From: Rob Herring <robh@kernel.org>
To: Taniya Das <tdas@codeaurora.org>
Cc: "Stephen Boyd" <sboyd@kernel.org>,
"Michael Turquette " <mturquette@baylibre.com>,
"David Brown" <david.brown@linaro.org>,
"Rajendra Nayak" <rnayak@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v3 2/3] dt-bindings: clk: qcom: Add YAML schemas for the GCC clock bindings
Date: Fri, 27 Sep 2019 12:27:43 -0500 [thread overview]
Message-ID: <20190927172743.GA12132@bogus> (raw)
In-Reply-To: <20190918095018.17979-3-tdas@codeaurora.org>
On Wed, Sep 18, 2019 at 03:20:17PM +0530, Taniya Das wrote:
> The GCC clock provider have a bunch of generic properties that
> are needed in a device tree. Add a YAML schemas for those. Also update
> the compatible for SC7180 along with example for clocks & clock-names.
I'm fine fixing errors in the conversion, but adding a new chip should
be separate patch.
>
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
> .../devicetree/bindings/clock/qcom,gcc.txt | 94 -----------
> .../devicetree/bindings/clock/qcom,gcc.yaml | 157 ++++++++++++++++++
> include/dt-bindings/clock/qcom,gcc-sc7180.h | 155 +++++++++++++++++
> 3 files changed, 312 insertions(+), 94 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc.txt
> create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> create mode 100644 include/dt-bindings/clock/qcom,gcc-sc7180.h
>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
> deleted file mode 100644
> index d14362ad4132..000000000000
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
> +++ /dev/null
> @@ -1,94 +0,0 @@
> -Qualcomm Global Clock & Reset Controller Binding
> -------------------------------------------------
> -
> -Required properties :
> -- compatible : shall contain only one of the following:
> -
> - "qcom,gcc-apq8064"
> - "qcom,gcc-apq8084"
> - "qcom,gcc-ipq8064"
> - "qcom,gcc-ipq4019"
> - "qcom,gcc-ipq8074"
> - "qcom,gcc-msm8660"
> - "qcom,gcc-msm8916"
> - "qcom,gcc-msm8960"
> - "qcom,gcc-msm8974"
> - "qcom,gcc-msm8974pro"
> - "qcom,gcc-msm8974pro-ac"
> - "qcom,gcc-msm8994"
> - "qcom,gcc-msm8996"
> - "qcom,gcc-msm8998"
> - "qcom,gcc-mdm9615"
> - "qcom,gcc-qcs404"
> - "qcom,gcc-sdm630"
> - "qcom,gcc-sdm660"
> - "qcom,gcc-sdm845"
> - "qcom,gcc-sm8150"
> -
> -- reg : shall contain base register location and length
> -- #clock-cells : shall contain 1
> -- #reset-cells : shall contain 1
> -
> -Optional properties :
> -- #power-domain-cells : shall contain 1
> -- Qualcomm TSENS (thermal sensor device) on some devices can
> -be part of GCC and hence the TSENS properties can also be
> -part of the GCC/clock-controller node.
> -For more details on the TSENS properties please refer
> -Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> -- protected-clocks : Protected clock specifier list as per common clock
> - binding.
> -
> -For SM8150 only:
> - - clocks: a list of phandles and clock-specifier pairs,
> - one for each entry in clock-names.
> - - clock-names: "bi_tcxo" (required)
> - "sleep_clk" (optional)
> - "aud_ref_clock" (optional)
> -
> -Example:
> - clock-controller@900000 {
> - compatible = "qcom,gcc-msm8960";
> - reg = <0x900000 0x4000>;
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - #power-domain-cells = <1>;
> - };
> -
> -Example of GCC with TSENS properties:
> - clock-controller@900000 {
> - compatible = "qcom,gcc-apq8064";
> - reg = <0x00900000 0x4000>;
> - nvmem-cells = <&tsens_calib>, <&tsens_backup>;
> - nvmem-cell-names = "calib", "calib_backup";
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - #thermal-sensor-cells = <1>;
> - };
> -
> -Example of GCC with protected-clocks properties:
> - clock-controller@100000 {
> - compatible = "qcom,gcc-sdm845";
> - reg = <0x100000 0x1f0000>;
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - #power-domain-cells = <1>;
> - protected-clocks = <GCC_QSPI_CORE_CLK>,
> - <GCC_QSPI_CORE_CLK_SRC>,
> - <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
> - <GCC_LPASS_Q6_AXI_CLK>,
> - <GCC_LPASS_SWAY_CLK>;
> - };
> -
> -Example of GCC with clocks
> - gcc: clock-controller@100000 {
> - compatible = "qcom,gcc-sm8150";
> - reg = <0x00100000 0x1f0000>;
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - #power-domain-cells = <1>;
> - clock-names = "bi_tcxo",
> - "sleep_clk";
> - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
> - <&sleep_clk>;
> - };
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> new file mode 100644
> index 000000000000..056a7977c458
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> @@ -0,0 +1,157 @@
> +# SPDX-License-Identifier: GPL-2.0
As all the authors where QCom on the old file, can you relicense to
(GPL-2.0-only OR BSD-2-Clause)?
And please, can all of Qcom and the Linaro QCom landing team get aligned
on this.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/qcom,gcc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Global Clock & Reset Controller Binding
> +
> +maintainers:
> + - Stephen Boyd <sboyd@kernel.org>
> +
> +properties:
> + "#clock-cells":
> + const: 1
> +
> + "#reset-cells":
> + const: 1
> +
> + reg:
> + maxItems: 1
> +
> + compatible :
> + enum:
> + - qcom,gcc-apq8064
> + - qcom,gcc-apq8084
> + - qcom,gcc-ipq8064
> + - qcom,gcc-ipq4019
> + - qcom,gcc-ipq8074
> + - qcom,gcc-msm8660
> + - qcom,gcc-msm8916
> + - qcom,gcc-msm8960
> + - qcom,gcc-msm8974
> + - qcom,gcc-msm8974pro
> + - qcom,gcc-msm8974pro-ac
> + - qcom,gcc-msm8994
> + - qcom,gcc-msm8996
> + - qcom,gcc-msm8998
> + - qcom,gcc-mdm9615
> + - qcom,gcc-qcs404
> + - qcom,gcc-sdm630
> + - qcom,gcc-sdm660
> + - qcom,gcc-sdm845
> + - qcom,gcc-sm8150
> + - qcom,gcc-sc7180
> +
> + clocks:
> + minItems: 1
> + maxItems: 3
> + items:
> + - description: Board XO source
> + - description: Board active XO source
> + - description: Sleep clock source(optional)
> +
> + clock-names:
> + minItems: 1
> + maxItems: 3
> + items:
> + - const: bi_tcxo
> + - const: bi_tcxo_ao
> + - const: sleep_clk
> +
> + nvmem-cells:
> + minItems: 1
> + maxItems: 2
> + description:
> + Qualcomm TSENS (thermal sensor device) on some devices can
> + be part of GCC and hence the TSENS properties can also be part
> + of the GCC/clock-controller node.
> + For more details on the TSENS properties please refer
> + Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +
> + nvmem-cell-names:
> + minItems: 1
> + maxItems: 2
> + description:
> + Names for each nvmem-cells specified.
> + items:
> + - const: calib
> + - const: calib_backup
> +
> + "#thermal-sensor-cells":
> + const: 1
>
> + "#power-domain-cells":
> + const: 1
> +
> + protected-clocks:
> + description:
> + Protected clock specifier list as per common clock binding
> +
> +required:
> + - "#clock-cells"
> + - "#reset-cells"
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> +
> +examples:
> + - |
> + // Example:
> + clock-controller@900000 {
> + compatible = "qcom,gcc-msm8960";
> + reg = <0x900000 0x4000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
Does this pass 'make dt_binding_check' as 'clocks' is required.
> + };
> +
> +
> + - |
> + // Example of GCC with TSENS properties:
> + clock-controller@900000 {
> + compatible = "qcom,gcc-apq8064";
> + reg = <0x00900000 0x4000>;
> + nvmem-cells = <&tsens_calib>, <&tsens_backup>;
> + nvmem-cell-names = "calib", "calib_backup";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> + - |
> + //Example of GCC with protected-clocks properties:
> + clock-controller@100000 {
> + compatible = "qcom,gcc-sdm845";
> + reg = <0x100000 0x1f0000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + protected-clocks = <187>, <188>, <189>, <190>, <191>;
> + };
> +
> + - |
> + //Example of GCC with clock node properties for SM8150:
> + clock-controller@100000 {
> + compatible = "qcom,gcc-sm8150";
> + reg = <0x00100000 0x1f0000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + clocks = <&rpmhcc 0>, <&rpmhcc 1>, <&sleep_clk>;
> + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
> + };
> +
> + - |
> + //Example of GCC with clock nodes properties:
> + clock-controller@100000 {
> + compatible = "qcom,gcc-sc7180";
> + reg = <0x100000 0x1f0000>;
> + clocks = <&rpmhcc 0>, <&rpmhcc 1>;
> + clock-names = "bi_tcxo", "bi_tcxo_ao";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +...
> diff --git a/include/dt-bindings/clock/qcom,gcc-sc7180.h b/include/dt-bindings/clock/qcom,gcc-sc7180.h
> new file mode 100644
> index 000000000000..d76b061f6a4e
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,gcc-sc7180.h
> @@ -0,0 +1,155 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SC7180_H
> +#define _DT_BINDINGS_CLK_QCOM_GCC_SC7180_H
> +
> +/* GCC clocks */
> +#define GCC_GPLL0_MAIN_DIV_CDIV 0
> +#define GPLL0 1
> +#define GPLL0_OUT_EVEN 2
> +#define GPLL1 3
> +#define GPLL4 4
> +#define GPLL6 5
> +#define GPLL7 6
> +#define GCC_AGGRE_UFS_PHY_AXI_CLK 7
> +#define GCC_AGGRE_USB3_PRIM_AXI_CLK 8
> +#define GCC_BOOT_ROM_AHB_CLK 9
> +#define GCC_CAMERA_AHB_CLK 10
> +#define GCC_CAMERA_HF_AXI_CLK 11
> +#define GCC_CAMERA_THROTTLE_HF_AXI_CLK 12
> +#define GCC_CAMERA_XO_CLK 13
> +#define GCC_CE1_AHB_CLK 14
> +#define GCC_CE1_AXI_CLK 15
> +#define GCC_CE1_CLK 16
> +#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 17
> +#define GCC_CPUSS_AHB_CLK 18
> +#define GCC_CPUSS_AHB_CLK_SRC 19
> +#define GCC_CPUSS_GNOC_CLK 20
> +#define GCC_CPUSS_RBCPR_CLK 21
> +#define GCC_DDRSS_GPU_AXI_CLK 22
> +#define GCC_DISP_AHB_CLK 23
> +#define GCC_DISP_GPLL0_CLK_SRC 24
> +#define GCC_DISP_GPLL0_DIV_CLK_SRC 25
> +#define GCC_DISP_HF_AXI_CLK 26
> +#define GCC_DISP_THROTTLE_HF_AXI_CLK 27
> +#define GCC_DISP_XO_CLK 28
> +#define GCC_GP1_CLK 29
> +#define GCC_GP1_CLK_SRC 30
> +#define GCC_GP2_CLK 31
> +#define GCC_GP2_CLK_SRC 32
> +#define GCC_GP3_CLK 33
> +#define GCC_GP3_CLK_SRC 34
> +#define GCC_GPU_CFG_AHB_CLK 35
> +#define GCC_GPU_GPLL0_CLK_SRC 36
> +#define GCC_GPU_GPLL0_DIV_CLK_SRC 37
> +#define GCC_GPU_MEMNOC_GFX_CLK 38
> +#define GCC_GPU_SNOC_DVM_GFX_CLK 39
> +#define GCC_NPU_AXI_CLK 40
> +#define GCC_NPU_BWMON_AXI_CLK 41
> +#define GCC_NPU_BWMON_DMA_CFG_AHB_CLK 42
> +#define GCC_NPU_BWMON_DSP_CFG_AHB_CLK 43
> +#define GCC_NPU_CFG_AHB_CLK 44
> +#define GCC_NPU_DMA_CLK 45
> +#define GCC_NPU_GPLL0_CLK_SRC 46
> +#define GCC_NPU_GPLL0_DIV_CLK_SRC 47
> +#define GCC_PDM2_CLK 48
> +#define GCC_PDM2_CLK_SRC 49
> +#define GCC_PDM_AHB_CLK 50
> +#define GCC_PDM_XO4_CLK 51
> +#define GCC_PRNG_AHB_CLK 52
> +#define GCC_QSPI_CNOC_PERIPH_AHB_CLK 53
> +#define GCC_QSPI_CORE_CLK 54
> +#define GCC_QSPI_CORE_CLK_SRC 55
> +#define GCC_QUPV3_WRAP0_CORE_2X_CLK 56
> +#define GCC_QUPV3_WRAP0_CORE_CLK 57
> +#define GCC_QUPV3_WRAP0_S0_CLK 58
> +#define GCC_QUPV3_WRAP0_S0_CLK_SRC 59
> +#define GCC_QUPV3_WRAP0_S1_CLK 60
> +#define GCC_QUPV3_WRAP0_S1_CLK_SRC 61
> +#define GCC_QUPV3_WRAP0_S2_CLK 62
> +#define GCC_QUPV3_WRAP0_S2_CLK_SRC 63
> +#define GCC_QUPV3_WRAP0_S3_CLK 64
> +#define GCC_QUPV3_WRAP0_S3_CLK_SRC 65
> +#define GCC_QUPV3_WRAP0_S4_CLK 66
> +#define GCC_QUPV3_WRAP0_S4_CLK_SRC 67
> +#define GCC_QUPV3_WRAP0_S5_CLK 68
> +#define GCC_QUPV3_WRAP0_S5_CLK_SRC 69
> +#define GCC_QUPV3_WRAP1_CORE_2X_CLK 70
> +#define GCC_QUPV3_WRAP1_CORE_CLK 71
> +#define GCC_QUPV3_WRAP1_S0_CLK 72
> +#define GCC_QUPV3_WRAP1_S0_CLK_SRC 73
> +#define GCC_QUPV3_WRAP1_S1_CLK 74
> +#define GCC_QUPV3_WRAP1_S1_CLK_SRC 75
> +#define GCC_QUPV3_WRAP1_S2_CLK 76
> +#define GCC_QUPV3_WRAP1_S2_CLK_SRC 77
> +#define GCC_QUPV3_WRAP1_S3_CLK 78
> +#define GCC_QUPV3_WRAP1_S3_CLK_SRC 79
> +#define GCC_QUPV3_WRAP1_S4_CLK 80
> +#define GCC_QUPV3_WRAP1_S4_CLK_SRC 81
> +#define GCC_QUPV3_WRAP1_S5_CLK 82
> +#define GCC_QUPV3_WRAP1_S5_CLK_SRC 83
> +#define GCC_QUPV3_WRAP_0_M_AHB_CLK 84
> +#define GCC_QUPV3_WRAP_0_S_AHB_CLK 85
> +#define GCC_QUPV3_WRAP_1_M_AHB_CLK 86
> +#define GCC_QUPV3_WRAP_1_S_AHB_CLK 87
> +#define GCC_SDCC1_AHB_CLK 88
> +#define GCC_SDCC1_APPS_CLK 89
> +#define GCC_SDCC1_APPS_CLK_SRC 90
> +#define GCC_SDCC1_ICE_CORE_CLK 91
> +#define GCC_SDCC1_ICE_CORE_CLK_SRC 92
> +#define GCC_SDCC2_AHB_CLK 93
> +#define GCC_SDCC2_APPS_CLK 94
> +#define GCC_SDCC2_APPS_CLK_SRC 95
> +#define GCC_SYS_NOC_CPUSS_AHB_CLK 96
> +#define GCC_UFS_MEM_CLKREF_CLK 97
> +#define GCC_UFS_PHY_AHB_CLK 98
> +#define GCC_UFS_PHY_AXI_CLK 99
> +#define GCC_UFS_PHY_AXI_CLK_SRC 100
> +#define GCC_UFS_PHY_ICE_CORE_CLK 101
> +#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 102
> +#define GCC_UFS_PHY_PHY_AUX_CLK 103
> +#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 104
> +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 105
> +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 106
> +#define GCC_UFS_PHY_UNIPRO_CORE_CLK 107
> +#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 108
> +#define GCC_USB30_PRIM_MASTER_CLK 109
> +#define GCC_USB30_PRIM_MASTER_CLK_SRC 110
> +#define GCC_USB30_PRIM_MOCK_UTMI_CLK 111
> +#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 112
> +#define GCC_USB30_PRIM_SLEEP_CLK 113
> +#define GCC_USB3_PRIM_CLKREF_CLK 114
> +#define GCC_USB3_PRIM_PHY_AUX_CLK 115
> +#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 116
> +#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 117
> +#define GCC_USB3_PRIM_PHY_PIPE_CLK 118
> +#define GCC_USB_PHY_CFG_AHB2PHY_CLK 119
> +#define GCC_VIDEO_AHB_CLK 120
> +#define GCC_VIDEO_AXI_CLK 121
> +#define GCC_VIDEO_GPLL0_DIV_CLK_SRC 122
> +#define GCC_VIDEO_THROTTLE_AXI_CLK 123
> +#define GCC_VIDEO_XO_CLK 124
> +
> +/* GCC resets */
> +#define GCC_QUSB2PHY_PRIM_BCR 0
> +#define GCC_QUSB2PHY_SEC_BCR 1
> +#define GCC_UFS_PHY_BCR 2
> +#define GCC_USB30_PRIM_BCR 3
> +#define GCC_USB3_DP_PHY_PRIM_BCR 4
> +#define GCC_USB3_DP_PHY_SEC_BCR 5
> +#define GCC_USB3_PHY_PRIM_BCR 6
> +#define GCC_USB3_PHY_SEC_BCR 7
> +#define GCC_USB3PHY_PHY_PRIM_BCR 8
> +#define GCC_USB3PHY_PHY_SEC_BCR 9
> +#define GCC_USB_PHY_CFG_AHB2PHY_BCR 10
> +
> +/* GCC GDSCRs */
> +#define UFS_PHY_GDSC 0
> +#define USB30_PRIM_GDSC 1
> +#define HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC 2
> +#define HLOS1_VOTE_MMNOC_MMU_TBU_SF_GDSC 3
> +
> +#endif
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> of the Code Aurora Forum, hosted by the Linux Foundation.
>
next prev parent reply other threads:[~2019-09-27 17:27 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-18 9:50 [PATCH v3 0/3] Add Global Clock controller (GCC) driver for SC7180 Taniya Das
2019-09-18 9:50 ` [PATCH v3 1/3] clk: qcom: rcg: update the DFS macro for RCG Taniya Das
2019-09-18 9:50 ` [PATCH v3 2/3] dt-bindings: clk: qcom: Add YAML schemas for the GCC clock bindings Taniya Das
2019-09-18 17:52 ` Matthias Kaehlcke
2019-09-23 6:33 ` Taniya Das
2019-09-27 17:27 ` Rob Herring [this message]
2019-10-14 10:16 ` Taniya Das
[not found] ` <20190918212614.448FC20882@mail.kernel.org>
2019-10-14 10:17 ` Taniya Das
2019-09-18 9:50 ` [PATCH v3 3/3] clk: qcom: Add Global Clock controller (GCC) driver for SC7180 Taniya Das
2019-09-19 11:08 ` Rajendra Nayak
2019-09-20 4:00 ` Taniya Das
2019-09-20 4:44 ` Rajendra Nayak
[not found] ` <20190918213946.DC03521924@mail.kernel.org>
2019-09-23 8:01 ` Taniya Das
2019-09-24 23:12 ` Stephen Boyd
2019-09-25 11:20 ` Taniya Das
2019-09-25 13:03 ` Stephen Boyd
2019-09-27 7:37 ` Taniya Das
2019-10-01 14:38 ` Stephen Boyd
2019-10-03 10:31 ` Taniya Das
2019-10-03 16:01 ` Stephen Boyd
2019-10-04 17:39 ` Taniya Das
2019-10-04 23:20 ` Stephen Boyd
2019-10-09 9:19 ` Taniya Das
2019-10-10 4:16 ` Stephen Boyd
2019-10-11 10:28 ` Taniya Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190927172743.GA12132@bogus \
--to=robh@kernel.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=rnayak@codeaurora.org \
--cc=sboyd@kernel.org \
--cc=tdas@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.