Re: Problem with application changing UID

[Jonathan Rajotte-Julien <jonathan.rajotte-julien@efficios.com>]

Hi Zach,

Thanks for reaching out.

lttng-ust does not support the change of uid once the application is
registered to the lttng-sessiond daemon. I think that we use the uid received on
registration for all subsequent operations.

Gabriel Pollo-Guilbert actually worked on this this summer. You can check out the
proposed wrapper for setuid here [1]. You will need to LD_PRELOAD it on the
start of you application. It basically unregister the application and
re-register it.

[1] https://lists.lttng.org/pipermail/lttng-dev/2019-June/029035.html
 This should be applied on master of lttng-ust.
 Make sure to use lttng-tools master also. Same for lttng-modules if necessary.

Would you be interested in giving it a try?

Cheers

On Tue, Sep 24, 2019 at 02:32:41PM +0000, Kramer, Zach wrote:
> Hi,
> 
> Is LTTng intended to support userspace applications that change their UID at run-time? As in, is there an expected behavior for when this happens?
> 
> For example:
> 
>   1.  Embedded device boots
>   2.  My daemon is launched as root via systemd
>   3.  Runs privileged code
>   4.  Changes UID to a less privileged user (500)
>   5.  Creates LTTng session
>      *   If session already exists, destroy it first
>   6.  <if ‘systemctl stop’ is called>: Destroy session
>      *   Otherwise it will be destroyed next daemon launch in step 5
> 
> This causes many conflicts with the trace folders that are created. Most of the time, LTTng creates a folder + metadata for both root and the user, then puts traces in the user folder. Other times, it may create a folder just for the user. This is seemingly random, since it’s a fresh device boot each time. If the daemon is launched directly (i.e. not from systemd), then the root folder gets the traces and the user folder gets the metadata. Here is a more detailed explanation:
> 
> 
> Case
> Command
> Result
> 
> Comments
> 1
> [Device boot]
> systemctl start daemon
> …../uid/500/32-bit --> has metadata and trace logs
> 
> Most times, this also happens:
> …../uid/0/32-bit --> has metadata but no trace logs
> 
> [cid:image001.png@01D56F9D.AF158770]
> Occasionally, the uid/0 folder is not created at all. This seems random, since this is tested by rebooting the device several times.
> 2
> [Device boot]
> systemctl start daemon
> systemctl stop daemon
> 
>   *   This uses LTTng C-API to destroy session
> …../uid/500/32-bit --> has metadata but the logs were cleared
> 
> Most times, this also happens:
> …../uid/0/32-bit --> has metadata but no trace logs
> 
> [cid:image001.png@01D56F9D.AF158770]
> The logs are cleared when ‘lttng destroy sess’ is called via the LTTng C-API. From my understanding, this should not happen.
> 
> Destroying the daemon from command line behaves properly. From my understanding, this should be practically the exact same command.
> 3
> root@device: daemon
> 
> (launching via command-line)
> When daemon is killed or session is stopped: mimics case 1
> 
> When daemon is alive:
> …./uid/0/32-bit --> has trace logs but empty metadata
> 
> …./uid/500/32-bit --> has metadata but empty trace logs
> [cid:image002.png@01D56F9D.AF158770]
> 
> 
> Is this use-case supported?
> 
> Unfortunately, the logs are huge and contain sensitive information. If they can help a substantial amount, I can prune them.
> 
> Thanks and best regards,
> Zach




> _______________________________________________
> lttng-dev mailing list
> lttng-dev@lists.lttng.org
> https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev


-- 
Jonathan Rajotte-Julien
EfficiOS
_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev