCGETS", "TCSETS", "TCSETSW", "TCSETSF", "TCGETA", "TCSETA", "TCSETAW",
 	"TCSETAF", "TCSBRK", "TCXONC", "TCFLSH", "TIOCEXCL", "TIOCNXCL", "TIOCSCTTY",
 	"TIOCGPGRP", "TIOCSPGRP", "TIOCOUTQ", "TIOCSTI", "TIOCGWINSZ", "TIOCSWINSZ",
 	"TIOCMGET", "TIOCMBIS", "TIOCMBIC", "TIOCMSET", "TIOCGSOFTCAR", "TIOCSSOFTCAR",
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 117/185] perf report: Fix --ns time sort key output
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (114 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 116/185] perf trace beauty ioctl: Fix off-by-one error in cmd->string table Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 118/185] perf script: Fix memory leaks in list_scripts() Sasha Levin
                   ` (67 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Andi Kleen, Arnaldo Carvalho de Melo, Jiri Olsa, Sasha Levin

From: Andi Kleen <ak@linux.intel.com>

[ Upstream commit 3dab6ac080dcd7f71cb9ceb84ad7dafecd6f7c07 ]

If the user specified --ns, the column to print the sort time stamp
wasn't wide enough to actually print the full nanoseconds.

Widen the time key column width when --ns is specified.

Before:

  % perf record -a sleep 1
  % perf report --sort time,overhead,symbol --stdio --ns
  ...
       2.39%  187851.10000  [k] smp_call_function_single   -      -
       1.53%  187851.10000  [k] intel_idle                 -      -
       0.59%  187851.10000  [.] __wcscmp_ifunc             -      -
       0.33%  187851.10000  [.] 0000000000000000           -      -
       0.28%  187851.10000  [k] cpuidle_enter_state        -      -

After:

  % perf report --sort time,overhead,symbol --stdio --ns
  ...
       2.39%  187851.100000000  [k] smp_call_function_single   -      -
       1.53%  187851.100000000  [k] intel_idle                 -      -
       0.59%  187851.100000000  [.] __wcscmp_ifunc             -      -
       0.33%  187851.100000000  [.] 0000000000000000           -      -
       0.28%  187851.100000000  [k] cpuidle_enter_state        -      -

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190823210338.12360-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/hist.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 7ace7a10054d8..966c248d6a3a1 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -193,7 +193,10 @@ void hists__calc_col_len(struct hists *hists, struct hist_entry *h)
 	hists__new_col_len(hists, HISTC_MEM_LVL, 21 + 3);
 	hists__new_col_len(hists, HISTC_LOCAL_WEIGHT, 12);
 	hists__new_col_len(hists, HISTC_GLOBAL_WEIGHT, 12);
-	hists__new_col_len(hists, HISTC_TIME, 12);
+	if (symbol_conf.nanosecs)
+		hists__new_col_len(hists, HISTC_TIME, 16);
+	else
+		hists__new_col_len(hists, HISTC_TIME, 12);
 
 	if (h->srcline) {
 		len = MAX(strlen(h->srcline), strlen(sort_srcline.se_header));
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 118/185] perf script: Fix memory leaks in list_scripts()
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (115 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 117/185] perf report: Fix --ns time sort key output Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 119/185] media: aspeed-video: address a protential usage of an unitialized var Sasha Levin
                   ` (66 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Gustavo A. R. Silva, Alexander Shishkin, Andi Kleen, Jiri Olsa,
	Namhyung Kim, Peter Zijlstra, Arnaldo Carvalho de Melo,
	Sasha Levin

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit 3b4acbb92dbda4829e021e5c6d5410658849fa1c ]

In case memory resources for *buf* and *paths* were allocated, jump to
*out* and release them before return.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Addresses-Coverity-ID: 1444328 ("Resource leak")
Fixes: 6f3da20e151f ("perf report: Support builtin perf script in scripts menu")
Link: http://lkml.kernel.org/r/20190408162748.GA21008@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/ui/browsers/scripts.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/tools/perf/ui/browsers/scripts.c b/tools/perf/ui/browsers/scripts.c
index 27cf3ab88d13f..f4edb18f67ec9 100644
--- a/tools/perf/ui/browsers/scripts.c
+++ b/tools/perf/ui/browsers/scripts.c
@@ -131,8 +131,10 @@ static int list_scripts(char *script_name, bool *custom,
 		int key = ui_browser__input_window("perf script command",
 				"Enter perf script command line (without perf script prefix)",
 				script_args, "", 0);
-		if (key != K_ENTER)
-			return -1;
+		if (key != K_ENTER) {
+			ret = -1;
+			goto out;
+		}
 		sprintf(script_name, "%s script %s", perf, script_args);
 	} else if (choice < num + max_std) {
 		strcpy(script_name, paths[choice]);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 119/185] media: aspeed-video: address a protential usage of an unitialized var
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (116 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 118/185] perf script: Fix memory leaks in list_scripts() Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 120/185] media: ov9650: add a sanity check Sasha Levin
                   ` (65 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Mauro Carvalho Chehab, Eddie James, Sasha Levin, linux-media

From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

[ Upstream commit 31b8b0bd6e55c3ea5a08bb8141fa5d3c90600e3b ]

While this might not occur in practice, if the device is doing
the right thing, it would be teoretically be possible to have
both hsync_counter and vsync_counter negatives.

If this ever happen, ctrl will be undefined, but the driver
will still call:

	aspeed_video_update(video, VE_CTRL, 0, ctrl);

Change the code to prevent this to happen.

This was warned by cppcheck:

	[drivers/media/platform/aspeed-video.c:653]: (error) Uninitialized variable: ctrl

Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/aspeed-video.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index de0f192afa8b1..388c32a11345d 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -632,7 +632,7 @@ static void aspeed_video_check_and_set_polarity(struct aspeed_video *video)
 	}
 
 	if (hsync_counter < 0 || vsync_counter < 0) {
-		u32 ctrl;
+		u32 ctrl = 0;
 
 		if (hsync_counter < 0) {
 			ctrl = VE_CTRL_HSYNC_POL;
@@ -652,7 +652,8 @@ static void aspeed_video_check_and_set_polarity(struct aspeed_video *video)
 				V4L2_DV_VSYNC_POS_POL;
 		}
 
-		aspeed_video_update(video, VE_CTRL, 0, ctrl);
+		if (ctrl)
+			aspeed_video_update(video, VE_CTRL, 0, ctrl);
 	}
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 120/185] media: ov9650: add a sanity check
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (117 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 119/185] media: aspeed-video: address a protential usage of an unitialized var Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 121/185] leds: lm3532: Fixes for the driver for stability Sasha Levin
                   ` (64 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Mauro Carvalho Chehab, Sylwester Nawrocki, Sasha Levin, linux-media

From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

[ Upstream commit 093347abc7a4e0490e3c962ecbde2dc272a8f708 ]

As pointed by cppcheck:

	[drivers/media/i2c/ov9650.c:706]: (error) Shifting by a negative value is undefined behaviour
	[drivers/media/i2c/ov9650.c:707]: (error) Shifting by a negative value is undefined behaviour
	[drivers/media/i2c/ov9650.c:721]: (error) Shifting by a negative value is undefined behaviour

Prevent mangling with gains with invalid values.

As pointed by Sylvester, this should never happen in practice,
as min value of V4L2_CID_GAIN control is 16 (gain is always >= 16
and m is always >= 0), but it is too hard for a static analyzer
to get this, as the logic with validates control min/max is
elsewhere inside V4L2 core.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov9650.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/i2c/ov9650.c b/drivers/media/i2c/ov9650.c
index 30ab2225fbd0c..b350f5c1a9890 100644
--- a/drivers/media/i2c/ov9650.c
+++ b/drivers/media/i2c/ov9650.c
@@ -703,6 +703,11 @@ static int ov965x_set_gain(struct ov965x *ov965x, int auto_gain)
 		for (m = 6; m >= 0; m--)
 			if (gain >= (1 << m) * 16)
 				break;
+
+		/* Sanity check: don't adjust the gain with a negative value */
+		if (m < 0)
+			return -EINVAL;
+
 		rgain = (gain - ((1 << m) * 16)) / (1 << m);
 		rgain |= (((1 << m) - 1) << 4);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 121/185] leds: lm3532: Fixes for the driver for stability
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (118 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 120/185] media: ov9650: add a sanity check Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-10-02 19:16   ` Pavel Machek
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 122/185] ASoC: es8316: fix headphone mixer volume table Sasha Levin
                   ` (63 subsequent siblings)
  183 siblings, 1 reply; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Dan Murphy, Pavel Machek, Jacek Anaszewski, Sasha Levin, linux-leds

From: Dan Murphy <dmurphy@ti.com>

[ Upstream commit 6559ac32998248182572e1ccae79dc2eb40ac7c6 ]

Fixed misspelled words, added error check during probe
on the init of the registers, and fixed ALS/I2C control
mode.

Fixes: bc1b8492c764 ("leds: lm3532: Introduce the lm3532 LED driver")
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/leds-lm3532.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
index 180895b83b888..e55a64847fe2f 100644
--- a/drivers/leds/leds-lm3532.c
+++ b/drivers/leds/leds-lm3532.c
@@ -40,7 +40,7 @@
 #define LM3532_REG_ZN_3_LO	0x67
 #define LM3532_REG_MAX		0x7e
 
-/* Contorl Enable */
+/* Control Enable */
 #define LM3532_CTRL_A_ENABLE	BIT(0)
 #define LM3532_CTRL_B_ENABLE	BIT(1)
 #define LM3532_CTRL_C_ENABLE	BIT(2)
@@ -302,7 +302,7 @@ static int lm3532_led_disable(struct lm3532_led *led_data)
 	int ret;
 
 	ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE,
-					 ctrl_en_val, ~ctrl_en_val);
+					 ctrl_en_val, 0);
 	if (ret) {
 		dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret);
 		return ret;
@@ -321,7 +321,7 @@ static int lm3532_brightness_set(struct led_classdev *led_cdev,
 
 	mutex_lock(&led->priv->lock);
 
-	if (led->mode == LM3532_BL_MODE_ALS) {
+	if (led->mode == LM3532_ALS_CTRL) {
 		if (brt_val > LED_OFF)
 			ret = lm3532_led_enable(led);
 		else
@@ -542,11 +542,14 @@ static int lm3532_parse_node(struct lm3532_data *priv)
 		}
 
 		if (led->mode == LM3532_BL_MODE_ALS) {
+			led->mode = LM3532_ALS_CTRL;
 			ret = lm3532_parse_als(priv);
 			if (ret)
 				dev_err(&priv->client->dev, "Failed to parse als\n");
 			else
 				lm3532_als_configure(priv, led);
+		} else {
+			led->mode = LM3532_I2C_CTRL;
 		}
 
 		led->num_leds = fwnode_property_read_u32_array(child,
@@ -590,7 +593,13 @@ static int lm3532_parse_node(struct lm3532_data *priv)
 			goto child_out;
 		}
 
-		lm3532_init_registers(led);
+		ret = lm3532_init_registers(led);
+		if (ret) {
+			dev_err(&priv->client->dev, "register init err: %d\n",
+				ret);
+			fwnode_handle_put(child);
+			goto child_out;
+		}
 
 		i++;
 	}
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 122/185] ASoC: es8316: fix headphone mixer volume table
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (119 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 121/185] leds: lm3532: Fixes for the driver for stability Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 123/185] ACPI / CPPC: do not require the _PSD method Sasha Levin
                   ` (62 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Katsuhiro Suzuki, Daniel Drake, Mark Brown, Sasha Levin

From: Katsuhiro Suzuki <katsuhiro@katsuster.net>

[ Upstream commit f972d02fee2496024cfd6f59021c9d89d54922a6 ]

This patch fix setting table of Headphone mixer volume.
Current code uses 4 ... 7 values but these values are prohibited.

Correct settings are the following:
  0000 -12dB
  0001 -10.5dB
  0010 -9dB
  0011 -7.5dB
  0100 -6dB
  1000 -4.5dB
  1001 -3dB
  1010 -1.5dB
  1011 0dB

Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/r/20190826153900.25969-1-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/es8316.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c
index 6db002cc20582..96d04896193f2 100644
--- a/sound/soc/codecs/es8316.c
+++ b/sound/soc/codecs/es8316.c
@@ -51,7 +51,10 @@ static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(adc_vol_tlv, -9600, 50, 1);
 static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(alc_max_gain_tlv, -650, 150, 0);
 static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(alc_min_gain_tlv, -1200, 150, 0);
 static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(alc_target_tlv, -1650, 150, 0);
-static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(hpmixer_gain_tlv, -1200, 150, 0);
+static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(hpmixer_gain_tlv,
+	0, 4, TLV_DB_SCALE_ITEM(-1200, 150, 0),
+	8, 11, TLV_DB_SCALE_ITEM(-450, 150, 0),
+);
 
 static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(adc_pga_gain_tlv,
 	0, 0, TLV_DB_SCALE_ITEM(-350, 0, 0),
@@ -89,7 +92,7 @@ static const struct snd_kcontrol_new es8316_snd_controls[] = {
 	SOC_DOUBLE_TLV("Headphone Playback Volume", ES8316_CPHP_ICAL_VOL,
 		       4, 0, 3, 1, hpout_vol_tlv),
 	SOC_DOUBLE_TLV("Headphone Mixer Volume", ES8316_HPMIX_VOL,
-		       0, 4, 7, 0, hpmixer_gain_tlv),
+		       0, 4, 11, 0, hpmixer_gain_tlv),
 
 	SOC_ENUM("Playback Polarity", dacpol),
 	SOC_DOUBLE_R_TLV("DAC Playback Volume", ES8316_DAC_VOLL,
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 123/185] ACPI / CPPC: do not require the _PSD method
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (120 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 122/185] ASoC: es8316: fix headphone mixer volume table Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 124/185] sched/cpufreq: Align trace event behavior of fast switching Sasha Levin
                   ` (61 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Al Stone, Rafael J . Wysocki, Sasha Levin, linux-acpi

From: Al Stone <ahs3@redhat.com>

[ Upstream commit 4c4cdc4c63853fee48c02e25c8605fb65a6c9924 ]

According to the ACPI 6.3 specification, the _PSD method is optional
when using CPPC.  The underlying assumption is that each CPU can change
frequency independently from all other CPUs; _PSD is provided to tell
the OS that some processors can NOT do that.

However, the acpi_get_psd() function returns ENODEV if there is no _PSD
method present, or an ACPI error status if an error occurs when evaluating
_PSD, if present.  This makes _PSD mandatory when using CPPC, in violation
of the specification, and only on Linux.

This has forced some firmware writers to provide a dummy _PSD, even though
it is irrelevant, but only because Linux requires it; other OSPMs follow
the spec.  We really do not want to have OS specific ACPI tables, though.

So, correct acpi_get_psd() so that it does not return an error if there
is no _PSD method present, but does return a failure when the method can
not be executed properly.  This allows _PSD to be optional as it should
be.

Signed-off-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/cppc_acpi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 15f103d7532b0..3b2525908dd8c 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -365,8 +365,10 @@ static int acpi_get_psd(struct cpc_desc *cpc_ptr, acpi_handle handle)
 	union acpi_object  *psd = NULL;
 	struct acpi_psd_package *pdomain;
 
-	status = acpi_evaluate_object_typed(handle, "_PSD", NULL, &buffer,
-			ACPI_TYPE_PACKAGE);
+	status = acpi_evaluate_object_typed(handle, "_PSD", NULL,
+					    &buffer, ACPI_TYPE_PACKAGE);
+	if (status == AE_NOT_FOUND)	/* _PSD is optional */
+		return 0;
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 124/185] sched/cpufreq: Align trace event behavior of fast switching
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (121 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 123/185] ACPI / CPPC: do not require the _PSD method Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 125/185] x86/apic/vector: Warn when vector space exhaustion breaks affinity Sasha Levin
                   ` (60 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Douglas RAILLARD, Peter Zijlstra, Rafael J . Wysocki, Sasha Levin

From: Douglas RAILLARD <douglas.raillard@arm.com>

[ Upstream commit 77c84dd1881d0f0176cb678d770bfbda26c54390 ]

Fast switching path only emits an event for the CPU of interest, whereas the
regular path emits an event for all the CPUs that had their frequency changed,
i.e. all the CPUs sharing the same policy.

With the current behavior, looking at cpu_frequency event for a given CPU that
is using the fast switching path will not give the correct frequency signal.

Signed-off-by: Douglas RAILLARD <douglas.raillard@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/cpufreq_schedutil.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index ae3ec77bb92f6..e139b54716b4a 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -117,6 +117,7 @@ static void sugov_fast_switch(struct sugov_policy *sg_policy, u64 time,
 			      unsigned int next_freq)
 {
 	struct cpufreq_policy *policy = sg_policy->policy;
+	int cpu;
 
 	if (!sugov_update_next_freq(sg_policy, time, next_freq))
 		return;
@@ -126,7 +127,11 @@ static void sugov_fast_switch(struct sugov_policy *sg_policy, u64 time,
 		return;
 
 	policy->cur = next_freq;
-	trace_cpu_frequency(next_freq, smp_processor_id());
+
+	if (trace_cpu_frequency_enabled()) {
+		for_each_cpu(cpu, policy->cpus)
+			trace_cpu_frequency(next_freq, cpu);
+	}
 }
 
 static void sugov_deferred_update(struct sugov_policy *sg_policy, u64 time,
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 125/185] x86/apic/vector: Warn when vector space exhaustion breaks affinity
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (122 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 124/185] sched/cpufreq: Align trace event behavior of fast switching Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 126/185] arm64: kpti: ensure patched kernel text is fetched from PoU Sasha Levin
                   ` (59 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Neil Horman, djuran, Thomas Gleixner, Sasha Levin

From: Neil Horman <nhorman@tuxdriver.com>

[ Upstream commit 743dac494d61d991967ebcfab92e4f80dc7583b3 ]

On x86, CPUs are limited in the number of interrupts they can have affined
to them as they only support 256 interrupt vectors per CPU. 32 vectors are
reserved for the CPU and the kernel reserves another 22 for internal
purposes. That leaves 202 vectors for assignement to devices.

When an interrupt is set up or the affinity is changed by the kernel or the
administrator, the vector assignment code attempts to honor the requested
affinity mask. If the vector space on the CPUs in that affinity mask is
exhausted the code falls back to a wider set of CPUs and assigns a vector
on a CPU outside of the requested affinity mask silently.

While the effective affinity is reflected in the corresponding
/proc/irq/$N/effective_affinity* files the silent breakage of the requested
affinity can lead to unexpected behaviour for administrators.

Add a pr_warn() when this happens so that adminstrators get at least
informed about it in the syslog.

[ tglx: Massaged changelog and made the pr_warn() more informative ]

Reported-by: djuran@redhat.com
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: djuran@redhat.com
Link: https://lkml.kernel.org/r/20190822143421.9535-1-nhorman@tuxdriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/apic/vector.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index fdacb864c3dd4..2c5676b0a6e7f 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -398,6 +398,17 @@ static int activate_reserved(struct irq_data *irqd)
 		if (!irqd_can_reserve(irqd))
 			apicd->can_reserve = false;
 	}
+
+	/*
+	 * Check to ensure that the effective affinity mask is a subset
+	 * the user supplied affinity mask, and warn the user if it is not
+	 */
+	if (!cpumask_subset(irq_data_get_effective_affinity_mask(irqd),
+			    irq_data_get_affinity_mask(irqd))) {
+		pr_warn("irq %u: Affinity broken due to vector space exhaustion.\n",
+			irqd->irq);
+	}
+
 	return ret;
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 126/185] arm64: kpti: ensure patched kernel text is fetched from PoU
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (123 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 125/185] x86/apic/vector: Warn when vector space exhaustion breaks affinity Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 127/185] perf evlist: Use unshare(CLONE_FS) in sb threads to let setns(CLONE_NEWNS) work Sasha Levin
                   ` (58 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Mark Rutland, Catalin Marinas, James Morse, Will Deacon, Sasha Levin

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit f32c7a8e45105bd0af76872bf6eef0438ff12fb2 ]

While the MMUs is disabled, I-cache speculation can result in
instructions being fetched from the PoC. During boot we may patch
instructions (e.g. for alternatives and jump labels), and these may be
dirty at the PoU (and stale at the PoC).

Thus, while the MMU is disabled in the KPTI pagetable fixup code we may
load stale instructions into the I-cache, potentially leading to
subsequent crashes when executing regions of code which have been
modified at runtime.

Similarly to commit:

  8ec41987436d566f ("arm64: mm: ensure patched kernel text is fetched from PoU")

... we can invalidate the I-cache after enabling the MMU to prevent such
issues.

The KPTI pagetable fixup code itself should be clean to the PoC per the
boot protocol, so no maintenance is required for this code.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/mm/proc.S | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 7dbf2be470f6c..28a8f7b87ff06 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -286,6 +286,15 @@ skip_pgd:
 	msr	sctlr_el1, x18
 	isb
 
+	/*
+	 * Invalidate the local I-cache so that any instructions fetched
+	 * speculatively from the PoC are discarded, since they may have
+	 * been dynamically patched at the PoU.
+	 */
+	ic	iallu
+	dsb	nsh
+	isb
+
 	/* Set the flag to zero to indicate that we're all done */
 	str	wzr, [flag_ptr]
 	ret
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 127/185] perf evlist: Use unshare(CLONE_FS) in sb threads to let setns(CLONE_NEWNS) work
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (124 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 126/185] arm64: kpti: ensure patched kernel text is fetched from PoU Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 128/185] x86/mm/pti: Do not invoke PTI functions when PTI is disabled Sasha Levin
                   ` (57 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Arnaldo Carvalho de Melo, Karl Rister, Alexander Shishkin,
	Alexei Starovoitov, Brendan Gregg, Daniel Borkmann,
	Krister Johansen, Namhyung Kim, Peter Zijlstra, Song Liu,
	Stanislav Fomichev, Thomas-Mich Richter, Sasha Levin

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit b397f8468fa27f08b83b348ffa56a226f72453af ]

When we started using a thread to catch the PERF_RECORD_BPF_EVENT meta
data events to then ask the kernel for further info (BTF, etc) for BPF
programs shortly after they get loaded, we forgot to use
unshare(CLONE_FS) as was done in:

  868a832918f6 ("perf top: Support lookup of symbols in other mount namespaces.")

Do it so that we can enter the namespaces to read the build-ids at the
end of a 'perf record' session for the DSOs that had hits.

Before:

Starting a 'stress-ng --cpus 8' inside a container and then, outside the
container running:

  # perf record -a --namespaces sleep 5
  # perf buildid-list | grep stress-ng
  #

We would end up with a 'perf.data' file that had no entry in its
build-id table for the /usr/bin/stress-ng binary inside the container
that got tons of PERF_RECORD_SAMPLEs.

After:

  # perf buildid-list | grep stress-ng
  f2ed02c68341183a124b9b0f6e2e6c493c465b29 /usr/bin/stress-ng
  #

Then its just a matter of making sure that that binary debuginfo package
gets available in a place that 'perf report' will look at build-id keyed
ELF files, which, in my case, on a f30 notebook, was a matter of
installing the debuginfo file for the distro used in the container,
fedora 31:

  # rpm -ivh http://fedora.c3sl.ufpr.br/linux/development/31/Everything/x86_64/debug/tree/Packages/s/stress-ng-debuginfo-0.07.29-10.fc31.x86_64.rpm

Then, because perf currently looks for those debuginfo files (richer ELF
symtab) inside that namespace (look at the setns calls):

  openat(AT_FDCWD, "/proc/self/ns/mnt", O_RDONLY) = 137
  openat(AT_FDCWD, "/proc/13169/ns/mnt", O_RDONLY) = 139
  setns(139, CLONE_NEWNS)                 = 0
  stat("/usr/bin/stress-ng", {st_mode=S_IFREG|0755, st_size=3065416, ...}) = 0
  openat(AT_FDCWD, "/usr/bin/stress-ng", O_RDONLY) = 140
  fcntl(140, F_GETFD)                     = 0
  fstat(140, {st_mode=S_IFREG|0755, st_size=3065416, ...}) = 0
  mmap(NULL, 3065416, PROT_READ, MAP_PRIVATE, 140, 0) = 0x7ff2fdc5b000
  munmap(0x7ff2fdc5b000, 3065416)         = 0
  close(140)                              = 0
  stat("stress-ng-0.07.29-10.fc31.x86_64.debug", 0x7fff45d71260) = -1 ENOENT (No such file or directory)
  stat("/usr/bin/stress-ng-0.07.29-10.fc31.x86_64.debug", 0x7fff45d71260) = -1 ENOENT (No such file or directory)
  stat("/usr/bin/.debug/stress-ng-0.07.29-10.fc31.x86_64.debug", 0x7fff45d71260) = -1 ENOENT (No such file or directory)
  stat("/usr/lib/debug/usr/bin/stress-ng-0.07.29-10.fc31.x86_64.debug", 0x7fff45d71260) = -1 ENOENT (No such file or directory)
  stat("/root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29", 0x7fff45d711e0) = -1 ENOENT (No such file or directory)

To only then go back to the "host" namespace to look just in the users's
~/.debug cache:

  setns(137, CLONE_NEWNS)                 = 0
  chdir("/root")                          = 0
  close(137)                              = 0
  close(139)                              = 0
  stat("/root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf", 0x7fff45d732e0) = -1 ENOENT (No such file or directory)

It continues to fail to resolve symbols:

  # perf report | grep stress-ng | head -5
     9.50%  stress-ng-cpu    stress-ng    [.] 0x0000000000021ac1
     8.58%  stress-ng-cpu    stress-ng    [.] 0x0000000000021ab4
     8.51%  stress-ng-cpu    stress-ng    [.] 0x0000000000021489
     7.17%  stress-ng-cpu    stress-ng    [.] 0x00000000000219b6
     3.93%  stress-ng-cpu    stress-ng    [.] 0x0000000000021478
  #

To overcome that we use:

  # perf buildid-cache -v --add /usr/lib/debug/usr/bin/stress-ng-0.07.29-10.fc31.x86_64.debug
  Adding f2ed02c68341183a124b9b0f6e2e6c493c465b29 /usr/lib/debug/usr/bin/stress-ng-0.07.29-10.fc31.x86_64.debug: Ok
  #
  # ls -la /root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf
  -rw-r--r--. 3 root root 2401184 Jul 27 07:03 /root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf
  # file /root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf
  /root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter \004, BuildID[sha1]=f2ed02c68341183a124b9b0f6e2e6c493c465b29, for GNU/Linux 3.2.0, with debug_info, not stripped, too many notes (256)
  #

Now it finally works:

  # perf report | grep stress-ng | head -5
    23.59%  stress-ng-cpu    stress-ng    [.] ackermann
    23.33%  stress-ng-cpu    stress-ng    [.] is_prime
    17.36%  stress-ng-cpu    stress-ng    [.] stress_cpu_sieve
     6.08%  stress-ng-cpu    stress-ng    [.] stress_cpu_correlate
     3.55%  stress-ng-cpu    stress-ng    [.] queens_try
  #

I'll make sure that it looks for the build-id keyed files in both the
"host" namespace (the namespace the user running 'perf record' was a the
time of the recording) and in the container namespace, as it shouldn't
matter where a content based key lookup finds the ELF file to use in
resolving symbols, etc.

Reported-by: Karl Rister <krister@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Fixes: 657ee5531903 ("perf evlist: Introduce side band thread")
Link: https://lkml.kernel.org/n/tip-g79k0jz41adiaeuqud742t2l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/evlist.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index a474ede17cd6c..001bb444d2056 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -21,6 +21,7 @@
 #include "bpf-event.h"
 #include <signal.h>
 #include <unistd.h>
+#include <sched.h>
 
 #include "parse-events.h"
 #include <subcmd/parse-options.h>
@@ -1870,6 +1871,14 @@ static void *perf_evlist__poll_thread(void *arg)
 	struct perf_evlist *evlist = arg;
 	bool draining = false;
 	int i, done = 0;
+	/*
+	 * In order to read symbols from other namespaces perf to needs to call
+	 * setns(2).  This isn't permitted if the struct_fs has multiple users.
+	 * unshare(2) the fs so that we may continue to setns into namespaces
+	 * that we're observing when, for instance, reading the build-ids at
+	 * the end of a 'perf record' session.
+	 */
+	unshare(CLONE_FS);
 
 	while (!done) {
 		bool got_data = false;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 128/185] x86/mm/pti: Do not invoke PTI functions when PTI is disabled
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (125 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 127/185] perf evlist: Use unshare(CLONE_FS) in sb threads to let setns(CLONE_NEWNS) work Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48   ` Sasha Levin
                   ` (56 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Thomas Gleixner, Dave Hansen, Ingo Molnar, Song Liu,
	Peter Zijlstra, Sasha Levin

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit 990784b57731192b7d90c8d4049e6318d81e887d ]

When PTI is disabled at boot time either because the CPU is not affected or
PTI has been disabled on the command line, the boot code still calls into
pti_finalize() which then unconditionally invokes:

     pti_clone_entry_text()
     pti_clone_kernel_text()

pti_clone_kernel_text() was called unconditionally before the 32bit support
was added and 32bit added the call to pti_clone_entry_text().

The call has no side effects as cloning the page tables into the available
second one, which was allocated for PTI does not create damage. But it does
not make sense either and in case that this functionality would be extended
later this might actually lead to hard to diagnose issues.

Neither function should be called when PTI is runtime disabled. Make the
invocation conditional.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190828143124.063353972@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/pti.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/mm/pti.c b/arch/x86/mm/pti.c
index b196524759ec5..ba22b50f4eca2 100644
--- a/arch/x86/mm/pti.c
+++ b/arch/x86/mm/pti.c
@@ -666,6 +666,8 @@ void __init pti_init(void)
  */
 void pti_finalize(void)
 {
+	if (!boot_cpu_has(X86_FEATURE_PTI))
+		return;
 	/*
 	 * We need to clone everything (again) that maps parts of the
 	 * kernel image.
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 129/185] ASoC: fsl_ssi: Fix clock control issue in master mode
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:48   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Shengjiu Wang, Mark Brown, Sasha Levin, linuxppc-dev

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 696d05225cebffd172008d212657be90e823eac0 ]

The test case is
arecord -Dhw:0 -d 10 -f S16_LE -r 48000 -c 2 temp.wav &
aplay -Dhw:0 -d 30 -f S16_LE -r 48000 -c 2 test.wav

There will be error after end of arecord:
aplay: pcm_write:2051: write error: Input/output error

Capture and Playback work in parallel in master mode, one
substream stops, the other substream is impacted, the
reason is that clock is disabled wrongly.

The clock's reference count is not increased when second
substream starts, the hw_param() function returns in the
beginning because first substream is enabled, then in end
of first substream, the hw_free() disables the clock.

This patch is to move the clock enablement to the place
before checking of the device enablement in hw_param().

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1567012817-12625-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_ssi.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 09b2967befd96..d83be26d64467 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -799,15 +799,6 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
 	u32 wl = SSI_SxCCR_WL(sample_size);
 	int ret;
 
-	/*
-	 * SSI is properly configured if it is enabled and running in
-	 * the synchronous mode; Note that AC97 mode is an exception
-	 * that should set separate configurations for STCCR and SRCCR
-	 * despite running in the synchronous mode.
-	 */
-	if (ssi->streams && ssi->synchronous)
-		return 0;
-
 	if (fsl_ssi_is_i2s_master(ssi)) {
 		ret = fsl_ssi_set_bclk(substream, dai, hw_params);
 		if (ret)
@@ -823,6 +814,15 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
 		}
 	}
 
+	/*
+	 * SSI is properly configured if it is enabled and running in
+	 * the synchronous mode; Note that AC97 mode is an exception
+	 * that should set separate configurations for STCCR and SRCCR
+	 * despite running in the synchronous mode.
+	 */
+	if (ssi->streams && ssi->synchronous)
+		return 0;
+
 	if (!fsl_ssi_is_ac97(ssi)) {
 		/*
 		 * Keep the ssi->i2s_net intact while having a local variable
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 129/185] ASoC: fsl_ssi: Fix clock control issue in master mode
@ 2019-09-22 18:48   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Sasha Levin, Shengjiu Wang, Mark Brown, linuxppc-dev

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 696d05225cebffd172008d212657be90e823eac0 ]

The test case is
arecord -Dhw:0 -d 10 -f S16_LE -r 48000 -c 2 temp.wav &
aplay -Dhw:0 -d 30 -f S16_LE -r 48000 -c 2 test.wav

There will be error after end of arecord:
aplay: pcm_write:2051: write error: Input/output error

Capture and Playback work in parallel in master mode, one
substream stops, the other substream is impacted, the
reason is that clock is disabled wrongly.

The clock's reference count is not increased when second
substream starts, the hw_param() function returns in the
beginning because first substream is enabled, then in end
of first substream, the hw_free() disables the clock.

This patch is to move the clock enablement to the place
before checking of the device enablement in hw_param().

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1567012817-12625-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_ssi.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 09b2967befd96..d83be26d64467 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -799,15 +799,6 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
 	u32 wl = SSI_SxCCR_WL(sample_size);
 	int ret;
 
-	/*
-	 * SSI is properly configured if it is enabled and running in
-	 * the synchronous mode; Note that AC97 mode is an exception
-	 * that should set separate configurations for STCCR and SRCCR
-	 * despite running in the synchronous mode.
-	 */
-	if (ssi->streams && ssi->synchronous)
-		return 0;
-
 	if (fsl_ssi_is_i2s_master(ssi)) {
 		ret = fsl_ssi_set_bclk(substream, dai, hw_params);
 		if (ret)
@@ -823,6 +814,15 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
 		}
 	}
 
+	/*
+	 * SSI is properly configured if it is enabled and running in
+	 * the synchronous mode; Note that AC97 mode is an exception
+	 * that should set separate configurations for STCCR and SRCCR
+	 * despite running in the synchronous mode.
+	 */
+	if (ssi->streams && ssi->synchronous)
+		return 0;
+
 	if (!fsl_ssi_is_ac97(ssi)) {
 		/*
 		 * Keep the ssi->i2s_net intact while having a local variable
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 130/185] x86/mm/pti: Handle unaligned address gracefully in pti_clone_pagetable()
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (127 preceding siblings ...)
  2019-09-22 18:48   ` Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48   ` Sasha Levin
                   ` (54 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Song Liu, Thomas Gleixner, Ingo Molnar, Peter Zijlstra, Sasha Levin

From: Song Liu <songliubraving@fb.com>

[ Upstream commit 825d0b73cd7526b0bb186798583fae810091cbac ]

pti_clone_pmds() assumes that the supplied address is either:

 - properly PUD/PMD aligned
or
 - the address is actually mapped which means that independently
   of the mapping level (PUD/PMD/PTE) the next higher mapping
   exists.

If that's not the case the unaligned address can be incremented by PUD or
PMD size incorrectly. All callers supply mapped and/or aligned addresses,
but for the sake of robustness it's better to handle that case properly and
to emit a warning.

[ tglx: Rewrote changelog and added WARN_ON_ONCE() ]

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908282352470.1938@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/pti.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/x86/mm/pti.c b/arch/x86/mm/pti.c
index ba22b50f4eca2..7f2140414440d 100644
--- a/arch/x86/mm/pti.c
+++ b/arch/x86/mm/pti.c
@@ -330,13 +330,15 @@ pti_clone_pgtable(unsigned long start, unsigned long end,
 
 		pud = pud_offset(p4d, addr);
 		if (pud_none(*pud)) {
-			addr += PUD_SIZE;
+			WARN_ON_ONCE(addr & ~PUD_MASK);
+			addr = round_up(addr + 1, PUD_SIZE);
 			continue;
 		}
 
 		pmd = pmd_offset(pud, addr);
 		if (pmd_none(*pmd)) {
-			addr += PMD_SIZE;
+			WARN_ON_ONCE(addr & ~PMD_MASK);
+			addr = round_up(addr + 1, PMD_SIZE);
 			continue;
 		}
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 131/185] nvmet: fix data units read and written counters in SMART log
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:48   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tom Wu, Israel Rukshin, Max Gurtovoy, Chaitanya Kulkarni,
	Christoph Hellwig, Sagi Grimberg, Sasha Levin, linux-nvme

From: Tom Wu <tomwu@mellanox.com>

[ Upstream commit 3bec2e3754becebd4c452999adb49bc62c575ea4 ]

In nvme spec 1.3 there is a definition for data write/read counters
from SMART log, (See section 5.14.1.2):
	This value is reported in thousands (i.e., a value of 1
	corresponds to 1000 units of 512 bytes read) and is rounded up.

However, in nvme target where value is reported with actual units,
but not thousands of units as the spec requires.

Signed-off-by: Tom Wu <tomwu@mellanox.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/admin-cmd.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
index 9f72d515fc4b3..4099093a17343 100644
--- a/drivers/nvme/target/admin-cmd.c
+++ b/drivers/nvme/target/admin-cmd.c
@@ -81,9 +81,11 @@ static u16 nvmet_get_smart_log_nsid(struct nvmet_req *req,
 		goto out;
 
 	host_reads = part_stat_read(ns->bdev->bd_part, ios[READ]);
-	data_units_read = part_stat_read(ns->bdev->bd_part, sectors[READ]);
+	data_units_read = DIV_ROUND_UP(part_stat_read(ns->bdev->bd_part,
+		sectors[READ]), 1000);
 	host_writes = part_stat_read(ns->bdev->bd_part, ios[WRITE]);
-	data_units_written = part_stat_read(ns->bdev->bd_part, sectors[WRITE]);
+	data_units_written = DIV_ROUND_UP(part_stat_read(ns->bdev->bd_part,
+		sectors[WRITE]), 1000);
 
 	put_unaligned_le64(host_reads, &slog->host_reads[0]);
 	put_unaligned_le64(data_units_read, &slog->data_units_read[0]);
@@ -111,11 +113,11 @@ static u16 nvmet_get_smart_log_all(struct nvmet_req *req,
 		if (!ns->bdev)
 			continue;
 		host_reads += part_stat_read(ns->bdev->bd_part, ios[READ]);
-		data_units_read +=
-			part_stat_read(ns->bdev->bd_part, sectors[READ]);
+		data_units_read += DIV_ROUND_UP(
+			part_stat_read(ns->bdev->bd_part, sectors[READ]), 1000);
 		host_writes += part_stat_read(ns->bdev->bd_part, ios[WRITE]);
-		data_units_written +=
-			part_stat_read(ns->bdev->bd_part, sectors[WRITE]);
+		data_units_written += DIV_ROUND_UP(
+			part_stat_read(ns->bdev->bd_part, sectors[WRITE]), 1000);
 
 	}
 	rcu_read_unlock();
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 131/185] nvmet: fix data units read and written counters in SMART log
@ 2019-09-22 18:48   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Sagi Grimberg, Chaitanya Kulkarni, Israel Rukshin,
	linux-nvme, Tom Wu, Max Gurtovoy, Christoph Hellwig

From: Tom Wu <tomwu@mellanox.com>

[ Upstream commit 3bec2e3754becebd4c452999adb49bc62c575ea4 ]

In nvme spec 1.3 there is a definition for data write/read counters
from SMART log, (See section 5.14.1.2):
	This value is reported in thousands (i.e., a value of 1
	corresponds to 1000 units of 512 bytes read) and is rounded up.

However, in nvme target where value is reported with actual units,
but not thousands of units as the spec requires.

Signed-off-by: Tom Wu <tomwu@mellanox.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/admin-cmd.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
index 9f72d515fc4b3..4099093a17343 100644
--- a/drivers/nvme/target/admin-cmd.c
+++ b/drivers/nvme/target/admin-cmd.c
@@ -81,9 +81,11 @@ static u16 nvmet_get_smart_log_nsid(struct nvmet_req *req,
 		goto out;
 
 	host_reads = part_stat_read(ns->bdev->bd_part, ios[READ]);
-	data_units_read = part_stat_read(ns->bdev->bd_part, sectors[READ]);
+	data_units_read = DIV_ROUND_UP(part_stat_read(ns->bdev->bd_part,
+		sectors[READ]), 1000);
 	host_writes = part_stat_read(ns->bdev->bd_part, ios[WRITE]);
-	data_units_written = part_stat_read(ns->bdev->bd_part, sectors[WRITE]);
+	data_units_written = DIV_ROUND_UP(part_stat_read(ns->bdev->bd_part,
+		sectors[WRITE]), 1000);
 
 	put_unaligned_le64(host_reads, &slog->host_reads[0]);
 	put_unaligned_le64(data_units_read, &slog->data_units_read[0]);
@@ -111,11 +113,11 @@ static u16 nvmet_get_smart_log_all(struct nvmet_req *req,
 		if (!ns->bdev)
 			continue;
 		host_reads += part_stat_read(ns->bdev->bd_part, ios[READ]);
-		data_units_read +=
-			part_stat_read(ns->bdev->bd_part, sectors[READ]);
+		data_units_read += DIV_ROUND_UP(
+			part_stat_read(ns->bdev->bd_part, sectors[READ]), 1000);
 		host_writes += part_stat_read(ns->bdev->bd_part, ios[WRITE]);
-		data_units_written +=
-			part_stat_read(ns->bdev->bd_part, sectors[WRITE]);
+		data_units_written += DIV_ROUND_UP(
+			part_stat_read(ns->bdev->bd_part, sectors[WRITE]), 1000);
 
 	}
 	rcu_read_unlock();
-- 
2.20.1


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 132/185] nvme-multipath: fix ana log nsid lookup when nsid is not found
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:48   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Anton Eidelman, James Smart, Hannes Reinecke, Christoph Hellwig,
	Sagi Grimberg, Sasha Levin, linux-nvme

From: Anton Eidelman <anton@lightbitslabs.com>

[ Upstream commit e01f91dff91c7b16a6e3faf2565017d497a73f83 ]

ANA log parsing invokes nvme_update_ana_state() per ANA group desc.
This updates the state of namespaces with nsids in desc->nsids[].

Both ctrl->namespaces list and desc->nsids[] array are sorted by nsid.
Hence nvme_update_ana_state() performs a single walk over ctrl->namespaces:
- if current namespace matches the current desc->nsids[n],
  this namespace is updated, and n is incremented.
- the process stops when it encounters the end of either
  ctrl->namespaces end or desc->nsids[]

In case desc->nsids[n] does not match any of ctrl->namespaces,
the remaining nsids following desc->nsids[n] will not be updated.
Such situation was considered abnormal and generated WARN_ON_ONCE.

However ANA log MAY contain nsids not (yet) found in ctrl->namespaces.
For example, lets consider the following scenario:
- nvme0 exposes namespaces with nsids = [2, 3] to the host
- a new namespace nsid = 1 is added dynamically
- also, a ANA topology change is triggered
- NS_CHANGED aen is generated and triggers scan_work
- before scan_work discovers nsid=1 and creates a namespace, a NOTICE_ANA
  aen was issues and ana_work receives ANA log with nsids=[1, 2, 3]

Result: ana_work fails to update ANA state on existing namespaces [2, 3]

Solution:
Change the way nvme_update_ana_state() namespace list walk
checks the current namespace against desc->nsids[n] as follows:
a) ns->head->ns_id < desc->nsids[n]: keep walking ctrl->namespaces.
b) ns->head->ns_id == desc->nsids[n]: match, update the namespace
c) ns->head->ns_id >= desc->nsids[n]: skip to desc->nsids[n+1]

This enables correct operation in the scenario described above.
This also allows ANA log to contain nsids currently invisible
to the host, i.e. inactive nsids.

Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Reviewed-by:   James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/multipath.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 304aa8a65f2f8..f928bcfc57b5b 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -501,14 +501,16 @@ static int nvme_update_ana_state(struct nvme_ctrl *ctrl,
 
 	down_write(&ctrl->namespaces_rwsem);
 	list_for_each_entry(ns, &ctrl->namespaces, list) {
-		if (ns->head->ns_id != le32_to_cpu(desc->nsids[n]))
+		unsigned nsid = le32_to_cpu(desc->nsids[n]);
+
+		if (ns->head->ns_id < nsid)
 			continue;
-		nvme_update_ns_ana_state(desc, ns);
+		if (ns->head->ns_id == nsid)
+			nvme_update_ns_ana_state(desc, ns);
 		if (++n == nr_nsids)
 			break;
 	}
 	up_write(&ctrl->namespaces_rwsem);
-	WARN_ON_ONCE(n < nr_nsids);
 	return 0;
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 132/185] nvme-multipath: fix ana log nsid lookup when nsid is not found
@ 2019-09-22 18:48   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Anton Eidelman, Sagi Grimberg, James Smart,
	linux-nvme, Hannes Reinecke, Christoph Hellwig

From: Anton Eidelman <anton@lightbitslabs.com>

[ Upstream commit e01f91dff91c7b16a6e3faf2565017d497a73f83 ]

ANA log parsing invokes nvme_update_ana_state() per ANA group desc.
This updates the state of namespaces with nsids in desc->nsids[].

Both ctrl->namespaces list and desc->nsids[] array are sorted by nsid.
Hence nvme_update_ana_state() performs a single walk over ctrl->namespaces:
- if current namespace matches the current desc->nsids[n],
  this namespace is updated, and n is incremented.
- the process stops when it encounters the end of either
  ctrl->namespaces end or desc->nsids[]

In case desc->nsids[n] does not match any of ctrl->namespaces,
the remaining nsids following desc->nsids[n] will not be updated.
Such situation was considered abnormal and generated WARN_ON_ONCE.

However ANA log MAY contain nsids not (yet) found in ctrl->namespaces.
For example, lets consider the following scenario:
- nvme0 exposes namespaces with nsids = [2, 3] to the host
- a new namespace nsid = 1 is added dynamically
- also, a ANA topology change is triggered
- NS_CHANGED aen is generated and triggers scan_work
- before scan_work discovers nsid=1 and creates a namespace, a NOTICE_ANA
  aen was issues and ana_work receives ANA log with nsids=[1, 2, 3]

Result: ana_work fails to update ANA state on existing namespaces [2, 3]

Solution:
Change the way nvme_update_ana_state() namespace list walk
checks the current namespace against desc->nsids[n] as follows:
a) ns->head->ns_id < desc->nsids[n]: keep walking ctrl->namespaces.
b) ns->head->ns_id == desc->nsids[n]: match, update the namespace
c) ns->head->ns_id >= desc->nsids[n]: skip to desc->nsids[n+1]

This enables correct operation in the scenario described above.
This also allows ANA log to contain nsids currently invisible
to the host, i.e. inactive nsids.

Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Reviewed-by:   James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/multipath.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 304aa8a65f2f8..f928bcfc57b5b 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -501,14 +501,16 @@ static int nvme_update_ana_state(struct nvme_ctrl *ctrl,
 
 	down_write(&ctrl->namespaces_rwsem);
 	list_for_each_entry(ns, &ctrl->namespaces, list) {
-		if (ns->head->ns_id != le32_to_cpu(desc->nsids[n]))
+		unsigned nsid = le32_to_cpu(desc->nsids[n]);
+
+		if (ns->head->ns_id < nsid)
 			continue;
-		nvme_update_ns_ana_state(desc, ns);
+		if (ns->head->ns_id == nsid)
+			nvme_update_ns_ana_state(desc, ns);
 		if (++n == nr_nsids)
 			break;
 	}
 	up_write(&ctrl->namespaces_rwsem);
-	WARN_ON_ONCE(n < nr_nsids);
 	return 0;
 }
 
-- 
2.20.1


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 133/185] ALSA: firewire-motu: add support for MOTU 4pre
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (130 preceding siblings ...)
  2019-09-22 18:48   ` Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 134/185] arm64: lse: Make ARM64_LSE_ATOMICS depend on JUMP_LABEL Sasha Levin
                   ` (51 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Takashi Sakamoto, Takashi Iwai, Sasha Levin

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

[ Upstream commit 6af86bdb8ad41f4cf1292d3b10857dc322758328 ]

MOTU 4pre was launched in 2012 by MOTU, Inc. This commit allows userspace
applications can transmit and receive PCM frames and MIDI messages for
this model via ALSA PCM interface and RawMidi/Sequencer interfaces.

The device supports MOTU protocol version 3. Unlike the other devices, the
device is simply designed. The size of data block is fixed to 10 quadlets
during available sampling rates (44.1 - 96.0 kHz). Each data block
includes 1 source packet header, 2 data chunks for messages, 8 data chunks
for PCM samples and 2 data chunks for padding to quadlet alignment. The
device has no MIDI, optical, BNC and AES/EBU interfaces.

Like support for the other MOTU devices, the quality of playback sound
is not enough good with periodical noise yet.

$ python2 crpp < ~/git/am-config-rom/motu/motu-4pre.img
               ROM header and bus information block
               -----------------------------------------------------------------
400  041078cc  bus_info_length 4, crc_length 16, crc 30924
404  31333934  bus_name "1394"
408  20ff7000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c  0001f200  company_id 0001f2     |
410  000a41c5  device_id 00000a41c5  | EUI-64 0001f200000a41c5

               root directory
               -----------------------------------------------------------------
414  0004ef04  directory_length 4, crc 61188
418  030001f2  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  d1000002  --> unit directory at 428
424  8d000005  --> eui-64 leaf at 438

               unit directory at 428
               -----------------------------------------------------------------
428  0003ceda  directory_length 3, crc 52954
42c  120001f2  specifier id
430  13000045  version
434  17103800  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  0002d248  leaf_length 2, crc 53832
43c  0001f200  company_id 0001f2     |
440  000a41c5  device_id 00000a41c5  | EUI-64 0001f200000a41c5

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/firewire/motu/motu.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/sound/firewire/motu/motu.c b/sound/firewire/motu/motu.c
index 03cda2166ea3d..72908b4de77c0 100644
--- a/sound/firewire/motu/motu.c
+++ b/sound/firewire/motu/motu.c
@@ -247,6 +247,17 @@ static const struct snd_motu_spec motu_audio_express = {
 	.analog_out_ports = 4,
 };
 
+static const struct snd_motu_spec motu_4pre = {
+	.name = "4pre",
+	.protocol = &snd_motu_protocol_v3,
+	.flags = SND_MOTU_SPEC_SUPPORT_CLOCK_X2 |
+		 SND_MOTU_SPEC_TX_MICINST_CHUNK |
+		 SND_MOTU_SPEC_TX_RETURN_CHUNK |
+		 SND_MOTU_SPEC_RX_SEPARETED_MAIN,
+	.analog_in_ports = 2,
+	.analog_out_ports = 2,
+};
+
 #define SND_MOTU_DEV_ENTRY(model, data)			\
 {							\
 	.match_flags	= IEEE1394_MATCH_VENDOR_ID |	\
@@ -265,6 +276,7 @@ static const struct ieee1394_device_id motu_id_table[] = {
 	SND_MOTU_DEV_ENTRY(0x000015, &motu_828mk3),	/* FireWire only. */
 	SND_MOTU_DEV_ENTRY(0x000035, &motu_828mk3),	/* Hybrid. */
 	SND_MOTU_DEV_ENTRY(0x000033, &motu_audio_express),
+	SND_MOTU_DEV_ENTRY(0x000045, &motu_4pre),
 	{ }
 };
 MODULE_DEVICE_TABLE(ieee1394, motu_id_table);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 134/185] arm64: lse: Make ARM64_LSE_ATOMICS depend on JUMP_LABEL
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (131 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 133/185] ALSA: firewire-motu: add support for MOTU 4pre Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48   ` Sasha Levin
                   ` (50 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Will Deacon, Andrew Murray, Sasha Levin

From: Will Deacon <will@kernel.org>

[ Upstream commit b32baf91f60fb9c7010bff87e68132f2ce31d9a8 ]

Support for LSE atomic instructions (CONFIG_ARM64_LSE_ATOMICS) relies on
a static key to select between the legacy LL/SC implementation which is
available on all arm64 CPUs and the super-duper LSE implementation which
is available on CPUs implementing v8.1 and later.

Unfortunately, when building a kernel with CONFIG_JUMP_LABEL disabled
(e.g. because the toolchain doesn't support 'asm goto'), the static key
inside the atomics code tries to use atomics itself. This results in a
mess of circular includes and a build failure:

In file included from ./arch/arm64/include/asm/lse.h:11,
                 from ./arch/arm64/include/asm/atomic.h:16,
                 from ./include/linux/atomic.h:7,
                 from ./include/asm-generic/bitops/atomic.h:5,
                 from ./arch/arm64/include/asm/bitops.h:26,
                 from ./include/linux/bitops.h:19,
                 from ./include/linux/kernel.h:12,
                 from ./include/asm-generic/bug.h:18,
                 from ./arch/arm64/include/asm/bug.h:26,
                 from ./include/linux/bug.h:5,
                 from ./include/linux/page-flags.h:10,
                 from kernel/bounds.c:10:
./include/linux/jump_label.h: In function ‘static_key_count’:
./include/linux/jump_label.h:254:9: error: implicit declaration of function ‘atomic_read’ [-Werror=implicit-function-declaration]
  return atomic_read(&key->enabled);
         ^~~~~~~~~~~

[ ... more of the same ... ]

Since LSE atomic instructions are not critical to the operation of the
kernel, make them depend on JUMP_LABEL at compile time.

Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index cf5f1dafcf74b..885603e5df135 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1261,6 +1261,7 @@ config ARM64_PAN
 
 config ARM64_LSE_ATOMICS
 	bool "Atomic instructions"
+	depends on JUMP_LABEL
 	default y
 	help
 	  As part of the Large System Extensions, ARMv8.1 introduces new
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 135/185] iommu/amd: Silence warnings under memory pressure
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:48   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Qian Cai, Joerg Roedel, Sasha Levin, iommu

From: Qian Cai <cai@lca.pw>

[ Upstream commit 3d708895325b78506e8daf00ef31549476e8586a ]

When running heavy memory pressure workloads, the system is throwing
endless warnings,

smartpqi 0000:23:00.0: AMD-Vi: IOMMU mapping error in map_sg (io-pages:
5 reason: -12)
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40
07/10/2019
swapper/10: page allocation failure: order:0, mode:0xa20(GFP_ATOMIC),
nodemask=(null),cpuset=/,mems_allowed=0,4
Call Trace:
 <IRQ>
 dump_stack+0x62/0x9a
 warn_alloc.cold.43+0x8a/0x148
 __alloc_pages_nodemask+0x1a5c/0x1bb0
 get_zeroed_page+0x16/0x20
 iommu_map_page+0x477/0x540
 map_sg+0x1ce/0x2f0
 scsi_dma_map+0xc6/0x160
 pqi_raid_submit_scsi_cmd_with_io_request+0x1c3/0x470 [smartpqi]
 do_IRQ+0x81/0x170
 common_interrupt+0xf/0xf
 </IRQ>

because the allocation could fail from iommu_map_page(), and the volume
of this call could be huge which may generate a lot of serial console
output and cosumes all CPUs.

Fix it by silencing the warning in this call site, and there is still a
dev_err() later to notify the failure.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index dce1d8d2e8a44..2bbe931c3585e 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -2540,7 +2540,9 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 
 			bus_addr  = address + s->dma_address + (j << PAGE_SHIFT);
 			phys_addr = (sg_phys(s) & PAGE_MASK) + (j << PAGE_SHIFT);
-			ret = iommu_map_page(domain, bus_addr, phys_addr, PAGE_SIZE, prot, GFP_ATOMIC);
+			ret = iommu_map_page(domain, bus_addr, phys_addr,
+					     PAGE_SIZE, prot,
+					     GFP_ATOMIC | __GFP_NOWARN);
 			if (ret)
 				goto out_unmap;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 135/185] iommu/amd: Silence warnings under memory pressure
@ 2019-09-22 18:48   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Sasha Levin, iommu, Joerg Roedel

From: Qian Cai <cai@lca.pw>

[ Upstream commit 3d708895325b78506e8daf00ef31549476e8586a ]

When running heavy memory pressure workloads, the system is throwing
endless warnings,

smartpqi 0000:23:00.0: AMD-Vi: IOMMU mapping error in map_sg (io-pages:
5 reason: -12)
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40
07/10/2019
swapper/10: page allocation failure: order:0, mode:0xa20(GFP_ATOMIC),
nodemask=(null),cpuset=/,mems_allowed=0,4
Call Trace:
 <IRQ>
 dump_stack+0x62/0x9a
 warn_alloc.cold.43+0x8a/0x148
 __alloc_pages_nodemask+0x1a5c/0x1bb0
 get_zeroed_page+0x16/0x20
 iommu_map_page+0x477/0x540
 map_sg+0x1ce/0x2f0
 scsi_dma_map+0xc6/0x160
 pqi_raid_submit_scsi_cmd_with_io_request+0x1c3/0x470 [smartpqi]
 do_IRQ+0x81/0x170
 common_interrupt+0xf/0xf
 </IRQ>

because the allocation could fail from iommu_map_page(), and the volume
of this call could be huge which may generate a lot of serial console
output and cosumes all CPUs.

Fix it by silencing the warning in this call site, and there is still a
dev_err() later to notify the failure.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index dce1d8d2e8a44..2bbe931c3585e 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -2540,7 +2540,9 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 
 			bus_addr  = address + s->dma_address + (j << PAGE_SHIFT);
 			phys_addr = (sg_phys(s) & PAGE_MASK) + (j << PAGE_SHIFT);
-			ret = iommu_map_page(domain, bus_addr, phys_addr, PAGE_SIZE, prot, GFP_ATOMIC);
+			ret = iommu_map_page(domain, bus_addr, phys_addr,
+					     PAGE_SIZE, prot,
+					     GFP_ATOMIC | __GFP_NOWARN);
 			if (ret)
 				goto out_unmap;
 
-- 
2.20.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 136/185] ASoC: Intel: Haswell: Adjust machine device private context
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (133 preceding siblings ...)
  2019-09-22 18:48   ` Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 137/185] libata/ahci: Drop PCS quirk for Denverton and beyond Sasha Levin
                   ` (48 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Cezary Rojewski, Pierre-Louis Bossart, Mark Brown, Sasha Levin

From: Cezary Rojewski <cezary.rojewski@intel.com>

[ Upstream commit ca964edf0ddbfec2cb10b3d251d09598e7ca9b13 ]

Apart from Haswell machines, all other devices have their private data
set to snd_soc_acpi_mach instance.

Changes for HSW/ BDW boards introduced with series:
https://patchwork.kernel.org/cover/10782035/

added support for dai_link platform_name adjustments within card probe
routines. These take for granted private_data points to
snd_soc_acpi_mach whereas for Haswell, it's sst_pdata instead. Change
private context of platform_device - representing machine board - to
address this.

Fixes: e87055d732e3 ("ASoC: Intel: haswell: platform name fixup support")
Fixes: 7e40ddcf974a ("ASoC: Intel: bdw-rt5677: platform name fixup support")
Fixes: 2d067b2807f9 ("ASoC: Intel: broadwell: platform name fixup support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190822113616.22702-2-cezary.rojewski@intel.com
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/common/sst-acpi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/intel/common/sst-acpi.c b/sound/soc/intel/common/sst-acpi.c
index 0e8e0a7a11df3..5854868650b9e 100644
--- a/sound/soc/intel/common/sst-acpi.c
+++ b/sound/soc/intel/common/sst-acpi.c
@@ -141,11 +141,12 @@ static int sst_acpi_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, sst_acpi);
+	mach->pdata = sst_pdata;
 
 	/* register machine driver */
 	sst_acpi->pdev_mach =
 		platform_device_register_data(dev, mach->drv_name, -1,
-					      sst_pdata, sizeof(*sst_pdata));
+					      mach, sizeof(*mach));
 	if (IS_ERR(sst_acpi->pdev_mach))
 		return PTR_ERR(sst_acpi->pdev_mach);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 137/185] libata/ahci: Drop PCS quirk for Denverton and beyond
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (134 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 136/185] ASoC: Intel: Haswell: Adjust machine device private context Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48   ` Sasha Levin
                   ` (47 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Dan Williams, Stephen Douthit, Christoph Hellwig, Jens Axboe,
	Sasha Levin, linux-ide

From: Dan Williams <dan.j.williams@intel.com>

[ Upstream commit c312ef176399e04fc5f7f2809d9a589751fbf6d9 ]

The Linux ahci driver has historically implemented a configuration fixup
for platforms / platform-firmware that fails to enable the ports prior
to OS hand-off at boot. The fixup was originally implemented way back
before ahci moved from drivers/scsi/ to drivers/ata/, and was updated in
2007 via commit 49f290903935 "ahci: update PCS programming". The quirk
sets a port-enable bitmap in the PCS register at offset 0x92.

This quirk could be applied generically up until the arrival of the
Denverton (DNV) platform. The DNV AHCI controller architecture supports
more than 6 ports and along with that the PCS register location and
format were updated to allow for more possible ports in the bitmap. DNV
AHCI expands the register to 32-bits and moves it to offset 0x94.

As it stands there are no known problem reports with existing Linux
trying to set bits at offset 0x92 which indicates that the quirk is not
applicable. Likely it is not applicable on a wider range of platforms,
but it is difficult to discern which platforms if any still depend on
the quirk.

Rather than try to fix the PCS quirk to consider the DNV register layout
instead require explicit opt-in. The assumption is that the OS driver
need not touch this register, and platforms can be added with a new
boad_ahci_pcs7 board-id when / if problematic platforms are found in the
future. The logic in ahci_intel_pcs_quirk() looks for all Intel AHCI
instances with "legacy" board-ids and otherwise skips the quirk if the
board was matched by class-code.

Reported-by: Stephen Douthit <stephend@silicom-usa.com>
Cc: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Stephen Douthit <stephend@silicom-usa.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/ahci.c | 116 +++++++++++++++++++++++++++------------------
 drivers/ata/ahci.h |   2 +
 2 files changed, 71 insertions(+), 47 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index f7652baa63370..3e63294304c72 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -65,6 +65,12 @@ enum board_ids {
 	board_ahci_sb700,	/* for SB700 and SB800 */
 	board_ahci_vt8251,
 
+	/*
+	 * board IDs for Intel chipsets that support more than 6 ports
+	 * *and* end up needing the PCS quirk.
+	 */
+	board_ahci_pcs7,
+
 	/* aliases */
 	board_ahci_mcp_linux	= board_ahci_mcp65,
 	board_ahci_mcp67	= board_ahci_mcp65,
@@ -220,6 +226,12 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_vt8251_ops,
 	},
+	[board_ahci_pcs7] = {
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	},
 };
 
 static const struct pci_device_id ahci_pci_tbl[] = {
@@ -264,26 +276,26 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
 	{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci_mobile }, /* PCH M RAID */
 	{ PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b0), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b1), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b2), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b3), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b4), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b5), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b6), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b7), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19bE), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19bF), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c0), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c1), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c2), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c3), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c4), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c5), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c6), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c7), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19cE), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19cF), board_ahci }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b0), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b1), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b2), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b3), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b4), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b5), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b6), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b7), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19bE), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19bF), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c0), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c1), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c2), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c3), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c4), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c5), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c6), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c7), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19cE), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19cF), board_ahci_pcs7 }, /* DNV AHCI */
 	{ PCI_VDEVICE(INTEL, 0x1c02), board_ahci }, /* CPT AHCI */
 	{ PCI_VDEVICE(INTEL, 0x1c03), board_ahci_mobile }, /* CPT M AHCI */
 	{ PCI_VDEVICE(INTEL, 0x1c04), board_ahci }, /* CPT RAID */
@@ -623,30 +635,6 @@ static void ahci_pci_save_initial_config(struct pci_dev *pdev,
 	ahci_save_initial_config(&pdev->dev, hpriv);
 }
 
-static int ahci_pci_reset_controller(struct ata_host *host)
-{
-	struct pci_dev *pdev = to_pci_dev(host->dev);
-	int rc;
-
-	rc = ahci_reset_controller(host);
-	if (rc)
-		return rc;
-
-	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
-		struct ahci_host_priv *hpriv = host->private_data;
-		u16 tmp16;
-
-		/* configure PCS */
-		pci_read_config_word(pdev, 0x92, &tmp16);
-		if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
-			tmp16 |= hpriv->port_map;
-			pci_write_config_word(pdev, 0x92, tmp16);
-		}
-	}
-
-	return 0;
-}
-
 static void ahci_pci_init_controller(struct ata_host *host)
 {
 	struct ahci_host_priv *hpriv = host->private_data;
@@ -849,7 +837,7 @@ static int ahci_pci_device_runtime_resume(struct device *dev)
 	struct ata_host *host = pci_get_drvdata(pdev);
 	int rc;
 
-	rc = ahci_pci_reset_controller(host);
+	rc = ahci_reset_controller(host);
 	if (rc)
 		return rc;
 	ahci_pci_init_controller(host);
@@ -884,7 +872,7 @@ static int ahci_pci_device_resume(struct device *dev)
 		ahci_mcp89_apple_enable(pdev);
 
 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
-		rc = ahci_pci_reset_controller(host);
+		rc = ahci_reset_controller(host);
 		if (rc)
 			return rc;
 
@@ -1619,6 +1607,34 @@ static void ahci_update_initial_lpm_policy(struct ata_port *ap,
 		ap->target_lpm_policy = policy;
 }
 
+static void ahci_intel_pcs_quirk(struct pci_dev *pdev, struct ahci_host_priv *hpriv)
+{
+	const struct pci_device_id *id = pci_match_id(ahci_pci_tbl, pdev);
+	u16 tmp16;
+
+	/*
+	 * Only apply the 6-port PCS quirk for known legacy platforms.
+	 */
+	if (!id || id->vendor != PCI_VENDOR_ID_INTEL)
+		return;
+	if (((enum board_ids) id->driver_data) < board_ahci_pcs7)
+		return;
+
+	/*
+	 * port_map is determined from PORTS_IMPL PCI register which is
+	 * implemented as write or write-once register.  If the register
+	 * isn't programmed, ahci automatically generates it from number
+	 * of ports, which is good enough for PCS programming. It is
+	 * otherwise expected that platform firmware enables the ports
+	 * before the OS boots.
+	 */
+	pci_read_config_word(pdev, PCS_6, &tmp16);
+	if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
+		tmp16 |= hpriv->port_map;
+		pci_write_config_word(pdev, PCS_6, tmp16);
+	}
+}
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	unsigned int board_id = ent->driver_data;
@@ -1731,6 +1747,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* save initial config */
 	ahci_pci_save_initial_config(pdev, hpriv);
 
+	/*
+	 * If platform firmware failed to enable ports, try to enable
+	 * them here.
+	 */
+	ahci_intel_pcs_quirk(pdev, hpriv);
+
 	/* prepare host */
 	if (hpriv->cap & HOST_CAP_NCQ) {
 		pi.flags |= ATA_FLAG_NCQ;
@@ -1840,7 +1862,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	rc = ahci_pci_reset_controller(host);
+	rc = ahci_reset_controller(host);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 0570629d719d8..3dbf398c92eaf 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -247,6 +247,8 @@ enum {
 					  ATA_FLAG_ACPI_SATA | ATA_FLAG_AN,
 
 	ICH_MAP				= 0x90, /* ICH MAP register */
+	PCS_6				= 0x92, /* 6 port PCS */
+	PCS_7				= 0x94, /* 7+ port PCS (Denverton) */
 
 	/* em constants */
 	EM_MAX_SLOTS			= 8,
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 138/185] iommu/iova: Avoid false sharing on fq_timer_on
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:48   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Eric Dumazet, Jinyu Qi, Joerg Roedel, Robin Murphy, Sasha Levin, iommu

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 0d87308cca2c124f9bce02383f1d9632c9be89c4 ]

In commit 14bd9a607f90 ("iommu/iova: Separate atomic variables
to improve performance") Jinyu Qi identified that the atomic_cmpxchg()
in queue_iova() was causing a performance loss and moved critical fields
so that the false sharing would not impact them.

However, avoiding the false sharing in the first place seems easy.
We should attempt the atomic_cmpxchg() no more than 100 times
per second. Adding an atomic_read() will keep the cache
line mostly shared.

This false sharing came with commit 9a005a800ae8
("iommu/iova: Add flush timer").

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 9a005a800ae8 ('iommu/iova: Add flush timer')
Cc: Jinyu Qi <jinyuqi@huawei.com>
Cc: Joerg Roedel <jroedel@suse.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/iova.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
index 3e1a8a6755723..41c605b0058f9 100644
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -577,7 +577,9 @@ void queue_iova(struct iova_domain *iovad,
 
 	spin_unlock_irqrestore(&fq->lock, flags);
 
-	if (atomic_cmpxchg(&iovad->fq_timer_on, 0, 1) == 0)
+	/* Avoid false sharing as much as possible. */
+	if (!atomic_read(&iovad->fq_timer_on) &&
+	    !atomic_cmpxchg(&iovad->fq_timer_on, 0, 1))
 		mod_timer(&iovad->fq_timer,
 			  jiffies + msecs_to_jiffies(IOVA_FQ_TIMEOUT));
 }
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 138/185] iommu/iova: Avoid false sharing on fq_timer_on
@ 2019-09-22 18:48   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Joerg Roedel, iommu, Jinyu Qi, Eric Dumazet, Robin Murphy

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 0d87308cca2c124f9bce02383f1d9632c9be89c4 ]

In commit 14bd9a607f90 ("iommu/iova: Separate atomic variables
to improve performance") Jinyu Qi identified that the atomic_cmpxchg()
in queue_iova() was causing a performance loss and moved critical fields
so that the false sharing would not impact them.

However, avoiding the false sharing in the first place seems easy.
We should attempt the atomic_cmpxchg() no more than 100 times
per second. Adding an atomic_read() will keep the cache
line mostly shared.

This false sharing came with commit 9a005a800ae8
("iommu/iova: Add flush timer").

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 9a005a800ae8 ('iommu/iova: Add flush timer')
Cc: Jinyu Qi <jinyuqi@huawei.com>
Cc: Joerg Roedel <jroedel@suse.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/iova.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
index 3e1a8a6755723..41c605b0058f9 100644
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -577,7 +577,9 @@ void queue_iova(struct iova_domain *iovad,
 
 	spin_unlock_irqrestore(&fq->lock, flags);
 
-	if (atomic_cmpxchg(&iovad->fq_timer_on, 0, 1) == 0)
+	/* Avoid false sharing as much as possible. */
+	if (!atomic_read(&iovad->fq_timer_on) &&
+	    !atomic_cmpxchg(&iovad->fq_timer_on, 0, 1))
 		mod_timer(&iovad->fq_timer,
 			  jiffies + msecs_to_jiffies(IOVA_FQ_TIMEOUT));
 }
-- 
2.20.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 139/185] libtraceevent: Change users plugin directory
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (136 preceding siblings ...)
  2019-09-22 18:48   ` Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 140/185] ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks Sasha Levin
                   ` (45 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tzvetomir Stoyanov, Patrick McLean, Andrew Morton, Jiri Olsa,
	Namhyung Kim, linux-trace-devel, Steven Rostedt,
	Arnaldo Carvalho de Melo, Sasha Levin

From: Tzvetomir Stoyanov <tstoyanov@vmware.com>

[ Upstream commit e97fd1383cd77c467d2aed7fa4e596789df83977 ]

To be compliant with XDG user directory layout, the user's plugin
directory is changed from ~/.traceevent/plugins to
~/.local/lib/traceevent/plugins/

Suggested-by: Patrick McLean <chutzpah@gentoo.org>
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Patrick McLean <chutzpah@gentoo.org>
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/linux-trace-devel/20190313144206.41e75cf8@patrickm/
Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-4-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190805204355.344622683@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/traceevent/Makefile       | 6 +++---
 tools/lib/traceevent/event-plugin.c | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/lib/traceevent/Makefile b/tools/lib/traceevent/Makefile
index 3292c290654f6..86ce17a1f7fb6 100644
--- a/tools/lib/traceevent/Makefile
+++ b/tools/lib/traceevent/Makefile
@@ -62,15 +62,15 @@ set_plugin_dir := 1
 
 # Set plugin_dir to preffered global plugin location
 # If we install under $HOME directory we go under
-# $(HOME)/.traceevent/plugins
+# $(HOME)/.local/lib/traceevent/plugins
 #
 # We dont set PLUGIN_DIR in case we install under $HOME
 # directory, because by default the code looks under:
-# $(HOME)/.traceevent/plugins by default.
+# $(HOME)/.local/lib/traceevent/plugins by default.
 #
 ifeq ($(plugin_dir),)
 ifeq ($(prefix),$(HOME))
-override plugin_dir = $(HOME)/.traceevent/plugins
+override plugin_dir = $(HOME)/.local/lib/traceevent/plugins
 set_plugin_dir := 0
 else
 override plugin_dir = $(libdir)/traceevent/plugins
diff --git a/tools/lib/traceevent/event-plugin.c b/tools/lib/traceevent/event-plugin.c
index 8ca28de9337a5..e1f7ddd5a6cf0 100644
--- a/tools/lib/traceevent/event-plugin.c
+++ b/tools/lib/traceevent/event-plugin.c
@@ -18,7 +18,7 @@
 #include "event-utils.h"
 #include "trace-seq.h"
 
-#define LOCAL_PLUGIN_DIR ".traceevent/plugins"
+#define LOCAL_PLUGIN_DIR ".local/lib/traceevent/plugins/"
 
 static struct registered_plugin_options {
 	struct registered_plugin_options	*next;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 140/185] ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (137 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 139/185] libtraceevent: Change users plugin directory Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 141/185] x86/amd_nb: Add PCI device IDs for family 17h, model 70h Sasha Levin
                   ` (44 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Marek Szyprowski, Krzysztof Kozlowski, Sasha Levin, devicetree

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 5b0eeeaa37615df37a9a30929b73e9defe61ca84 ]

Commit aff138bf8e37 ("ARM: dts: exynos: Add TMU nodes regulator supply
for Peach boards") assigned LDO10 to Exynos Thermal Measurement Unit,
but it turned out that it supplies also some other critical parts and
board freezes/crashes when it is turned off.

The mentioned commit made Exynos TMU a consumer of that regulator and in
typical case Exynos TMU driver keeps it enabled from early boot. However
there are such configurations (example is multi_v7_defconfig), in which
some of the regulators are compiled as modules and are not available
from early boot. In such case it may happen that LDO10 is turned off by
regulator core, because it has no consumers yet (in this case consumer
drivers cannot get it, because the supply regulators for it are not yet
available). This in turn causes the board to crash. This patch restores
'always-on' property for the LDO10 regulator.

Fixes: aff138bf8e37 ("ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5420-peach-pit.dts | 1 +
 arch/arm/boot/dts/exynos5800-peach-pi.dts  | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index f78db6809cca4..9eb48cabcca45 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -440,6 +440,7 @@
 				regulator-name = "vdd_ldo10";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index e0f470fe54c81..4398f2d1fe881 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -440,6 +440,7 @@
 				regulator-name = "vdd_ldo10";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 141/185] x86/amd_nb: Add PCI device IDs for family 17h, model 70h
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (138 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 140/185] ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 142/185] ACPI: custom_method: fix memory leaks Sasha Levin
                   ` (43 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Marcel Bocu, Vicki Pfau, Thomas Gleixner, Brian Woods,
	Bjorn Helgaas, Ingo Molnar, Borislav Petkov, H. Peter Anvin, x86,
	Woods, Brian, Clemens Ladisch, Jean Delvare, Guenter Roeck,
	linux-hwmon, Sasha Levin, linux-pci

From: Marcel Bocu <marcel.p.bocu@gmail.com>

[ Upstream commit af4e1c5eca95bed1192d8dc45c8ed63aea2209e8 ]

The AMD Ryzen gen 3 processors came with a different PCI IDs for the
function 3 & 4 which are used to access the SMN interface. The root
PCI address however remained at the same address as the model 30h.

Adding the F3/F4 PCI IDs respectively to the misc and link ids appear
to be sufficient for k10temp, so let's add them and follow up on the
patch if other functions need more tweaking.

Vicki Pfau sent an identical patch after I checked that no-one had
written this patch. I would have been happy about dropping my patch but
unlike for his patch series, I had already Cc:ed the x86 people and
they already reviewed the changes. Since Vicki has not answered to
any email after his initial series, let's assume she is on vacation
and let's avoid duplication of reviews from the maintainers and merge
my series. To acknowledge Vicki's anteriority, I added her S-o-b to
the patch.

v2, suggested by Guenter Roeck and Brian Woods:
 - rename from 71h to 70h

Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Marcel Bocu <marcel.p.bocu@gmail.com>
Tested-by: Marcel Bocu <marcel.p.bocu@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Brian Woods <brian.woods@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>	# pci_ids.h

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: "Woods, Brian" <Brian.Woods@amd.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20190722174510.2179-1-marcel.p.bocu@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/amd_nb.c | 3 +++
 include/linux/pci_ids.h  | 1 +
 2 files changed, 4 insertions(+)

diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index 002aedc693933..8c26b696d8930 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -21,6 +21,7 @@
 #define PCI_DEVICE_ID_AMD_17H_DF_F4	0x1464
 #define PCI_DEVICE_ID_AMD_17H_M10H_DF_F4 0x15ec
 #define PCI_DEVICE_ID_AMD_17H_M30H_DF_F4 0x1494
+#define PCI_DEVICE_ID_AMD_17H_M70H_DF_F4 0x1444
 
 /* Protect the PCI config register pairs used for SMN and DF indirect access. */
 static DEFINE_MUTEX(smn_mutex);
@@ -50,6 +51,7 @@ const struct pci_device_id amd_nb_misc_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
 	{}
 };
 EXPORT_SYMBOL_GPL(amd_nb_misc_ids);
@@ -63,6 +65,7 @@ static const struct pci_device_id amd_nb_link_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F4) },
 	{}
 };
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 70e86148cb1e9..862556761bbf4 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -548,6 +548,7 @@
 #define PCI_DEVICE_ID_AMD_17H_DF_F3	0x1463
 #define PCI_DEVICE_ID_AMD_17H_M10H_DF_F3 0x15eb
 #define PCI_DEVICE_ID_AMD_17H_M30H_DF_F3 0x1493
+#define PCI_DEVICE_ID_AMD_17H_M70H_DF_F3 0x1443
 #define PCI_DEVICE_ID_AMD_CNB17H_F3	0x1703
 #define PCI_DEVICE_ID_AMD_LANCE		0x2000
 #define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 142/185] ACPI: custom_method: fix memory leaks
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (139 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 141/185] x86/amd_nb: Add PCI device IDs for family 17h, model 70h Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 143/185] ACPI / PCI: fix acpi_pci_irq_enable() memory leak Sasha Levin
                   ` (42 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Wenwen Wang, Rafael J . Wysocki, Sasha Levin, linux-acpi

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit 03d1571d9513369c17e6848476763ebbd10ec2cb ]

In cm_write(), 'buf' is allocated through kzalloc(). In the following
execution, if an error occurs, 'buf' is not deallocated, leading to memory
leaks. To fix this issue, free 'buf' before returning the error.

Fixes: 526b4af47f44 ("ACPI: Split out custom_method functionality into an own driver")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/custom_method.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/custom_method.c b/drivers/acpi/custom_method.c
index b2ef4c2ec955d..fd66a736621cf 100644
--- a/drivers/acpi/custom_method.c
+++ b/drivers/acpi/custom_method.c
@@ -49,8 +49,10 @@ static ssize_t cm_write(struct file *file, const char __user * user_buf,
 	if ((*ppos > max_size) ||
 	    (*ppos + count > max_size) ||
 	    (*ppos + count < count) ||
-	    (count > uncopied_bytes))
+	    (count > uncopied_bytes)) {
+		kfree(buf);
 		return -EINVAL;
+	}
 
 	if (copy_from_user(buf + (*ppos), user_buf, count)) {
 		kfree(buf);
@@ -70,6 +72,7 @@ static ssize_t cm_write(struct file *file, const char __user * user_buf,
 		add_taint(TAINT_OVERRIDDEN_ACPI_TABLE, LOCKDEP_NOW_UNRELIABLE);
 	}
 
+	kfree(buf);
 	return count;
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 143/185] ACPI / PCI: fix acpi_pci_irq_enable() memory leak
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (140 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 142/185] ACPI: custom_method: fix memory leaks Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 144/185] closures: fix a race on wakeup from closure_sync Sasha Levin
                   ` (41 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Wenwen Wang, Rafael J . Wysocki, Sasha Levin, linux-pci, linux-acpi

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit 29b49958cf73b439b17fa29e9a25210809a6c01c ]

In acpi_pci_irq_enable(), 'entry' is allocated by kzalloc() in
acpi_pci_irq_check_entry() (invoked from acpi_pci_irq_lookup()). However,
it is not deallocated if acpi_pci_irq_valid() returns false, leading to a
memory leak. To fix this issue, free 'entry' before returning 0.

Fixes: e237a5518425 ("x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected"")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/pci_irq.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index d2549ae65e1b6..dea8a60e18a4c 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -449,8 +449,10 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
 		 * No IRQ known to the ACPI subsystem - maybe the BIOS /
 		 * driver reported one, then use it. Exit in any case.
 		 */
-		if (!acpi_pci_irq_valid(dev, pin))
+		if (!acpi_pci_irq_valid(dev, pin)) {
+			kfree(entry);
 			return 0;
+		}
 
 		if (acpi_isa_register_gsi(dev))
 			dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 144/185] closures: fix a race on wakeup from closure_sync
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (141 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 143/185] ACPI / PCI: fix acpi_pci_irq_enable() memory leak Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 145/185] hwmon: (k10temp) Add support for AMD family 17h, model 70h CPUs Sasha Levin
                   ` (40 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Kent Overstreet, Coly Li, Jens Axboe, Sasha Levin, linux-bcache

From: Kent Overstreet <kent.overstreet@gmail.com>

[ Upstream commit a22a9602b88fabf10847f238ff81fde5f906fef7 ]

The race was when a thread using closure_sync() notices cl->s->done == 1
before the thread calling closure_put() calls wake_up_process(). Then,
it's possible for that thread to return and exit just before
wake_up_process() is called - so we're trying to wake up a process that
no longer exists.

rcu_read_lock() is sufficient to protect against this, as there's an rcu
barrier somewhere in the process teardown path.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/closure.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/md/bcache/closure.c b/drivers/md/bcache/closure.c
index 73f5319295bc9..c12cd809ab193 100644
--- a/drivers/md/bcache/closure.c
+++ b/drivers/md/bcache/closure.c
@@ -105,8 +105,14 @@ struct closure_syncer {
 
 static void closure_sync_fn(struct closure *cl)
 {
-	cl->s->done = 1;
-	wake_up_process(cl->s->task);
+	struct closure_syncer *s = cl->s;
+	struct task_struct *p;
+
+	rcu_read_lock();
+	p = READ_ONCE(s->task);
+	s->done = 1;
+	wake_up_process(p);
+	rcu_read_unlock();
 }
 
 void __sched __closure_sync(struct closure *cl)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 145/185] hwmon: (k10temp) Add support for AMD family 17h, model 70h CPUs
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (142 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 144/185] closures: fix a race on wakeup from closure_sync Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 146/185] hwmon: (acpi_power_meter) Change log level for 'unsafe software power cap' Sasha Levin
                   ` (39 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Marcel Bocu, Vicki Pfau, Thomas Gleixner, Ingo Molnar,
	Borislav Petkov, H. Peter Anvin, x86, Woods, Brian,
	Clemens Ladisch, Jean Delvare, Guenter Roeck, linux-hwmon,
	Sasha Levin

From: Marcel Bocu <marcel.p.bocu@gmail.com>

[ Upstream commit 12163cfbfc0f804cc7d27bc20e8d266ce7459260 ]

It would seem like model 70h is behaving in the same way as model 30h,
so let's just add the new F3 PCI ID to the list of compatible devices.

Unlike previous Ryzen/Threadripper, Ryzen gen 3 processors do not need
temperature offsets anymore. This has been reported in the press and
verified on my Ryzen 3700X by checking that the idle temperature
reported by k10temp is matching the temperature reported by the
firmware.

Vicki Pfau sent an identical patch after I checked that no-one had
written this patch. I would have been happy about dropping my patch but
unlike for his patch series, I had already Cc:ed the x86 people and
they already reviewed the changes. Since Vicki has not answered to
any email after his initial series, let's assume she is on vacation
and let's avoid duplication of reviews from the maintainers and merge
my series. To acknowledge Vicki's anteriority, I added her S-o-b to
the patch.

v2, suggested by Guenter Roeck and Brian Woods:
  - rename from 71h to 70h

Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Marcel Bocu <marcel.p.bocu@gmail.com>
Tested-by: Marcel Bocu <marcel.p.bocu@gmail.com>

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: "Woods, Brian" <Brian.Woods@amd.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20190722174653.2391-1-marcel.p.bocu@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/k10temp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index c77e89239dcd9..5c1dddde193c3 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -349,6 +349,7 @@ static const struct pci_device_id k10temp_id_table[] = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
 	{ PCI_VDEVICE(HYGON, PCI_DEVICE_ID_AMD_17H_DF_F3) },
 	{}
 };
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 146/185] hwmon: (acpi_power_meter) Change log level for 'unsafe software power cap'
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (143 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 145/185] hwmon: (k10temp) Add support for AMD family 17h, model 70h CPUs Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 147/185] md/raid1: fail run raid1 array when active disk less than one Sasha Levin
                   ` (38 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Wang Shenran, Guenter Roeck, Sasha Levin, linux-hwmon

From: Wang Shenran <shenran268@gmail.com>

[ Upstream commit 6e4d91aa071810deac2cd052161aefb376ecf04e ]

At boot time, the acpi_power_meter driver logs the following error level
message: "Ignoring unsafe software power cap". Having read about it from
a few sources, it seems that the error message can be quite misleading.

While the message can imply that Linux is ignoring the fact that the
system is operating in potentially dangerous conditions, the truth is
the driver found an ACPI_PMC object that supports software power
capping. The driver simply decides not to use it, perhaps because it
doesn't support the object.

The best solution is probably changing the log level from error to warning.
All sources I have found, regarding the error, have downplayed its
significance. There is not much of a reason for it to be on error level,
while causing potential confusions or misinterpretations.

Signed-off-by: Wang Shenran <shenran268@gmail.com>
Link: https://lore.kernel.org/r/20190724080110.6952-1-shenran268@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/acpi_power_meter.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c
index 6ba1a08253f0a..4cf25458f0b95 100644
--- a/drivers/hwmon/acpi_power_meter.c
+++ b/drivers/hwmon/acpi_power_meter.c
@@ -681,8 +681,8 @@ static int setup_attrs(struct acpi_power_meter_resource *resource)
 
 	if (resource->caps.flags & POWER_METER_CAN_CAP) {
 		if (!can_cap_in_hardware()) {
-			dev_err(&resource->acpi_dev->dev,
-				"Ignoring unsafe software power cap!\n");
+			dev_warn(&resource->acpi_dev->dev,
+				 "Ignoring unsafe software power cap!\n");
 			goto skip_unsafe_cap;
 		}
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 147/185] md/raid1: fail run raid1 array when active disk less than one
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (144 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 146/185] hwmon: (acpi_power_meter) Change log level for 'unsafe software power cap' Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 148/185] dmaengine: ti: edma: Do not reset reserved paRAM slots Sasha Levin
                   ` (37 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Yufen Yu, NeilBrown, Song Liu, Sasha Levin, linux-raid

From: Yufen Yu <yuyufen@huawei.com>

[ Upstream commit 07f1a6850c5d5a65c917c3165692b5179ac4cb6b ]

When run test case:
  mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal
  mdadm -S /dev/md1
  mdadm -A /dev/md1 /dev/sd[b-c] --run --force

  mdadm --zero /dev/sda
  mdadm /dev/md1 -a /dev/sda

  echo offline > /sys/block/sdc/device/state
  echo offline > /sys/block/sdb/device/state
  sleep 5
  mdadm -S /dev/md1

  echo running > /sys/block/sdb/device/state
  echo running > /sys/block/sdc/device/state
  mdadm -A /dev/md1 /dev/sd[a-c] --run --force

mdadm run fail with kernel message as follow:
[  172.986064] md: kicking non-fresh sdb from array!
[  173.004210] md: kicking non-fresh sdc from array!
[  173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[  173.022406] md1: failed to create bitmap (-5)

In fact, when active disk in raid1 array less than one, we
need to return fail in raid1_run().

Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid1.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index a26731a9b38e7..f393f0dc042fc 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -3096,6 +3096,13 @@ static int raid1_run(struct mddev *mddev)
 		    !test_bit(In_sync, &conf->mirrors[i].rdev->flags) ||
 		    test_bit(Faulty, &conf->mirrors[i].rdev->flags))
 			mddev->degraded++;
+	/*
+	 * RAID1 needs at least one disk in active
+	 */
+	if (conf->raid_disks - mddev->degraded < 1) {
+		ret = -EINVAL;
+		goto abort;
+	}
 
 	if (conf->raid_disks - mddev->degraded == 1)
 		mddev->recovery_cp = MaxSector;
@@ -3129,8 +3136,12 @@ static int raid1_run(struct mddev *mddev)
 	ret =  md_integrity_register(mddev);
 	if (ret) {
 		md_unregister_thread(&mddev->thread);
-		raid1_free(mddev, conf);
+		goto abort;
 	}
+	return 0;
+
+abort:
+	raid1_free(mddev, conf);
 	return ret;
 }
 
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 148/185] dmaengine: ti: edma: Do not reset reserved paRAM slots
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (145 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 147/185] md/raid1: fail run raid1 array when active disk less than one Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 149/185] kprobes: Prohibit probing on BUG() and WARN() address Sasha Levin
                   ` (36 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Peter Ujfalusi, Vinod Koul, Sasha Levin, dmaengine

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit c5dbe60664b3660f5ac5854e21273ea2e7ff698f ]

Skip resetting paRAM slots marked as reserved as they might be used by
other cores.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190823125618.8133-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ti/edma.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index ceabdea40ae0f..982631d4e1f8a 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -2273,9 +2273,6 @@ static int edma_probe(struct platform_device *pdev)
 
 	ecc->default_queue = info->default_queue;
 
-	for (i = 0; i < ecc->num_slots; i++)
-		edma_write_slot(ecc, i, &dummy_paramset);
-
 	if (info->rsv) {
 		/* Set the reserved slots in inuse list */
 		rsv_slots = info->rsv->rsv_slots;
@@ -2288,6 +2285,12 @@ static int edma_probe(struct platform_device *pdev)
 		}
 	}
 
+	for (i = 0; i < ecc->num_slots; i++) {
+		/* Reset only unused - not reserved - paRAM slots */
+		if (!test_bit(i, ecc->slot_inuse))
+			edma_write_slot(ecc, i, &dummy_paramset);
+	}
+
 	/* Clear the xbar mapped channels in unused list */
 	xbar_chans = info->xbar_chans;
 	if (xbar_chans) {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 149/185] kprobes: Prohibit probing on BUG() and WARN() address
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (146 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 148/185] dmaengine: ti: edma: Do not reset reserved paRAM slots Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 150/185] x86/mm: Fix cpumask_of_node() error condition Sasha Levin
                   ` (35 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Masami Hiramatsu, Steven Rostedt, Naveen N . Rao,
	Anil S Keshavamurthy, David S . Miller, Linus Torvalds,
	Naveen N . Rao, Peter Zijlstra, Thomas Gleixner, Ingo Molnar,
	Sasha Levin

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit e336b4027775cb458dc713745e526fa1a1996b2a ]

Since BUG() and WARN() may use a trap (e.g. UD2 on x86) to
get the address where the BUG() has occurred, kprobes can not
do single-step out-of-line that instruction. So prohibit
probing on such address.

Without this fix, if someone put a kprobe on WARN(), the
kernel will crash with invalid opcode error instead of
outputing warning message, because kernel can not find
correct bug address.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/156750890133.19112.3393666300746167111.stgit@devnote2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/bug.h | 5 +++++
 kernel/kprobes.c    | 3 ++-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/include/linux/bug.h b/include/linux/bug.h
index fe5916550da8c..f639bd0122f39 100644
--- a/include/linux/bug.h
+++ b/include/linux/bug.h
@@ -47,6 +47,11 @@ void generic_bug_clear_once(void);
 
 #else	/* !CONFIG_GENERIC_BUG */
 
+static inline void *find_bug(unsigned long bugaddr)
+{
+	return NULL;
+}
+
 static inline enum bug_trap_type report_bug(unsigned long bug_addr,
 					    struct pt_regs *regs)
 {
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 2504c269e6583..1010bde1146b5 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -1514,7 +1514,8 @@ static int check_kprobe_address_safe(struct kprobe *p,
 	/* Ensure it is not in reserved area nor out of text */
 	if (!kernel_text_address((unsigned long) p->addr) ||
 	    within_kprobe_blacklist((unsigned long) p->addr) ||
-	    jump_label_text_reserved(p->addr, p->addr)) {
+	    jump_label_text_reserved(p->addr, p->addr) ||
+	    find_bug((unsigned long)p->addr)) {
 		ret = -EINVAL;
 		goto out;
 	}
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 150/185] x86/mm: Fix cpumask_of_node() error condition
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (147 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 149/185] kprobes: Prohibit probing on BUG() and WARN() address Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48   ` Sasha Levin
                   ` (34 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Peter Zijlstra, Thomas Gleixner, Borislav Petkov, Yunsheng Lin,
	Ingo Molnar, Sasha Levin

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit bc04a049f058a472695aa22905d57e2b1f4c77d9 ]

When CONFIG_DEBUG_PER_CPU_MAPS=y we validate that the @node argument of
cpumask_of_node() is a valid node_id. It however forgets to check for
negative numbers. Fix this by explicitly casting to unsigned int.

  (unsigned)node >= nr_node_ids

verifies: 0 <= node < nr_node_ids

Also ammend the error message to match the condition.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lkml.kernel.org/r/20190903075352.GY2369@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/numa.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index e6dad600614c2..4123100e0eafe 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -861,9 +861,9 @@ void numa_remove_cpu(int cpu)
  */
 const struct cpumask *cpumask_of_node(int node)
 {
-	if (node >= nr_node_ids) {
+	if ((unsigned)node >= nr_node_ids) {
 		printk(KERN_WARNING
-			"cpumask_of_node(%d): node > nr_node_ids(%u)\n",
+			"cpumask_of_node(%d): (unsigned)node >= nr_node_ids(%u)\n",
 			node, nr_node_ids);
 		dump_stack();
 		return cpu_none_mask;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 151/185] irqchip/sifive-plic: set max threshold for ignored handlers
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
@ 2019-09-22 18:48   ` Sasha Levin
  2019-09-22 18:46 ` [PATCH AUTOSEL 5.2 003/185] cpufreq: ap806: Add NULL check after kcalloc Sasha Levin
                     ` (182 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Christoph Hellwig, Marc Zyngier, Paul Walmsley, Sasha Levin, linux-riscv

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 9ce06497c2722a0f9109e4cc3ce35b7a69617886 ]

When running in M-mode, the S-mode plic handlers are still listed in the
device tree.  Ignore them by setting the maximum threshold.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-sifive-plic.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index cf755964f2f8b..c72c036aea768 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -244,6 +244,7 @@ static int __init plic_init(struct device_node *node,
 		struct plic_handler *handler;
 		irq_hw_number_t hwirq;
 		int cpu, hartid;
+		u32 threshold = 0;
 
 		if (of_irq_parse_one(node, i, &parent)) {
 			pr_err("failed to parse parent for context %d.\n", i);
@@ -266,10 +267,16 @@ static int __init plic_init(struct device_node *node,
 			continue;
 		}
 
+		/*
+		 * When running in M-mode we need to ignore the S-mode handler.
+		 * Here we assume it always comes later, but that might be a
+		 * little fragile.
+		 */
 		handler = per_cpu_ptr(&plic_handlers, cpu);
 		if (handler->present) {
 			pr_warn("handler already present for context %d.\n", i);
-			continue;
+			threshold = 0xffffffff;
+			goto done;
 		}
 
 		handler->present = true;
@@ -279,8 +286,9 @@ static int __init plic_init(struct device_node *node,
 		handler->enable_base =
 			plic_regs + ENABLE_BASE + i * ENABLE_PER_HART;
 
+done:
 		/* priority must be > threshold to trigger an interrupt */
-		writel(0, handler->hart_base + CONTEXT_THRESHOLD);
+		writel(threshold, handler->hart_base + CONTEXT_THRESHOLD);
 		for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
 			plic_toggle(handler, hwirq, 0);
 		nr_handlers++;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 151/185] irqchip/sifive-plic: set max threshold for ignored handlers
@ 2019-09-22 18:48   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Marc Zyngier, linux-riscv, Christoph Hellwig, Paul Walmsley

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 9ce06497c2722a0f9109e4cc3ce35b7a69617886 ]

When running in M-mode, the S-mode plic handlers are still listed in the
device tree.  Ignore them by setting the maximum threshold.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-sifive-plic.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index cf755964f2f8b..c72c036aea768 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -244,6 +244,7 @@ static int __init plic_init(struct device_node *node,
 		struct plic_handler *handler;
 		irq_hw_number_t hwirq;
 		int cpu, hartid;
+		u32 threshold = 0;
 
 		if (of_irq_parse_one(node, i, &parent)) {
 			pr_err("failed to parse parent for context %d.\n", i);
@@ -266,10 +267,16 @@ static int __init plic_init(struct device_node *node,
 			continue;
 		}
 
+		/*
+		 * When running in M-mode we need to ignore the S-mode handler.
+		 * Here we assume it always comes later, but that might be a
+		 * little fragile.
+		 */
 		handler = per_cpu_ptr(&plic_handlers, cpu);
 		if (handler->present) {
 			pr_warn("handler already present for context %d.\n", i);
-			continue;
+			threshold = 0xffffffff;
+			goto done;
 		}
 
 		handler->present = true;
@@ -279,8 +286,9 @@ static int __init plic_init(struct device_node *node,
 		handler->enable_base =
 			plic_regs + ENABLE_BASE + i * ENABLE_PER_HART;
 
+done:
 		/* priority must be > threshold to trigger an interrupt */
-		writel(0, handler->hart_base + CONTEXT_THRESHOLD);
+		writel(threshold, handler->hart_base + CONTEXT_THRESHOLD);
 		for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
 			plic_toggle(handler, hwirq, 0);
 		nr_handlers++;
-- 
2.20.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 152/185] s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (149 preceding siblings ...)
  2019-09-22 18:48   ` Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 153/185] irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices Sasha Levin
                   ` (32 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Harald Freudenberger, Vasily Gorbik, Sasha Levin, linux-crypto,
	linux-s390

From: Harald Freudenberger <freude@linux.ibm.com>

[ Upstream commit 9e323d45ba94262620a073a3f9945ca927c07c71 ]

With 'extra run-time crypto self tests' enabled, the selftest
for s390-xts fails with

  alg: skcipher: xts-aes-s390 encryption unexpectedly succeeded on
  test vector "random: len=0 klen=64"; expected_error=-22,
  cfg="random: inplace use_digest nosimd src_divs=[2.61%@+4006,
  84.44%@+21, 1.55%@+13, 4.50%@+344, 4.26%@+21, 2.64%@+27]"

This special case with nbytes=0 is not handled correctly and this
fix now makes sure that -EINVAL is returned when there is en/decrypt
called with 0 bytes to en/decrypt.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/crypto/aes_s390.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index d00f84add5f4c..6d2dbb5089d5c 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -586,6 +586,9 @@ static int xts_aes_encrypt(struct blkcipher_desc *desc,
 	struct s390_xts_ctx *xts_ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
+	if (!nbytes)
+		return -EINVAL;
+
 	if (unlikely(!xts_ctx->fc))
 		return xts_fallback_encrypt(desc, dst, src, nbytes);
 
@@ -600,6 +603,9 @@ static int xts_aes_decrypt(struct blkcipher_desc *desc,
 	struct s390_xts_ctx *xts_ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
+	if (!nbytes)
+		return -EINVAL;
+
 	if (unlikely(!xts_ctx->fc))
 		return xts_fallback_decrypt(desc, dst, src, nbytes);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 153/185] irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (150 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 152/185] s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 154/185] x86/platform/uv: Fix kmalloc() NULL check routine Sasha Levin
                   ` (31 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Marc Zyngier, Jiaxing Luo, John Garry, Sasha Levin

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit c9c96e30ecaa0aafa225aa1a5392cb7db17c7a82 ]

When allocating a range of LPIs for a Multi-MSI capable device,
this allocation extended to the closest power of 2.

But on the release path, the interrupts are released one by
one. This results in not releasing the "extra" range, leaking
the its_device. Trying to reprobe the device will then fail.

Fix it by releasing the LPIs the same way we allocate them.

Fixes: 8208d1708b88 ("irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size")
Reported-by: Jiaxing Luo <luojiaxing@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/f5e948aa-e32f-3f74-ae30-31fee06c2a74@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 20e5482d91b94..fca8b90028522 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -2641,14 +2641,13 @@ static void its_irq_domain_free(struct irq_domain *domain, unsigned int virq,
 	struct its_node *its = its_dev->its;
 	int i;
 
+	bitmap_release_region(its_dev->event_map.lpi_map,
+			      its_get_event_id(irq_domain_get_irq_data(domain, virq)),
+			      get_count_order(nr_irqs));
+
 	for (i = 0; i < nr_irqs; i++) {
 		struct irq_data *data = irq_domain_get_irq_data(domain,
 								virq + i);
-		u32 event = its_get_event_id(data);
-
-		/* Mark interrupt index as unused */
-		clear_bit(event, its_dev->event_map.lpi_map);
-
 		/* Nuke the entry in the domain */
 		irq_domain_reset_irq_data(data);
 	}
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 154/185] x86/platform/uv: Fix kmalloc() NULL check routine
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (151 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 153/185] irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 20:26   ` Greg KH
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 155/185] x86/cpu: Add Tiger Lake to Intel family Sasha Levin
                   ` (30 subsequent siblings)
  183 siblings, 1 reply; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Austin Kim, Dimitri Sivanich, Hedi Berriche, Linus Torvalds,
	Mike Travis, Peter Zijlstra, Russ Anderson, Steve Wahl,
	Thomas Gleixner, allison, andy, armijn, bp, dvhart, gregkh, hpa,
	kjlu, platform-driver-x86, Ingo Molnar, Sasha Levin

From: Austin Kim <austindh.kim@gmail.com>

[ Upstream commit 864b23f0169d5bff677e8443a7a90dfd6b090afc ]

The result of kmalloc() should have been checked ahead of below statement:

	pqp = (struct bau_pq_entry *)vp;

Move BUG_ON(!vp) before above statement.

Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Hedi Berriche <hedi.berriche@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Steve Wahl <steve.wahl@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: allison@lohutok.net
Cc: andy@infradead.org
Cc: armijn@tjaldur.nl
Cc: bp@alien8.de
Cc: dvhart@infradead.org
Cc: gregkh@linuxfoundation.org
Cc: hpa@zytor.com
Cc: kjlu@umn.edu
Cc: platform-driver-x86@vger.kernel.org
Link: https://lkml.kernel.org/r/20190905232951.GA28779@LGEARND20B15
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/platform/uv/tlb_uv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 0c7dfec4acac8..5a66d73620ce4 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1815,9 +1815,9 @@ static void pq_init(int node, int pnode)
 
 	plsize = (DEST_Q_SIZE + 1) * sizeof(struct bau_pq_entry);
 	vp = kmalloc_node(plsize, GFP_KERNEL, node);
-	pqp = (struct bau_pq_entry *)vp;
-	BUG_ON(!pqp);
+	BUG_ON(!vp);
 
+	pqp = (struct bau_pq_entry *)vp;
 	cp = (char *)pqp + 31;
 	pqp = (struct bau_pq_entry *)(((unsigned long)cp >> 5) << 5);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 155/185] x86/cpu: Add Tiger Lake to Intel family
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (152 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 154/185] x86/platform/uv: Fix kmalloc() NULL check routine Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 156/185] platform/x86: intel_pmc_core: Do not ioremap RAM Sasha Levin
                   ` (29 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Gayatri Kammela, Tony Luck, Linus Torvalds, Peter Zijlstra,
	Rahul Tanwar, Thomas Gleixner, Ingo Molnar, Sasha Levin

From: Gayatri Kammela <gayatri.kammela@intel.com>

[ Upstream commit 6e1c32c5dbb4b90eea8f964c2869d0bde050dbe0 ]

Add the model numbers/CPUIDs of Tiger Lake mobile and desktop to the
Intel family.

Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190905193020.14707-2-tony.luck@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/intel-family.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h
index f60ddd655c787..82a57d344b9bc 100644
--- a/arch/x86/include/asm/intel-family.h
+++ b/arch/x86/include/asm/intel-family.h
@@ -58,6 +58,9 @@
 #define INTEL_FAM6_ICELAKE_MOBILE	0x7E
 #define INTEL_FAM6_ICELAKE_NNPI		0x9D
 
+#define INTEL_FAM6_TIGERLAKE_L		0x8C
+#define INTEL_FAM6_TIGERLAKE		0x8D
+
 /* "Small Core" Processors (Atom) */
 
 #define INTEL_FAM6_ATOM_BONNELL		0x1C /* Diamondville, Pineview */
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 156/185] platform/x86: intel_pmc_core: Do not ioremap RAM
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (153 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 155/185] x86/cpu: Add Tiger Lake to Intel family Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 157/185] ASoC: es8316: support fixed and variable both clock rates Sasha Levin
                   ` (28 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: M. Vefa Bicakci, Andy Shevchenko, Sasha Levin, platform-driver-x86

From: "M. Vefa Bicakci" <m.v.b@runbox.com>

[ Upstream commit 7d505758b1e556cdf65a5e451744fe0ae8063d17 ]

On a Xen-based PVH virtual machine with more than 4 GiB of RAM,
intel_pmc_core fails initialization with the following warning message
from the kernel, indicating that the driver is attempting to ioremap
RAM:

  ioremap on RAM at 0x00000000fe000000 - 0x00000000fe001fff
  WARNING: CPU: 1 PID: 434 at arch/x86/mm/ioremap.c:186 __ioremap_caller.constprop.0+0x2aa/0x2c0
...
  Call Trace:
   ? pmc_core_probe+0x87/0x2d0 [intel_pmc_core]
   pmc_core_probe+0x87/0x2d0 [intel_pmc_core]

This issue appears to manifest itself because of the following fallback
mechanism in the driver:

	if (lpit_read_residency_count_address(&slp_s0_addr))
		pmcdev->base_addr = PMC_BASE_ADDR_DEFAULT;

The validity of address PMC_BASE_ADDR_DEFAULT (i.e., 0xFE000000) is not
verified by the driver, which is what this patch introduces. With this
patch, if address PMC_BASE_ADDR_DEFAULT is in RAM, then the driver will
not attempt to ioremap the aforementioned address.

Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel_pmc_core.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
index be6cda89dcf5b..01a530e2f8017 100644
--- a/drivers/platform/x86/intel_pmc_core.c
+++ b/drivers/platform/x86/intel_pmc_core.c
@@ -882,10 +882,14 @@ static int pmc_core_probe(struct platform_device *pdev)
 	if (pmcdev->map == &spt_reg_map && !pci_dev_present(pmc_pci_ids))
 		pmcdev->map = &cnp_reg_map;
 
-	if (lpit_read_residency_count_address(&slp_s0_addr))
+	if (lpit_read_residency_count_address(&slp_s0_addr)) {
 		pmcdev->base_addr = PMC_BASE_ADDR_DEFAULT;
-	else
+
+		if (page_is_ram(PHYS_PFN(pmcdev->base_addr)))
+			return -ENODEV;
+	} else {
 		pmcdev->base_addr = slp_s0_addr - pmcdev->map->slp_s0_offset;
+	}
 
 	pmcdev->regbase = ioremap(pmcdev->base_addr,
 				  pmcdev->map->regmap_length);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 157/185] ASoC: es8316: support fixed and variable both clock rates
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (154 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 156/185] platform/x86: intel_pmc_core: Do not ioremap RAM Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 158/185] SoC: simple-card-utils: set 0Hz to sysclk when shutdown Sasha Levin
                   ` (27 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Katsuhiro Suzuki, Mark Brown, Sasha Levin

From: Katsuhiro Suzuki <katsuhiro@katsuster.net>

[ Upstream commit ebe02a5b9ef05e3b812af3d628cdf6206d9ba610 ]

This patch supports some type of machine drivers that set 0 to mclk
when sound device goes to idle state. After applied this patch,
sysclk == 0 means there is no constraint of sound rate and other
values will set constraints which is derived by sysclk setting.

Original code refuses sysclk == 0 setting. But some boards and SoC
(such as RockPro64 and RockChip I2S) has connected SoC MCLK out to
ES8316 MCLK in. In this case, SoC side I2S will choose suitable
frequency of MCLK such as fs * mclk-fs when user starts playing or
capturing.

Bad scenario as follows (mclk-fs = 256):
  - Initialize sysclk by correct value (Ex. 12.288MHz)
    - ES8316 set constraints of PCM rate by sysclk
      48kHz (1/256), 32kHz (1/384), 30.720kHz (1/400),
      24kHz (1/512), 16kHz (1/768), 12kHz (1/1024)
  - Play 48kHz sound, it's acceptable
  - Sysclk is not changed

  - Play 32kHz sound, it's acceptable
  - Set sysclk by 8.192MHz (= fs * mclk-fs = 32k * 256)
    - ES8316 set constraints of PCM rate by sysclk
      32kHz (1/256), 21.33kHz (1/384), 20.48kHz (1/400),
      16kHz (1/512), 10.66kHz (1/768), 8kHz (1/1024)

  - Play 48kHz again, but it's NOT acceptable because constraints
    list does not allow 48kHz

Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907163653.9382-2-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/es8316.c | 35 ++++++++++++++++++++---------------
 1 file changed, 20 insertions(+), 15 deletions(-)

diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c
index 96d04896193f2..c47b3c4bb06c7 100644
--- a/sound/soc/codecs/es8316.c
+++ b/sound/soc/codecs/es8316.c
@@ -368,8 +368,12 @@ static int es8316_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 
 	es8316->sysclk = freq;
 
-	if (freq == 0)
+	if (freq == 0) {
+		es8316->sysclk_constraints.list = NULL;
+		es8316->sysclk_constraints.count = 0;
+
 		return 0;
+	}
 
 	/* Limit supported sample rates to ones that can be autodetected
 	 * by the codec running in slave mode.
@@ -444,17 +448,10 @@ static int es8316_pcm_startup(struct snd_pcm_substream *substream,
 	struct snd_soc_component *component = dai->component;
 	struct es8316_priv *es8316 = snd_soc_component_get_drvdata(component);
 
-	if (es8316->sysclk == 0) {
-		dev_err(component->dev, "No sysclk provided\n");
-		return -EINVAL;
-	}
-
-	/* The set of sample rates that can be supported depends on the
-	 * MCLK supplied to the CODEC.
-	 */
-	snd_pcm_hw_constraint_list(substream->runtime, 0,
-				   SNDRV_PCM_HW_PARAM_RATE,
-				   &es8316->sysclk_constraints);
+	if (es8316->sysclk_constraints.list)
+		snd_pcm_hw_constraint_list(substream->runtime, 0,
+					   SNDRV_PCM_HW_PARAM_RATE,
+					   &es8316->sysclk_constraints);
 
 	return 0;
 }
@@ -466,11 +463,19 @@ static int es8316_pcm_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_component *component = dai->component;
 	struct es8316_priv *es8316 = snd_soc_component_get_drvdata(component);
 	u8 wordlen = 0;
+	int i;
 
-	if (!es8316->sysclk) {
-		dev_err(component->dev, "No MCLK configured\n");
-		return -EINVAL;
+	/* Validate supported sample rates that are autodetected from MCLK */
+	for (i = 0; i < NR_SUPPORTED_MCLK_LRCK_RATIOS; i++) {
+		const unsigned int ratio = supported_mclk_lrck_ratios[i];
+
+		if (es8316->sysclk % ratio != 0)
+			continue;
+		if (es8316->sysclk / ratio == params_rate(params))
+			break;
 	}
+	if (i == NR_SUPPORTED_MCLK_LRCK_RATIOS)
+		return -EINVAL;
 
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S16_LE:
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 158/185] SoC: simple-card-utils: set 0Hz to sysclk when shutdown
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (155 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 157/185] ASoC: es8316: support fixed and variable both clock rates Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 159/185] ASoC: dmaengine: Make the pcm->name equal to pcm->id if the name is not set Sasha Levin
                   ` (26 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Katsuhiro Suzuki, Mark Brown, Sasha Levin

From: Katsuhiro Suzuki <katsuhiro@katsuster.net>

[ Upstream commit 2458adb8f92ad4d07ef7ab27c5bafa1d3f4678d6 ]

This patch set 0Hz to sysclk when shutdown the card.

Some codecs set rate constraints that derives from sysclk. This
mechanism works correctly if machine drivers give fixed frequency.

But simple-audio and audio-graph card set variable clock rate if
'mclk-fs' property exists. In this case, rate constraints will go
bad scenario. For example a codec accepts three limited rates
(mclk / 256, mclk / 384, mclk / 512).

Bad scenario as follows (mclk-fs = 256):
   - Initialize sysclk by correct value (Ex. 12.288MHz)
     - Codec set constraints of PCM rate by sysclk
       48kHz (1/256), 32kHz (1/384), 24kHz (1/512)
   - Play 48kHz sound, it's acceptable
   - Sysclk is not changed

   - Play 32kHz sound, it's acceptable
   - Set sysclk to 8.192MHz (= fs * mclk-fs = 32k * 256)
     - Codec set constraints of PCM rate by sysclk
       32kHz (1/256), 21.33kHz (1/384), 16kHz (1/512)

   - Play 48kHz again, but it's NOT acceptable because constraints
     do not allow 48kHz

So codecs treat 0Hz sysclk as signal of applying no constraints to
avoid this problem.

Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907174501.19833-1-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/generic/simple-card-utils.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index f4c6375d11c7a..ef1adf87cbc8b 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -224,10 +224,17 @@ EXPORT_SYMBOL_GPL(asoc_simple_startup);
 void asoc_simple_shutdown(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
 	struct asoc_simple_priv *priv = snd_soc_card_get_drvdata(rtd->card);
 	struct simple_dai_props *dai_props =
 		simple_priv_to_props(priv, rtd->num);
 
+	if (dai_props->mclk_fs) {
+		snd_soc_dai_set_sysclk(codec_dai, 0, 0, SND_SOC_CLOCK_IN);
+		snd_soc_dai_set_sysclk(cpu_dai, 0, 0, SND_SOC_CLOCK_OUT);
+	}
+
 	asoc_simple_clk_disable(dai_props->cpu_dai);
 
 	asoc_simple_clk_disable(dai_props->codec_dai);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 159/185] ASoC: dmaengine: Make the pcm->name equal to pcm->id if the name is not set
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (156 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 158/185] SoC: simple-card-utils: set 0Hz to sysclk when shutdown Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 160/185] io_uring: fix wrong sequence setting logic Sasha Levin
                   ` (25 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Peter Ujfalusi, Arthur She, Mark Brown, Sasha Levin

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 2ec42f3147e1610716f184b02e65d7f493eed925 ]

Some tools use the snd_pcm_info_get_name() to try to identify PCMs or for
other purposes.

Currently it is left empty with the dmaengine-pcm, in this case copy the
pcm->id string as pcm->name.

For example IGT is using this to find the HDMI PCM for testing audio on it.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reported-by: Arthur She <arthur.she@linaro.org>
Link: https://lore.kernel.org/r/20190906055524.7393-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-generic-dmaengine-pcm.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
index 748f5f641002e..d93db2c2b5270 100644
--- a/sound/soc/soc-generic-dmaengine-pcm.c
+++ b/sound/soc/soc-generic-dmaengine-pcm.c
@@ -306,6 +306,12 @@ static int dmaengine_pcm_new(struct snd_soc_pcm_runtime *rtd)
 
 		if (!dmaengine_pcm_can_report_residue(dev, pcm->chan[i]))
 			pcm->flags |= SND_DMAENGINE_PCM_FLAG_NO_RESIDUE;
+
+		if (rtd->pcm->streams[i].pcm->name[0] == '\0') {
+			strncpy(rtd->pcm->streams[i].pcm->name,
+				rtd->pcm->streams[i].pcm->id,
+				sizeof(rtd->pcm->streams[i].pcm->name));
+		}
 	}
 
 	return 0;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 160/185] io_uring: fix wrong sequence setting logic
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (157 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 159/185] ASoC: dmaengine: Make the pcm->name equal to pcm->id if the name is not set Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 161/185] block: make rq sector size accessible for block stats Sasha Levin
                   ` (24 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Jackie Liu, Jens Axboe, Sasha Levin, linux-fsdevel

From: Jackie Liu <liuyun01@kylinos.cn>

[ Upstream commit 8776f3fa15a5cd213c4dfab7ddaf557983374ea6 ]

Sqo_thread will get sqring in batches, which will cause
ctx->cached_sq_head to be added in batches. if one of these
sqes is set with the DRAIN flag, then he will never get a
chance to process, and finally sqo_thread will not exit.

Fixes: de0617e4671 ("io_uring: add support for marking commands as draining")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/io_uring.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/io_uring.c b/fs/io_uring.c
index 03cd8f5bba850..701936f2bde39 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -288,6 +288,7 @@ struct io_ring_ctx {
 struct sqe_submit {
 	const struct io_uring_sqe	*sqe;
 	unsigned short			index;
+	u32				sequence;
 	bool				has_user;
 	bool				needs_lock;
 	bool				needs_fixed_file;
@@ -1894,7 +1895,7 @@ static int io_req_set_file(struct io_ring_ctx *ctx, const struct sqe_submit *s,
 
 	if (flags & IOSQE_IO_DRAIN) {
 		req->flags |= REQ_F_IO_DRAIN;
-		req->sequence = ctx->cached_sq_head - 1;
+		req->sequence = s->sequence;
 	}
 
 	if (!io_op_needs_file(s->sqe))
@@ -2050,6 +2051,7 @@ static bool io_get_sqring(struct io_ring_ctx *ctx, struct sqe_submit *s)
 	if (head < ctx->sq_entries) {
 		s->index = head;
 		s->sqe = &ctx->sq_sqes[head];
+		s->sequence = ctx->cached_sq_head;
 		ctx->cached_sq_head++;
 		return true;
 	}
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 161/185] block: make rq sector size accessible for block stats
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (158 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 160/185] io_uring: fix wrong sequence setting logic Sasha Levin
@ 2019-09-22 18:48 ` Sasha Levin
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 162/185] raid5: don't set STRIPE_HANDLE to stripe which is in batch list Sasha Levin
                   ` (23 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:48 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hou Tao, Pavel Begunkov, Jens Axboe, Sasha Levin, linux-block

From: Hou Tao <houtao1@huawei.com>

[ Upstream commit 3d24430694077313c75c6b89f618db09943621e4 ]

Currently rq->data_len will be decreased by partial completion or
zeroed by completion, so when blk_stat_add() is invoked, data_len
will be zero and there will never be samples in poll_cb because
blk_mq_poll_stats_bkt() will return -1 if data_len is zero.

We could move blk_stat_add() back to __blk_mq_complete_request(),
but that would make the effort of trying to call ktime_get_ns()
once in vain. Instead we can reuse throtl_size field, and use
it for both block stats and block throttle, and adjust the
logic in blk_mq_poll_stats_bkt() accordingly.

Fixes: 4bc6339a583c ("block: move blk_stat_add() to __blk_mq_end_request()")
Tested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq.c         | 11 +++++------
 block/blk-throttle.c   |  3 ++-
 include/linux/blkdev.h | 15 ++++++++++++---
 3 files changed, 19 insertions(+), 10 deletions(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index f934e8afe5b43..af93ca28ce4f0 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -44,12 +44,12 @@ static void blk_mq_poll_stats_fn(struct blk_stat_callback *cb);
 
 static int blk_mq_poll_stats_bkt(const struct request *rq)
 {
-	int ddir, bytes, bucket;
+	int ddir, sectors, bucket;
 
 	ddir = rq_data_dir(rq);
-	bytes = blk_rq_bytes(rq);
+	sectors = blk_rq_stats_sectors(rq);
 
-	bucket = ddir + 2*(ilog2(bytes) - 9);
+	bucket = ddir + 2 * ilog2(sectors);
 
 	if (bucket < 0)
 		return -1;
@@ -330,6 +330,7 @@ static struct request *blk_mq_rq_ctx_init(struct blk_mq_alloc_data *data,
 	else
 		rq->start_time_ns = 0;
 	rq->io_start_time_ns = 0;
+	rq->stats_sectors = 0;
 	rq->nr_phys_segments = 0;
 #if defined(CONFIG_BLK_DEV_INTEGRITY)
 	rq->nr_integrity_segments = 0;
@@ -679,9 +680,7 @@ void blk_mq_start_request(struct request *rq)
 
 	if (test_bit(QUEUE_FLAG_STATS, &q->queue_flags)) {
 		rq->io_start_time_ns = ktime_get_ns();
-#ifdef CONFIG_BLK_DEV_THROTTLING_LOW
-		rq->throtl_size = blk_rq_sectors(rq);
-#endif
+		rq->stats_sectors = blk_rq_sectors(rq);
 		rq->rq_flags |= RQF_STATS;
 		rq_qos_issue(q, rq);
 	}
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 8ab6c81532236..ee74bffe3504d 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -2246,7 +2246,8 @@ void blk_throtl_stat_add(struct request *rq, u64 time_ns)
 	struct request_queue *q = rq->q;
 	struct throtl_data *td = q->td;
 
-	throtl_track_latency(td, rq->throtl_size, req_op(rq), time_ns >> 10);
+	throtl_track_latency(td, blk_rq_stats_sectors(rq), req_op(rq),
+			     time_ns >> 10);
 }
 
 void blk_throtl_bio_endio(struct bio *bio)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 93baef66b9424..4c6754e536725 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -202,9 +202,12 @@ struct request {
 #ifdef CONFIG_BLK_WBT
 	unsigned short wbt_flags;
 #endif
-#ifdef CONFIG_BLK_DEV_THROTTLING_LOW
-	unsigned short throtl_size;
-#endif
+	/*
+	 * rq sectors used for blk stats. It has the same value
+	 * with blk_rq_sectors(rq), except that it never be zeroed
+	 * by completion.
+	 */
+	unsigned short stats_sectors;
 
 	/*
 	 * Number of scatter-gather DMA addr+len pairs after
@@ -902,6 +905,7 @@ static inline struct request_queue *bdev_get_queue(struct block_device *bdev)
  * blk_rq_err_bytes()		: bytes left till the next error boundary
  * blk_rq_sectors()		: sectors left in the entire request
  * blk_rq_cur_sectors()		: sectors left in the current segment
+ * blk_rq_stats_sectors()	: sectors of the entire request used for stats
  */
 static inline sector_t blk_rq_pos(const struct request *rq)
 {
@@ -930,6 +934,11 @@ static inline unsigned int blk_rq_cur_sectors(const struct request *rq)
 	return blk_rq_cur_bytes(rq) >> SECTOR_SHIFT;
 }
 
+static inline unsigned int blk_rq_stats_sectors(const struct request *rq)
+{
+	return rq->stats_sectors;
+}
+
 #ifdef CONFIG_BLK_DEV_ZONED
 static inline unsigned int blk_rq_zone_no(struct request *rq)
 {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 162/185] raid5: don't set STRIPE_HANDLE to stripe which is in batch list
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (159 preceding siblings ...)
  2019-09-22 18:48 ` [PATCH AUTOSEL 5.2 161/185] block: make rq sector size accessible for block stats Sasha Levin
@ 2019-09-22 18:49 ` Sasha Levin
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 163/185] mmc: core: Clarify sdio_irq_pending flag for MMC_CAP2_SDIO_IRQ_NOTHREAD Sasha Levin
                   ` (22 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Guoqing Jiang, Song Liu, Sasha Levin, linux-raid

From: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>

[ Upstream commit 6ce220dd2f8ea71d6afc29b9a7524c12e39f374a ]

If stripe in batch list is set with STRIPE_HANDLE flag, then the stripe
could be set with STRIPE_ACTIVE by the handle_stripe function. And if
error happens to the batch_head at the same time, break_stripe_batch_list
is called, then below warning could happen (the same report in [1]), it
means a member of batch list was set with STRIPE_ACTIVE.

[7028915.431770] stripe state: 2001
[7028915.431815] ------------[ cut here ]------------
[7028915.431828] WARNING: CPU: 18 PID: 29089 at drivers/md/raid5.c:4614 break_stripe_batch_list+0x203/0x240 [raid456]
[...]
[7028915.431879] CPU: 18 PID: 29089 Comm: kworker/u82:5 Tainted: G           O    4.14.86-1-storage #4.14.86-1.2~deb9
[7028915.431881] Hardware name: Supermicro SSG-2028R-ACR24L/X10DRH-iT, BIOS 3.1 06/18/2018
[7028915.431888] Workqueue: raid5wq raid5_do_work [raid456]
[7028915.431890] task: ffff9ab0ef36d7c0 task.stack: ffffb72926f84000
[7028915.431896] RIP: 0010:break_stripe_batch_list+0x203/0x240 [raid456]
[7028915.431898] RSP: 0018:ffffb72926f87ba8 EFLAGS: 00010286
[7028915.431900] RAX: 0000000000000012 RBX: ffff9aaa84a98000 RCX: 0000000000000000
[7028915.431901] RDX: 0000000000000000 RSI: ffff9ab2bfa15458 RDI: ffff9ab2bfa15458
[7028915.431902] RBP: ffff9aaa8fb4e900 R08: 0000000000000001 R09: 0000000000002eb4
[7028915.431903] R10: 00000000ffffffff R11: 0000000000000000 R12: ffff9ab1736f1b00
[7028915.431904] R13: 0000000000000000 R14: ffff9aaa8fb4e900 R15: 0000000000000001
[7028915.431906] FS:  0000000000000000(0000) GS:ffff9ab2bfa00000(0000) knlGS:0000000000000000
[7028915.431907] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[7028915.431908] CR2: 00007ff953b9f5d8 CR3: 0000000bf4009002 CR4: 00000000003606e0
[7028915.431909] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[7028915.431910] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[7028915.431910] Call Trace:
[7028915.431923]  handle_stripe+0x8e7/0x2020 [raid456]
[7028915.431930]  ? __wake_up_common_lock+0x89/0xc0
[7028915.431935]  handle_active_stripes.isra.58+0x35f/0x560 [raid456]
[7028915.431939]  raid5_do_work+0xc6/0x1f0 [raid456]

Also commit 59fc630b8b5f9f ("RAID5: batch adjacent full stripe write")
said "If a stripe is added to batch list, then only the first stripe
of the list should be put to handle_list and run handle_stripe."

So don't set STRIPE_HANDLE to stripe which is already in batch list,
otherwise the stripe could be put to handle_list and run handle_stripe,
then the above warning could be triggered.

[1]. https://www.spinics.net/lists/raid/msg62552.html

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid5.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index da94cbaa1a9ed..8d2811e436b93 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5719,7 +5719,8 @@ static bool raid5_make_request(struct mddev *mddev, struct bio * bi)
 				do_flush = false;
 			}
 
-			set_bit(STRIPE_HANDLE, &sh->state);
+			if (!sh->batch_head)
+				set_bit(STRIPE_HANDLE, &sh->state);
 			clear_bit(STRIPE_DELAYED, &sh->state);
 			if ((!sh->batch_head || sh == sh->batch_head) &&
 			    (bi->bi_opf & REQ_SYNC) &&
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 163/185] mmc: core: Clarify sdio_irq_pending flag for MMC_CAP2_SDIO_IRQ_NOTHREAD
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (160 preceding siblings ...)
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 162/185] raid5: don't set STRIPE_HANDLE to stripe which is in batch list Sasha Levin
@ 2019-09-22 18:49 ` Sasha Levin
  2019-09-22 18:49   ` Sasha Levin
                   ` (21 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ulf Hansson, Matthias Kaehlcke, Douglas Anderson, Sasha Levin, linux-mmc

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit 36d57efb4af534dd6b442ea0b9a04aa6dfa37abe ]

The sdio_irq_pending flag is used to let host drivers indicate that it has
signaled an IRQ. If that is the case and we only have a single SDIO func
that have claimed an SDIO IRQ, our assumption is that we can avoid reading
the SDIO_CCCR_INTx register and just call the SDIO func irq handler
immediately. This makes sense, but the flag is set/cleared in a somewhat
messy order, let's fix that up according to below.

First, the flag is currently set in sdio_run_irqs(), which is executed as a
work that was scheduled from sdio_signal_irq(). To make it more implicit
that the host have signaled an IRQ, let's instead immediately set the flag
in sdio_signal_irq(). This also makes the behavior consistent with host
drivers that uses the legacy, mmc_signal_sdio_irq() API. This have no
functional impact, because we don't expect host drivers to call
sdio_signal_irq() until after the work (sdio_run_irqs()) have been executed
anyways.

Second, currently we never clears the flag when using the sdio_run_irqs()
work, but only when using the sdio_irq_thread(). Let make the behavior
consistent, by moving the flag to be cleared inside the common
process_sdio_pending_irqs() function. Additionally, tweak the behavior of
the flag slightly, by avoiding to clear it unless we processed the SDIO
IRQ. The purpose with this at this point, is to keep the information about
whether there have been an SDIO IRQ signaled by the host, so at system
resume we can decide to process it without reading the SDIO_CCCR_INTx
register.

Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/core/sdio_irq.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index 9f54a259a1b36..e4823ef0a0de9 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -31,6 +31,7 @@ static int process_sdio_pending_irqs(struct mmc_host *host)
 {
 	struct mmc_card *card = host->card;
 	int i, ret, count;
+	bool sdio_irq_pending = host->sdio_irq_pending;
 	unsigned char pending;
 	struct sdio_func *func;
 
@@ -38,13 +39,16 @@ static int process_sdio_pending_irqs(struct mmc_host *host)
 	if (mmc_card_suspended(card))
 		return 0;
 
+	/* Clear the flag to indicate that we have processed the IRQ. */
+	host->sdio_irq_pending = false;
+
 	/*
 	 * Optimization, if there is only 1 function interrupt registered
 	 * and we know an IRQ was signaled then call irq handler directly.
 	 * Otherwise do the full probe.
 	 */
 	func = card->sdio_single_irq;
-	if (func && host->sdio_irq_pending) {
+	if (func && sdio_irq_pending) {
 		func->irq_handler(func);
 		return 1;
 	}
@@ -96,7 +100,6 @@ void sdio_run_irqs(struct mmc_host *host)
 {
 	mmc_claim_host(host);
 	if (host->sdio_irqs) {
-		host->sdio_irq_pending = true;
 		process_sdio_pending_irqs(host);
 		if (host->ops->ack_sdio_irq)
 			host->ops->ack_sdio_irq(host);
@@ -115,6 +118,7 @@ void sdio_irq_work(struct work_struct *work)
 
 void sdio_signal_irq(struct mmc_host *host)
 {
+	host->sdio_irq_pending = true;
 	queue_delayed_work(system_wq, &host->sdio_irq_work, 0);
 }
 EXPORT_SYMBOL_GPL(sdio_signal_irq);
@@ -160,7 +164,6 @@ static int sdio_irq_thread(void *_host)
 		if (ret)
 			break;
 		ret = process_sdio_pending_irqs(host);
-		host->sdio_irq_pending = false;
 		mmc_release_host(host);
 
 		/*
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 164/185] sched/psi: Correct overly pessimistic size calculation
@ 2019-09-22 18:49   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Miles Chen, linux-mediatek, wsd_upstream, Linus Torvalds,
	Peter Zijlstra, Thomas Gleixner, Ingo Molnar, Sasha Levin

From: Miles Chen <miles.chen@mediatek.com>

[ Upstream commit 4adcdcea717cb2d8436bef00dd689aa5bc76f11b ]

When passing a equal or more then 32 bytes long string to psi_write(),
psi_write() copies 31 bytes to its buf and overwrites buf[30]
with '\0'. Which makes the input string 1 byte shorter than
it should be.

Fix it by copying sizeof(buf) bytes when nbytes >= sizeof(buf).

This does not cause problems in normal use case like:
"some 500000 10000000" or "full 500000 10000000" because they
are less than 32 bytes in length.

	/* assuming nbytes == 35 */
	char buf[32];

	buf_size = min(nbytes, (sizeof(buf) - 1)); /* buf_size = 31 */
	if (copy_from_user(buf, user_buf, buf_size))
		return -EFAULT;

	buf[buf_size - 1] = '\0'; /* buf[30] = '\0' */

Before:

 %cd /proc/pressure/
 %echo "123456789|123456789|123456789|1234" > memory
 [   22.473497] nbytes=35,buf_size=31
 [   22.473775] 123456789|123456789|123456789| (print 30 chars)
 %sh: write error: Invalid argument

 %echo "123456789|123456789|123456789|1" > memory
 [   64.916162] nbytes=32,buf_size=31
 [   64.916331] 123456789|123456789|123456789| (print 30 chars)
 %sh: write error: Invalid argument

After:

 %cd /proc/pressure/
 %echo "123456789|123456789|123456789|1234" > memory
 [  254.837863] nbytes=35,buf_size=32
 [  254.838541] 123456789|123456789|123456789|1 (print 31 chars)
 %sh: write error: Invalid argument

 %echo "123456789|123456789|123456789|1" > memory
 [ 9965.714935] nbytes=32,buf_size=32
 [ 9965.715096] 123456789|123456789|123456789|1 (print 31 chars)
 %sh: write error: Invalid argument

Also remove the superfluous parentheses.

Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Cc: <linux-mediatek@lists.infradead.org>
Cc: <wsd_upstream@mediatek.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190912103452.13281-1-miles.chen@mediatek.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/psi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched/psi.c b/kernel/sched/psi.c
index 6e52b67b420e7..517e3719027e6 100644
--- a/kernel/sched/psi.c
+++ b/kernel/sched/psi.c
@@ -1198,7 +1198,7 @@ static ssize_t psi_write(struct file *file, const char __user *user_buf,
 	if (static_branch_likely(&psi_disabled))
 		return -EOPNOTSUPP;
 
-	buf_size = min(nbytes, (sizeof(buf) - 1));
+	buf_size = min(nbytes, sizeof(buf));
 	if (copy_from_user(buf, user_buf, buf_size))
 		return -EFAULT;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 164/185] sched/psi: Correct overly pessimistic size calculation
@ 2019-09-22 18:49   ` Sasha Levin
  0 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel-u79uwXL29TY76Z2rM5mHXA, stable-u79uwXL29TY76Z2rM5mHXA
  Cc: Sasha Levin, wsd_upstream-NuS5LvNUpcJWk0Htik3J/w, Peter Zijlstra,
	Miles Chen, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	Thomas Gleixner, Linus Torvalds, Ingo Molnar

From: Miles Chen <miles.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

[ Upstream commit 4adcdcea717cb2d8436bef00dd689aa5bc76f11b ]

When passing a equal or more then 32 bytes long string to psi_write(),
psi_write() copies 31 bytes to its buf and overwrites buf[30]
with '\0'. Which makes the input string 1 byte shorter than
it should be.

Fix it by copying sizeof(buf) bytes when nbytes >= sizeof(buf).

This does not cause problems in normal use case like:
"some 500000 10000000" or "full 500000 10000000" because they
are less than 32 bytes in length.

	/* assuming nbytes == 35 */
	char buf[32];

	buf_size = min(nbytes, (sizeof(buf) - 1)); /* buf_size = 31 */
	if (copy_from_user(buf, user_buf, buf_size))
		return -EFAULT;

	buf[buf_size - 1] = '\0'; /* buf[30] = '\0' */

Before:

 %cd /proc/pressure/
 %echo "123456789|123456789|123456789|1234" > memory
 [   22.473497] nbytes=35,buf_size=31
 [   22.473775] 123456789|123456789|123456789| (print 30 chars)
 %sh: write error: Invalid argument

 %echo "123456789|123456789|123456789|1" > memory
 [   64.916162] nbytes=32,buf_size=31
 [   64.916331] 123456789|123456789|123456789| (print 30 chars)
 %sh: write error: Invalid argument

After:

 %cd /proc/pressure/
 %echo "123456789|123456789|123456789|1234" > memory
 [  254.837863] nbytes=35,buf_size=32
 [  254.838541] 123456789|123456789|123456789|1 (print 31 chars)
 %sh: write error: Invalid argument

 %echo "123456789|123456789|123456789|1" > memory
 [ 9965.714935] nbytes=32,buf_size=32
 [ 9965.715096] 123456789|123456789|123456789|1 (print 31 chars)
 %sh: write error: Invalid argument

Also remove the superfluous parentheses.

Signed-off-by: Miles Chen <miles.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Cc: <linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: <wsd_upstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Cc: Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
Cc: Peter Zijlstra <peterz-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
Cc: Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
Link: https://lkml.kernel.org/r/20190912103452.13281-1-miles.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org
Signed-off-by: Ingo Molnar <mingo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 kernel/sched/psi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched/psi.c b/kernel/sched/psi.c
index 6e52b67b420e7..517e3719027e6 100644
--- a/kernel/sched/psi.c
+++ b/kernel/sched/psi.c
@@ -1198,7 +1198,7 @@ static ssize_t psi_write(struct file *file, const char __user *user_buf,
 	if (static_branch_likely(&psi_disabled))
 		return -EOPNOTSUPP;
 
-	buf_size = min(nbytes, (sizeof(buf) - 1));
+	buf_size = min(nbytes, sizeof(buf));
 	if (copy_from_user(buf, user_buf, buf_size))
 		return -EFAULT;
 
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 165/185] mmc: sdhci: Fix incorrect switch to HS mode
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (162 preceding siblings ...)
  2019-09-22 18:49   ` Sasha Levin
@ 2019-09-22 18:49 ` Sasha Levin
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 166/185] mmc: core: Add helper function to indicate if SDIO IRQs is enabled Sasha Levin
                   ` (19 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Al Cooper, Adrian Hunter, Ulf Hansson, Sasha Levin, linux-mmc

From: Al Cooper <alcooperx@gmail.com>

[ Upstream commit c894e33ddc1910e14d6f2a2016f60ab613fd8b37 ]

When switching from any MMC speed mode that requires 1.8v
(HS200, HS400 and HS400ES) to High Speed (HS) mode, the system
ends up configured for SDR12 with a 50MHz clock which is an illegal
mode.

This happens because the SDHCI_CTRL_VDD_180 bit in the
SDHCI_HOST_CONTROL2 register is left set and when this bit is
set, the speed mode is controlled by the SDHCI_CTRL_UHS field
in the SDHCI_HOST_CONTROL2 register. The SDHCI_CTRL_UHS field
will end up being set to 0 (SDR12) by sdhci_set_uhs_signaling()
because there is no UHS mode being set.

The fix is to change sdhci_set_uhs_signaling() to set the
SDHCI_CTRL_UHS field to SDR25 (which is the same as HS) for
any switch to HS mode.

This was found on a new eMMC controller that does strict checking
of the speed mode and the corresponding clock rate. It caused the
switch to HS400 mode to fail because part of the sequence to switch
to HS400 requires a switch from HS200 to HS before going to HS400.

Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a5dc5aae973e6..c66e66fbaeb40 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1849,7 +1849,9 @@ void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
 		ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
 	else if (timing == MMC_TIMING_UHS_SDR12)
 		ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
-	else if (timing == MMC_TIMING_UHS_SDR25)
+	else if (timing == MMC_TIMING_SD_HS ||
+		 timing == MMC_TIMING_MMC_HS ||
+		 timing == MMC_TIMING_UHS_SDR25)
 		ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
 	else if (timing == MMC_TIMING_UHS_SDR50)
 		ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 166/185] mmc: core: Add helper function to indicate if SDIO IRQs is enabled
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (163 preceding siblings ...)
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 165/185] mmc: sdhci: Fix incorrect switch to HS mode Sasha Levin
@ 2019-09-22 18:49 ` Sasha Levin
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 167/185] mmc: dw_mmc: Re-store SDIO IRQs mask at system resume Sasha Levin
                   ` (18 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ulf Hansson, Matthias Kaehlcke, Douglas Anderson, Sasha Levin, linux-mmc

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit bd880b00697befb73eff7220ee20bdae4fdd487b ]

To avoid each host driver supporting SDIO IRQs, from keeping track
internally about if SDIO IRQs has been claimed, let's introduce a common
helper function, sdio_irq_claimed().

The function returns true if SDIO IRQs are claimed, via using the
information about the number of claimed irqs. This is safe, even without
any locks, as long as the helper function is called only from
runtime/system suspend callbacks of the host driver.

Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/mmc/host.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 7ac3755444d3d..56a8ad506072c 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -493,6 +493,15 @@ void mmc_command_done(struct mmc_host *host, struct mmc_request *mrq);
 
 void mmc_cqe_request_done(struct mmc_host *host, struct mmc_request *mrq);
 
+/*
+ * May be called from host driver's system/runtime suspend/resume callbacks,
+ * to know if SDIO IRQs has been claimed.
+ */
+static inline bool sdio_irq_claimed(struct mmc_host *host)
+{
+	return host->sdio_irqs > 0;
+}
+
 static inline void mmc_signal_sdio_irq(struct mmc_host *host)
 {
 	host->ops->enable_sdio_irq(host, 0);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 167/185] mmc: dw_mmc: Re-store SDIO IRQs mask at system resume
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (164 preceding siblings ...)
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 166/185] mmc: core: Add helper function to indicate if SDIO IRQs is enabled Sasha Levin
@ 2019-09-22 18:49 ` Sasha Levin
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 168/185] raid5: don't increment read_errors on EILSEQ return Sasha Levin
                   ` (17 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ulf Hansson, Matthias Kaehlcke, Douglas Anderson, Sasha Levin, linux-mmc

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit 7c526608d5afb62cbc967225e2ccaacfdd142e9d ]

In cases when SDIO IRQs have been enabled, runtime suspend is prevented by
the driver. However, this still means dw_mci_runtime_suspend|resume() gets
called during system suspend/resume, via pm_runtime_force_suspend|resume().
This means during system suspend/resume, the register context of the dw_mmc
device most likely loses its register context, even in cases when SDIO IRQs
have been enabled.

To re-enable the SDIO IRQs during system resume, the dw_mmc driver
currently relies on the mmc core to re-enable the SDIO IRQs when it resumes
the SDIO card, but this isn't the recommended solution. Instead, it's
better to deal with this locally in the dw_mmc driver, so let's do that.

Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/dw_mmc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 60c3a06e3469a..45c3490546839 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -3482,6 +3482,10 @@ int dw_mci_runtime_resume(struct device *dev)
 	/* Force setup bus to guarantee available clock output */
 	dw_mci_setup_bus(host->slot, true);
 
+	/* Re-enable SDIO interrupts. */
+	if (sdio_irq_claimed(host->slot->mmc))
+		__dw_mci_enable_sdio_irq(host->slot, 1);
+
 	/* Now that slots are all setup, we can enable card detect */
 	dw_mci_enable_cd(host);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 168/185] raid5: don't increment read_errors on EILSEQ return
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (165 preceding siblings ...)
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 167/185] mmc: dw_mmc: Re-store SDIO IRQs mask at system resume Sasha Levin
@ 2019-09-22 18:49 ` Sasha Levin
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 169/185] mmc: mtk-sd: Re-store SDIO IRQs mask at system resume Sasha Levin
                   ` (16 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Nigel Croxon, Song Liu, Sasha Levin, linux-raid

From: Nigel Croxon <ncroxon@redhat.com>

[ Upstream commit b76b4715eba0d0ed574f58918b29c1b2f0fa37a8 ]

While MD continues to count read errors returned by the lower layer.
If those errors are -EILSEQ, instead of -EIO, it should NOT increase
the read_errors count.

When RAID6 is set up on dm-integrity target that detects massive
corruption, the leg will be ejected from the array.  Even if the
issue is correctable with a sector re-write and the array has
necessary redundancy to correct it.

The leg is ejected because it runs up the rdev->read_errors beyond
conf->max_nr_stripes.  The return status in dm-drypt when there is
a data integrity error is -EILSEQ (BLK_STS_PROTECTION).

Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid5.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 8d2811e436b93..f04e867b38211 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2526,7 +2526,8 @@ static void raid5_end_read_request(struct bio * bi)
 		int set_bad = 0;
 
 		clear_bit(R5_UPTODATE, &sh->dev[i].flags);
-		atomic_inc(&rdev->read_errors);
+		if (!(bi->bi_status == BLK_STS_PROTECTION))
+			atomic_inc(&rdev->read_errors);
 		if (test_bit(R5_ReadRepl, &sh->dev[i].flags))
 			pr_warn_ratelimited(
 				"md/raid:%s: read error on replacement device (sector %llu on %s).\n",
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 169/185] mmc: mtk-sd: Re-store SDIO IRQs mask at system resume
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (166 preceding siblings ...)
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 168/185] raid5: don't increment read_errors on EILSEQ return Sasha Levin
@ 2019-09-22 18:49 ` Sasha Levin
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 170/185] media: technisat-usb2: break out of loop at end of buffer Sasha Levin
                   ` (15 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Ulf Hansson, Sasha Levin, linux-mmc

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit 1c81d69d4c98aab56c5a7d5a810f84aefdb37e9b ]

In cases when SDIO IRQs have been enabled, runtime suspend is prevented by
the driver. However, this still means msdc_runtime_suspend|resume() gets
called during system suspend/resume, via pm_runtime_force_suspend|resume().

This means during system suspend/resume, the register context of the mtk-sd
device most likely loses its register context, even in cases when SDIO IRQs
have been enabled.

To re-enable the SDIO IRQs during system resume, the mtk-sd driver
currently relies on the mmc core to re-enable the SDIO IRQs when it resumes
the SDIO card, but this isn't the recommended solution. Instead, it's
better to deal with this locally in the mtk-sd driver, so let's do that.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/mtk-sd.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 33f4b6387ef71..978c8ccce7e31 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -2421,6 +2421,9 @@ static void msdc_restore_reg(struct msdc_host *host)
 	} else {
 		writel(host->save_para.pad_tune, host->base + tune_reg);
 	}
+
+	if (sdio_irq_claimed(host->mmc))
+		__msdc_enable_sdio_irq(host, 1);
 }
 
 static int msdc_runtime_suspend(struct device *dev)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 170/185] media: technisat-usb2: break out of loop at end of buffer
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (167 preceding siblings ...)
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 169/185] mmc: mtk-sd: Re-store SDIO IRQs mask at system resume Sasha Levin
@ 2019-09-22 18:49 ` Sasha Levin
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 171/185] libertas: Add missing sentinel at end of if_usb.c fw_table Sasha Levin
                   ` (14 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sean Young, syzbot+eaaaf38a95427be88f4b, Kees Cook,
	Mauro Carvalho Chehab, Sasha Levin, linux-media

From: Sean Young <sean@mess.org>

[ Upstream commit 0c4df39e504bf925ab666132ac3c98d6cbbe380b ]

Ensure we do not access the buffer beyond the end if no 0xff byte
is encountered.

Reported-by: syzbot+eaaaf38a95427be88f4b@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/technisat-usb2.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/technisat-usb2.c b/drivers/media/usb/dvb-usb/technisat-usb2.c
index c659e18b358b8..676d233d46d53 100644
--- a/drivers/media/usb/dvb-usb/technisat-usb2.c
+++ b/drivers/media/usb/dvb-usb/technisat-usb2.c
@@ -608,10 +608,9 @@ static int technisat_usb2_frontend_attach(struct dvb_usb_adapter *a)
 static int technisat_usb2_get_ir(struct dvb_usb_device *d)
 {
 	struct technisat_usb2_state *state = d->priv;
-	u8 *buf = state->buf;
-	u8 *b;
-	int ret;
 	struct ir_raw_event ev;
+	u8 *buf = state->buf;
+	int i, ret;
 
 	buf[0] = GET_IR_DATA_VENDOR_REQUEST;
 	buf[1] = 0x08;
@@ -647,26 +646,25 @@ static int technisat_usb2_get_ir(struct dvb_usb_device *d)
 		return 0; /* no key pressed */
 
 	/* decoding */
-	b = buf+1;
 
 #if 0
 	deb_rc("RC: %d ", ret);
-	debug_dump(b, ret, deb_rc);
+	debug_dump(buf + 1, ret, deb_rc);
 #endif
 
 	ev.pulse = 0;
-	while (1) {
-		ev.pulse = !ev.pulse;
-		ev.duration = (*b * FIRMWARE_CLOCK_DIVISOR * FIRMWARE_CLOCK_TICK) / 1000;
-		ir_raw_event_store(d->rc_dev, &ev);
-
-		b++;
-		if (*b == 0xff) {
+	for (i = 1; i < ARRAY_SIZE(state->buf); i++) {
+		if (buf[i] == 0xff) {
 			ev.pulse = 0;
 			ev.duration = 888888*2;
 			ir_raw_event_store(d->rc_dev, &ev);
 			break;
 		}
+
+		ev.pulse = !ev.pulse;
+		ev.duration = (buf[i] * FIRMWARE_CLOCK_DIVISOR *
+			       FIRMWARE_CLOCK_TICK) / 1000;
+		ir_raw_event_store(d->rc_dev, &ev);
 	}
 
 	ir_raw_event_handle(d->rc_dev);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 171/185] libertas: Add missing sentinel at end of if_usb.c fw_table
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (168 preceding siblings ...)
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 170/185] media: technisat-usb2: break out of loop at end of buffer Sasha Levin
@ 2019-09-22 18:49 ` Sasha Levin
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 172/185] e1000e: add workaround for possible stalled packet Sasha Levin
                   ` (13 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Kevin Easton, syzbot+98156c174c5a2cad9f8f, Kalle Valo,
	Sasha Levin, libertas-dev, linux-wireless, netdev

From: Kevin Easton <kevin@guarana.org>

[ Upstream commit 764f3f1ecffc434096e0a2b02f1a6cc964a89df6 ]

This sentinel tells the firmware loading process when to stop.

Reported-and-tested-by: syzbot+98156c174c5a2cad9f8f@syzkaller.appspotmail.com
Signed-off-by: Kevin Easton <kevin@guarana.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/libertas/if_usb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/libertas/if_usb.c b/drivers/net/wireless/marvell/libertas/if_usb.c
index f1622f0ff8c9e..fe3142d85d1e4 100644
--- a/drivers/net/wireless/marvell/libertas/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas/if_usb.c
@@ -50,7 +50,8 @@ static const struct lbs_fw_table fw_table[] = {
 	{ MODEL_8388, "libertas/usb8388_v5.bin", NULL },
 	{ MODEL_8388, "libertas/usb8388.bin", NULL },
 	{ MODEL_8388, "usb8388.bin", NULL },
-	{ MODEL_8682, "libertas/usb8682.bin", NULL }
+	{ MODEL_8682, "libertas/usb8682.bin", NULL },
+	{ 0, NULL, NULL }
 };
 
 static const struct usb_device_id if_usb_table[] = {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 172/185] e1000e: add workaround for possible stalled packet
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (169 preceding siblings ...)
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 171/185] libertas: Add missing sentinel at end of if_usb.c fw_table Sasha Levin
@ 2019-09-22 18:49 ` Sasha Levin
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 173/185] ALSA: hda - Add a quirk model for fixing Huawei Matebook X right speaker Sasha Levin
                   ` (12 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Kai-Heng Feng, Aaron Brown, Jeff Kirsher, Sasha Levin, netdev

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit e5e9a2ecfe780975820e157b922edee715710b66 ]

This works around a possible stalled packet issue, which may occur due to
clock recovery from the PCH being too slow, when the LAN is transitioning
from K1 at 1G link speed.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204057

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 10 ++++++++++
 drivers/net/ethernet/intel/e1000e/ich8lan.h |  2 +-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index cdae0efde8e64..7998a73b6a0fa 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1429,6 +1429,16 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 			else
 				phy_reg |= 0xFA;
 			e1e_wphy_locked(hw, I217_PLL_CLOCK_GATE_REG, phy_reg);
+
+			if (speed == SPEED_1000) {
+				hw->phy.ops.read_reg_locked(hw, HV_PM_CTRL,
+							    &phy_reg);
+
+				phy_reg |= HV_PM_CTRL_K1_CLK_REQ;
+
+				hw->phy.ops.write_reg_locked(hw, HV_PM_CTRL,
+							     phy_reg);
+			}
 		}
 		hw->phy.ops.release(hw);
 
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index eb09c755fa172..1502895eb45dd 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -210,7 +210,7 @@
 
 /* PHY Power Management Control */
 #define HV_PM_CTRL		PHY_REG(770, 17)
-#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA	0x100
+#define HV_PM_CTRL_K1_CLK_REQ		0x200
 #define HV_PM_CTRL_K1_ENABLE		0x4000
 
 #define I217_PLL_CLOCK_GATE_REG	PHY_REG(772, 28)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 173/185] ALSA: hda - Add a quirk model for fixing Huawei Matebook X right speaker
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (170 preceding siblings ...)
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 172/185] e1000e: add workaround for possible stalled packet Sasha Levin
@ 2019-09-22 18:49 ` Sasha Levin
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 174/185] ALSA: hda - Drop unsol event handler for Intel HDMI codecs Sasha Levin
                   ` (11 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Tomas Espeleta, Takashi Iwai, Sasha Levin, linux-doc

From: Tomas Espeleta <tomas.espeleta@gmail.com>

[ Upstream commit a2ef03fe617a8365fb7794531b11ba587509a9b9 ]

[ This is rather a revival of the patch Tomas sent in months ago, but
  applying only with the quirk model option -- tiwai ]

Hard coded coefficients to make Huawuei Matebook X right speaker
work. The Matebook X has a ALC298, please refer to bug 197801 on
how these numbers were reverse engineered from the Windows driver

The reversed engineered sequence represents a repeating pattern
of verbs, and the only values that are changing periodically are
written on indexes 0x23 and 0x25:

0x500, 0x23
0x400, VALUE1
0x500, 0x25
0x400, VALUE2

* skipped reading sequences (0x500 - 0xc00 sequences are ignored)
* static values from reverse engineering are used

NOTE: since a significant risk is still considered, this is provided
as an experimental fix that isn't applied as default for now.  For
enabling the fix, you'll have to choose huawei-mbx-stereo via model
option of snd-hda-intel module.

If we get feedback from users that this works stably, we may apply it
per default.

[ Some coding style fixes and replacement with AC_VERB_* by tiwai ]

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197801
Signed-off-by: Tomas Espeleta <tomas.espeleta@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/sound/hd-audio/models.rst |  3 +
 sound/pci/hda/patch_realtek.c           | 74 +++++++++++++++++++++++++
 2 files changed, 77 insertions(+)

diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd-audio/models.rst
index 7d7c191102a73..11298f0ce44db 100644
--- a/Documentation/sound/hd-audio/models.rst
+++ b/Documentation/sound/hd-audio/models.rst
@@ -260,6 +260,9 @@ alc295-hp-x360
     HP Spectre X360 fixups
 alc-sense-combo
     Headset button support for Chrome platform
+huawei-mbx-stereo
+    Enable initialization verbs for Huawei MBX stereo speakers;
+    might be risky, try this at your own risk
 
 ALC66x/67x/892
 ==============
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index c1ddfd2fac522..1bec62720374d 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3755,6 +3755,72 @@ static void alc269_x101_hp_automute_hook(struct hda_codec *codec,
 			    vref);
 }
 
+/*
+ * Magic sequence to make Huawei Matebook X right speaker working (bko#197801)
+ */
+struct hda_alc298_mbxinit {
+	unsigned char value_0x23;
+	unsigned char value_0x25;
+};
+
+static void alc298_huawei_mbx_stereo_seq(struct hda_codec *codec,
+					 const struct hda_alc298_mbxinit *initval,
+					 bool first)
+{
+	snd_hda_codec_write(codec, 0x06, 0, AC_VERB_SET_DIGI_CONVERT_3, 0x0);
+	alc_write_coef_idx(codec, 0x26, 0xb000);
+
+	if (first)
+		snd_hda_codec_write(codec, 0x21, 0, AC_VERB_GET_PIN_SENSE, 0x0);
+
+	snd_hda_codec_write(codec, 0x6, 0, AC_VERB_SET_DIGI_CONVERT_3, 0x80);
+	alc_write_coef_idx(codec, 0x26, 0xf000);
+	alc_write_coef_idx(codec, 0x23, initval->value_0x23);
+
+	if (initval->value_0x23 != 0x1e)
+		alc_write_coef_idx(codec, 0x25, initval->value_0x25);
+
+	snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 0x26);
+	snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_PROC_COEF, 0xb010);
+}
+
+static void alc298_fixup_huawei_mbx_stereo(struct hda_codec *codec,
+					   const struct hda_fixup *fix,
+					   int action)
+{
+	/* Initialization magic */
+	static const struct hda_alc298_mbxinit dac_init[] = {
+		{0x0c, 0x00}, {0x0d, 0x00}, {0x0e, 0x00}, {0x0f, 0x00},
+		{0x10, 0x00}, {0x1a, 0x40}, {0x1b, 0x82}, {0x1c, 0x00},
+		{0x1d, 0x00}, {0x1e, 0x00}, {0x1f, 0x00},
+		{0x20, 0xc2}, {0x21, 0xc8}, {0x22, 0x26}, {0x23, 0x24},
+		{0x27, 0xff}, {0x28, 0xff}, {0x29, 0xff}, {0x2a, 0x8f},
+		{0x2b, 0x02}, {0x2c, 0x48}, {0x2d, 0x34}, {0x2e, 0x00},
+		{0x2f, 0x00},
+		{0x30, 0x00}, {0x31, 0x00}, {0x32, 0x00}, {0x33, 0x00},
+		{0x34, 0x00}, {0x35, 0x01}, {0x36, 0x93}, {0x37, 0x0c},
+		{0x38, 0x00}, {0x39, 0x00}, {0x3a, 0xf8}, {0x38, 0x80},
+		{}
+	};
+	const struct hda_alc298_mbxinit *seq;
+
+	if (action != HDA_FIXUP_ACT_INIT)
+		return;
+
+	/* Start */
+	snd_hda_codec_write(codec, 0x06, 0, AC_VERB_SET_DIGI_CONVERT_3, 0x00);
+	snd_hda_codec_write(codec, 0x06, 0, AC_VERB_SET_DIGI_CONVERT_3, 0x80);
+	alc_write_coef_idx(codec, 0x26, 0xf000);
+	alc_write_coef_idx(codec, 0x22, 0x31);
+	alc_write_coef_idx(codec, 0x23, 0x0b);
+	alc_write_coef_idx(codec, 0x25, 0x00);
+	snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 0x26);
+	snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_PROC_COEF, 0xb010);
+
+	for (seq = dac_init; seq->value_0x23; seq++)
+		alc298_huawei_mbx_stereo_seq(codec, seq, seq == dac_init);
+}
+
 static void alc269_fixup_x101_headset_mic(struct hda_codec *codec,
 				     const struct hda_fixup *fix, int action)
 {
@@ -5780,6 +5846,7 @@ enum {
 	ALC255_FIXUP_DUMMY_LINEOUT_VERB,
 	ALC255_FIXUP_DELL_HEADSET_MIC,
 	ALC256_FIXUP_HUAWEI_MACH_WX9_PINS,
+	ALC298_FIXUP_HUAWEI_MBX_STEREO,
 	ALC295_FIXUP_HP_X360,
 	ALC221_FIXUP_HP_HEADSET_MIC,
 	ALC285_FIXUP_LENOVO_HEADPHONE_NOISE,
@@ -6089,6 +6156,12 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC255_FIXUP_MIC_MUTE_LED
 	},
+	[ALC298_FIXUP_HUAWEI_MBX_STEREO] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc298_fixup_huawei_mbx_stereo,
+		.chained = true,
+		.chain_id = ALC255_FIXUP_MIC_MUTE_LED
+	},
 	[ALC269_FIXUP_ASUS_X101_FUNC] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc269_fixup_x101_headset_mic,
@@ -7280,6 +7353,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
 	{.id = ALC225_FIXUP_HEADSET_JACK, .name = "alc-headset-jack"},
 	{.id = ALC295_FIXUP_CHROME_BOOK, .name = "alc-chrome-book"},
 	{.id = ALC299_FIXUP_PREDATOR_SPK, .name = "predator-spk"},
+	{.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"},
 	{}
 };
 #define ALC225_STANDARD_PINS \
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 174/185] ALSA: hda - Drop unsol event handler for Intel HDMI codecs
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   ` (171 preceding siblings ...)
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 173/185] ALSA: hda - Add a quirk model for fixing Huawei Matebook X right speaker Sasha Levin
@ 2019-09-22 18:49 ` Sasha Levin
  2019-09-22 18:49 ` [PATCH AUTOSEL 5.2 175/185] drm/amd/powerplay/smu7: enforce minimal VBITimeout (v2) Sasha Levin
                   ` (10 subsequent siblings)
  183 siblings, 0 replies; 209+ messages in thread
From: Sasha Levin @ 2019-09-22 18:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Takashi Iwai, Sasha Levin

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit f2dbe87c5ac1f88e6007ba1f1374f4bd8a197fb6 ]

We don't need to deal with the unsol events for Intel chips that are
tied with the graphics via audio component notifier.  Although the
presence of the audio component is checked at the beginning of
hdmi_unsol_event(), better to short cut by dropping unsol_event ops.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204565
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_hdmi.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index e49c1c00f5ce1..ca0404edd939e 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2611,6 +2611,8 @@ static void i915_pin_cvt_fixup(struct hda_codec *codec,
 /* precondition and allocation for Intel codecs */
 static int alloc_intel_hdmi(struct hda_codec *codec)
 {
+	int err;
+
 	/* requires i915 binding */
 	if (!codec->bus->core.audio_component) {
 		codec_info(codec, "No i915 binding for Intel HDMI/DP codec\n");
@@ -2619,7 +2621,12 @@ static int alloc_intel_hdmi(struct hda_codec *codec)
 		return -ENODEV;
 	}
 
-	return alloc_generic_hdmi(codec);
+	err = alloc_generic_hdmi(codec);
+	if (err < 0)
+		return err;
+	/* no need to handle unsol events */
+	codec->patch_ops.unsol_event = NULL;
+	return 0;
 }
 
 /* parse and post-process for Intel codecs */
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 209+ messages in thread

* [PATCH AUTOSEL 5.2 175/185] drm/amd/powerplay/smu7: enforce minimal VBITimeout (v2)
  2019-09-22 18:46 [PATCH AUTOSEL 5.2 001/185] ALSA: hda: Flush interrupts on disabling Sasha Levin
                   `