From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg KH Subject: Re: [PATCH v2 0/7] add Tegra194 XUSB host and pad controller support Date: Fri, 4 Oct 2019 14:23:22 +0200 Message-ID: <20191004122322.GB422178@kroah.com> References: <20191004081941.4831-1-jckuo@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20191004081941.4831-1-jckuo@nvidia.com> Sender: linux-kernel-owner@vger.kernel.org To: JC Kuo Cc: thierry.reding@gmail.com, jonathanh@nvidia.com, linux-tegra@vger.kernel.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, nkristam@nvidia.com, skomatineni@nvidia.com List-Id: linux-tegra@vger.kernel.org On Fri, Oct 04, 2019 at 04:19:34PM +0800, JC Kuo wrote: > Hi, > > This series introduces support for Tegra194 XUSB host and pad > controller. Tegra194 XUSB host and pad controller are highly > similar to the controllers found on Tegra186. Therefore, it's > possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194. > > JC Kuo (7): > xhci: tegra: Parameterize mailbox register addresses > usb: host: xhci-tegra: Add Tegra194 XHCI support > phy: tegra: xusb: Protect Tegra186 soc with config > phy: tegra: xusb: Add Tegra194 support > dt-bindings: phy: tegra: Add Tegra194 support > arm64: tegra: Add XUSB and pad controller on Tegra194 > arm64: tegra: Enable XUSB host in P2972-0000 board What changed from v1? You need to put that somewhere, usually in the patches themselves, below the --- line. Or at the very least, in the cover letter. Given that I can't find it anywhere here, I'll expect a v3 with that information to be sent soon :( thanks, greg k-h