[PATCH] clk: Don't cache errors from clk_ops::get_phase()

[Stephen Boyd <sboyd@kernel.org>]

We don't check for errors from clk_ops::get_phase() before storing away
the result into the clk_core::phase member. This can lead to some fairly
confusing debugfs information if these ops do return an error. Let's
skip the store when this op fails to fix this. While we're here, move
the locking outside of clk_core_get_phase() to simplify callers from
the debugfs side.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---

Resending because I couldn't find this anywhere.

 drivers/clk/clk.c | 44 +++++++++++++++++++++++++++++---------------
 1 file changed, 29 insertions(+), 15 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 1c677d7f7f53..16add5626dfa 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2640,14 +2640,14 @@ EXPORT_SYMBOL_GPL(clk_set_phase);
 
 static int clk_core_get_phase(struct clk_core *core)
 {
-	int ret;
+	int ret = 0;
 
-	clk_prepare_lock();
+	lockdep_assert_held(&prepare_lock);
 	/* Always try to update cached phase if possible */
 	if (core->ops->get_phase)
-		core->phase = core->ops->get_phase(core->hw);
-	ret = core->phase;
-	clk_prepare_unlock();
+		ret = core->ops->get_phase(core->hw);
+	if (ret >= 0)
+		core->phase = ret;
 
 	return ret;
 }
@@ -2661,10 +2661,16 @@ static int clk_core_get_phase(struct clk_core *core)
  */
 int clk_get_phase(struct clk *clk)
 {
+	int ret;
+
 	if (!clk)
 		return 0;
 
-	return clk_core_get_phase(clk->core);
+	clk_prepare_unlock();
+	ret = clk_core_get_phase(clk->core);
+	clk_prepare_unlock();
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(clk_get_phase);
 
@@ -2878,13 +2884,21 @@ static struct hlist_head *orphan_list[] = {
 static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
 				 int level)
 {
-	seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %5d %6d\n",
+	int phase;
+
+	seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu ",
 		   level * 3 + 1, "",
 		   30 - level * 3, c->name,
 		   c->enable_count, c->prepare_count, c->protect_count,
-		   clk_core_get_rate(c), clk_core_get_accuracy(c),
-		   clk_core_get_phase(c),
-		   clk_core_get_scaled_duty_cycle(c, 100000));
+		   clk_core_get_rate(c), clk_core_get_accuracy(c));
+
+	phase = clk_core_get_phase(c);
+	if (phase >= 0)
+		seq_printf(s, "%5d", phase);
+	else
+		seq_puts(s, "-----");
+
+	seq_printf(s, " %6d\n", clk_core_get_scaled_duty_cycle(c, 100000));
 }
 
 static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
@@ -2921,6 +2935,7 @@ DEFINE_SHOW_ATTRIBUTE(clk_summary);
 
 static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
 {
+	int phase;
 	unsigned long min_rate, max_rate;
 
 	clk_core_get_boundaries(c, &min_rate, &max_rate);
@@ -2934,7 +2949,9 @@ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
 	seq_printf(s, "\"min_rate\": %lu,", min_rate);
 	seq_printf(s, "\"max_rate\": %lu,", max_rate);
 	seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy(c));
-	seq_printf(s, "\"phase\": %d,", clk_core_get_phase(c));
+	phase = clk_core_get_phase(c);
+	if (phase >= 0)
+		seq_printf(s, "\"phase\": %d,", phase);
 	seq_printf(s, "\"duty_cycle\": %u",
 		   clk_core_get_scaled_duty_cycle(c, 100000));
 }
@@ -3349,10 +3366,7 @@ static int __clk_core_init(struct clk_core *core)
 	 * Since a phase is by definition relative to its parent, just
 	 * query the current clock phase, or just assume it's in phase.
 	 */
-	if (core->ops->get_phase)
-		core->phase = core->ops->get_phase(core->hw);
-	else
-		core->phase = 0;
+	clk_core_get_phase(core);
 
 	/*
 	 * Set clk's duty cycle.
-- 
Sent by a computer through tubes