From mboxrd@z Thu Jan  1 00:00:00 1970
From: Tom Rini <trini@konsulko.com>
Date: Fri, 4 Oct 2019 09:54:30 -0400
Subject: [U-Boot] [RESEND PATCH v3 1/2] Makefile: Add target to generate
 hex output for combined spl and dtb
In-Reply-To: <20190927182757.24084-1-dalon.westergreen@linux.intel.com>
References: <20190927182757.24084-1-dalon.westergreen@linux.intel.com>
Message-ID: <20191004135430.GA15735@bill-the-cat>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Fri, Sep 27, 2019 at 11:27:56AM -0700, Dalon Westergreen wrote:

> From: Dalon Westergreen <dalon.westergreen@intel.com>
> 
> Stratix10 requires a hex image of the spl plus spl devicetree offset to
> the Stratix10 onchip memory located at SPL_TEXT_BASE.  This patch adds
> a target to generate a hex file from the u-boot-spl binary including the
> dtb offset at SPL_TEST_BASE.
> 
> Objcopy is used to convert the $(SPL_BIN).bin, which includes the spl
> dtb, to a hex file.  the --change-address option is used to offset the
> hex to SPL_TEXT_BASE as objcopy on the spl binary will not result in
> a hex file appropriately offset at SPL_TEXT_BASE.
> 
> Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
> 
> ---
> Changes in v3:
>  -> Cleanup commit message and better describe the problem being
>     resolved
>  -> Remove extraneous hunk
>  -> use SPL_BIN instead of u-boot-spl
> Changes in v2:
>  -> Move spl hex file generation to SPL Makefile
>  -> Create hexfile from $(SPL_BIN).bin which will include the dtb
>     ifneq(build_dtb,)
> ---
>  Makefile             | 8 +++-----
>  scripts/Makefile.spl | 7 +++++++
>  2 files changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/Makefile b/Makefile
> index 1d9ade948b..0bc9d1589f 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -1152,11 +1152,6 @@ OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
>  		$(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
>  		$(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
>  
> -OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex)
> -
> -spl/u-boot-spl.hex: spl/u-boot-spl FORCE
> -	$(call if_changed,objcopy)
> -
>  binary_size_check: u-boot-nodtb.bin FORCE
>  	@file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
>  	map_size=$(shell cat u-boot.map | \
> @@ -1756,6 +1751,9 @@ spl/u-boot-spl.bin: spl/u-boot-spl
>  	@:
>  	$(SPL_SIZE_CHECK)
>  
> +spl/u-boot-spl.hex: spl/u-boot-spl
> +	@:
> +
>  spl/u-boot-spl: tools prepare \
>  		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
>  		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
> diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
> index 7af6b120b6..551002194e 100644
> --- a/scripts/Makefile.spl
> +++ b/scripts/Makefile.spl
> @@ -216,6 +216,8 @@ ifneq ($(CONFIG_TARGET_SOCFPGA_GEN5)$(CONFIG_TARGET_SOCFPGA_ARRIA10),)
>  ALL-y	+= $(obj)/$(SPL_BIN).sfp
>  endif
>  
> +ALL-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += $(obj)/$(SPL_BIN).hex
> +
>  ifdef CONFIG_ARCH_SUNXI
>  ALL-y	+= $(obj)/sunxi-spl.bin
>  
> @@ -363,6 +365,11 @@ endif
>  $(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE
>  	$(call if_changed,mkimage)
>  
> +OBJCOPYFLAGS_$(SPL_BIN).hex := -I binary -O ihex --change-address=$(CONFIG_SPL_TEXT_BASE)
> +
> +$(obj)/$(SPL_BIN).hex: $(obj)/$(SPL_BIN).bin FORCE
> +	$(call if_changed,objcopy)
> +
>  quiet_cmd_mksunxiboot = MKSUNXI $@
>  cmd_mksunxiboot = $(objtree)/tools/mksunxiboot \
>  			--default-dt $(CONFIG_DEFAULT_DEVICE_TREE) $< $@

SoCFPGA folks?  This has been posted a few times, is this OK for the
next release?  Thanks

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191004/6cd33708/attachment.sig>