All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>,
	Wolfram Sang <wsa@the-dreams.de>, Sasha Levin <sashal@kernel.org>,
	linux-i2c@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 03/23] i2c-cht-wc: Fix lockdep warning
Date: Sun, 29 Sep 2019 13:35:13 -0400	[thread overview]
Message-ID: <20190929173535.9744-3-sashal@kernel.org> (raw)
In-Reply-To: <20190929173535.9744-1-sashal@kernel.org>

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 232219b9a464c2479c98aa589acb1bd3383ae9d6 ]

When the kernel is build with lockdep support and the i2c-cht-wc driver is
used, the following warning is shown:

[   66.674334] ======================================================
[   66.674337] WARNING: possible circular locking dependency detected
[   66.674340] 5.3.0-rc4+ #83 Not tainted
[   66.674342] ------------------------------------------------------
[   66.674345] systemd-udevd/1232 is trying to acquire lock:
[   66.674349] 00000000a74dab07 (intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock){+.+.}, at: regmap_write+0x31/0x70
[   66.674360]
               but task is already holding lock:
[   66.674362] 00000000d44a85b7 (i2c_register_adapter){+.+.}, at: i2c_smbus_xfer+0x49/0xf0
[   66.674370]
               which lock already depends on the new lock.

[   66.674371]
               the existing dependency chain (in reverse order) is:
[   66.674374]
               -> #1 (i2c_register_adapter){+.+.}:
[   66.674381]        rt_mutex_lock_nested+0x46/0x60
[   66.674384]        i2c_smbus_xfer+0x49/0xf0
[   66.674387]        i2c_smbus_read_byte_data+0x45/0x70
[   66.674391]        cht_wc_byte_reg_read+0x35/0x50
[   66.674394]        _regmap_read+0x63/0x1a0
[   66.674396]        _regmap_update_bits+0xa8/0xe0
[   66.674399]        regmap_update_bits_base+0x63/0xa0
[   66.674403]        regmap_irq_update_bits.isra.0+0x3b/0x50
[   66.674406]        regmap_add_irq_chip+0x592/0x7a0
[   66.674409]        devm_regmap_add_irq_chip+0x89/0xed
[   66.674412]        cht_wc_probe+0x102/0x158
[   66.674415]        i2c_device_probe+0x95/0x250
[   66.674419]        really_probe+0xf3/0x380
[   66.674422]        driver_probe_device+0x59/0xd0
[   66.674425]        device_driver_attach+0x53/0x60
[   66.674428]        __driver_attach+0x92/0x150
[   66.674431]        bus_for_each_dev+0x7d/0xc0
[   66.674434]        bus_add_driver+0x14d/0x1f0
[   66.674437]        driver_register+0x6d/0xb0
[   66.674440]        i2c_register_driver+0x45/0x80
[   66.674445]        do_one_initcall+0x60/0x2f4
[   66.674450]        kernel_init_freeable+0x20d/0x2b4
[   66.674453]        kernel_init+0xa/0x10c
[   66.674457]        ret_from_fork+0x3a/0x50
[   66.674459]
               -> #0 (intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock){+.+.}:
[   66.674465]        __lock_acquire+0xe07/0x1930
[   66.674468]        lock_acquire+0x9d/0x1a0
[   66.674472]        __mutex_lock+0xa8/0x9a0
[   66.674474]        regmap_write+0x31/0x70
[   66.674480]        cht_wc_i2c_adap_smbus_xfer+0x72/0x240 [i2c_cht_wc]
[   66.674483]        __i2c_smbus_xfer+0x1a3/0x640
[   66.674486]        i2c_smbus_xfer+0x67/0xf0
[   66.674489]        i2c_smbus_read_byte_data+0x45/0x70
[   66.674494]        bq24190_probe+0x26b/0x410 [bq24190_charger]
[   66.674497]        i2c_device_probe+0x189/0x250
[   66.674500]        really_probe+0xf3/0x380
[   66.674503]        driver_probe_device+0x59/0xd0
[   66.674506]        device_driver_attach+0x53/0x60
[   66.674509]        __driver_attach+0x92/0x150
[   66.674512]        bus_for_each_dev+0x7d/0xc0
[   66.674515]        bus_add_driver+0x14d/0x1f0
[   66.674518]        driver_register+0x6d/0xb0
[   66.674521]        i2c_register_driver+0x45/0x80
[   66.674524]        do_one_initcall+0x60/0x2f4
[   66.674528]        do_init_module+0x5c/0x230
[   66.674531]        load_module+0x2707/0x2a20
[   66.674534]        __do_sys_init_module+0x188/0x1b0
[   66.674537]        do_syscall_64+0x5c/0xb0
[   66.674541]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   66.674543]
               other info that might help us debug this:

[   66.674545]  Possible unsafe locking scenario:

[   66.674547]        CPU0                    CPU1
[   66.674548]        ----                    ----
[   66.674550]   lock(i2c_register_adapter);
[   66.674553]                                lock(intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock);
[   66.674556]                                lock(i2c_register_adapter);
[   66.674559]   lock(intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock);
[   66.674561]
                *** DEADLOCK ***

The problem is that the CHT Whiskey Cove PMIC's builtin i2c-adapter is
itself a part of an i2c-client (the PMIC). This means that transfers done
through it take adapter->bus_lock twice, once for the parent i2c-adapter
and once for its own bus_lock. Lockdep does not like this nested locking.

To make lockdep happy in the case of busses with muxes, the i2c-core's
i2c_adapter_lock_bus function calls:

 rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));

But i2c_adapter_depth only works when the direct parent of the adapter is
another adapter, as it is only meant for muxes. In this case there is an
i2c-client and MFD instantiated platform_device in the parent->child chain
between the 2 devices.

This commit overrides the default i2c_lock_operations, passing a hardcoded
depth of 1 to rt_mutex_lock_nested, making lockdep happy.

Note that if there were to be a mux attached to the i2c-wc-cht adapter,
this would break things again since the i2c-mux code expects the
root-adapter to have a locking depth of 0. But the i2c-wc-cht adapter
always has only 1 client directly attached in the form of the charger IC
paired with the CHT Whiskey Cove PMIC.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-cht-wc.c | 46 +++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
index 190bbbc7bfeeb..29456c8821e7c 100644
--- a/drivers/i2c/busses/i2c-cht-wc.c
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -185,6 +185,51 @@ static const struct i2c_algorithm cht_wc_i2c_adap_algo = {
 	.smbus_xfer = cht_wc_i2c_adap_smbus_xfer,
 };
 
+/*
+ * We are an i2c-adapter which itself is part of an i2c-client. This means that
+ * transfers done through us take adapter->bus_lock twice, once for our parent
+ * i2c-adapter and once to take our own bus_lock. Lockdep does not like this
+ * nested locking, to make lockdep happy in the case of busses with muxes, the
+ * i2c-core's i2c_adapter_lock_bus function calls:
+ * rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
+ *
+ * But i2c_adapter_depth only works when the direct parent of the adapter is
+ * another adapter, as it is only meant for muxes. In our case there is an
+ * i2c-client and MFD instantiated platform_device in the parent->child chain
+ * between the 2 devices.
+ *
+ * So we override the default i2c_lock_operations and pass a hardcoded
+ * depth of 1 to rt_mutex_lock_nested, to make lockdep happy.
+ *
+ * Note that if there were to be a mux attached to our adapter, this would
+ * break things again since the i2c-mux code expects the root-adapter to have
+ * a locking depth of 0. But we always have only 1 client directly attached
+ * in the form of the Charger IC paired with the CHT Whiskey Cove PMIC.
+ */
+static void cht_wc_i2c_adap_lock_bus(struct i2c_adapter *adapter,
+				 unsigned int flags)
+{
+	rt_mutex_lock_nested(&adapter->bus_lock, 1);
+}
+
+static int cht_wc_i2c_adap_trylock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	return rt_mutex_trylock(&adapter->bus_lock);
+}
+
+static void cht_wc_i2c_adap_unlock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	rt_mutex_unlock(&adapter->bus_lock);
+}
+
+static const struct i2c_lock_operations cht_wc_i2c_adap_lock_ops = {
+	.lock_bus =    cht_wc_i2c_adap_lock_bus,
+	.trylock_bus = cht_wc_i2c_adap_trylock_bus,
+	.unlock_bus =  cht_wc_i2c_adap_unlock_bus,
+};
+
 /**** irqchip for the client connected to the extchgr i2c adapter ****/
 static void cht_wc_i2c_irq_lock(struct irq_data *data)
 {
@@ -268,6 +313,7 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
 	adap->adapter.owner = THIS_MODULE;
 	adap->adapter.class = I2C_CLASS_HWMON;
 	adap->adapter.algo = &cht_wc_i2c_adap_algo;
+	adap->adapter.lock_ops = &cht_wc_i2c_adap_lock_ops;
 	strlcpy(adap->adapter.name, "PMIC I2C Adapter",
 		sizeof(adap->adapter.name));
 	adap->adapter.dev.parent = &pdev->dev;
-- 
2.20.1


  parent reply	other threads:[~2019-09-29 17:35 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-29 17:35 [PATCH AUTOSEL 4.14 01/23] clk: jz4740: Add TCU clock Sasha Levin
2019-09-29 17:35 ` Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 02/23] MIPS: tlbex: Explicitly cast _PAGE_NO_EXEC to a boolean Sasha Levin
2019-09-29 17:35 ` Sasha Levin [this message]
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 04/23] mfd: intel-lpss: Remove D3cold delay Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 05/23] PCI: tegra: Fix OF node reference leak Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 06/23] livepatch: Nullify obj->mod in klp_module_coming()'s error path Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 07/23] ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 08/23] ARM: 8875/1: Kconfig: default to AEABI w/ Clang Sasha Levin
2019-09-29 18:08   ` Nathan Chancellor
2019-10-05 23:02     ` Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 09/23] MIPS: lantiq: update the clock alias' for the mainline PCIe PHY driver Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 10/23] firmware: bcm47xx_nvram: Correct size_t printf format Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 11/23] rtc: snvs: fix possible race condition Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 12/23] HID: apple: Fix stuck function keys when using FN Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 13/23] PCI: rockchip: Propagate errors for optional regulators Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 14/23] PCI: imx6: " Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 15/23] PCI: exynos: Propagate errors for optional PHYs Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 16/23] security: smack: Fix possible null-pointer dereferences in smack_socket_sock_rcv_skb() Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 17/23] ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 18/23] fat: work around race with userspace's read via blockdev while mounting Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 19/23] pktcdvd: remove warning on attempting to register non-passthrough dev Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 20/23] hypfs: Fix error number left in struct pointer member Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 21/23] kbuild: clean compressed initramfs image Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 22/23] ocfs2: wait for recovering done after direct unlock request Sasha Levin
2019-09-29 17:35 ` [PATCH AUTOSEL 4.14 23/23] kmemleak: increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE default to 16K Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190929173535.9744-3-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=hdegoede@redhat.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.