[Patch v2 00/21] media: vpe: maintenance

[Patch v2 00/21] media: vpe: maintenance

[Benoit Parrot]

This a collection of backlog patches I have been carrying for the VPE
driver.

It adds supports for SEQ_BT as well as NV21.
And fixes a number of issues both through v4l2-compliance and normal
usage.

Changes since v1:
- Added a missing from my first set fixing a Makefile issue
- Added a csc table fix to match the technical specification
- Base on Hans' comment I reworked the last two patches which
  yielded one more patch
- This also led me to create additional patches to the
  v4l2_format_info table to simplify pixel encoding lookup

======================================
v4l2-compliance SHA: 5b168dc8473911227890526bad26553d9e8ff81b, 32 bits

Compliance test for vpe device /dev/video0:

Driver Info:
	Driver name      : vpe
	Card type        : vpe
	Bus info         : platform:vpe
	Driver version   : 5.3.0
	Capabilities     : 0x84204000
		Video Memory-to-Memory Multiplanar
		Streaming
		Extended Pix Format
		Device Capabilities
	Device Caps      : 0x04204000
		Video Memory-to-Memory Multiplanar
		Streaming
		Extended Pix Format

Required ioctls:
	test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
	test second /dev/video0 open: OK
	test VIDIOC_QUERYCAP: OK
	test VIDIOC_G/S_PRIORITY: OK
	test for unlimited opens: OK

Debug ioctls:
	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
	test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
	test VIDIOC_QUERYCTRL: OK
	test VIDIOC_G/S_CTRL: OK
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 1 Private Controls: 1

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK
	test VIDIOC_TRY_FMT: OK
	test VIDIOC_S_FMT: OK
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK
	test Composing: OK
	test Scaling: OK

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
		warn: v4l2-test-buffers.cpp(683): VIDIOC_CREATE_BUFS not supported
		warn: v4l2-test-buffers.cpp(683): VIDIOC_CREATE_BUFS not supported
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
	test VIDIOC_EXPBUF: OK
	test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
	test read/write: OK (Not Supported)
	test blocking wait: OK
	Video Capture Multiplanar: Captured 58 buffers    
	test MMAP (no poll): OK
	Video Capture Multiplanar: Captured 58 buffers    
	test MMAP (select): OK
	Video Capture Multiplanar: Captured 58 buffers    
	test MMAP (epoll): OK
	test USERPTR (no poll): OK (Not Supported)
	test USERPTR (select): OK (Not Supported)
	test DMABUF: Cannot test, specify --expbuf-device

Total for vpe device /dev/video0: 51, Succeeded: 51, Failed: 0, Warnings: 2
======================================

Benoit Parrot (18):
  media: ti-vpe: Fix a parallel build issue
  media: ti-vpe: vpe: Fix Motion Vector vpdma stride
  media: ti-vpe: vpe: Add missing null pointer checks
  media: ti-vpe: vpe: Remove unnecessary use of container_of
  media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel
    panic
  media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel
    format
  media: ti-vpe: vpe: Make sure YUYV is set as default format
  media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid
    sizeimage
  media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence
    number
  media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort
    cases
  media: ti-vpe: vpdma: Use fixed type for address in descriptor
  media: ti-vpe: Set the DMA mask and coherent mask
  media: ti-vpe: vpe: use standard struct instead of duplicating fields
  media: ti-vpe: vpe: fix v4l2_compliance issue related to xfer_func
  media: ti-vpe: csc: rgb-to-yuv HD full range coeff are wrong
  media: v4l2-common: add pixel encoding support
  media: v4l2-common: add RGB565 and RGB55 to v4l2_format_info
  media: ti-vpe: vpe: don't rely on colorspace member for conversion

Nikhil Devshatwar (2):
  media: ti-vpe: Add support for SEQ_BT
  media: ti-vpe: Add support for NV21 format

Ram Prasad (1):
  media: ti-vpe: Set MAX height supported to 2048 pixels

 drivers/media/platform/Makefile            |   4 +-
 drivers/media/platform/ti-vpe/csc.c        | 220 +++++++-----
 drivers/media/platform/ti-vpe/csc.h        |   4 +-
 drivers/media/platform/ti-vpe/vpdma.c      |  11 +-
 drivers/media/platform/ti-vpe/vpdma.h      |   2 +
 drivers/media/platform/ti-vpe/vpdma_priv.h |   5 +-
 drivers/media/platform/ti-vpe/vpe.c        | 379 ++++++++++++---------
 drivers/media/v4l2-core/v4l2-common.c      | 164 +++++----
 include/media/v4l2-common.h                |  20 ++
 9 files changed, 496 insertions(+), 313 deletions(-)

-- 
2.17.1

[Patch v2 00/21] media: vpe: maintenance

[Benoit Parrot]

This a collection of backlog patches I have been carrying for the VPE
driver.

It adds supports for SEQ_BT as well as NV21.
And fixes a number of issues both through v4l2-compliance and normal
usage.

Changes since v1:
- Added a missing from my first set fixing a Makefile issue
- Added a csc table fix to match the technical specification
- Base on Hans' comment I reworked the last two patches which
  yielded one more patch
- This also led me to create additional patches to the
  v4l2_format_info table to simplify pixel encoding lookup

======================================
v4l2-compliance SHA: 5b168dc8473911227890526bad26553d9e8ff81b, 32 bits

Compliance test for vpe device /dev/video0:

Driver Info:
	Driver name      : vpe
	Card type        : vpe
	Bus info         : platform:vpe
	Driver version   : 5.3.0
	Capabilities     : 0x84204000
		Video Memory-to-Memory Multiplanar
		Streaming
		Extended Pix Format
		Device Capabilities
	Device Caps      : 0x04204000
		Video Memory-to-Memory Multiplanar
		Streaming
		Extended Pix Format

Required ioctls:
	test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
	test second /dev/video0 open: OK
	test VIDIOC_QUERYCAP: OK
	test VIDIOC_G/S_PRIORITY: OK
	test for unlimited opens: OK

Debug ioctls:
	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
	test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
	test VIDIOC_QUERYCTRL: OK
	test VIDIOC_G/S_CTRL: OK
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 1 Private Controls: 1

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK
	test VIDIOC_TRY_FMT: OK
	test VIDIOC_S_FMT: OK
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK
	test Composing: OK
	test Scaling: OK

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
		warn: v4l2-test-buffers.cpp(683): VIDIOC_CREATE_BUFS not supported
		warn: v4l2-test-buffers.cpp(683): VIDIOC_CREATE_BUFS not supported
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
	test VIDIOC_EXPBUF: OK
	test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
	test read/write: OK (Not Supported)
	test blocking wait: OK
	Video Capture Multiplanar: Captured 58 buffers    
	test MMAP (no poll): OK
	Video Capture Multiplanar: Captured 58 buffers    
	test MMAP (select): OK
	Video Capture Multiplanar: Captured 58 buffers    
	test MMAP (epoll): OK
	test USERPTR (no poll): OK (Not Supported)
	test USERPTR (select): OK (Not Supported)
	test DMABUF: Cannot test, specify --expbuf-device

Total for vpe device /dev/video0: 51, Succeeded: 51, Failed: 0, Warnings: 2
======================================

Benoit Parrot (18):
  media: ti-vpe: Fix a parallel build issue
  media: ti-vpe: vpe: Fix Motion Vector vpdma stride
  media: ti-vpe: vpe: Add missing null pointer checks
  media: ti-vpe: vpe: Remove unnecessary use of container_of
  media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel
    panic
  media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel
    format
  media: ti-vpe: vpe: Make sure YUYV is set as default format
  media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid
    sizeimage
  media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence
    number
  media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort
    cases
  media: ti-vpe: vpdma: Use fixed type for address in descriptor
  media: ti-vpe: Set the DMA mask and coherent mask
  media: ti-vpe: vpe: use standard struct instead of duplicating fields
  media: ti-vpe: vpe: fix v4l2_compliance issue related to xfer_func
  media: ti-vpe: csc: rgb-to-yuv HD full range coeff are wrong
  media: v4l2-common: add pixel encoding support
  media: v4l2-common: add RGB565 and RGB55 to v4l2_format_info
  media: ti-vpe: vpe: don't rely on colorspace member for conversion

Nikhil Devshatwar (2):
  media: ti-vpe: Add support for SEQ_BT
  media: ti-vpe: Add support for NV21 format

Ram Prasad (1):
  media: ti-vpe: Set MAX height supported to 2048 pixels

 drivers/media/platform/Makefile            |   4 +-
 drivers/media/platform/ti-vpe/csc.c        | 220 +++++++-----
 drivers/media/platform/ti-vpe/csc.h        |   4 +-
 drivers/media/platform/ti-vpe/vpdma.c      |  11 +-
 drivers/media/platform/ti-vpe/vpdma.h      |   2 +
 drivers/media/platform/ti-vpe/vpdma_priv.h |   5 +-
 drivers/media/platform/ti-vpe/vpe.c        | 379 ++++++++++++---------
 drivers/media/v4l2-core/v4l2-common.c      | 164 +++++----
 include/media/v4l2-common.h                |  20 ++
 9 files changed, 496 insertions(+), 313 deletions(-)

-- 
2.17.1

[Patch v2 01/21] media: ti-vpe: Fix a parallel build issue

[Benoit Parrot]

When TI CAL was introduce as another driver under platform/ti-vpe
adding a second entry into the ti-vpe directory in the platform
Makefile caused issues during parallel build.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/media/platform/Makefile | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index 6ee7eb0d36f4..d13db96e3015 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -19,9 +19,7 @@ obj-$(CONFIG_VIDEO_VIVID)		+= vivid/
 obj-$(CONFIG_VIDEO_VIM2M)		+= vim2m.o
 obj-$(CONFIG_VIDEO_VICODEC)		+= vicodec/
 
-obj-$(CONFIG_VIDEO_TI_VPE)		+= ti-vpe/
-
-obj-$(CONFIG_VIDEO_TI_CAL)		+= ti-vpe/
+obj-y	+= ti-vpe/
 
 obj-$(CONFIG_VIDEO_MX2_EMMAPRP)		+= mx2_emmaprp.o
 obj-$(CONFIG_VIDEO_CODA)		+= coda/
-- 
2.17.1

[Patch v2 01/21] media: ti-vpe: Fix a parallel build issue

[Benoit Parrot]

When TI CAL was introduce as another driver under platform/ti-vpe
adding a second entry into the ti-vpe directory in the platform
Makefile caused issues during parallel build.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/media/platform/Makefile | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index 6ee7eb0d36f4..d13db96e3015 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -19,9 +19,7 @@ obj-$(CONFIG_VIDEO_VIVID)		+= vivid/
 obj-$(CONFIG_VIDEO_VIM2M)		+= vim2m.o
 obj-$(CONFIG_VIDEO_VICODEC)		+= vicodec/
 
-obj-$(CONFIG_VIDEO_TI_VPE)		+= ti-vpe/
-
-obj-$(CONFIG_VIDEO_TI_CAL)		+= ti-vpe/
+obj-y	+= ti-vpe/
 
 obj-$(CONFIG_VIDEO_MX2_EMMAPRP)		+= mx2_emmaprp.o
 obj-$(CONFIG_VIDEO_CODA)		+= coda/
-- 
2.17.1

[Patch v2 02/21] media: ti-vpe: vpe: Fix Motion Vector vpdma stride

[Benoit Parrot]

commit 52831a418fa6 ("[media] media: ti-vpe: vpe: allow use of user
specified stride") and commit 8c1e4fa17e92 ("[media] media: ti-vpe: vpdma:
add support for user specified stride") resulted in the Motion Vector
stride to be the same as the image stride.

This caused memory corruption in the output image as mentionned in
commit 44f98adf71a8 ("[media] media: ti-vpe: vpe: Fix line stride
for output motion vector").

Fixes: 52831a418fa6 ("[media] media: ti-vpe: vpe: allow use of user specified stride")
Fixes: 8c1e4fa17e92 ("[media] media: ti-vpe: vpdma: add support for user specified stride")
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Nikhil Devshatwar <nikhil.nd@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 60b575bb44c4..5ba72445584d 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1013,11 +1013,14 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 	dma_addr_t dma_addr;
 	u32 flags = 0;
 	u32 offset = 0;
+	u32 stride;
 
 	if (port == VPE_PORT_MV_OUT) {
 		vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
 		dma_addr = ctx->mv_buf_dma[mv_buf_selector];
 		q_data = &ctx->q_data[Q_DATA_SRC];
+		stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
+			       VPDMA_STRIDE_ALIGN);
 	} else {
 		/* to incorporate interleaved formats */
 		int plane = fmt->coplanar ? p_data->vb_part : 0;
@@ -1044,6 +1047,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 		}
 		/* Apply the offset */
 		dma_addr += offset;
+		stride = q_data->bytesperline[VPE_LUMA];
 	}
 
 	if (q_data->flags & Q_DATA_FRAME_1D)
@@ -1055,7 +1059,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 			   MAX_W, MAX_H);
 
 	vpdma_add_out_dtd(&ctx->desc_list, q_data->width,
-			  q_data->bytesperline[VPE_LUMA], &q_data->c_rect,
+			  stride, &q_data->c_rect,
 			  vpdma_fmt, dma_addr, MAX_OUT_WIDTH_REG1,
 			  MAX_OUT_HEIGHT_REG1, p_data->channel, flags);
 }
@@ -1074,10 +1078,13 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 	dma_addr_t dma_addr;
 	u32 flags = 0;
 	u32 offset = 0;
+	u32 stride;
 
 	if (port == VPE_PORT_MV_IN) {
 		vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
 		dma_addr = ctx->mv_buf_dma[mv_buf_selector];
+		stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
+			       VPDMA_STRIDE_ALIGN);
 	} else {
 		/* to incorporate interleaved formats */
 		int plane = fmt->coplanar ? p_data->vb_part : 0;
@@ -1104,6 +1111,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 		}
 		/* Apply the offset */
 		dma_addr += offset;
+		stride = q_data->bytesperline[VPE_LUMA];
 
 		if (q_data->flags & Q_DATA_INTERLACED_SEQ_TB) {
 			/*
@@ -1139,10 +1147,10 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 	if (p_data->vb_part && fmt->fourcc == V4L2_PIX_FMT_NV12)
 		frame_height /= 2;
 
-	vpdma_add_in_dtd(&ctx->desc_list, q_data->width,
-			 q_data->bytesperline[VPE_LUMA], &q_data->c_rect,
-		vpdma_fmt, dma_addr, p_data->channel, field, flags, frame_width,
-		frame_height, 0, 0);
+	vpdma_add_in_dtd(&ctx->desc_list, q_data->width, stride,
+			 &q_data->c_rect, vpdma_fmt, dma_addr,
+			 p_data->channel, field, flags, frame_width,
+			 frame_height, 0, 0);
 }
 
 /*
-- 
2.17.1

[Patch v2 02/21] media: ti-vpe: vpe: Fix Motion Vector vpdma stride

[Benoit Parrot]

commit 52831a418fa6 ("[media] media: ti-vpe: vpe: allow use of user
specified stride") and commit 8c1e4fa17e92 ("[media] media: ti-vpe: vpdma:
add support for user specified stride") resulted in the Motion Vector
stride to be the same as the image stride.

This caused memory corruption in the output image as mentionned in
commit 44f98adf71a8 ("[media] media: ti-vpe: vpe: Fix line stride
for output motion vector").

Fixes: 52831a418fa6 ("[media] media: ti-vpe: vpe: allow use of user specified stride")
Fixes: 8c1e4fa17e92 ("[media] media: ti-vpe: vpdma: add support for user specified stride")
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Nikhil Devshatwar <nikhil.nd@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 60b575bb44c4..5ba72445584d 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1013,11 +1013,14 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 	dma_addr_t dma_addr;
 	u32 flags = 0;
 	u32 offset = 0;
+	u32 stride;
 
 	if (port == VPE_PORT_MV_OUT) {
 		vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
 		dma_addr = ctx->mv_buf_dma[mv_buf_selector];
 		q_data = &ctx->q_data[Q_DATA_SRC];
+		stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
+			       VPDMA_STRIDE_ALIGN);
 	} else {
 		/* to incorporate interleaved formats */
 		int plane = fmt->coplanar ? p_data->vb_part : 0;
@@ -1044,6 +1047,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 		}
 		/* Apply the offset */
 		dma_addr += offset;
+		stride = q_data->bytesperline[VPE_LUMA];
 	}
 
 	if (q_data->flags & Q_DATA_FRAME_1D)
@@ -1055,7 +1059,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 			   MAX_W, MAX_H);
 
 	vpdma_add_out_dtd(&ctx->desc_list, q_data->width,
-			  q_data->bytesperline[VPE_LUMA], &q_data->c_rect,
+			  stride, &q_data->c_rect,
 			  vpdma_fmt, dma_addr, MAX_OUT_WIDTH_REG1,
 			  MAX_OUT_HEIGHT_REG1, p_data->channel, flags);
 }
@@ -1074,10 +1078,13 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 	dma_addr_t dma_addr;
 	u32 flags = 0;
 	u32 offset = 0;
+	u32 stride;
 
 	if (port == VPE_PORT_MV_IN) {
 		vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
 		dma_addr = ctx->mv_buf_dma[mv_buf_selector];
+		stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
+			       VPDMA_STRIDE_ALIGN);
 	} else {
 		/* to incorporate interleaved formats */
 		int plane = fmt->coplanar ? p_data->vb_part : 0;
@@ -1104,6 +1111,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 		}
 		/* Apply the offset */
 		dma_addr += offset;
+		stride = q_data->bytesperline[VPE_LUMA];
 
 		if (q_data->flags & Q_DATA_INTERLACED_SEQ_TB) {
 			/*
@@ -1139,10 +1147,10 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 	if (p_data->vb_part && fmt->fourcc == V4L2_PIX_FMT_NV12)
 		frame_height /= 2;
 
-	vpdma_add_in_dtd(&ctx->desc_list, q_data->width,
-			 q_data->bytesperline[VPE_LUMA], &q_data->c_rect,
-		vpdma_fmt, dma_addr, p_data->channel, field, flags, frame_width,
-		frame_height, 0, 0);
+	vpdma_add_in_dtd(&ctx->desc_list, q_data->width, stride,
+			 &q_data->c_rect, vpdma_fmt, dma_addr,
+			 p_data->channel, field, flags, frame_width,
+			 frame_height, 0, 0);
 }
 
 /*
-- 
2.17.1

[Patch v2 03/21] media: ti-vpe: vpe: Add missing null pointer checks

[Benoit Parrot]

A few NULL pointer checks were missing.
Add check with appropriate return code.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 5ba72445584d..56f60dbea15c 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1537,6 +1537,8 @@ static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
 		return -EINVAL;
 
 	q_data = get_q_data(ctx, f->type);
+	if (!q_data)
+		return -EINVAL;
 
 	pix->width = q_data->width;
 	pix->height = q_data->height;
@@ -2001,6 +2003,8 @@ static int vpe_queue_setup(struct vb2_queue *vq,
 	struct vpe_q_data *q_data;
 
 	q_data = get_q_data(ctx, vq->type);
+	if (!q_data)
+		return -EINVAL;
 
 	*nplanes = q_data->nplanes;
 
@@ -2025,6 +2029,8 @@ static int vpe_buf_prepare(struct vb2_buffer *vb)
 	vpe_dbg(ctx->dev, "type: %d\n", vb->vb2_queue->type);
 
 	q_data = get_q_data(ctx, vb->vb2_queue->type);
+	if (!q_data)
+		return -EINVAL;
 	num_planes = q_data->nplanes;
 
 	if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
@@ -2481,7 +2487,12 @@ static int vpe_probe(struct platform_device *pdev)
 	mutex_init(&dev->dev_mutex);
 
 	dev->res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-			"vpe_top");
+						"vpe_top");
+	if (!dev->res) {
+		dev_err(&pdev->dev, "missing 'vpe_top' resources data\n");
+		return -ENODEV;
+	}
+
 	/*
 	 * HACK: we get resource info from device tree in the form of a list of
 	 * VPE sub blocks, the driver currently uses only the base of vpe_top
-- 
2.17.1

[Patch v2 03/21] media: ti-vpe: vpe: Add missing null pointer checks

[Benoit Parrot]

A few NULL pointer checks were missing.
Add check with appropriate return code.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 5ba72445584d..56f60dbea15c 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1537,6 +1537,8 @@ static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
 		return -EINVAL;
 
 	q_data = get_q_data(ctx, f->type);
+	if (!q_data)
+		return -EINVAL;
 
 	pix->width = q_data->width;
 	pix->height = q_data->height;
@@ -2001,6 +2003,8 @@ static int vpe_queue_setup(struct vb2_queue *vq,
 	struct vpe_q_data *q_data;
 
 	q_data = get_q_data(ctx, vq->type);
+	if (!q_data)
+		return -EINVAL;
 
 	*nplanes = q_data->nplanes;
 
@@ -2025,6 +2029,8 @@ static int vpe_buf_prepare(struct vb2_buffer *vb)
 	vpe_dbg(ctx->dev, "type: %d\n", vb->vb2_queue->type);
 
 	q_data = get_q_data(ctx, vb->vb2_queue->type);
+	if (!q_data)
+		return -EINVAL;
 	num_planes = q_data->nplanes;
 
 	if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
@@ -2481,7 +2487,12 @@ static int vpe_probe(struct platform_device *pdev)
 	mutex_init(&dev->dev_mutex);
 
 	dev->res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-			"vpe_top");
+						"vpe_top");
+	if (!dev->res) {
+		dev_err(&pdev->dev, "missing 'vpe_top' resources data\n");
+		return -ENODEV;
+	}
+
 	/*
 	 * HACK: we get resource info from device tree in the form of a list of
 	 * VPE sub blocks, the driver currently uses only the base of vpe_top
-- 
2.17.1

[Patch v2 04/21] media: ti-vpe: vpe: Remove unnecessary use of container_of

[Benoit Parrot]

Instead of saving a pointer to the 'fh' member of struct vpe_ctx to
later have to use container_of to retrieve the actual pointer to the
context structure, which seems to confuse static code analysis tool
anyways, just save the pointer to the actual structure and then retrieve
it directly.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 56f60dbea15c..0e9cb0319a92 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -900,14 +900,6 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
 	return 0;
 }
 
-/*
- * Return the vpe_ctx structure for a given struct file
- */
-static struct vpe_ctx *file2ctx(struct file *file)
-{
-	return container_of(file->private_data, struct vpe_ctx, fh);
-}
-
 /*
  * mem2mem callbacks
  */
@@ -1527,7 +1519,7 @@ static int vpe_enum_fmt(struct file *file, void *priv,
 static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
 {
 	struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
-	struct vpe_ctx *ctx = file2ctx(file);
+	struct vpe_ctx *ctx = file->private_data;
 	struct vb2_queue *vq;
 	struct vpe_q_data *q_data;
 	int i;
@@ -1689,7 +1681,7 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 
 static int vpe_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
 {
-	struct vpe_ctx *ctx = file2ctx(file);
+	struct vpe_ctx *ctx = file->private_data;
 	struct vpe_fmt *fmt = find_format(f);
 
 	if (V4L2_TYPE_IS_OUTPUT(f->type))
@@ -1762,7 +1754,7 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
 static int vpe_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
 {
 	int ret;
-	struct vpe_ctx *ctx = file2ctx(file);
+	struct vpe_ctx *ctx = file->private_data;
 
 	ret = vpe_try_fmt(file, priv, f);
 	if (ret)
@@ -1847,7 +1839,7 @@ static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
 static int vpe_g_selection(struct file *file, void *fh,
 		struct v4l2_selection *s)
 {
-	struct vpe_ctx *ctx = file2ctx(file);
+	struct vpe_ctx *ctx = file->private_data;
 	struct vpe_q_data *q_data;
 	bool use_c_rect = false;
 
@@ -1908,7 +1900,7 @@ static int vpe_g_selection(struct file *file, void *fh,
 static int vpe_s_selection(struct file *file, void *fh,
 		struct v4l2_selection *s)
 {
-	struct vpe_ctx *ctx = file2ctx(file);
+	struct vpe_ctx *ctx = file->private_data;
 	struct vpe_q_data *q_data;
 	struct v4l2_selection sel = *s;
 	int ret;
@@ -2275,7 +2267,7 @@ static int vpe_open(struct file *file)
 	init_adb_hdrs(ctx);
 
 	v4l2_fh_init(&ctx->fh, video_devdata(file));
-	file->private_data = &ctx->fh;
+	file->private_data = ctx;
 
 	hdl = &ctx->hdl;
 	v4l2_ctrl_handler_init(hdl, 1);
@@ -2360,7 +2352,7 @@ static int vpe_open(struct file *file)
 static int vpe_release(struct file *file)
 {
 	struct vpe_dev *dev = video_drvdata(file);
-	struct vpe_ctx *ctx = file2ctx(file);
+	struct vpe_ctx *ctx = file->private_data;
 
 	vpe_dbg(dev, "releasing instance %p\n", ctx);
 
-- 
2.17.1

[Patch v2 04/21] media: ti-vpe: vpe: Remove unnecessary use of container_of

[Benoit Parrot]

Instead of saving a pointer to the 'fh' member of struct vpe_ctx to
later have to use container_of to retrieve the actual pointer to the
context structure, which seems to confuse static code analysis tool
anyways, just save the pointer to the actual structure and then retrieve
it directly.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 56f60dbea15c..0e9cb0319a92 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -900,14 +900,6 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
 	return 0;
 }
 
-/*
- * Return the vpe_ctx structure for a given struct file
- */
-static struct vpe_ctx *file2ctx(struct file *file)
-{
-	return container_of(file->private_data, struct vpe_ctx, fh);
-}
-
 /*
  * mem2mem callbacks
  */
@@ -1527,7 +1519,7 @@ static int vpe_enum_fmt(struct file *file, void *priv,
 static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
 {
 	struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
-	struct vpe_ctx *ctx = file2ctx(file);
+	struct vpe_ctx *ctx = file->private_data;
 	struct vb2_queue *vq;
 	struct vpe_q_data *q_data;
 	int i;
@@ -1689,7 +1681,7 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 
 static int vpe_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
 {
-	struct vpe_ctx *ctx = file2ctx(file);
+	struct vpe_ctx *ctx = file->private_data;
 	struct vpe_fmt *fmt = find_format(f);
 
 	if (V4L2_TYPE_IS_OUTPUT(f->type))
@@ -1762,7 +1754,7 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
 static int vpe_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
 {
 	int ret;
-	struct vpe_ctx *ctx = file2ctx(file);
+	struct vpe_ctx *ctx = file->private_data;
 
 	ret = vpe_try_fmt(file, priv, f);
 	if (ret)
@@ -1847,7 +1839,7 @@ static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
 static int vpe_g_selection(struct file *file, void *fh,
 		struct v4l2_selection *s)
 {
-	struct vpe_ctx *ctx = file2ctx(file);
+	struct vpe_ctx *ctx = file->private_data;
 	struct vpe_q_data *q_data;
 	bool use_c_rect = false;
 
@@ -1908,7 +1900,7 @@ static int vpe_g_selection(struct file *file, void *fh,
 static int vpe_s_selection(struct file *file, void *fh,
 		struct v4l2_selection *s)
 {
-	struct vpe_ctx *ctx = file2ctx(file);
+	struct vpe_ctx *ctx = file->private_data;
 	struct vpe_q_data *q_data;
 	struct v4l2_selection sel = *s;
 	int ret;
@@ -2275,7 +2267,7 @@ static int vpe_open(struct file *file)
 	init_adb_hdrs(ctx);
 
 	v4l2_fh_init(&ctx->fh, video_devdata(file));
-	file->private_data = &ctx->fh;
+	file->private_data = ctx;
 
 	hdl = &ctx->hdl;
 	v4l2_ctrl_handler_init(hdl, 1);
@@ -2360,7 +2352,7 @@ static int vpe_open(struct file *file)
 static int vpe_release(struct file *file)
 {
 	struct vpe_dev *dev = video_drvdata(file);
-	struct vpe_ctx *ctx = file2ctx(file);
+	struct vpe_ctx *ctx = file->private_data;
 
 	vpe_dbg(dev, "releasing instance %p\n", ctx);
 
-- 
2.17.1

[Patch v2 05/21] media: ti-vpe: Add support for SEQ_BT

[Benoit Parrot]

From: Nikhil Devshatwar <nikhil.nd@ti.com>

SEQ_BT indicates the buffer for bottom field needs to be processed
before the top field.

Simplify the field selection logic to support SEQ_BT as well.

Modify the interlace flags to include any of alternate, SEQ_TB, SEQ_BT.
Update other format error checking to consider SEQ_BT.
Replace SEQ_TB with SEQ_XX wherever applicable.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 73 ++++++++++++++++++-----------
 1 file changed, 46 insertions(+), 27 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 0e9cb0319a92..5d0ec5f7ca25 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -328,9 +328,14 @@ struct vpe_q_data {
 #define	Q_DATA_MODE_TILED		BIT(1)
 #define	Q_DATA_INTERLACED_ALTERNATE	BIT(2)
 #define	Q_DATA_INTERLACED_SEQ_TB	BIT(3)
+#define	Q_DATA_INTERLACED_SEQ_BT	BIT(4)
+
+#define Q_IS_SEQ_XX		(Q_DATA_INTERLACED_SEQ_TB | \
+				Q_DATA_INTERLACED_SEQ_BT)
 
 #define Q_IS_INTERLACED		(Q_DATA_INTERLACED_ALTERNATE | \
-				Q_DATA_INTERLACED_SEQ_TB)
+				Q_DATA_INTERLACED_SEQ_TB | \
+				Q_DATA_INTERLACED_SEQ_BT)
 
 enum {
 	Q_DATA_SRC = 0,
@@ -1105,24 +1110,31 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 		dma_addr += offset;
 		stride = q_data->bytesperline[VPE_LUMA];
 
-		if (q_data->flags & Q_DATA_INTERLACED_SEQ_TB) {
-			/*
-			 * Use top or bottom field from same vb alternately
-			 * f,f-1,f-2 = TBT when seq is even
-			 * f,f-1,f-2 = BTB when seq is odd
-			 */
-			field = (p_data->vb_index + (ctx->sequence % 2)) % 2;
+		/*
+		 * field used in VPDMA desc  = 0 (top) / 1 (bottom)
+		 * Use top or bottom field from same vb alternately
+		 * For each de-interlacing operation, f,f-1,f-2 should be one
+		 * of TBT or BTB
+		 */
+		if (q_data->flags & Q_DATA_INTERLACED_SEQ_TB ||
+		    q_data->flags & Q_DATA_INTERLACED_SEQ_BT) {
+			/* Select initial value based on format */
+			if (q_data->flags & Q_DATA_INTERLACED_SEQ_BT)
+				field = 1;
+			else
+				field = 0;
+
+			/* Toggle for each vb_index and each operation */
+			field = (field + p_data->vb_index + ctx->sequence) % 2;
 
 			if (field) {
-				/*
-				 * bottom field of a SEQ_TB buffer
-				 * Skip the top field data by
-				 */
 				int height = q_data->height / 2;
 				int bpp = fmt->fourcc == V4L2_PIX_FMT_NV12 ?
 						1 : (vpdma_fmt->depth >> 3);
+
 				if (plane)
 					height /= 2;
+
 				dma_addr += q_data->width * height * bpp;
 			}
 		}
@@ -1177,12 +1189,14 @@ static void device_run(void *priv)
 	struct vpe_q_data *d_q_data = &ctx->q_data[Q_DATA_DST];
 	struct vpe_q_data *s_q_data = &ctx->q_data[Q_DATA_SRC];
 
-	if (ctx->deinterlacing && s_q_data->flags & Q_DATA_INTERLACED_SEQ_TB &&
-		ctx->sequence % 2 == 0) {
-		/* When using SEQ_TB buffers, When using it first time,
-		 * No need to remove the buffer as the next field is present
-		 * in the same buffer. (so that job_ready won't fail)
-		 * It will be removed when using bottom field
+	if (ctx->deinterlacing && s_q_data->flags & Q_IS_SEQ_XX &&
+	    ctx->sequence % 2 == 0) {
+		/* When using SEQ_XX type buffers, each buffer has two fields
+		 * each buffer has two fields (top & bottom)
+		 * Removing one buffer is actually getting two fields
+		 * Alternate between two operations:-
+		 * Even : consume one field but DO NOT REMOVE from queue
+		 * Odd : consume other field and REMOVE from queue
 		 */
 		ctx->src_vbs[0] = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
 		WARN_ON(ctx->src_vbs[0] == NULL);
@@ -1573,8 +1587,10 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 		return -EINVAL;
 	}
 
-	if (pix->field != V4L2_FIELD_NONE && pix->field != V4L2_FIELD_ALTERNATE
-			&& pix->field != V4L2_FIELD_SEQ_TB)
+	if (pix->field != V4L2_FIELD_NONE &&
+	    pix->field != V4L2_FIELD_ALTERNATE &&
+	    pix->field != V4L2_FIELD_SEQ_TB &&
+	    pix->field != V4L2_FIELD_SEQ_BT)
 		pix->field = V4L2_FIELD_NONE;
 
 	depth = fmt->vpdma_fmt[VPE_LUMA]->depth;
@@ -1626,9 +1642,9 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 
 	/*
 	 * For the actual image parameters, we need to consider the field
-	 * height of the image for SEQ_TB buffers.
+	 * height of the image for SEQ_XX buffers.
 	 */
-	if (pix->field == V4L2_FIELD_SEQ_TB)
+	if (pix->field == V4L2_FIELD_SEQ_TB || pix->field == V4L2_FIELD_SEQ_BT)
 		height = pix->height / 2;
 	else
 		height = pix->height;
@@ -1734,11 +1750,13 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
 		q_data->flags |= Q_DATA_INTERLACED_ALTERNATE;
 	else if (q_data->field == V4L2_FIELD_SEQ_TB)
 		q_data->flags |= Q_DATA_INTERLACED_SEQ_TB;
+	else if (q_data->field == V4L2_FIELD_SEQ_BT)
+		q_data->flags |= Q_DATA_INTERLACED_SEQ_BT;
 	else
 		q_data->flags &= ~Q_IS_INTERLACED;
 
-	/* the crop height is halved for the case of SEQ_TB buffers */
-	if (q_data->flags & Q_DATA_INTERLACED_SEQ_TB)
+	/* the crop height is halved for the case of SEQ_XX buffers */
+	if (q_data->flags & Q_IS_SEQ_XX)
 		q_data->c_rect.height /= 2;
 
 	vpe_dbg(ctx->dev, "Setting format for type %d, wxh: %dx%d, fmt: %d bpl_y %d",
@@ -1811,10 +1829,10 @@ static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
 	}
 
 	/*
-	 * For SEQ_TB buffers, crop height should be less than the height of
+	 * For SEQ_XX buffers, crop height should be less than the height of
 	 * the field height, not the buffer height
 	 */
-	if (q_data->flags & Q_DATA_INTERLACED_SEQ_TB)
+	if (q_data->flags & Q_IS_SEQ_XX)
 		height = q_data->height / 2;
 	else
 		height = q_data->height;
@@ -2031,7 +2049,8 @@ static int vpe_buf_prepare(struct vb2_buffer *vb)
 		} else {
 			if (vbuf->field != V4L2_FIELD_TOP &&
 			    vbuf->field != V4L2_FIELD_BOTTOM &&
-			    vbuf->field != V4L2_FIELD_SEQ_TB)
+			    vbuf->field != V4L2_FIELD_SEQ_TB &&
+			    vbuf->field != V4L2_FIELD_SEQ_BT)
 				return -EINVAL;
 		}
 	}
-- 
2.17.1

[Patch v2 05/21] media: ti-vpe: Add support for SEQ_BT

[Benoit Parrot]

From: Nikhil Devshatwar <nikhil.nd@ti.com>

SEQ_BT indicates the buffer for bottom field needs to be processed
before the top field.

Simplify the field selection logic to support SEQ_BT as well.

Modify the interlace flags to include any of alternate, SEQ_TB, SEQ_BT.
Update other format error checking to consider SEQ_BT.
Replace SEQ_TB with SEQ_XX wherever applicable.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 73 ++++++++++++++++++-----------
 1 file changed, 46 insertions(+), 27 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 0e9cb0319a92..5d0ec5f7ca25 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -328,9 +328,14 @@ struct vpe_q_data {
 #define	Q_DATA_MODE_TILED		BIT(1)
 #define	Q_DATA_INTERLACED_ALTERNATE	BIT(2)
 #define	Q_DATA_INTERLACED_SEQ_TB	BIT(3)
+#define	Q_DATA_INTERLACED_SEQ_BT	BIT(4)
+
+#define Q_IS_SEQ_XX		(Q_DATA_INTERLACED_SEQ_TB | \
+				Q_DATA_INTERLACED_SEQ_BT)
 
 #define Q_IS_INTERLACED		(Q_DATA_INTERLACED_ALTERNATE | \
-				Q_DATA_INTERLACED_SEQ_TB)
+				Q_DATA_INTERLACED_SEQ_TB | \
+				Q_DATA_INTERLACED_SEQ_BT)
 
 enum {
 	Q_DATA_SRC = 0,
@@ -1105,24 +1110,31 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 		dma_addr += offset;
 		stride = q_data->bytesperline[VPE_LUMA];
 
-		if (q_data->flags & Q_DATA_INTERLACED_SEQ_TB) {
-			/*
-			 * Use top or bottom field from same vb alternately
-			 * f,f-1,f-2 = TBT when seq is even
-			 * f,f-1,f-2 = BTB when seq is odd
-			 */
-			field = (p_data->vb_index + (ctx->sequence % 2)) % 2;
+		/*
+		 * field used in VPDMA desc  = 0 (top) / 1 (bottom)
+		 * Use top or bottom field from same vb alternately
+		 * For each de-interlacing operation, f,f-1,f-2 should be one
+		 * of TBT or BTB
+		 */
+		if (q_data->flags & Q_DATA_INTERLACED_SEQ_TB ||
+		    q_data->flags & Q_DATA_INTERLACED_SEQ_BT) {
+			/* Select initial value based on format */
+			if (q_data->flags & Q_DATA_INTERLACED_SEQ_BT)
+				field = 1;
+			else
+				field = 0;
+
+			/* Toggle for each vb_index and each operation */
+			field = (field + p_data->vb_index + ctx->sequence) % 2;
 
 			if (field) {
-				/*
-				 * bottom field of a SEQ_TB buffer
-				 * Skip the top field data by
-				 */
 				int height = q_data->height / 2;
 				int bpp = fmt->fourcc == V4L2_PIX_FMT_NV12 ?
 						1 : (vpdma_fmt->depth >> 3);
+
 				if (plane)
 					height /= 2;
+
 				dma_addr += q_data->width * height * bpp;
 			}
 		}
@@ -1177,12 +1189,14 @@ static void device_run(void *priv)
 	struct vpe_q_data *d_q_data = &ctx->q_data[Q_DATA_DST];
 	struct vpe_q_data *s_q_data = &ctx->q_data[Q_DATA_SRC];
 
-	if (ctx->deinterlacing && s_q_data->flags & Q_DATA_INTERLACED_SEQ_TB &&
-		ctx->sequence % 2 == 0) {
-		/* When using SEQ_TB buffers, When using it first time,
-		 * No need to remove the buffer as the next field is present
-		 * in the same buffer. (so that job_ready won't fail)
-		 * It will be removed when using bottom field
+	if (ctx->deinterlacing && s_q_data->flags & Q_IS_SEQ_XX &&
+	    ctx->sequence % 2 == 0) {
+		/* When using SEQ_XX type buffers, each buffer has two fields
+		 * each buffer has two fields (top & bottom)
+		 * Removing one buffer is actually getting two fields
+		 * Alternate between two operations:-
+		 * Even : consume one field but DO NOT REMOVE from queue
+		 * Odd : consume other field and REMOVE from queue
 		 */
 		ctx->src_vbs[0] = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
 		WARN_ON(ctx->src_vbs[0] == NULL);
@@ -1573,8 +1587,10 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 		return -EINVAL;
 	}
 
-	if (pix->field != V4L2_FIELD_NONE && pix->field != V4L2_FIELD_ALTERNATE
-			&& pix->field != V4L2_FIELD_SEQ_TB)
+	if (pix->field != V4L2_FIELD_NONE &&
+	    pix->field != V4L2_FIELD_ALTERNATE &&
+	    pix->field != V4L2_FIELD_SEQ_TB &&
+	    pix->field != V4L2_FIELD_SEQ_BT)
 		pix->field = V4L2_FIELD_NONE;
 
 	depth = fmt->vpdma_fmt[VPE_LUMA]->depth;
@@ -1626,9 +1642,9 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 
 	/*
 	 * For the actual image parameters, we need to consider the field
-	 * height of the image for SEQ_TB buffers.
+	 * height of the image for SEQ_XX buffers.
 	 */
-	if (pix->field == V4L2_FIELD_SEQ_TB)
+	if (pix->field == V4L2_FIELD_SEQ_TB || pix->field == V4L2_FIELD_SEQ_BT)
 		height = pix->height / 2;
 	else
 		height = pix->height;
@@ -1734,11 +1750,13 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
 		q_data->flags |= Q_DATA_INTERLACED_ALTERNATE;
 	else if (q_data->field == V4L2_FIELD_SEQ_TB)
 		q_data->flags |= Q_DATA_INTERLACED_SEQ_TB;
+	else if (q_data->field == V4L2_FIELD_SEQ_BT)
+		q_data->flags |= Q_DATA_INTERLACED_SEQ_BT;
 	else
 		q_data->flags &= ~Q_IS_INTERLACED;
 
-	/* the crop height is halved for the case of SEQ_TB buffers */
-	if (q_data->flags & Q_DATA_INTERLACED_SEQ_TB)
+	/* the crop height is halved for the case of SEQ_XX buffers */
+	if (q_data->flags & Q_IS_SEQ_XX)
 		q_data->c_rect.height /= 2;
 
 	vpe_dbg(ctx->dev, "Setting format for type %d, wxh: %dx%d, fmt: %d bpl_y %d",
@@ -1811,10 +1829,10 @@ static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
 	}
 
 	/*
-	 * For SEQ_TB buffers, crop height should be less than the height of
+	 * For SEQ_XX buffers, crop height should be less than the height of
 	 * the field height, not the buffer height
 	 */
-	if (q_data->flags & Q_DATA_INTERLACED_SEQ_TB)
+	if (q_data->flags & Q_IS_SEQ_XX)
 		height = q_data->height / 2;
 	else
 		height = q_data->height;
@@ -2031,7 +2049,8 @@ static int vpe_buf_prepare(struct vb2_buffer *vb)
 		} else {
 			if (vbuf->field != V4L2_FIELD_TOP &&
 			    vbuf->field != V4L2_FIELD_BOTTOM &&
-			    vbuf->field != V4L2_FIELD_SEQ_TB)
+			    vbuf->field != V4L2_FIELD_SEQ_TB &&
+			    vbuf->field != V4L2_FIELD_SEQ_BT)
 				return -EINVAL;
 		}
 	}
-- 
2.17.1

[Patch v2 06/21] media: ti-vpe: Add support for NV21 format

[Benoit Parrot]

From: Nikhil Devshatwar <nikhil.nd@ti.com>

In NV21 format, the chroma plane is written to memory such that the U
and V components are swapped for NV12.

Create a new entry in the VPDMA formats to describe the correct data
types used in the data descriptors.

Update all checks for NV12 and add NV21 there as well.

Add support for V4L2_PIX_FMT_NV21 format for both capture and output
streams.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpdma.c      | 11 ++++++--
 drivers/media/platform/ti-vpe/vpdma.h      |  1 +
 drivers/media/platform/ti-vpe/vpdma_priv.h |  1 +
 drivers/media/platform/ti-vpe/vpe.c        | 29 +++++++++++++++++-----
 4 files changed, 34 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c
index 53d27cd6e10a..817d287c8138 100644
--- a/drivers/media/platform/ti-vpe/vpdma.c
+++ b/drivers/media/platform/ti-vpe/vpdma.c
@@ -56,6 +56,11 @@ const struct vpdma_data_format vpdma_yuv_fmts[] = {
 		.data_type	= DATA_TYPE_C420,
 		.depth		= 4,
 	},
+	[VPDMA_DATA_FMT_CB420] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_CB420,
+		.depth		= 4,
+	},
 	[VPDMA_DATA_FMT_YCR422] = {
 		.type		= VPDMA_DATA_FMT_TYPE_YUV,
 		.data_type	= DATA_TYPE_YCR422,
@@ -825,7 +830,8 @@ void vpdma_rawchan_add_out_dtd(struct vpdma_desc_list *list, int width,
 	channel = next_chan = raw_vpdma_chan;
 
 	if (fmt->type == VPDMA_DATA_FMT_TYPE_YUV &&
-			fmt->data_type == DATA_TYPE_C420) {
+	    (fmt->data_type == DATA_TYPE_C420 ||
+	     fmt->data_type == DATA_TYPE_CB420)) {
 		rect.height >>= 1;
 		rect.top >>= 1;
 		depth = 8;
@@ -893,7 +899,8 @@ void vpdma_add_in_dtd(struct vpdma_desc_list *list, int width,
 	channel = next_chan = chan_info[chan].num;
 
 	if (fmt->type == VPDMA_DATA_FMT_TYPE_YUV &&
-			fmt->data_type == DATA_TYPE_C420) {
+	    (fmt->data_type == DATA_TYPE_C420 ||
+	     fmt->data_type == DATA_TYPE_CB420)) {
 		rect.height >>= 1;
 		rect.top >>= 1;
 		depth = 8;
diff --git a/drivers/media/platform/ti-vpe/vpdma.h b/drivers/media/platform/ti-vpe/vpdma.h
index 28bc94129348..bce17329c4c9 100644
--- a/drivers/media/platform/ti-vpe/vpdma.h
+++ b/drivers/media/platform/ti-vpe/vpdma.h
@@ -71,6 +71,7 @@ enum vpdma_yuv_formats {
 	VPDMA_DATA_FMT_C444,
 	VPDMA_DATA_FMT_C422,
 	VPDMA_DATA_FMT_C420,
+	VPDMA_DATA_FMT_CB420,
 	VPDMA_DATA_FMT_YCR422,
 	VPDMA_DATA_FMT_YC444,
 	VPDMA_DATA_FMT_CRY422,
diff --git a/drivers/media/platform/ti-vpe/vpdma_priv.h b/drivers/media/platform/ti-vpe/vpdma_priv.h
index c488609bc162..d8ae3e1cd54d 100644
--- a/drivers/media/platform/ti-vpe/vpdma_priv.h
+++ b/drivers/media/platform/ti-vpe/vpdma_priv.h
@@ -92,6 +92,7 @@
 #define DATA_TYPE_C444				0x4
 #define DATA_TYPE_C422				0x5
 #define DATA_TYPE_C420				0x6
+#define DATA_TYPE_CB420				0x16
 #define DATA_TYPE_YC444				0x8
 #define DATA_TYPE_YCB422			0x7
 #define DATA_TYPE_YCR422			0x17
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 5d0ec5f7ca25..f3ee9ff87927 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -248,6 +248,14 @@ static struct vpe_fmt vpe_formats[] = {
 				    &vpdma_yuv_fmts[VPDMA_DATA_FMT_C420],
 				  },
 	},
+	{
+		.fourcc		= V4L2_PIX_FMT_NV21,
+		.types		= VPE_FMT_TYPE_CAPTURE | VPE_FMT_TYPE_OUTPUT,
+		.coplanar	= 1,
+		.vpdma_fmt	= { &vpdma_yuv_fmts[VPDMA_DATA_FMT_Y420],
+				    &vpdma_yuv_fmts[VPDMA_DATA_FMT_CB420],
+				  },
+	},
 	{
 		.fourcc		= V4L2_PIX_FMT_YUYV,
 		.types		= VPE_FMT_TYPE_CAPTURE | VPE_FMT_TYPE_OUTPUT,
@@ -686,7 +694,8 @@ static void set_cfg_modes(struct vpe_ctx *ctx)
 	 * Cfg Mode 1: YUV422 source, disable upsampler, DEI is de-interlacing.
 	 */
 
-	if (fmt->fourcc == V4L2_PIX_FMT_NV12)
+	if (fmt->fourcc == V4L2_PIX_FMT_NV12 ||
+	    fmt->fourcc == V4L2_PIX_FMT_NV21)
 		cfg_mode = 0;
 
 	write_field(us1_reg0, cfg_mode, VPE_US_MODE_MASK, VPE_US_MODE_SHIFT);
@@ -701,7 +710,8 @@ static void set_line_modes(struct vpe_ctx *ctx)
 	struct vpe_fmt *fmt = ctx->q_data[Q_DATA_SRC].fmt;
 	int line_mode = 1;
 
-	if (fmt->fourcc == V4L2_PIX_FMT_NV12)
+	if (fmt->fourcc == V4L2_PIX_FMT_NV12 ||
+	    fmt->fourcc == V4L2_PIX_FMT_NV21)
 		line_mode = 0;		/* double lines to line buffer */
 
 	/* regs for now */
@@ -763,7 +773,8 @@ static void set_dst_registers(struct vpe_ctx *ctx)
 	 */
 	val |= VPE_DS_SRC_DEI_SCALER | VPE_CSC_SRC_DEI_SCALER;
 
-	if (fmt->fourcc != V4L2_PIX_FMT_NV12)
+	if (fmt->fourcc != V4L2_PIX_FMT_NV12 &&
+	    fmt->fourcc != V4L2_PIX_FMT_NV21)
 		val |= VPE_DS_BYPASS;
 
 	mmr_adb->out_fmt_reg[0] = val;
@@ -1129,8 +1140,13 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 
 			if (field) {
 				int height = q_data->height / 2;
-				int bpp = fmt->fourcc == V4L2_PIX_FMT_NV12 ?
-						1 : (vpdma_fmt->depth >> 3);
+				int bpp;
+
+				if (fmt->fourcc == V4L2_PIX_FMT_NV12 ||
+				    fmt->fourcc == V4L2_PIX_FMT_NV21)
+					bpp = 1;
+				else
+					bpp = vpdma_fmt->depth >> 3;
 
 				if (plane)
 					height /= 2;
@@ -1148,7 +1164,8 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 	frame_width = q_data->c_rect.width;
 	frame_height = q_data->c_rect.height;
 
-	if (p_data->vb_part && fmt->fourcc == V4L2_PIX_FMT_NV12)
+	if (p_data->vb_part && (fmt->fourcc == V4L2_PIX_FMT_NV12 ||
+				fmt->fourcc == V4L2_PIX_FMT_NV21))
 		frame_height /= 2;
 
 	vpdma_add_in_dtd(&ctx->desc_list, q_data->width, stride,
-- 
2.17.1

[Patch v2 06/21] media: ti-vpe: Add support for NV21 format

[Benoit Parrot]

From: Nikhil Devshatwar <nikhil.nd@ti.com>

In NV21 format, the chroma plane is written to memory such that the U
and V components are swapped for NV12.

Create a new entry in the VPDMA formats to describe the correct data
types used in the data descriptors.

Update all checks for NV12 and add NV21 there as well.

Add support for V4L2_PIX_FMT_NV21 format for both capture and output
streams.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpdma.c      | 11 ++++++--
 drivers/media/platform/ti-vpe/vpdma.h      |  1 +
 drivers/media/platform/ti-vpe/vpdma_priv.h |  1 +
 drivers/media/platform/ti-vpe/vpe.c        | 29 +++++++++++++++++-----
 4 files changed, 34 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c
index 53d27cd6e10a..817d287c8138 100644
--- a/drivers/media/platform/ti-vpe/vpdma.c
+++ b/drivers/media/platform/ti-vpe/vpdma.c
@@ -56,6 +56,11 @@ const struct vpdma_data_format vpdma_yuv_fmts[] = {
 		.data_type	= DATA_TYPE_C420,
 		.depth		= 4,
 	},
+	[VPDMA_DATA_FMT_CB420] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_CB420,
+		.depth		= 4,
+	},
 	[VPDMA_DATA_FMT_YCR422] = {
 		.type		= VPDMA_DATA_FMT_TYPE_YUV,
 		.data_type	= DATA_TYPE_YCR422,
@@ -825,7 +830,8 @@ void vpdma_rawchan_add_out_dtd(struct vpdma_desc_list *list, int width,
 	channel = next_chan = raw_vpdma_chan;
 
 	if (fmt->type == VPDMA_DATA_FMT_TYPE_YUV &&
-			fmt->data_type == DATA_TYPE_C420) {
+	    (fmt->data_type == DATA_TYPE_C420 ||
+	     fmt->data_type == DATA_TYPE_CB420)) {
 		rect.height >>= 1;
 		rect.top >>= 1;
 		depth = 8;
@@ -893,7 +899,8 @@ void vpdma_add_in_dtd(struct vpdma_desc_list *list, int width,
 	channel = next_chan = chan_info[chan].num;
 
 	if (fmt->type == VPDMA_DATA_FMT_TYPE_YUV &&
-			fmt->data_type == DATA_TYPE_C420) {
+	    (fmt->data_type == DATA_TYPE_C420 ||
+	     fmt->data_type == DATA_TYPE_CB420)) {
 		rect.height >>= 1;
 		rect.top >>= 1;
 		depth = 8;
diff --git a/drivers/media/platform/ti-vpe/vpdma.h b/drivers/media/platform/ti-vpe/vpdma.h
index 28bc94129348..bce17329c4c9 100644
--- a/drivers/media/platform/ti-vpe/vpdma.h
+++ b/drivers/media/platform/ti-vpe/vpdma.h
@@ -71,6 +71,7 @@ enum vpdma_yuv_formats {
 	VPDMA_DATA_FMT_C444,
 	VPDMA_DATA_FMT_C422,
 	VPDMA_DATA_FMT_C420,
+	VPDMA_DATA_FMT_CB420,
 	VPDMA_DATA_FMT_YCR422,
 	VPDMA_DATA_FMT_YC444,
 	VPDMA_DATA_FMT_CRY422,
diff --git a/drivers/media/platform/ti-vpe/vpdma_priv.h b/drivers/media/platform/ti-vpe/vpdma_priv.h
index c488609bc162..d8ae3e1cd54d 100644
--- a/drivers/media/platform/ti-vpe/vpdma_priv.h
+++ b/drivers/media/platform/ti-vpe/vpdma_priv.h
@@ -92,6 +92,7 @@
 #define DATA_TYPE_C444				0x4
 #define DATA_TYPE_C422				0x5
 #define DATA_TYPE_C420				0x6
+#define DATA_TYPE_CB420				0x16
 #define DATA_TYPE_YC444				0x8
 #define DATA_TYPE_YCB422			0x7
 #define DATA_TYPE_YCR422			0x17
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 5d0ec5f7ca25..f3ee9ff87927 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -248,6 +248,14 @@ static struct vpe_fmt vpe_formats[] = {
 				    &vpdma_yuv_fmts[VPDMA_DATA_FMT_C420],
 				  },
 	},
+	{
+		.fourcc		= V4L2_PIX_FMT_NV21,
+		.types		= VPE_FMT_TYPE_CAPTURE | VPE_FMT_TYPE_OUTPUT,
+		.coplanar	= 1,
+		.vpdma_fmt	= { &vpdma_yuv_fmts[VPDMA_DATA_FMT_Y420],
+				    &vpdma_yuv_fmts[VPDMA_DATA_FMT_CB420],
+				  },
+	},
 	{
 		.fourcc		= V4L2_PIX_FMT_YUYV,
 		.types		= VPE_FMT_TYPE_CAPTURE | VPE_FMT_TYPE_OUTPUT,
@@ -686,7 +694,8 @@ static void set_cfg_modes(struct vpe_ctx *ctx)
 	 * Cfg Mode 1: YUV422 source, disable upsampler, DEI is de-interlacing.
 	 */
 
-	if (fmt->fourcc == V4L2_PIX_FMT_NV12)
+	if (fmt->fourcc == V4L2_PIX_FMT_NV12 ||
+	    fmt->fourcc == V4L2_PIX_FMT_NV21)
 		cfg_mode = 0;
 
 	write_field(us1_reg0, cfg_mode, VPE_US_MODE_MASK, VPE_US_MODE_SHIFT);
@@ -701,7 +710,8 @@ static void set_line_modes(struct vpe_ctx *ctx)
 	struct vpe_fmt *fmt = ctx->q_data[Q_DATA_SRC].fmt;
 	int line_mode = 1;
 
-	if (fmt->fourcc == V4L2_PIX_FMT_NV12)
+	if (fmt->fourcc == V4L2_PIX_FMT_NV12 ||
+	    fmt->fourcc == V4L2_PIX_FMT_NV21)
 		line_mode = 0;		/* double lines to line buffer */
 
 	/* regs for now */
@@ -763,7 +773,8 @@ static void set_dst_registers(struct vpe_ctx *ctx)
 	 */
 	val |= VPE_DS_SRC_DEI_SCALER | VPE_CSC_SRC_DEI_SCALER;
 
-	if (fmt->fourcc != V4L2_PIX_FMT_NV12)
+	if (fmt->fourcc != V4L2_PIX_FMT_NV12 &&
+	    fmt->fourcc != V4L2_PIX_FMT_NV21)
 		val |= VPE_DS_BYPASS;
 
 	mmr_adb->out_fmt_reg[0] = val;
@@ -1129,8 +1140,13 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 
 			if (field) {
 				int height = q_data->height / 2;
-				int bpp = fmt->fourcc == V4L2_PIX_FMT_NV12 ?
-						1 : (vpdma_fmt->depth >> 3);
+				int bpp;
+
+				if (fmt->fourcc == V4L2_PIX_FMT_NV12 ||
+				    fmt->fourcc == V4L2_PIX_FMT_NV21)
+					bpp = 1;
+				else
+					bpp = vpdma_fmt->depth >> 3;
 
 				if (plane)
 					height /= 2;
@@ -1148,7 +1164,8 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 	frame_width = q_data->c_rect.width;
 	frame_height = q_data->c_rect.height;
 
-	if (p_data->vb_part && fmt->fourcc == V4L2_PIX_FMT_NV12)
+	if (p_data->vb_part && (fmt->fourcc == V4L2_PIX_FMT_NV12 ||
+				fmt->fourcc == V4L2_PIX_FMT_NV21))
 		frame_height /= 2;
 
 	vpdma_add_in_dtd(&ctx->desc_list, q_data->width, stride,
-- 
2.17.1

[Patch v2 07/21] media: ti-vpe: Set MAX height supported to 2048 pixels

[Benoit Parrot]

From: Ram Prasad <x0038811@ti.com>

VPE's max height supported MAX_H is set to 1184 which is the
padded height from VC1 decoder output.

In case of 90, 270 degree rotated video processing, input to
VPE will be 1080x1920, 720x1280 etc and MAX_H needs to be set
correct value. Setting MAX_H to 2048 as worst case height.

Signed-off-by: Ram Prasad <x0038811@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index f3ee9ff87927..bbbf11174e16 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -52,7 +52,7 @@
 #define MIN_W		32
 #define MIN_H		32
 #define MAX_W		2048
-#define MAX_H		1184
+#define MAX_H		2048
 
 /* required alignments */
 #define S_ALIGN		0	/* multiple of 1 */
-- 
2.17.1

[Patch v2 07/21] media: ti-vpe: Set MAX height supported to 2048 pixels

[Benoit Parrot]

From: Ram Prasad <x0038811@ti.com>

VPE's max height supported MAX_H is set to 1184 which is the
padded height from VC1 decoder output.

In case of 90, 270 degree rotated video processing, input to
VPE will be 1080x1920, 720x1280 etc and MAX_H needs to be set
correct value. Setting MAX_H to 2048 as worst case height.

Signed-off-by: Ram Prasad <x0038811@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index f3ee9ff87927..bbbf11174e16 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -52,7 +52,7 @@
 #define MIN_W		32
 #define MIN_H		32
 #define MAX_W		2048
-#define MAX_H		1184
+#define MAX_H		2048
 
 /* required alignments */
 #define S_ALIGN		0	/* multiple of 1 */
-- 
2.17.1

[Patch v2 08/21] media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panic

[Benoit Parrot]

v4l2-compliance fails with this message:

   warn: v4l2-test-formats.cpp(717): \
   	TRY_FMT cannot handle an invalid pixelformat.
   test VIDIOC_TRY_FMT: FAIL

This causes the following kernel panic:

Unable to handle kernel paging request at virtual address 56595561
pgd = ecd80e00
*pgd=00000000
Internal error: Oops: 205 [#1] PREEMPT SMP ARM
...
CPU: 0 PID: 930 Comm: v4l2-compliance Not tainted \
	4.14.62-01715-gc8cd67f49a19 #1
Hardware name: Generic DRA72X (Flattened Device Tree)
task: ece44d80 task.stack: ecc6e000
PC is at __vpe_try_fmt+0x18c/0x2a8 [ti_vpe]
LR is at 0x8

Because the driver fails to properly check the 'num_planes' values for
proper ranges it ends up accessing out of bound data causing the kernel
panic.

Since this driver only handle single or dual plane pixel format, make
sure the provided value does not exceed 2 planes.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index bbbf11174e16..1278d457f753 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1650,7 +1650,7 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 			      &pix->height, MIN_H, MAX_H, H_ALIGN,
 			      S_ALIGN);
 
-	if (!pix->num_planes)
+	if (!pix->num_planes || pix->num_planes > 2)
 		pix->num_planes = fmt->coplanar ? 2 : 1;
 	else if (pix->num_planes > 1 && !fmt->coplanar)
 		pix->num_planes = 1;
-- 
2.17.1

[Patch v2 08/21] media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panic

[Benoit Parrot]

v4l2-compliance fails with this message:

   warn: v4l2-test-formats.cpp(717): \
   	TRY_FMT cannot handle an invalid pixelformat.
   test VIDIOC_TRY_FMT: FAIL

This causes the following kernel panic:

Unable to handle kernel paging request at virtual address 56595561
pgd = ecd80e00
*pgd=00000000
Internal error: Oops: 205 [#1] PREEMPT SMP ARM
...
CPU: 0 PID: 930 Comm: v4l2-compliance Not tainted \
	4.14.62-01715-gc8cd67f49a19 #1
Hardware name: Generic DRA72X (Flattened Device Tree)
task: ece44d80 task.stack: ecc6e000
PC is at __vpe_try_fmt+0x18c/0x2a8 [ti_vpe]
LR is at 0x8

Because the driver fails to properly check the 'num_planes' values for
proper ranges it ends up accessing out of bound data causing the kernel
panic.

Since this driver only handle single or dual plane pixel format, make
sure the provided value does not exceed 2 planes.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index bbbf11174e16..1278d457f753 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1650,7 +1650,7 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 			      &pix->height, MIN_H, MAX_H, H_ALIGN,
 			      S_ALIGN);
 
-	if (!pix->num_planes)
+	if (!pix->num_planes || pix->num_planes > 2)
 		pix->num_planes = fmt->coplanar ? 2 : 1;
 	else if (pix->num_planes > 1 && !fmt->coplanar)
 		pix->num_planes = 1;
-- 
2.17.1

[Patch v2 09/21] media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel format

[Benoit Parrot]

v4l2-compliance warns with this message:

   warn: v4l2-test-formats.cpp(717): \
 	TRY_FMT cannot handle an invalid pixelformat.
   warn: v4l2-test-formats.cpp(718): \
 	This may or may not be a problem. For more information see:
   warn: v4l2-test-formats.cpp(719): \
 	http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html
	...
   test VIDIOC_TRY_FMT: FAIL

We need to make sure that the returns a valid pixel format in all
instance. Based on the v4l2 framework convention drivers must return a
valid pixel format when the requested pixel format is either invalid or
not supported.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 1278d457f753..d3f1ae8b72fa 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -351,20 +351,25 @@ enum {
 };
 
 /* find our format description corresponding to the passed v4l2_format */
-static struct vpe_fmt *find_format(struct v4l2_format *f)
+static struct vpe_fmt *__find_format(u32 fourcc)
 {
 	struct vpe_fmt *fmt;
 	unsigned int k;
 
 	for (k = 0; k < ARRAY_SIZE(vpe_formats); k++) {
 		fmt = &vpe_formats[k];
-		if (fmt->fourcc == f->fmt.pix.pixelformat)
+		if (fmt->fourcc == fourcc)
 			return fmt;
 	}
 
 	return NULL;
 }
 
+static struct vpe_fmt *find_format(struct v4l2_format *f)
+{
+	return __find_format(f->fmt.pix.pixelformat);
+}
+
 /*
  * there is one vpe_dev structure in the driver, it is shared by
  * all instances.
@@ -1599,9 +1604,9 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 	unsigned int stride = 0;
 
 	if (!fmt || !(fmt->types & type)) {
-		vpe_err(ctx->dev, "Fourcc format (0x%08x) invalid.\n",
+		vpe_dbg(ctx->dev, "Fourcc format (0x%08x) invalid.\n",
 			pix->pixelformat);
-		return -EINVAL;
+		fmt = __find_format(V4L2_PIX_FMT_YUYV);
 	}
 
 	if (pix->field != V4L2_FIELD_NONE &&
-- 
2.17.1

[Patch v2 09/21] media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel format

[Benoit Parrot]

v4l2-compliance warns with this message:

   warn: v4l2-test-formats.cpp(717): \
 	TRY_FMT cannot handle an invalid pixelformat.
   warn: v4l2-test-formats.cpp(718): \
 	This may or may not be a problem. For more information see:
   warn: v4l2-test-formats.cpp(719): \
 	http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html
	...
   test VIDIOC_TRY_FMT: FAIL

We need to make sure that the returns a valid pixel format in all
instance. Based on the v4l2 framework convention drivers must return a
valid pixel format when the requested pixel format is either invalid or
not supported.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 1278d457f753..d3f1ae8b72fa 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -351,20 +351,25 @@ enum {
 };
 
 /* find our format description corresponding to the passed v4l2_format */
-static struct vpe_fmt *find_format(struct v4l2_format *f)
+static struct vpe_fmt *__find_format(u32 fourcc)
 {
 	struct vpe_fmt *fmt;
 	unsigned int k;
 
 	for (k = 0; k < ARRAY_SIZE(vpe_formats); k++) {
 		fmt = &vpe_formats[k];
-		if (fmt->fourcc == f->fmt.pix.pixelformat)
+		if (fmt->fourcc == fourcc)
 			return fmt;
 	}
 
 	return NULL;
 }
 
+static struct vpe_fmt *find_format(struct v4l2_format *f)
+{
+	return __find_format(f->fmt.pix.pixelformat);
+}
+
 /*
  * there is one vpe_dev structure in the driver, it is shared by
  * all instances.
@@ -1599,9 +1604,9 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 	unsigned int stride = 0;
 
 	if (!fmt || !(fmt->types & type)) {
-		vpe_err(ctx->dev, "Fourcc format (0x%08x) invalid.\n",
+		vpe_dbg(ctx->dev, "Fourcc format (0x%08x) invalid.\n",
 			pix->pixelformat);
-		return -EINVAL;
+		fmt = __find_format(V4L2_PIX_FMT_YUYV);
 	}
 
 	if (pix->field != V4L2_FIELD_NONE &&
-- 
2.17.1

[Patch v2 10/21] media: ti-vpe: vpe: Make sure YUYV is set as default format

[Benoit Parrot]

v4l2-compliance fails with this message:

   fail: v4l2-test-formats.cpp(672): \
	Video Capture Multiplanar: TRY_FMT(G_FMT) != G_FMT
   fail: v4l2-test-formats.cpp(672): \
	Video Output Multiplanar: TRY_FMT(G_FMT) != G_FMT
	...
   test VIDIOC_TRY_FMT: FAIL

Fixes: 94ed726e8e01 ("media: ti-vpe: Add support for NV21 format")

The default pixel format was setup as pointing to a specific offset in
the vpe_formats table assuming it was pointing to the V4L2_PIX_FMT_YUYV
entry. This became false after the addition on the NV21 format (see
above commid-id)

So instead of hard-coding an offset which might change over time we need
to use a lookup helper instead so we know the default will always be what
we intended.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index d3f1ae8b72fa..7aa83026fb6c 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -2321,7 +2321,7 @@ static int vpe_open(struct file *file)
 	v4l2_ctrl_handler_setup(hdl);
 
 	s_q_data = &ctx->q_data[Q_DATA_SRC];
-	s_q_data->fmt = &vpe_formats[2];
+	s_q_data->fmt = __find_format(V4L2_PIX_FMT_YUYV);
 	s_q_data->width = 1920;
 	s_q_data->height = 1080;
 	s_q_data->nplanes = 1;
-- 
2.17.1

[Patch v2 10/21] media: ti-vpe: vpe: Make sure YUYV is set as default format

[Benoit Parrot]

v4l2-compliance fails with this message:

   fail: v4l2-test-formats.cpp(672): \
	Video Capture Multiplanar: TRY_FMT(G_FMT) != G_FMT
   fail: v4l2-test-formats.cpp(672): \
	Video Output Multiplanar: TRY_FMT(G_FMT) != G_FMT
	...
   test VIDIOC_TRY_FMT: FAIL

Fixes: 94ed726e8e01 ("media: ti-vpe: Add support for NV21 format")

The default pixel format was setup as pointing to a specific offset in
the vpe_formats table assuming it was pointing to the V4L2_PIX_FMT_YUYV
entry. This became false after the addition on the NV21 format (see
above commid-id)

So instead of hard-coding an offset which might change over time we need
to use a lookup helper instead so we know the default will always be what
we intended.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index d3f1ae8b72fa..7aa83026fb6c 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -2321,7 +2321,7 @@ static int vpe_open(struct file *file)
 	v4l2_ctrl_handler_setup(hdl);
 
 	s_q_data = &ctx->q_data[Q_DATA_SRC];
-	s_q_data->fmt = &vpe_formats[2];
+	s_q_data->fmt = __find_format(V4L2_PIX_FMT_YUYV);
 	s_q_data->width = 1920;
 	s_q_data->height = 1080;
 	s_q_data->nplanes = 1;
-- 
2.17.1

[Patch v2 11/21] media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimage

[Benoit Parrot]

v4l2-compliance fails with this message:

   fail: v4l2-test-formats.cpp(463): !pfmt.sizeimage
   fail: v4l2-test-formats.cpp(736): \
	Video Capture Multiplanar is valid, \
	but TRY_FMT failed to return a format
   test VIDIOC_TRY_FMT: FAIL

This failure is causd by the driver failing to handle out range
'bytesperline' values from user space applications.

VPDMA hardware is limited to 64k line stride (16 bytes aligned, so 65520
bytes). So make sure the provided or calculated 'bytesperline' is
smaller than the maximum value.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpdma.h | 1 +
 drivers/media/platform/ti-vpe/vpe.c   | 4 ++++
 2 files changed, 5 insertions(+)

diff --git a/drivers/media/platform/ti-vpe/vpdma.h b/drivers/media/platform/ti-vpe/vpdma.h
index bce17329c4c9..393fcbb3cb40 100644
--- a/drivers/media/platform/ti-vpe/vpdma.h
+++ b/drivers/media/platform/ti-vpe/vpdma.h
@@ -57,6 +57,7 @@ struct vpdma_data_format {
 						 * line stride of source and dest
 						 * buffers should be 16 byte aligned
 						 */
+#define VPDMA_MAX_STRIDE		65520	/* Max line stride 16 byte aligned */
 #define VPDMA_DTD_DESC_SIZE		32	/* 8 words */
 #define VPDMA_CFD_CTD_DESC_SIZE		16	/* 4 words */
 
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 7aa83026fb6c..0a7cf9c820c6 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1694,6 +1694,10 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 		if (stride > plane_fmt->bytesperline)
 			plane_fmt->bytesperline = stride;
 
+		plane_fmt->bytesperline = clamp_t(u32, plane_fmt->bytesperline,
+						  stride,
+						  VPDMA_MAX_STRIDE);
+
 		plane_fmt->bytesperline = ALIGN(plane_fmt->bytesperline,
 						VPDMA_STRIDE_ALIGN);
 
-- 
2.17.1

[Patch v2 11/21] media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimage

[Benoit Parrot]

v4l2-compliance fails with this message:

   fail: v4l2-test-formats.cpp(463): !pfmt.sizeimage
   fail: v4l2-test-formats.cpp(736): \
	Video Capture Multiplanar is valid, \
	but TRY_FMT failed to return a format
   test VIDIOC_TRY_FMT: FAIL

This failure is causd by the driver failing to handle out range
'bytesperline' values from user space applications.

VPDMA hardware is limited to 64k line stride (16 bytes aligned, so 65520
bytes). So make sure the provided or calculated 'bytesperline' is
smaller than the maximum value.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpdma.h | 1 +
 drivers/media/platform/ti-vpe/vpe.c   | 4 ++++
 2 files changed, 5 insertions(+)

diff --git a/drivers/media/platform/ti-vpe/vpdma.h b/drivers/media/platform/ti-vpe/vpdma.h
index bce17329c4c9..393fcbb3cb40 100644
--- a/drivers/media/platform/ti-vpe/vpdma.h
+++ b/drivers/media/platform/ti-vpe/vpdma.h
@@ -57,6 +57,7 @@ struct vpdma_data_format {
 						 * line stride of source and dest
 						 * buffers should be 16 byte aligned
 						 */
+#define VPDMA_MAX_STRIDE		65520	/* Max line stride 16 byte aligned */
 #define VPDMA_DTD_DESC_SIZE		32	/* 8 words */
 #define VPDMA_CFD_CTD_DESC_SIZE		16	/* 4 words */
 
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 7aa83026fb6c..0a7cf9c820c6 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1694,6 +1694,10 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 		if (stride > plane_fmt->bytesperline)
 			plane_fmt->bytesperline = stride;
 
+		plane_fmt->bytesperline = clamp_t(u32, plane_fmt->bytesperline,
+						  stride,
+						  VPDMA_MAX_STRIDE);
+
 		plane_fmt->bytesperline = ALIGN(plane_fmt->bytesperline,
 						VPDMA_STRIDE_ALIGN);
 
-- 
2.17.1

[Patch v2 12/21] media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence number

[Benoit Parrot]

v4l2-compliance fails with this message:

   fail: v4l2-test-buffers.cpp(294): \
	(int)g_sequence() < seq.last_seq + 1
   fail: v4l2-test-buffers.cpp(740): \
	buf.check(m2m_q, last_m2m_seq)
   fail: v4l2-test-buffers.cpp(974): \
	captureBufs(node, q, m2m_q, frame_count, true)
   test MMAP: FAIL

The driver is failing to update the source frame sequence number in the
vb2 buffer object. Only the destination frame sequence was being
updated.

This is only a reporting issue if the user space app actually cares
about the frame sequence number. But it is fixed nonetheless.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 0a7cf9c820c6..8ab1c3241b74 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1440,6 +1440,7 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
 		d_vb->timecode = s_vb->timecode;
 
 	d_vb->sequence = ctx->sequence;
+	s_vb->sequence = ctx->sequence;
 
 	d_q_data = &ctx->q_data[Q_DATA_DST];
 	if (d_q_data->flags & Q_IS_INTERLACED) {
-- 
2.17.1

[Patch v2 12/21] media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence number

[Benoit Parrot]

v4l2-compliance fails with this message:

   fail: v4l2-test-buffers.cpp(294): \
	(int)g_sequence() < seq.last_seq + 1
   fail: v4l2-test-buffers.cpp(740): \
	buf.check(m2m_q, last_m2m_seq)
   fail: v4l2-test-buffers.cpp(974): \
	captureBufs(node, q, m2m_q, frame_count, true)
   test MMAP: FAIL

The driver is failing to update the source frame sequence number in the
vb2 buffer object. Only the destination frame sequence was being
updated.

This is only a reporting issue if the user space app actually cares
about the frame sequence number. But it is fixed nonetheless.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 0a7cf9c820c6..8ab1c3241b74 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1440,6 +1440,7 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
 		d_vb->timecode = s_vb->timecode;
 
 	d_vb->sequence = ctx->sequence;
+	s_vb->sequence = ctx->sequence;
 
 	d_q_data = &ctx->q_data[Q_DATA_DST];
 	if (d_q_data->flags & Q_IS_INTERLACED) {
-- 
2.17.1

[Patch v2 13/21] media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort cases

[Benoit Parrot]

v4l2-compliance fails with this message:

   fail: v4l2-test-buffers.cpp(691): ret == 0
   fail: v4l2-test-buffers.cpp(974): captureBufs(node, q, m2m_q,
frame_count, true)
   test MMAP: FAIL

This caused the following Kernel Warning:

WARNING: CPU: 0 PID: 961 at
drivers/media/v4l2-core/videobuf2-core.c:1658
__vb2_queue_cancel+0x174/0x1d8
...
CPU: 0 PID: 961 Comm: v4l2-compliance Not tainted
4.14.62-01720-g20ecd717e87a #6
Hardware name: Generic DRA72X (Flattened Device Tree)
Backtrace:
[<c020b5bc>] (dump_backtrace) from [<c020b8a0>] (show_stack+0x18/0x1c)
 r7:00000009 r6:60070013 r5:00000000 r4:c1053824
[<c020b888>] (show_stack) from [<c09232e8>] (dump_stack+0x90/0xa4)
[<c0923258>] (dump_stack) from [<c022b740>] (__warn+0xec/0x104)
  r7:00000009 r6:c0c0ad50 r5:00000000 r4:00000000
[<c022b654>] (__warn) from [<c022b810>] (warn_slowpath_null+0x28/0x30)
  r9:00000008 r8:00000000 r7:eced4808 r6:edbc9bac r5:eced4844
r4:eced4808
[<c022b7e8>] (warn_slowpath_null) from [<c0726f48>]
(__vb2_queue_cancel+0x174/0x1d8)
[<c0726dd4>] (__vb2_queue_cancel) from [<c0727648>]
(vb2_core_queue_release+0x20/0x40)
  r10:ecc7bd70 r9:00000008 r8:00000000 r7:edb73010 r6:edbc9bac
r5:eced4844
  r4:eced4808 r3:00000004
[<c0727628>] (vb2_core_queue_release) from [<c0729528>]
(vb2_queue_release+0x10/0x14)
  r5:edbc9810 r4:eced4800
[<c0729518>] (vb2_queue_release) from [<c0724d08>]
(v4l2_m2m_ctx_release+0x1c/0x30)
[<c0724cec>] (v4l2_m2m_ctx_release) from [<bf0e8f28>]
(vpe_release+0x74/0xb0 [ti_vpe])
  r5:edbc9810 r4:ed67a400
[<bf0e8eb4>] (vpe_release [ti_vpe]) from [<c070fccc>]
(v4l2_release+0x3c/0x80)
  r7:edb73010 r6:ed176aa0 r5:edbc9868 r4:ed5119c0
[<c070fc90>] (v4l2_release) from [<c033cf1c>] (__fput+0x8c/0x1dc)
  r5:ecc7bd70 r4:ed5119c0
[<c033ce90>] (__fput) from [<c033d0cc>] (____fput+0x10/0x14)
  r10:00000000 r9:ed5119c0 r8:ece392d0 r7:c1059544 r6:ece38d80
r5:ece392b4
  r4:00000000
[<c033d0bc>] (____fput) from [<c0246e00>] (task_work_run+0x98/0xb8)
[<c0246d68>] (task_work_run) from [<c022f1d8>] (do_exit+0x170/0xa80)
  r9:ece351fc r8:00000000 r7:ecde3f58 r6:ffffe000 r5:ece351c0
r4:ece38d80
[<c022f068>] (do_exit) from [<c022fb6c>] (do_group_exit+0x48/0xc4)
  r7:000000f8
[<c022fb24>] (do_group_exit) from [<c022fc00>]
(__wake_up_parent+0x0/0x28)
  r7:000000f8 r6:b6c6a798 r5:00000001 r4:00000001
[<c022fbe8>] (SyS_exit_group) from [<c0207c80>]
(ret_fast_syscall+0x0/0x4c)

These warnings are caused by buffers which not properly cleaned
up/release during an abort use case.

In the abort cases the VPDMA desc buffers would still be mapped and the
in-flight VB2 buffers would not be released properly causing a kernel
warning from being generated by the videobuf2-core level.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 8ab1c3241b74..ad9d8b559cad 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1427,9 +1427,6 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
 	 /* the previous dst mv buffer becomes the next src mv buffer */
 	ctx->src_mv_buf_selector = !ctx->src_mv_buf_selector;
 
-	if (ctx->aborting)
-		goto finished;
-
 	s_vb = ctx->src_vbs[0];
 	d_vb = ctx->dst_vb;
 
@@ -1494,6 +1491,9 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
 	ctx->src_vbs[0] = NULL;
 	ctx->dst_vb = NULL;
 
+	if (ctx->aborting)
+		goto finished;
+
 	ctx->bufs_completed++;
 	if (ctx->bufs_completed < ctx->bufs_per_job && job_ready(ctx)) {
 		device_run(ctx);
@@ -2404,6 +2404,12 @@ static int vpe_release(struct file *file)
 
 	mutex_lock(&dev->dev_mutex);
 	free_mv_buffers(ctx);
+
+	vpdma_unmap_desc_buf(dev->vpdma, &ctx->desc_list.buf);
+	vpdma_unmap_desc_buf(dev->vpdma, &ctx->mmr_adb);
+	vpdma_unmap_desc_buf(dev->vpdma, &ctx->sc_coeff_h);
+	vpdma_unmap_desc_buf(dev->vpdma, &ctx->sc_coeff_v);
+
 	vpdma_free_desc_list(&ctx->desc_list);
 	vpdma_free_desc_buf(&ctx->mmr_adb);
 
-- 
2.17.1

[Patch v2 13/21] media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort cases

[Benoit Parrot]

v4l2-compliance fails with this message:

   fail: v4l2-test-buffers.cpp(691): ret == 0
   fail: v4l2-test-buffers.cpp(974): captureBufs(node, q, m2m_q,
frame_count, true)
   test MMAP: FAIL

This caused the following Kernel Warning:

WARNING: CPU: 0 PID: 961 at
drivers/media/v4l2-core/videobuf2-core.c:1658
__vb2_queue_cancel+0x174/0x1d8
...
CPU: 0 PID: 961 Comm: v4l2-compliance Not tainted
4.14.62-01720-g20ecd717e87a #6
Hardware name: Generic DRA72X (Flattened Device Tree)
Backtrace:
[<c020b5bc>] (dump_backtrace) from [<c020b8a0>] (show_stack+0x18/0x1c)
 r7:00000009 r6:60070013 r5:00000000 r4:c1053824
[<c020b888>] (show_stack) from [<c09232e8>] (dump_stack+0x90/0xa4)
[<c0923258>] (dump_stack) from [<c022b740>] (__warn+0xec/0x104)
  r7:00000009 r6:c0c0ad50 r5:00000000 r4:00000000
[<c022b654>] (__warn) from [<c022b810>] (warn_slowpath_null+0x28/0x30)
  r9:00000008 r8:00000000 r7:eced4808 r6:edbc9bac r5:eced4844
r4:eced4808
[<c022b7e8>] (warn_slowpath_null) from [<c0726f48>]
(__vb2_queue_cancel+0x174/0x1d8)
[<c0726dd4>] (__vb2_queue_cancel) from [<c0727648>]
(vb2_core_queue_release+0x20/0x40)
  r10:ecc7bd70 r9:00000008 r8:00000000 r7:edb73010 r6:edbc9bac
r5:eced4844
  r4:eced4808 r3:00000004
[<c0727628>] (vb2_core_queue_release) from [<c0729528>]
(vb2_queue_release+0x10/0x14)
  r5:edbc9810 r4:eced4800
[<c0729518>] (vb2_queue_release) from [<c0724d08>]
(v4l2_m2m_ctx_release+0x1c/0x30)
[<c0724cec>] (v4l2_m2m_ctx_release) from [<bf0e8f28>]
(vpe_release+0x74/0xb0 [ti_vpe])
  r5:edbc9810 r4:ed67a400
[<bf0e8eb4>] (vpe_release [ti_vpe]) from [<c070fccc>]
(v4l2_release+0x3c/0x80)
  r7:edb73010 r6:ed176aa0 r5:edbc9868 r4:ed5119c0
[<c070fc90>] (v4l2_release) from [<c033cf1c>] (__fput+0x8c/0x1dc)
  r5:ecc7bd70 r4:ed5119c0
[<c033ce90>] (__fput) from [<c033d0cc>] (____fput+0x10/0x14)
  r10:00000000 r9:ed5119c0 r8:ece392d0 r7:c1059544 r6:ece38d80
r5:ece392b4
  r4:00000000
[<c033d0bc>] (____fput) from [<c0246e00>] (task_work_run+0x98/0xb8)
[<c0246d68>] (task_work_run) from [<c022f1d8>] (do_exit+0x170/0xa80)
  r9:ece351fc r8:00000000 r7:ecde3f58 r6:ffffe000 r5:ece351c0
r4:ece38d80
[<c022f068>] (do_exit) from [<c022fb6c>] (do_group_exit+0x48/0xc4)
  r7:000000f8
[<c022fb24>] (do_group_exit) from [<c022fc00>]
(__wake_up_parent+0x0/0x28)
  r7:000000f8 r6:b6c6a798 r5:00000001 r4:00000001
[<c022fbe8>] (SyS_exit_group) from [<c0207c80>]
(ret_fast_syscall+0x0/0x4c)

These warnings are caused by buffers which not properly cleaned
up/release during an abort use case.

In the abort cases the VPDMA desc buffers would still be mapped and the
in-flight VB2 buffers would not be released properly causing a kernel
warning from being generated by the videobuf2-core level.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 8ab1c3241b74..ad9d8b559cad 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1427,9 +1427,6 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
 	 /* the previous dst mv buffer becomes the next src mv buffer */
 	ctx->src_mv_buf_selector = !ctx->src_mv_buf_selector;
 
-	if (ctx->aborting)
-		goto finished;
-
 	s_vb = ctx->src_vbs[0];
 	d_vb = ctx->dst_vb;
 
@@ -1494,6 +1491,9 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
 	ctx->src_vbs[0] = NULL;
 	ctx->dst_vb = NULL;
 
+	if (ctx->aborting)
+		goto finished;
+
 	ctx->bufs_completed++;
 	if (ctx->bufs_completed < ctx->bufs_per_job && job_ready(ctx)) {
 		device_run(ctx);
@@ -2404,6 +2404,12 @@ static int vpe_release(struct file *file)
 
 	mutex_lock(&dev->dev_mutex);
 	free_mv_buffers(ctx);
+
+	vpdma_unmap_desc_buf(dev->vpdma, &ctx->desc_list.buf);
+	vpdma_unmap_desc_buf(dev->vpdma, &ctx->mmr_adb);
+	vpdma_unmap_desc_buf(dev->vpdma, &ctx->sc_coeff_h);
+	vpdma_unmap_desc_buf(dev->vpdma, &ctx->sc_coeff_v);
+
 	vpdma_free_desc_list(&ctx->desc_list);
 	vpdma_free_desc_buf(&ctx->mmr_adb);
 
-- 
2.17.1

[Patch v2 14/21] media: ti-vpe: vpdma: Use fixed type for address in descriptor

[Benoit Parrot]

Using dma_addr_t as the type to hold address inside of a fix sized
descriptor used by the vpdma firmware is prone to fail when the expected
width is 32 bits and suddenly when CONFIG_LPAE is enabled the data size
is now 64 bits shifted the remaining members of the descriptor in memory
which confuses the firmware.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpdma_priv.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpdma_priv.h b/drivers/media/platform/ti-vpe/vpdma_priv.h
index d8ae3e1cd54d..0bbee45338bd 100644
--- a/drivers/media/platform/ti-vpe/vpdma_priv.h
+++ b/drivers/media/platform/ti-vpe/vpdma_priv.h
@@ -166,11 +166,11 @@ struct vpdma_dtd {
 		u32		xfer_length_height;
 		u32		w1;
 	};
-	dma_addr_t		start_addr;
+	u32			start_addr;
 	u32			pkt_ctl;
 	union {
 		u32		frame_width_height;	/* inbound */
-		dma_addr_t	desc_write_addr;	/* outbound */
+		u32		desc_write_addr;	/* outbound */
 	};
 	union {
 		u32		start_h_v;		/* inbound */
-- 
2.17.1

[Patch v2 14/21] media: ti-vpe: vpdma: Use fixed type for address in descriptor

[Benoit Parrot]

Using dma_addr_t as the type to hold address inside of a fix sized
descriptor used by the vpdma firmware is prone to fail when the expected
width is 32 bits and suddenly when CONFIG_LPAE is enabled the data size
is now 64 bits shifted the remaining members of the descriptor in memory
which confuses the firmware.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpdma_priv.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpdma_priv.h b/drivers/media/platform/ti-vpe/vpdma_priv.h
index d8ae3e1cd54d..0bbee45338bd 100644
--- a/drivers/media/platform/ti-vpe/vpdma_priv.h
+++ b/drivers/media/platform/ti-vpe/vpdma_priv.h
@@ -166,11 +166,11 @@ struct vpdma_dtd {
 		u32		xfer_length_height;
 		u32		w1;
 	};
-	dma_addr_t		start_addr;
+	u32			start_addr;
 	u32			pkt_ctl;
 	union {
 		u32		frame_width_height;	/* inbound */
-		dma_addr_t	desc_write_addr;	/* outbound */
+		u32		desc_write_addr;	/* outbound */
 	};
 	union {
 		u32		start_h_v;		/* inbound */
-- 
2.17.1

[Patch v2 15/21] media: ti-vpe: Set the DMA mask and coherent mask

[Benoit Parrot]

VPE uses VPDMA (built-in dma engine) to transfer data to and from the IP
and memory. VPDMA expect 32 bits addresses. To make sure that is always
the case set the DMA mask and coherent mask for the device.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index ad9d8b559cad..d7f8eb901475 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -2517,6 +2517,13 @@ static int vpe_probe(struct platform_device *pdev)
 	struct vpe_dev *dev;
 	int ret, irq, func;
 
+	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(&pdev->dev,
+			"32-bit consistent DMA enable failed\n");
+		return ret;
+	}
+
 	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
 	if (!dev)
 		return -ENOMEM;
-- 
2.17.1

[Patch v2 15/21] media: ti-vpe: Set the DMA mask and coherent mask

[Benoit Parrot]

VPE uses VPDMA (built-in dma engine) to transfer data to and from the IP
and memory. VPDMA expect 32 bits addresses. To make sure that is always
the case set the DMA mask and coherent mask for the device.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index ad9d8b559cad..d7f8eb901475 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -2517,6 +2517,13 @@ static int vpe_probe(struct platform_device *pdev)
 	struct vpe_dev *dev;
 	int ret, irq, func;
 
+	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(&pdev->dev,
+			"32-bit consistent DMA enable failed\n");
+		return ret;
+	}
+
 	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
 	if (!dev)
 		return -ENOMEM;
-- 
2.17.1

[Patch v2 16/21] media: ti-vpe: vpe: use standard struct instead of duplicating fields

[Benoit Parrot]

For each queue we need to maintain resolutions, pixel format,
bytesperline, sizeimage, colorspace, etc.

Instead of manually adding more entries in the vpe_q_data struct, it is
better to just add a "struct v4l2_format" member and use that to store
all needed information.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 185 ++++++++++++++--------------
 1 file changed, 91 insertions(+), 94 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index d7f8eb901475..5b1e9908fff2 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -319,14 +319,9 @@ static struct vpe_fmt vpe_formats[] = {
  * there is one source queue and one destination queue for each m2m context.
  */
 struct vpe_q_data {
-	unsigned int		width;				/* frame width */
-	unsigned int		height;				/* frame height */
-	unsigned int		nplanes;			/* Current number of planes */
-	unsigned int		bytesperline[VPE_MAX_PLANES];	/* bytes per line in memory */
-	enum v4l2_colorspace	colorspace;
-	enum v4l2_field		field;				/* supported field value */
+	/* current v4l2 format info */
+	struct v4l2_format	format;
 	unsigned int		flags;
-	unsigned int		sizeimage[VPE_MAX_PLANES];	/* image size in memory */
 	struct v4l2_rect	c_rect;				/* crop/compose rectangle */
 	struct vpe_fmt		*fmt;				/* format info */
 };
@@ -761,7 +756,8 @@ static void set_src_registers(struct vpe_ctx *ctx)
 static void set_dst_registers(struct vpe_ctx *ctx)
 {
 	struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
-	enum v4l2_colorspace clrspc = ctx->q_data[Q_DATA_DST].colorspace;
+	enum v4l2_colorspace clrspc =
+			ctx->q_data[Q_DATA_DST].format.fmt.pix_mp.colorspace;
 	struct vpe_fmt *fmt = ctx->q_data[Q_DATA_DST].fmt;
 	u32 val = 0;
 
@@ -868,11 +864,15 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
 	unsigned int src_h = s_q_data->c_rect.height;
 	unsigned int dst_w = d_q_data->c_rect.width;
 	unsigned int dst_h = d_q_data->c_rect.height;
+	struct v4l2_pix_format_mplane *spix;
+	struct v4l2_pix_format_mplane *dpix;
 	size_t mv_buf_size;
 	int ret;
 
 	ctx->sequence = 0;
 	ctx->field = V4L2_FIELD_TOP;
+	spix = &s_q_data->format.fmt.pix_mp;
+	dpix = &d_q_data->format.fmt.pix_mp;
 
 	if ((s_q_data->flags & Q_IS_INTERLACED) &&
 			!(d_q_data->flags & Q_IS_INTERLACED)) {
@@ -887,9 +887,9 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
 		 * extra space will not be used by the de-interlacer, but will
 		 * ensure that vpdma operates correctly
 		 */
-		bytes_per_line = ALIGN((s_q_data->width * mv->depth) >> 3,
-					VPDMA_STRIDE_ALIGN);
-		mv_buf_size = bytes_per_line * s_q_data->height;
+		bytes_per_line = ALIGN((spix->width * mv->depth) >> 3,
+				       VPDMA_STRIDE_ALIGN);
+		mv_buf_size = bytes_per_line * spix->height;
 
 		ctx->deinterlacing = true;
 		src_h <<= 1;
@@ -909,7 +909,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
 	set_dei_regs(ctx);
 
 	csc_set_coeff(ctx->dev->csc, &mmr_adb->csc_regs[0],
-		s_q_data->colorspace, d_q_data->colorspace);
+		      spix->colorspace, dpix->colorspace);
 
 	sc_set_hs_coeffs(ctx->dev->sc, ctx->sc_coeff_h.addr, src_w, dst_w);
 	sc_set_vs_coeffs(ctx->dev->sc, ctx->sc_coeff_v.addr, src_h, dst_h);
@@ -1023,6 +1023,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 	struct vpe_fmt *fmt = q_data->fmt;
 	const struct vpdma_data_format *vpdma_fmt;
 	int mv_buf_selector = !ctx->src_mv_buf_selector;
+	struct v4l2_pix_format_mplane *pix;
 	dma_addr_t dma_addr;
 	u32 flags = 0;
 	u32 offset = 0;
@@ -1032,21 +1033,23 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 		vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
 		dma_addr = ctx->mv_buf_dma[mv_buf_selector];
 		q_data = &ctx->q_data[Q_DATA_SRC];
-		stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
+		pix = &q_data->format.fmt.pix_mp;
+		stride = ALIGN((pix->width * vpdma_fmt->depth) >> 3,
 			       VPDMA_STRIDE_ALIGN);
 	} else {
 		/* to incorporate interleaved formats */
 		int plane = fmt->coplanar ? p_data->vb_part : 0;
 
+		pix = &q_data->format.fmt.pix_mp;
 		vpdma_fmt = fmt->vpdma_fmt[plane];
 		/*
 		 * If we are using a single plane buffer and
 		 * we need to set a separate vpdma chroma channel.
 		 */
-		if (q_data->nplanes == 1 && plane) {
+		if (pix->num_planes == 1 && plane) {
 			dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
 			/* Compute required offset */
-			offset = q_data->bytesperline[0] * q_data->height;
+			offset = pix->plane_fmt[0].bytesperline * pix->height;
 		} else {
 			dma_addr = vb2_dma_contig_plane_dma_addr(vb, plane);
 			/* Use address as is, no offset */
@@ -1060,7 +1063,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 		}
 		/* Apply the offset */
 		dma_addr += offset;
-		stride = q_data->bytesperline[VPE_LUMA];
+		stride = pix->plane_fmt[VPE_LUMA].bytesperline;
 	}
 
 	if (q_data->flags & Q_DATA_FRAME_1D)
@@ -1071,7 +1074,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 	vpdma_set_max_size(ctx->dev->vpdma, VPDMA_MAX_SIZE1,
 			   MAX_W, MAX_H);
 
-	vpdma_add_out_dtd(&ctx->desc_list, q_data->width,
+	vpdma_add_out_dtd(&ctx->desc_list, pix->width,
 			  stride, &q_data->c_rect,
 			  vpdma_fmt, dma_addr, MAX_OUT_WIDTH_REG1,
 			  MAX_OUT_HEIGHT_REG1, p_data->channel, flags);
@@ -1084,6 +1087,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 	struct vb2_buffer *vb = &ctx->src_vbs[p_data->vb_index]->vb2_buf;
 	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 	struct vpe_fmt *fmt = q_data->fmt;
+	struct v4l2_pix_format_mplane *pix;
 	const struct vpdma_data_format *vpdma_fmt;
 	int mv_buf_selector = ctx->src_mv_buf_selector;
 	int field = vbuf->field == V4L2_FIELD_BOTTOM;
@@ -1093,10 +1097,11 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 	u32 offset = 0;
 	u32 stride;
 
+	pix = &q_data->format.fmt.pix_mp;
 	if (port == VPE_PORT_MV_IN) {
 		vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
 		dma_addr = ctx->mv_buf_dma[mv_buf_selector];
-		stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
+		stride = ALIGN((pix->width * vpdma_fmt->depth) >> 3,
 			       VPDMA_STRIDE_ALIGN);
 	} else {
 		/* to incorporate interleaved formats */
@@ -1107,10 +1112,10 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 		 * If we are using a single plane buffer and
 		 * we need to set a separate vpdma chroma channel.
 		 */
-		if (q_data->nplanes == 1 && plane) {
+		if (pix->num_planes == 1 && plane) {
 			dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
 			/* Compute required offset */
-			offset = q_data->bytesperline[0] * q_data->height;
+			offset = pix->plane_fmt[0].bytesperline * pix->height;
 		} else {
 			dma_addr = vb2_dma_contig_plane_dma_addr(vb, plane);
 			/* Use address as is, no offset */
@@ -1124,7 +1129,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 		}
 		/* Apply the offset */
 		dma_addr += offset;
-		stride = q_data->bytesperline[VPE_LUMA];
+		stride = pix->plane_fmt[VPE_LUMA].bytesperline;
 
 		/*
 		 * field used in VPDMA desc  = 0 (top) / 1 (bottom)
@@ -1144,7 +1149,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 			field = (field + p_data->vb_index + ctx->sequence) % 2;
 
 			if (field) {
-				int height = q_data->height / 2;
+				int height = pix->height / 2;
 				int bpp;
 
 				if (fmt->fourcc == V4L2_PIX_FMT_NV12 ||
@@ -1156,7 +1161,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 				if (plane)
 					height /= 2;
 
-				dma_addr += q_data->width * height * bpp;
+				dma_addr += pix->width * height * bpp;
 			}
 		}
 	}
@@ -1173,7 +1178,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 				fmt->fourcc == V4L2_PIX_FMT_NV21))
 		frame_height /= 2;
 
-	vpdma_add_in_dtd(&ctx->desc_list, q_data->width, stride,
+	vpdma_add_in_dtd(&ctx->desc_list, pix->width, stride,
 			 &q_data->c_rect, vpdma_fmt, dma_addr,
 			 p_data->channel, field, flags, frame_width,
 			 frame_height, 0, 0);
@@ -1282,7 +1287,7 @@ static void device_run(void *priv)
 	if (ctx->deinterlacing)
 		add_out_dtd(ctx, VPE_PORT_MV_OUT);
 
-	if (d_q_data->colorspace == V4L2_COLORSPACE_SRGB) {
+	if (d_q_data->format.fmt.pix_mp.colorspace == V4L2_COLORSPACE_SRGB) {
 		add_out_dtd(ctx, VPE_PORT_RGB_OUT);
 	} else {
 		add_out_dtd(ctx, VPE_PORT_LUMA_OUT);
@@ -1324,7 +1329,7 @@ static void device_run(void *priv)
 	}
 
 	/* sync on channel control descriptors for output ports */
-	if (d_q_data->colorspace == V4L2_COLORSPACE_SRGB) {
+	if (d_q_data->format.fmt.pix_mp.colorspace == V4L2_COLORSPACE_SRGB) {
 		vpdma_add_sync_on_channel_ctd(&ctx->desc_list,
 			VPE_CHAN_RGB_OUT);
 	} else {
@@ -1559,7 +1564,6 @@ static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
 	struct vpe_ctx *ctx = file->private_data;
 	struct vb2_queue *vq;
 	struct vpe_q_data *q_data;
-	int i;
 
 	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
 	if (!vq)
@@ -1569,27 +1573,15 @@ static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
 	if (!q_data)
 		return -EINVAL;
 
-	pix->width = q_data->width;
-	pix->height = q_data->height;
-	pix->pixelformat = q_data->fmt->fourcc;
-	pix->field = q_data->field;
+	*f = q_data->format;
 
-	if (V4L2_TYPE_IS_OUTPUT(f->type)) {
-		pix->colorspace = q_data->colorspace;
-	} else {
+	if (!V4L2_TYPE_IS_OUTPUT(f->type)) {
 		struct vpe_q_data *s_q_data;
 
 		/* get colorspace from the source queue */
 		s_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
 
-		pix->colorspace = s_q_data->colorspace;
-	}
-
-	pix->num_planes = q_data->nplanes;
-
-	for (i = 0; i < pix->num_planes; i++) {
-		pix->plane_fmt[i].bytesperline = q_data->bytesperline[i];
-		pix->plane_fmt[i].sizeimage = q_data->sizeimage[i];
+		pix->colorspace = s_q_data->format.fmt.pix_mp.colorspace;
 	}
 
 	return 0;
@@ -1736,10 +1728,8 @@ static int vpe_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
 static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
 {
 	struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
-	struct v4l2_plane_pix_format *plane_fmt;
 	struct vpe_q_data *q_data;
 	struct vb2_queue *vq;
-	int i;
 
 	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
 	if (!vq)
@@ -1755,29 +1745,18 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
 		return -EINVAL;
 
 	q_data->fmt		= find_format(f);
-	q_data->width		= pix->width;
-	q_data->height		= pix->height;
-	q_data->colorspace	= pix->colorspace;
-	q_data->field		= pix->field;
-	q_data->nplanes		= pix->num_planes;
-
-	for (i = 0; i < pix->num_planes; i++) {
-		plane_fmt = &pix->plane_fmt[i];
-
-		q_data->bytesperline[i]	= plane_fmt->bytesperline;
-		q_data->sizeimage[i]	= plane_fmt->sizeimage;
-	}
+	q_data->format = *f;
 
 	q_data->c_rect.left	= 0;
 	q_data->c_rect.top	= 0;
-	q_data->c_rect.width	= q_data->width;
-	q_data->c_rect.height	= q_data->height;
+	q_data->c_rect.width	= pix->width;
+	q_data->c_rect.height	= pix->height;
 
-	if (q_data->field == V4L2_FIELD_ALTERNATE)
+	if (q_data->format.fmt.pix_mp.field == V4L2_FIELD_ALTERNATE)
 		q_data->flags |= Q_DATA_INTERLACED_ALTERNATE;
-	else if (q_data->field == V4L2_FIELD_SEQ_TB)
+	else if (q_data->format.fmt.pix_mp.field == V4L2_FIELD_SEQ_TB)
 		q_data->flags |= Q_DATA_INTERLACED_SEQ_TB;
-	else if (q_data->field == V4L2_FIELD_SEQ_BT)
+	else if (q_data->format.fmt.pix_mp.field == V4L2_FIELD_SEQ_BT)
 		q_data->flags |= Q_DATA_INTERLACED_SEQ_BT;
 	else
 		q_data->flags &= ~Q_IS_INTERLACED;
@@ -1787,11 +1766,11 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
 		q_data->c_rect.height /= 2;
 
 	vpe_dbg(ctx->dev, "Setting format for type %d, wxh: %dx%d, fmt: %d bpl_y %d",
-		f->type, q_data->width, q_data->height, q_data->fmt->fourcc,
-		q_data->bytesperline[VPE_LUMA]);
-	if (q_data->nplanes == 2)
+		f->type, pix->width, pix->height, pix->pixelformat,
+		pix->plane_fmt[0].bytesperline);
+	if (pix->num_planes == 2)
 		vpe_dbg(ctx->dev, " bpl_uv %d\n",
-			q_data->bytesperline[VPE_CHROMA]);
+			pix->plane_fmt[1].bytesperline);
 
 	return 0;
 }
@@ -1820,6 +1799,7 @@ static int vpe_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
 static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
 {
 	struct vpe_q_data *q_data;
+	struct v4l2_pix_format_mplane *pix;
 	int height;
 
 	if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
@@ -1830,6 +1810,8 @@ static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
 	if (!q_data)
 		return -EINVAL;
 
+	pix = &q_data->format.fmt.pix_mp;
+
 	switch (s->target) {
 	case V4L2_SEL_TGT_COMPOSE:
 		/*
@@ -1860,23 +1842,23 @@ static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
 	 * the field height, not the buffer height
 	 */
 	if (q_data->flags & Q_IS_SEQ_XX)
-		height = q_data->height / 2;
+		height = pix->height / 2;
 	else
-		height = q_data->height;
+		height = pix->height;
 
 	if (s->r.top < 0 || s->r.left < 0) {
 		vpe_err(ctx->dev, "negative values for top and left\n");
 		s->r.top = s->r.left = 0;
 	}
 
-	v4l_bound_align_image(&s->r.width, MIN_W, q_data->width, 1,
+	v4l_bound_align_image(&s->r.width, MIN_W, pix->width, 1,
 		&s->r.height, MIN_H, height, H_ALIGN, S_ALIGN);
 
 	/* adjust left/top if cropping rectangle is out of bounds */
-	if (s->r.left + s->r.width > q_data->width)
-		s->r.left = q_data->width - s->r.width;
-	if (s->r.top + s->r.height > q_data->height)
-		s->r.top = q_data->height - s->r.height;
+	if (s->r.left + s->r.width > pix->width)
+		s->r.left = pix->width - s->r.width;
+	if (s->r.top + s->r.height > pix->height)
+		s->r.top = pix->height - s->r.height;
 
 	return 0;
 }
@@ -1886,6 +1868,7 @@ static int vpe_g_selection(struct file *file, void *fh,
 {
 	struct vpe_ctx *ctx = file->private_data;
 	struct vpe_q_data *q_data;
+	struct v4l2_pix_format_mplane *pix;
 	bool use_c_rect = false;
 
 	if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
@@ -1896,6 +1879,8 @@ static int vpe_g_selection(struct file *file, void *fh,
 	if (!q_data)
 		return -EINVAL;
 
+	pix = &q_data->format.fmt.pix_mp;
+
 	switch (s->target) {
 	case V4L2_SEL_TGT_COMPOSE_DEFAULT:
 	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
@@ -1934,8 +1919,8 @@ static int vpe_g_selection(struct file *file, void *fh,
 		 */
 		s->r.left = 0;
 		s->r.top = 0;
-		s->r.width = q_data->width;
-		s->r.height = q_data->height;
+		s->r.width = pix->width;
+		s->r.height = pix->height;
 	}
 
 	return 0;
@@ -2043,14 +2028,14 @@ static int vpe_queue_setup(struct vb2_queue *vq,
 	if (!q_data)
 		return -EINVAL;
 
-	*nplanes = q_data->nplanes;
+	*nplanes = q_data->format.fmt.pix_mp.num_planes;
 
 	for (i = 0; i < *nplanes; i++)
-		sizes[i] = q_data->sizeimage[i];
+		sizes[i] = q_data->format.fmt.pix_mp.plane_fmt[i].sizeimage;
 
 	vpe_dbg(ctx->dev, "get %d buffer(s) of size %d", *nbuffers,
 		sizes[VPE_LUMA]);
-	if (q_data->nplanes == 2)
+	if (*nplanes == 2)
 		vpe_dbg(ctx->dev, " and %d\n", sizes[VPE_CHROMA]);
 
 	return 0;
@@ -2061,14 +2046,16 @@ static int vpe_buf_prepare(struct vb2_buffer *vb)
 	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 	struct vpe_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
 	struct vpe_q_data *q_data;
-	int i, num_planes;
+	struct v4l2_pix_format_mplane *pix;
+	int i;
 
 	vpe_dbg(ctx->dev, "type: %d\n", vb->vb2_queue->type);
 
 	q_data = get_q_data(ctx, vb->vb2_queue->type);
 	if (!q_data)
 		return -EINVAL;
-	num_planes = q_data->nplanes;
+
+	pix = &q_data->format.fmt.pix_mp;
 
 	if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
 		if (!(q_data->flags & Q_IS_INTERLACED)) {
@@ -2082,18 +2069,18 @@ static int vpe_buf_prepare(struct vb2_buffer *vb)
 		}
 	}
 
-	for (i = 0; i < num_planes; i++) {
-		if (vb2_plane_size(vb, i) < q_data->sizeimage[i]) {
+	for (i = 0; i < pix->num_planes; i++) {
+		if (vb2_plane_size(vb, i) < pix->plane_fmt[i].sizeimage) {
 			vpe_err(ctx->dev,
 				"data will not fit into plane (%lu < %lu)\n",
 				vb2_plane_size(vb, i),
-				(long) q_data->sizeimage[i]);
+				(long) pix->plane_fmt[i].sizeimage);
 			return -EINVAL;
 		}
 	}
 
-	for (i = 0; i < num_planes; i++)
-		vb2_set_plane_payload(vb, i, q_data->sizeimage[i]);
+	for (i = 0; i < pix->num_planes; i++)
+		vb2_set_plane_payload(vb, i, pix->plane_fmt[i].sizeimage);
 
 	return 0;
 }
@@ -2278,6 +2265,7 @@ static int vpe_open(struct file *file)
 	struct vpe_q_data *s_q_data;
 	struct v4l2_ctrl_handler *hdl;
 	struct vpe_ctx *ctx;
+	struct v4l2_pix_format_mplane *pix;
 	int ret;
 
 	vpe_dbg(dev, "vpe_open\n");
@@ -2326,23 +2314,32 @@ static int vpe_open(struct file *file)
 	v4l2_ctrl_handler_setup(hdl);
 
 	s_q_data = &ctx->q_data[Q_DATA_SRC];
+	pix = &s_q_data->format.fmt.pix_mp;
 	s_q_data->fmt = __find_format(V4L2_PIX_FMT_YUYV);
-	s_q_data->width = 1920;
-	s_q_data->height = 1080;
-	s_q_data->nplanes = 1;
-	s_q_data->bytesperline[VPE_LUMA] = (s_q_data->width *
+	pix->pixelformat = s_q_data->fmt->fourcc;
+	s_q_data->format.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
+	pix->width = 1920;
+	pix->height = 1080;
+	pix->num_planes = 1;
+	pix->plane_fmt[VPE_LUMA].bytesperline = (pix->width *
 			s_q_data->fmt->vpdma_fmt[VPE_LUMA]->depth) >> 3;
-	s_q_data->sizeimage[VPE_LUMA] = (s_q_data->bytesperline[VPE_LUMA] *
-			s_q_data->height);
-	s_q_data->colorspace = V4L2_COLORSPACE_REC709;
-	s_q_data->field = V4L2_FIELD_NONE;
+	pix->plane_fmt[VPE_LUMA].sizeimage =
+			pix->plane_fmt[VPE_LUMA].bytesperline *
+			pix->height;
+	pix->colorspace = V4L2_COLORSPACE_REC709;
+	pix->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+	pix->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+	pix->quantization = V4L2_QUANTIZATION_DEFAULT;
+	pix->field = V4L2_FIELD_NONE;
 	s_q_data->c_rect.left = 0;
 	s_q_data->c_rect.top = 0;
-	s_q_data->c_rect.width = s_q_data->width;
-	s_q_data->c_rect.height = s_q_data->height;
+	s_q_data->c_rect.width = pix->width;
+	s_q_data->c_rect.height = pix->height;
 	s_q_data->flags = 0;
 
 	ctx->q_data[Q_DATA_DST] = *s_q_data;
+	ctx->q_data[Q_DATA_DST].format.type =
+			V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
 
 	set_dei_shadow_registers(ctx);
 	set_src_registers(ctx);
-- 
2.17.1

[Patch v2 16/21] media: ti-vpe: vpe: use standard struct instead of duplicating fields

[Benoit Parrot]

For each queue we need to maintain resolutions, pixel format,
bytesperline, sizeimage, colorspace, etc.

Instead of manually adding more entries in the vpe_q_data struct, it is
better to just add a "struct v4l2_format" member and use that to store
all needed information.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 185 ++++++++++++++--------------
 1 file changed, 91 insertions(+), 94 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index d7f8eb901475..5b1e9908fff2 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -319,14 +319,9 @@ static struct vpe_fmt vpe_formats[] = {
  * there is one source queue and one destination queue for each m2m context.
  */
 struct vpe_q_data {
-	unsigned int		width;				/* frame width */
-	unsigned int		height;				/* frame height */
-	unsigned int		nplanes;			/* Current number of planes */
-	unsigned int		bytesperline[VPE_MAX_PLANES];	/* bytes per line in memory */
-	enum v4l2_colorspace	colorspace;
-	enum v4l2_field		field;				/* supported field value */
+	/* current v4l2 format info */
+	struct v4l2_format	format;
 	unsigned int		flags;
-	unsigned int		sizeimage[VPE_MAX_PLANES];	/* image size in memory */
 	struct v4l2_rect	c_rect;				/* crop/compose rectangle */
 	struct vpe_fmt		*fmt;				/* format info */
 };
@@ -761,7 +756,8 @@ static void set_src_registers(struct vpe_ctx *ctx)
 static void set_dst_registers(struct vpe_ctx *ctx)
 {
 	struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
-	enum v4l2_colorspace clrspc = ctx->q_data[Q_DATA_DST].colorspace;
+	enum v4l2_colorspace clrspc =
+			ctx->q_data[Q_DATA_DST].format.fmt.pix_mp.colorspace;
 	struct vpe_fmt *fmt = ctx->q_data[Q_DATA_DST].fmt;
 	u32 val = 0;
 
@@ -868,11 +864,15 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
 	unsigned int src_h = s_q_data->c_rect.height;
 	unsigned int dst_w = d_q_data->c_rect.width;
 	unsigned int dst_h = d_q_data->c_rect.height;
+	struct v4l2_pix_format_mplane *spix;
+	struct v4l2_pix_format_mplane *dpix;
 	size_t mv_buf_size;
 	int ret;
 
 	ctx->sequence = 0;
 	ctx->field = V4L2_FIELD_TOP;
+	spix = &s_q_data->format.fmt.pix_mp;
+	dpix = &d_q_data->format.fmt.pix_mp;
 
 	if ((s_q_data->flags & Q_IS_INTERLACED) &&
 			!(d_q_data->flags & Q_IS_INTERLACED)) {
@@ -887,9 +887,9 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
 		 * extra space will not be used by the de-interlacer, but will
 		 * ensure that vpdma operates correctly
 		 */
-		bytes_per_line = ALIGN((s_q_data->width * mv->depth) >> 3,
-					VPDMA_STRIDE_ALIGN);
-		mv_buf_size = bytes_per_line * s_q_data->height;
+		bytes_per_line = ALIGN((spix->width * mv->depth) >> 3,
+				       VPDMA_STRIDE_ALIGN);
+		mv_buf_size = bytes_per_line * spix->height;
 
 		ctx->deinterlacing = true;
 		src_h <<= 1;
@@ -909,7 +909,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
 	set_dei_regs(ctx);
 
 	csc_set_coeff(ctx->dev->csc, &mmr_adb->csc_regs[0],
-		s_q_data->colorspace, d_q_data->colorspace);
+		      spix->colorspace, dpix->colorspace);
 
 	sc_set_hs_coeffs(ctx->dev->sc, ctx->sc_coeff_h.addr, src_w, dst_w);
 	sc_set_vs_coeffs(ctx->dev->sc, ctx->sc_coeff_v.addr, src_h, dst_h);
@@ -1023,6 +1023,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 	struct vpe_fmt *fmt = q_data->fmt;
 	const struct vpdma_data_format *vpdma_fmt;
 	int mv_buf_selector = !ctx->src_mv_buf_selector;
+	struct v4l2_pix_format_mplane *pix;
 	dma_addr_t dma_addr;
 	u32 flags = 0;
 	u32 offset = 0;
@@ -1032,21 +1033,23 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 		vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
 		dma_addr = ctx->mv_buf_dma[mv_buf_selector];
 		q_data = &ctx->q_data[Q_DATA_SRC];
-		stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
+		pix = &q_data->format.fmt.pix_mp;
+		stride = ALIGN((pix->width * vpdma_fmt->depth) >> 3,
 			       VPDMA_STRIDE_ALIGN);
 	} else {
 		/* to incorporate interleaved formats */
 		int plane = fmt->coplanar ? p_data->vb_part : 0;
 
+		pix = &q_data->format.fmt.pix_mp;
 		vpdma_fmt = fmt->vpdma_fmt[plane];
 		/*
 		 * If we are using a single plane buffer and
 		 * we need to set a separate vpdma chroma channel.
 		 */
-		if (q_data->nplanes == 1 && plane) {
+		if (pix->num_planes == 1 && plane) {
 			dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
 			/* Compute required offset */
-			offset = q_data->bytesperline[0] * q_data->height;
+			offset = pix->plane_fmt[0].bytesperline * pix->height;
 		} else {
 			dma_addr = vb2_dma_contig_plane_dma_addr(vb, plane);
 			/* Use address as is, no offset */
@@ -1060,7 +1063,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 		}
 		/* Apply the offset */
 		dma_addr += offset;
-		stride = q_data->bytesperline[VPE_LUMA];
+		stride = pix->plane_fmt[VPE_LUMA].bytesperline;
 	}
 
 	if (q_data->flags & Q_DATA_FRAME_1D)
@@ -1071,7 +1074,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 	vpdma_set_max_size(ctx->dev->vpdma, VPDMA_MAX_SIZE1,
 			   MAX_W, MAX_H);
 
-	vpdma_add_out_dtd(&ctx->desc_list, q_data->width,
+	vpdma_add_out_dtd(&ctx->desc_list, pix->width,
 			  stride, &q_data->c_rect,
 			  vpdma_fmt, dma_addr, MAX_OUT_WIDTH_REG1,
 			  MAX_OUT_HEIGHT_REG1, p_data->channel, flags);
@@ -1084,6 +1087,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 	struct vb2_buffer *vb = &ctx->src_vbs[p_data->vb_index]->vb2_buf;
 	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 	struct vpe_fmt *fmt = q_data->fmt;
+	struct v4l2_pix_format_mplane *pix;
 	const struct vpdma_data_format *vpdma_fmt;
 	int mv_buf_selector = ctx->src_mv_buf_selector;
 	int field = vbuf->field == V4L2_FIELD_BOTTOM;
@@ -1093,10 +1097,11 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 	u32 offset = 0;
 	u32 stride;
 
+	pix = &q_data->format.fmt.pix_mp;
 	if (port == VPE_PORT_MV_IN) {
 		vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
 		dma_addr = ctx->mv_buf_dma[mv_buf_selector];
-		stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
+		stride = ALIGN((pix->width * vpdma_fmt->depth) >> 3,
 			       VPDMA_STRIDE_ALIGN);
 	} else {
 		/* to incorporate interleaved formats */
@@ -1107,10 +1112,10 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 		 * If we are using a single plane buffer and
 		 * we need to set a separate vpdma chroma channel.
 		 */
-		if (q_data->nplanes == 1 && plane) {
+		if (pix->num_planes == 1 && plane) {
 			dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
 			/* Compute required offset */
-			offset = q_data->bytesperline[0] * q_data->height;
+			offset = pix->plane_fmt[0].bytesperline * pix->height;
 		} else {
 			dma_addr = vb2_dma_contig_plane_dma_addr(vb, plane);
 			/* Use address as is, no offset */
@@ -1124,7 +1129,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 		}
 		/* Apply the offset */
 		dma_addr += offset;
-		stride = q_data->bytesperline[VPE_LUMA];
+		stride = pix->plane_fmt[VPE_LUMA].bytesperline;
 
 		/*
 		 * field used in VPDMA desc  = 0 (top) / 1 (bottom)
@@ -1144,7 +1149,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 			field = (field + p_data->vb_index + ctx->sequence) % 2;
 
 			if (field) {
-				int height = q_data->height / 2;
+				int height = pix->height / 2;
 				int bpp;
 
 				if (fmt->fourcc == V4L2_PIX_FMT_NV12 ||
@@ -1156,7 +1161,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 				if (plane)
 					height /= 2;
 
-				dma_addr += q_data->width * height * bpp;
+				dma_addr += pix->width * height * bpp;
 			}
 		}
 	}
@@ -1173,7 +1178,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 				fmt->fourcc == V4L2_PIX_FMT_NV21))
 		frame_height /= 2;
 
-	vpdma_add_in_dtd(&ctx->desc_list, q_data->width, stride,
+	vpdma_add_in_dtd(&ctx->desc_list, pix->width, stride,
 			 &q_data->c_rect, vpdma_fmt, dma_addr,
 			 p_data->channel, field, flags, frame_width,
 			 frame_height, 0, 0);
@@ -1282,7 +1287,7 @@ static void device_run(void *priv)
 	if (ctx->deinterlacing)
 		add_out_dtd(ctx, VPE_PORT_MV_OUT);
 
-	if (d_q_data->colorspace == V4L2_COLORSPACE_SRGB) {
+	if (d_q_data->format.fmt.pix_mp.colorspace == V4L2_COLORSPACE_SRGB) {
 		add_out_dtd(ctx, VPE_PORT_RGB_OUT);
 	} else {
 		add_out_dtd(ctx, VPE_PORT_LUMA_OUT);
@@ -1324,7 +1329,7 @@ static void device_run(void *priv)
 	}
 
 	/* sync on channel control descriptors for output ports */
-	if (d_q_data->colorspace == V4L2_COLORSPACE_SRGB) {
+	if (d_q_data->format.fmt.pix_mp.colorspace == V4L2_COLORSPACE_SRGB) {
 		vpdma_add_sync_on_channel_ctd(&ctx->desc_list,
 			VPE_CHAN_RGB_OUT);
 	} else {
@@ -1559,7 +1564,6 @@ static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
 	struct vpe_ctx *ctx = file->private_data;
 	struct vb2_queue *vq;
 	struct vpe_q_data *q_data;
-	int i;
 
 	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
 	if (!vq)
@@ -1569,27 +1573,15 @@ static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
 	if (!q_data)
 		return -EINVAL;
 
-	pix->width = q_data->width;
-	pix->height = q_data->height;
-	pix->pixelformat = q_data->fmt->fourcc;
-	pix->field = q_data->field;
+	*f = q_data->format;
 
-	if (V4L2_TYPE_IS_OUTPUT(f->type)) {
-		pix->colorspace = q_data->colorspace;
-	} else {
+	if (!V4L2_TYPE_IS_OUTPUT(f->type)) {
 		struct vpe_q_data *s_q_data;
 
 		/* get colorspace from the source queue */
 		s_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
 
-		pix->colorspace = s_q_data->colorspace;
-	}
-
-	pix->num_planes = q_data->nplanes;
-
-	for (i = 0; i < pix->num_planes; i++) {
-		pix->plane_fmt[i].bytesperline = q_data->bytesperline[i];
-		pix->plane_fmt[i].sizeimage = q_data->sizeimage[i];
+		pix->colorspace = s_q_data->format.fmt.pix_mp.colorspace;
 	}
 
 	return 0;
@@ -1736,10 +1728,8 @@ static int vpe_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
 static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
 {
 	struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
-	struct v4l2_plane_pix_format *plane_fmt;
 	struct vpe_q_data *q_data;
 	struct vb2_queue *vq;
-	int i;
 
 	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
 	if (!vq)
@@ -1755,29 +1745,18 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
 		return -EINVAL;
 
 	q_data->fmt		= find_format(f);
-	q_data->width		= pix->width;
-	q_data->height		= pix->height;
-	q_data->colorspace	= pix->colorspace;
-	q_data->field		= pix->field;
-	q_data->nplanes		= pix->num_planes;
-
-	for (i = 0; i < pix->num_planes; i++) {
-		plane_fmt = &pix->plane_fmt[i];
-
-		q_data->bytesperline[i]	= plane_fmt->bytesperline;
-		q_data->sizeimage[i]	= plane_fmt->sizeimage;
-	}
+	q_data->format = *f;
 
 	q_data->c_rect.left	= 0;
 	q_data->c_rect.top	= 0;
-	q_data->c_rect.width	= q_data->width;
-	q_data->c_rect.height	= q_data->height;
+	q_data->c_rect.width	= pix->width;
+	q_data->c_rect.height	= pix->height;
 
-	if (q_data->field == V4L2_FIELD_ALTERNATE)
+	if (q_data->format.fmt.pix_mp.field == V4L2_FIELD_ALTERNATE)
 		q_data->flags |= Q_DATA_INTERLACED_ALTERNATE;
-	else if (q_data->field == V4L2_FIELD_SEQ_TB)
+	else if (q_data->format.fmt.pix_mp.field == V4L2_FIELD_SEQ_TB)
 		q_data->flags |= Q_DATA_INTERLACED_SEQ_TB;
-	else if (q_data->field == V4L2_FIELD_SEQ_BT)
+	else if (q_data->format.fmt.pix_mp.field == V4L2_FIELD_SEQ_BT)
 		q_data->flags |= Q_DATA_INTERLACED_SEQ_BT;
 	else
 		q_data->flags &= ~Q_IS_INTERLACED;
@@ -1787,11 +1766,11 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
 		q_data->c_rect.height /= 2;
 
 	vpe_dbg(ctx->dev, "Setting format for type %d, wxh: %dx%d, fmt: %d bpl_y %d",
-		f->type, q_data->width, q_data->height, q_data->fmt->fourcc,
-		q_data->bytesperline[VPE_LUMA]);
-	if (q_data->nplanes == 2)
+		f->type, pix->width, pix->height, pix->pixelformat,
+		pix->plane_fmt[0].bytesperline);
+	if (pix->num_planes == 2)
 		vpe_dbg(ctx->dev, " bpl_uv %d\n",
-			q_data->bytesperline[VPE_CHROMA]);
+			pix->plane_fmt[1].bytesperline);
 
 	return 0;
 }
@@ -1820,6 +1799,7 @@ static int vpe_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
 static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
 {
 	struct vpe_q_data *q_data;
+	struct v4l2_pix_format_mplane *pix;
 	int height;
 
 	if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
@@ -1830,6 +1810,8 @@ static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
 	if (!q_data)
 		return -EINVAL;
 
+	pix = &q_data->format.fmt.pix_mp;
+
 	switch (s->target) {
 	case V4L2_SEL_TGT_COMPOSE:
 		/*
@@ -1860,23 +1842,23 @@ static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
 	 * the field height, not the buffer height
 	 */
 	if (q_data->flags & Q_IS_SEQ_XX)
-		height = q_data->height / 2;
+		height = pix->height / 2;
 	else
-		height = q_data->height;
+		height = pix->height;
 
 	if (s->r.top < 0 || s->r.left < 0) {
 		vpe_err(ctx->dev, "negative values for top and left\n");
 		s->r.top = s->r.left = 0;
 	}
 
-	v4l_bound_align_image(&s->r.width, MIN_W, q_data->width, 1,
+	v4l_bound_align_image(&s->r.width, MIN_W, pix->width, 1,
 		&s->r.height, MIN_H, height, H_ALIGN, S_ALIGN);
 
 	/* adjust left/top if cropping rectangle is out of bounds */
-	if (s->r.left + s->r.width > q_data->width)
-		s->r.left = q_data->width - s->r.width;
-	if (s->r.top + s->r.height > q_data->height)
-		s->r.top = q_data->height - s->r.height;
+	if (s->r.left + s->r.width > pix->width)
+		s->r.left = pix->width - s->r.width;
+	if (s->r.top + s->r.height > pix->height)
+		s->r.top = pix->height - s->r.height;
 
 	return 0;
 }
@@ -1886,6 +1868,7 @@ static int vpe_g_selection(struct file *file, void *fh,
 {
 	struct vpe_ctx *ctx = file->private_data;
 	struct vpe_q_data *q_data;
+	struct v4l2_pix_format_mplane *pix;
 	bool use_c_rect = false;
 
 	if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
@@ -1896,6 +1879,8 @@ static int vpe_g_selection(struct file *file, void *fh,
 	if (!q_data)
 		return -EINVAL;
 
+	pix = &q_data->format.fmt.pix_mp;
+
 	switch (s->target) {
 	case V4L2_SEL_TGT_COMPOSE_DEFAULT:
 	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
@@ -1934,8 +1919,8 @@ static int vpe_g_selection(struct file *file, void *fh,
 		 */
 		s->r.left = 0;
 		s->r.top = 0;
-		s->r.width = q_data->width;
-		s->r.height = q_data->height;
+		s->r.width = pix->width;
+		s->r.height = pix->height;
 	}
 
 	return 0;
@@ -2043,14 +2028,14 @@ static int vpe_queue_setup(struct vb2_queue *vq,
 	if (!q_data)
 		return -EINVAL;
 
-	*nplanes = q_data->nplanes;
+	*nplanes = q_data->format.fmt.pix_mp.num_planes;
 
 	for (i = 0; i < *nplanes; i++)
-		sizes[i] = q_data->sizeimage[i];
+		sizes[i] = q_data->format.fmt.pix_mp.plane_fmt[i].sizeimage;
 
 	vpe_dbg(ctx->dev, "get %d buffer(s) of size %d", *nbuffers,
 		sizes[VPE_LUMA]);
-	if (q_data->nplanes == 2)
+	if (*nplanes == 2)
 		vpe_dbg(ctx->dev, " and %d\n", sizes[VPE_CHROMA]);
 
 	return 0;
@@ -2061,14 +2046,16 @@ static int vpe_buf_prepare(struct vb2_buffer *vb)
 	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 	struct vpe_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
 	struct vpe_q_data *q_data;
-	int i, num_planes;
+	struct v4l2_pix_format_mplane *pix;
+	int i;
 
 	vpe_dbg(ctx->dev, "type: %d\n", vb->vb2_queue->type);
 
 	q_data = get_q_data(ctx, vb->vb2_queue->type);
 	if (!q_data)
 		return -EINVAL;
-	num_planes = q_data->nplanes;
+
+	pix = &q_data->format.fmt.pix_mp;
 
 	if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
 		if (!(q_data->flags & Q_IS_INTERLACED)) {
@@ -2082,18 +2069,18 @@ static int vpe_buf_prepare(struct vb2_buffer *vb)
 		}
 	}
 
-	for (i = 0; i < num_planes; i++) {
-		if (vb2_plane_size(vb, i) < q_data->sizeimage[i]) {
+	for (i = 0; i < pix->num_planes; i++) {
+		if (vb2_plane_size(vb, i) < pix->plane_fmt[i].sizeimage) {
 			vpe_err(ctx->dev,
 				"data will not fit into plane (%lu < %lu)\n",
 				vb2_plane_size(vb, i),
-				(long) q_data->sizeimage[i]);
+				(long) pix->plane_fmt[i].sizeimage);
 			return -EINVAL;
 		}
 	}
 
-	for (i = 0; i < num_planes; i++)
-		vb2_set_plane_payload(vb, i, q_data->sizeimage[i]);
+	for (i = 0; i < pix->num_planes; i++)
+		vb2_set_plane_payload(vb, i, pix->plane_fmt[i].sizeimage);
 
 	return 0;
 }
@@ -2278,6 +2265,7 @@ static int vpe_open(struct file *file)
 	struct vpe_q_data *s_q_data;
 	struct v4l2_ctrl_handler *hdl;
 	struct vpe_ctx *ctx;
+	struct v4l2_pix_format_mplane *pix;
 	int ret;
 
 	vpe_dbg(dev, "vpe_open\n");
@@ -2326,23 +2314,32 @@ static int vpe_open(struct file *file)
 	v4l2_ctrl_handler_setup(hdl);
 
 	s_q_data = &ctx->q_data[Q_DATA_SRC];
+	pix = &s_q_data->format.fmt.pix_mp;
 	s_q_data->fmt = __find_format(V4L2_PIX_FMT_YUYV);
-	s_q_data->width = 1920;
-	s_q_data->height = 1080;
-	s_q_data->nplanes = 1;
-	s_q_data->bytesperline[VPE_LUMA] = (s_q_data->width *
+	pix->pixelformat = s_q_data->fmt->fourcc;
+	s_q_data->format.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
+	pix->width = 1920;
+	pix->height = 1080;
+	pix->num_planes = 1;
+	pix->plane_fmt[VPE_LUMA].bytesperline = (pix->width *
 			s_q_data->fmt->vpdma_fmt[VPE_LUMA]->depth) >> 3;
-	s_q_data->sizeimage[VPE_LUMA] = (s_q_data->bytesperline[VPE_LUMA] *
-			s_q_data->height);
-	s_q_data->colorspace = V4L2_COLORSPACE_REC709;
-	s_q_data->field = V4L2_FIELD_NONE;
+	pix->plane_fmt[VPE_LUMA].sizeimage =
+			pix->plane_fmt[VPE_LUMA].bytesperline *
+			pix->height;
+	pix->colorspace = V4L2_COLORSPACE_REC709;
+	pix->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+	pix->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+	pix->quantization = V4L2_QUANTIZATION_DEFAULT;
+	pix->field = V4L2_FIELD_NONE;
 	s_q_data->c_rect.left = 0;
 	s_q_data->c_rect.top = 0;
-	s_q_data->c_rect.width = s_q_data->width;
-	s_q_data->c_rect.height = s_q_data->height;
+	s_q_data->c_rect.width = pix->width;
+	s_q_data->c_rect.height = pix->height;
 	s_q_data->flags = 0;
 
 	ctx->q_data[Q_DATA_DST] = *s_q_data;
+	ctx->q_data[Q_DATA_DST].format.type =
+			V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
 
 	set_dei_shadow_registers(ctx);
 	set_src_registers(ctx);
-- 
2.17.1

[Patch v2 17/21] media: ti-vpe: vpe: fix v4l2_compliance issue related to xfer_func

[Benoit Parrot]

All 4 of the "colorspace" components were not originally handled.
Causing issue related to xfer_func not being initialized properly.

This was found with v4l2-compliance test.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 5b1e9908fff2..19b027c5478a 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1578,10 +1578,13 @@ static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
 	if (!V4L2_TYPE_IS_OUTPUT(f->type)) {
 		struct vpe_q_data *s_q_data;
 
-		/* get colorspace from the source queue */
+		/* get colorimetry from the source queue */
 		s_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
 
 		pix->colorspace = s_q_data->format.fmt.pix_mp.colorspace;
+		pix->xfer_func = s_q_data->format.fmt.pix_mp.xfer_func;
+		pix->ycbcr_enc = s_q_data->format.fmt.pix_mp.ycbcr_enc;
+		pix->quantization = s_q_data->format.fmt.pix_mp.quantization;
 	}
 
 	return 0;
-- 
2.17.1

[Patch v2 17/21] media: ti-vpe: vpe: fix v4l2_compliance issue related to xfer_func

[Benoit Parrot]

All 4 of the "colorspace" components were not originally handled.
Causing issue related to xfer_func not being initialized properly.

This was found with v4l2-compliance test.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 5b1e9908fff2..19b027c5478a 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1578,10 +1578,13 @@ static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
 	if (!V4L2_TYPE_IS_OUTPUT(f->type)) {
 		struct vpe_q_data *s_q_data;
 
-		/* get colorspace from the source queue */
+		/* get colorimetry from the source queue */
 		s_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
 
 		pix->colorspace = s_q_data->format.fmt.pix_mp.colorspace;
+		pix->xfer_func = s_q_data->format.fmt.pix_mp.xfer_func;
+		pix->ycbcr_enc = s_q_data->format.fmt.pix_mp.ycbcr_enc;
+		pix->quantization = s_q_data->format.fmt.pix_mp.quantization;
 	}
 
 	return 0;
-- 
2.17.1

[Patch v2 18/21] media: ti-vpe: csc: rgb-to-yuv HD full range coeff are wrong

[Benoit Parrot]

The RGB to YUV HD full range coefficients did not match the TRM values
and appeared to be a cut-n-paste from the YUV to RGB section.

Replace the entries with the values from the TRM.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/csc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/csc.c b/drivers/media/platform/ti-vpe/csc.c
index eda2a5985da7..f0c45d187b5f 100644
--- a/drivers/media/platform/ti-vpe/csc.c
+++ b/drivers/media/platform/ti-vpe/csc.c
@@ -81,8 +81,8 @@ static struct colorspace_coeffs colorspace_coeffs[4] = {
 		},
 		{
 			/* HDTV */
-			0x04A8, 0x0000, 0x072C, 0x04A8, 0x1F26, 0x1DDE,
-			0x04A8, 0x0873, 0x0000, 0x0C20, 0x0134, 0x0B7C,
+			0x00bb, 0x0275, 0x003f, 0x1f99, 0x1ea5, 0x01c2,
+			0x01c2, 0x1e67, 0x1fd7, 0x0040, 0x0200, 0x0200,
 		},
 	},
 };
-- 
2.17.1

[Patch v2 18/21] media: ti-vpe: csc: rgb-to-yuv HD full range coeff are wrong

[Benoit Parrot]

The RGB to YUV HD full range coefficients did not match the TRM values
and appeared to be a cut-n-paste from the YUV to RGB section.

Replace the entries with the values from the TRM.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/csc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/csc.c b/drivers/media/platform/ti-vpe/csc.c
index eda2a5985da7..f0c45d187b5f 100644
--- a/drivers/media/platform/ti-vpe/csc.c
+++ b/drivers/media/platform/ti-vpe/csc.c
@@ -81,8 +81,8 @@ static struct colorspace_coeffs colorspace_coeffs[4] = {
 		},
 		{
 			/* HDTV */
-			0x04A8, 0x0000, 0x072C, 0x04A8, 0x1F26, 0x1DDE,
-			0x04A8, 0x0873, 0x0000, 0x0C20, 0x0134, 0x0B7C,
+			0x00bb, 0x0275, 0x003f, 0x1f99, 0x1ea5, 0x01c2,
+			0x01c2, 0x1e67, 0x1fd7, 0x0040, 0x0200, 0x0200,
 		},
 	},
 };
-- 
2.17.1

[Patch v2 19/21] media: v4l2-common: add pixel encoding support

[Benoit Parrot]

It is often useful to figure out if a pixel_format is either YUV or RGB
especially for driver who can perform the pixel encoding conversion.

Instead of having each driver implement its own "is_this_yuv/rgb"
function based on a restricted set of pixel value, it is better to do
this in centralized manner.

We therefore add a pix_enc member to the v4l2_format_info structure to
quickly identify the related pixel encoding.
And add helper function to find/check pixel encoding.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/v4l2-core/v4l2-common.c | 162 ++++++++++++++++----------
 include/media/v4l2-common.h           |  20 ++++
 2 files changed, 119 insertions(+), 63 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
index 62f7aa92ac29..474cdb5863f4 100644
--- a/drivers/media/v4l2-core/v4l2-common.c
+++ b/drivers/media/v4l2-core/v4l2-common.c
@@ -236,77 +236,77 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
 {
 	static const struct v4l2_format_info formats[] = {
 		/* RGB formats */
-		{ .format = V4L2_PIX_FMT_BGR24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_RGB24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_HSV24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_BGR32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_XBGR32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_BGRX32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_RGB32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_XRGB32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_RGBX32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_HSV32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_ARGB32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_RGBA32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_ABGR32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_BGRA32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_GREY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_BGR24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_RGB24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_HSV24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_BGR32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_XBGR32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_BGRX32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_RGB32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_XRGB32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_RGBX32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_HSV32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_ARGB32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_RGBA32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_ABGR32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_BGRA32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_GREY,    .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 
 		/* YUV packed formats */
-		{ .format = V4L2_PIX_FMT_YUYV,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_YVYU,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_UYVY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_VYUY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YUYV,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YVYU,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_UYVY,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_VYUY,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
 
 		/* YUV planar formats */
-		{ .format = V4L2_PIX_FMT_NV12,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_NV21,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_NV16,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_NV61,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_NV24,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_NV42,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-
-		{ .format = V4L2_PIX_FMT_YUV410,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
-		{ .format = V4L2_PIX_FMT_YVU410,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
-		{ .format = V4L2_PIX_FMT_YUV411P, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_YUV420,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_YVU420,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_YUV422P, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_NV12,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_NV21,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_NV16,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_NV61,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_NV24,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_NV42,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+
+		{ .format = V4L2_PIX_FMT_YUV410,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
+		{ .format = V4L2_PIX_FMT_YVU410,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
+		{ .format = V4L2_PIX_FMT_YUV411P, .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YUV420,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_YVU420,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_YUV422P, .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
 
 		/* YUV planar formats, non contiguous variant */
-		{ .format = V4L2_PIX_FMT_YUV420M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_YVU420M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_YUV422M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_YVU422M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_YUV444M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_YVU444M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
-
-		{ .format = V4L2_PIX_FMT_NV12M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_NV21M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_NV16M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_NV61M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YUV420M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_YVU420M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_YUV422M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YVU422M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YUV444M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YVU444M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
+
+		{ .format = V4L2_PIX_FMT_NV12M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_NV21M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_NV16M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_NV61M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
 
 		/* Bayer RGB formats */
-		{ .format = V4L2_PIX_FMT_SBGGR8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGBRG8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGRBG8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SRGGB8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SBGGR10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGBRG10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGRBG10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SRGGB10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SBGGR10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGBRG10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGRBG10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SRGGB10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SBGGR10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGBRG10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGRBG10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SRGGB10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SBGGR12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGBRG12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGRBG12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SRGGB12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SBGGR8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGBRG8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGRBG8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SRGGB8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SBGGR10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGBRG10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGRBG10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SRGGB10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SBGGR10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGBRG10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGRBG10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SRGGB10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SBGGR10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGBRG10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGRBG10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SRGGB10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SBGGR12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGBRG12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGRBG12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SRGGB12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 	};
 	unsigned int i;
 
@@ -317,6 +317,42 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
 }
 EXPORT_SYMBOL(v4l2_format_info);
 
+bool v4l2_is_format_rgb(u32 format)
+{
+	const struct v4l2_format_info *f;
+
+	f = v4l2_format_info(format);
+	if (f && f->pix_enc == V4L2_ENC_RGB)
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL(v4l2_is_format_rgb);
+
+bool v4l2_is_format_yuv(u32 format)
+{
+	const struct v4l2_format_info *f;
+
+	f = v4l2_format_info(format);
+	if (f && f->pix_enc == V4L2_ENC_YUV)
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL(v4l2_is_format_yuv);
+
+bool v4l2_is_format_bayer(u32 format)
+{
+	const struct v4l2_format_info *f;
+
+	f = v4l2_format_info(format);
+	if (f && f->pix_enc == V4L2_ENC_BAYER)
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL(v4l2_is_format_bayer);
+
 static inline unsigned int v4l2_format_block_width(const struct v4l2_format_info *info, int plane)
 {
 	if (!info->block_w[plane])
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index c070d8ae11e5..27041cf2b818 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -456,9 +456,25 @@ int v4l2_s_parm_cap(struct video_device *vdev,
 
 /* Pixel format and FourCC helpers */
 
+/**
+ * enum v4l2_pixel_encoding - specifies the pixel encoding value
+ *
+ * @V4L2_ENC_UNKNOWN:	Pixel encoding is unknown/un-initialized
+ * @V4L2_ENC_YUV:	Pixel encoding is YUV
+ * @V4L2_ENC_RGB:	Pixel encoding is RGB
+ * @V4L2_ENC_BAYER:	Pixel encoding is Bayer
+ */
+enum v4l2_pixel_encoding {
+	@V4L2_ENC_UNKNOWN = 0,
+	V4L2_ENC_YUV = 1,
+	V4L2_ENC_RGB = 2,
+	V4L2_ENC_BAYER = 3,
+};
+
 /**
  * struct v4l2_format_info - information about a V4L2 format
  * @format: 4CC format identifier (V4L2_PIX_FMT_*)
+ * @pix_enc: Pixel format encoding (see enum v4l2_pixel_encoding above)
  * @mem_planes: Number of memory planes, which includes the alpha plane (1 to 4).
  * @comp_planes: Number of component planes, which includes the alpha plane (1 to 4).
  * @bpp: Array of per-plane bytes per pixel
@@ -469,6 +485,7 @@ int v4l2_s_parm_cap(struct video_device *vdev,
  */
 struct v4l2_format_info {
 	u32 format;
+	u8 pix_enc;
 	u8 mem_planes;
 	u8 comp_planes;
 	u8 bpp[4];
@@ -479,6 +496,9 @@ struct v4l2_format_info {
 };
 
 const struct v4l2_format_info *v4l2_format_info(u32 format);
+bool v4l2_is_format_rgb(u32 format);
+bool v4l2_is_format_yuv(u32 format);
+bool v4l2_is_format_bayer(u32 format);
 
 void v4l2_apply_frmsize_constraints(u32 *width, u32 *height,
 				    const struct v4l2_frmsize_stepwise *frmsize);
-- 
2.17.1

[Patch v2 19/21] media: v4l2-common: add pixel encoding support

[Benoit Parrot]

It is often useful to figure out if a pixel_format is either YUV or RGB
especially for driver who can perform the pixel encoding conversion.

Instead of having each driver implement its own "is_this_yuv/rgb"
function based on a restricted set of pixel value, it is better to do
this in centralized manner.

We therefore add a pix_enc member to the v4l2_format_info structure to
quickly identify the related pixel encoding.
And add helper function to find/check pixel encoding.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/v4l2-core/v4l2-common.c | 162 ++++++++++++++++----------
 include/media/v4l2-common.h           |  20 ++++
 2 files changed, 119 insertions(+), 63 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
index 62f7aa92ac29..474cdb5863f4 100644
--- a/drivers/media/v4l2-core/v4l2-common.c
+++ b/drivers/media/v4l2-core/v4l2-common.c
@@ -236,77 +236,77 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
 {
 	static const struct v4l2_format_info formats[] = {
 		/* RGB formats */
-		{ .format = V4L2_PIX_FMT_BGR24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_RGB24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_HSV24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_BGR32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_XBGR32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_BGRX32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_RGB32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_XRGB32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_RGBX32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_HSV32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_ARGB32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_RGBA32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_ABGR32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_BGRA32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_GREY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_BGR24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_RGB24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_HSV24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_BGR32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_XBGR32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_BGRX32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_RGB32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_XRGB32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_RGBX32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_HSV32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_ARGB32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_RGBA32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_ABGR32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_BGRA32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_GREY,    .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 
 		/* YUV packed formats */
-		{ .format = V4L2_PIX_FMT_YUYV,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_YVYU,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_UYVY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_VYUY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YUYV,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YVYU,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_UYVY,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_VYUY,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
 
 		/* YUV planar formats */
-		{ .format = V4L2_PIX_FMT_NV12,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_NV21,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_NV16,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_NV61,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_NV24,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_NV42,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-
-		{ .format = V4L2_PIX_FMT_YUV410,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
-		{ .format = V4L2_PIX_FMT_YVU410,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
-		{ .format = V4L2_PIX_FMT_YUV411P, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_YUV420,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_YVU420,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_YUV422P, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_NV12,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_NV21,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_NV16,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_NV61,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_NV24,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_NV42,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+
+		{ .format = V4L2_PIX_FMT_YUV410,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
+		{ .format = V4L2_PIX_FMT_YVU410,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
+		{ .format = V4L2_PIX_FMT_YUV411P, .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YUV420,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_YVU420,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_YUV422P, .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
 
 		/* YUV planar formats, non contiguous variant */
-		{ .format = V4L2_PIX_FMT_YUV420M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_YVU420M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_YUV422M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_YVU422M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_YUV444M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_YVU444M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
-
-		{ .format = V4L2_PIX_FMT_NV12M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_NV21M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
-		{ .format = V4L2_PIX_FMT_NV16M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_NV61M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YUV420M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_YVU420M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_YUV422M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YVU422M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YUV444M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_YVU444M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
+
+		{ .format = V4L2_PIX_FMT_NV12M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_NV21M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
+		{ .format = V4L2_PIX_FMT_NV16M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_NV61M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
 
 		/* Bayer RGB formats */
-		{ .format = V4L2_PIX_FMT_SBGGR8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGBRG8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGRBG8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SRGGB8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SBGGR10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGBRG10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGRBG10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SRGGB10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SBGGR10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGBRG10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGRBG10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SRGGB10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SBGGR10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGBRG10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGRBG10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SRGGB10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SBGGR12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGBRG12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SGRBG12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_SRGGB12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SBGGR8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGBRG8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGRBG8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SRGGB8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SBGGR10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGBRG10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGRBG10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SRGGB10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SBGGR10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGBRG10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGRBG10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SRGGB10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SBGGR10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGBRG10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGRBG10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SRGGB10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SBGGR12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGBRG12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SGRBG12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_SRGGB12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 	};
 	unsigned int i;
 
@@ -317,6 +317,42 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
 }
 EXPORT_SYMBOL(v4l2_format_info);
 
+bool v4l2_is_format_rgb(u32 format)
+{
+	const struct v4l2_format_info *f;
+
+	f = v4l2_format_info(format);
+	if (f && f->pix_enc == V4L2_ENC_RGB)
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL(v4l2_is_format_rgb);
+
+bool v4l2_is_format_yuv(u32 format)
+{
+	const struct v4l2_format_info *f;
+
+	f = v4l2_format_info(format);
+	if (f && f->pix_enc == V4L2_ENC_YUV)
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL(v4l2_is_format_yuv);
+
+bool v4l2_is_format_bayer(u32 format)
+{
+	const struct v4l2_format_info *f;
+
+	f = v4l2_format_info(format);
+	if (f && f->pix_enc == V4L2_ENC_BAYER)
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL(v4l2_is_format_bayer);
+
 static inline unsigned int v4l2_format_block_width(const struct v4l2_format_info *info, int plane)
 {
 	if (!info->block_w[plane])
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index c070d8ae11e5..27041cf2b818 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -456,9 +456,25 @@ int v4l2_s_parm_cap(struct video_device *vdev,
 
 /* Pixel format and FourCC helpers */
 
+/**
+ * enum v4l2_pixel_encoding - specifies the pixel encoding value
+ *
+ * @V4L2_ENC_UNKNOWN:	Pixel encoding is unknown/un-initialized
+ * @V4L2_ENC_YUV:	Pixel encoding is YUV
+ * @V4L2_ENC_RGB:	Pixel encoding is RGB
+ * @V4L2_ENC_BAYER:	Pixel encoding is Bayer
+ */
+enum v4l2_pixel_encoding {
+	@V4L2_ENC_UNKNOWN = 0,
+	V4L2_ENC_YUV = 1,
+	V4L2_ENC_RGB = 2,
+	V4L2_ENC_BAYER = 3,
+};
+
 /**
  * struct v4l2_format_info - information about a V4L2 format
  * @format: 4CC format identifier (V4L2_PIX_FMT_*)
+ * @pix_enc: Pixel format encoding (see enum v4l2_pixel_encoding above)
  * @mem_planes: Number of memory planes, which includes the alpha plane (1 to 4).
  * @comp_planes: Number of component planes, which includes the alpha plane (1 to 4).
  * @bpp: Array of per-plane bytes per pixel
@@ -469,6 +485,7 @@ int v4l2_s_parm_cap(struct video_device *vdev,
  */
 struct v4l2_format_info {
 	u32 format;
+	u8 pix_enc;
 	u8 mem_planes;
 	u8 comp_planes;
 	u8 bpp[4];
@@ -479,6 +496,9 @@ struct v4l2_format_info {
 };
 
 const struct v4l2_format_info *v4l2_format_info(u32 format);
+bool v4l2_is_format_rgb(u32 format);
+bool v4l2_is_format_yuv(u32 format);
+bool v4l2_is_format_bayer(u32 format);
 
 void v4l2_apply_frmsize_constraints(u32 *width, u32 *height,
 				    const struct v4l2_frmsize_stepwise *frmsize);
-- 
2.17.1

[Patch v2 20/21] media: v4l2-common: add RGB565 and RGB55 to v4l2_format_info

[Benoit Parrot]

Add RGB565 and RGB555 to the v4l2_format_info table.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/v4l2-core/v4l2-common.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
index 474cdb5863f4..e6bbd28db075 100644
--- a/drivers/media/v4l2-core/v4l2-common.c
+++ b/drivers/media/v4l2-core/v4l2-common.c
@@ -251,6 +251,8 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
 		{ .format = V4L2_PIX_FMT_ABGR32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 		{ .format = V4L2_PIX_FMT_BGRA32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 		{ .format = V4L2_PIX_FMT_GREY,    .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_RGB565,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_RGB555,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 
 		/* YUV packed formats */
 		{ .format = V4L2_PIX_FMT_YUYV,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-- 
2.17.1

[Patch v2 20/21] media: v4l2-common: add RGB565 and RGB55 to v4l2_format_info

[Benoit Parrot]

Add RGB565 and RGB555 to the v4l2_format_info table.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/v4l2-core/v4l2-common.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
index 474cdb5863f4..e6bbd28db075 100644
--- a/drivers/media/v4l2-core/v4l2-common.c
+++ b/drivers/media/v4l2-core/v4l2-common.c
@@ -251,6 +251,8 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
 		{ .format = V4L2_PIX_FMT_ABGR32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 		{ .format = V4L2_PIX_FMT_BGRA32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 		{ .format = V4L2_PIX_FMT_GREY,    .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_RGB565,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_RGB555,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 
 		/* YUV packed formats */
 		{ .format = V4L2_PIX_FMT_YUYV,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
-- 
2.17.1

[Patch v2 21/21] media: ti-vpe: vpe: don't rely on colorspace member for conversion

[Benoit Parrot]

Up to now VPE was relying on the colorspace value of struct v4l2_format
as an indication to perform color space conversion from YUV to RGB or
not.

Instead we should used the source/destination fourcc codes as a more
reliable indication to perform color space conversion or not.

To do so, we rework the csc module to use "struct v4l2_format *" as
parameters, and reorganize the coefficients tables in a more logical
way.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/csc.c | 220 +++++++++++++++++-----------
 drivers/media/platform/ti-vpe/csc.h |   4 +-
 drivers/media/platform/ti-vpe/vpe.c |  17 +--
 3 files changed, 144 insertions(+), 97 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/csc.c b/drivers/media/platform/ti-vpe/csc.c
index f0c45d187b5f..e2b5bee5e206 100644
--- a/drivers/media/platform/ti-vpe/csc.c
+++ b/drivers/media/platform/ti-vpe/csc.c
@@ -15,76 +15,96 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/videodev2.h>
+#include <media/v4l2-common.h>
 
 #include "csc.h"
 
 /*
- * 16 coefficients in the order:
+ * 12 coefficients in the order:
  * a0, b0, c0, a1, b1, c1, a2, b2, c2, d0, d1, d2
- * (we may need to pass non-default values from user space later on, we might
- * need to make the coefficient struct more easy to populate)
  */
-struct colorspace_coeffs {
-	u16	sd[12];
-	u16	hd[12];
+struct quantization {
+	u16	coeff[12];
 };
 
-/* VIDEO_RANGE: limited range, GRAPHICS_RANGE: full range */
-#define	CSC_COEFFS_VIDEO_RANGE_Y2R	0
-#define	CSC_COEFFS_GRAPHICS_RANGE_Y2R	1
-#define	CSC_COEFFS_VIDEO_RANGE_R2Y	2
-#define	CSC_COEFFS_GRAPHICS_RANGE_R2Y	3
+struct colorspace {
+	struct quantization limited;
+	struct quantization full;
+};
+
+struct encoding_direction {
+	struct colorspace r601;
+	struct colorspace r709;
+};
+
+struct csc_coeffs {
+	struct encoding_direction y2r;
+	struct encoding_direction r2y;
+};
 
 /* default colorspace coefficients */
-static struct colorspace_coeffs colorspace_coeffs[4] = {
-	[CSC_COEFFS_VIDEO_RANGE_Y2R] = {
-		{
-			/* SDTV */
-			0x0400, 0x0000, 0x057D, 0x0400, 0x1EA7, 0x1D35,
-			0x0400, 0x06EF, 0x1FFE, 0x0D40, 0x0210, 0x0C88,
-		},
-		{
-			/* HDTV */
-			0x0400, 0x0000, 0x0629, 0x0400, 0x1F45, 0x1E2B,
-			0x0400, 0x0742, 0x0000, 0x0CEC, 0x0148, 0x0C60,
-		},
-	},
-	[CSC_COEFFS_GRAPHICS_RANGE_Y2R] = {
-		{
-			/* SDTV */
-			0x04A8, 0x1FFE, 0x0662, 0x04A8, 0x1E6F, 0x1CBF,
-			0x04A8, 0x0812, 0x1FFF, 0x0C84, 0x0220, 0x0BAC,
+static struct csc_coeffs csc_coeffs = {
+	.y2r = {
+		.r601 = {
+			.limited = {
+				{	/* SDTV */
+				0x0400, 0x0000, 0x057D, 0x0400, 0x1EA7, 0x1D35,
+				0x0400, 0x06EF, 0x1FFE, 0x0D40, 0x0210, 0x0C88,
+				}
+			},
+			.full = {
+				{	/* SDTV */
+				0x04A8, 0x1FFE, 0x0662, 0x04A8, 0x1E6F, 0x1CBF,
+				0x04A8, 0x0812, 0x1FFF, 0x0C84, 0x0220, 0x0BAC,
+				}
+			},
 		},
-		{
-			/* HDTV */
-			0x04A8, 0x0000, 0x072C, 0x04A8, 0x1F26, 0x1DDE,
-			0x04A8, 0x0873, 0x0000, 0x0C20, 0x0134, 0x0B7C,
+		.r709 = {
+			.limited = {
+				{	/* HDTV */
+				0x0400, 0x0000, 0x0629, 0x0400, 0x1F45, 0x1E2B,
+				0x0400, 0x0742, 0x0000, 0x0CEC, 0x0148, 0x0C60,
+				}
+			},
+			.full = {
+				{	/* HDTV */
+				0x04A8, 0x0000, 0x072C, 0x04A8, 0x1F26, 0x1DDE,
+				0x04A8, 0x0873, 0x0000, 0x0C20, 0x0134, 0x0B7C,
+				}
+			},
 		},
 	},
-	[CSC_COEFFS_VIDEO_RANGE_R2Y] = {
-		{
-			/* SDTV */
-			0x0132, 0x0259, 0x0075, 0x1F50, 0x1EA5, 0x020B,
-			0x020B, 0x1E4A, 0x1FAB, 0x0000, 0x0200, 0x0200,
+	.r2y = {
+		.r601 = {
+			.limited = {
+				{	/* SDTV */
+				0x0132, 0x0259, 0x0075, 0x1F50, 0x1EA5, 0x020B,
+				0x020B, 0x1E4A, 0x1FAB, 0x0000, 0x0200, 0x0200,
+				}
+			},
+			.full = {
+				{	/* SDTV */
+				0x0107, 0x0204, 0x0064, 0x1F68, 0x1ED6, 0x01C2,
+				0x01C2, 0x1E87, 0x1FB7, 0x0040, 0x0200, 0x0200,
+				}
+			},
 		},
-		{
-			/* HDTV */
-			0x00DA, 0x02DC, 0x004A, 0x1F88, 0x1E6C, 0x020C,
-			0x020C, 0x1E24, 0x1FD0, 0x0000, 0x0200, 0x0200,
-		},
-	},
-	[CSC_COEFFS_GRAPHICS_RANGE_R2Y] = {
-		{
-			/* SDTV */
-			0x0107, 0x0204, 0x0064, 0x1F68, 0x1ED6, 0x01C2,
-			0x01C2, 0x1E87, 0x1FB7, 0x0040, 0x0200, 0x0200,
-		},
-		{
-			/* HDTV */
-			0x00bb, 0x0275, 0x003f, 0x1f99, 0x1ea5, 0x01c2,
-			0x01c2, 0x1e67, 0x1fd7, 0x0040, 0x0200, 0x0200,
+		.r709 = {
+			.limited = {
+				{	/* HDTV */
+				0x00DA, 0x02DC, 0x004A, 0x1F88, 0x1E6C, 0x020C,
+				0x020C, 0x1E24, 0x1FD0, 0x0000, 0x0200, 0x0200,
+				}
+			},
+			.full = {
+				{	/* HDTV */
+				0x00bb, 0x0275, 0x003f, 0x1f99, 0x1ea5, 0x01c2,
+				0x01c2, 0x1e67, 0x1fd7, 0x0040, 0x0200, 0x0200,
+				}
+			},
 		},
 	},
+
 };
 
 void csc_dump_regs(struct csc_data *csc)
@@ -117,46 +137,80 @@ EXPORT_SYMBOL(csc_set_coeff_bypass);
  * set the color space converter coefficient shadow register values
  */
 void csc_set_coeff(struct csc_data *csc, u32 *csc_reg0,
-		enum v4l2_colorspace src_colorspace,
-		enum v4l2_colorspace dst_colorspace)
+		   struct v4l2_format *src_fmt, struct v4l2_format *dst_fmt)
 {
 	u32 *csc_reg5 = csc_reg0 + 5;
 	u32 *shadow_csc = csc_reg0;
-	struct colorspace_coeffs *sd_hd_coeffs;
 	u16 *coeff, *end_coeff;
-	enum v4l2_colorspace yuv_colorspace;
-	int sel = 0;
-
-	/*
-	 * support only graphics data range(full range) for now, a control ioctl
-	 * would be nice here
-	 */
-	/* Y2R */
-	if (dst_colorspace == V4L2_COLORSPACE_SRGB &&
-			(src_colorspace == V4L2_COLORSPACE_SMPTE170M ||
-			src_colorspace == V4L2_COLORSPACE_REC709)) {
+	enum v4l2_ycbcr_encoding ycbcr_enc;
+	enum v4l2_quantization quantization;
+
+	if (v4l2_is_format_yuv(src_fmt->fmt.pix_mp.pixelformat) &&
+	    v4l2_is_format_rgb(dst_fmt->fmt.pix_mp.pixelformat)) {
+
 		/* Y2R */
-		sel = 1;
-		yuv_colorspace = src_colorspace;
-	} else if ((dst_colorspace == V4L2_COLORSPACE_SMPTE170M ||
-			dst_colorspace == V4L2_COLORSPACE_REC709) &&
-			src_colorspace == V4L2_COLORSPACE_SRGB) {
+		ycbcr_enc = src_fmt->fmt.pix_mp.ycbcr_enc;
+		quantization = src_fmt->fmt.pix_mp.quantization;
+
+		/*
+		 * These are not the standard default values but are
+		 * set this way for historical compatibility
+		 */
+		if (ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT)
+			ycbcr_enc = V4L2_YCBCR_ENC_601;
+
+		if (quantization == V4L2_QUANTIZATION_DEFAULT)
+			quantization = V4L2_QUANTIZATION_FULL_RANGE;
+
+		if (ycbcr_enc == V4L2_YCBCR_ENC_601) {
+			if (quantization == V4L2_QUANTIZATION_FULL_RANGE)
+				coeff = csc_coeffs.y2r.r601.full.coeff;
+			else
+				coeff = csc_coeffs.y2r.r601.limited.coeff;
+		} else if (ycbcr_enc == V4L2_YCBCR_ENC_709) {
+			if (quantization == V4L2_QUANTIZATION_FULL_RANGE)
+				coeff = csc_coeffs.y2r.r709.full.coeff;
+			else
+				coeff = csc_coeffs.y2r.r709.limited.coeff;
+		} else {
+			/* Should never reach this, but it keeps gcc happy */
+			coeff = csc_coeffs.y2r.r601.full.coeff;
+		}
+	} else if (v4l2_is_format_rgb(src_fmt->fmt.pix_mp.pixelformat) &&
+		   v4l2_is_format_yuv(dst_fmt->fmt.pix_mp.pixelformat)) {
 		/* R2Y */
-		sel = 3;
-		yuv_colorspace = dst_colorspace;
+		ycbcr_enc = dst_fmt->fmt.pix_mp.ycbcr_enc;
+		quantization = dst_fmt->fmt.pix_mp.quantization;
+
+		/*
+		 * These are not the standard default values but are
+		 * set this way for historical compatibility
+		 */
+		if (ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT)
+			ycbcr_enc = V4L2_YCBCR_ENC_601;
+
+		if (quantization == V4L2_QUANTIZATION_DEFAULT)
+			quantization = V4L2_QUANTIZATION_FULL_RANGE;
+
+		if (ycbcr_enc == V4L2_YCBCR_ENC_601) {
+			if (quantization == V4L2_QUANTIZATION_FULL_RANGE)
+				coeff = csc_coeffs.r2y.r601.full.coeff;
+			else
+				coeff = csc_coeffs.r2y.r601.limited.coeff;
+		} else if (ycbcr_enc == V4L2_YCBCR_ENC_709) {
+			if (quantization == V4L2_QUANTIZATION_FULL_RANGE)
+				coeff = csc_coeffs.r2y.r709.full.coeff;
+			else
+				coeff = csc_coeffs.r2y.r709.limited.coeff;
+		} else {
+			/* Should never reach this, but it keeps gcc happy */
+			coeff = csc_coeffs.y2r.r601.full.coeff;
+		}
 	} else {
 		*csc_reg5 |= CSC_BYPASS;
 		return;
 	}
 
-	sd_hd_coeffs = &colorspace_coeffs[sel];
-
-	/* select between SD or HD coefficients */
-	if (yuv_colorspace == V4L2_COLORSPACE_SMPTE170M)
-		coeff = sd_hd_coeffs->sd;
-	else
-		coeff = sd_hd_coeffs->hd;
-
 	end_coeff = coeff + 12;
 
 	for (; coeff < end_coeff; coeff += 2)
diff --git a/drivers/media/platform/ti-vpe/csc.h b/drivers/media/platform/ti-vpe/csc.h
index de9a58af2ca8..af2e86bccf57 100644
--- a/drivers/media/platform/ti-vpe/csc.h
+++ b/drivers/media/platform/ti-vpe/csc.h
@@ -58,8 +58,8 @@ struct csc_data {
 void csc_dump_regs(struct csc_data *csc);
 void csc_set_coeff_bypass(struct csc_data *csc, u32 *csc_reg5);
 void csc_set_coeff(struct csc_data *csc, u32 *csc_reg0,
-		enum v4l2_colorspace src_colorspace,
-		enum v4l2_colorspace dst_colorspace);
+		   struct v4l2_format *src_fmt, struct v4l2_format *dst_fmt);
+
 struct csc_data *csc_create(struct platform_device *pdev, const char *res_name);
 
 #endif
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 19b027c5478a..003db923c8a4 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -756,12 +756,10 @@ static void set_src_registers(struct vpe_ctx *ctx)
 static void set_dst_registers(struct vpe_ctx *ctx)
 {
 	struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
-	enum v4l2_colorspace clrspc =
-			ctx->q_data[Q_DATA_DST].format.fmt.pix_mp.colorspace;
 	struct vpe_fmt *fmt = ctx->q_data[Q_DATA_DST].fmt;
 	u32 val = 0;
 
-	if (clrspc == V4L2_COLORSPACE_SRGB) {
+	if (v4l2_is_format_rgb(fmt->fourcc)) {
 		val |= VPE_RGB_OUT_SELECT;
 		vpdma_set_bg_color(ctx->dev->vpdma,
 			(struct vpdma_data_format *)fmt->vpdma_fmt[0], 0xff);
@@ -865,14 +863,12 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
 	unsigned int dst_w = d_q_data->c_rect.width;
 	unsigned int dst_h = d_q_data->c_rect.height;
 	struct v4l2_pix_format_mplane *spix;
-	struct v4l2_pix_format_mplane *dpix;
 	size_t mv_buf_size;
 	int ret;
 
 	ctx->sequence = 0;
 	ctx->field = V4L2_FIELD_TOP;
 	spix = &s_q_data->format.fmt.pix_mp;
-	dpix = &d_q_data->format.fmt.pix_mp;
 
 	if ((s_q_data->flags & Q_IS_INTERLACED) &&
 			!(d_q_data->flags & Q_IS_INTERLACED)) {
@@ -909,7 +905,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
 	set_dei_regs(ctx);
 
 	csc_set_coeff(ctx->dev->csc, &mmr_adb->csc_regs[0],
-		      spix->colorspace, dpix->colorspace);
+		      &s_q_data->format, &d_q_data->format);
 
 	sc_set_hs_coeffs(ctx->dev->sc, ctx->sc_coeff_h.addr, src_w, dst_w);
 	sc_set_vs_coeffs(ctx->dev->sc, ctx->sc_coeff_v.addr, src_h, dst_h);
@@ -1287,7 +1283,7 @@ static void device_run(void *priv)
 	if (ctx->deinterlacing)
 		add_out_dtd(ctx, VPE_PORT_MV_OUT);
 
-	if (d_q_data->format.fmt.pix_mp.colorspace == V4L2_COLORSPACE_SRGB) {
+	if (v4l2_is_format_rgb(d_q_data->fmt->fourcc)) {
 		add_out_dtd(ctx, VPE_PORT_RGB_OUT);
 	} else {
 		add_out_dtd(ctx, VPE_PORT_LUMA_OUT);
@@ -1329,7 +1325,7 @@ static void device_run(void *priv)
 	}
 
 	/* sync on channel control descriptors for output ports */
-	if (d_q_data->format.fmt.pix_mp.colorspace == V4L2_COLORSPACE_SRGB) {
+	if (v4l2_is_format_rgb(d_q_data->fmt->fourcc)) {
 		vpdma_add_sync_on_channel_ctd(&ctx->desc_list,
 			VPE_CHAN_RGB_OUT);
 	} else {
@@ -1668,10 +1664,7 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 		height = pix->height;
 
 	if (!pix->colorspace) {
-		if (fmt->fourcc == V4L2_PIX_FMT_RGB24 ||
-				fmt->fourcc == V4L2_PIX_FMT_BGR24 ||
-				fmt->fourcc == V4L2_PIX_FMT_RGB32 ||
-				fmt->fourcc == V4L2_PIX_FMT_BGR32) {
+		if (v4l2_is_format_rgb(fmt->fourcc)) {
 			pix->colorspace = V4L2_COLORSPACE_SRGB;
 		} else {
 			if (height > 1280)	/* HD */
-- 
2.17.1

[Patch v2 21/21] media: ti-vpe: vpe: don't rely on colorspace member for conversion

[Benoit Parrot]

Up to now VPE was relying on the colorspace value of struct v4l2_format
as an indication to perform color space conversion from YUV to RGB or
not.

Instead we should used the source/destination fourcc codes as a more
reliable indication to perform color space conversion or not.

To do so, we rework the csc module to use "struct v4l2_format *" as
parameters, and reorganize the coefficients tables in a more logical
way.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/csc.c | 220 +++++++++++++++++-----------
 drivers/media/platform/ti-vpe/csc.h |   4 +-
 drivers/media/platform/ti-vpe/vpe.c |  17 +--
 3 files changed, 144 insertions(+), 97 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/csc.c b/drivers/media/platform/ti-vpe/csc.c
index f0c45d187b5f..e2b5bee5e206 100644
--- a/drivers/media/platform/ti-vpe/csc.c
+++ b/drivers/media/platform/ti-vpe/csc.c
@@ -15,76 +15,96 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/videodev2.h>
+#include <media/v4l2-common.h>
 
 #include "csc.h"
 
 /*
- * 16 coefficients in the order:
+ * 12 coefficients in the order:
  * a0, b0, c0, a1, b1, c1, a2, b2, c2, d0, d1, d2
- * (we may need to pass non-default values from user space later on, we might
- * need to make the coefficient struct more easy to populate)
  */
-struct colorspace_coeffs {
-	u16	sd[12];
-	u16	hd[12];
+struct quantization {
+	u16	coeff[12];
 };
 
-/* VIDEO_RANGE: limited range, GRAPHICS_RANGE: full range */
-#define	CSC_COEFFS_VIDEO_RANGE_Y2R	0
-#define	CSC_COEFFS_GRAPHICS_RANGE_Y2R	1
-#define	CSC_COEFFS_VIDEO_RANGE_R2Y	2
-#define	CSC_COEFFS_GRAPHICS_RANGE_R2Y	3
+struct colorspace {
+	struct quantization limited;
+	struct quantization full;
+};
+
+struct encoding_direction {
+	struct colorspace r601;
+	struct colorspace r709;
+};
+
+struct csc_coeffs {
+	struct encoding_direction y2r;
+	struct encoding_direction r2y;
+};
 
 /* default colorspace coefficients */
-static struct colorspace_coeffs colorspace_coeffs[4] = {
-	[CSC_COEFFS_VIDEO_RANGE_Y2R] = {
-		{
-			/* SDTV */
-			0x0400, 0x0000, 0x057D, 0x0400, 0x1EA7, 0x1D35,
-			0x0400, 0x06EF, 0x1FFE, 0x0D40, 0x0210, 0x0C88,
-		},
-		{
-			/* HDTV */
-			0x0400, 0x0000, 0x0629, 0x0400, 0x1F45, 0x1E2B,
-			0x0400, 0x0742, 0x0000, 0x0CEC, 0x0148, 0x0C60,
-		},
-	},
-	[CSC_COEFFS_GRAPHICS_RANGE_Y2R] = {
-		{
-			/* SDTV */
-			0x04A8, 0x1FFE, 0x0662, 0x04A8, 0x1E6F, 0x1CBF,
-			0x04A8, 0x0812, 0x1FFF, 0x0C84, 0x0220, 0x0BAC,
+static struct csc_coeffs csc_coeffs = {
+	.y2r = {
+		.r601 = {
+			.limited = {
+				{	/* SDTV */
+				0x0400, 0x0000, 0x057D, 0x0400, 0x1EA7, 0x1D35,
+				0x0400, 0x06EF, 0x1FFE, 0x0D40, 0x0210, 0x0C88,
+				}
+			},
+			.full = {
+				{	/* SDTV */
+				0x04A8, 0x1FFE, 0x0662, 0x04A8, 0x1E6F, 0x1CBF,
+				0x04A8, 0x0812, 0x1FFF, 0x0C84, 0x0220, 0x0BAC,
+				}
+			},
 		},
-		{
-			/* HDTV */
-			0x04A8, 0x0000, 0x072C, 0x04A8, 0x1F26, 0x1DDE,
-			0x04A8, 0x0873, 0x0000, 0x0C20, 0x0134, 0x0B7C,
+		.r709 = {
+			.limited = {
+				{	/* HDTV */
+				0x0400, 0x0000, 0x0629, 0x0400, 0x1F45, 0x1E2B,
+				0x0400, 0x0742, 0x0000, 0x0CEC, 0x0148, 0x0C60,
+				}
+			},
+			.full = {
+				{	/* HDTV */
+				0x04A8, 0x0000, 0x072C, 0x04A8, 0x1F26, 0x1DDE,
+				0x04A8, 0x0873, 0x0000, 0x0C20, 0x0134, 0x0B7C,
+				}
+			},
 		},
 	},
-	[CSC_COEFFS_VIDEO_RANGE_R2Y] = {
-		{
-			/* SDTV */
-			0x0132, 0x0259, 0x0075, 0x1F50, 0x1EA5, 0x020B,
-			0x020B, 0x1E4A, 0x1FAB, 0x0000, 0x0200, 0x0200,
+	.r2y = {
+		.r601 = {
+			.limited = {
+				{	/* SDTV */
+				0x0132, 0x0259, 0x0075, 0x1F50, 0x1EA5, 0x020B,
+				0x020B, 0x1E4A, 0x1FAB, 0x0000, 0x0200, 0x0200,
+				}
+			},
+			.full = {
+				{	/* SDTV */
+				0x0107, 0x0204, 0x0064, 0x1F68, 0x1ED6, 0x01C2,
+				0x01C2, 0x1E87, 0x1FB7, 0x0040, 0x0200, 0x0200,
+				}
+			},
 		},
-		{
-			/* HDTV */
-			0x00DA, 0x02DC, 0x004A, 0x1F88, 0x1E6C, 0x020C,
-			0x020C, 0x1E24, 0x1FD0, 0x0000, 0x0200, 0x0200,
-		},
-	},
-	[CSC_COEFFS_GRAPHICS_RANGE_R2Y] = {
-		{
-			/* SDTV */
-			0x0107, 0x0204, 0x0064, 0x1F68, 0x1ED6, 0x01C2,
-			0x01C2, 0x1E87, 0x1FB7, 0x0040, 0x0200, 0x0200,
-		},
-		{
-			/* HDTV */
-			0x00bb, 0x0275, 0x003f, 0x1f99, 0x1ea5, 0x01c2,
-			0x01c2, 0x1e67, 0x1fd7, 0x0040, 0x0200, 0x0200,
+		.r709 = {
+			.limited = {
+				{	/* HDTV */
+				0x00DA, 0x02DC, 0x004A, 0x1F88, 0x1E6C, 0x020C,
+				0x020C, 0x1E24, 0x1FD0, 0x0000, 0x0200, 0x0200,
+				}
+			},
+			.full = {
+				{	/* HDTV */
+				0x00bb, 0x0275, 0x003f, 0x1f99, 0x1ea5, 0x01c2,
+				0x01c2, 0x1e67, 0x1fd7, 0x0040, 0x0200, 0x0200,
+				}
+			},
 		},
 	},
+
 };
 
 void csc_dump_regs(struct csc_data *csc)
@@ -117,46 +137,80 @@ EXPORT_SYMBOL(csc_set_coeff_bypass);
  * set the color space converter coefficient shadow register values
  */
 void csc_set_coeff(struct csc_data *csc, u32 *csc_reg0,
-		enum v4l2_colorspace src_colorspace,
-		enum v4l2_colorspace dst_colorspace)
+		   struct v4l2_format *src_fmt, struct v4l2_format *dst_fmt)
 {
 	u32 *csc_reg5 = csc_reg0 + 5;
 	u32 *shadow_csc = csc_reg0;
-	struct colorspace_coeffs *sd_hd_coeffs;
 	u16 *coeff, *end_coeff;
-	enum v4l2_colorspace yuv_colorspace;
-	int sel = 0;
-
-	/*
-	 * support only graphics data range(full range) for now, a control ioctl
-	 * would be nice here
-	 */
-	/* Y2R */
-	if (dst_colorspace == V4L2_COLORSPACE_SRGB &&
-			(src_colorspace == V4L2_COLORSPACE_SMPTE170M ||
-			src_colorspace == V4L2_COLORSPACE_REC709)) {
+	enum v4l2_ycbcr_encoding ycbcr_enc;
+	enum v4l2_quantization quantization;
+
+	if (v4l2_is_format_yuv(src_fmt->fmt.pix_mp.pixelformat) &&
+	    v4l2_is_format_rgb(dst_fmt->fmt.pix_mp.pixelformat)) {
+
 		/* Y2R */
-		sel = 1;
-		yuv_colorspace = src_colorspace;
-	} else if ((dst_colorspace == V4L2_COLORSPACE_SMPTE170M ||
-			dst_colorspace == V4L2_COLORSPACE_REC709) &&
-			src_colorspace == V4L2_COLORSPACE_SRGB) {
+		ycbcr_enc = src_fmt->fmt.pix_mp.ycbcr_enc;
+		quantization = src_fmt->fmt.pix_mp.quantization;
+
+		/*
+		 * These are not the standard default values but are
+		 * set this way for historical compatibility
+		 */
+		if (ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT)
+			ycbcr_enc = V4L2_YCBCR_ENC_601;
+
+		if (quantization == V4L2_QUANTIZATION_DEFAULT)
+			quantization = V4L2_QUANTIZATION_FULL_RANGE;
+
+		if (ycbcr_enc == V4L2_YCBCR_ENC_601) {
+			if (quantization == V4L2_QUANTIZATION_FULL_RANGE)
+				coeff = csc_coeffs.y2r.r601.full.coeff;
+			else
+				coeff = csc_coeffs.y2r.r601.limited.coeff;
+		} else if (ycbcr_enc == V4L2_YCBCR_ENC_709) {
+			if (quantization == V4L2_QUANTIZATION_FULL_RANGE)
+				coeff = csc_coeffs.y2r.r709.full.coeff;
+			else
+				coeff = csc_coeffs.y2r.r709.limited.coeff;
+		} else {
+			/* Should never reach this, but it keeps gcc happy */
+			coeff = csc_coeffs.y2r.r601.full.coeff;
+		}
+	} else if (v4l2_is_format_rgb(src_fmt->fmt.pix_mp.pixelformat) &&
+		   v4l2_is_format_yuv(dst_fmt->fmt.pix_mp.pixelformat)) {
 		/* R2Y */
-		sel = 3;
-		yuv_colorspace = dst_colorspace;
+		ycbcr_enc = dst_fmt->fmt.pix_mp.ycbcr_enc;
+		quantization = dst_fmt->fmt.pix_mp.quantization;
+
+		/*
+		 * These are not the standard default values but are
+		 * set this way for historical compatibility
+		 */
+		if (ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT)
+			ycbcr_enc = V4L2_YCBCR_ENC_601;
+
+		if (quantization == V4L2_QUANTIZATION_DEFAULT)
+			quantization = V4L2_QUANTIZATION_FULL_RANGE;
+
+		if (ycbcr_enc == V4L2_YCBCR_ENC_601) {
+			if (quantization == V4L2_QUANTIZATION_FULL_RANGE)
+				coeff = csc_coeffs.r2y.r601.full.coeff;
+			else
+				coeff = csc_coeffs.r2y.r601.limited.coeff;
+		} else if (ycbcr_enc == V4L2_YCBCR_ENC_709) {
+			if (quantization == V4L2_QUANTIZATION_FULL_RANGE)
+				coeff = csc_coeffs.r2y.r709.full.coeff;
+			else
+				coeff = csc_coeffs.r2y.r709.limited.coeff;
+		} else {
+			/* Should never reach this, but it keeps gcc happy */
+			coeff = csc_coeffs.y2r.r601.full.coeff;
+		}
 	} else {
 		*csc_reg5 |= CSC_BYPASS;
 		return;
 	}
 
-	sd_hd_coeffs = &colorspace_coeffs[sel];
-
-	/* select between SD or HD coefficients */
-	if (yuv_colorspace == V4L2_COLORSPACE_SMPTE170M)
-		coeff = sd_hd_coeffs->sd;
-	else
-		coeff = sd_hd_coeffs->hd;
-
 	end_coeff = coeff + 12;
 
 	for (; coeff < end_coeff; coeff += 2)
diff --git a/drivers/media/platform/ti-vpe/csc.h b/drivers/media/platform/ti-vpe/csc.h
index de9a58af2ca8..af2e86bccf57 100644
--- a/drivers/media/platform/ti-vpe/csc.h
+++ b/drivers/media/platform/ti-vpe/csc.h
@@ -58,8 +58,8 @@ struct csc_data {
 void csc_dump_regs(struct csc_data *csc);
 void csc_set_coeff_bypass(struct csc_data *csc, u32 *csc_reg5);
 void csc_set_coeff(struct csc_data *csc, u32 *csc_reg0,
-		enum v4l2_colorspace src_colorspace,
-		enum v4l2_colorspace dst_colorspace);
+		   struct v4l2_format *src_fmt, struct v4l2_format *dst_fmt);
+
 struct csc_data *csc_create(struct platform_device *pdev, const char *res_name);
 
 #endif
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 19b027c5478a..003db923c8a4 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -756,12 +756,10 @@ static void set_src_registers(struct vpe_ctx *ctx)
 static void set_dst_registers(struct vpe_ctx *ctx)
 {
 	struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
-	enum v4l2_colorspace clrspc =
-			ctx->q_data[Q_DATA_DST].format.fmt.pix_mp.colorspace;
 	struct vpe_fmt *fmt = ctx->q_data[Q_DATA_DST].fmt;
 	u32 val = 0;
 
-	if (clrspc == V4L2_COLORSPACE_SRGB) {
+	if (v4l2_is_format_rgb(fmt->fourcc)) {
 		val |= VPE_RGB_OUT_SELECT;
 		vpdma_set_bg_color(ctx->dev->vpdma,
 			(struct vpdma_data_format *)fmt->vpdma_fmt[0], 0xff);
@@ -865,14 +863,12 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
 	unsigned int dst_w = d_q_data->c_rect.width;
 	unsigned int dst_h = d_q_data->c_rect.height;
 	struct v4l2_pix_format_mplane *spix;
-	struct v4l2_pix_format_mplane *dpix;
 	size_t mv_buf_size;
 	int ret;
 
 	ctx->sequence = 0;
 	ctx->field = V4L2_FIELD_TOP;
 	spix = &s_q_data->format.fmt.pix_mp;
-	dpix = &d_q_data->format.fmt.pix_mp;
 
 	if ((s_q_data->flags & Q_IS_INTERLACED) &&
 			!(d_q_data->flags & Q_IS_INTERLACED)) {
@@ -909,7 +905,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
 	set_dei_regs(ctx);
 
 	csc_set_coeff(ctx->dev->csc, &mmr_adb->csc_regs[0],
-		      spix->colorspace, dpix->colorspace);
+		      &s_q_data->format, &d_q_data->format);
 
 	sc_set_hs_coeffs(ctx->dev->sc, ctx->sc_coeff_h.addr, src_w, dst_w);
 	sc_set_vs_coeffs(ctx->dev->sc, ctx->sc_coeff_v.addr, src_h, dst_h);
@@ -1287,7 +1283,7 @@ static void device_run(void *priv)
 	if (ctx->deinterlacing)
 		add_out_dtd(ctx, VPE_PORT_MV_OUT);
 
-	if (d_q_data->format.fmt.pix_mp.colorspace == V4L2_COLORSPACE_SRGB) {
+	if (v4l2_is_format_rgb(d_q_data->fmt->fourcc)) {
 		add_out_dtd(ctx, VPE_PORT_RGB_OUT);
 	} else {
 		add_out_dtd(ctx, VPE_PORT_LUMA_OUT);
@@ -1329,7 +1325,7 @@ static void device_run(void *priv)
 	}
 
 	/* sync on channel control descriptors for output ports */
-	if (d_q_data->format.fmt.pix_mp.colorspace == V4L2_COLORSPACE_SRGB) {
+	if (v4l2_is_format_rgb(d_q_data->fmt->fourcc)) {
 		vpdma_add_sync_on_channel_ctd(&ctx->desc_list,
 			VPE_CHAN_RGB_OUT);
 	} else {
@@ -1668,10 +1664,7 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 		height = pix->height;
 
 	if (!pix->colorspace) {
-		if (fmt->fourcc == V4L2_PIX_FMT_RGB24 ||
-				fmt->fourcc == V4L2_PIX_FMT_BGR24 ||
-				fmt->fourcc == V4L2_PIX_FMT_RGB32 ||
-				fmt->fourcc == V4L2_PIX_FMT_BGR32) {
+		if (v4l2_is_format_rgb(fmt->fourcc)) {
 			pix->colorspace = V4L2_COLORSPACE_SRGB;
 		} else {
 			if (height > 1280)	/* HD */
-- 
2.17.1

Re: [Patch v2 19/21] media: v4l2-common: add pixel encoding support

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 21239 bytes --]

Hi Benoit,

I love your patch! Perhaps something to improve:

[auto build test WARNING on linuxtv-media/master]
[cannot apply to v5.4-rc1 next-20191004]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Benoit-Parrot/media-vpe-maintenance/20191005-061051
base:   git://linuxtv.org/media_tree.git master
reproduce: make htmldocs

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   Warning: The Sphinx 'sphinx_rtd_theme' HTML theme was not found. Make sure you have the theme installed to produce pretty HTML output. Falling back to the default theme.
   WARNING: dot(1) not found, for better output quality install graphviz from http://www.graphviz.org
   WARNING: convert(1) not found, for SVG to PDF conversion install ImageMagick (https://www.imagemagick.org)
   include/linux/regulator/machine.h:196: warning: Function parameter or member 'max_uV_step' not described in 'regulation_constraints'
   include/linux/regulator/driver.h:223: warning: Function parameter or member 'resume' not described in 'regulator_ops'
   Error: Cannot open file drivers/dma-buf/reservation.c
   Error: Cannot open file drivers/dma-buf/reservation.c
   Error: Cannot open file drivers/dma-buf/reservation.c
   Error: Cannot open file include/linux/reservation.h
   Error: Cannot open file include/linux/reservation.h
   include/linux/spi/spi.h:190: warning: Function parameter or member 'driver_override' not described in 'spi_device'
   drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c:335: warning: Excess function parameter 'dev' description in 'amdgpu_gem_prime_export'
   drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c:336: warning: Excess function parameter 'dev' description in 'amdgpu_gem_prime_export'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:142: warning: Function parameter or member 'blockable' not described in 'amdgpu_mn_read_lock'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:347: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:348: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:494: warning: Function parameter or member 'start' not described in 'amdgpu_vm_pt_first_dfs'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'adev' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'vm' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'start' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'cursor' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'entry' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:823: warning: Function parameter or member 'level' not described in 'amdgpu_vm_bo_param'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'params' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'bo' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'level' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'pe' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'addr' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'count' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'incr' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'flags' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:2823: warning: Function parameter or member 'pasid' not described in 'amdgpu_vm_make_compute'
   drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:378: warning: Excess function parameter 'entry' description in 'amdgpu_irq_dispatch'
   drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:379: warning: Function parameter or member 'ih' not described in 'amdgpu_irq_dispatch'
   drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:379: warning: Excess function parameter 'entry' description in 'amdgpu_irq_dispatch'
   drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c:1: warning: no structured comments found
   drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1: warning: no structured comments found
   drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:1: warning: 'pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie' not found
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:132: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source @atomic_obj
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:238: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source gpu_info FW provided soc bounding box struct or 0 if not
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'atomic_obj' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'backlight_link' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'backlight_caps' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'freesync_module' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'fw_dmcu' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'dmcu_fw_version' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'soc_bounding_box' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1: warning: 'register_hpd_handlers' not found
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1: warning: 'dm_pflip_high_irq' not found
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1: warning: 'dm_crtc_high_irq' not found
   drivers/gpio/gpiolib-of.c:92: warning: Excess function parameter 'dev' description in 'of_gpio_need_valid_mask'
   include/linux/i2c.h:337: warning: Function parameter or member 'init_irq' not described in 'i2c_client'
   mm/util.c:1: warning: 'get_user_pages_fast' not found
   mm/slab.c:4215: warning: Function parameter or member 'objp' not described in '__ksize'
   drivers/usb/typec/bus.c:1: warning: 'typec_altmode_unregister_driver' not found
   drivers/usb/typec/bus.c:1: warning: 'typec_altmode_register_driver' not found
   drivers/usb/typec/class.c:1: warning: 'typec_altmode_unregister_notifier' not found
   drivers/usb/typec/class.c:1: warning: 'typec_altmode_register_notifier' not found
   include/linux/w1.h:277: warning: Function parameter or member 'of_match_table' not described in 'w1_family'
   fs/fs-writeback.c:913: warning: Excess function parameter 'nr_pages' description in 'cgroup_writeback_by_id'
   fs/direct-io.c:258: warning: Excess function parameter 'offset' description in 'dio_complete'
   fs/libfs.c:496: warning: Excess function parameter 'available' description in 'simple_write_end'
   fs/posix_acl.c:647: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:647: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:647: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode'
>> include/media/v4l2-common.h:472: warning: Enum value '@V4L2_ENC_UNKNOWN = 0' not described in enum 'v4l2_pixel_encoding'
>> include/media/v4l2-common.h:472: warning: Excess enum value 'V4L2_ENC_UNKNOWN' description in 'v4l2_pixel_encoding'
   kernel/dma/coherent.c:1: warning: no structured comments found
   include/linux/input/sparse-keymap.h:43: warning: Function parameter or member 'sw' not described in 'key_entry'
   lib/genalloc.c:1: warning: 'gen_pool_add_virt' not found
   lib/genalloc.c:1: warning: 'gen_pool_alloc' not found
   lib/genalloc.c:1: warning: 'gen_pool_free' not found
   lib/genalloc.c:1: warning: 'gen_pool_alloc_algo' not found
   include/linux/bitmap.h:341: warning: Function parameter or member 'nbits' not described in 'bitmap_or_equal'
   include/linux/rculist.h:374: warning: Excess function parameter 'cond' description in 'list_for_each_entry_rcu'
   include/linux/rculist.h:651: warning: Excess function parameter 'cond' description in 'hlist_for_each_entry_rcu'
   include/net/mac80211.h:4056: warning: Function parameter or member 'sta_set_txpwr' not described in 'ieee80211_ops'
   include/net/mac80211.h:2018: warning: Function parameter or member 'txpwr' not described in 'ieee80211_sta'
   include/net/cfg80211.h:1185: warning: Function parameter or member 'txpwr' not described in 'station_parameters'
   include/linux/skbuff.h:888: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'list' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'skb_mstamp_ns' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'head_frag' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'encapsulation' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'csum_valid' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member '__pkt_vlan_present_offset' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'vlan_present' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'csum_level' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff'
   include/net/sock.h:233: warning: Function parameter or member 'skc_addrpair' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_portpair' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_ipv6only' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_net_refcnt' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_v6_daddr' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_v6_rcv_saddr' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_cookie' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_listener' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_tw_dr' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_rcv_wnd' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_tw_rcv_nxt' not described in 'sock_common'
   include/net/sock.h:515: warning: Function parameter or member 'sk_rx_skb_cache' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_wq_raw' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'tcp_rtx_queue' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_tx_skb_cache' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_route_forced_caps' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_txtime_report_errors' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_validate_xmit_skb' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_bpf_storage' not described in 'sock'
   include/net/sock.h:2439: warning: Function parameter or member 'tcp_rx_skb_cache_key' not described in 'DECLARE_STATIC_KEY_FALSE'
   include/net/sock.h:2439: warning: Excess function parameter 'sk' description in 'DECLARE_STATIC_KEY_FALSE'
   include/net/sock.h:2439: warning: Excess function parameter 'skb' description in 'DECLARE_STATIC_KEY_FALSE'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'gso_partial_features' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'l3mdev_ops' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'xfrmdev_ops' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'tlsdev_ops' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'name_assign_type' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'ieee802154_ptr' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'mpls_ptr' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'xdp_prog' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'gro_flush_timeout' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'nf_hooks_ingress' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member '____cacheline_aligned_in_smp' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'qdisc_hash' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'xps_cpus_map' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'xps_rxqs_map' not described in 'net_device'
   include/linux/phylink.h:56: warning: Function parameter or member '__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising' not described in 'phylink_link_state'
   include/linux/phylink.h:56: warning: Function parameter or member '__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising' not described in 'phylink_link_state'
   drivers/net/phy/phylink.c:595: warning: Function parameter or member 'config' not described in 'phylink_create'
   drivers/net/phy/phylink.c:595: warning: Excess function parameter 'ndev' description in 'phylink_create'
   include/drm/drm_modeset_helper_vtables.h:1053: warning: Function parameter or member 'prepare_writeback_job' not described in 'drm_connector_helper_funcs'
   include/drm/drm_modeset_helper_vtables.h:1053: warning: Function parameter or member 'cleanup_writeback_job' not described in 'drm_connector_helper_funcs'
   include/drm/drm_atomic_state_helper.h:1: warning: no structured comments found
   include/drm/drm_gem_shmem_helper.h:87: warning: Function parameter or member 'madv' not described in 'drm_gem_shmem_object'
   include/drm/drm_gem_shmem_helper.h:87: warning: Function parameter or member 'madv_list' not described in 'drm_gem_shmem_object'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:158: warning: Enum value 'DPLL_ID_TGL_MGPLL5' not described in enum 'intel_dpll_id'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:158: warning: Enum value 'DPLL_ID_TGL_MGPLL6' not described in enum 'intel_dpll_id'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:158: warning: Excess enum value 'DPLL_ID_TGL_TCPLL5' description in 'intel_dpll_id'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:158: warning: Excess enum value 'DPLL_ID_TGL_TCPLL6' description in 'intel_dpll_id'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:342: warning: Function parameter or member 'wakeref' not described in 'intel_shared_dpll'
   Error: Cannot open file drivers/gpu/drm/i915/i915_gem_batch_pool.c
   Error: Cannot open file drivers/gpu/drm/i915/i915_gem_batch_pool.c
   Error: Cannot open file drivers/gpu/drm/i915/i915_gem_batch_pool.c
   drivers/gpu/drm/i915/i915_drv.h:1129: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source The OA context specific information.
   drivers/gpu/drm/i915/i915_drv.h:1143: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source State of the OA buffer.
   drivers/gpu/drm/i915/i915_drv.h:1154: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source Locks reads and writes to all head/tail state
   drivers/gpu/drm/i915/i915_drv.h:1176: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source One 'aging' tail pointer and one 'aged' tail pointer ready to
   drivers/gpu/drm/i915/i915_drv.h:1188: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source Index for the aged tail ready to read() data up to.
   drivers/gpu/drm/i915/i915_drv.h:1193: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source A monotonic timestamp for when the current aging tail pointer
   drivers/gpu/drm/i915/i915_drv.h:1199: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source Although we can always read back the head pointer register,
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'pinned_ctx' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'specific_ctx_id' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'specific_ctx_id_mask' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'poll_check_timer' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'poll_wq' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'pollin' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'periodic' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'period_exponent' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'oa_buffer' not described in 'i915_perf_stream'

vim +472 include/media/v4l2-common.h

   458	
   459	/**
   460	 * enum v4l2_pixel_encoding - specifies the pixel encoding value
   461	 *
   462	 * @V4L2_ENC_UNKNOWN:	Pixel encoding is unknown/un-initialized
   463	 * @V4L2_ENC_YUV:	Pixel encoding is YUV
   464	 * @V4L2_ENC_RGB:	Pixel encoding is RGB
   465	 * @V4L2_ENC_BAYER:	Pixel encoding is Bayer
   466	 */
   467	enum v4l2_pixel_encoding {
   468		@V4L2_ENC_UNKNOWN = 0,
   469		V4L2_ENC_YUV = 1,
   470		V4L2_ENC_RGB = 2,
   471		V4L2_ENC_BAYER = 3,
 > 472	};
   473	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 7278 bytes --]

Re: [Patch v2 19/21] media: v4l2-common: add pixel encoding support

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 21239 bytes --]

Hi Benoit,

I love your patch! Perhaps something to improve:

[auto build test WARNING on linuxtv-media/master]
[cannot apply to v5.4-rc1 next-20191004]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Benoit-Parrot/media-vpe-maintenance/20191005-061051
base:   git://linuxtv.org/media_tree.git master
reproduce: make htmldocs

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   Warning: The Sphinx 'sphinx_rtd_theme' HTML theme was not found. Make sure you have the theme installed to produce pretty HTML output. Falling back to the default theme.
   WARNING: dot(1) not found, for better output quality install graphviz from http://www.graphviz.org
   WARNING: convert(1) not found, for SVG to PDF conversion install ImageMagick (https://www.imagemagick.org)
   include/linux/regulator/machine.h:196: warning: Function parameter or member 'max_uV_step' not described in 'regulation_constraints'
   include/linux/regulator/driver.h:223: warning: Function parameter or member 'resume' not described in 'regulator_ops'
   Error: Cannot open file drivers/dma-buf/reservation.c
   Error: Cannot open file drivers/dma-buf/reservation.c
   Error: Cannot open file drivers/dma-buf/reservation.c
   Error: Cannot open file include/linux/reservation.h
   Error: Cannot open file include/linux/reservation.h
   include/linux/spi/spi.h:190: warning: Function parameter or member 'driver_override' not described in 'spi_device'
   drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c:335: warning: Excess function parameter 'dev' description in 'amdgpu_gem_prime_export'
   drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c:336: warning: Excess function parameter 'dev' description in 'amdgpu_gem_prime_export'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:142: warning: Function parameter or member 'blockable' not described in 'amdgpu_mn_read_lock'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:347: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:348: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:494: warning: Function parameter or member 'start' not described in 'amdgpu_vm_pt_first_dfs'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'adev' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'vm' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'start' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'cursor' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'entry' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:823: warning: Function parameter or member 'level' not described in 'amdgpu_vm_bo_param'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'params' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'bo' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'level' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'pe' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'addr' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'count' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'incr' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'flags' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:2823: warning: Function parameter or member 'pasid' not described in 'amdgpu_vm_make_compute'
   drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:378: warning: Excess function parameter 'entry' description in 'amdgpu_irq_dispatch'
   drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:379: warning: Function parameter or member 'ih' not described in 'amdgpu_irq_dispatch'
   drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:379: warning: Excess function parameter 'entry' description in 'amdgpu_irq_dispatch'
   drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c:1: warning: no structured comments found
   drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1: warning: no structured comments found
   drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:1: warning: 'pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie' not found
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:132: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source @atomic_obj
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:238: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source gpu_info FW provided soc bounding box struct or 0 if not
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'atomic_obj' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'backlight_link' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'backlight_caps' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'freesync_module' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'fw_dmcu' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'dmcu_fw_version' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'soc_bounding_box' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1: warning: 'register_hpd_handlers' not found
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1: warning: 'dm_pflip_high_irq' not found
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1: warning: 'dm_crtc_high_irq' not found
   drivers/gpio/gpiolib-of.c:92: warning: Excess function parameter 'dev' description in 'of_gpio_need_valid_mask'
   include/linux/i2c.h:337: warning: Function parameter or member 'init_irq' not described in 'i2c_client'
   mm/util.c:1: warning: 'get_user_pages_fast' not found
   mm/slab.c:4215: warning: Function parameter or member 'objp' not described in '__ksize'
   drivers/usb/typec/bus.c:1: warning: 'typec_altmode_unregister_driver' not found
   drivers/usb/typec/bus.c:1: warning: 'typec_altmode_register_driver' not found
   drivers/usb/typec/class.c:1: warning: 'typec_altmode_unregister_notifier' not found
   drivers/usb/typec/class.c:1: warning: 'typec_altmode_register_notifier' not found
   include/linux/w1.h:277: warning: Function parameter or member 'of_match_table' not described in 'w1_family'
   fs/fs-writeback.c:913: warning: Excess function parameter 'nr_pages' description in 'cgroup_writeback_by_id'
   fs/direct-io.c:258: warning: Excess function parameter 'offset' description in 'dio_complete'
   fs/libfs.c:496: warning: Excess function parameter 'available' description in 'simple_write_end'
   fs/posix_acl.c:647: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:647: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:647: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode'
>> include/media/v4l2-common.h:472: warning: Enum value '@V4L2_ENC_UNKNOWN = 0' not described in enum 'v4l2_pixel_encoding'
>> include/media/v4l2-common.h:472: warning: Excess enum value 'V4L2_ENC_UNKNOWN' description in 'v4l2_pixel_encoding'
   kernel/dma/coherent.c:1: warning: no structured comments found
   include/linux/input/sparse-keymap.h:43: warning: Function parameter or member 'sw' not described in 'key_entry'
   lib/genalloc.c:1: warning: 'gen_pool_add_virt' not found
   lib/genalloc.c:1: warning: 'gen_pool_alloc' not found
   lib/genalloc.c:1: warning: 'gen_pool_free' not found
   lib/genalloc.c:1: warning: 'gen_pool_alloc_algo' not found
   include/linux/bitmap.h:341: warning: Function parameter or member 'nbits' not described in 'bitmap_or_equal'
   include/linux/rculist.h:374: warning: Excess function parameter 'cond' description in 'list_for_each_entry_rcu'
   include/linux/rculist.h:651: warning: Excess function parameter 'cond' description in 'hlist_for_each_entry_rcu'
   include/net/mac80211.h:4056: warning: Function parameter or member 'sta_set_txpwr' not described in 'ieee80211_ops'
   include/net/mac80211.h:2018: warning: Function parameter or member 'txpwr' not described in 'ieee80211_sta'
   include/net/cfg80211.h:1185: warning: Function parameter or member 'txpwr' not described in 'station_parameters'
   include/linux/skbuff.h:888: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'list' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'skb_mstamp_ns' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'head_frag' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'encapsulation' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'csum_valid' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member '__pkt_vlan_present_offset' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'vlan_present' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'csum_level' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff'
   include/net/sock.h:233: warning: Function parameter or member 'skc_addrpair' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_portpair' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_ipv6only' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_net_refcnt' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_v6_daddr' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_v6_rcv_saddr' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_cookie' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_listener' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_tw_dr' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_rcv_wnd' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_tw_rcv_nxt' not described in 'sock_common'
   include/net/sock.h:515: warning: Function parameter or member 'sk_rx_skb_cache' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_wq_raw' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'tcp_rtx_queue' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_tx_skb_cache' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_route_forced_caps' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_txtime_report_errors' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_validate_xmit_skb' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_bpf_storage' not described in 'sock'
   include/net/sock.h:2439: warning: Function parameter or member 'tcp_rx_skb_cache_key' not described in 'DECLARE_STATIC_KEY_FALSE'
   include/net/sock.h:2439: warning: Excess function parameter 'sk' description in 'DECLARE_STATIC_KEY_FALSE'
   include/net/sock.h:2439: warning: Excess function parameter 'skb' description in 'DECLARE_STATIC_KEY_FALSE'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'gso_partial_features' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'l3mdev_ops' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'xfrmdev_ops' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'tlsdev_ops' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'name_assign_type' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'ieee802154_ptr' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'mpls_ptr' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'xdp_prog' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'gro_flush_timeout' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'nf_hooks_ingress' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member '____cacheline_aligned_in_smp' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'qdisc_hash' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'xps_cpus_map' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'xps_rxqs_map' not described in 'net_device'
   include/linux/phylink.h:56: warning: Function parameter or member '__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising' not described in 'phylink_link_state'
   include/linux/phylink.h:56: warning: Function parameter or member '__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising' not described in 'phylink_link_state'
   drivers/net/phy/phylink.c:595: warning: Function parameter or member 'config' not described in 'phylink_create'
   drivers/net/phy/phylink.c:595: warning: Excess function parameter 'ndev' description in 'phylink_create'
   include/drm/drm_modeset_helper_vtables.h:1053: warning: Function parameter or member 'prepare_writeback_job' not described in 'drm_connector_helper_funcs'
   include/drm/drm_modeset_helper_vtables.h:1053: warning: Function parameter or member 'cleanup_writeback_job' not described in 'drm_connector_helper_funcs'
   include/drm/drm_atomic_state_helper.h:1: warning: no structured comments found
   include/drm/drm_gem_shmem_helper.h:87: warning: Function parameter or member 'madv' not described in 'drm_gem_shmem_object'
   include/drm/drm_gem_shmem_helper.h:87: warning: Function parameter or member 'madv_list' not described in 'drm_gem_shmem_object'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:158: warning: Enum value 'DPLL_ID_TGL_MGPLL5' not described in enum 'intel_dpll_id'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:158: warning: Enum value 'DPLL_ID_TGL_MGPLL6' not described in enum 'intel_dpll_id'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:158: warning: Excess enum value 'DPLL_ID_TGL_TCPLL5' description in 'intel_dpll_id'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:158: warning: Excess enum value 'DPLL_ID_TGL_TCPLL6' description in 'intel_dpll_id'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:342: warning: Function parameter or member 'wakeref' not described in 'intel_shared_dpll'
   Error: Cannot open file drivers/gpu/drm/i915/i915_gem_batch_pool.c
   Error: Cannot open file drivers/gpu/drm/i915/i915_gem_batch_pool.c
   Error: Cannot open file drivers/gpu/drm/i915/i915_gem_batch_pool.c
   drivers/gpu/drm/i915/i915_drv.h:1129: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source The OA context specific information.
   drivers/gpu/drm/i915/i915_drv.h:1143: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source State of the OA buffer.
   drivers/gpu/drm/i915/i915_drv.h:1154: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source Locks reads and writes to all head/tail state
   drivers/gpu/drm/i915/i915_drv.h:1176: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source One 'aging' tail pointer and one 'aged' tail pointer ready to
   drivers/gpu/drm/i915/i915_drv.h:1188: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source Index for the aged tail ready to read() data up to.
   drivers/gpu/drm/i915/i915_drv.h:1193: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source A monotonic timestamp for when the current aging tail pointer
   drivers/gpu/drm/i915/i915_drv.h:1199: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source Although we can always read back the head pointer register,
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'pinned_ctx' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'specific_ctx_id' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'specific_ctx_id_mask' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'poll_check_timer' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'poll_wq' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'pollin' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'periodic' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'period_exponent' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'oa_buffer' not described in 'i915_perf_stream'

vim +472 include/media/v4l2-common.h

   458	
   459	/**
   460	 * enum v4l2_pixel_encoding - specifies the pixel encoding value
   461	 *
   462	 * @V4L2_ENC_UNKNOWN:	Pixel encoding is unknown/un-initialized
   463	 * @V4L2_ENC_YUV:	Pixel encoding is YUV
   464	 * @V4L2_ENC_RGB:	Pixel encoding is RGB
   465	 * @V4L2_ENC_BAYER:	Pixel encoding is Bayer
   466	 */
   467	enum v4l2_pixel_encoding {
   468		@V4L2_ENC_UNKNOWN = 0,
   469		V4L2_ENC_YUV = 1,
   470		V4L2_ENC_RGB = 2,
   471		V4L2_ENC_BAYER = 3,
 > 472	};
   473	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 7278 bytes --]

Re: [Patch v2 19/21] media: v4l2-common: add pixel encoding support

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 21448 bytes --]

Hi Benoit,

I love your patch! Perhaps something to improve:

[auto build test WARNING on linuxtv-media/master]
[cannot apply to v5.4-rc1 next-20191004]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Benoit-Parrot/media-vpe-maintenance/20191005-061051
base:   git://linuxtv.org/media_tree.git master
reproduce: make htmldocs

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   Warning: The Sphinx 'sphinx_rtd_theme' HTML theme was not found. Make sure you have the theme installed to produce pretty HTML output. Falling back to the default theme.
   WARNING: dot(1) not found, for better output quality install graphviz from http://www.graphviz.org
   WARNING: convert(1) not found, for SVG to PDF conversion install ImageMagick (https://www.imagemagick.org)
   include/linux/regulator/machine.h:196: warning: Function parameter or member 'max_uV_step' not described in 'regulation_constraints'
   include/linux/regulator/driver.h:223: warning: Function parameter or member 'resume' not described in 'regulator_ops'
   Error: Cannot open file drivers/dma-buf/reservation.c
   Error: Cannot open file drivers/dma-buf/reservation.c
   Error: Cannot open file drivers/dma-buf/reservation.c
   Error: Cannot open file include/linux/reservation.h
   Error: Cannot open file include/linux/reservation.h
   include/linux/spi/spi.h:190: warning: Function parameter or member 'driver_override' not described in 'spi_device'
   drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c:335: warning: Excess function parameter 'dev' description in 'amdgpu_gem_prime_export'
   drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c:336: warning: Excess function parameter 'dev' description in 'amdgpu_gem_prime_export'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:142: warning: Function parameter or member 'blockable' not described in 'amdgpu_mn_read_lock'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:347: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:348: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:494: warning: Function parameter or member 'start' not described in 'amdgpu_vm_pt_first_dfs'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'adev' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'vm' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'start' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'cursor' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:546: warning: Function parameter or member 'entry' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:823: warning: Function parameter or member 'level' not described in 'amdgpu_vm_bo_param'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'params' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'bo' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'level' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'pe' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'addr' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'count' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'incr' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1285: warning: Function parameter or member 'flags' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:2823: warning: Function parameter or member 'pasid' not described in 'amdgpu_vm_make_compute'
   drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:378: warning: Excess function parameter 'entry' description in 'amdgpu_irq_dispatch'
   drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:379: warning: Function parameter or member 'ih' not described in 'amdgpu_irq_dispatch'
   drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:379: warning: Excess function parameter 'entry' description in 'amdgpu_irq_dispatch'
   drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c:1: warning: no structured comments found
   drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1: warning: no structured comments found
   drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:1: warning: 'pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie' not found
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:132: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source @atomic_obj
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:238: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source gpu_info FW provided soc bounding box struct or 0 if not
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'atomic_obj' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'backlight_link' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'backlight_caps' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'freesync_module' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'fw_dmcu' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'dmcu_fw_version' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:243: warning: Function parameter or member 'soc_bounding_box' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1: warning: 'register_hpd_handlers' not found
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1: warning: 'dm_pflip_high_irq' not found
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1: warning: 'dm_crtc_high_irq' not found
   drivers/gpio/gpiolib-of.c:92: warning: Excess function parameter 'dev' description in 'of_gpio_need_valid_mask'
   include/linux/i2c.h:337: warning: Function parameter or member 'init_irq' not described in 'i2c_client'
   mm/util.c:1: warning: 'get_user_pages_fast' not found
   mm/slab.c:4215: warning: Function parameter or member 'objp' not described in '__ksize'
   drivers/usb/typec/bus.c:1: warning: 'typec_altmode_unregister_driver' not found
   drivers/usb/typec/bus.c:1: warning: 'typec_altmode_register_driver' not found
   drivers/usb/typec/class.c:1: warning: 'typec_altmode_unregister_notifier' not found
   drivers/usb/typec/class.c:1: warning: 'typec_altmode_register_notifier' not found
   include/linux/w1.h:277: warning: Function parameter or member 'of_match_table' not described in 'w1_family'
   fs/fs-writeback.c:913: warning: Excess function parameter 'nr_pages' description in 'cgroup_writeback_by_id'
   fs/direct-io.c:258: warning: Excess function parameter 'offset' description in 'dio_complete'
   fs/libfs.c:496: warning: Excess function parameter 'available' description in 'simple_write_end'
   fs/posix_acl.c:647: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:647: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:647: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode'
>> include/media/v4l2-common.h:472: warning: Enum value '@V4L2_ENC_UNKNOWN = 0' not described in enum 'v4l2_pixel_encoding'
>> include/media/v4l2-common.h:472: warning: Excess enum value 'V4L2_ENC_UNKNOWN' description in 'v4l2_pixel_encoding'
   kernel/dma/coherent.c:1: warning: no structured comments found
   include/linux/input/sparse-keymap.h:43: warning: Function parameter or member 'sw' not described in 'key_entry'
   lib/genalloc.c:1: warning: 'gen_pool_add_virt' not found
   lib/genalloc.c:1: warning: 'gen_pool_alloc' not found
   lib/genalloc.c:1: warning: 'gen_pool_free' not found
   lib/genalloc.c:1: warning: 'gen_pool_alloc_algo' not found
   include/linux/bitmap.h:341: warning: Function parameter or member 'nbits' not described in 'bitmap_or_equal'
   include/linux/rculist.h:374: warning: Excess function parameter 'cond' description in 'list_for_each_entry_rcu'
   include/linux/rculist.h:651: warning: Excess function parameter 'cond' description in 'hlist_for_each_entry_rcu'
   include/net/mac80211.h:4056: warning: Function parameter or member 'sta_set_txpwr' not described in 'ieee80211_ops'
   include/net/mac80211.h:2018: warning: Function parameter or member 'txpwr' not described in 'ieee80211_sta'
   include/net/cfg80211.h:1185: warning: Function parameter or member 'txpwr' not described in 'station_parameters'
   include/linux/skbuff.h:888: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'list' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'skb_mstamp_ns' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'head_frag' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'encapsulation' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'csum_valid' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member '__pkt_vlan_present_offset' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'vlan_present' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'csum_level' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff'
   include/linux/skbuff.h:888: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff'
   include/net/sock.h:233: warning: Function parameter or member 'skc_addrpair' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_portpair' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_ipv6only' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_net_refcnt' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_v6_daddr' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_v6_rcv_saddr' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_cookie' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_listener' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_tw_dr' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_rcv_wnd' not described in 'sock_common'
   include/net/sock.h:233: warning: Function parameter or member 'skc_tw_rcv_nxt' not described in 'sock_common'
   include/net/sock.h:515: warning: Function parameter or member 'sk_rx_skb_cache' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_wq_raw' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'tcp_rtx_queue' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_tx_skb_cache' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_route_forced_caps' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_txtime_report_errors' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_validate_xmit_skb' not described in 'sock'
   include/net/sock.h:515: warning: Function parameter or member 'sk_bpf_storage' not described in 'sock'
   include/net/sock.h:2439: warning: Function parameter or member 'tcp_rx_skb_cache_key' not described in 'DECLARE_STATIC_KEY_FALSE'
   include/net/sock.h:2439: warning: Excess function parameter 'sk' description in 'DECLARE_STATIC_KEY_FALSE'
   include/net/sock.h:2439: warning: Excess function parameter 'skb' description in 'DECLARE_STATIC_KEY_FALSE'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'gso_partial_features' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'l3mdev_ops' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'xfrmdev_ops' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'tlsdev_ops' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'name_assign_type' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'ieee802154_ptr' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'mpls_ptr' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'xdp_prog' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'gro_flush_timeout' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'nf_hooks_ingress' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member '____cacheline_aligned_in_smp' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'qdisc_hash' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'xps_cpus_map' not described in 'net_device'
   include/linux/netdevice.h:2053: warning: Function parameter or member 'xps_rxqs_map' not described in 'net_device'
   include/linux/phylink.h:56: warning: Function parameter or member '__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising' not described in 'phylink_link_state'
   include/linux/phylink.h:56: warning: Function parameter or member '__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising' not described in 'phylink_link_state'
   drivers/net/phy/phylink.c:595: warning: Function parameter or member 'config' not described in 'phylink_create'
   drivers/net/phy/phylink.c:595: warning: Excess function parameter 'ndev' description in 'phylink_create'
   include/drm/drm_modeset_helper_vtables.h:1053: warning: Function parameter or member 'prepare_writeback_job' not described in 'drm_connector_helper_funcs'
   include/drm/drm_modeset_helper_vtables.h:1053: warning: Function parameter or member 'cleanup_writeback_job' not described in 'drm_connector_helper_funcs'
   include/drm/drm_atomic_state_helper.h:1: warning: no structured comments found
   include/drm/drm_gem_shmem_helper.h:87: warning: Function parameter or member 'madv' not described in 'drm_gem_shmem_object'
   include/drm/drm_gem_shmem_helper.h:87: warning: Function parameter or member 'madv_list' not described in 'drm_gem_shmem_object'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:158: warning: Enum value 'DPLL_ID_TGL_MGPLL5' not described in enum 'intel_dpll_id'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:158: warning: Enum value 'DPLL_ID_TGL_MGPLL6' not described in enum 'intel_dpll_id'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:158: warning: Excess enum value 'DPLL_ID_TGL_TCPLL5' description in 'intel_dpll_id'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:158: warning: Excess enum value 'DPLL_ID_TGL_TCPLL6' description in 'intel_dpll_id'
   drivers/gpu/drm/i915/display/intel_dpll_mgr.h:342: warning: Function parameter or member 'wakeref' not described in 'intel_shared_dpll'
   Error: Cannot open file drivers/gpu/drm/i915/i915_gem_batch_pool.c
   Error: Cannot open file drivers/gpu/drm/i915/i915_gem_batch_pool.c
   Error: Cannot open file drivers/gpu/drm/i915/i915_gem_batch_pool.c
   drivers/gpu/drm/i915/i915_drv.h:1129: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source The OA context specific information.
   drivers/gpu/drm/i915/i915_drv.h:1143: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source State of the OA buffer.
   drivers/gpu/drm/i915/i915_drv.h:1154: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source Locks reads and writes to all head/tail state
   drivers/gpu/drm/i915/i915_drv.h:1176: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source One 'aging' tail pointer and one 'aged' tail pointer ready to
   drivers/gpu/drm/i915/i915_drv.h:1188: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source Index for the aged tail ready to read() data up to.
   drivers/gpu/drm/i915/i915_drv.h:1193: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source A monotonic timestamp for when the current aging tail pointer
   drivers/gpu/drm/i915/i915_drv.h:1199: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source Although we can always read back the head pointer register,
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'pinned_ctx' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'specific_ctx_id' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'specific_ctx_id_mask' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'poll_check_timer' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'poll_wq' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'pollin' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'periodic' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'period_exponent' not described in 'i915_perf_stream'
   drivers/gpu/drm/i915/i915_drv.h:1207: warning: Function parameter or member 'oa_buffer' not described in 'i915_perf_stream'

vim +472 include/media/v4l2-common.h

   458	
   459	/**
   460	 * enum v4l2_pixel_encoding - specifies the pixel encoding value
   461	 *
   462	 * @V4L2_ENC_UNKNOWN:	Pixel encoding is unknown/un-initialized
   463	 * @V4L2_ENC_YUV:	Pixel encoding is YUV
   464	 * @V4L2_ENC_RGB:	Pixel encoding is RGB
   465	 * @V4L2_ENC_BAYER:	Pixel encoding is Bayer
   466	 */
   467	enum v4l2_pixel_encoding {
   468		@V4L2_ENC_UNKNOWN = 0,
   469		V4L2_ENC_YUV = 1,
   470		V4L2_ENC_RGB = 2,
   471		V4L2_ENC_BAYER = 3,
 > 472	};
   473	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 7278 bytes --]

Re: [Patch v2 19/21] media: v4l2-common: add pixel encoding support

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1704 bytes --]

Hi Benoit,

I love your patch! Yet something to improve:

[auto build test ERROR on linuxtv-media/master]
[cannot apply to v5.4-rc1 next-20191004]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Benoit-Parrot/media-vpe-maintenance/20191005-061051
base:   git://linuxtv.org/media_tree.git master
config: x86_64-rhel (attached as .config)
compiler: gcc-7 (Debian 7.4.0-13) 7.4.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   In file included from drivers/media//usb/zr364xx/zr364xx.c:25:0:
>> include/media/v4l2-common.h:468:2: error: stray '@' in program
     @V4L2_ENC_UNKNOWN = 0,
     ^

vim +468 include/media/v4l2-common.h

   458	
   459	/**
   460	 * enum v4l2_pixel_encoding - specifies the pixel encoding value
   461	 *
   462	 * @V4L2_ENC_UNKNOWN:	Pixel encoding is unknown/un-initialized
   463	 * @V4L2_ENC_YUV:	Pixel encoding is YUV
   464	 * @V4L2_ENC_RGB:	Pixel encoding is RGB
   465	 * @V4L2_ENC_BAYER:	Pixel encoding is Bayer
   466	 */
   467	enum v4l2_pixel_encoding {
 > 468		@V4L2_ENC_UNKNOWN = 0,
   469		V4L2_ENC_YUV = 1,
   470		V4L2_ENC_RGB = 2,
   471		V4L2_ENC_BAYER = 3,
   472	};
   473	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 43796 bytes --]

Re: [Patch v2 19/21] media: v4l2-common: add pixel encoding support

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1704 bytes --]

Hi Benoit,

I love your patch! Yet something to improve:

[auto build test ERROR on linuxtv-media/master]
[cannot apply to v5.4-rc1 next-20191004]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Benoit-Parrot/media-vpe-maintenance/20191005-061051
base:   git://linuxtv.org/media_tree.git master
config: x86_64-rhel (attached as .config)
compiler: gcc-7 (Debian 7.4.0-13) 7.4.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   In file included from drivers/media//usb/zr364xx/zr364xx.c:25:0:
>> include/media/v4l2-common.h:468:2: error: stray '@' in program
     @V4L2_ENC_UNKNOWN = 0,
     ^

vim +468 include/media/v4l2-common.h

   458	
   459	/**
   460	 * enum v4l2_pixel_encoding - specifies the pixel encoding value
   461	 *
   462	 * @V4L2_ENC_UNKNOWN:	Pixel encoding is unknown/un-initialized
   463	 * @V4L2_ENC_YUV:	Pixel encoding is YUV
   464	 * @V4L2_ENC_RGB:	Pixel encoding is RGB
   465	 * @V4L2_ENC_BAYER:	Pixel encoding is Bayer
   466	 */
   467	enum v4l2_pixel_encoding {
 > 468		@V4L2_ENC_UNKNOWN = 0,
   469		V4L2_ENC_YUV = 1,
   470		V4L2_ENC_RGB = 2,
   471		V4L2_ENC_BAYER = 3,
   472	};
   473	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 43796 bytes --]

Re: [Patch v2 19/21] media: v4l2-common: add pixel encoding support

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1754 bytes --]

Hi Benoit,

I love your patch! Yet something to improve:

[auto build test ERROR on linuxtv-media/master]
[cannot apply to v5.4-rc1 next-20191004]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Benoit-Parrot/media-vpe-maintenance/20191005-061051
base:   git://linuxtv.org/media_tree.git master
config: x86_64-rhel (attached as .config)
compiler: gcc-7 (Debian 7.4.0-13) 7.4.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   In file included from drivers/media//usb/zr364xx/zr364xx.c:25:0:
>> include/media/v4l2-common.h:468:2: error: stray '@' in program
     @V4L2_ENC_UNKNOWN = 0,
     ^

vim +468 include/media/v4l2-common.h

   458	
   459	/**
   460	 * enum v4l2_pixel_encoding - specifies the pixel encoding value
   461	 *
   462	 * @V4L2_ENC_UNKNOWN:	Pixel encoding is unknown/un-initialized
   463	 * @V4L2_ENC_YUV:	Pixel encoding is YUV
   464	 * @V4L2_ENC_RGB:	Pixel encoding is RGB
   465	 * @V4L2_ENC_BAYER:	Pixel encoding is Bayer
   466	 */
   467	enum v4l2_pixel_encoding {
 > 468		@V4L2_ENC_UNKNOWN = 0,
   469		V4L2_ENC_YUV = 1,
   470		V4L2_ENC_RGB = 2,
   471		V4L2_ENC_BAYER = 3,
   472	};
   473	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 43796 bytes --]

Re: [Patch v2 16/21] media: ti-vpe: vpe: use standard struct instead of duplicating fields

[Hans Verkuil]

On 10/4/19 6:29 PM, Benoit Parrot wrote:
> For each queue we need to maintain resolutions, pixel format,
> bytesperline, sizeimage, colorspace, etc.
> 
> Instead of manually adding more entries in the vpe_q_data struct, it is
> better to just add a "struct v4l2_format" member and use that to store
> all needed information.
> 
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
>  drivers/media/platform/ti-vpe/vpe.c | 185 ++++++++++++++--------------
>  1 file changed, 91 insertions(+), 94 deletions(-)
> 
> diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
> index d7f8eb901475..5b1e9908fff2 100644
> --- a/drivers/media/platform/ti-vpe/vpe.c
> +++ b/drivers/media/platform/ti-vpe/vpe.c
> @@ -319,14 +319,9 @@ static struct vpe_fmt vpe_formats[] = {
>   * there is one source queue and one destination queue for each m2m context.
>   */
>  struct vpe_q_data {
> -	unsigned int		width;				/* frame width */
> -	unsigned int		height;				/* frame height */
> -	unsigned int		nplanes;			/* Current number of planes */
> -	unsigned int		bytesperline[VPE_MAX_PLANES];	/* bytes per line in memory */
> -	enum v4l2_colorspace	colorspace;
> -	enum v4l2_field		field;				/* supported field value */
> +	/* current v4l2 format info */
> +	struct v4l2_format	format;

Wouldn't it make more sense to use struct v4l2_pix_format_mplane? That avoid having to
use the '.fmt.pix_mp' sequence every time you need to access it.

Regards,

	Hans

>  	unsigned int		flags;
> -	unsigned int		sizeimage[VPE_MAX_PLANES];	/* image size in memory */
>  	struct v4l2_rect	c_rect;				/* crop/compose rectangle */
>  	struct vpe_fmt		*fmt;				/* format info */
>  };
> @@ -761,7 +756,8 @@ static void set_src_registers(struct vpe_ctx *ctx)
>  static void set_dst_registers(struct vpe_ctx *ctx)
>  {
>  	struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
> -	enum v4l2_colorspace clrspc = ctx->q_data[Q_DATA_DST].colorspace;
> +	enum v4l2_colorspace clrspc =
> +			ctx->q_data[Q_DATA_DST].format.fmt.pix_mp.colorspace;
>  	struct vpe_fmt *fmt = ctx->q_data[Q_DATA_DST].fmt;
>  	u32 val = 0;
>  
> @@ -868,11 +864,15 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
>  	unsigned int src_h = s_q_data->c_rect.height;
>  	unsigned int dst_w = d_q_data->c_rect.width;
>  	unsigned int dst_h = d_q_data->c_rect.height;
> +	struct v4l2_pix_format_mplane *spix;
> +	struct v4l2_pix_format_mplane *dpix;
>  	size_t mv_buf_size;
>  	int ret;
>  
>  	ctx->sequence = 0;
>  	ctx->field = V4L2_FIELD_TOP;
> +	spix = &s_q_data->format.fmt.pix_mp;
> +	dpix = &d_q_data->format.fmt.pix_mp;
>  
>  	if ((s_q_data->flags & Q_IS_INTERLACED) &&
>  			!(d_q_data->flags & Q_IS_INTERLACED)) {
> @@ -887,9 +887,9 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
>  		 * extra space will not be used by the de-interlacer, but will
>  		 * ensure that vpdma operates correctly
>  		 */
> -		bytes_per_line = ALIGN((s_q_data->width * mv->depth) >> 3,
> -					VPDMA_STRIDE_ALIGN);
> -		mv_buf_size = bytes_per_line * s_q_data->height;
> +		bytes_per_line = ALIGN((spix->width * mv->depth) >> 3,
> +				       VPDMA_STRIDE_ALIGN);
> +		mv_buf_size = bytes_per_line * spix->height;
>  
>  		ctx->deinterlacing = true;
>  		src_h <<= 1;
> @@ -909,7 +909,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
>  	set_dei_regs(ctx);
>  
>  	csc_set_coeff(ctx->dev->csc, &mmr_adb->csc_regs[0],
> -		s_q_data->colorspace, d_q_data->colorspace);
> +		      spix->colorspace, dpix->colorspace);
>  
>  	sc_set_hs_coeffs(ctx->dev->sc, ctx->sc_coeff_h.addr, src_w, dst_w);
>  	sc_set_vs_coeffs(ctx->dev->sc, ctx->sc_coeff_v.addr, src_h, dst_h);
> @@ -1023,6 +1023,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
>  	struct vpe_fmt *fmt = q_data->fmt;
>  	const struct vpdma_data_format *vpdma_fmt;
>  	int mv_buf_selector = !ctx->src_mv_buf_selector;
> +	struct v4l2_pix_format_mplane *pix;
>  	dma_addr_t dma_addr;
>  	u32 flags = 0;
>  	u32 offset = 0;
> @@ -1032,21 +1033,23 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
>  		vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
>  		dma_addr = ctx->mv_buf_dma[mv_buf_selector];
>  		q_data = &ctx->q_data[Q_DATA_SRC];
> -		stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
> +		pix = &q_data->format.fmt.pix_mp;
> +		stride = ALIGN((pix->width * vpdma_fmt->depth) >> 3,
>  			       VPDMA_STRIDE_ALIGN);
>  	} else {
>  		/* to incorporate interleaved formats */
>  		int plane = fmt->coplanar ? p_data->vb_part : 0;
>  
> +		pix = &q_data->format.fmt.pix_mp;
>  		vpdma_fmt = fmt->vpdma_fmt[plane];
>  		/*
>  		 * If we are using a single plane buffer and
>  		 * we need to set a separate vpdma chroma channel.
>  		 */
> -		if (q_data->nplanes == 1 && plane) {
> +		if (pix->num_planes == 1 && plane) {
>  			dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
>  			/* Compute required offset */
> -			offset = q_data->bytesperline[0] * q_data->height;
> +			offset = pix->plane_fmt[0].bytesperline * pix->height;
>  		} else {
>  			dma_addr = vb2_dma_contig_plane_dma_addr(vb, plane);
>  			/* Use address as is, no offset */
> @@ -1060,7 +1063,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
>  		}
>  		/* Apply the offset */
>  		dma_addr += offset;
> -		stride = q_data->bytesperline[VPE_LUMA];
> +		stride = pix->plane_fmt[VPE_LUMA].bytesperline;
>  	}
>  
>  	if (q_data->flags & Q_DATA_FRAME_1D)
> @@ -1071,7 +1074,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
>  	vpdma_set_max_size(ctx->dev->vpdma, VPDMA_MAX_SIZE1,
>  			   MAX_W, MAX_H);
>  
> -	vpdma_add_out_dtd(&ctx->desc_list, q_data->width,
> +	vpdma_add_out_dtd(&ctx->desc_list, pix->width,
>  			  stride, &q_data->c_rect,
>  			  vpdma_fmt, dma_addr, MAX_OUT_WIDTH_REG1,
>  			  MAX_OUT_HEIGHT_REG1, p_data->channel, flags);
> @@ -1084,6 +1087,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
>  	struct vb2_buffer *vb = &ctx->src_vbs[p_data->vb_index]->vb2_buf;
>  	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>  	struct vpe_fmt *fmt = q_data->fmt;
> +	struct v4l2_pix_format_mplane *pix;
>  	const struct vpdma_data_format *vpdma_fmt;
>  	int mv_buf_selector = ctx->src_mv_buf_selector;
>  	int field = vbuf->field == V4L2_FIELD_BOTTOM;
> @@ -1093,10 +1097,11 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
>  	u32 offset = 0;
>  	u32 stride;
>  
> +	pix = &q_data->format.fmt.pix_mp;
>  	if (port == VPE_PORT_MV_IN) {
>  		vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
>  		dma_addr = ctx->mv_buf_dma[mv_buf_selector];
> -		stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
> +		stride = ALIGN((pix->width * vpdma_fmt->depth) >> 3,
>  			       VPDMA_STRIDE_ALIGN);
>  	} else {
>  		/* to incorporate interleaved formats */
> @@ -1107,10 +1112,10 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
>  		 * If we are using a single plane buffer and
>  		 * we need to set a separate vpdma chroma channel.
>  		 */
> -		if (q_data->nplanes == 1 && plane) {
> +		if (pix->num_planes == 1 && plane) {
>  			dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
>  			/* Compute required offset */
> -			offset = q_data->bytesperline[0] * q_data->height;
> +			offset = pix->plane_fmt[0].bytesperline * pix->height;
>  		} else {
>  			dma_addr = vb2_dma_contig_plane_dma_addr(vb, plane);
>  			/* Use address as is, no offset */
> @@ -1124,7 +1129,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
>  		}
>  		/* Apply the offset */
>  		dma_addr += offset;
> -		stride = q_data->bytesperline[VPE_LUMA];
> +		stride = pix->plane_fmt[VPE_LUMA].bytesperline;
>  
>  		/*
>  		 * field used in VPDMA desc  = 0 (top) / 1 (bottom)
> @@ -1144,7 +1149,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
>  			field = (field + p_data->vb_index + ctx->sequence) % 2;
>  
>  			if (field) {
> -				int height = q_data->height / 2;
> +				int height = pix->height / 2;
>  				int bpp;
>  
>  				if (fmt->fourcc == V4L2_PIX_FMT_NV12 ||
> @@ -1156,7 +1161,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
>  				if (plane)
>  					height /= 2;
>  
> -				dma_addr += q_data->width * height * bpp;
> +				dma_addr += pix->width * height * bpp;
>  			}
>  		}
>  	}
> @@ -1173,7 +1178,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
>  				fmt->fourcc == V4L2_PIX_FMT_NV21))
>  		frame_height /= 2;
>  
> -	vpdma_add_in_dtd(&ctx->desc_list, q_data->width, stride,
> +	vpdma_add_in_dtd(&ctx->desc_list, pix->width, stride,
>  			 &q_data->c_rect, vpdma_fmt, dma_addr,
>  			 p_data->channel, field, flags, frame_width,
>  			 frame_height, 0, 0);
> @@ -1282,7 +1287,7 @@ static void device_run(void *priv)
>  	if (ctx->deinterlacing)
>  		add_out_dtd(ctx, VPE_PORT_MV_OUT);
>  
> -	if (d_q_data->colorspace == V4L2_COLORSPACE_SRGB) {
> +	if (d_q_data->format.fmt.pix_mp.colorspace == V4L2_COLORSPACE_SRGB) {
>  		add_out_dtd(ctx, VPE_PORT_RGB_OUT);
>  	} else {
>  		add_out_dtd(ctx, VPE_PORT_LUMA_OUT);
> @@ -1324,7 +1329,7 @@ static void device_run(void *priv)
>  	}
>  
>  	/* sync on channel control descriptors for output ports */
> -	if (d_q_data->colorspace == V4L2_COLORSPACE_SRGB) {
> +	if (d_q_data->format.fmt.pix_mp.colorspace == V4L2_COLORSPACE_SRGB) {
>  		vpdma_add_sync_on_channel_ctd(&ctx->desc_list,
>  			VPE_CHAN_RGB_OUT);
>  	} else {
> @@ -1559,7 +1564,6 @@ static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
>  	struct vpe_ctx *ctx = file->private_data;
>  	struct vb2_queue *vq;
>  	struct vpe_q_data *q_data;
> -	int i;
>  
>  	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
>  	if (!vq)
> @@ -1569,27 +1573,15 @@ static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
>  	if (!q_data)
>  		return -EINVAL;
>  
> -	pix->width = q_data->width;
> -	pix->height = q_data->height;
> -	pix->pixelformat = q_data->fmt->fourcc;
> -	pix->field = q_data->field;
> +	*f = q_data->format;
>  
> -	if (V4L2_TYPE_IS_OUTPUT(f->type)) {
> -		pix->colorspace = q_data->colorspace;
> -	} else {
> +	if (!V4L2_TYPE_IS_OUTPUT(f->type)) {
>  		struct vpe_q_data *s_q_data;
>  
>  		/* get colorspace from the source queue */
>  		s_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
>  
> -		pix->colorspace = s_q_data->colorspace;
> -	}
> -
> -	pix->num_planes = q_data->nplanes;
> -
> -	for (i = 0; i < pix->num_planes; i++) {
> -		pix->plane_fmt[i].bytesperline = q_data->bytesperline[i];
> -		pix->plane_fmt[i].sizeimage = q_data->sizeimage[i];
> +		pix->colorspace = s_q_data->format.fmt.pix_mp.colorspace;
>  	}
>  
>  	return 0;
> @@ -1736,10 +1728,8 @@ static int vpe_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
>  static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
>  {
>  	struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
> -	struct v4l2_plane_pix_format *plane_fmt;
>  	struct vpe_q_data *q_data;
>  	struct vb2_queue *vq;
> -	int i;
>  
>  	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
>  	if (!vq)
> @@ -1755,29 +1745,18 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
>  		return -EINVAL;
>  
>  	q_data->fmt		= find_format(f);
> -	q_data->width		= pix->width;
> -	q_data->height		= pix->height;
> -	q_data->colorspace	= pix->colorspace;
> -	q_data->field		= pix->field;
> -	q_data->nplanes		= pix->num_planes;
> -
> -	for (i = 0; i < pix->num_planes; i++) {
> -		plane_fmt = &pix->plane_fmt[i];
> -
> -		q_data->bytesperline[i]	= plane_fmt->bytesperline;
> -		q_data->sizeimage[i]	= plane_fmt->sizeimage;
> -	}
> +	q_data->format = *f;
>  
>  	q_data->c_rect.left	= 0;
>  	q_data->c_rect.top	= 0;
> -	q_data->c_rect.width	= q_data->width;
> -	q_data->c_rect.height	= q_data->height;
> +	q_data->c_rect.width	= pix->width;
> +	q_data->c_rect.height	= pix->height;
>  
> -	if (q_data->field == V4L2_FIELD_ALTERNATE)
> +	if (q_data->format.fmt.pix_mp.field == V4L2_FIELD_ALTERNATE)
>  		q_data->flags |= Q_DATA_INTERLACED_ALTERNATE;
> -	else if (q_data->field == V4L2_FIELD_SEQ_TB)
> +	else if (q_data->format.fmt.pix_mp.field == V4L2_FIELD_SEQ_TB)
>  		q_data->flags |= Q_DATA_INTERLACED_SEQ_TB;
> -	else if (q_data->field == V4L2_FIELD_SEQ_BT)
> +	else if (q_data->format.fmt.pix_mp.field == V4L2_FIELD_SEQ_BT)
>  		q_data->flags |= Q_DATA_INTERLACED_SEQ_BT;
>  	else
>  		q_data->flags &= ~Q_IS_INTERLACED;
> @@ -1787,11 +1766,11 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
>  		q_data->c_rect.height /= 2;
>  
>  	vpe_dbg(ctx->dev, "Setting format for type %d, wxh: %dx%d, fmt: %d bpl_y %d",
> -		f->type, q_data->width, q_data->height, q_data->fmt->fourcc,
> -		q_data->bytesperline[VPE_LUMA]);
> -	if (q_data->nplanes == 2)
> +		f->type, pix->width, pix->height, pix->pixelformat,
> +		pix->plane_fmt[0].bytesperline);
> +	if (pix->num_planes == 2)
>  		vpe_dbg(ctx->dev, " bpl_uv %d\n",
> -			q_data->bytesperline[VPE_CHROMA]);
> +			pix->plane_fmt[1].bytesperline);
>  
>  	return 0;
>  }
> @@ -1820,6 +1799,7 @@ static int vpe_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
>  static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
>  {
>  	struct vpe_q_data *q_data;
> +	struct v4l2_pix_format_mplane *pix;
>  	int height;
>  
>  	if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
> @@ -1830,6 +1810,8 @@ static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
>  	if (!q_data)
>  		return -EINVAL;
>  
> +	pix = &q_data->format.fmt.pix_mp;
> +
>  	switch (s->target) {
>  	case V4L2_SEL_TGT_COMPOSE:
>  		/*
> @@ -1860,23 +1842,23 @@ static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
>  	 * the field height, not the buffer height
>  	 */
>  	if (q_data->flags & Q_IS_SEQ_XX)
> -		height = q_data->height / 2;
> +		height = pix->height / 2;
>  	else
> -		height = q_data->height;
> +		height = pix->height;
>  
>  	if (s->r.top < 0 || s->r.left < 0) {
>  		vpe_err(ctx->dev, "negative values for top and left\n");
>  		s->r.top = s->r.left = 0;
>  	}
>  
> -	v4l_bound_align_image(&s->r.width, MIN_W, q_data->width, 1,
> +	v4l_bound_align_image(&s->r.width, MIN_W, pix->width, 1,
>  		&s->r.height, MIN_H, height, H_ALIGN, S_ALIGN);
>  
>  	/* adjust left/top if cropping rectangle is out of bounds */
> -	if (s->r.left + s->r.width > q_data->width)
> -		s->r.left = q_data->width - s->r.width;
> -	if (s->r.top + s->r.height > q_data->height)
> -		s->r.top = q_data->height - s->r.height;
> +	if (s->r.left + s->r.width > pix->width)
> +		s->r.left = pix->width - s->r.width;
> +	if (s->r.top + s->r.height > pix->height)
> +		s->r.top = pix->height - s->r.height;
>  
>  	return 0;
>  }
> @@ -1886,6 +1868,7 @@ static int vpe_g_selection(struct file *file, void *fh,
>  {
>  	struct vpe_ctx *ctx = file->private_data;
>  	struct vpe_q_data *q_data;
> +	struct v4l2_pix_format_mplane *pix;
>  	bool use_c_rect = false;
>  
>  	if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
> @@ -1896,6 +1879,8 @@ static int vpe_g_selection(struct file *file, void *fh,
>  	if (!q_data)
>  		return -EINVAL;
>  
> +	pix = &q_data->format.fmt.pix_mp;
> +
>  	switch (s->target) {
>  	case V4L2_SEL_TGT_COMPOSE_DEFAULT:
>  	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
> @@ -1934,8 +1919,8 @@ static int vpe_g_selection(struct file *file, void *fh,
>  		 */
>  		s->r.left = 0;
>  		s->r.top = 0;
> -		s->r.width = q_data->width;
> -		s->r.height = q_data->height;
> +		s->r.width = pix->width;
> +		s->r.height = pix->height;
>  	}
>  
>  	return 0;
> @@ -2043,14 +2028,14 @@ static int vpe_queue_setup(struct vb2_queue *vq,
>  	if (!q_data)
>  		return -EINVAL;
>  
> -	*nplanes = q_data->nplanes;
> +	*nplanes = q_data->format.fmt.pix_mp.num_planes;
>  
>  	for (i = 0; i < *nplanes; i++)
> -		sizes[i] = q_data->sizeimage[i];
> +		sizes[i] = q_data->format.fmt.pix_mp.plane_fmt[i].sizeimage;
>  
>  	vpe_dbg(ctx->dev, "get %d buffer(s) of size %d", *nbuffers,
>  		sizes[VPE_LUMA]);
> -	if (q_data->nplanes == 2)
> +	if (*nplanes == 2)
>  		vpe_dbg(ctx->dev, " and %d\n", sizes[VPE_CHROMA]);
>  
>  	return 0;
> @@ -2061,14 +2046,16 @@ static int vpe_buf_prepare(struct vb2_buffer *vb)
>  	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>  	struct vpe_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
>  	struct vpe_q_data *q_data;
> -	int i, num_planes;
> +	struct v4l2_pix_format_mplane *pix;
> +	int i;
>  
>  	vpe_dbg(ctx->dev, "type: %d\n", vb->vb2_queue->type);
>  
>  	q_data = get_q_data(ctx, vb->vb2_queue->type);
>  	if (!q_data)
>  		return -EINVAL;
> -	num_planes = q_data->nplanes;
> +
> +	pix = &q_data->format.fmt.pix_mp;
>  
>  	if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
>  		if (!(q_data->flags & Q_IS_INTERLACED)) {
> @@ -2082,18 +2069,18 @@ static int vpe_buf_prepare(struct vb2_buffer *vb)
>  		}
>  	}
>  
> -	for (i = 0; i < num_planes; i++) {
> -		if (vb2_plane_size(vb, i) < q_data->sizeimage[i]) {
> +	for (i = 0; i < pix->num_planes; i++) {
> +		if (vb2_plane_size(vb, i) < pix->plane_fmt[i].sizeimage) {
>  			vpe_err(ctx->dev,
>  				"data will not fit into plane (%lu < %lu)\n",
>  				vb2_plane_size(vb, i),
> -				(long) q_data->sizeimage[i]);
> +				(long) pix->plane_fmt[i].sizeimage);
>  			return -EINVAL;
>  		}
>  	}
>  
> -	for (i = 0; i < num_planes; i++)
> -		vb2_set_plane_payload(vb, i, q_data->sizeimage[i]);
> +	for (i = 0; i < pix->num_planes; i++)
> +		vb2_set_plane_payload(vb, i, pix->plane_fmt[i].sizeimage);
>  
>  	return 0;
>  }
> @@ -2278,6 +2265,7 @@ static int vpe_open(struct file *file)
>  	struct vpe_q_data *s_q_data;
>  	struct v4l2_ctrl_handler *hdl;
>  	struct vpe_ctx *ctx;
> +	struct v4l2_pix_format_mplane *pix;
>  	int ret;
>  
>  	vpe_dbg(dev, "vpe_open\n");
> @@ -2326,23 +2314,32 @@ static int vpe_open(struct file *file)
>  	v4l2_ctrl_handler_setup(hdl);
>  
>  	s_q_data = &ctx->q_data[Q_DATA_SRC];
> +	pix = &s_q_data->format.fmt.pix_mp;
>  	s_q_data->fmt = __find_format(V4L2_PIX_FMT_YUYV);
> -	s_q_data->width = 1920;
> -	s_q_data->height = 1080;
> -	s_q_data->nplanes = 1;
> -	s_q_data->bytesperline[VPE_LUMA] = (s_q_data->width *
> +	pix->pixelformat = s_q_data->fmt->fourcc;
> +	s_q_data->format.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
> +	pix->width = 1920;
> +	pix->height = 1080;
> +	pix->num_planes = 1;
> +	pix->plane_fmt[VPE_LUMA].bytesperline = (pix->width *
>  			s_q_data->fmt->vpdma_fmt[VPE_LUMA]->depth) >> 3;
> -	s_q_data->sizeimage[VPE_LUMA] = (s_q_data->bytesperline[VPE_LUMA] *
> -			s_q_data->height);
> -	s_q_data->colorspace = V4L2_COLORSPACE_REC709;
> -	s_q_data->field = V4L2_FIELD_NONE;
> +	pix->plane_fmt[VPE_LUMA].sizeimage =
> +			pix->plane_fmt[VPE_LUMA].bytesperline *
> +			pix->height;
> +	pix->colorspace = V4L2_COLORSPACE_REC709;
> +	pix->xfer_func = V4L2_XFER_FUNC_DEFAULT;
> +	pix->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> +	pix->quantization = V4L2_QUANTIZATION_DEFAULT;
> +	pix->field = V4L2_FIELD_NONE;
>  	s_q_data->c_rect.left = 0;
>  	s_q_data->c_rect.top = 0;
> -	s_q_data->c_rect.width = s_q_data->width;
> -	s_q_data->c_rect.height = s_q_data->height;
> +	s_q_data->c_rect.width = pix->width;
> +	s_q_data->c_rect.height = pix->height;
>  	s_q_data->flags = 0;
>  
>  	ctx->q_data[Q_DATA_DST] = *s_q_data;
> +	ctx->q_data[Q_DATA_DST].format.type =
> +			V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
>  
>  	set_dei_shadow_registers(ctx);
>  	set_src_registers(ctx);
> 

Re: [Patch v2 19/21] media: v4l2-common: add pixel encoding support

[Hans Verkuil]

On 10/4/19 6:29 PM, Benoit Parrot wrote:
> It is often useful to figure out if a pixel_format is either YUV or RGB
> especially for driver who can perform the pixel encoding conversion.
> 
> Instead of having each driver implement its own "is_this_yuv/rgb"
> function based on a restricted set of pixel value, it is better to do
> this in centralized manner.
> 
> We therefore add a pix_enc member to the v4l2_format_info structure to
> quickly identify the related pixel encoding.
> And add helper function to find/check pixel encoding.
> 
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
>  drivers/media/v4l2-core/v4l2-common.c | 162 ++++++++++++++++----------
>  include/media/v4l2-common.h           |  20 ++++
>  2 files changed, 119 insertions(+), 63 deletions(-)
> 
> diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
> index 62f7aa92ac29..474cdb5863f4 100644
> --- a/drivers/media/v4l2-core/v4l2-common.c
> +++ b/drivers/media/v4l2-core/v4l2-common.c
> @@ -236,77 +236,77 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
>  {
>  	static const struct v4l2_format_info formats[] = {
>  		/* RGB formats */
> -		{ .format = V4L2_PIX_FMT_BGR24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_RGB24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_HSV24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_BGR32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_XBGR32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_BGRX32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_RGB32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_XRGB32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_RGBX32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_HSV32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_ARGB32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_RGBA32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_ABGR32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_BGRA32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_GREY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_BGR24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_RGB24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_HSV24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_BGR32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_XBGR32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_BGRX32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_RGB32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_XRGB32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_RGBX32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_HSV32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_ARGB32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_RGBA32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_ABGR32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_BGRA32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_GREY,    .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
>  
>  		/* YUV packed formats */
> -		{ .format = V4L2_PIX_FMT_YUYV,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_YVYU,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_UYVY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_VYUY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_YUYV,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_YVYU,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_UYVY,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_VYUY,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
>  
>  		/* YUV planar formats */
> -		{ .format = V4L2_PIX_FMT_NV12,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> -		{ .format = V4L2_PIX_FMT_NV21,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> -		{ .format = V4L2_PIX_FMT_NV16,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_NV61,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_NV24,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_NV42,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -
> -		{ .format = V4L2_PIX_FMT_YUV410,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
> -		{ .format = V4L2_PIX_FMT_YVU410,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
> -		{ .format = V4L2_PIX_FMT_YUV411P, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_YUV420,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> -		{ .format = V4L2_PIX_FMT_YVU420,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> -		{ .format = V4L2_PIX_FMT_YUV422P, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_NV12,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> +		{ .format = V4L2_PIX_FMT_NV21,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> +		{ .format = V4L2_PIX_FMT_NV16,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_NV61,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_NV24,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_NV42,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +
> +		{ .format = V4L2_PIX_FMT_YUV410,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
> +		{ .format = V4L2_PIX_FMT_YVU410,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
> +		{ .format = V4L2_PIX_FMT_YUV411P, .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_YUV420,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> +		{ .format = V4L2_PIX_FMT_YVU420,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> +		{ .format = V4L2_PIX_FMT_YUV422P, .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
>  
>  		/* YUV planar formats, non contiguous variant */
> -		{ .format = V4L2_PIX_FMT_YUV420M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> -		{ .format = V4L2_PIX_FMT_YVU420M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> -		{ .format = V4L2_PIX_FMT_YUV422M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_YVU422M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_YUV444M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_YVU444M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
> -
> -		{ .format = V4L2_PIX_FMT_NV12M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> -		{ .format = V4L2_PIX_FMT_NV21M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> -		{ .format = V4L2_PIX_FMT_NV16M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_NV61M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_YUV420M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> +		{ .format = V4L2_PIX_FMT_YVU420M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> +		{ .format = V4L2_PIX_FMT_YUV422M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_YVU422M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_YUV444M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_YVU444M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
> +
> +		{ .format = V4L2_PIX_FMT_NV12M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> +		{ .format = V4L2_PIX_FMT_NV21M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> +		{ .format = V4L2_PIX_FMT_NV16M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_NV61M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
>  
>  		/* Bayer RGB formats */
> -		{ .format = V4L2_PIX_FMT_SBGGR8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SGBRG8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SGRBG8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SRGGB8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SBGGR10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SGBRG10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SGRBG10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SRGGB10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SBGGR10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SGBRG10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SGRBG10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SRGGB10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SBGGR10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SGBRG10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SGRBG10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SRGGB10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SBGGR12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SGBRG12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SGRBG12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> -		{ .format = V4L2_PIX_FMT_SRGGB12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SBGGR8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SGBRG8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SGRBG8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SRGGB8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SBGGR10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SGBRG10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SGRBG10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SRGGB10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SBGGR10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SGBRG10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SGRBG10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SRGGB10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SBGGR10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SGBRG10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SGRBG10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SRGGB10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SBGGR12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SGBRG12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SGRBG12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> +		{ .format = V4L2_PIX_FMT_SRGGB12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
>  	};
>  	unsigned int i;
>  
> @@ -317,6 +317,42 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
>  }
>  EXPORT_SYMBOL(v4l2_format_info);
>  
> +bool v4l2_is_format_rgb(u32 format)
> +{
> +	const struct v4l2_format_info *f;
> +
> +	f = v4l2_format_info(format);
> +	if (f && f->pix_enc == V4L2_ENC_RGB)
> +		return true;
> +
> +	return false;

This can be simplified to:

	return f && f->pix_enc == V4L2_ENC_RGB;

Same for the other two functions below.

> +}
> +EXPORT_SYMBOL(v4l2_is_format_rgb);
> +
> +bool v4l2_is_format_yuv(u32 format)
> +{
> +	const struct v4l2_format_info *f;
> +
> +	f = v4l2_format_info(format);
> +	if (f && f->pix_enc == V4L2_ENC_YUV)
> +		return true;
> +
> +	return false;
> +}
> +EXPORT_SYMBOL(v4l2_is_format_yuv);
> +
> +bool v4l2_is_format_bayer(u32 format)
> +{
> +	const struct v4l2_format_info *f;
> +
> +	f = v4l2_format_info(format);
> +	if (f && f->pix_enc == V4L2_ENC_BAYER)
> +		return true;
> +
> +	return false;
> +}
> +EXPORT_SYMBOL(v4l2_is_format_bayer);

That said, I am not sure I like these three functions. It leads to
usage like this (from patch 21/21):

	if (v4l2_is_format_yuv(src_fmt->fmt.pix_mp.pixelformat) &&
	    v4l2_is_format_rgb(dst_fmt->fmt.pix_mp.pixelformat)) {

which is quite inefficient since v4l2_format_info() is called twice, so
the same for-loop there is also done twice.

I think the caller should just call v4l2_format_info(), then test f->pix_enc.

You can also add something like this to v4l2-common.h:

static inline bool v4l2_is_format_yuv(const struct v4l2_format_info *f)
{
	return f && f->pix_enc == V4L2_ENC_YUV;
}

I'm fine with that.

> +
>  static inline unsigned int v4l2_format_block_width(const struct v4l2_format_info *info, int plane)
>  {
>  	if (!info->block_w[plane])
> diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
> index c070d8ae11e5..27041cf2b818 100644
> --- a/include/media/v4l2-common.h
> +++ b/include/media/v4l2-common.h
> @@ -456,9 +456,25 @@ int v4l2_s_parm_cap(struct video_device *vdev,
>  
>  /* Pixel format and FourCC helpers */
>  
> +/**
> + * enum v4l2_pixel_encoding - specifies the pixel encoding value
> + *
> + * @V4L2_ENC_UNKNOWN:	Pixel encoding is unknown/un-initialized
> + * @V4L2_ENC_YUV:	Pixel encoding is YUV
> + * @V4L2_ENC_RGB:	Pixel encoding is RGB
> + * @V4L2_ENC_BAYER:	Pixel encoding is Bayer
> + */
> +enum v4l2_pixel_encoding {
> +	@V4L2_ENC_UNKNOWN = 0,
> +	V4L2_ENC_YUV = 1,
> +	V4L2_ENC_RGB = 2,
> +	V4L2_ENC_BAYER = 3,
> +};

Just plain _ENC_ is a bit too generic. I'd change this to _PIXEL_ENC_.

> +
>  /**
>   * struct v4l2_format_info - information about a V4L2 format
>   * @format: 4CC format identifier (V4L2_PIX_FMT_*)
> + * @pix_enc: Pixel format encoding (see enum v4l2_pixel_encoding above)

Drop the 'format' word.

>   * @mem_planes: Number of memory planes, which includes the alpha plane (1 to 4).
>   * @comp_planes: Number of component planes, which includes the alpha plane (1 to 4).
>   * @bpp: Array of per-plane bytes per pixel
> @@ -469,6 +485,7 @@ int v4l2_s_parm_cap(struct video_device *vdev,
>   */
>  struct v4l2_format_info {
>  	u32 format;
> +	u8 pix_enc;

I would prefer pixel_enc instead of pix_enc.

>  	u8 mem_planes;
>  	u8 comp_planes;
>  	u8 bpp[4];
> @@ -479,6 +496,9 @@ struct v4l2_format_info {
>  };
>  
>  const struct v4l2_format_info *v4l2_format_info(u32 format);
> +bool v4l2_is_format_rgb(u32 format);
> +bool v4l2_is_format_yuv(u32 format);
> +bool v4l2_is_format_bayer(u32 format);
>  
>  void v4l2_apply_frmsize_constraints(u32 *width, u32 *height,
>  				    const struct v4l2_frmsize_stepwise *frmsize);
> 

Regards,

	Hans

Re: [Patch v2 16/21] media: ti-vpe: vpe: use standard struct instead of duplicating fields

[Benoit Parrot]

Hans Verkuil <hverkuil@xs4all.nl> wrote on Mon [2019-Oct-07 09:57:26 +0200]:
> On 10/4/19 6:29 PM, Benoit Parrot wrote:
> > For each queue we need to maintain resolutions, pixel format,
> > bytesperline, sizeimage, colorspace, etc.
> > 
> > Instead of manually adding more entries in the vpe_q_data struct, it is
> > better to just add a "struct v4l2_format" member and use that to store
> > all needed information.
> > 
> > Signed-off-by: Benoit Parrot <bparrot@ti.com>
> > ---
> >  drivers/media/platform/ti-vpe/vpe.c | 185 ++++++++++++++--------------
> >  1 file changed, 91 insertions(+), 94 deletions(-)
> > 
> > diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
> > index d7f8eb901475..5b1e9908fff2 100644
> > --- a/drivers/media/platform/ti-vpe/vpe.c
> > +++ b/drivers/media/platform/ti-vpe/vpe.c
> > @@ -319,14 +319,9 @@ static struct vpe_fmt vpe_formats[] = {
> >   * there is one source queue and one destination queue for each m2m context.
> >   */
> >  struct vpe_q_data {
> > -	unsigned int		width;				/* frame width */
> > -	unsigned int		height;				/* frame height */
> > -	unsigned int		nplanes;			/* Current number of planes */
> > -	unsigned int		bytesperline[VPE_MAX_PLANES];	/* bytes per line in memory */
> > -	enum v4l2_colorspace	colorspace;
> > -	enum v4l2_field		field;				/* supported field value */
> > +	/* current v4l2 format info */
> > +	struct v4l2_format	format;
> 
> Wouldn't it make more sense to use struct v4l2_pix_format_mplane? That avoid having to
> use the '.fmt.pix_mp' sequence every time you need to access it.

Maybe, I chose "struct v4l2_format" because that is the parameter type used
in all related IOCTL. But I guess I can change it, if it make the code
cleaner :).

Benoit

> 
> Regards,
> 
> 	Hans
> 

Re: [Patch v2 16/21] media: ti-vpe: vpe: use standard struct instead of duplicating fields

[Benoit Parrot]

Hans Verkuil <hverkuil@xs4all.nl> wrote on Mon [2019-Oct-07 09:57:26 +0200]:
> On 10/4/19 6:29 PM, Benoit Parrot wrote:
> > For each queue we need to maintain resolutions, pixel format,
> > bytesperline, sizeimage, colorspace, etc.
> > 
> > Instead of manually adding more entries in the vpe_q_data struct, it is
> > better to just add a "struct v4l2_format" member and use that to store
> > all needed information.
> > 
> > Signed-off-by: Benoit Parrot <bparrot@ti.com>
> > ---
> >  drivers/media/platform/ti-vpe/vpe.c | 185 ++++++++++++++--------------
> >  1 file changed, 91 insertions(+), 94 deletions(-)
> > 
> > diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
> > index d7f8eb901475..5b1e9908fff2 100644
> > --- a/drivers/media/platform/ti-vpe/vpe.c
> > +++ b/drivers/media/platform/ti-vpe/vpe.c
> > @@ -319,14 +319,9 @@ static struct vpe_fmt vpe_formats[] = {
> >   * there is one source queue and one destination queue for each m2m context.
> >   */
> >  struct vpe_q_data {
> > -	unsigned int		width;				/* frame width */
> > -	unsigned int		height;				/* frame height */
> > -	unsigned int		nplanes;			/* Current number of planes */
> > -	unsigned int		bytesperline[VPE_MAX_PLANES];	/* bytes per line in memory */
> > -	enum v4l2_colorspace	colorspace;
> > -	enum v4l2_field		field;				/* supported field value */
> > +	/* current v4l2 format info */
> > +	struct v4l2_format	format;
> 
> Wouldn't it make more sense to use struct v4l2_pix_format_mplane? That avoid having to
> use the '.fmt.pix_mp' sequence every time you need to access it.

Maybe, I chose "struct v4l2_format" because that is the parameter type used
in all related IOCTL. But I guess I can change it, if it make the code
cleaner :).

Benoit

> 
> Regards,
> 
> 	Hans
> 

Re: [Patch v2 19/21] media: v4l2-common: add pixel encoding support

[Benoit Parrot]

Hans Verkuil <hverkuil@xs4all.nl> wrote on Mon [2019-Oct-07 10:06:39 +0200]:
> On 10/4/19 6:29 PM, Benoit Parrot wrote:
> > It is often useful to figure out if a pixel_format is either YUV or RGB
> > especially for driver who can perform the pixel encoding conversion.
> > 
> > Instead of having each driver implement its own "is_this_yuv/rgb"
> > function based on a restricted set of pixel value, it is better to do
> > this in centralized manner.
> > 
> > We therefore add a pix_enc member to the v4l2_format_info structure to
> > quickly identify the related pixel encoding.
> > And add helper function to find/check pixel encoding.
> > 
> > Signed-off-by: Benoit Parrot <bparrot@ti.com>
> > ---
> >  drivers/media/v4l2-core/v4l2-common.c | 162 ++++++++++++++++----------
> >  include/media/v4l2-common.h           |  20 ++++
> >  2 files changed, 119 insertions(+), 63 deletions(-)
> > 
> > diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
> > index 62f7aa92ac29..474cdb5863f4 100644
> > --- a/drivers/media/v4l2-core/v4l2-common.c
> > +++ b/drivers/media/v4l2-core/v4l2-common.c
> > @@ -236,77 +236,77 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
> >  {
> >  	static const struct v4l2_format_info formats[] = {
> >  		/* RGB formats */
> > -		{ .format = V4L2_PIX_FMT_BGR24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_RGB24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_HSV24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_BGR32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_XBGR32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_BGRX32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_RGB32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_XRGB32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_RGBX32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_HSV32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_ARGB32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_RGBA32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_ABGR32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_BGRA32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_GREY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_BGR24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_RGB24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_HSV24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_BGR32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_XBGR32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_BGRX32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_RGB32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_XRGB32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_RGBX32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_HSV32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_ARGB32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_RGBA32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_ABGR32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_BGRA32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_GREY,    .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> >  
> >  		/* YUV packed formats */
> > -		{ .format = V4L2_PIX_FMT_YUYV,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_YVYU,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_UYVY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_VYUY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YUYV,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YVYU,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_UYVY,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_VYUY,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> >  
> >  		/* YUV planar formats */
> > -		{ .format = V4L2_PIX_FMT_NV12,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_NV21,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_NV16,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_NV61,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_NV24,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_NV42,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -
> > -		{ .format = V4L2_PIX_FMT_YUV410,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
> > -		{ .format = V4L2_PIX_FMT_YVU410,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
> > -		{ .format = V4L2_PIX_FMT_YUV411P, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_YUV420,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_YVU420,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_YUV422P, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_NV12,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_NV21,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_NV16,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_NV61,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_NV24,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_NV42,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +
> > +		{ .format = V4L2_PIX_FMT_YUV410,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
> > +		{ .format = V4L2_PIX_FMT_YVU410,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
> > +		{ .format = V4L2_PIX_FMT_YUV411P, .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YUV420,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_YVU420,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_YUV422P, .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> >  
> >  		/* YUV planar formats, non contiguous variant */
> > -		{ .format = V4L2_PIX_FMT_YUV420M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_YVU420M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_YUV422M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_YVU422M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_YUV444M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_YVU444M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
> > -
> > -		{ .format = V4L2_PIX_FMT_NV12M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_NV21M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_NV16M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_NV61M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YUV420M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_YVU420M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_YUV422M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YVU422M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YUV444M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YVU444M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
> > +
> > +		{ .format = V4L2_PIX_FMT_NV12M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_NV21M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_NV16M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_NV61M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> >  
> >  		/* Bayer RGB formats */
> > -		{ .format = V4L2_PIX_FMT_SBGGR8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGBRG8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGRBG8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SRGGB8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SBGGR10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGBRG10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGRBG10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SRGGB10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SBGGR10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGBRG10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGRBG10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SRGGB10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SBGGR10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGBRG10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGRBG10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SRGGB10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SBGGR12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGBRG12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGRBG12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SRGGB12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SBGGR8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGBRG8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGRBG8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SRGGB8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SBGGR10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGBRG10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGRBG10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SRGGB10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SBGGR10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGBRG10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGRBG10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SRGGB10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SBGGR10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGBRG10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGRBG10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SRGGB10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SBGGR12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGBRG12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGRBG12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SRGGB12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> >  	};
> >  	unsigned int i;
> >  
> > @@ -317,6 +317,42 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
> >  }
> >  EXPORT_SYMBOL(v4l2_format_info);
> >  
> > +bool v4l2_is_format_rgb(u32 format)
> > +{
> > +	const struct v4l2_format_info *f;
> > +
> > +	f = v4l2_format_info(format);
> > +	if (f && f->pix_enc == V4L2_ENC_RGB)
> > +		return true;
> > +
> > +	return false;
> 
> This can be simplified to:
> 
> 	return f && f->pix_enc == V4L2_ENC_RGB;
> 
> Same for the other two functions below.

Ok I'll change that.

> 
> > +}
> > +EXPORT_SYMBOL(v4l2_is_format_rgb);
> > +
> > +bool v4l2_is_format_yuv(u32 format)
> > +{
> > +	const struct v4l2_format_info *f;
> > +
> > +	f = v4l2_format_info(format);
> > +	if (f && f->pix_enc == V4L2_ENC_YUV)
> > +		return true;
> > +
> > +	return false;
> > +}
> > +EXPORT_SYMBOL(v4l2_is_format_yuv);
> > +
> > +bool v4l2_is_format_bayer(u32 format)
> > +{
> > +	const struct v4l2_format_info *f;
> > +
> > +	f = v4l2_format_info(format);
> > +	if (f && f->pix_enc == V4L2_ENC_BAYER)
> > +		return true;
> > +
> > +	return false;
> > +}
> > +EXPORT_SYMBOL(v4l2_is_format_bayer);
> 
> That said, I am not sure I like these three functions. It leads to
> usage like this (from patch 21/21):
> 
> 	if (v4l2_is_format_yuv(src_fmt->fmt.pix_mp.pixelformat) &&
> 	    v4l2_is_format_rgb(dst_fmt->fmt.pix_mp.pixelformat)) {

Well it is called twice here because we are checking two different format,
so the loop are ineveitable, I am afraid.

But I guess it is also called in the "else" part in case this fails so it
might get called twice.

> 
> which is quite inefficient since v4l2_format_info() is called twice, so
> the same for-loop there is also done twice.
> 
> I think the caller should just call v4l2_format_info(), then test f->pix_enc.
> 
> You can also add something like this to v4l2-common.h:
> 
> static inline bool v4l2_is_format_yuv(const struct v4l2_format_info *f)
> {
> 	return f && f->pix_enc == V4L2_ENC_YUV;
> }
> 
> I'm fine with that.

I can store the format_info result I guess and use that.

> 
> > +
> >  static inline unsigned int v4l2_format_block_width(const struct v4l2_format_info *info, int plane)
> >  {
> >  	if (!info->block_w[plane])
> > diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
> > index c070d8ae11e5..27041cf2b818 100644
> > --- a/include/media/v4l2-common.h
> > +++ b/include/media/v4l2-common.h
> > @@ -456,9 +456,25 @@ int v4l2_s_parm_cap(struct video_device *vdev,
> >  
> >  /* Pixel format and FourCC helpers */
> >  
> > +/**
> > + * enum v4l2_pixel_encoding - specifies the pixel encoding value
> > + *
> > + * @V4L2_ENC_UNKNOWN:	Pixel encoding is unknown/un-initialized
> > + * @V4L2_ENC_YUV:	Pixel encoding is YUV
> > + * @V4L2_ENC_RGB:	Pixel encoding is RGB
> > + * @V4L2_ENC_BAYER:	Pixel encoding is Bayer
> > + */
> > +enum v4l2_pixel_encoding {
> > +	@V4L2_ENC_UNKNOWN = 0,
> > +	V4L2_ENC_YUV = 1,
> > +	V4L2_ENC_RGB = 2,
> > +	V4L2_ENC_BAYER = 3,
> > +};
> 
> Just plain _ENC_ is a bit too generic. I'd change this to _PIXEL_ENC_.

No problem.

> 
> > +
> >  /**
> >   * struct v4l2_format_info - information about a V4L2 format
> >   * @format: 4CC format identifier (V4L2_PIX_FMT_*)
> > + * @pix_enc: Pixel format encoding (see enum v4l2_pixel_encoding above)
> 
> Drop the 'format' word.

Agreed.

> 
> >   * @mem_planes: Number of memory planes, which includes the alpha plane (1 to 4).
> >   * @comp_planes: Number of component planes, which includes the alpha plane (1 to 4).
> >   * @bpp: Array of per-plane bytes per pixel
> > @@ -469,6 +485,7 @@ int v4l2_s_parm_cap(struct video_device *vdev,
> >   */
> >  struct v4l2_format_info {
> >  	u32 format;
> > +	u8 pix_enc;
> 
> I would prefer pixel_enc instead of pix_enc.

I'll fix that.

Benoit

> 
> >  	u8 mem_planes;
> >  	u8 comp_planes;
> >  	u8 bpp[4];
> > @@ -479,6 +496,9 @@ struct v4l2_format_info {
> >  };
> >  
> >  const struct v4l2_format_info *v4l2_format_info(u32 format);
> > +bool v4l2_is_format_rgb(u32 format);
> > +bool v4l2_is_format_yuv(u32 format);
> > +bool v4l2_is_format_bayer(u32 format);
> >  
> >  void v4l2_apply_frmsize_constraints(u32 *width, u32 *height,
> >  				    const struct v4l2_frmsize_stepwise *frmsize);
> > 
> 
> Regards,
> 
> 	Hans

Re: [Patch v2 19/21] media: v4l2-common: add pixel encoding support

[Benoit Parrot]

Hans Verkuil <hverkuil@xs4all.nl> wrote on Mon [2019-Oct-07 10:06:39 +0200]:
> On 10/4/19 6:29 PM, Benoit Parrot wrote:
> > It is often useful to figure out if a pixel_format is either YUV or RGB
> > especially for driver who can perform the pixel encoding conversion.
> > 
> > Instead of having each driver implement its own "is_this_yuv/rgb"
> > function based on a restricted set of pixel value, it is better to do
> > this in centralized manner.
> > 
> > We therefore add a pix_enc member to the v4l2_format_info structure to
> > quickly identify the related pixel encoding.
> > And add helper function to find/check pixel encoding.
> > 
> > Signed-off-by: Benoit Parrot <bparrot@ti.com>
> > ---
> >  drivers/media/v4l2-core/v4l2-common.c | 162 ++++++++++++++++----------
> >  include/media/v4l2-common.h           |  20 ++++
> >  2 files changed, 119 insertions(+), 63 deletions(-)
> > 
> > diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
> > index 62f7aa92ac29..474cdb5863f4 100644
> > --- a/drivers/media/v4l2-core/v4l2-common.c
> > +++ b/drivers/media/v4l2-core/v4l2-common.c
> > @@ -236,77 +236,77 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
> >  {
> >  	static const struct v4l2_format_info formats[] = {
> >  		/* RGB formats */
> > -		{ .format = V4L2_PIX_FMT_BGR24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_RGB24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_HSV24,   .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_BGR32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_XBGR32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_BGRX32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_RGB32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_XRGB32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_RGBX32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_HSV32,   .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_ARGB32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_RGBA32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_ABGR32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_BGRA32,  .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_GREY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_BGR24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_RGB24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_HSV24,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_BGR32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_XBGR32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_BGRX32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_RGB32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_XRGB32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_RGBX32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_HSV32,   .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_ARGB32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_RGBA32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_ABGR32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_BGRA32,  .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_GREY,    .pix_enc = V4L2_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> >  
> >  		/* YUV packed formats */
> > -		{ .format = V4L2_PIX_FMT_YUYV,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_YVYU,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_UYVY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_VYUY,    .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YUYV,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YVYU,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_UYVY,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_VYUY,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> >  
> >  		/* YUV planar formats */
> > -		{ .format = V4L2_PIX_FMT_NV12,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_NV21,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_NV16,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_NV61,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_NV24,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_NV42,    .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -
> > -		{ .format = V4L2_PIX_FMT_YUV410,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
> > -		{ .format = V4L2_PIX_FMT_YVU410,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
> > -		{ .format = V4L2_PIX_FMT_YUV411P, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_YUV420,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_YVU420,  .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_YUV422P, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_NV12,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_NV21,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_NV16,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_NV61,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_NV24,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_NV42,    .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +
> > +		{ .format = V4L2_PIX_FMT_YUV410,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
> > +		{ .format = V4L2_PIX_FMT_YVU410,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 },
> > +		{ .format = V4L2_PIX_FMT_YUV411P, .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YUV420,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_YVU420,  .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_YUV422P, .pix_enc = V4L2_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> >  
> >  		/* YUV planar formats, non contiguous variant */
> > -		{ .format = V4L2_PIX_FMT_YUV420M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_YVU420M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_YUV422M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_YVU422M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_YUV444M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_YVU444M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
> > -
> > -		{ .format = V4L2_PIX_FMT_NV12M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_NV21M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > -		{ .format = V4L2_PIX_FMT_NV16M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_NV61M,   .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YUV420M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_YVU420M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_YUV422M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YVU422M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YUV444M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_YVU444M, .pix_enc = V4L2_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 },
> > +
> > +		{ .format = V4L2_PIX_FMT_NV12M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_NV21M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_NV16M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_NV61M,   .pix_enc = V4L2_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> >  
> >  		/* Bayer RGB formats */
> > -		{ .format = V4L2_PIX_FMT_SBGGR8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGBRG8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGRBG8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SRGGB8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SBGGR10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGBRG10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGRBG10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SRGGB10,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SBGGR10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGBRG10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGRBG10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SRGGB10ALAW8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SBGGR10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGBRG10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGRBG10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SRGGB10DPCM8,	.mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SBGGR12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGBRG12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SGRBG12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > -		{ .format = V4L2_PIX_FMT_SRGGB12,	.mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SBGGR8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGBRG8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGRBG8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SRGGB8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SBGGR10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGBRG10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGRBG10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SRGGB10,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SBGGR10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGBRG10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGRBG10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SRGGB10ALAW8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SBGGR10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGBRG10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGRBG10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SRGGB10DPCM8,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SBGGR12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGBRG12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SGRBG12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > +		{ .format = V4L2_PIX_FMT_SRGGB12,	.pix_enc = V4L2_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> >  	};
> >  	unsigned int i;
> >  
> > @@ -317,6 +317,42 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
> >  }
> >  EXPORT_SYMBOL(v4l2_format_info);
> >  
> > +bool v4l2_is_format_rgb(u32 format)
> > +{
> > +	const struct v4l2_format_info *f;
> > +
> > +	f = v4l2_format_info(format);
> > +	if (f && f->pix_enc == V4L2_ENC_RGB)
> > +		return true;
> > +
> > +	return false;
> 
> This can be simplified to:
> 
> 	return f && f->pix_enc == V4L2_ENC_RGB;
> 
> Same for the other two functions below.

Ok I'll change that.

> 
> > +}
> > +EXPORT_SYMBOL(v4l2_is_format_rgb);
> > +
> > +bool v4l2_is_format_yuv(u32 format)
> > +{
> > +	const struct v4l2_format_info *f;
> > +
> > +	f = v4l2_format_info(format);
> > +	if (f && f->pix_enc == V4L2_ENC_YUV)
> > +		return true;
> > +
> > +	return false;
> > +}
> > +EXPORT_SYMBOL(v4l2_is_format_yuv);
> > +
> > +bool v4l2_is_format_bayer(u32 format)
> > +{
> > +	const struct v4l2_format_info *f;
> > +
> > +	f = v4l2_format_info(format);
> > +	if (f && f->pix_enc == V4L2_ENC_BAYER)
> > +		return true;
> > +
> > +	return false;
> > +}
> > +EXPORT_SYMBOL(v4l2_is_format_bayer);
> 
> That said, I am not sure I like these three functions. It leads to
> usage like this (from patch 21/21):
> 
> 	if (v4l2_is_format_yuv(src_fmt->fmt.pix_mp.pixelformat) &&
> 	    v4l2_is_format_rgb(dst_fmt->fmt.pix_mp.pixelformat)) {

Well it is called twice here because we are checking two different format,
so the loop are ineveitable, I am afraid.

But I guess it is also called in the "else" part in case this fails so it
might get called twice.

> 
> which is quite inefficient since v4l2_format_info() is called twice, so
> the same for-loop there is also done twice.
> 
> I think the caller should just call v4l2_format_info(), then test f->pix_enc.
> 
> You can also add something like this to v4l2-common.h:
> 
> static inline bool v4l2_is_format_yuv(const struct v4l2_format_info *f)
> {
> 	return f && f->pix_enc == V4L2_ENC_YUV;
> }
> 
> I'm fine with that.

I can store the format_info result I guess and use that.

> 
> > +
> >  static inline unsigned int v4l2_format_block_width(const struct v4l2_format_info *info, int plane)
> >  {
> >  	if (!info->block_w[plane])
> > diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
> > index c070d8ae11e5..27041cf2b818 100644
> > --- a/include/media/v4l2-common.h
> > +++ b/include/media/v4l2-common.h
> > @@ -456,9 +456,25 @@ int v4l2_s_parm_cap(struct video_device *vdev,
> >  
> >  /* Pixel format and FourCC helpers */
> >  
> > +/**
> > + * enum v4l2_pixel_encoding - specifies the pixel encoding value
> > + *
> > + * @V4L2_ENC_UNKNOWN:	Pixel encoding is unknown/un-initialized
> > + * @V4L2_ENC_YUV:	Pixel encoding is YUV
> > + * @V4L2_ENC_RGB:	Pixel encoding is RGB
> > + * @V4L2_ENC_BAYER:	Pixel encoding is Bayer
> > + */
> > +enum v4l2_pixel_encoding {
> > +	@V4L2_ENC_UNKNOWN = 0,
> > +	V4L2_ENC_YUV = 1,
> > +	V4L2_ENC_RGB = 2,
> > +	V4L2_ENC_BAYER = 3,
> > +};
> 
> Just plain _ENC_ is a bit too generic. I'd change this to _PIXEL_ENC_.

No problem.

> 
> > +
> >  /**
> >   * struct v4l2_format_info - information about a V4L2 format
> >   * @format: 4CC format identifier (V4L2_PIX_FMT_*)
> > + * @pix_enc: Pixel format encoding (see enum v4l2_pixel_encoding above)
> 
> Drop the 'format' word.

Agreed.

> 
> >   * @mem_planes: Number of memory planes, which includes the alpha plane (1 to 4).
> >   * @comp_planes: Number of component planes, which includes the alpha plane (1 to 4).
> >   * @bpp: Array of per-plane bytes per pixel
> > @@ -469,6 +485,7 @@ int v4l2_s_parm_cap(struct video_device *vdev,
> >   */
> >  struct v4l2_format_info {
> >  	u32 format;
> > +	u8 pix_enc;
> 
> I would prefer pixel_enc instead of pix_enc.

I'll fix that.

Benoit

> 
> >  	u8 mem_planes;
> >  	u8 comp_planes;
> >  	u8 bpp[4];
> > @@ -479,6 +496,9 @@ struct v4l2_format_info {
> >  };
> >  
> >  const struct v4l2_format_info *v4l2_format_info(u32 format);
> > +bool v4l2_is_format_rgb(u32 format);
> > +bool v4l2_is_format_yuv(u32 format);
> > +bool v4l2_is_format_bayer(u32 format);
> >  
> >  void v4l2_apply_frmsize_constraints(u32 *width, u32 *height,
> >  				    const struct v4l2_frmsize_stepwise *frmsize);
> > 
> 
> Regards,
> 
> 	Hans