[dpdk-dev] [PATCH v2 1/3] eal: move CACHE and IOVA related definitions

[Konstantin Ananyev <konstantin.ananyev@intel.com>]

Right now RTE_CACHE_ and IOVA definitions are located inside rte_memory.h
That might cause an unwanted inclusions of arch/os specific header files.
See [1] for particular problem example.
Probably the simplest way to deal with such problems -
move these definitions into rte_commmon.h

Note that this move doesn't introduce any change in functionality.

[1] https://bugs.dpdk.org/show_bug.cgi?id=321

Suggested-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
 lib/librte_eal/common/include/rte_common.h | 44 ++++++++++++++++++++++
 lib/librte_eal/common/include/rte_memory.h | 38 -------------------
 2 files changed, 44 insertions(+), 38 deletions(-)

diff --git a/lib/librte_eal/common/include/rte_common.h b/lib/librte_eal/common/include/rte_common.h
index 05a3a6401..c275093d7 100644
--- a/lib/librte_eal/common/include/rte_common.h
+++ b/lib/librte_eal/common/include/rte_common.h
@@ -291,6 +291,50 @@ rte_is_aligned(void *ptr, unsigned align)
  */
 #define RTE_BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
 
+/*********** RTE_CACHE related macros ********/
+
+#define RTE_CACHE_LINE_MASK (RTE_CACHE_LINE_SIZE-1) /**< Cache line mask. */
+
+#define RTE_CACHE_LINE_ROUNDUP(size) \
+	(RTE_CACHE_LINE_SIZE * ((size + RTE_CACHE_LINE_SIZE - 1) / \
+	RTE_CACHE_LINE_SIZE))
+/**< Return the first cache-aligned value greater or equal to size. */
+
+/**< Cache line size in terms of log2 */
+#if RTE_CACHE_LINE_SIZE == 64
+#define RTE_CACHE_LINE_SIZE_LOG2 6
+#elif RTE_CACHE_LINE_SIZE == 128
+#define RTE_CACHE_LINE_SIZE_LOG2 7
+#else
+#error "Unsupported cache line size"
+#endif
+
+#define RTE_CACHE_LINE_MIN_SIZE 64	/**< Minimum Cache line size. */
+
+/**
+ * Force alignment to cache line.
+ */
+#define __rte_cache_aligned __rte_aligned(RTE_CACHE_LINE_SIZE)
+
+/**
+ * Force minimum cache line alignment.
+ */
+#define __rte_cache_min_aligned __rte_aligned(RTE_CACHE_LINE_MIN_SIZE)
+
+/*********** PA/IOVA type definitions ********/
+
+typedef uint64_t phys_addr_t; /**< Physical address. */
+#define RTE_BAD_PHYS_ADDR ((phys_addr_t)-1)
+/**
+ * IO virtual address type.
+ * When the physical addressing mode (IOVA as PA) is in use,
+ * the translation from an IO virtual address (IOVA) to a physical address
+ * is a direct mapping, i.e. the same value.
+ * Otherwise, in virtual mode (IOVA as VA), an IOMMU may do the translation.
+ */
+typedef uint64_t rte_iova_t;
+#define RTE_BAD_IOVA ((rte_iova_t)-1)
+
 /**
  * Combines 32b inputs most significant set bits into the least
  * significant bits to construct a value with the same MSBs as x
diff --git a/lib/librte_eal/common/include/rte_memory.h b/lib/librte_eal/common/include/rte_memory.h
index 4717dcb43..38e00e382 100644
--- a/lib/librte_eal/common/include/rte_memory.h
+++ b/lib/librte_eal/common/include/rte_memory.h
@@ -39,44 +39,6 @@ enum rte_page_sizes {
 };
 
 #define SOCKET_ID_ANY -1                    /**< Any NUMA socket. */
-#define RTE_CACHE_LINE_MASK (RTE_CACHE_LINE_SIZE-1) /**< Cache line mask. */
-
-#define RTE_CACHE_LINE_ROUNDUP(size) \
-	(RTE_CACHE_LINE_SIZE * ((size + RTE_CACHE_LINE_SIZE - 1) / RTE_CACHE_LINE_SIZE))
-/**< Return the first cache-aligned value greater or equal to size. */
-
-/**< Cache line size in terms of log2 */
-#if RTE_CACHE_LINE_SIZE == 64
-#define RTE_CACHE_LINE_SIZE_LOG2 6
-#elif RTE_CACHE_LINE_SIZE == 128
-#define RTE_CACHE_LINE_SIZE_LOG2 7
-#else
-#error "Unsupported cache line size"
-#endif
-
-#define RTE_CACHE_LINE_MIN_SIZE 64	/**< Minimum Cache line size. */
-
-/**
- * Force alignment to cache line.
- */
-#define __rte_cache_aligned __rte_aligned(RTE_CACHE_LINE_SIZE)
-
-/**
- * Force minimum cache line alignment.
- */
-#define __rte_cache_min_aligned __rte_aligned(RTE_CACHE_LINE_MIN_SIZE)
-
-typedef uint64_t phys_addr_t; /**< Physical address. */
-#define RTE_BAD_PHYS_ADDR ((phys_addr_t)-1)
-/**
- * IO virtual address type.
- * When the physical addressing mode (IOVA as PA) is in use,
- * the translation from an IO virtual address (IOVA) to a physical address
- * is a direct mapping, i.e. the same value.
- * Otherwise, in virtual mode (IOVA as VA), an IOMMU may do the translation.
- */
-typedef uint64_t rte_iova_t;
-#define RTE_BAD_IOVA ((rte_iova_t)-1)
 
 /**
  * Physical memory segment descriptor.
-- 
2.17.1